Designed for high-horsepower builds requiring massive fuel volume, the Snow Performance Xtreme Version Fuel Hat provides a robust solution for your 1999-2002 Chevrolet Camaro F-Body fueling system. This triple pump fuel hat replaces the restrictive factory assembly, allowing for the integration of three high-flow fuel pumps to support extreme power levels in forced induction or high-output naturally aspirated applications.

Constructed for durability and precise fitment, this fuel hat is engineered to drop into the factory fuel tank mounting location. It features high-capacity ports to accommodate upgraded delivery and return lines, ensuring consistent pressure and volume under heavy load.

• Fits 1999-2002 Chevrolet Camaro (F-Body)
• Xtreme Version designed specifically for triple pump configurations
• Replaces restrictive OE fuel hat/sending unit housing
• Machined for a precise, leak-free seal with factory fuel tanks
• Essential for high-flow fuel system upgrades

Fits 1999-2002 Chevrolet Camaro F-Body models.

This Snow Performance High Output Version Fuel Hat is designed to solve fuel delivery bottlenecks in high-horsepower 1999-2002 F-Body builds. By providing a dedicated platform for a triple pump configuration, this assembly allows for significantly higher volume fuel delivery than the stock unit, making it an essential upgrade for forced induction or high-displacement engine builds requiring precise fuel pressure and flow.

• Specifically engineered for the 1999-2002 Chevrolet Camaro F-Body fuel tank architecture.
• Triple pump design supports extreme fuel demands for high-performance applications.
• High Output Version ensures robust construction and reliable plumbing for multi-pump setups.
• Provides a clean, integrated solution for upgrading the factory fuel pump housing.

Maximize the cooling and octane-enhancing potential of your water-methanol injection system with Snow Performance Boost Juice. This proprietary fluid is a precision-blended mix of 49% methanol and 51% distilled water, specifically formulated to provide a consistent increase in effective octane and a significant reduction in intake air temperatures. By using a pre-mixed solution, you eliminate the risk of inconsistent ratios or mineral buildup from non-distilled water sources that can degrade pump seals and clog injection nozzles over time.

Manufactured in the U.S.A. within a controlled environment, Boost Juice ensures that the ratio is exact in every bottle, allowing for precise engine tuning and predictable performance gains. This case provides a bulk supply of four one-gallon containers, ideal for high-consumption applications and ensuring you always have fluid ready for the street or track.

• Proprietary blend: 49% methanol / 51% distilled water
• Optimized for maximum cooling and octane boost
• Manufactured in the USA for strict quality and ratio control
• Safe for all Snow Performance and standard water-methanol injection kits
• Quantity: Case of 4 Gallons

Fits 1999-2002 Chevrolet Camaro F-Body models.

This Snow Performance Standard Version Fuel Hat provides a robust mounting solution for dual fuel pumps, essential for supporting the increased fuel demands of high-performance engines and forced induction setups. Designed to replace the factory unit, this fuel hat allows for a clean, efficient multi-pump installation without the clearance issues or fuel starvation risks common in modified stock housings.

• Engineered specifically for 1999-2002 Chevrolet Camaro (F-Body) chassis
• Dual pump configuration for high-volume fuel delivery
• Standard Version design for straightforward integration
• Replaces the factory fuel tank hat assembly
• Ideal for high-horsepower EFI builds requiring consistent fuel pressure and flow

Fits 1999-2002 Chevrolet Camaro F-Body models.

The Snow Performance High Output Triple Pump Fuel Hat is a robust fueling solution engineered for high-horsepower F-Body builds. This assembly replaces the restrictive factory fuel bucket, allowing for significantly increased fuel volume to support forced induction or high-output naturally aspirated engines that have outgrown the stock delivery system.

This High Output version features a triple pump configuration designed to drop into the factory fuel tank. It includes three 285 LPH pumps, providing the necessary overhead for demanding EFI applications while maintaining reliable fuel pressure under load.

• High Output Triple Pump configuration for maximum fuel volume
• Includes three 285 LPH fuel pumps (3-285)
• Direct fitment for 1999-2002 Chevrolet Camaro F-Body fuel tanks
• Essential upgrade for high-horsepower forced induction or racing setups
• Manufacturer Part Number: 3-285

The Snow Performance SNO-81081 30 PSI Hobbs Switch provides critical system control for high-performance water-methanol injection setups. Specifically engineered for diesel pulling and racing applications running high boost, this pressure-sensitive safety switch protects the engine by managing system engagement based on manifold pressure.

This adjustable switch is designed to automatically shut off water-methanol flow if boost pressure drops below the set point, preventing injection during suboptimal conditions. While it typically engages the system at 35 PSI in standard configurations, the unit is fully user-adjustable to meet specific tuning requirements.

• Manufacturer Part Number: SNO-81081
• Adjustable Range: 25-50 PSI
• Factory Preset: 30 PSI
• Application: Recommended for high-boost diesel racing and pulling
• Functionality: Integrated safety shut-off based on boost pressure set point

The Snow Performance SNO-40016-BRD is a high-capacity 7-gallon water-methanol tank upgrade engineered for diesel truck owners who need extended range without sacrificing bed floor space. This tank is custom-molded to fit the specific void between the truck bed floor, top of the bed rail, and the wheel well, ensuring a clean installation that stays out of the way of cargo.

Equipped with a heavy-duty braided stainless steel line and 4AN fittings, this kit provides superior burst protection and leak-free reliability compared to standard nylon tubing. The included high-flow solenoid prevents gravity siphoning, while the custom mounting straps and hardware ensure a secure fit under heavy vibration or off-road conditions.

• 7-gallon capacity designed for 800+ miles of range while towing
• Custom-molded shape fits diesel truck bed side-walls
• Braided stainless steel main line for maximum durability
• High-flow solenoid prevents siphoning under vacuum
• Includes 4AN fittings, screen fitting, and custom mounting straps
• Manufacturer Part Number: SNO-40016-BRD

Fits 2014-2019 Chevrolet Corvette Stingray, Z06, Grand Sport, and ZR1 models. This Snow Performance Multi-Pump Fuel Hat (SNF-52150) provides a robust, high-output fueling solution by replacing the factory fuel hat and bucket with a precision-engineered billet assembly.

Constructed in the USA from CNC-machined 6061 billet aluminum, this manifold features internal passages that eliminate the need for unreliable T-fittings, rubber lines, and hose clamps that often fail in multi-pump configurations. The assembly is finished in black anodizing for superior corrosion resistance and full compatibility with gasoline, E85, and E100 ethanol blends. It is designed specifically for return-style fuel systems and retains critical factory features including the EVAP system, filler neck, and saddle-tank fuel transfer functionality.

• Configuration: Dual (2) pump manifold
• Material: Black anodized 6061 billet aluminum
• Ports: 10AN ORB female feed and 8AN ORB female return
• Seals: Chemical-resistant Viton O-rings for a leak-free fit
• Included: Wiring harnesses for pumps and fuel level sending unit
• Required: Requires return-style installation and external fittings (sold separately)
• Note: Reuses factory fuel level sending unit (not included)

Fits select 2011-2025 Ford Mustang models, including GT, Shelby GT500, Shelby GT350, EcoBoost, and Mach 1. This Snow Performance Xtreme fuel hat provides a high-output fueling solution for forced induction or high-horsepower builds requiring a return-style fuel system.

Constructed from 6061 billet aluminum and finished in a black anodized coating, this fuel hat is fully compatible with pump gasoline, E85, and E98 ethanol blends. Unlike multi-pump setups that rely on prone-to-failure rubber hoses and T-fittings, the SNF-52601X features CNC-machined internal passages and Viton chemical-resistant O-rings for a secure, leak-free installation. This assembly replaces the factory fuel bucket while retaining the use of the OE fuel level sending unit, EVAP system, and fuel transfer functionality for saddle-style tanks.

• Manufacturer Part Number: SNF-52601X
• Configuration: 3-Pump setup (includes genuine TI Automotive/Walbro pumps)
• Material: CNC-machined 6061 billet aluminum with black anodized finish
• Ports: 10AN ORB feed port and 8AN ORB return port
• Compatibility: Designed for return-style fuel systems only; not for use in returnless applications
• Retains factory features: Fuel level sending unit mount, EVAP, filler neck, and transfer pump
• Includes: Wiring harness for pumps and level sender; does not include fittings or fuel level sending unit

Fits 1999-2004 Ford Mustang models, including Base, GT, Bullitt, Mach 1, and SVT Cobra (V6/V8).

The Snow Performance SNF-52599 Multi-Pump Fuel Hat is a high-output solution designed to eliminate the reliability issues common with multi-pump upgrades that rely on T-fittings and rubber hoses. Engineered and CNC-machined in the USA from 6061 billet aluminum, this fuel hat features internal manifold passages that replace prone-to-deteriorate plastic lines and hose clamps. The assembly is finished in black anodizing for superior corrosion resistance, making it fully compatible with E85, 100% ethanol, and gasoline blends.

This dual-pump hat is designed for return-style fuel systems only and maintains factory tank functionality, including the EVAP system, filler neck, and fuel level sending unit mounting. It features large 10AN ORB feed and 8AN ORB return ports to support high-horsepower demands while utilizing Viton chemical-resistant O-rings for a leak-free seal.

• CNC-machined 6061 billet aluminum construction
• Black anodized finish for E85 and harsh fuel compatibility
• Female 10AN ORB feed port and 8AN ORB return port
• Retains factory EVAP, filler neck, and fuel transfer pump functionality
• Includes wiring harnesses for pumps and fuel level sending unit
• Compatible with genuine TI Automotive (Walbro) 450LPH or 470LPH pumps
• Designed for return-style fuel systems only
• Manufacturer Part Number: SNF-52599

Note: Does not include fuel level sending unit or AN fittings. 90-degree swivel adapter fittings are required to adapt to your fuel lines.

Fits 2003-2004 Ford Mustang SVT Cobra and 10th Anniversary models.

The Snow Performance Xtreme Series Multi-Pump Fuel Hat replaces the restrictive factory fuel bucket with a high-flow, billet aluminum manifold designed for high-horsepower builds. Engineered, CNC-machined, and assembled in the USA from 6061 billet aluminum, this fuel hat features internal passages that eliminate the need for unreliable T-fittings, rubber hoses, or plastic lines that often fail or deteriorate over time. The assembly is finished in black anodizing for superior corrosion resistance, ensuring full compatibility with E85, ethanol blends, and pump gasoline.

This fuel hat is designed for return-style fuel systems only and features oversized female 10AN ORB feed and 8AN ORB return ports for maximum volume. The CNC-machined body secures up to three genuine TI Automotive (Walbro) fuel pumps (sold separately) using Viton chemical-resistant O-rings for a leak-free seal. This unit retains essential factory tank functions, including the OE fuel level sending unit mounting, EVAP system, and filler neck.

• Manufacturer Part Number: SNF-52600X
• Construction: CNC-machined 6061 billet aluminum
• Finish: Black anodized for E85/ethanol compatibility
• Ports: 10AN ORB feed and 8AN ORB return
• Installation: Direct replacement for factory fuel hat/bucket
• Compatibility: Return-style systems only; accommodates 2 or 3 pumps
• Includes: Wiring harnesses for pumps and fuel level sending unit
• Note: Does NOT include fuel level sending unit or fittings

Fits 2003-2004 Ford Mustang SVT Cobra and 10th Anniversary models.

The Snow Performance Race Series Multi-Pump Fuel Hat (SNF-52600R) provides a high-output fuel delivery solution for the 03-04 Mustang Cobra. This billet 6061 aluminum manifold replaces the factory fuel bucket, eliminating the need for unreliable T-fittings, rubber hoses, and hose clamps that are prone to deterioration and leaks. CNC-machined for precision, this assembly features Viton chemical-resistant O-rings and a black anodized finish for maximum corrosion resistance and full compatibility with E85, ethanol blends, and gasoline.

Designed specifically for return-style fuel systems, this hat retains critical factory functionality, including the OE fuel level sending unit, EVAP system, filler neck, and the fuel transfer pump for saddle-style tanks. The manifold features female 10AN ORB feed and 8AN ORB return ports for high-flow capacity.

• CNC-machined from 6061 billet aluminum with a black anodized finish
• Eliminates internal hose clamps and plastic lines for improved reliability
• Retains factory EVAP, filler neck, and fuel transfer functionality
• Configurable for 2 or 3 TI Automotive (Walbro) 450LPH/470LPH pumps
• Ports: 10AN ORB (Feed) / 8AN ORB (Return)
• Includes wiring harnesses for pumps and fuel level sending unit
• Engineered and built in the USA

Note: Designed for return-style applications only. Does not include fuel level sending unit or fittings. Requires genuine TI Automotive fuel pumps (sold separately).

Fits 2003-2004 Ford Mustang SVT Cobra and 10th Anniversary models.

The Snow Performance SNF-52600H Multi-Pump Fuel Hat is a precision-engineered solution for high-horsepower 03-04 Cobra applications requiring significant fuel volume. Unlike multi-pump upgrades that rely on unreliable T-fittings and hose clamps, this assembly features a CNC-machined 6061 billet aluminum manifold with internal flow passages. This design eliminates the risk of deteriorating rubber or plastic lines inside the tank, ensuring a secure, leak-free fuel delivery system.

The assembly is finished in black anodizing for maximum corrosion resistance, making it fully compatible with E85, 100% Ethanol, and standard pump gasoline. It is designed specifically for return-style fuel systems and replaces the factory fuel bucket while retaining essential OE features, including the EVAP system, filler neck, and fuel level sending unit mounting points.

• CNC machined from 6061 billet aluminum with a black anodized finish
• Compatible with E85, E98, and pump gasoline
• 10AN ORB feed port and 8AN ORB return port
• Viton chemical-resistant O-rings for superior sealing
• Supports genuine TI Automotive (Walbro) 450LPH or 470LPH pumps
• Includes wiring harnesses for pumps and fuel level sending unit
• Retains factory EVAP and fuel transfer pump functionality
• Manufacturer Part Number: SNF-52600H

Note: Designed for return-style fuel systems only. Not for use in returnless applications. Does not include fuel level sending unit or AN fittings.

Fits 2003-2004 Ford Mustang SVT Cobra and 10th Anniversary models.

The Snow Performance SNF-52600 Dual Pump Fuel Hat provides a high-output, reliable fuel delivery solution for Terminator Cobras. This assembly replaces the factory fuel hat and bucket with a precision CNC-machined 6061 billet aluminum manifold, eliminating the need for unreliable T-fittings, rubber hoses, and hose clamps that often fail in multi-pump configurations. The design features internal CNC-machined passages to ensure maximum flow and a leak-free fit with Viton chemical-resistant O-rings.

• Durable Construction: CNC-machined from 6061 billet aluminum and finished in black anodizing for superior corrosion resistance and compatibility with E85 and ethanol-blended fuels.
• High-Flow Specifications: Equipped with female 10AN ORB feed and 8AN ORB return ports for efficient fuel transfer in high-horsepower applications.
• Factory Integration: Designed to retain essential OE components, including the fuel level sending unit, EVAP system, filler neck, and fuel transfer pump functionality.
• Premium Pumps: Configured for dual TI Automotive (Walbro) fuel pumps. These are intended for return-style fuel systems only and are compatible with 100% gasoline through E98 ethanol.

Specifications:
• MPN: SNF-52600
• Material: 6061 Billet Aluminum
• Ports: 10AN ORB (Feed), 8AN ORB (Return)
• Compatibility: Return-style fuel systems only

Note: Fuel level sending unit and fittings are sold separately. Includes wiring harnesses for pumps and sending unit.

Fits 1999-2004 Ford Mustang Base, GT, GT Bullitt, and Mach 1.

The Snow Performance Xtreme Multi-Pump Fuel Hat (SNF-52599X) is a high-output fueling solution designed to replace restrictive factory fuel buckets and eliminate the need for unreliable hose clamps and T-fittings in multi-pump setups. Precision CNC-machined in the USA from 6061 billet aluminum and finished in black anodize for superior corrosion resistance, this manifold is fully compatible with E85, ethanol blends, and pump gasoline.

Engineered for return-style fuel systems, the Xtreme fuel hat supports configurations of 2 or 3 genuine TI Automotive (Walbro) fuel pumps (450LPH or 470LPH). It features internal CNC-machined passages and Viton chemical-resistant O-rings for a secure, leak-free seal. This assembly integrates with your Mustang's factory tank components, retaining the EVAP system, filler neck, and fuel transfer functionality for saddle-style tanks.

• Material: 6061 Billet Aluminum with Black Anodized Finish
• Port Sizes: 10AN ORB Feed / 8AN ORB Return
• Fuel Compatibility: 100% Gasoline, E10, E85, E98
• System Type: Return-style only (not for returnless applications)
• Pump Compatibility: Supports up to 3 genuine TI Automotive (Walbro) pumps
• Retains: OE fuel level sending unit and EVAP system functionality
• Manufacturer Part Number: SNF-52599X

Note: This assembly does not include fittings or the fuel level sending unit. Wiring harnesses for the pumps and fuel level sending unit are included.

Fits 1999-2004 Ford Mustang Base, GT, Bullitt, and Mach 1 models.

The Snow Performance Triple Pump Race Fuel Hat is a high-output fuel delivery solution engineered for serious performance applications. This assembly completely replaces the factory fuel bucket with a precision CNC-machined 6061 billet aluminum manifold, eliminating the need for unreliable T-fittings, rubber hoses, and plastic lines that deteriorate over time. The integrated manifold design ensures secure pump mounting and a leak-free fit using chemical-resistant Viton O-rings.

Designed for durability and corrosion resistance, this hat features a black anodized finish, making it fully compatible with E85, E98, and other ethanol-based fuels. While upgrading your flow capacity, this unit retains essential factory tank features including the EVAP system, filler neck, and saddle-style tank fuel transfer pump functionality. Note: This assembly is designed for return-style fuel systems only and does not support returnless applications.

• Manufacturer Part Number: SNF-52599R
• Material: CNC-machined 6061 billet aluminum with black anodized finish
• Ports: 10AN ORB feed and 8AN ORB return ports
• Pump Type: Genuine TI Automotive (Walbro) fuel pumps
• Compatibility: 100% Gasoline, 100% Ethanol, and all blends (E10, E85, E98)
• Includes: Wiring harnesses for pumps and fuel level sending unit
• Requirement: Return-style fuel system installation only
• Note: Does NOT include fuel level sending unit or fittings

Fits 1999-2004 Ford Mustang Base, GT, GT Bullitt, and Mach 1 models.

The Snow Performance SNF-52599H Multi-Pump Fuel Hat provides a high-output fueling solution for high-horsepower Mustang builds. This unit completely replaces the factory fuel bucket with a CNC-machined 6061 billet aluminum manifold, engineered to accommodate up to three fuel pumps. Unlike traditional multi-pump setups that rely on prone-to-failure T-fittings and rubber hoses, this assembly features internal CNC-machined passages that eliminate the need for hose clamps and internal plastic lines that can deteriorate over time.

Built in the USA, this fuel hat is finished in black anodizing for superior corrosion resistance and full compatibility with E85, E98, and 100% ethanol. The design retains critical factory tank features, including the OE fuel level sending unit, EVAP system, and filler neck functionality. For Mustangs equipped with saddle-style tanks, this assembly also maintains the factory fuel transfer pump operation. The hat features a 10AN ORB feed port and an 8AN ORB return port, specifically designed for return-style fuel system conversions.

• Manufacturer Part Number: SNF-52599H
• Material: 6061 Billet Aluminum with Viton O-rings
• Finish: Black Anodized (E85/Ethanol compatible)
• Ports: 10AN ORB (Feed) / 8AN ORB (Return)
• Compatibility: Designed for genuine TI Automotive (Walbro) 450LPH or 470LPH pumps
• System Type: Return-style only (not for returnless applications)
• Included: Wiring harnesses for fuel pumps and fuel level sending unit
• Note: Does NOT include fuel level sending unit or fuel line fittings

Fits select 2005-2023 Chrysler 300 and Dodge Charger models. This Snow Performance Multi-Pump Fuel Hat provides a high-output fuel solution that eliminates the reliability issues of multi-pump setups using T-fittings and rubber hoses. Engineered as a direct replacement for the factory fuel bucket, this billet manifold features precision CNC-machined internal passages to deliver high-volume fuel flow without the risk of deteriorating lines or loose hose clamps.

• Precision Construction: CNC-machined in the USA from 6061 billet aluminum with a black anodized finish for maximum corrosion resistance and compatibility with Gasoline, E85, and E98.
• Leak-Free Design: Features Viton chemical-resistant O-rings and internal manifolds that hold pumps securely, ensuring a perfect seal under high pressure.
• System Retention: Designed to maintain factory tank features including the OE fuel level sending unit, EVAP system, filler neck, and saddle-tank fuel transfer pump functionality.
• Port Specifications: Equipped with female 10AN ORB feed and 8AN ORB return ports (90-degree swivel adapter fittings sold separately).
• Pump Compatibility: Configured for dual TI Automotive (Walbro) 450LPH or 470LPH pumps. Designed for return-style fuel systems only.

Note: Fuel level sending unit and fittings are not included. Includes required wiring harnesses for pumps and sending unit. Manufacturer Part Number: SNF-52410.

Enhance your engine's cooling and octane performance with the Snow Performance SNO-N3500 Water Methanol Injection Nozzle. Engineered for precise delivery, this 35 GPH nozzle utilizes a high-pressure atomization process to create a fine mist, ensuring complete evaporation as it enters the intake air stream.

By injecting a water-methanol mixture, this component helps drastically reduce Exhaust Gas Temperatures (EGTs) and suppresses engine detonation (knock), allowing for more aggressive timing or higher boost levels in forced induction applications. Its precision-machined construction ensures consistent flow rates and a reliable spray pattern under high-pressure conditions.

• Flow Rate: 35 GPH (Gallons Per Hour)
• Function: High-atomization water-methanol injection
• Construction: Precision-machined for durability and consistency
• Manufacturer Part Number: SNO-N3500
• Optimizes cooling and suppresses detonation for improved performance

The Snow Performance SNO-N3000 is a high-capacity water-methanol injection nozzle designed to deliver precise fluid atomization for high-output cooling. Engineered to suppress detonation and lower intake air temperatures (IATs), this nozzle ensures the water-methanol mixture is converted into a fine mist for rapid evaporation within the intake tract.

• Part Type: Water-Methanol Injection Nozzle
• Flow Rate: 30 GPH (Gallons Per Hour)
• Manufacturer Part Number: SNO-N3000
• Function: Precision atomization for maximum cooling and octane enhancement
• Compatibility: Replaces or adds to any standard Snow Performance injection system

The Snow Performance SNO-N2500 is a high-flow water-methanol injection nozzle designed to provide precise fluid atomization for high-horsepower forced induction applications. Rated at 25 GPH (Gallons Per Hour), this nozzle is engineered to withstand the pressures of high-output pumps while ensuring a consistent, fine mist for effective intake charge cooling and octane enhancement.

Constructed for durability and precision, this nozzle helps prevent pre-detonation (knock) and allows for more aggressive ignition timing by significantly reducing intake air temperatures. It serves as a critical component for any performance water-meth system, ensuring even distribution within the intake tract.

• Manufacturer Part Number: SNO-N2500
• Flow Rate: 25 GPH (Gallons Per Hour)
• Compatibility: Standard Water-Methanol Injection Systems
• Construction: Precision-machined for optimal spray pattern and atomization
• Function: Replaces worn nozzles or scales up system flow capacity

The Snow Performance Water Methanol Injection Nozzle (SNO-N2000) is engineered to provide precise fluid atomization for high-output cooling and octane enhancement. Rated at 20 GPH, this nozzle is a critical component for high-horsepower forced induction or high-compression engines, ensuring the water-methanol mixture is finely misted into the intake stream to effectively lower intake air temperatures and suppress detonation.

• Manufacturer Part Number: SNO-N2000
• Flow Rate: 20 GPH (Gallons Per Hour)
• Optimized spray pattern for superior fluid atomization
• Designed for use with Snow Performance water-methanol injection systems

The Snow Performance SNO-N1800 Water Methanol Injection Nozzle is engineered to provide precise fluid delivery for forced induction or high-compression naturally aspirated engines. Rated at 18 GPH, this nozzle is a critical component for achieving superior atomization, which is essential for effective intake air temperature (IAT) reduction and knock suppression.

Designed with a proprietary internal geometry, this nozzle creates a fine, uniform mist to ensure even distribution within the intake tract. This maximizes the cooling effect and effective octane boost provided by your water-methanol mixture. Whether you are replacing a worn nozzle or scaling your system for higher power levels, the SNO-N1800 delivers consistent performance under high pressure.

• Manufacturer Part Number: SNO-N1800
• Flow Rate: 18 GPH (Gallons Per Hour)
• Purpose-built for water-methanol injection systems
• Optimized spray pattern for maximum heat absorption

Ensure maximum atomization and intake cooling with this precision-machined 16 GPH nozzle from Snow Performance. Designed for high-output water-methanol injection systems, this nozzle is engineered to break down fluid into a fine, consistent mist, preventing intake puddling and ensuring even distribution across the cylinders.

Built to withstand the high pressures of performance WMI pumps and the corrosive nature of methanol, the SNO-N1600 nozzle is a critical component for maintaining safe combustion temperatures and increasing effective octane in forced induction or high-load applications. This component replaces worn or clogged nozzles to restore system efficiency and spray pattern integrity.

• Flow Rate: 16 GPH (Gallons Per Hour)
• Precision-machined design for superior fluid atomization
• Compatible with all Snow Performance water-methanol injection kits
• Robust construction for long-term durability and chemical resistance
• Manufacturer Part Number: SNO-N1600

Ensure consistent cooling and octane enhancement with the Snow Performance 14 GPH water-methanol injection nozzle. This precision-machined component is engineered to provide superior fluid atomization, which is critical for reducing intake air temperatures and preventing detonation in high-performance forced induction applications.

Designed as a direct replacement or expansion for existing Snow Performance systems, the SNO-N1400 nozzle delivers a reliable 14 GPH flow rate. Its robust construction resists clogging and maintains a stable spray pattern under high pressure, ensuring your engine receives the precise volume of methanol-water mix required for peak efficiency.

• Flow Rate: 14 GPH (Gallons Per Hour)
• Manufacturer Part Number: SNO-N1400
• Precision-machined for optimized spray atomization
• Compatible with standard Snow Performance nozzle holders
• Essential for high-horsepower cooling and knock suppression

The Snow Performance SNO-N1200 is a precision-engineered water-methanol injection nozzle designed to provide maximum atomization for performance-oriented cooling. Rated at a flow of 12 GPH, this nozzle is built to withstand the pressures of high-output WMI systems while ensuring a consistent, fine mist is delivered into the intake air stream to reduce intake air temperatures (IATs) and suppress detonation.

• Flow Rate: 12 GPH (Gallons Per Hour)
• Engineered for superior atomization to improve octane boost and cooling efficiency
• Precision machined for a consistent and repeatable spray pattern
• Compatible with all Snow Performance water-methanol injection kits and most 1/8-NPT nozzle holders
• Manufacturer Part Number: SNO-N1200

The Snow Performance SNO-N1000 is a precision-engineered water-methanol injection nozzle designed to deliver a metered flow of 10 GPH (Gallons Per Hour). This component is essential for achieving proper fluid atomization, ensuring the water-methanol mist is fine enough to flash-evaporate, effectively reducing intake air temperatures and suppressing detonation.

Constructed for durability and consistent performance under high pressure, this nozzle helps prevent fluid pooling and ensures even distribution within the intake tract. It serves as a direct replacement or an incremental upgrade for Snow Performance injection systems requiring specific flow scaling to match engine displacement and boost levels.

• Flow Rate: 10 GPH (Gallons Per Hour)
• Optimized for superior fluid atomization and intake cooling
• Precision-machined for a consistent spray pattern
• Replaces or upgrades existing water-meth nozzles
• Manufacturer Part Number: SNO-N1000

The Snow Performance SNO-N0900 is a precision-engineered water-methanol injection nozzle designed to deliver a consistent, finely atomized mist into the intake tract. Rated at a flow rate of 9 GPH (gallons per hour), this nozzle is a critical component for heat management and detonation control in high-performance forced induction or high-compression applications.

Constructed for durability and consistent spray patterns under high pressure, this nozzle helps reduce intake air temperatures (IATs) and increases effective fuel octane. It is designed for seamless integration with Snow Performance water-methanol systems and serves as an ideal replacement or upgrade for tuned engines requiring specific fluid volume delivery.

• Manufacturer Part Number: SNO-N0900
• Flow Rate: 9 GPH
• Function: High-pressure fluid atomization
• Application: Water-methanol injection systems
• Construction: Precision-machined for consistent spray patterns

Ensure optimal atomization and cooling in your forced induction or high-compression engine with the Snow Performance 8 GPH Water-Methanol Injection Nozzle. This precision-machined component is engineered to deliver a fine mist of water-methanol mixture into the intake stream, effectively reducing intake air temperatures (IATs) and suppressing detonation for increased power and engine safety.

Designed for use with all Snow Performance water-methanol injection systems, this nozzle is a critical component for maintaining consistent performance. The 8 GPH flow rate is typically utilized in mid-to-high horsepower applications where significant cooling and octane enhancement are required. This part serves as either a direct replacement for a worn nozzle or as part of a multi-nozzle configuration.

• Flow Rate: 8 GPH (Gallons Per Hour)
• Manufacturer Part Number: SNO-N0800
• Function: High-pressure fluid atomization for intake cooling
• Build Quality: Precision-machined for consistent spray patterns and durability

The Snow Performance SNO-N0700 Water-Methanol Injection Nozzle is engineered to provide precise fluid atomization for forced induction and high-compression engines. Rated at 7 GPH (Gallons Per Hour), this nozzle is a critical component for cooling intake charge temperatures and increasing effective octane levels when under load.

Constructed for durability and consistent spray patterns, it ensures a uniform mist that mixes thoroughly with the air stream. Whether you are replacing a worn nozzle or fine-tuning your system for specific power levels, this 7 GPH unit offers the reliability required for high-performance applications.

• Flow Rate: 7 GPH
• Precision-machined for fine fluid atomization
• Compatible with Snow Performance water-methanol injection kits
• Manufacturer Part Number: SNO-N0700