K&N Universal Air Filters are engineered for a broad range of high-performance and utility applications, including racing vehicles, snowmobiles, tractors, and generators. These filters provide a versatile solution for custom air intakes, offering a secure fit regardless of intake angle or offset.

Constructed with ultra-strong, molded pliable rubber flanges, the K&N R-0990 is designed to absorb engine vibration and ensure a leak-free seal. The flexible flange material can be stretched up to 1/16 of an inch (1.5mm) to accommodate in-between intake tube sizes for a precise fit.

• Washable & Reusable: Engineered for long-term durability and easy maintenance using K&N cleaning kits.
• Durable Flange: Molded rubber construction provides vibration damping and secure attachment.
• Flexible Sizing: Mounting flange stretches up to 1.5mm (1/16") for versatile installation.
• Part Number: R-0990
• Warranty: 1-Year Limited Warranty

Note: When used to replace a factory air filter, engine jetting modifications may be necessary to maintain the correct air-fuel ratio.

The K&N E-3671 High-Flow Universal Oval Air Filter is engineered to improve engine performance by increasing airflow while maintaining critical filtration standards. This washable, reusable filter replaces restrictive paper elements with K&N’s signature layered, oiled cotton media, designed to capture contaminants more effectively over a longer service life.

Built for durability and ease of maintenance, this filter is designed to fit into compatible oval air cleaner housings and is backed by K&N’s 10-year/million-mile limited warranty. It provides a straightforward upgrade path for enthusiasts looking to maintain superior airflow without needing to replace filters every service interval.

• Manufacturer Part Number: E-3671
• Filter Type: High-Flow Oiled Cotton
• Shape: Oval
• Length: 12 in (305 mm)
• Width: 5.25 in (133 mm)
• Height: 3.25 in (83 mm)
• Warranty: 10-Year / Million Mile Limited
• Maintenance: Washable and reusable

Protect your high-performance engine from track-side dust and pit debris with the K&N Dominator Drag Race Air Filter Assembly. Engineered specifically for the rigors of drag racing, this base-mount scoop filter provides essential filtration without compromising the high-volume airflow required for competitive passes.

This assembly features K&N's signature oiled cotton gauze filter media, designed to capture fine contaminants while maintaining the low restriction necessary for maximum induction. It is built to interface directly with the most common scoop designs used in professional and sportsman drag racing categories.

• Precision Fitment: Specifically designed to fit the K&N 100-8505 scoop or the Harwood 3158 scoop.
• High-Flow Media: Features washable and reusable red cotton gauze for long-lasting performance.
• Dimensions: 9-inch outer diameter (OD) and 5-inch total height (H).
• Design: Base mount configuration provides a secure seal within the scoop housing.
• Manufacturer Part Number: 66-3320R

The K&N X-Stream Air Flow Top filter (MPN 66-3110) replaces the solid lid of your existing round air cleaner assembly to significantly increase total filter surface area. Designed for performance applications, the X-Stream lid features integrated filter media that redirects internal airflow, pulling more volume through the side pleats to reduce restriction and improve intake efficiency.

• Constructed with K&N's signature oiled cotton gauze for high flow and superior filtration
• Washable and reusable design ensures long-term service life
• Reduces intake turbulence by active airflow redirection
• Direct fit for round air cleaners with compatible flange sizing

Specifications:

• Manufacturer Part Number: 66-3110
• Outside Diameter: 11 in (279 mm)
• Flange Inside Diameter: 5.125 in (130 mm)
• Overall Height: 3.5 in (89 mm)
• Filter Material: Cotton Gauze
• Color: Red

Maximize your engine's intake capacity with the K&N X-Stream Air Flow Top. This 14-inch diameter assembly replaces a standard solid filter lid with an active filtration surface, significantly increasing the total filter area. The unique X-Stream design functions by redirecting airflow inside the housing, pulling more air through the side pleats for improved efficiency and intake velocity.

• Part Number: 66-3040
• Outside Diameter: 14 inches (356 mm)
• Neck Flange: 5.125 inches (130 mm)
• Height: 3.063 inches (78 mm)
• Filter Material: Washable and reusable cotton gauze
• Design: Pleated X-Stream top redirects internal airflow
• Maintenance: Fully cleanable using K&N filter recharge kits

The K&N X-Stream Air Flow Top (66-1401XP) replaces the solid lid of a standard 14-inch round air cleaner assembly with a high-flow filter element. This design significantly increases the total surface area of your intake system, allowing your engine to draw air through the top as well as the sides of the filter for improved breathing and volumetric efficiency.

• Directly replaces standard 14-inch diameter round air cleaner tops
• Engineered to provide additional air intake surface area
• Chrome-plated trim for a high-luster finish and corrosion resistance
• Washable and reusable cotton gauze filter media
• Manufacturer Part Number: 66-1401XP
• Includes K&N One Year Limited Warranty

The K&N X-Stream Air Flow Top (66-1101) is engineered to replace the solid top lid of your existing 11-inch round air filter assembly. By replacing a dead-end lid with a functional filtration surface, the X-Stream top significantly increases the total air intake area, allowing your engine to draw more air than a standard configuration.

This filter top features K&N's signature pleated media, providing high-flow performance without compromising filtration efficiency. The black trim provides a clean look for any engine bay, and like all K&N performance filters, this unit is fully washable and reusable for the life of your vehicle.

• Directly replaces standard 11-inch diameter round filter tops
• Increases filtration surface area for improved engine breathing
• Washable and reusable oiled cotton gauze media
• Durable black finish trim
• Manufacturer Part Number: 66-1101
• Includes a One Year Limited Warranty

The K&N 62-2470 Crankcase Vent Filter is engineered for racing applications, vintage restorations, and custom carbureted engine builds. This compact filter provides essential venting for crankcase pressure while preventing contaminants from entering the system. It features a high-quality non-woven synthetic filter media that is fully washable and reusable, offering a significant upgrade over disposable units.

• Construction: Embossed chrome-plated top and base for a classic, high-luster finish.
• Media: Durable non-woven synthetic material designed for repeated cleaning and long-term service.
• Installation: Secure clamp-on design attaches directly to metal or plastic tubing.
• Fitment Spec: 5/16 inch (0.315/0.431) flange diameter, 1.375 inch outer diameter, and 1.5 inch height.
• Part Number: 62-2470

Note: This product is legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. Check specific CARB status for your vehicle on the manufacturer website.

The K&N 62-1600WT crankcase vent filter is engineered for racing applications and vintage carbureted engines requiring external venting. This cone-shaped filter features a durable rubber flange designed to clamp directly onto 3/8-inch (0.375") to 1/2-inch metal or plastic tubing. Constructed with a white synthetic filter media, it provides reliable filtration and can be washed and reused multiple times for a long service life.

• High-Quality Construction: Features a K&N embossed chrome top and a matching chrome base for a professional, classic aesthetic.
• Washable Media: The white synthetic filter media is fully washable and reusable, maintaining performance over time.
• Secure Fit: The 0.375-inch flange ID ensures a tight seal on standard vent lines.
• Part Number: 62-1600WT

Specifications:
Base Outside Diameter: 2 in (51 mm)
Flange Inside Diameter: 0.375 in (10 mm)
Height: 1.75 in (44 mm)
Filter Material: White Synthetic

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

The K&N 62-1600RD Crankcase Vent Filter is engineered for racing applications, vintage engine builds, and custom projects requiring high-quality crankcase ventilation. This cone-shaped filter features a rubber base and an embossed chrome top for a classic look on carbureted engines. The 0.375-inch flange is designed to clamp directly onto 3/8-inch to 1/2-inch metal or plastic tubing wherever venting is required.

Constructed with red synthetic filter media, this unit is fully washable and reusable, providing long-term service life and consistent airflow. It serves as a durable replacement for standard breathers, managing internal pressure while trapping contaminants. Note: This part is legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

• Manufacturer Part Number: 62-1600RD
• Flange Inside Diameter: 0.375 in (9.5 mm)
• Base Outside Diameter: 2 in (51 mm)
• Height: 1.75 in (44 mm)
• Filter Material: Washable Red Synthetic Media
• Top Material: Chrome
• Fitment: Clamps to 3/8" to 1/2" OD tubing

Designed for racing applications and vintage carbureted engines, the K&N 62-1600BL Crankcase Vent Filter provides essential ventilation for your crankcase while maintaining a classic engine bay aesthetic. This cone-shaped filter features an embossed chrome top and base for a premium finish and lasting durability.

The rubber flange is engineered to clamp directly onto metal or plastic tubing ranging from 3/8 inch to 1/2 inch in diameter. Built with high-performance blue synthetic media, this filter is fully washable and reusable, providing a sustainable, high-flow solution for crankcase breathing needs.

• Manufacturer Part Number: 62-1600BL
• Filter Media: Washable Blue Synthetic
• Base Outer Diameter: 2.0 in (51 mm)
• Flange Inner Diameter: 0.375 in (10 mm)
• Overall Height: 1.75 in (44 mm)
• Top Style: Chrome with Embossed K&N Logo
• Application: Clamps to 3/8" to 1/2" metal or plastic tubing

The K&N 62-1560 crankcase vent filter provides efficient ventilation for racing applications, vintage restorations, and classic carbureted engines. Designed for direct installation, this filter features a 0.75-inch flange that clamps securely onto metal or plastic tubing to manage oil vapor and crankcase pressure.

Built for longevity and performance, this filter utilizes non-woven synthetic filter media, allowing it to be washed and reused multiple times. The black rubber top and base provide a clean, professional appearance while ensuring a durable, vibration-resistant seal. Its compact dimensions make it an ideal solution for tight engine bays where standard ventilation systems are impractical.

• Manufacturer Part Number: 62-1560
• Mounting: 0.75 in (19 mm) ID clamp-on flange
• Dimensions: 1.375 in (35 mm) Outside Diameter x 1.125 in (29 mm) Height
• Filter Material: Washable and reusable non-woven synthetic media
• Construction: Molded black rubber top and base
• Compliance: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

The K&N 62-1514 Clamp-On Crankcase Vent Filter is designed for racing applications, vintage restorations, and custom engine builds requiring a direct-mount venting solution. It features a 1.5-inch inside diameter rubber flange that clamps securely onto metal or plastic tubing. To ensure durability in high-temperature environments, this filter includes an integrated deflector shield that protects the media from radiant engine heat.

Constructed with non-woven synthetic filter media, the 62-1514 is fully washable and reusable, providing long-term service life. The unit is finished with an embossed chrome top and a flexible rubber base for a secure, vibration-resistant fit.

• Manufacturer Part Number: 62-1514
• Flange Inside Diameter: 1.5 in (38 mm)
• Outside Diameter: 3 in (76 mm)
• Height: 2.5 in (64 mm)
• Filter Media: Washable non-woven synthetic
• Top Material: Chrome-plated steel
• Attachment: Clamp-on flange (clamp included)

The K&N 62-1513 Crankcase Vent Filter provides critical pressure relief and filtration for racing applications, vintage restorations, and custom carbureted engines. This clamp-on filter is designed to mount directly to 1-3/8 inch metal or plastic tubing where crankcase venting is required.

Built for durability and performance, this filter features a flexible rubber base for a secure seal and a signature K&N embossed chrome top. The non-woven synthetic filter media provides excellent airflow and is fully washable and reusable. To ensure reliable operation in demanding environments, it includes an integrated deflector shield to protect the filter media from radiant engine heat.

• Manufacturer Part Number: 62-1513
• Flange Inside Diameter: 1.375 in (35 mm)
• Outer Diameter: 3 in (76 mm)
• Height: 2.5 in (64 mm)
• Filter Media: Washable non-woven synthetic
• Top Style: Embossed chrome
• Base Material: Black rubber

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. Verify CARB status for your specific vehicle.

Designed to screw directly into threaded Ford valve covers, the K&N 62-1495 crankcase vent filter is an essential component for racing applications, vintage restorations, and classic carbureted engines. This filter provides effective ventilation while adding a finished look to your engine bay with its embossed chrome top and durable rubber base.

Constructed with high-flow, non-woven synthetic filter media, this vent filter is fully washable and reusable, allowing for extended service life through multiple cleanings. The 0.5-inch flange ID ensures a secure fit for compatible threaded applications.

• Manufacturer Part Number: 62-1495
• Flange Inside Diameter: 0.5 in (13 mm)
• Outside Diameter: 3 in (76 mm)
• Height: 3.25 in (83 mm)
• Top Material: Embossed Chrome
• Filter Media: Non-woven Synthetic
• Base Material: Rubber

Note: This product is intended for racing vehicles and classic applications. Check local regulations regarding emissions compliance for highway use.

The K&N 62-1490 Crankcase Vent Filter is designed for high-performance racing applications and vintage carbureted engines requiring reliable valve cover venting. This push-in breather features a classic embossed chrome top and a flexible rubber base, offering a secure, vibration-resistant fit for various automotive builds.

• MPN: 62-1490
• Installation: 1-1/4 inch (32mm) diameter rubber flange designed to push directly into the valve cover
• Dimensions: 3-inch (76mm) outside diameter with a 2-1/2 inch (64mm) overall height
• Filter Media: Washable and reusable synthetic media provides long-term service life
• Construction: Durable rubber base with a decorative chrome-plated steel top
• Warranty: Protected by K&N's One Year Limited Warranty

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

The K&N 62-1480 Crankcase Vent Filter provides essential ventilation for racing applications, vintage engines, and custom builds. Designed for direct fitment, the 1.75-inch rubber flange pushes onto and clamps directly to metal or plastic tubing to allow the crankcase to breathe. This filter features a non-woven synthetic media that is fully washable and reusable, providing long-term service life in demanding environments.

Constructed with an embossed chrome top and a durable rubber base, this filter adds a finished look to carbureted engines while preventing contaminants from entering the crankcase. The included clamp ensures a secure connection even under high-vibration conditions.

• Manufacturer Part Number: 62-1480
• Flange Inside Diameter: 1.75 in (44 mm)
• Outside Diameter: 3 in (76 mm)
• Height: 2.5 in (64 mm)
• Filter Media: Washable Synthetic
• Top Style: Embossed Chrome
• Mounting: Rubber Clamp-on Flange

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

The K&N 62-1470 Crankcase Vent Filter is engineered for racing applications and vintage carbureted engines requiring reliable external venting. This clamp-on filter features a 1.75-inch rubber flange designed to mount directly onto plastic or metal tubing, providing a secure fit for custom breather setups.

Constructed with high-flow synthetic filter media, the 62-1470 is fully washable and reusable, offering a sustainable alternative to disposable filters. The embossed rubber top and base provide a professional appearance under the hood while maintaining structural integrity in high-heat environments.

• Manufacturer Part Number: 62-1470
• Flange Inside Diameter: 1.75 in (44 mm)
• Outside Diameter: 3 in (76 mm)
• Height: 2.5 in (64 mm)
• Top Material: Embossed Rubber
• Filter Media: Washable Synthetic
• Attachment Method: Clamp-on (Hardware included)

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. Check CARB status for specific vehicle applications.

The K&N 62-1460 Crankcase Vent Filter is engineered for racing applications, vintage restorations, and custom engine builds requiring efficient ventilation for metal or plastic tubing. Featuring a 1.5-inch (38mm) internal diameter rubber flange, this filter is designed to push on and clamp directly to the vent source, providing a secure, vibration-resistant seal.

• Durable Construction: Built with a synthetic filter media that provides excellent airflow while capturing contaminants.
• Maintenance: Fully washable and reusable, allowing for a long service life and consistent performance.
• Aesthetics: Finished with an embossed K&N chrome-plated top and a black rubber base for a classic, high-performance look.
• Specifications: 1.5-inch Flange ID, 3-inch Outside Diameter, and 2.5-inch Height.

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. Manufacturer Part Number: 62-1460.

The K&N 62-1450 Crankcase Vent Filter provides essential ventilation for racing applications, vintage restorations, and custom carbureted engines. Designed for performance and durability, this filter features a 1.5-inch diameter rubber flange that pushes onto and clamps directly to metal or plastic tubing. The construction utilizes high-flow, non-woven synthetic filter media protected by a durable embossed rubber top and base.

As a sustainable performance solution, the synthetic media in the 62-1450 is fully washable and reusable. This clamp-on filter is an ideal choice for venting crankcase pressure while preventing contaminants from entering the engine. This product is backed by K&N’s One Year Limited Warranty.

• Manufacturer Part Number: 62-1450
• Flange Inside Diameter: 1.5 in (38 mm)
• Outside Diameter: 3 in (76 mm)
• Height: 2.5 in (64 mm)
• Filter Material: Non-woven synthetic
• Top/Base Material: Rubber
• Mounting Style: Clamp-on flange (clamp included)

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

The K&N 62-1440 Crankcase Vent Filter is engineered for racing applications and classic carbureted engines that require efficient crankcase ventilation. This filter relieves internal pressure while preventing contaminants from entering the engine. It features a high-quality synthetic filter media that is fully washable and reusable, providing a long-lasting alternative to disposable breathers.

Built with a professional finish, the 62-1440 includes an embossed chrome-plated steel top and a flexible black rubber base. Designed to push on to existing 1-3/8 inch rubber breather grommets, it provides a secure fit for vintage or performance setups where aesthetics and airflow are equally critical.

• Manufacturer Part Number: 62-1440
• Flange Inside Diameter: 1.375 in (35 mm)
• Outside Diameter: 3 in (76 mm)
• Height: 2.5 in (64 mm)
• Top Material: Chrome-plated steel
• Filter Media: Washable synthetic
• Mounting Style: Push-on

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

The K&N 62-1430 crankcase vent filter is designed for racing applications, vintage restorations, and custom carbureted engines requiring efficient crankcase ventilation. This filter features a durable black rubber top and base for a clean, classic aesthetic under the hood.

Constructed with K&N’s signature oil-impregnated cotton gauze media, this breather provides excellent filtration while maintaining high airflow. The 1.375-inch (35mm) ID flange is engineered to push directly into existing rubber breather grommets for a secure fit. As a washable and reusable component, it offers long-term serviceability compared to disposable paper breathers.

• Manufacturer Part Number: 62-1430
• Flange Inside Diameter: 1.375 in (35 mm)
• Outside Diameter: 3 in (76 mm)
• Height: 2.5 in (64 mm)
• Filter Material: Cotton Gauze
• Top/Base Material: Black Rubber
• Included Accessories: 14.79 milliliter oil pillow-pack for servicing

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. Check specific CARB status for your vehicle on the manufacturer website.

The K&N 62-1410 Crankcase Vent Filter is engineered for engine builders and enthusiasts requiring a reliable breather for racing or classic carbureted applications. Constructed with a durable black rubber base and top, this filter is built to withstand the rigorous heat and vibration of a high-performance engine bay. The 1-inch mounting flange allows for a direct push-on fit into standard rubber breather grommets, providing a secure seal for crankcase ventilation.

This filter utilizes advanced synthetic media that provides excellent filtration and airflow. Unlike disposable units, the 62-1410 media is completely washable and reusable, ensuring long-term serviceability. It is a functional and aesthetic upgrade for vintage valve covers or custom racing setups.

• Manufacturer Part Number: 62-1410
• Flange Inside Diameter: 1 in (25 mm)
• Outside Diameter: 3 in (76 mm)
• Height: 2.375 in (60 mm)
• Filter Media: Washable Synthetic
• Top/Base Material: Black Rubber
• Mounting: Push-on

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

Manage crankcase pressure and improve engine bay aesthetics with the K&N 62-1390 Crankcase Vent Filter. Designed for racing applications and classic carbureted setups, this filter replaces bulky breather tubes by pushing directly into existing 1-1/4 inch rubber valve cover grommets for a clean, functional install.

Built for longevity, the 62-1390 utilizes a non-woven synthetic filter media that is fully washable and reusable, ensuring it remains the last breather you need to buy. The assembly is finished with a signature embossed chrome-plated steel top for a show-quality look and a durable black rubber base designed to withstand high engine bay temperatures.

• Filter Media: Washable and reusable non-woven synthetic
• Top Finish: Embossed chrome-plated steel
• Base Material: Black rubber push-in flange
• Flange Inside Diameter: 1.25 in (32 mm)
• Outside Diameter: 3 in (76 mm)
• Height: 2.5 in (64 mm)
• Manufacturer Part Number: 62-1390

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

The K&N 62-1380 Crankcase Vent Filter is a technical filtration solution engineered for racing applications, vintage restorations, and custom carbureted engine builds. This clamp-on filter features a durable black rubber top and base, housing K&N’s signature oiled cotton media for superior airflow and filtration efficiency. Designed to mount directly onto a vent tube or outlet, it provides a clean, professional finish while managing crankcase pressures.

• Manufacturer Part Number: 62-1380
• Flange Inside Diameter: 1.25 in (32 mm)
• Outside Diameter: 3 in (76 mm)
• Height: 2.5 in (64 mm)
• Filter Media: Washable and reusable oiled cotton gauze
• Top/Base Material: Black Rubber
• Included Hardware: 14.79 ml pillow-pack of air filter oil
• Installation: Clamp-on design for vent tubes or outlets

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

The K&N 62-1370 Crankcase Vent Filter is engineered for racing applications, vintage restorations, and custom carbureted engine builds requiring reliable crankcase ventilation. This filter features an embossed chrome-plated steel top for a classic aesthetic and a durable black rubber base designed to withstand engine bay heat.

Equipped with a 1-inch diameter zinc tube, this vent filter is designed to push onto and clamp directly to metal or plastic tubing. The synthetic filter media provides excellent filtration while remaining fully washable and reusable, ensuring long-term serviceability. It effectively prevents debris from entering the crankcase while allowing internal pressure to escape.

• Manufacturer Part Number: 62-1370
• Flange Inside Diameter: 1 in (25 mm)
• Outside Diameter: 2 in (51 mm)
• Height: 1.5 in (38 mm)
• Top Material: Chrome-plated steel
• Base/Flange: Black rubber with zinc tube
• Filter Media: Washable synthetic

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

K&N crankcase vent filters are engineered for racing applications and vintage carbureted engines that require efficient ventilation and a clean, classic aesthetic. The 62-1360 vent filter features an embossed, chrome-plated steel top paired with a durable black rubber base for a professional engine bay appearance.

This filter utilizes a 3/4-inch diameter zinc tube designed to push directly onto metal or plastic tubing. It is constructed with high-flow, non-woven synthetic filter media that is completely washable and reusable, providing a long service life without the need for frequent replacements. Note: This part is legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

• Inlet Diameter: 3/4 in (19 mm)
• Outside Diameter: 2 in (51 mm)
• Height: 1.5 in (38 mm)
• Filter Media: Non-woven synthetic (Washable/Reusable)
• Top Material: Chrome-plated steel
• Base Material: Black rubber with zinc tube
• MPN: 62-1360

The K&N 62-1340 crankcase vent filter is engineered for racing applications, vintage restorations, and custom carbureted engine builds requiring external ventilation. This clamp-on filter mounts directly to metal or plastic tubing to provide clean, efficient venting while maintaining a classic aesthetic.

Each filter features a 5/8-inch zinc tube designed to push into or clamp onto existing ventilation lines. The assembly is topped with an embossed chrome-plated steel cover and a durable black rubber base. Utilizing synthetic filter media, the 62-1340 is fully washable and reusable, allowing for easy maintenance and long-term durability in high-performance environments.

• Manufacturer Part Number: 62-1340
• Mounting Tube Diameter: 0.625 in (16 mm)
• Outside Diameter: 2 in (51 mm)
• Overall Height: 1.5 in (38 mm)
• Filter Media: Synthetic (Washable and Reusable)
• Top Plate: Chrome-plated steel
• Base Material: Black rubber

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. Check CARB status for specific vehicle applications.

The K&N 62-1330 Clamp-On Crankcase Vent Filter provides essential pressure relief for racing applications, vintage restorations, and custom carbureted engines. This filter is designed for direct installation onto metal or plastic tubing where crankcase venting is required, preventing contaminants from entering the system while allowing gases to escape.

Constructed for durability and style, the 62-1330 features a chrome-plated steel top embossed with the K&N logo and a flexible black rubber base. The 1/2-inch zinc tube flange allows for a secure push-on fitment. Unlike disposable alternatives, this filter utilizes a synthetic media that is fully washable and reusable, maintaining performance over the life of the vehicle.

• Manufacturer Part Number: 62-1330
• Flange Internal Diameter: 0.5 in (13 mm)
• Outside Diameter: 2 in (51 mm)
• Height: 1.5 in (38 mm)
• Top Material: Chrome-plated steel
• Filter Media: Washable synthetic
• Mounting: Zinc tube flange for clamp-on or push-on use

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

The K&N 62-1320 Crankcase Vent Filter provides essential ventilation for racing applications, vintage restorations, and custom carbureted engines. This universal-fit, clamp-on filter is designed to secure directly to 3/8-inch metal or plastic tubing where crankcase venting is required.

Built with a durable black rubber base and a washable synthetic filter media, this component is designed for long-term reuse. The filter is topped with an embossed, chrome-plated steel cap, providing a clean, classic aesthetic for engine bays. Every 62-1320 filter is backed by K&N's one-year limited warranty.

• Manufacturer Part Number: 62-1320
• Flange Inside Diameter: 0.375 in (10 mm)
• Outside Diameter: 2 in (51 mm)
• Height: 1.5 in (38 mm)
• Filter Media: Washable synthetic
• Top Material: Chrome-plated steel
• Base Material: Black rubber

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. Check CARB status for your specific vehicle before purchase.