The AutoMeter 9111 Sniper V2 EFI CAN Bridge provides a direct data link between Holley Sniper V2 EFI systems and AutoMeter instrumentation. This communication harness allows you to stream critical engine parameters directly from the EFI ECU to your dashboard, streamlining the installation process and ensuring high-accuracy data delivery without the need for redundant sensors.

• Directly bridges Holley Sniper V2 EFI systems to AutoMeter gauges and displays
• Simplifies installation by utilizing existing CAN bus data for RPM, temperature, and pressure
• Reduces engine bay clutter by eliminating the need for secondary sending units
• Plug-and-play connectivity designed for secure, reliable data transmission
• Manufacturer Part Number: 9111

The AEM Dual Channel Wideband UEGO controller provides the critical data needed to tune and protect high-performance engines with multiple cylinder banks. By monitoring both sides of a V6, V8, V10, or V12 engine simultaneously, this system ensures that individual bank variances are identified before they lead to engine damage. It is an essential tool for calibrators who require redundant, high-speed air-fuel ratio (AFR) monitoring to optimize combustion across the entire RPM range.

• Dual-channel monitoring for precise AFR data across both engine banks simultaneously
• Compatible with gasoline, methanol, ethanol, diesel, and propane fuels
• Dual 0-5V analog outputs for seamless integration with aftermarket ECUs and data loggers
• Utilizes laboratory-grade Bosch LSU 4.9 sensors for superior response speed and accuracy
• Weather-sealed harness and rugged controller housing designed for automotive environments

The dual-channel configuration eliminates the guesswork inherent in single-sensor setups on split-manifold exhaust systems. This allows for bank-specific fuel trim adjustments, ensuring each cylinder receives the proper mixture for maximum power and reliability.

The GReddy Sirius Control Unit (MPN 16001721) is the essential electronic hub required to operate any Sirius series gauge system. Whether you are running the transparent Sirius Vision, the analog Sirius Meter, or the combined Sirius Unify sets, this unit is necessary to process sensor signals and distribute data to your displays.

Designed to streamline complex interior wiring, the Sirius Control Unit allows for easy daisy-chaining of multiple gauges, reducing the need for redundant power and ground leads behind the dashboard. It provides a centralized point for all sensor inputs, ensuring accurate data transmission and a cleaner installation.

• Required for operation of GReddy Sirius Vision, Sirius Meter, and Sirius Unify
• Simplifies gauge wiring via a centralized data hub
• Supports daisy-chaining multiple gauges for a cleaner cockpit setup
• Manufacturer Part Number: 16001721

Fits 1987-1991 Jeep Wrangler YJ models including Base, Islander, Laredo, Renegade, S, Sahara, and Sport.

Restore accurate engine monitoring to your dashboard with this direct-fit replacement oil pressure gauge from Omix. Designed to match the factory appearance and needle sweep of the original equipment, this gauge ensures you can keep a close eye on your engine's lubrication system. This unit is built to OE specifications for a seamless installation into the factory instrument cluster without modifications.

• Direct-fit OE style replacement for proper fit and function
• Replaces original equipment part number 56001389
• Faceplate features clear markings for precise reading
• Designed for 1987-1991 YJ dashboard configurations
• Note: This is the gauge only; does not include housing
• Manufacturer Part Number: 17210.16
• Limited 5-year manufacturer warranty

Protect your engine from overheating with the AutoMeter Phantom II short sweep electric water temperature gauge (MPN 7537). Excessive heat is the primary cause of engine fatigue and performance loss; this 52.4mm (2-1/16") gauge provides the real-time data needed to monitor cooling system efficiency accurately. Utilizing a race-proven air-core electric movement, it delivers precise readings while keeping hazardous fluids safely outside the cabin.

The Phantom II series is engineered for clarity, featuring a clean white face with modern white LED through-the-dial lighting for superior visibility during nighttime use. This gauge is fully compatible with 12-volt and 16-volt electrical systems, making it a reliable choice for modern street cars and dedicated race builds alike.

• Range: 100-250°F
• Size: 52.4mm (2-1/16")
• Movement: Air-Core Electric (Short Sweep)
• Lighting: White LED through-the-dial
• Voltage: 12V and 16V compatible
• MPN: 7537

Kit Includes: 1/8" NPT temperature sender, 3/8" and 1/2" NPT adapters, mounting hardware, and detailed installation instructions.

Fits 1996-2000 Honda Civic CX, DX, EX, GX, HX, LX, Si, and Value Package models.

The BLOX Racing Gauge Cluster (BXGA-00201) is engineered to provide a clean, professional instrumentation solution for your 1996-2000 Honda Civic. Designed to integrate seamlessly with the EK-chassis interior, this component replaces or upgrades the factory housing to ensure a precise fit and clear visibility of your dashboard vitals. Whether you are restoring a daily driver or prepping a track-focused Si, this cluster housing maintains the structural integrity and aesthetic standards required for a factory-plus finish.

• Manufacturer Part Number: BXGA-00201
• Material: High-quality durable construction for long-term interior use
• Compatibility: Direct fit for all 1996-2000 Honda Civic trim levels
• Installation: Mounts to factory locations for a straightforward replacement

The AutoMeter Sport-Comp series mechanical boost/vacuum gauge is a legendary staple in performance builds, recognized for its precision and ruggedness. This 52mm (2-1/16 inch) gauge utilizes a patented, high-precision Bourdon tube meter movement to provide accurate, real-time pressure readings without the need for an electrical sensor or complex wiring.

Engineered for durability in harsh racing environments, the 3301 model features a 1/8-inch NPT pressure connection for a direct mechanical hookup to the intake manifold. The assembly requires no electrical power for the needle movement, ensuring reliability regardless of your vehicle's charging system state. Each gauge comes complete with a nylon line kit and the necessary fittings to simplify the installation process.

• Manufacturer Part Number: 3301
• Series: Sport-Comp
• Gauge Diameter: 52mm (2-1/16 inch)
• Range: 30 In. Hg. / 20 PSI
• Movement Type: Patented Bourdon Tube
• Connection: 1/8-inch NPT
• Included Hardware: 1/8-inch NPT fittings and nylon line kit

The AEM 30-2064 Universal Exhaust Back Pressure Sensor Install Kit is engineered to provide precise pressure measurements while protecting sensitive components from extreme heat. This kit is specifically designed for use with the AEM 4-Channel Wideband UEGO Controller, enabling tuners to mount wideband O2 sensors pre-turbo and obtain accurate air/fuel ratio (AFR) readings by compensating for exhaust backpressure.

By utilizing a stainless steel standoff tube and braided line, the system isolates the sensor from the direct heat of the exhaust manifold, preventing thermal damage without sacrificing response time. This is a critical addition for high-performance forced induction setups where accurate pre-turbo data is required.

• AEM High-Performance Stainless Steel 100 PSIG Pressure Sensor (Part# 30-2130-100)
• Stainless steel standoff tube with fittings to mitigate heat transfer
• High-durability stainless steel braided hose for flexible sensor mounting
• Includes weld-on and threaded bungs for secure installation
• Ensures accurate AFR data for wideband O2 sensors mounted pre-turbo
• Complete hardware kit for streamlined installation

The AutoMeter Cobalt Digital 5-60 PSI Boost Gauge is engineered for high-precision monitoring in diesel and high-boost gasoline applications. Built around race-proven digital stepper motor technology, this 52mm (2-1/16") gauge provides rapid response and exceptional accuracy. The unit performs a self-calibration sequence at every power-up to ensure consistent performance over time.

This comprehensive kit includes a data-acquisition grade, solid-state stainless steel pressure transducer with a 1/8" NPT thread. Designed to withstand the vibration and temperature extremes of performance engine bays, the solid-state sensor eliminates the need for mechanical boost lines inside the cabin. The bright blue digital display allows for immediate boost pressure identification from 5 to 60 PSI.

• Series: Cobalt Digital
• Diameter: 2-1/16" (52.4mm)
• Range: 5-60 PSI
• Sensor: 1/8" NPT stainless steel solid-state pressure transducer
• Voltage: 12V and 16V system compatible
• Display: Digital LED readout
• Includes: Direct-fit wiring harness, mounting hardware, and installation instructions
• Manufacturer Part Number: 6970

The Revel VLS 52mm Digital OLED Wideband Air/Fuel Ratio Gauge provides critical real-time engine data for tuning and performance monitoring. Featuring a high-contrast OLED display, this gauge ensures clear visibility in all lighting conditions while providing accurate AFR readings from 10.0:1 to 20.0:1.

As part of the VLS series, this wideband controller and display unit is designed for precision, allowing drivers and tuners to maintain optimal air-to-fuel ratios to prevent engine-damaging lean conditions. The digital OLED interface offers superior response times and a cleaner aesthetic compared to traditional needle-sweep gauges.

• Product Line: Revel VLS Series
• Display Type: Digital OLED
• Gauge Diameter: 52mm (2-1/16")
• AFR Range: 10.0:1 to 20.0:1
• Manufacturer Part Number: 1TR1AA005R

Monitor your engine's vitals with precision using the Revel VLS Series 52mm Digital OLED Oil Pressure Gauge. This essential instrument provides real-time tracking of oil pressure from 0 to 150 PSI, allowing you to detect potential lubrication issues before they lead to catastrophic engine failure.

Built with a high-contrast organic light-emitting diode (OLED) display, this gauge offers superior visibility compared to traditional LCD screens. The digital readout is sharp and easy to read from wide angles or in direct sunlight, while the standard 52mm diameter ensures compatibility with most aftermarket gauge pods and pillar mounts. The VLS series is designed for enthusiasts who demand accurate data with a clean, modern aesthetic.

• Manufacturer Part Number: 1TR1AA004R
• Pressure Range: 0-150 PSI
• Display Type: High-contrast digital OLED
• Diameter: 52mm (standard size)
• Provides critical data for engine health and lubrication system performance

The Revel VLS 52mm Digital OLED Oil Temperature Gauge provides precise, real-time monitoring of your vehicle's oil temperature within a 100 to 300 degree Fahrenheit range. Built with a high-contrast organic LED (OLED) display, this gauge offers superior clarity and a wider viewing angle compared to traditional digital displays, ensuring critical data is readable at a glance in any lighting condition.

Designed for seamless integration into standard 52mm (2-1/16 inch) gauge pods, the VLS series combines a clean, modern aesthetic with the accuracy required for high-performance applications. This unit allows drivers to monitor thermal trends and ensure the engine remains within safe operating temperatures during spirited driving or towing.

• Manufacturer Part Number: 1TR1AA003R
• Series: Revel VLS
• Gauge Type: Digital Oil Temperature
• Display: High-Contrast OLED
• Diameter: 52mm
• Temperature Range: 100-300 Degrees Fahrenheit

The Innovate Motorsports DB-Series digital gauge provides a precise, high-brightness interface for monitoring engine air/fuel ratios. Designed for tuners and performance enthusiasts, this 52mm (2 1/16") gauge features a vibrant blue LED display for high-contrast visibility in all lighting conditions.

This DB-Series unit is engineered as a cost-effective display solution for existing wideband setups. It connects directly to the serial or analog outputs of compatible lambda controllers to provide real-time data essential for tuning and engine health diagnostics.

• Manufacturer Part Number: 3793
• Display Type: High-brightness digital blue LED
• Diameter: 52mm (2 1/16")
• Compatibility: Designed for use with Innovate Motorsports LC-1, LC-2, LM-1, or LM-2 lambda controller kits
• Installation: Fits standard 52mm gauge pods and includes basic mounting hardware

Includes: DB-Series blue LED gauge, mounting hardware, and quick-start guide. Note: This is the gauge only and requires a separate wideband controller and sensor for operation.

Fits 1976-1986 Jeep CJ. This Kentrol gauge cover is an essential component for restoration projects or custom builds where the factory radio opening is not required. By eliminating the radio cutout, this cover provides a clean, uninterrupted dashboard appearance that tidies up the interior of your classic CJ.

Built to ensure a precise fit over factory mounting points, this gauge cover features a high-luster polished silver finish. It serves as both a protective layer for your dash and a significant cosmetic upgrade, replacing or covering aged and weathered original trim with hardware designed for long-term durability.

• Direct fit for 1976-1986 Jeep CJ models
• Custom design without radio head unit opening
• High-luster polished finish for a classic look
• Precision-stamped for accurate gauge alignment
• Manufacturer Part Number: 30521

Fits 1977-1986 Jeep CJ.

Refresh your classic Jeep dashboard with the Kentrol Gauge Cover. This precision-fit trim piece is designed to replace or accent the factory gauge surround, offering a significant aesthetic upgrade over weathered or faded original components. The polished silver finish provides a mirror-like luster that stands up to the environmental demands of open-cabin driving while maintaining its brilliance over time.

• Specifically engineered for 1977-1986 Jeep CJ models
• Bright polished silver finish for a premium interior look
• Direct fitment ensures a clean, professional appearance on the dash
• Durable construction designed for long-term reliability
• Manufacturer Part Number: 30412

The Innovate MTX-A Series (MTX Analog) 30 PSI Vacuum/Boost Gauge Kit provides precise, high-speed monitoring for forced induction applications. Built around a microprocessor-driven 270-degree stepper motor, this 2-1/16" (52mm) gauge is engineered to maintain steady needle placement in high-shock and high-vibration environments that often cause lesser mechanical gauges to flutter.

Equipped with the Innovate MTS (Modular Tuning System) serial in/out, this gauge integrates seamlessly with other Innovate devices or third-party MTS-enabled data loggers to expand your vehicle's diagnostic capabilities. The kit features a high-accuracy 4-Bar MAP sensor, ensuring reliable pressure readings even in high-performance builds. While the black faceplate is fixed, the kit includes both black and silver interchangeable bezels to match your interior aesthetic.

• Product Series: MTX-A (Analog)
• Measurement Range: 30 PSI Boost / Vacuum
• Gauge Diameter: 2-1/16" (52mm)
• Movement: High-torque 270-degree stepper motor
• Communication: Innovate MTS Serial In/Out for data logging
• Indicator: Programmable warning light
• MPN: 3908

Kit Includes: Gauge (Black Faceplate), Black Bezel, Silver Bezel, Serial Program Cable, 4-Bar MAP Sensor, MAP Accessory Kit (T-Fitting, Vacuum Hose, Zip Ties), and Quick Start Installation Guide.

Restore the accuracy of your monitoring system with this genuine Innovate Motorsports Replacement Temperature Sensor. Engineered as a direct service component (MPN 15-0049), this sensor provides the precise temperature data required by Innovate digital gauges and data logging hardware. Reliable temperature feedback is critical for monitoring engine health, preventing overheating, and making informed tuning decisions under load.

• Manufacturer Part Number: 15-0049
• Application: Designed for use with Innovate Motorsports gauges and data loggers
• Function: Monitors fluid (oil/coolant) or air temperatures depending on system configuration
• Build: High-sensitivity thermistor housed in a durable threaded body for consistent signal output
• Installation: Bolts into standard threaded ports for a secure, leak-free seal

Upgrade your vehicle's instrumentation with the Haltech iC-7 Display Dash (HT-067010). This 7-inch, full-color digital instrument cluster provides a crisp, high-brightness interface for real-time engine monitoring and data logging. Designed for seamless integration, it connects directly via CAN to supported Haltech ECUs or through the included OBD-II adapter for late-model factory engine management systems.

The iC-7 is built to handle the rigors of performance driving, featuring a transflective screen for excellent visibility even in direct sunlight. The kit includes all necessary cabling and mounting hardware to streamline the installation process into your custom or factory dashboard.

• High-brightness 7-inch color display (800 x 480 resolution)
• Direct CAN connectivity for Haltech Elite and Nexus series ECUs
• OBD-II connectivity for monitoring generic SAE PIDs on late-model vehicles
• Programmable shift light array and customizable screen layouts
• Manufacturer Part Number: HT-067010
• Includes: iC-7 Display, main wiring harness, OBD-II to CAN cable, and mounting hardware

The Grams Performance G2-99-0030 is a professional-grade 0-30 PSI (2.06 bar) fuel pressure gauge designed for high-vibration automotive environments. This gauge is glycerin-filled to effectively dampen needle flutter, ensuring stable and accurate readings at a glance even in high-performance or high-RPM applications where engine harmonics typically make standard gauges difficult to read.

Constructed for longevity and clarity, the G2-99-0030 features a matte black stainless steel case and bezel paired with a shatterproof polycarbonate lens. The internal brass and stainless steel components provide corrosion resistance for reliable service life. With its compact 1.5-inch face and standard 1/8-inch NPT fitting, it easily integrates into fuel rails or aftermarket fuel pressure regulators.

• Part Number: G2-99-0030
• Pressure Range: 0-30 PSI (2.06 bar)
• Face Diameter: 1.5 in. (38.1mm)
• Fitting Size: 1/8 in. (3.175mm) NPT
• Housing Material: Matte Black Stainless Steel
• Internal Construction: Stainless Steel and Brass
• Lens Material: Shatterproof Polycarbonate
• Vibration Control: Glycerin Filled

Fits select 1999-2007 Ford F-250 and F-350 Super Duty trucks (XL, XLT, Lariat, King Ranch, and Harley-Davidson editions).

Protect your engine with the precision of the AutoMeter Factory Match series fuel pressure gauge. Designed specifically to coordinate with factory Ford instrumentation, this 52.4mm (2-1/16") gauge uses a digital stepper motor to provide an accurate 270-degree full sweep for immediate, reliable readings. Whether you are running a high-performance fuel-injected setup or a carbureted build, monitoring pressure is critical for avoiding lean conditions and expensive component failures.

The included solid-state 1/8" NPT pressure transducer is built to withstand high vibration and engine bay heat better than mechanical alternatives. This electronic kit includes a direct plug-in wiring harness to simplify installation and features a 0.5 - 4.5V analog output for seamless integration with data loggers or EFI engine management systems.

• Measurement Range: 0-100 PSI
• Face Diameter: 52.4mm (2-1/16")
• Full sweep digital stepper motor movement
• 0.5 - 4.5V analog output for data logging
• Includes 1/8" NPT solid state pressure transducer
• Compatible with 12V and 16V electrical systems
• Manufacturer Part Number: 8463

Monitor your engine coolant temperatures with precision using the AutoMeter Sport-Comp 52mm Short Sweep Electronic Water Temperature Gauge. This metric-scale instrument utilizes race-proven air-core electric movements to provide quick and accurate readings while keeping hazardous fluids safely outside the vehicle cabin. Designed for versatility, the 3337-M is compatible with both 12-volt and 16-volt electrical systems, making it suitable for nearly any street or race application.

• Gauge Range: 40-120° Celsius
• Size: 52mm (2-1/16 in.)
• Movement: Short Sweep Air-Core Electric
• Electrical Compatibility: 12V and 16V systems
• Included Hardware: 1/8 in. NPT temperature sender, 3/8 in. and 1/2 in. NPT adapters, and mounting hardware
• Lighting: Bulb and socket assembly with red and green covers for customized illumination
• Part Number: 3337-M

Each kit comes complete with a high-accuracy 1/8 in. NPT temperature transducer and necessary adapters for a straightforward installation on a wide variety of engine blocks and coolant crossovers.

The AutoMeter 2267 adapter fitting provides a reliable solution for installing aftermarket pressure sensors into metric engine ports. This precision-machined brass adapter converts a standard M14x1.5 metric port to a 1/8" NPTF female thread, making it essential for mounting oil pressure or fuel pressure senders in various domestic and import applications.

• Manufacturer Part Number: 2267
• Material: Corrosion-resistant brass for a durable, leak-free seal
• Male Thread: M14x1.5
• Female Thread: 1/8" NPTF
• Application: Adapts 1/8" NPT sensors to metric oil galleries or filter housings

The AEM CD-7G Carbon Flush Digital Dash (PN 30-5702F) provides professional-grade data visualization in a sleek, flush-mount package. Featuring a 7-inch full-color screen with 800x480 resolution, this display is housed in a rugged, lightweight flow-molded carbon fiber composite enclosure. Designed for high-performance environments, the screen offers 1000cd/m2 brightness and an anti-glare filter for complete readability in direct sunlight.

This "G" model features an integrated 20Hz GPS receiver and antenna, enabling precise track mapping and lap timing out of the box. For monitoring and alerts, the dash includes seven ultra-bright, programmable LEDs for RPM and shift light indication, plus two additional programmable LEDs for auxiliary signals. The unit is IP66 water-resistant, making it a reliable solution for open-cockpit race cars and marine applications.

• Manufacturer Part Number: 30-5702F
• Display: 7-inch full-color 800x480 resolution screen
• GPS: Onboard 20Hz GPS receiver and external antenna included
• Housing: Flow-molded carbon fiber composite, flush-mount design
• Environmental: IP66 water resistance (open-cockpit safe)
• Visibility: 1000cd/m2 brightness with anti-glare filter
• Connectivity: AEMnet CAN-enabled; compatible with 2008-up OBDII via adapter (sold separately)
• Expandability: Supports up to 7 programmable pages including dedicated alarm and startup pages
• Software: Includes free DashDesign Graphics Editor for custom layout creation

The AEM CD-7 Carbon Flat Panel Display (PN 30-5700F) is engineered for professional-grade in-dash integration. Designed without integrated buttons or a bulky shade hood, this flush-mount version is the ideal solution for clean, recessed installations or custom dash panels with tight tolerances. The unit is housed in a lightweight, flow-molded carbon fiber composite enclosure and carries an IP66 water-resistance rating, making it safe for use in open-cockpit racing environments.

Equipped with a high-contrast 7-inch 800x480 resolution screen, the CD-7 Carbon is daylight readable with 1000cd/m2 brightness and a built-in anti-glare filter. Seven ultra-bright programmable LEDs span the top of the display for RPM and shift light indication, while two additional LEDs are available for user-defined alarms. The display accepts data from AEMnet CAN-enabled devices and third-party CAN bus systems, including 2008-up factory ECUs via an OBDII adapter (sold separately).

• Manufacturer Part Number: 30-5700F
• Display: 7-inch full color (800x480 resolution)
• Brightness: 1000cd/m2 (daylight readable)
• Housing: Flow-molded carbon fiber composite
• Water Resistance: IP66 rated
• LEDs: 7 programmable shift lights, 2 alarm LEDs
• Connectivity: Two-channel CAN bus (AEMnet and non-AEM)
• Features: Odometer function, night-dimming 'headlight-in' connection, and 200MB internal logging

The AEM CD-5G Carbon Flat Panel Digital Display (MPN 30-5602F) is engineered for high-performance vehicles requiring a seamless flush-mount installation. This version of the CD-5 Carbon series features a slim, flow-molded carbon fiber composite housing without integrated buttons or a shade hood, making it the ideal solution for custom dash enclosures or tight-tolerance cockpits. It features a high-speed internal 20Hz GPS receiver and antenna for precise tracking and lap timing.

Equipped with a full-color, 5-inch screen (800x480 resolution), the display is rated at 1000cd/m2 for exceptional readability even in direct sunlight. Seven ultra-bright, programmable LEDs span the top of the housing for RPM and shift light indication, while two additional LEDs are fully user-configurable. The CD-5G integrates with AEMnet CAN-enabled devices and non-AEM CAN bus systems, providing a centralized hub for engine data and vehicle diagnostics.

• Internal 20Hz GPS: Onboard receiver and antenna for accurate position and speed data.
• Display: 5-inch full-color screen with 800x480 resolution and anti-glare filter.
• Durability: IP66 water resistance allows for use in open-cockpit racing environments.
• Construction: Lightweight, rugged flow-molded carbon fiber composite enclosure.
• Connectivity: Supports AEMnet, non-AEM CAN bus, and 2008-up OBDII (with optional adapter).
• Programmable Layouts: Create custom pages or use supplied SAE warning icons with DashDesign software.
• Expansion: Compatible with remote button kits (30-3610) and VDM modules (30-2206) for advanced G-load and track mapping.

The AEM CD-5L Carbon Logging Flush Digital Dash (30-5601F) is engineered for custom dash enclosures and tight-tolerance flush mount installations. This unit provides the robust logging and display capabilities of the CD-5 series in a streamlined, flow-molded carbon fiber composite housing that eliminates the external buttons and integrated sun hood. Its 5-inch full-color screen features a high-speed 800x480 resolution and 1000cd/m2 brightness, ensuring vital engine data remains visible even in direct sunlight.

• Integrated Logging: Includes 200Mb of internal logging memory at rates up to 1,000Hz per channel.
• Visual Alerts: Features seven ultra-bright, programmable RPM/shift light LEDs and two additional programmable warning LEDs.
• Rugged Construction: IP66 water-resistant rating allows for use in open-cockpit or off-road environments.
• Connectivity: Accepts channels from AEMnet CAN-enabled devices, non-AEM CAN bus systems, and 2008+ factory ECUs via optional OBDII adapters.
• Customization: Fully compatible with DashDesign Graphics Editor software; supports over 200 SAE and custom warning icons.
• Flexible Inputs: Includes two extra switch inputs for user-triggered events like blinkers or high beams; odometer function included.

The CD-5L 30-5601F is compatible with carbureted and pre-2008 vehicles when paired with AEM CAN sensor modules. It supports external button kits (PN 30-3610) for page navigation and the AEM Vehicle Dynamics Module (PN 30-2206) for 3-axis G-load and GPS track mapping.

Monitor your turbocharger system performance with precision using the Turbosmart mechanical boost gauge. Designed for reliable, real-time pressure monitoring, this gauge provides accurate readings from 0 to 30 psi without the need for complex electronic sensors or calibration. Its simple mechanical operation makes it a dependable diagnostic tool for identifying boost leaks or ensuring your wastegate is performing as expected.

This 52mm (2-1/16") gauge features a high-contrast black face housed in a classic silver bezel, making it compatible with most standard gauge pods and pillars. Integrated backlighting ensures clear visibility during night driving or in low-light cockpit conditions. Because it utilizes a direct mechanical sweep, you receive an immediate, analog response to changes in manifold pressure.

• Measurement Range: 0-30 psi
• Gauge Diameter: 52mm (2-1/16")
• Operation Type: Mechanical
• Face Color: Black
• Bezel Finish: Silver
• Illumination: Bright backlighting included
• Manufacturer Part Number: TS-0101-2023

The Turbosmart TS-0402-2023 is a precision 0-100 PSI mechanical fuel pressure gauge engineered for high-performance fuel system monitoring. This liquid-filled gauge is specifically designed to dampen the needle against engine vibrations and rapid fuel pressure pulsations, ensuring steady and accurate readings in demanding environments.

• Pressure Range: 0-100 PSI
• Thread Size: 1/8 NPT male fitting
• Vibration Dampening: Liquid-filled housing for needle stability and component longevity
• Compatibility: Direct fit for Turbosmart FPR800, FPR1200, FPR2000, and FPR3000 series regulators
• Manufacturer Part Number: TS-0402-2023

Constructed for durability and precision, this gauge provides the critical data needed to verify fuel system health and dial in regulator settings accurately.

Monitor your manifold pressure with precision using the Turbosmart Mechanical Boost Gauge. This 52mm (2 1/16 inch) instrument is engineered for consistent accuracy and real-time response, providing a clear reading of engine vacuum and boost pressure up to 2 Bar. Designed to complement any performance cockpit, it features a high-contrast black face, a refined silver bezel, and bright backlighting for maximum legibility in all lighting conditions.

This mechanical gauge is a recommended pairing for Turbosmart Gated Boost Control Valves, allowing for reliable monitoring of boost levels without the need for complex electronic sensors. The unit comes complete with all necessary components for a clean installation into your dashboard or a gauge pod.

• Diameter: 52mm (2 1/16")
• Pressure Range: 0 to 2 Bar
• Aesthetics: Black face with silver bezel and white backlighting
• Type: Mechanical movement
• Included Hardware: Vacuum line hook-up kit and panel mounting bracket
• Manufacturer Part Number: TS-0101-2025

Fits 1987-1991 Jeep Wrangler YJ (Base, Islander, Laredo, Renegade, S, Sahara, and Sport).

Restore accurate monitoring of your engine's operating temperature with this Omix replacement engine temperature gauge. Designed as a direct-fit, OE-style component, this gauge installs into the factory dashboard cluster to replace a failed or inaccurate needle. This unit is precision-engineered to meet or exceed factory standards, ensuring the reliability required to prevent overheating during daily driving or trail use.

• Manufacturer Part Number: 17210.15
• Replaces OE Part Number: 56001387
• Design: OE Style needle and face for a factory-correct look
• Installation: Direct fit into the factory gauge cluster
• Note: Gauge unit only; housing is not included
• Warranty: Limited 5-Year Manufacturer Warranty