Finish your exterior with a clean, high-performance aesthetic using the Ford Performance Slim License Plate Frame. This low-profile frame is designed for enthusiasts who want a stealthy appearance that doesn't obstruct registration stickers or plate details.

Constructed from premium 304 stainless steel, this frame is engineered to resist corrosion and withstand the elements. It features a durable black powder coat finish and a precision laser-etched Ford Performance logo that provides a permanent, high-contrast look that won't peel or fade over time. The slim design offers a modern, minimalist fit suitable for any vehicle.

• Material: Heavy-duty 304 stainless steel
• Finish: Durable black powder coat
• Logo: Laser-etched Ford Performance branding
• Profile: Slim design for maximum plate visibility
• Manufacturer Part Number: M-1828-SSB

Fits 2024-2026 Ford Mustang EcoBoost and GT models. This genuine Ford Racing Performance Pack front splitter is engineered to optimize the aerodynamics of the S650 chassis, increasing front-end downforce for better high-speed stability. Designed as a direct replacement or upgrade for the Performance Pack trim, it provides the aggressive, low-profile aesthetic essential for any performance-oriented build.

• Fits 2024-2026 Mustang EcoBoost and GT models
• Genuine Ford Performance component ensures precise OE-grade fit and finish
• Enhances front-end aerodynamics and downforce for improved stability
• Constructed from durable materials to withstand track and street use
• Direct bolt-on installation to factory mounting points

Designed for high-performance naturally aspirated builds, the Ford Racing Gen 3 Coyote Aluminator short block provides a rugged foundation for your 5.0L engine. This short block is hand-assembled to exacting tolerances, utilizing a heavy-duty rotating assembly engineered to withstand high-RPM stress and increased cylinder pressures.

This assembly features a premium internal component set, including Manley connecting rods secured by ARP rod bolts and Mahle forged pistons. With a 12.0:1 compression ratio, this short block is optimized for maximum power extraction in N/A configurations while maintaining the structural integrity required for track or street-performance use.

• Manufacturer Part Number: M-6009-A50NAB
• Engine Compatibility: Gen 3 5.0L Coyote
• Compression Ratio: 12.0:1
• Pistons: Mahle forged pistons
• Connecting Rods: Manley with ARP rod bolts
• Assembly: Precision hand-assembled short block

Fits 2019-2023 Ford Ranger Lariat, XL, and XLT models.

Secure your drivetrain against trail hazards with the Ford Performance Silver Skid Plate Kit. Designed to provide heavy-duty undercarriage protection, this kit shields the transmission and transfer case from rock damage and debris. This setup utilizes the same engineering principles as the skid plates featured on the 2017 Ford Raptor Race truck, offering professional-grade durability for your Ranger.

Constructed from 3/16-inch thick aluminum, these plates deliver a high strength-to-weight ratio without the bulk of traditional steel armor. The design includes side and center reinforcements to better withstand direct impacts, while the silver powder-coated finish provides long-lasting corrosion resistance. This kit is engineered to bolt directly to the truck for a precise, factory-style fitment.

• Replaces or adds heavy-duty protection for the transmission and transfer case
• Constructed from 3/16" thick aluminum for lightweight durability
• Side and center reinforcements for increased structural integrity
• Durable silver powder-coated finish for corrosion protection
• Direct bolt-on installation with no drilling required
• Includes all necessary mounting brackets and hardware
• Manufacturer Part Number: M-5018-RA

Fits 1994-2014 Ford F-150 and 2004 Ford F-150 Heritage across various trims, including XL, XLT, Lariat, and SVT Raptor.

Engineered for high-stress applications, the Ford Racing High Performance Oil Filter provides superior filtration and structural integrity compared to standard service filters. The heavy-gauge steel base and canister are designed to withstand high-pressure spikes, providing excellent burst strength and resistance to impulse fatigue during hard driving or high-RPM conditions.

Inside, a specialized synthetic-polymer/cellulose-fiber blend filter media delivers up to 50% more filtering capacity than conventional filters. This results in improved efficiency and a longer service life, making it an ideal choice for engines running either conventional or synthetic motor oils. A high-quality silicone anti-drain back valve keeps oil in the filter when the engine is off to prevent dry starts, while the non-stick sealing gasket ensures a reliable seal and hassle-free removal during your next oil change.

• Manufacturer Part Number: CM-6731-FL820
• Synthetic-polymer/cellulose-fiber blend media for 50% more capacity
• Heavy-gauge base and canister for increased burst strength
• Silicone anti-drain back valve prevents dry starts
• Compatible with conventional and synthetic motor oils
• Non-stick gasket for easier installation and removal

Fits 2015-2025 Ford Mustang models equipped with integrated turn signals, including EcoBoost, GT, Dark Horse, and Shelby variants.

Upgrade your Mustang's exterior styling with these Ford Performance Carbon Fiber Mirror Skull Caps. These components are direct replacements for the OE mirror housings, ensuring a precise, factory-level fit rather than a simple adhesive cover. Each cap is manufactured using a rigorous autoclave process with pre-preg 3K, 2x2 twill carbon fiber cloth for maximum strength-to-weight ratio and a flawless weave pattern.

• Manufacturer Part Number: M-17740-MTG
• Direct replacement for factory mirror skull caps
• Constructed from pre-preg 3K, 2x2 twill carbon fiber
• Autoclave-cured for superior durability and finish
• High-gloss clear coat finish
• Includes one pair of mirror skull caps (driver and passenger side)

Note: These caps are designed exclusively for Mustangs equipped with factory-integrated mirror turn signals. For vehicles without turn signals, see part number M-1774-MG.

Fits select 2023-2025 Ford Expedition, F-150, F-250/F-350 Super Duty, and Lincoln Navigator models. This kit is specifically engineered for vehicles equipped with 433MHz tire pressure monitoring systems.

This Ford Racing TPMS kit is essential when installing new wheels or replacing faulty sensors to ensure your vehicle correctly monitors and reports tire pressure. Maintaining a functional TPMS is critical for optimal fuel economy, tire wear, and safety. The kit includes the 433MHz sensor and the required handheld activation tool, allowing you to sync the new hardware to your vehicle's computer without a trip to the dealership.

• Manufacturer Part Number: M-1180-433MHZ
• Frequency: 433MHz
• Included Hardware: TPMS sensor and handheld activation tool
• Installation: Mounts to factory or compatible aftermarket valve stem locations
• Compatibility: Designed for late-model Ford and Lincoln trucks and SUVs

Fits 2021-2025 Ford Bronco models, including Badlands, Raptor, Wildtrak, and Everglades.

Add authentic race-bred styling to your vehicle with the Ford Performance black emblem. This is the same emblem used by the Ford Performance team on factory-built race cars, offering a clean, stealthy aesthetic for your 2021-2025 Bronco. Designed for versatility and ease of installation, this emblem features a pre-applied high-strength adhesive backing for a secure bond.

• Genuine Ford Performance: Authentic component as used on factory-built competition vehicles.
• Durable Finish: Sleek black finish designed to withstand the elements and maintain its appearance.
• Simple Installation: Mounts easily using the attached two-sided tape; specifically noted for use on the passenger side dash or rear exterior.
• Manufacturer Part Number: M-1447-BRB

Fits select 2015-2025 Ford F-150, Expedition, Bronco Raptor, and Lincoln Navigator models.

Upgrade your factory hardware with this Ford Racing Black Chrome Lug Nut Kit. Designed specifically for late-model Ford trucks and SUVs, these M14 x 1.5 lug nuts provide a durable, premium appearance while maintaining OE-level security. The black chrome finish offers superior corrosion resistance and a sleek look for aftermarket or factory wheels. This is a complete vehicle kit containing 24 lug nuts to service all four corners on 6-lug applications.

• Manufacturer Part Number: M-1012K-F15B
• Thread Pitch: M14 x 1.5
• Finish: Black Chrome
• Quantity: Set of 24 Lug Nuts
• Direct replacement for factory Ford/Lincoln hardware

Fits 2024 Ford Mustang EcoBoost and EcoBoost Premium (2.3L).

Unlock the performance potential of your S650 with the Ford Performance Parts M-9603-M4D Calibration. This factory-engineered software upgrade is specifically developed and dyno-tested to increase power and sharpen throttle response while maintaining the reliability expected from an OE-backed component.

• Optimized engine calibration delivers a peak power output of 350 HP
• Engineered and dyno-tested by Ford Performance for proven results
• Maintains factory-level driveability and engine safety parameters
• Designed specifically for the 2.3L EcoBoost platform
• Manufacturer Part Number: M-9603-M4D

Fits 2015-2023 Ford Mustang EcoBoost and GT models.

The Ford Performance Street Handling Pack is an engineered suspension solution for drivers who want a lower stance and improved cornering capability without the uncompromising stiffness of a dedicated track setup. This kit replaces your factory suspension with components specifically tuned to work together, providing a more aggressive look and more responsive steering input.

A major advantage of the M-FR3A-MAA kit is the inclusion of pre-assembled struts. Because the springs are already mounted, you do not need a spring compressor for the front installation, making this a straightforward bolt-in upgrade. Every component is designed and tested to meet Ford Performance standards for fitment and durability.

• Lowers the vehicle approximately 1.0 inch for an aggressive stance
• Pre-assembled struts allow for a safe, easy bolt-in installation
• System-tuned components for balanced street handling performance
• Made in the USA
• Manufacturer Part Number: M-FR3A-MAA

Note: Mustangs originally equipped with the Performance Pack may require different spring options (M-5300-X) to achieve specific height changes. A professional four-wheel alignment is required after installation to ensure proper geometry and tire wear.

Fits 2016-2018 Ford Focus RS models.

Enhance your interior with this authentic Ford Racing carbon fiber shift knob. Designed specifically for the 6-speed manual transmission in the Focus RS, this spherical knob provides a premium tactile feel and a high-performance look that replaces the standard factory unit.

• Authentic carbon fiber construction with a durable high-gloss finish
• Features the signature bright RS logo on the shift pattern
• Designed for 6-speed manual shift patterns
• Direct-fit installation onto the factory shifter lever
• Manufacturer Part Number: M-7213-FRSCF

Fits select 2011-2019 Ford Mustang and F-150 (5.0L / 5.2L).

Upgrade your Coyote or Voodoo engine with this pair of Ford Racing aluminum cam covers. Designed to replace the factory plastic units, these heavy-duty cast aluminum covers offer improved durability and a premium underhood appearance. The raw aluminum finish is specifically designed for those who want to custom powder coat their engine components to match a specific build theme.

These covers are engineered for a seamless installation, retaining all factory coil cover mounting provisions and the critical oil separator drain back port. This kit is comprehensive, providing the necessary gaskets and hardware required to complete the swap without sourcing additional OE parts.

• Manufacturer Part Number: M-6067-M52S
• Material: Cast aluminum for superior heat dissipation and strength
• Finish: Raw aluminum (ready for custom powder coating)
• Functional Retainment: Maintains factory coil cover provisions and oil separator drain back port
• Complete Kit: Includes camshaft covers, gaskets, VCT solenoid grommets, fasteners, and a new engine oil cap

Fits 2021-2025 Ford F-150 Raptor. Upgrade the exterior of your Raptor with this premium carbon fiber tailgate panel from Ford Performance. This panel is a direct replacement for the original equipment (OE) component, providing a high-end, motorsport-inspired aesthetic with a precise fit and finish.

Constructed from 3K 2x2 twill carbon fiber cloth, each panel is manufactured using an autoclave process for maximum strength and durability while maintaining a lightweight profile. The exterior is finished in a brilliant high-gloss coating that protects the weave and enhances the visual depth of the carbon fiber. For a complete factory-level installation, this kit includes genuine Ford and Raptor emblems, along with all necessary fasteners and hardware.

• Manufacturer Part Number: M-16600-FG
• Material: 3K 2x2 Twill Carbon Fiber Cloth
• Manufacturing Process: Autoclave cured
• Finish: High-Gloss
• Direct replacement for factory tailgate panel
• Includes Ford and Raptor emblems
• Complete with all required installation hardware and materials

Fits 2018-2023 Ford Mustang GT and GT Premium models equipped with the 5.0L 4V Ti-VCT engine.

This comprehensive Ford Performance camshaft drive kit provides all the necessary components to refresh or rebuild the timing system on your Gen 3 Coyote engine. Featuring high-strength production components, this kit ensures precise valve timing and long-term reliability for both stock and high-performance applications. The inclusion of a forged steel crankshaft sprocket offers superior durability compared to standard cast units, while new VCT phasers and tensioners restore factory-spec timing control.

Manufacturer Part Number: M-6004-A5018

• Primary and secondary timing chains
• Forged steel crankshaft sprocket
• Primary and secondary timing chain tensioners
• Camshaft VCT phasers and assembly bolts
• Tensioner arms and chain guides
• Dowel pin and necessary fasteners

Fits select 2000-2005 Ford Focus models (LX, SE, SVT, ZTS, ZTW, ZX3, ZX4, ZX5, and ZXW).

The Ford Racing SVT Focus suspension kit is engineered to provide significantly better body control and sharper handling compared to standard factory dampers. Developed as a performance-tuned upgrade, this kit utilizes SVT-spec valving to reduce body roll and improve stability during spirited driving without compromising overall ride quality. It is an ideal solution for refreshing a worn suspension or upgrading a non-SVT Focus to a more capable setup.

This comprehensive kit includes the critical components needed to refresh the front and rear dampening systems, ensuring all mounting hardware and seats are replaced for optimal performance and quiet operation.

• Part Number: M-18000-ZX3
• Performance-tuned SVT valving for superior handling
• Direct fit for first-generation Ford Focus chassis
• Includes two front struts with integrated strut mounts and spring seats
• Includes two performance-matched rear shocks

Fits 2021-2024 Ford Bronco Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Raptor, and Wildtrak.

Enhance your off-road visibility with this Ford Racing Mirror Mounted Light Kit. Developed in collaboration with Rigid Industries, these 4-inch round LED lights are engineered to bolt directly to the factory mirror locations on the sixth-generation Ford Bronco. The kit features a Drive beam pattern, providing a wide and balanced spread of light that is ideal for navigating technical trails and dark terrain.

Each light is built for long-term durability with a 50,000-hour LED lifespan and high-efficiency 28W power draw. This comprehensive kit includes everything needed to add professional-grade auxiliary lighting to your vehicle while maintaining a clean, integrated look.

• Manufacturer Part Number: M-15200K-BML
• Light Type: 4 in. Round Rigid LED
• Light Pattern: Drive
• Raw Output: 8600 Lumens
• Effective Output: 3060 Lumens
• Power Consumption: 28W
• Lifespan: 50,000 Hours
• Quantity: Sold as a Pair

Fits select 2011-2017 Ford F-150 and Mustang models equipped with the 5.0L Coyote engine. Ensure a leak-free and professional oil pump replacement with this comprehensive installation kit from Ford Racing.

When performing an oil pump service on the 5.0L Coyote platform, reusing old gaskets and torque-to-yield hardware can lead to premature failure. This kit provides the critical sealing components and high-quality hardware required to restore factory performance. The included crankshaft damper bolt is a critical replacement item to ensure proper harmonic balancer retention after the front cover is removed.

• Official Ford Racing component (MPN: M-6600-A50PKIT)
• Includes timing cover gaskets and seals
• Includes oil pan gaskets and damper seals
• Includes new crankshaft damper bolt
• Designed for 5.0L Coyote engines
• Note: Oil pump pickup tube is not included

Fits 2015-2025 Ford F-150 models including Raptor, King Ranch, Lariat, and XLT.

Protect your truck's interior from daily wear and tear with this genuine Ford Performance Door Sill Plate Set. These sill protectors are designed to prevent scuffs and paint damage while providing a custom, performance-inspired look every time you open the door. Built to the exact standards of Ford Performance, this set ensures a perfect fit for the 13th and 14th generation F-150 chassis.

• Authentic Ford Performance accessory
• Protects factory door sill paint from scratches and debris
• Durable construction for long-lasting cabin protection
• Simple installation process
• Manufacturer Part Number: M-1613208-F15A

Vehicle Fitment

Fits 2011-2014 Ford Mustang GT and Boss 302 (5.0L).

Ensure precise valve timing and long-term durability with the Ford Racing Camshaft Drive Kit. Designed specifically for the 5.0L 4V Ti-VCT Coyote engine, this kit includes the essential production components needed to refresh your engine's timing system. It features specialized BOSS primary timing chain tensioners for improved reliability under high-performance conditions. This all-in-one package eliminates the guesswork of sourcing individual fasteners, chains, and phasers.

• Includes camshaft VCT phasers, bolts, dowel pins, and fasteners
• Includes tensioner arms, chain guides, and crankshaft sprocket
• Includes BOSS primary timing chain tensioners
• Includes primary and secondary timing chains
• Includes secondary timing chain tensioners
• Made in the USA
• Manufacturer Part Number: M-6004-A504

Fits 2015-2025 Ford F-150 models, including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, and Tremor.

Add a signature look to the front of your truck with this Ford Performance Tow Hook Kit. These heavy-duty hooks are a direct replacement for original equipment, providing a functional recovery point with a distinct aesthetic upgrade. Each hook is manufactured from high-strength steel and finished in the iconic Ford Performance Blue powder coat for maximum durability and corrosion resistance.

• Manufacturer Part Number: M-18954-F15B
• Construction: High-strength steel
• Finish: Ford Performance Blue Powder Coat
• Quantity: Sold as a pair (Left and Right sides)
• Installation: Direct replacement for factory front tow hooks

Fits select 2021-2025 Ford Bronco 4-Door models (excluding Raptor), including Badlands, Big Bend, Black Diamond, Outer Banks, and Wildtrak.

Transform your Bronco’s off-road capability with the HOSS 3.0 suspension package, the same high-performance system found on Wildtrak models. Engineered with a Prerunner mindset, this kit is centered around FOX 2.5 internal-bypass shocks featuring remote reservoirs. These five-zone, rate-sensitive dampers provide progressive control, transitioning from plush compliance over stutter bumps to maximum damping force to prevent bottoming out on significant drops.

This direct bolt-in replacement provides approximately 2 inches of lift on non-Sasquatch equipped vehicles, significantly improving off-road geometry. The front approach angle increases to 44.3 degrees (from 35.5 stock), while the rear departure angle improves to 37 degrees (from 29.7 stock). Each kit includes a HOSS 3.0 specific rear stabilizer bar and heavy-duty endlinks to maintain stability and cornering performance on and off the trail.

• FOX 2.5 internal-bypass shocks with 5-zone damping and remote reservoirs
• Approximately 2 inches of lift for optimal ground clearance
• Increases approach angle to 44.3 degrees and departure angle to 37 degrees
• Heavy-duty HOSS 3.0 rear stabilizer bar and sway bar endlinks included
• Direct-fit installation using factory mounting points
• Validated through Ford durability testing and NORRA 1000 competition
• Manufacturer Part Number: M-18000-B2

Fits select 2015-2020 Ford Mustang models, including GT, EcoBoost, Bullitt, and Shelby GT350, GT350R, and GT500.

Engineered by Ford Performance, this front tow hook assembly is designed for enthusiasts who require a reliable, track-ready recovery point. Unlike universal aftermarket options, this component is developed using proprietary vehicle data and rigorous testing processes to ensure structural integrity and perfect integration with the Mustang chassis.

• Manufacturer Part Number: M-17954-FA
• Genuine Ford Performance racer-engineered component
• Designed specifically for 2015-2020 high-performance Mustang variants
• Durable construction for reliable use in race and track environments
• Optimized fitment based on OEM engineering standards

Fits 2021-2025 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, Stroppe, and Wildtrak).

Give your front profile a custom aesthetic with the Ford Racing Matte Black Grille Lettering Overlay Kit. These individual B-R-O-N-C-O letter emblems are engineered to fit precisely over your vehicle's factory-installed grille letters, providing a stealthy finish without the need for permanent modifications.

Constructed for long-term durability, these overlays feature a weather-resistant matte black finish that is car-wash safe and resistant to peeling or fading. Installation is straightforward and requires no drilling; the kit uses pre-applied, automotive-grade 3M adhesive backing to ensure a secure, long-lasting bond to the production grille letters.

• Individual B-R-O-N-C-O grille letter emblem overlays
• Durable matte black finish resistant to weathering and car washes
• Easy peel-and-stick installation with pre-applied 3M adhesive backing
• No drilling or tools required for application
• Designed to align perfectly with existing production grille letters
• Manufacturer Part Number: M-1447-BLMB

Fits select 2011-2016 Ford Mustang and F-150 (5.0L).

Maintain consistent ignition performance and restore factory reliability with this set of genuine Ford Racing ignition coils. Specifically engineered for the 5.0L 4V Ti-VCT Coyote V8, these coils deliver the precise, high-voltage spark required to optimize combustion and prevent misfires under load. Whether you are conducting a routine service on a high-mileage vehicle or completing a custom engine build, these OEM-grade components provide the exact electrical characteristics and physical tolerances required by the Coyote platform.

As a direct replacement for the original equipment, these coils bolt directly into the factory mounting points and plug into the existing wiring harness. These are the same trusted units found in factory applications, ensuring long-term durability and resistance to engine bay heat and vibration.

• Manufacturer Part Number: M-12029-M50C
• Engine Compatibility: 5.0L 4V Ti-VCT Coyote V8
• Configuration: Direct-fit OEM replacement
• Included: Complete set of 8 ignition coils
• Application: Fits 2011-2016 Ford Mustang and F-150 models

Fits 2015-2017 Ford F-150 and Mustang GT models equipped with the 5.0L Coyote engine. This Ford Performance Coyote Gen 2 Oil Filter Adapter Kit is an essential component for engine swaps and custom chassis builds where accessory or frame clearance is limited.

Designed to solve interference issues, this adapter screws directly into the factory oil filter location on the engine block. It re-indexes the filter, rotating it toward the front of the engine to provide the necessary room for steering racks, crossmembers, or other chassis components found in non-stock applications.

• Manufacturer Part Number: M-6880-M501
• Rotates oil filter toward the front of the engine for increased clearance
• Direct-fit screw-in installation to the engine block
• Ideal for engine swaps and modified chassis configurations
• Maintains reliable oil flow for Gen 2 Coyote 5.0L engines

Fits select 1996-2006 Ford GT and Mustang models including GT, Mach 1, and SVT Cobra (5.4L).

This Ford Racing Modular Rocker Arm Set (M-6529-MSVT) is engineered to enhance valve train stability while significantly reducing internal friction. Constructed with high-strength extruded aluminum bodies, these rocker arms feature a needle-bearing fulcrum for smooth operation and reduced parasitic drag. To ensure long-term durability, Ford incorporates a precision roller tip that minimizes side-loading on the valve guides, preventing premature wear and maintaining consistent valve timing under high-load conditions.

• Reduces valve train friction for improved efficiency
• Increases overall valve train stability at high RPM
• Extruded aluminum bodies provide high strength and low mass
• Needle-bearing fulcrum ensures smooth, reliable rotation
• Precision roller tips decrease wear on valve guides
• Complete set for Modular engine applications
• Manufacturer Part Number: M-6529-MSVT

Fits 2011-2017 Ford Mustang GT (5.0L).

Ensure your drivetrain's integrity with this Ford Racing Flywheel Bolt Kit. Designed as a direct OE replacement, these high-strength fasteners are essential for securing the flywheel to the crankshaft on manual transmission-equipped Coyote engines. Because flywheel bolts are subjected to significant shear stress and torque, replacing them during a clutch or flywheel service is a critical step in maintaining long-term reliability and safety.

• Direct replacement for factory hardware
• Designed specifically for manual transmission flywheels
• Engineered for precise fitment and torque retention
• Made in the USA
• Manufacturer Part Number: M-6379-C

Fits select 2015-2018 Ford F-150 and 2015-2017 Ford Mustang GT (5.0L).

Built for race applications and high-performance builds, this Ford Racing crankshaft sprocket provides critical durability for the 5.0L Coyote engine. The factory crankshaft sprocket is manufactured from powdered metal, which is sufficient for stock power levels but can become a failure point when subjected to the increased stress of high RPMs or belt-mounted power adders like superchargers.

This forged steel replacement is approximately five times stronger than the factory component, offering essential protection against catastrophic engine failure. Produced by an OEM manufacturer to minimum allowable tolerances, it ensures a precise fit and long-term reliability for enthusiasts demanding more from their drivetrain.

• Manufacturer Part Number: M-6306-M50A
• Material: Forged Steel for maximum tensile strength
• Strength: Approximately 5x stronger than factory powdered metal sprockets
• Application: Ideal for forced induction and high-RPM race engines
• Installation: Replaces factory crankshaft sprocket without modification

Fits 2021-2025 Ford Bronco models (2.3L) including Badlands, Base, Big Bend, Black Diamond, Everglades, Heritage Edition, and Outer Banks. This axle-back exhaust system is specifically tuned to enhance your vehicle's performance with an aggressive exhaust note and high-flow efficiency.

Built for durability and precision, this system is constructed from high-quality 304 stainless steel. It features 2.75-inch inlet piping and 2.5-inch tailpipes, utilizing ultra-smooth mandrel bends to minimize restriction and maximize exhaust flow. The system is finished with dual 3.5-inch black chrome-plated stainless steel tips for a premium, rugged appearance. This kit is designed for a direct-fit installation, utilizing the vehicle's factory exhaust hangers and mounting points.

• Fits 2021-2025 Ford Bronco 2.3L engines
• Tuned for aggressive sound and optimum exhaust flow
• Full 304 stainless steel construction for corrosion resistance
• 2.75-inch inlet and 2.5-inch tailpipes with mandrel bends
• Dual 3.5-inch black chrome-plated stainless steel tips
• Retains factory mounting points and hangers for easy installation
• Manufacturer Part Number: M-5230-BR3SB