Our 4/6 drop for the 2014-16 GM 1500 is the perfect way to drop your ride. This kit comes with 2 inch dropped spindles and 2-inch drop coils for the front. The spindles help keep the factory like ride while the springs firm up the ride giving the vehicle better all-around performance. The rear comes with a Maxtrac 6 inch axle flip kit level out the stance of the vehicle. The kit also includes rear shocks to help optimze that vehicles overall performance.

• Universal Application

This Part Fits:

This Part Fits:

The Maxtrac Suspension 4-inch lift for the Toyota Tacoma is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Fox 2.0 monotube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

• Allowing A Larger Tire Size

This Part Fits:

The Maxtrac Suspension 4-inch lift for the Toyota Tacoma platform is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

• Trimming May Be Required For Optimal Fender Well Clearance

This Part Fits:

This Part Fits:

The Maxtrac Suspension 4-inch lift for the Ford Ranger is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The rear lift comes with Maxtrac lift shackle. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

• Made In The USA

This Part Fits:

MaxTrac 01-09 Ford Ranger 2WD/4WD w/Torsion Bar Susp. (Non Stabilitrak) 3in/2in Torsion Key Lift Kit

• Made In The USA

This Part Fits:

This Part Fits:

Adaptive 4-Link System; Drivers And Passengers Side 4-Link Arms And Brackets;

• Front Forged Four Link Upgrade Kit

This Part Fits:

Our 2/4 drop is a great way to lower and level out your vehicle without breaking the budget. This budget friendly kit comes with a 2-inch lowering coil springs and shocks for the front. We then drop the rear comes with a 5 inch flip kit and rear twin tube shocks for a better ride. What makes this kit great is you can always add or remove components to get the look you're after.

• Universal Application

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

Rear air ride replacement sensor rods. These rods replace the shorter factory rod ends to correct air sensor articulation on GM SUV s. Qty (2) aluminum rods threaded on both ends.

• Replaces Stock Sensors

This Part Fits:

This Part Fits:

MAX TRAC SUSPENSION'S PART# 946760-1 IS A BOX KIT (BOX 1) INCLUDING STEERING KNUCKLES CAST FROM DUCTILE STEEL & E-COATED BLACK

• Suspension Component Box

This Part Fits:

This Part Fits:

MAX TRAC SUSPENSION'S PART# 943300-4 IS A BOX INCLUDING PASSENGER SIDE 4-LINK ARMS, BRACKET & HARDWARE

• Suspension Component Box

This Part Fits:

MAX TRAC SUSPENSION'S PART# 943300-3 IS A BOX INCLUDING DRIVER SIDE 4-LINK ARMS, BRACKET & HARDWARE

• Suspension Component Box

This Part Fits:

MAX TRAC SUSPENSION'S PART# 943300-2 IS A BOX KIT INCLUDING RADIUS ARM DROP BRACKETS & HARDWARE

• Suspension Component Box

This Part Fits:

MAX TRAC SUSPENSION'S PART# 941570-1 IS A BOX KIT (BOX 1) INCLUDING STEERING KNUCKLES CAST FROM DUCTILE STEEL & E-COATED BLACK

• Steering Knuckle

This Part Fits:

This Part Fits:

MAX TRAC SUSPENSION'S PART# 941370-2 IS A BOX KIT (BOX 2) INCLUDING SUBFRAMES & A PAIR OF MAX TRAC REAR SHOCKS

• Subframe

This Part Fits:

MAX TRAC SUSPENSION'S PART# 941370-1 IS A BOX KIT (BOX 1) INCLUDING STEERING KNUCKLES CAST FROM DUCTILE STEEL & E-COATED BLACK

• Steering Knuckle

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

MAX TRAC SUSPENSION'S PART# 906820F IS A REAR BOX KIT INCLUDING 2" LIFT BLOCKS, U-BOLTS & A PAIR OF FOX 2.0 PERFORMANCE SERIRES REAR SHOCKS

• Increased Ground Clearance

This Part Fits:

MAX TRAC SUSPENSION'S PART# 906820 IS A 2" REAR BOX KIT INCLUDING 2" LIFT BLOCKS, U-BOLTS & A PAIR OF MAX TRAC REAR SHOCKS

• Allowing A Larger Tire Size

This Part Fits: