Fits select 2008-2023 Subaru WRX and STI models equipped with the PERRIN 22mm rear sway bar.

Maintain the precision and quiet operation of your rear suspension with this genuine PERRIN Performance replacement bushing. Over time, polyurethane bushings can wear or harden due to road grime, heat, and friction, which can lead to suspension squeaks or diminished sway bar effectiveness. This replacement component is designed to restore the tight tolerances required for predictable cornering and handling.

• Bore Diameter: 22mm
• Material: High-durometer polyurethane for durability and response
• Compatibility: Specifically designed for PERRIN rear sway bar kit part number PSP-SUS-232
• Application: Rear Sway Bar
• Quantity: Sold individually

Restore your suspension's performance and eliminate unwanted play with a PERRIN 25mm replacement sway bar bushing. Over time, sway bar bushings can wear, soften, or crack, leading to sloppy handling and annoying suspension squeaks. This replacement component is designed to provide a precise fit for 25mm diameter sway bars, ensuring the bar remains securely anchored to the chassis for immediate cornering response and reduced body roll.

• Direct replacement for PERRIN 25mm sway bar bushings
• Sized for 25mm diameter sway bars
• Reduces suspension deflection and improves handling consistency
• Helps eliminate clunking or noise caused by worn-out bushings

Fits 2000-2005 Mitsubishi Eclipse (GS, GT, GTS, RS, and Spyder models).

Prothane polyurethane sway bar bushings provide a performance upgrade over factory rubber, which often softens, cracks, and loses its shape over time. These 19mm bushings for "A" style brackets restore predictable handling and minimize body roll by keeping the sway bar securely located during cornering. Precision-molded from high-performance polyurethane, they are engineered to withstand road grime, oil, and heat significantly better than OEM components.

• Bore Diameter: 19mm
• Bracket Type: A Bracket
• Material: High-durometer red polyurethane
• Resistant to oil, grease, and road salt
• Direct replacement for worn or degraded factory bushings
• Manufacturer Part Number: 19-1118

Prothane universal sway bar bushings are engineered to improve vehicle handling and stability by replacing soft, prone-to-failure factory rubber with high-performance polyurethane. These 3/4-inch bushings provide a firmer pivot point for the sway bar, effectively reducing body roll during cornering and maintaining better alignment under load.

The polyurethane construction is resistant to oil, road salt, and environmental contaminants that typically degrade rubber, ensuring a much longer service life and consistent performance. Designed for use with A-style brackets, these bushings are a reliable solution for custom suspension setups or restoring precision to a worn chassis.

• Bore Diameter: 3/4 inch
• Bracket Style: A Bracket
• Material: Precision-molded polyurethane
• Color: Black
• Part Number: 19-1106-BL
• Improves steering response and minimizes sway

Fits select 2007-2023 Ford Expedition, 2015-2020 Ford F-150, and 2007-2023 Lincoln Navigator.

Sway bar mount bushings are critical for anchoring the sway bar and maintaining proper chassis control. Over time, original equipment rubber bushings soften and deteriorate, leading to excessive body roll and a vague, sloppy steering feel. This SuperPro bushing kit provides a high-performance upgrade to restore and improve handling precision without the need for generic or universal hardware.

These bushings are engineered to integrate seamlessly into factory mounting points. Featuring advanced grease retention technology, the internal bore is designed to hold lubricant longer, ensuring smooth, silent operation for the life of the vehicle. By replacing soft OE rubber with SuperPro's specialized material, you ensure your sway bar operates at its full potential for improved stability and cornering response.

• Bore Diameter: 36mm
• Precision engineered for exact fitment in factory housing
• Internal grease grooves for long-term noise reduction
• High-durability material resists deformation under high load
• One-time upgrade eliminates frequent bushing maintenance
• Manufacturer Part Number: SPF5786K

Fits select 1980-1994 Subaru Brat, DL, GL, GL-10, GLF, Standard, XT, Justy, Loyale, and RX models.

Sway bar mount bushings are critical for anchoring your sway bars and maintaining precise body control. Over time, factory rubber bushings degrade, leading to a loose, unresponsive steering feel and decreased handling performance. SuperPro sway bar mount bushings are engineered to replace worn OE components, integrating seamlessly with your factory mounting hardware for a precise fit.

Constructed from high-grade polyurethane, these bushings feature advanced grease retention technology to ensure smooth, silent operation for the life of the vehicle. By upgrading to SuperPro, you eliminate a frequent maintenance item and restore your Subaru's handling stability on and off the road.

• Direct replacement for factory front sway bar mount bushings
• Advanced grease retention grooves for long-lasting, silent lubrication
• Maintains alignment and improves steering response under load
• Designed to work with original equipment hardware and mountings
• Manufacturer Part Number: SPF1099-17K

Fits select 1997-2006 Honda CR-V, 2000-2005 Honda Civic, and 2002-2006 Acura RSX.

Whiteline Plus sway bar mount bushings are a critical suspension service item designed to replace worn or soft factory rubber. These bushings utilize a high-grade synthetic elastomer formulation that offers superior resistance to oil, grease, ozone, and weathering compared to OE components. By maintaining tighter tolerances, they ensure the sway bar performs as intended, improving chassis balance and steering predictability.

• Precision Design: Features internal bore knurling and grease retention lips to provide continual self-lubrication and minimize friction.
• Premium Material: Synthetic elastomer construction provides the durability of polyurethane with the ride quality characteristics of rubber.
• Extended Service Life: Includes extreme pressure molybdenum disulphide (LM) based grease to prevent squeaking and ensure longevity.
• Critical Fitment Note: Designed for 20mm diameter sway bars; please measure your vehicle's sway bar before installation to confirm sizing.
• Manufacturer Part Number: W23378

Fits select 2017-2026 Tesla Model 3 and Model Y equipped with a Whiteline performance front sway bar.

Maintain the performance of your Whiteline 30mm front sway bar (BTF101Z) with the KSK133-30 sway bar service kit. These mount bushings are manufactured using the latest synthetic elastomer technology, engineered to synchronize your suspension system for improved handling, better ride quality, and extended service life. The internal diameter features a specialized knurled design, specifically created to retain grease and ensure quiet, low-maintenance operation even under high-load cornering.

• Specifically designed to fit the Whiteline 30mm BTF101Z performance sway bar
• High-grade synthetic elastomer material resists environmental degradation
• Knurled internal diameter (ID) maximizes grease retention and minimizes noise
• Restores handling precision and reduces suspension play
• Kit contains: (2) 30mm replacement bushings
• Manufacturer Part Number: KSK133-30

Fits 2013-2020 Subaru BRZ, 2013-2016 Scion FR-S, and 2017-2020 Toyota 86.

Restore chassis response and maintain sway bar efficiency with the Whiteline 16mm Rear Sway Bar Mount Bushing. Over time, factory rubber bushings perish, leading to play in the suspension and reduced handling precision. This replacement bushing kit is engineered to provide a secure, stable mounting point, ensuring your rear sway bar performs as intended during cornering and weight transfer.

• Advanced Material: Features a proprietary synthetic elastomer formulation resistant to oil, grease, ozone, and environmental weathering for a long service life.
• Precise Fitment: Designed for 16mm sway bar diameters, ensuring a snug fit to the factory mounting brackets.
• Easy Installation: Engineered for a straightforward bolt-on process that does not require specialized shop tools; includes a detailed installation guide.
• Manufacturer Part Number: KSK106-16
• Bore Size: 16mm

Eliminate unwanted suspension play and restore handling precision with the SuperPro SPF1450-24K Sway Bar Mount Bushing Kit. Factory rubber bushings are prone to deflection and deterioration over time, allowing the sway bar to shift within the mount. This movement delays the anti-roll bar's engagement, leading to sluggish steering response and increased body roll during cornering.

These high-performance bushings are engineered from SuperPro's proprietary polyurethane formula, providing a more rigid and durable mounting point than OE rubber. By securing the bar more effectively, this kit ensures that lateral forces are immediately transferred through the sway bar, maximizing its effectiveness. The material is resistant to oils, grease, and road contaminants that typically break down standard rubber components.

• Fits 24mm diameter sway bars
• Designed for 35mm tall mounting brackets
• Reduces sway bar deflection for improved chassis control
• Engineered for long-term durability and resistance to environmental factors
• Manufacturer Part Number: SPF1450-24K

Fits select 1964-2002 Buick, Chevrolet, Ford, Mercury, and Pontiac models.

This Prothane Universal Sway Bar End Link Set is designed to restore and improve suspension stability by replacing soft, compliant factory rubber bushings with high-performance polyurethane. These 4.5-inch mounting length links provide a more direct connection between the sway bar and the control arm, effectively reducing body roll and improving steering response during cornering. The durable polyurethane construction is resistant to oil, road grime, and atmospheric rot, ensuring the bushings maintain their shape and effectiveness far longer than OEM components.

• Manufacturer Part Number: 19-409-BL
• Mounting Length: 4.5 inches (4 1/2in)
• Bushing Material: High-grade black polyurethane
• Finish: Black
• Includes: Complete set for both sides including bolts, washers, and spacers
• Performance: Increases chassis rigidity and improves handling geometry

Fits 2014-2018 Subaru Forester (2.0XT / 2.5i).

Restore the responsiveness and precision of your vehicle's suspension with the Whiteline Sway Bar Mount Bushing Service Kit. Engineered specifically for 26mm sway bars, these bushings replace worn or compliant OE rubber components that lead to handling degradation and unwanted suspension noise. Using an advanced synthetic elastomer formulation, these bushings maintain their shape and performance under high loads while resisting the chemical breakdown often caused by oil, grease, and ozone.

• Precision fit for 26mm sway bars to ensure optimal clamping and reduced deflection.
• Advanced material formulation provides superior resistance to oil, grease, ozone, and harsh weathering.
• Integrated internal grease reservoirs provide continual self-lubrication for long-term friction management.
• Designed for a straightforward installation that minimizes the need for specialized shop tools.
• Includes detailed installation instructions to ensure proper fitment and performance.
• Manufacturer Part Number: KSK109-26

Fitment Table

Fits 2000-2005 Toyota Celica GT and GTS.

Replace soft factory rubber with Prothane high-performance polyurethane sway bar bushings to sharpen your vehicle's steering response and handling. These red bushings are engineered to fit 17mm diameter sway bars utilizing "A" style brackets. Unlike original equipment rubber that can perish and distort under load, Prothane's polyurethane formula resists compression and environmental contaminants to keep your sway bar properly indexed for reduced body roll during hard cornering.

• Manufacturer Part Number: 19-1116
• Bore Diameter: 17mm
• Bracket Type: Fits "A" Style Brackets
• Material: High-durometer polyurethane
• Finish: Red

Prothane Universal Sway Bar Bushings are a high-performance alternative to soft, factory-installed rubber bushings. These components are molded from specialized polyurethane to eliminate the excessive deflection and "slop" that develops in a vehicle's suspension over time, providing more consistent handling and improved roll stiffness.

• Precision Handling: Reduces sway bar play for better cornering stability and steering response.
• Polyurethane Durability: Highly resistant to road salt, oil, and grease that typically degrade rubber bushings.
• Application Specs: 1-inch (25.4mm) inner diameter designed specifically for Prothane "A" style mounting brackets.
• Distinctive Finish: Molded in Prothane’s signature red polyurethane for easy inspection and a custom look.
• Manufacturer Part Number: 19-1110

Fits 1996-2001 Toyota 4Runner (Base, Limited, and SR5).

Restore the handling and cornering stability of your vehicle with Prothane rear sway bar bushings. Factory rubber bushings are prone to cracking and distortion over time, leading to excessive body roll and a disconnected feel in the chassis. These 19mm replacements are engineered from high-grade polyurethane, which is significantly more durable than OE rubber and resistant to road oils, salt, and weather.

By maintaining a firmer grip on the sway bar, these bushings minimize deflection and ensure the stabilizer bar performs as intended during weight transfer. This is a direct-fit upgrade that mounts into the factory locations for a precise fit.

• Manufacturer Part Number: 18-1116-BL
• Material: High-performance polyurethane
• Bushing Diameter: 19mm
• Color: Black
• Location: Rear Sway Bar

Fits select 2006-2016 Volkswagen Golf, GTI, Golf R, Jetta, Rabbit, and R32 (1.8T / 2.0T).

Whiteline front sway bar mount bushings are engineered to improve suspension response and eliminate the excessive play common with aged factory rubber components. These bushings are manufactured from a high-grade synthetic elastomer formulation designed to resist oil, grease, ozone, and harsh weather conditions. A standout feature is the high-performance PTFE inner lining, which creates an exceptionally low coefficient of friction. This lining facilitates a "grease-free" operation by reducing the need for lubrication during installation. For maximum service life, these bushings include internal grease reservoirs and are supplied with molybdenum disulphide (LM) based grease.

• Manufacturer Part Number: W23618
• Inner Diameter: 23.6mm
• Material: Advanced Synthetic Elastomer
• Lining: PTFE inner lining for low friction
• Grease-free technology reduces maintenance
• Internal reservoirs for self-lubrication
• Resistant to ozone and weathering
• Includes molybdenum disulphide (LM) based grease

Fits 2003-2008 Mitsubishi Lancer Evolution including GSR, MR, RS, and SE models.

Replace worn factory rubber mounts with the Whiteline Plus Rear Sway Bar Bushing Set to restore chassis precision and improve handling. These 22mm bushings are engineered from a high-grade synthetic elastomer that provides the durability of a solid mount with the compliance needed for street and track use. Unlike standard rubber, this material is resistant to oil, grease, ozone, and weathering, ensuring a long service life without degradation.

Designed for low-maintenance performance, the internal bore features knurling and grease retention lips. These reservoirs act as a self-lubrication system, managing friction and preventing the common squeaking associated with aftermarket bushings. Each set is supplied with extreme pressure molybdenum disulphide (LM) based grease for a quiet, smooth-acting suspension setup.

• Bushing Diameter: 22mm
• Material: High-durability synthetic elastomer
• Internal bore knurling for optimum grease retention
• Resistant to chemicals and environmental weathering
• Includes molybdenum disulphide (LM) grease
• Manufacturer Part Number: W22959

Fits select 1982-2004 Chevrolet Blazer and S10, GMC Jimmy, S15, and Sonoma, and Oldsmobile Bravada.

Restore the handling precision of your GM truck or SUV with the Energy Suspension Hyper-Flex greaseable sway bar bushing set. Factory rubber bushings are prone to cracking, rotting, and distortion under load, which leads to sloppy steering and excessive body roll. This kit replaces those soft components with firm, high-performance polyurethane to ensure your sway bar operates at maximum efficiency.

Formulated from Energy Suspension’s signature Hyper-Flex polyurethane, these bushings offer superior resistance to under-car contaminants like oil, salt, and road grime. The greaseable design features integrated Zerk fittings on the heavy-duty brackets, allowing for easy lubrication to prevent squeaks and ensure smooth operation without requiring disassembly.

• Bushing Diameter: 1-1/8in (28.5mm)
• Material: Hyper-Flex Polyurethane
• Finish: Black
• Greaseable design with Zerk fittings for easy maintenance
• Increases sway bar effectiveness and steering response
• Manufacturer Part Number: 3.5190G

Fits select 2006-2018 Audi A3, TT, and Volkswagen Eos, Golf, GTI, Jetta, Passat, Rabbit, and Tiguan (2.0T).

Restore steering precision and handling consistency with the Whiteline 24mm Front Sway Bar Mount Bushing. Engineered to replace soft or deteriorated factory rubber, this bushing kit utilizes a specialized synthetic elastomer formulation that maintains its shape under high cornering loads while offering superior resistance to environmental contaminants.

• Bore Size: 24mm
• Material: Advanced synthetic elastomer formulation
• Environmental Resistance: Resistant to oil, grease, ozone, and weathering
• Installation: Designed for easy installation without the need for specialized tools
• Manufacturer Part Number: KSK073-24
• Included: Pair of sway bar bushings and detailed installation guide

Fits 2008-2017 Pontiac G8 and Chevrolet SS.

The Whiteline Sway Bar Service Kit (MPN: KSK071-26) features a 26mm bushing set engineered to restore or enhance your vehicle's suspension performance. These bushings utilize an advanced synthetic elastomer formulation designed to resist degradation from oil, grease, ozone, and harsh weathering, ensuring a significantly longer service life than standard rubber components.

• Precision-engineered 26mm internal diameter for a secure fit on the factory stabilizer bar.
• Material technology resists oil, grease, and environmental contaminants to prevent softening or cracking.
• Designed for straightforward installation at home without the need for specialized shop tools.
• Includes a detailed installation guide to assist with the service process.
• Direct replacement for worn or contaminated OE sway bar bushings.

Fits select 1960-1993 Chevrolet Corvette and Impala, Ford Mustang and Falcon, Mazda B-Series and RX-7, Toyota Corolla and Cressida, and Daihatsu Rocky.

The SuperPro SPF1450-22K sway bar mount bushing set is engineered to restore precision to your front suspension system. Over time, factory rubber bushings degrade, leading to excessive deflection, body roll, and a vague steering feel. These 22mm bushings provide a high-performance alternative, anchoring the sway bar to ensure it functions at its intended rate for flatter cornering and improved chassis response.

Designed to integrate seamlessly with factory mounting hardware, these bushings eliminate the need for universal-fit components. Each bushing features advanced grease retention technology, ensuring a lifetime of silent, maintenance-free operation while preventing the squeaking often associated with inferior aftermarket upgrades.

• Bore Diameter: 22mm
• Direct replacement for OE rubber bushings in factory mountings
• Advanced grease retention grooves for smooth, silent operation
• Improves steering feedback and lateral stability
• Includes necessary bushings for a complete front mount replacement
• Manufacturer Part Number: SPF1450-22K

Fits select 1984-2018 Jeep Cherokee and Wrangler (including JK/JKU) models equipped with a 25mm rear sway bar. These bushings are engineered to replace soft, worn factory rubber that often leads to body roll and a vague steering feel.

SuperPro sway bar mount bushings provide a precise fit for your vehicle's factory mounting brackets and hardware. Unlike generic universal bushings, these are specifically molded to integrate with the OE suspension design, ensuring proper alignment and bar rotation. Each bushing features advanced grease retention technology, utilizing internal grooves to keep lubricant where it is needed most for silent, maintenance-free operation over the life of the vehicle.

• Manufacturer Part Number: SPF1138-25K
• Bushing Diameter: 25mm
• Position: Rear
• Material: High-grade proprietary polyurethane
• Direct replacement for OE rubber bushings
• Engineered for improved body control and handling response

Fits select 1986-2001 Acura and Honda models, including Integra, Accord, Civic, CRX, and Civic del Sol.

Replace soft, compliant factory rubber bushings with the Prothane 8-401 Universal Sway Bar End Link Kit to significantly improve steering response and cornering performance. Standard OE bushings often deflect under load or perish due to environmental exposure, resulting in vague handling and excessive body roll. This kit uses high-durometer red polyurethane to create a more rigid, reliable connection between the sway bar and the chassis, allowing your suspension to react faster and more predictably.

• Engineered from high-performance red polyurethane for superior durability and stiffness
• Enhances suspension geometry and reduces body roll during aggressive cornering
• Naturally resistant to automotive fluids, road salt, and ozone degradation
• Includes all necessary bushings and hardware for a complete installation
• Manufacturer Part Number: 8-401

Fits select 1992-2001 Acura Integra, Honda Civic, and Honda Civic del Sol.

Improve your vehicle's handling and steering response by replacing soft, original equipment rubber bushings with Prothane high-performance polyurethane. These 21mm front sway bar bushings are engineered to minimize bar deflection and maintain proper suspension geometry under heavy cornering loads. Unlike rubber, these polyurethane components are resistant to road oils, salt, and atmospheric ozone, ensuring long-term durability and consistent performance.

• Manufacturer Part Number: 8-1101
• Bore Diameter: 21mm
• Material: High-Durometer Polyurethane
• Color: Red
• Placement: Front Sway Bar
• Includes: Pair of bushings

Replace soft, compressed rubber components with Prothane Red Universal Sway Bar Bushings to restore handling precision and reduce body roll. These 20mm bushings are designed for use with A-style brackets, providing a firm pivot point that resists deflection under heavy cornering loads. By maintaining the alignment of the stabilizer bar, these bushings improve steering response and suspension predictability.

Constructed from Prothane's high-performance polyurethane, these bushings are engineered to withstand road salt, grease, and ozone—contaminants that typically cause factory rubber to rot and fail. This universal kit is an essential upgrade for custom suspension setups or for refreshing worn components on vehicles utilizing a 20mm bar and A-style mounting hardware.

• Manufacturer Part Number: 19-1119
• Inside Diameter: 20mm
• Bracket Type: A Bracket
• Material: High-durometer polyurethane
• Color: Red
• Resistant to oil, grease, and environmental degradation

Fits select 1987-2006 Mitsubishi Galant and Nissan Maxima, NX, Pulsar NX, and Sentra models.

Eliminate the knocking sounds and suspension play caused by worn factory components with the Whiteline Plus W23188 Rear Sway Bar Link Assembly. Designed to replace over-compliant, bent, or snapped OE units, these high-strength links increase rigidity and steering responsiveness during lane changes and initial turn-in. Each assembly is engineered using heavy-duty steel ball joint ends and Whiteline’s signature synthetic elastomer bushings for maximum service life.

• High-quality steel center body and ball joint ends provide superior strength over factory units
• Advanced synthetic elastomer bushings resist oil, grease, ozone, and weathering
• Protective plating on all metal components provides a hard, corrosion-resistant finish
• Eliminates flex to improve overall chassis performance and responsiveness
• Direct replacement for worn or damaged original equipment links
• Manufacturer Part Number: W23188
• Note: Special order item; no cancellations.

Fits select 1960-1997 Chevrolet, Ford, Mazda, Toyota, Lexus, and Daihatsu models with a 24mm sway bar. These bushings are designed to be used with W21301 or KBR10 universal saddles.

Whiteline front sway bar mount bushings are engineered to replace worn-out, compliant rubber bushings with high-performance synthetic elastomer. Unlike standard rubber, which deflects under heavy cornering loads, these bushings maintain the alignment and effectiveness of your sway bar for sharper steering response and flatter handling. The material is formulated for extreme resistance to oil, grease, ozone, and weathering, ensuring long-term durability in harsh undercar environments.

Installation is straightforward, providing a more positive link between the vehicle chassis and the suspension system. To ensure quiet operation and reduced maintenance, each bushing features a knurled internal diameter and integrated grease reservoirs designed to retain lubricant and provide continuous self-lubrication.

• Material: High-quality synthetic elastomer formulation
• Inside Diameter: 24mm
• Grease Retention: Knurled ID with internal grease reservoirs
• Resistance: Resistant to oil, grease, ozone, and weathering
• Manufacturer Part Number: W21999-24
• Warranty: Limited Lifetime Warranty

Fits select 2008-2025 Subaru (Impreza, WRX, Forester, BRZ, Legacy, XV Crosstrek), Toyota (86, GR86), and Scion (FR-S).

The SuperPro SPF3915K Rear Heavy Duty High Articulation End Link Set is engineered to eliminate the common failure points and geometry limitations of factory sway bar links. Designed specifically for vehicles with modified ride heights or those requiring increased suspension travel, these high-articulation links ensure your sway bar remains in its optimal operating window, preventing binding and improving cornering response.

Each link features SuperPro's proprietary engineering-grade polyurethane bushings. Unlike standard rubber that deflects under load and degrades over time, these bushings maintain precise alignment and offer a significant increase in service life without the harshness often associated with inferior polyurethane. This kit provides a more direct connection between the suspension and the sway bar, resulting in flatter cornering and more predictable handling.

• High-articulation design maintains correct sway bar geometry on lowered or long-travel setups
• Heavy-duty construction resists bending and fatigue under aggressive driving conditions
• Proprietary polyurethane bushings are resistant to oils, coolants, and extreme temperatures
• Designed, engineered, and manufactured in Australia
• Direct replacement for OE rear end links
• Manufacturer Part Number: SPF3915K

Fits 1965-1982 Chevrolet Corvette including Stingray, Collector's Edition, and Indianapolis 500 Pace Car models.

Restore suspension precision and sharpen handling with Whiteline sway bar link bushings. While small, these bushings play a critical role in the effectiveness of your anti-roll system. Over time, original rubber bushings perish and soften, leading to increased body roll and vague steering response. Whiteline's high-performance synthetic elastomer formulation is engineered to maintain its shape under heavy cornering loads, ensuring your sway bar engages immediately.

• Direct replacement for worn or deteriorated factory link bushings
• Provides a more positive connection for improved vehicle handling behavior
• Includes extreme pressure molybdenum disulphide (LM) based grease for quiet operation and extended life
• Resistant to oils, road salt, and environmental debris
• Manufacturer Part Number: W23837

Fits select 2000-2009 Subaru Legacy, Outback, Impreza, WRX, STI, Baja, and 2005-2006 Saab 9-2X models.

Replace worn factory rubber with Whiteline rear sway bar mount bushings to improve chassis response and handling consistency. These bushings utilize Whiteline's advanced synthetic elastomer formulation, specifically engineered to resist oil, grease, ozone, and harsh weathering while maintaining its physical properties over time.

A standout feature of this kit is the PTFE inner lining, which provides an exceptionally low coefficient of friction. This design eliminates the need for external lubrication during installation, providing a "grease-free" solution that remains silent and smooth. Internal grease reservoirs are integrated into the design to provide continual self-lubrication for maximum friction management throughout the life of the part.

• Part Number: W0406-20
• Material: Proprietary synthetic elastomer
• Lining: PTFE low-friction inner lining
• Installation: Grease-free design with internal reservoirs
• Durability: Resistant to ozone, oil, and grease
• Includes: Bushing set and detailed installation guide