Every Dinan tuned anti-roll bar on the other hand is built and tuned specifically for each targeted BMW chassis to provide a more responsive and crisp experience. By reducing the amount of body roll your BMW is kept much closer to level than stock (while still allowing just enough body roll) to improve mechanical grip. This improvement gives the driver a much more planted and confident feeling in every corner making it a must-have upgrade for back road and track enthusiasts alike.

• Made of high tensile strength alloy steel with tubular (hollow) construction for maximum strength while limiting weight
• Rear bars are 2-hole adjustable allowing you to fine tune settings for environment or comfort preference
• Larger, more robust, bars; Front - 28mm size (vs. stock 26.1mm), Rear - 19mm size (vs. stock 17.8mm)
• Increased stiffness to combat roll; Front - 50% stiffer, Rear - 54-66% stiffer
• Includes polyurethane bushings and grease
• More stable at the limit
• More mechanical grip
• Less body roll

This Part Fits:

Improve your car's performance and handling with the Eibach Anti-Roll-Kit. This kit is designed to reduce body roll when cornering, resulting in improved stability, better handling, and increased driver confidence. The kits include front and/or rear stabilizer bars made from high-strength steel for durability and precision along with all necessary mounting hardware. Installing this kit is a great way to take your driving experience to the next level!

• Engineered and Tested for Each Vehicle Application:
• Compatible with OEM and Performance Setups:
• Precision-Tuned for Balance and Control:
• Increased Vehicle Stability:
• Made by Eibach in the USA

This Part Fits:

Fits 2003-2023 Ram 2500 and 3500 4x4 models.

The Carli Torsion Sway Bar Arms and End Link Kit is engineered to replace the restrictive factory sway bar components on your Ram Heavy Duty. By moving to a torsion-style system, this kit allows for greater independent front wheel travel and significantly reduces the side-to-side head toss often experienced on uneven terrain with a rigid OEM bar. These components are designed to work in conjunction with a torsion bar to provide a more linear spring rate through the suspension cycle.

• Includes heavy-duty torsion arms and vehicle-specific end links
• Improves off-road articulation while maintaining controlled on-road handling
• Direct fit for 4x4 Ram 2500/3500 platforms (2003-2023)
• Reduces harshness transmitted through the front suspension
• Includes all necessary mounting hardware for installation

Fits 2014-2023 Ram 2500 and 3500 4x4 trucks equipped with a 3-inch Carli Torsion Sway Bar system.

Maintain the smooth, bind-free performance of your Carli Torsion Sway Bar with this replacement frame bracket bushing and hardware kit. Designed specifically for the 3-inch lift height configuration, these bushings isolate the sway bar within the frame brackets to ensure quiet operation and consistent torsion rates. Over time, road debris and heavy articulation can wear down original components; this kit provides a direct refresh to eliminate slop and restore the precision of your suspension's lateral control.

• Replacement polyurethane bushings for Carli Torsion Sway Bar frame brackets
• Specifically sized for 3-inch lift height brackets
• Includes all necessary Grade 8 mounting hardware
• Restores quiet, bind-free sway bar operation
• Compatible with 2014-2023 Ram 2500/3500 4x4 models

Fits 2013-2025 Ram 2500 and 3500 4x4 models across all trim levels.

The factory sway bar on heavy-duty Ram trucks is a rigid component designed for maximum payload, which often results in a harsh, over-dampened feeling during street driving or off-road use. The Carli Torsion Sway Bar replaces this restrictive factory bar with a system that allows a controlled degree of independent side-to-side axle movement before the torsion rate progressively engages. This transition significantly reduces the intrusive chassis chatter and "head-toss" associated with the stock bar while maintaining the lateral stability needed for surgical precision during high-speed cornering.

• Compatible with suspension lift heights from 0 to 4 inches.
• Improves front suspension articulation and off-road tracking.
• Provides an on-road feel reminiscent of independent front suspension.
• Reduces harshness on small bumps without sacrificing towing or hauling control.
• Specifically engineered for 4x4 Ram heavy-duty chassis platforms.

Fits 2013-2015 Chevrolet Camaro LS, LT, SS, ZL1, and 2014-2015 Camaro Z/28.

Improve the cornering flat-ness and handling balance of your Fifth-Gen Camaro with the BMR Suspension SB039 front and rear sway bar kit. Designed to significantly increase torsional spring rates over factory units, this kit allows you to effectively control body roll and fine-tune your vehicle's understeer and oversteer characteristics. Unlike hot-formed bars, BMR sway bars are cold-formed from heavy-wall DOM tubing to better resist torsional fatigue and retain their "memory" over years of hard use.

Precision is key in suspension geometry; these bars are CNC-formed for exact tolerances and feature thrust washers welded directly to the bar to prevent lateral movement during high-G cornering. The kit includes 88-durometer, low-deflection polyurethane bushings that are internally fluted to retain grease for quiet, smooth operation. The package is rounded out with reinforced steel mounting brackets designed to minimize deflection under heavy loads.

• Manufacturer Part Number: SB039
• Front Bar: 29mm heavy-wall hollow DOM tubing
• Rear Bar: 32mm heavy-wall hollow DOM tubing
• Finish: Black Hammertone powder coat
• Bushings: 88-durometer fluted polyurethane
• Adjustability: Front and rear adjustable mounting points
• Construction: Cold-formed and CNC-bent for maximum durability
• Includes: Front and rear sway bars, polyurethane bushings, and reinforced mounting hardware

Fits select 2015-2026 Audi A3 and Volkswagen Golf, Golf SportWagen, GTI, and Jetta models with front-wheel drive and independent rear suspension.

The APR Rear Sway Bar is engineered to reduce body roll and improve cornering balance without sacrificing daily driving comfort. By minimizing weight transfer to the outer tires, this upgrade increases traction on the inner tires during spirited maneuvers. This bar features an adjustable spring rate, allowing you to customize handling characteristics to suit your driving style.

• Hollow Design: Constructed from high-tensile strength steel in a hollow configuration to minimize unsprung weight without compromising structural integrity.
• CNC-Bent Precision: Manufactured from a single piece of bar stock with no welds, significantly reducing the risk of fatigue or failure.
• Forge-Pressed Ends: Bar ends are forged into shape and quench-hardened in specialized fixtures for maximum strength at the mounting points.
• Corrosion Resistance: Finished in a durable red powder coat to protect against road debris and environmental wear.
• Direct Fit: Designed as a plug-and-play replacement for the factory rear sway bar using existing mounting points.

Fits 1983-1987 Toyota Corolla AE86.

The Whiteline Essential Vehicle Kit is a comprehensive suspension refresh solution designed to restore the handling precision and steering feedback of the legendary AE86 chassis. Over time, factory rubber bushings perish, crack, and soften, leading to suspension geometry deflection and a vague driving feel. This kit replaces those critical wear items with Whiteline's proprietary synthetic elastomer bushings, engineered to maintain alignment settings under high cornering loads without the harshness of solid mounts.

• Replaces primary suspension pivot points to eliminate unwanted movement and slop
• Synthetic elastomer construction provides superior durability and resistance to chemicals and weathering
• Improves chassis rigidity and steering response for both street and performance driving
• Designed as a direct-fit replacement for aged or failed OE rubber bushings

Fits select 2015-2020 Audi A3 Quattro, S3, RS3 and Volkswagen Golf R, Alltrack, and SportWagen.

The Whiteline BWK019 Sway Bar Kit is a comprehensive handling solution designed to reduce body roll and neutralize understeer. By increasing the chassis's torsional stiffness, this kit ensures your tires stay flatter through high-lateral-load cornering, maximizing the contact patch. The system features a 26mm 2-point adjustable front bar and a 24mm 2-point adjustable rear bar, allowing drivers to fine-tune the vehicle's balance for specific track conditions or street preferences.

This kit includes heavy-duty adjustable sway bar links that eliminate preload during installation and allow for up to 25mm of center-to-center length adjustment. Forged ends provide maximum strength at the link mounting points, while the included DIY lateral locks prevent the bar from shifting sideways under heavy load. The system utilizes Whiteline's synthetic elastomer bushings with internal bore knurling and PTFE lining for a low coefficient of friction, eliminating the need for periodic lubrication and preventing the squeaks associated with traditional poly bushings.

• Front Sway Bar: 26mm (2-point adjustable)
• Rear Sway Bar: 24mm (2-point adjustable)
• Adjustable Sway Bar Links: Up to 25mm length adjustment
• Bushings: PTFE-lined synthetic elastomer with knurled bores
• Finish: Corrosion-resistant powder coating and protective plating
• Includes: Lateral locks, mounting hardware, and installation guide
• Manufacturer Part Number: BWK019

Fits 1985-1995 Toyota MR2 (Base, GT, Super Charged, and Turbo).

The Whiteline BTK003 sway bar kit is a comprehensive handling upgrade designed to reduce body roll and increase mechanical grip. By linking the left and right wheels, these sway bars distribute cornering loads more effectively across the chassis, keeping the tires flatter on the pavement for more predictable turn-in and cornering stability.

This kit allows for precise chassis tuning through multiple adjustment points, enabling you to dial in the desired balance between understeer and oversteer. The components are engineered for long-term durability and consistent performance under spirited driving conditions.

• Manufacturer Part Number: BTK003
• Front Sway Bar: 20mm diameter, 3-point adjustable
• Rear Sway Bar: 20mm diameter, 2-point adjustable
• Includes high-quality mounting accessories for a complete installation
• Reduces body roll and improves weight transfer characteristics

Fits select 2018-2026 Kia Stinger (including GT, GT-Line, GT1, and GT2) and Genesis G70 models.

The Whiteline Front and Rear Sway Bar Kit (BKK001) is engineered to reduce body roll and improve the handling dynamics of your vehicle by increasing cornering stiffness. This packaged solution is designed to 'Activate More Grip,' providing a more balanced and precise driving experience during spirited cornering and high-speed maneuvers.

This kit features heavy-duty front and rear sway bars paired with Whiteline's advanced synthetic elastomer mounts. These bushings utilize internal bore knurling and grease retention lips to ensure optimum lubrication and quiet, long-lasting performance. By replacing worn factory components with this tuned sway bar set, you achieve greater stability and flatter cornering without sacrificing ride quality.

• Reduces body roll and improves steering response
• Synthetic elastomer bushings for durability and precise fitment
• Internal bore knurling and grease retention lips for superior lubrication
• Includes necessary mounting hardware and accessories
• Manufacturer Part Number: BKK001

Fits select 2018-2026 Genesis G70 and Kia Stinger (Base, GT, GT-Line, GT1, GT2, Sport, and Prestige).

The Whiteline BKK001 sway bar kit is a complete handling solution designed to reduce body roll, increase roll stiffness, and improve steering response. By increasing torsional resistance, these larger diameter bars keep the vehicle flatter through corners, providing a more balanced and predictable driving experience. This comprehensive kit includes both front and rear adjustable sway bars, allowing for fine-tuning of vehicle characteristics to suit specific driving conditions or preferences.

To ensure maximum efficiency, the kit features high-strength adjustable end links that eliminate sway bar preload and allow for precise on-car length adjustment. The included synthetic elastomer bushings utilize PTFE lining and internal bore knurling for superior grease retention and friction management, eliminating the need for frequent lubrication. Every component is built for durability, featuring forged ends, heavy-duty steel ball joints, and a protective powder-coated finish for long-term corrosion resistance.

• Multi-Point Adjustment: Allows for precise tuning of handling balance.
• Adjustable End Links: High-strength links with heavy-duty ball joints eliminate preload and improve turn-in response.
• Lateral Locks: DIY lateral locks prevent the sway bar from shifting sideways under heavy cornering loads.
• Advanced Bushing Technology: PTFE-lined synthetic elastomer bushings with grease retention lips for maintenance-free operation.
• Corrosion Protection: Tough powder coating and anodized alloy materials resist ozone, weathering, and road debris.
• Complete Kit (BKK001): Includes front sway bar, rear sway bar, adjustable end links, bushings, mounting hardware, and installation guide.

Fits select 2019-2020 Hyundai Elantra, Veloster, and Veloster N models.

Improve your vehicle's handling and cornering performance with the Whiteline Sway Bar Vehicle Kit. Designed to reduce body roll and increase lateral stiffness, this kit ensures a more stable and predictable chassis during spirited driving or track use. By spreading cornering loads more evenly across the tires, the sway bars help maintain a larger contact patch, significantly sharpening steering response and reducing understeer.

• Engineered to reduce body roll and improve overall chassis balance
• Manufactured from high-quality materials for long-lasting durability
• Includes premium synthetic elastomer bushings for quiet, reliable operation
• Direct fitment to factory mounting points for a straightforward installation

Fits select 2009-2020 Hyundai Genesis, Genesis Coupe, and Genesis G80 (2.0T / 3.8 / 5.0).

The Whiteline BHK016M sway bar kit is a comprehensive suspension solution designed to reduce body roll and improve chassis balance. By replacing restrictive factory bars with larger, adjustable units, this kit allows you to fine-tune your vehicle's handling characteristics for sharper turn-in and increased cornering stability. The multi-point adjustment allows for precise tuning to suit specific driving conditions or preferences.

• Front Sway Bar: 30mm 2-point adjustable
• Rear Sway Bar: 26mm 2-point adjustable
• Adjustable Sway Bar Links: Heavy-duty steel ball joints with up to 25mm of on-car length adjustment to eliminate preload
• Bushings: Synthetic elastomer with internal bore knurling and grease retention lips for consistent lubrication
• Finish: Protective E-Coat and powder coating for maximum corrosion resistance and durability
• Forged Ends: Provides maximum strength at critical sway bar link mounting points
• Lateral Locks: DIY locks prevent sideways movement of the bar under high cornering loads
• Included Hardware: High-quality mounting accessories and molybdenum disulphide (LM) grease
• Manufacturer Part Number: BHK016M

Each component is engineered to eliminate the flex associated with original equipment. The synthetic elastomer bushings are resistant to oil, grease, and weathering, ensuring long-term performance without the degradation common in rubber components.

Fits 2014-2017 Chevrolet SS (Base).

The Whiteline BHK012 Sway Bar Kit is a complete handling solution designed to reduce body roll, increase lateral grip, and improve the cornering balance of your chassis. By replacing the soft factory bars with high-stiffness units, this kit provides a flatter cornering attitude and more precise steering response. The front bar features a 4-point adjustment system, allowing you to fine-tune the handling balance from mild understeer to neutral rotation.

This kit utilizes Whiteline's advanced synthetic elastomer mounting bushings, which feature internal bore knurling and grease retention lips for consistent lubrication and quiet operation. The included heavy-duty sway bar links offer up to 25mm of on-car length adjustment, allowing you to eliminate sway bar preload and maintain proper suspension geometry after lowering the vehicle.

• Front Sway Bar: 30mm diameter, 4-point adjustable design.
• Rear Sway Bar: 27mm diameter, fixed rate.
• Construction: High-quality spring steel with protective coating.
• Bushing Material: Low-friction synthetic elastomer for immediate response.
• Adjustable End Links: Provides up to 25mm of center-to-center adjustment to eliminate preload.
• Part Number: BHK012
• Included Hardware: Front and rear sway bars, mounting bushings, adjustable end links, and installation accessories.

Fits 1996-2000 Honda Civic models including CX, DX, EX, GX, HX, LX, Si, and Value Package.

The Whiteline BHK009 Front and Rear Sway Bar Kit is a complete handling solution designed to reduce body roll and increase cornering grip. This kit replaces thin factory bars with a heavy-duty 27mm fixed front sway bar and a 22mm 2-point adjustable rear sway bar. By increasing the roll stiffness of your Honda Civic, this kit provides a more stable, predictable platform during high-speed cornering and rapid directional changes without compromising ride quality.

The 2-point adjustable rear bar allows you to fine-tune the vehicle's oversteer/understeer characteristics, ensuring the chassis is balanced for your specific driving style. Engineered for long-term durability and performance, this kit includes everything needed for a complete installation to get your Civic handling with precision.

• Part Number: BHK009
• Front Sway Bar: 27mm fixed diameter
• Rear Sway Bar: 22mm 2-point adjustable diameter
• Reduces body roll for flatter cornering and improved tire contact
• Includes rear sway bar links and all necessary mounting hardware
• High-quality bushings and hardware for a direct, bolt-on installation

Fits 2008-2009 Pontiac G8 and 2014-2017 Chevrolet SS.

The Whiteline BHK008 sway bar kit is a comprehensive handling solution engineered to reduce body roll and increase cornering grip. This kit replaces the flexible factory components with high-stiffness adjustable bars, allowing you to fine-tune your vehicle's chassis balance for better turn-in and flatter cornering. By eliminating the flex associated with original equipment links and bushings, this kit provides a more responsive and predictable driving experience during high-speed maneuvers and lane changes.

The included sway bars feature forged ends for maximum strength at the link mounting points, while the synthetic elastomer bushings utilize internal bore knurling and grease retention lips for consistent lubrication. The kit is finished with protective plating and powder coating for long-term corrosion resistance in harsh environments. DIY lateral locks are provided to prevent the bars from shifting sideways under heavy lateral loads.

• Manufacturer Part Number: BHK008
• Front Sway Bar: 30mm 4-point adjustable
• Rear Sway Bar: 22mm 3-point adjustable
• Sway Bar Links: Heavy-duty steel ball joint ends with up to 25mm on-car length adjustment
• Bushings: Oil, grease, and ozone-resistant synthetic elastomer
• Included Hardware: DIY lateral locks, mounting accessories, and molybdenum disulphide grease
• Installation: Direct bolt-on with included detailed guide

Fits select 2005-2013 BMW 1 Series and 3 Series models, including 128i, 135i, 325i, 328i, 330i, 335i, and 1 Series M.

The Whiteline BBK004 Sway Bar Kit is a comprehensive handling solution designed to reduce body roll and increase mechanical grip. By effectively distributing cornering loads across the chassis, this kit provides flatter cornering and more predictable handling during spirited driving or track use. The increased stiffness from the upgraded bar diameters helps neutralize understeer and improves steering response without sacrificing daily ride quality.

• Part Number: BBK004
• Front Sway Bar Diameter: 27mm
• Rear Sway Bar Diameter: 20mm
• Heavy-duty sway bar links included for precise load transfer
• High-quality mounting hardware and bushings included for a complete installation
• Durable powder-coated finish for long-term corrosion resistance

This kit replaces the factory sway bars and links, utilizing existing mounting points for a direct-fit installation. It is an ideal upgrade for E82/E88 and E90/E92/E93 chassis owners looking to stabilize the car's platform under high lateral G-forces.

Fits select 1991-2000 BMW 3 Series models, including 318i/is/ti, 323i/Ci/is, 325i/is/iX, 328i/Ci/is, and M3.

The Whiteline BBK001 Sway Bar Kit is a comprehensive handling upgrade designed to significantly reduce body roll and sharpen steering response. By increasing the roll stiffness of the chassis, this kit ensures flatter cornering and improved tire contact patches during high-lateral load maneuvers. The adjustable design allows drivers to fine-tune the vehicle's handling balance to neutralize understeer or oversteer based on driving conditions.

• Front Sway Bar: 27mm 3-point adjustable bar manufactured from high-grade steel.
• Rear Sway Bar: 22mm 2-point adjustable bar for precise rear-end tuning.
• Advanced Bushings: Synthetic elastomer bushings featuring internal bore knurling and grease retention lips for superior lubrication and service life.
• Reinforced Links: Includes front and rear sway bar links to eliminate the flex associated with aged OE components.
• Lateral Locks: DIY lateral locks are provided to prevent the sway bar from shifting sideways during aggressive cornering.
• Corrosion Resistance: Metal components feature a combination of protective plating and powder coating to withstand harsh environments.
• Installation Hardware: Supplied with mounting accessories, extreme pressure molybdenum disulphide (LM) grease, and a detailed install guide.

Fits 2008-2013 BMW M3 Base models.

The Hotchkis Sport Suspension front sway bar is engineered to transform the handling characteristics of the E9x M3 chassis. Designed for drivers who demand sharper turn-in and flatter cornering without sacrificing ride quality, this upgrade significantly reduces body roll and increases overall chassis stability during high-load maneuvers, autocross, or track sessions.

By optimizing the vehicle's roll stiffness, this sway bar allows for more precise maneuverability and improved balance. This premium kit replaces the factory front bar, utilizing engineering refined through Hotchkis' extensive road racing and drag racing experience to deliver a durable, performance-oriented suspension solution.

• Fitment: 2008-2013 BMW M3 (Base)
• Position: Front
• Application: Street, Autocross, and Track
• Benefits: Reduced body roll, increased stability, and improved steering response
• Retains factory-level ride comfort while increasing performance

Fits 2023-2026 BMW M2, M3, and M4 models (G8X chassis).

The Eibach Anti-Roll Bar Kit (E40-20-057-01-11) is engineered to significantly reduce body roll and increase cornering stiffness on the G8X platform. By increasing the torsional rigidity of the suspension, these bars provide more precise turn-in and improved mid-corner stability. This allows for flatter cornering without the harshness associated with overly stiff springs, maintaining a balanced ride for both street and track use.

Each bar is cold-formed from high-strength, aircraft-grade steel and finished with a durable powder coat for long-lasting protection against the elements. This kit includes both the front and rear bars to provide a complete handling solution for the latest generation M-cars.

• Front Bar Diameter: 29mm
• Rear Bar Diameter: 25mm
• Significantly reduced body roll during high-speed cornering
• Enhanced steering response and chassis balance
• Cold-formed from high-tensile strength steel
• Includes all necessary hardware for installation
• Manufacturer Part Number: E40-20-057-01-11

Fits 2022-2024 Subaru WRX models.

The Cobb Sway Bar Package (SUB006WRXSBP) is engineered to transform the handling dynamics of the VB chassis WRX by significantly reducing body roll and improving lateral stability. By increasing the roll stiffness with this matched front and rear set, the vehicle achieves sharper turn-in and more predictable behavior through high-speed corners without a harsh impact on ride quality.

• Reduces body roll for flatter cornering and improved tire contact patches
• Sharpens steering response and provides more communicative chassis feedback
• Complete kit includes both front and rear sway bars for balanced handling
• Direct replacement for factory components using existing mounting points
• Includes necessary bushings and hardware for a complete installation
• Manufacturer Part Number: SUB006WRXSBP

Fits 2022-2024 Subaru WRX.

The Cobb Daily Driver Suspension Package is engineered to sharpen the handling of your WRX without sacrificing the ride quality needed for your morning commute. This package focuses on reducing excessive body roll and improving steering response, providing a more connected and stable feel during cornering and high-speed transitions.

By optimizing the suspension characteristics for the street, this kit addresses the compromises found in stock components to eliminate "floaty" handling. It is a focused solution for enthusiasts who want their vehicle to feel more planted and predictable on both city streets and winding backroads while maintaining factory-like comfort.

• Precision fitment for 2022-2024 Subaru WRX
• Street-tuned performance for improved handling and stability
• Designed to reduce body roll and increase steering precision
• Bolts directly to factory mounting locations
• Manufacturer Part Number: SUB006WRXDDP

Fits 2008-2021 Subaru WRX and STI.

Upgrading to a stiffer aftermarket sway bar significantly increases the load on the factory mounting points, which can lead to chassis flex or even structural fatigue and tearing. The Cobb Rear Sway Bar Mount Reinforcement Kit (CB-1005) provides the additional bracing required to distribute these forces, protecting the vehicle's subframe while ensuring the sway bar performs as intended.

• Reinforces factory rear sway bar mounting points against fatigue
• Essential for vehicles equipped with larger diameter aftermarket sway bars
• Helps maintain consistent suspension geometry during hard cornering
• Direct bolt-on installation for a more rigid mounting surface
• Manufacturer Part Number: CB-1005

Fits select 1977-1996 Buick LeSabre and Roadmaster, Chevrolet Caprice and Impala SS, and Pontiac Bonneville and Catalina.

Enhance the cornering performance and lateral stability of your GM B-Body with this UMI Performance 3634-B rear sway bar. Designed to significantly reduce body roll, this solid 1.125-inch diameter bar provides a flatter, more controlled handling experience during spirited driving. The bar is engineered to mount in the factory location, maintaining the suspension geometry as originally designed by GM.

Constructed for durability and performance, this sway bar features a black powder-coated finish to resist corrosion and includes high-quality mounting hardware for a straightforward installation. This bar is a direct bolt-on for vehicles equipped with UMI rear control arms; if you are utilizing factory control arms, the optional 3636 bracket kit is required for installation.

• Part Number: 3634-B
• Bar Diameter: 1.125 in (28.5mm)
• Construction: Solid spring steel
• Finish: Black powder coat
• Installation: Direct bolt-on to UMI control arms (factory arms require 3636 bracket kit)
• Hardware Included: Yes

Fits select 2009-2024 Dodge and Ram 1500, 2500, and 3500 models, including 1500 Classic (4WD Only).

This Belltech anti-swaybar set significantly improves the handling and stability of your truck by reducing excessive body roll during cornering and lane changes. Engineered as a direct replacement for factory components, these bars provide a more centered and predictable driving experience without compromising ride quality. Each bar is cold-formed from solid steel for maximum torsional rigidity and finished with a durable gunmetal powder coat to resist corrosion and road debris.

The kit includes both front and rear performance sway bars, ensuring a balanced suspension setup. It comes complete with high-strength Grade 8 hardware and clear installation instructions for a straightforward bolt-on process that utilizes factory mounting points.

• Replaces worn OE bars to reduce body roll and improve cornering performance
• Cold-formed solid steel construction for long-lasting durability
• Durable gunmetal powder coated finish for superior corrosion resistance
• Includes high-strength Grade 8 mounting hardware
• Proudly made in the USA
• Manufacturer Part Number: 9935
• Limited Lifetime Warranty

Fits 2013+ Scion FR-S and Toyota 86.

The BLOX Racing Front and Rear Sway Bar Set is engineered to improve handling and stability by significantly reducing body roll during high-speed cornering. By increasing the suspension's torsional rigidity, these bars keep the chassis flat and the tires planted, providing more predictable steering response and increased lateral grip.

This kit is a direct-fit performance upgrade, replacing the factory anti-roll bars with a balanced front and rear configuration. It is an essential modification for enthusiasts looking to sharpen turn-in precision and overall vehicle control during spirited street or track driving.

• Complete set includes both front and rear sway bars
• Significantly reduces body roll for flatter cornering
• Improves steering feedback and overall chassis balance
• Designed as a direct replacement for OEM components

Fits 2024-2026 Toyota Tacoma models including SR, SR5, Limited, TRD Sport, TRD Off-Road, TRD PreRunner, TRD Pro, and Trailhunter.

The aFe CONTROL 2-way adjustable rear sway bar is engineered to dramatically reduce body roll and sharpen steering response without compromising ride quality. By increasing roll stiffness, this bar improves initial turn-in and provides the stability needed for technical driving or when hauling heavy loads and towing. Every bar is CAD-designed and CNC-bent from solid steel to strict tolerances, ensuring a precise fit and reliable operation under load.

This kit features 2-way adjustability, allowing you to fine-tune the handling balance and rear roll resistance of your truck. The bar utilizes laser-cut end plates robotically welded for consistent geometry. For long-term performance and ease of maintenance, aFe includes low-deflection polyurethane bushings and premium 6061-T6 billet aluminum brackets finished in black anodize and equipped with integrated grease fittings.

• 29mm (1.125in) diameter solid steel construction
• 2-way adjustability to dial in handling bias
• Durable red powder coat finish for corrosion resistance
• 6061-T6 billet aluminum bushing brackets with grease fittings
• Low-deflection polyurethane bushings for improved response
• Direct-fit installation requires no vehicle modifications
• CNC-bent and Made in the USA

Fits select 1992-2001 Honda Civic, Honda Civic del Sol, and Acura Integra. This Whiteline 22mm 2-point adjustable rear sway bar is engineered to "Activate More Grip" by significantly reducing body roll and spreading lateral loads more evenly across all four tires. By increasing the vehicle’s roll stiffness, this bar improves cornering performance, turn-in response, and safety without compromising daily ride quality.

• 22mm heavy-duty solid spring steel construction for maximum torsional stiffness.
• 2-point adjustability allows for fine-tuning of handling characteristics to suit your driving style.
• Includes premium synthetic elastomer bushings with internal bore knurling and grease retention lips for superior lubrication.
• PTFE-lined bushings eliminate the need for periodic re-greasing and prevent squeaking.
• Protective powder coating and plating resist corrosion and harsh environmental conditions.
• DIY lateral locks included to prevent the sway bar from shifting under heavy cornering loads.
• Manufacturer Part Number: BHR36XZ

Fits 1965-1970 Chevrolet B-Body models including Bel Air, Biscayne, Brookwood, Caprice, Estate, Impala, Kingswood, and Townsman.

The Ridetech MuscleBar Rear Sway Bar is engineered to significantly reduce body roll and improve the cornering stability of your classic full-size Chevrolet. This system replaces the often undersized or missing factory sway bar with a high-performance adjustable rate bar, allowing you to fine-tune your suspension's roll stiffness. The kit includes Ridetech's Posi-Link end links, which provide a direct, solid connection between the bar and the chassis, eliminating the flex and delay associated with traditional rubber or polyurethane bushings.

Designed for ease of installation and versatility, this MuscleBar is compatible with both factory trailing arms and Ridetech performance trailing arms. Each kit is supplied with all necessary heavy-duty mounting hardware for a secure, bolt-on upgrade.

• Adjustable rate design to customize handling and balance
• Posi-Link end links eliminate deflection for immediate response
• Compatible with stock or Ridetech trailing arms
• Comprehensive kit includes axle brackets, frame brackets, and U-bolts
• Precision-bent for exact fitment on 1965-1970 GM B-Body platforms
• Manufacturer Part Number: 11289102