SSR Trail Series Wheel Center Caps provide a clean, professional finish for your off-road wheel setup. Designed specifically for the Trail series, these caps serve as a protective barrier for your vehicle's wheel hubs and axle nuts against mud, dust, and trail debris.

• Authentic SSR Trail Series component
• Durable flat finish for a rugged, low-glare appearance
• Direct-fit replacement for lost or damaged Trail series caps
• Protects hub assembly from environmental contaminants

Complete your wheel setup with an authentic SSR A-Type Super Low center cap. Engineered for a precision fit, these aluminum caps provide a clean, finished look while maintaining the lowest possible profile. The Super Low design is specifically intended for applications where axle nut clearance or a flush, minimalist aesthetic is a priority.

• Brand: SSR
• Model: A-Type
• Profile: Super Low
• Material: Aluminum
• Genuine SSR replacement component

Finish your wheel assembly with the authentic SSR Racing B-Type High Center Cap. This cap is designed specifically for SSR wheels requiring the B-Type fitment pattern. The High profile designation is essential for vehicles with taller hub assemblies or protruding axle nuts that prevent standard, flush-mount center caps from seating properly.

Constructed from lightweight, precision-machined aluminum, these caps offer superior durability and heat resistance compared to plastic alternatives. The black finish provides a clean, racing-inspired aesthetic while protecting the hub bore from road debris and weather exposure.

• Brand: SSR Racing
• Fitment Type: B-Type
• Profile: High (for increased hub clearance)
• Material: Machined Aluminum
• Finish: Black

Finish your wheel setup with the SSR Racing Sports Inspired Aluminum B-Type Center Cap. Engineered specifically for SSR wheel series requiring a B-Type fitment, this cap features a Super Low profile designed to provide a sleek, flush aesthetic and maximum clearance for applications with tight hub tolerances.

• Genuine SSR Racing Sports Inspired series accessory
• Precision-machined aluminum construction for long-lasting durability
• B-Type fitment specifically designed for compatible SSR wheels
• Super Low profile provides a streamlined, minimalist look
• Finished in a clean, understated black
• Sold individually

Maintain the clean, competition-ready look of your wheels with the SSR Racing Sports Inspired B-Type Super Low center cap. This aluminum cap is engineered for enthusiasts who prefer a minimal, flush-mount appearance that complements the wheel's spoke profile without unnecessary protrusion.

Constructed from lightweight and durable aluminum, this B-Type cap serves as a precise replacement or aesthetic upgrade. The Super Low configuration is specifically designed for applications where clearance and a streamlined, racing-inspired silhouette are the primary focus.

• Brand: SSR
• Series: B-Type
• Profile: Super Low
• Material: Aluminum
• Design: Racing Sports Inspired

Complete your SSR wheel assembly with this genuine SSR Racing B-Type center cap. Manufactured from high-grade aluminum, this Large/High profile cap is designed to provide additional hub clearance while delivering a clean, finished appearance. It serves as a functional barrier, protecting your wheel hubs and axle nuts from road debris and moisture.

• Genuine SSR Racing component
• B-Type fitment specification
• Large/High profile height for increased clearance
• Durable aluminum construction
• Sold individually (Single center cap)

Note: This is a special order item. Please verify your specific SSR wheel model and hub bore compatibility prior to purchase.

Finish your wheel setup with the SSR Racing Sports Inspired B-Type Low Aluminum Center Cap. Designed for wheels compatible with the SSR B-Type fitment, this low-profile cap provides a clean, flush-mount aesthetic that complements a performance-oriented look. The black finish offers a subtle, stealthy appearance that integrates seamlessly with dark or high-contrast wheel faces.

• Genuine SSR B-Type Low profile center cap
• CNC-machined aluminum construction for durability and precise fit
• Sleek black finish for a racing-inspired aesthetic
• Protects the hub bore and axle hardware from dust and road debris
• Part type: B-Type Low

Complete your wheel setup with an authentic SSR Racing B-Type Low Profile center cap. Precision-engineered from high-grade aluminum, this B-Type cap provides a clean, finished look while protecting your wheel's hub assembly from road debris and weather. The Low profile design is specifically intended for wheel configurations where clearance is a priority or a more flush aesthetic is desired.

• Genuine SSR Racing component
• Series: B-Type
• Profile: Low
• Material: Aluminum construction
• Enhances wheel aesthetics while protecting the hub bore
• Sold individually

The SSR GTX01 is a precision-engineered multi-spoke wheel designed for enthusiasts prioritizing both structural rigidity and a lightweight profile. This 19x9.5 wheel features a distinct Blue Gunmetal finish, offering a premium aesthetic that complements high-performance vehicle builds.

• Brand: SSR
• Series: GTX01
• Diameter: 19 inches
• Width: 9.5 inches
• Bolt Pattern: 5x120
• Offset: +38mm
• Finish: Blue Gunmetal
• Manufacturer Part Number: XA19950+3805HBG

Please note: This is a special order item. Due to the manufacturer's production and fulfillment process, orders for this product are final and cannot be cancelled once placed.

Ensure a precise, vibration-free fitment for your aftermarket wheels with this pair of SSR Plastic Hub Centric Rings. These components fill the gap between the 73.0mm center bore of the wheel and the 67.1mm vehicle hub, ensuring the wheel is perfectly centered. This prevents steering wheel oscillation, vibrations at highway speeds, and unnecessary stress on your wheel studs.

Constructed from high-strength, heat-resistant plastic, these rings are designed to maintain their shape during the thermal cycles of spirited driving and heavy braking. They provide a snug interface that makes wheel installation easier by holding the wheel in place while you thread the lug nuts.

• Outer Diameter (Wheel Bore): 73.0mm
• Inner Diameter (Vehicle Hub): 67.1mm
• Material: High-grade heat-resistant plastic
• Quantity: Sold as a pair (Set of 2)
• Manufacturer Part Number: 1SB2BB73671

Ensure a precise, vibration-free fitment for your aftermarket wheels with SSR Plastic Hub Centric Rings. These rings bridge the gap between a wheel's 73.0mm center bore and a vehicle's 66.1mm hub diameter, ensuring the wheel is perfectly centered during installation.

By centering the wheel precisely on the hub, these rings help eliminate steering wheel shimmy and high-speed vibration often caused by lug-centric mounting. These durable plastic rings are engineered for heat resistance and corrosion-free performance, providing a reliable and easily removable interface between the hub and the wheel bore.

• Manufacturer Part Number: 1SB2BB73661
• Outer Diameter (Wheel Bore): 73.0mm
• Inner Diameter (Hub Bore): 66.1mm
• Material: High-grade Heat-Resistant Plastic
• Quantity: Sold as a pair (2 rings)

Ensure a precise, vibration-free fitment for your aftermarket wheels with this pair of SSR Plastic Hub Centric Rings. These components bridge the gap between a wheel's 73.0mm center bore and a vehicle's 64.1mm hub diameter, ensuring the wheel is perfectly centered on the hub flange rather than relying solely on the lug nuts for alignment. This hub-centric fitment is critical for reducing steering wheel shake and preventing hardware fatigue.

Constructed from high-grade, heat-resistant plastic, these rings are designed to withstand the thermal cycles of daily driving and braking without seizing to the hub or the wheel bore. Their composite construction is also naturally resistant to corrosion, making them an ideal choice for use in all weather conditions.

• Outer Diameter (OD): 73.0mm
• Inner Diameter (ID): 64.1mm
• Material: Heat-Resistant Plastic
• Quantity: Sold as a pair (2 rings)
• Manufacturer Part Number: 1SB2BB73641

Ensure a precise, vibration-free fitment for your aftermarket wheels with SSR Plastic Hubcentric Rings. These rings are designed to bridge the gap between the 73.0mm center bore of your SSR wheels and the 56.1mm hub diameter of your vehicle. By centering the wheel perfectly on the hub, they eliminate steering wheel shimmy and reduce stress on the wheel studs.

• Outer Diameter: 73.0mm
• Inner Diameter: 56.1mm
• Material: Heat-resistant composite plastic
• Quantity: Sold as a pair (2 rings)
• Manufacturer Part Number: 1SB2BB73561

Proper hubcentric rings are essential for maintaining wheel balance and ride quality. These rings snap into the wheel bore and stay in place during installation, ensuring the wheel is perfectly concentric with the axle for every mile.

The SSR GTX04 is a high-performance 10-spoke wheel engineered for drivers who prioritize weight reduction and structural rigidity. Utilizing SSR’s Flow Forming Technology (FFT), the GTX04 achieves a strength-to-weight ratio comparable to forged wheels, making it an ideal choice for both track enthusiasts and spirited street driving. Its slim spoke profile is specifically designed to maximize brake cooling and provide ample clearance for large aftermarket calipers.

This 19x9.5 specification offers a wide footprint for improved lateral grip and stability. Finished in a race-inspired Dark Gunmetal, the GTX04 combines a premium aesthetic with the durability needed to withstand the heat and stress of performance use.

• Series: GTX04
• Part Number: XF19950+3805GDG
• Diameter: 19 inches
• Width: 9.5 inches
• Bolt Pattern: 5x114.3
• Offset: +38mm
• Finish: Dark Gunmetal
• Construction: Flow Formed (FFT)

The SSR GTX04 is a lightweight, performance-focused wheel engineered for drivers who prioritize weight reduction and structural rigidity. Utilizing advanced flow-forming technology, this wheel offers the strength required for track use while maintaining the aesthetics of a premium street wheel. Its slim, multi-spoke design is not just for looks; it provides excellent heat dissipation and maximum clearance for high-performance big brake kits (BBK).

• Model: GTX04
• Size: 18x9.5
• Bolt Pattern: 5x114.3
• Offset: +40mm
• Finish: Dark Gunmetal
• Construction: Flow-formed for high strength and low rotational mass
• Manufacturer Part Number: XF18950+4005GDG

Whether you are shaving seconds off your lap times or upgrading your car's stance, the GTX04 delivers the precision engineering SSR is known for. Please note that center caps and lug nuts are sold separately.

The SSR GTX04 is a high-performance wheel engineered for enthusiasts seeking a balance of lightweight construction and structural rigidity. Utilizing advanced flow-forming technology, this wheel reduces unsprung weight to improve handling response and braking performance without compromising the durability required for spirited driving or track use.

• Series: GTX04
• Size: 18x9.5
• Bolt Pattern: 5x114.3
• Offset: +22mm
• Finish: Dark Gunmetal
• Manufacturer Part Number: XF18950+2205GDG

The Dark Gunmetal finish provides a sleek, aggressive aesthetic while the slim spoke profile is designed to maximize brake clearance and cooling airflow. This wheel is a functional upgrade for performance-oriented builds looking for genuine racing heritage and weight savings.

The SSR GTX03 is a lightweight, high-performance wheel engineered for enthusiasts who demand a balance of strength and reduced rotational mass. Utilizing Flow Forming Technology (FFT), this wheel provides the structural integrity required for aggressive street and track use while maintaining a slim, 10-spoke profile for optimized brake clearance and cooling.

• Series: GTX03
• Size: 18x9.5
• Bolt Pattern (PCD): 5x114.3
• Offset: +38mm
• Finish: Gun Metallic
• Construction: Flow Formed (FFT)
• Part Number: XC18950+3805GGM

Each wheel is designed to meet strict JWL and VIA standards, ensuring reliability under load. The Gun Metallic finish offers a durable, high-end aesthetic that complements a wide range of performance vehicle builds.

The SSR GTX03 is a high-performance 10-spoke wheel engineered for drivers who prioritize both structural rigidity and weight reduction. Utilizing Flow Forming Technology (FFT-R), SSR achieves a thinner rim thickness without sacrificing strength, effectively lowering unsprung weight for improved suspension response and acceleration. This wheel features a sleek Black Graphite finish and is designed with slim spokes to maximize cooling airflow to the braking system.

• Diameter: 18 inches
• Width: 9.5 inches
• Bolt Pattern (PCD): 5x100
• Offset: +38mm
• Finish: Black Graphite
• Construction: Flow Formed (FFT-R)
• Manufacturer Part Number: XC18950+3805CGM

The SSR GTX01 is a high-performance 10-spoke wheel engineered for enthusiasts who demand a balance of weight reduction and structural integrity. Utilizing SSR’s proprietary Flow Forming Technology (FFT), the rim barrel is shaped under high pressure while spinning, resulting in a grain structure that is denser and stronger than standard casting. This process reduces unsprung mass, directly improving your vehicle's acceleration, braking, and suspension articulation.

This wheel features a refined Flat Black finish that provides a sleek, aggressive look while resisting the rigors of spirited driving. With a 19x9.5-inch profile and a +38mm offset, it is designed to offer a flush fitment on a variety of performance platforms utilizing the 5x120 bolt pattern.

• Series: GTX01
• Size: 19x9.5
• Bolt Pattern (PCD): 5x120
• Offset: +38mm
• Finish: Flat Black
• Construction: Flow Formed (FFT)
• Manufacturer Part Number: XA19950+3805HMB

The SSR GTX01 is a performance-oriented 10-spoke wheel engineered for drivers who demand strength and weight efficiency. Manufactured using SSR's Flow Fine Technology (FFT), this wheel features a flow-formed barrel that provides the structural integrity of a forged wheel with the cost-effectiveness of a cast design. This process reduces unsprung mass, improving suspension response and overall vehicle handling.

• Part Number: XA19950+3805HDK
• Diameter: 19 inches
• Width: 9.5 inches
• Bolt Pattern: 5x120
• Offset: +38mm
• Finish: Dark Silver
• Construction: Flow Formed (FFT)

Please note: This is a Special Order (S/O) item. Due to the custom nature of this product, orders cannot be canceled once they have been processed.

The SSR GTX01 is a lightweight, performance-focused wheel engineered for drivers who demand both strength and weight efficiency. Utilizing Flow Forming Technology (FFT), SSR creates a wheel with a high level of metal density, providing the durability required for track use while minimizing unsprung mass to improve handling and acceleration.

This 18x9.5 wheel features a slim 10-spoke design that optimizes weight distribution and provides ample clearance for large brake kits. Finished in a premium Dark Silver, the GTX01 delivers a technical, motorsport-inspired aesthetic to your vehicle.

• Series: GTX01
• Diameter: 18 inches
• Width: 9.5 inches
• Bolt Pattern (PCD): 5x114.3
• Offset: +40mm
• Finish: Dark Silver
• Construction: Flow Formed (FFT)
• Manufacturer Part Number: XA18950+4005GDK

Each wheel is sold individually. Center caps are typically sold separately by SSR for the GTX series.

Upgrade your vehicle's stance and performance with the SSR GTX01, a lightweight racing-inspired wheel designed for strength and weight reduction. This 18x9.5 wheel features a 10-spoke design and a durable Flat Black finish, making it a functional upgrade for both track and street applications. Fits select Mitsubishi Lancer Evolution 8, 9, X, Infiniti G35, and Nissan 350Z and 370Z models.

• Series: GTX01
• Size: 18x9.5
• Bolt Pattern: 5x114.3
• Offset: +22mm
• Finish: Flat Black
• Manufacturer Part Number: XA18950+2205GMB

Designed to clear many performance brake kits, the GTX01 provides a concave profile that enhances the aggressive look of your chassis while maintaining the structural integrity required for high-performance driving.

Fits select 2003-2015 Mitsubishi Lancer Evolution VIII/IX/X, Infiniti G35, and Nissan 350Z/370Z.

The SSR GTX01 is a performance-oriented wheel utilizing SSR’s Flow Forming Technology (FFT) to achieve a lightweight yet rigid barrel. This split five-spoke design is engineered to reduce unsprung weight, improving handling and braking response for track-focused and aggressive street builds. The Dark Silver finish provides a durable, sleek aesthetic that complements the aggressive offsets found on modern Japanese performance chassis.

• Model: SSR GTX01
• Size: 18x9.5
• Bolt Pattern: 5x114.3
• Offset: +22mm
• Finish: Dark Silver
• Construction: Flow Formed (FFT)
• Manufacturer Part Number: XA18950+2205GDK

The SSR GTX01 is a high-performance, flow-formed wheel engineered to reduce unsprung weight while maintaining the structural rigidity required for aggressive street and track use. Inspired by Super GT racing, the GTX01 utilizes a slim 10-spoke design that optimizes weight distribution and provides ample clearance for larger brake calipers while assisting in heat dissipation.

This 18x8.5 model features a Dark Silver finish and is constructed using SSR’s Flow-Forming Technology (FFT), which results in a barrel that is both thinner and stronger than standard cast wheels. Designed with a 5x114.3 bolt pattern and a +44mm offset, it offers a precise fitment for a wide range of sport compacts and sedans.

• Wheel Series: GTX01
• Size: 18x8.5
• Bolt Pattern: 5x114.3
• Offset: +44mm
• Finish: Dark Silver
• Manufacturing Process: Flow-Formed (FFT)
• Manufacturer Part Number: XA18850+4405GDK

Fits select Mitsubishi Evolution X, Infiniti G35, and Nissan 350Z / 370Z models.

The SSR GTX01 is a high-performance wheel engineered using Flow Forming Technology (FFT) to achieve an optimal balance of strength, rigidity, and lightweight performance. Drawing inspiration from Super GT racing, the GTX01 features a sharp ten-spoke design that maximizes brake caliper clearance while reducing unsprung weight to improve handling response and acceleration.

This 18x10.5 wheel features a premium Dark Silver finish and a +15mm offset, providing an aggressive stance and wider footprint for track-focused or widebody applications. Built to exceed JWL and VIA standards, the GTX01 provides authentic JDM engineering for enthusiasts who refuse to compromise on wheel integrity.

• Model: GTX01
• Size: 18x10.5
• Bolt Pattern: 5x114.3
• Offset: +15mm
• Finish: Dark Silver
• Construction: Flow Formed (FFT)
• Manufacturer Part Number: XA18105+1505GDK

The SSR GTX01 is a high-performance 10-spoke wheel engineered to minimize unsprung weight without sacrificing structural rigidity. Using advanced Flow Forming Technology (FFT), SSR produces a barrel with a grain structure similar to a forged wheel, resulting in a lighter and stronger component than traditional casting. The thin, tapered spokes are designed not only for aesthetics but also to facilitate heat dissipation and provide ample clearance for high-performance brake calipers.

This 17x9-inch wheel features a Flat Black finish for a stealthy, race-inspired look that remains durable under track and street conditions. With a +38mm offset and the common 5x114.3 bolt pattern, it is a versatile choice for enthusiasts seeking to improve handling and vehicle stance.

• Model: GTX01
• Size: 17x9
• Bolt Pattern: 5x114.3
• Offset: +38mm
• Construction: Flow Formed (FFT)
• Color: Flat Black
• Manufacturer Part Number: XA17900+3805GMB

The SSR GTX01 is a high-performance wheel engineered for drivers who demand a balance of lightweight agility and track-ready durability. Utilizing advanced flow-forming technology, the GTX01 reduces unsprung mass to improve suspension response, acceleration, and braking performance while maintaining the structural integrity required for spirited driving.

This wheel features a sleek multi-spoke design finished in Dark Silver, offering a technical aesthetic that complements modern performance vehicles. The 17x9 size with a +38mm offset provides an aggressive footprint for enhanced mechanical grip and a flush fitment on many popular 5x100 platforms.

• Series: GTX01
• Size: 17x9
• Bolt Pattern: 5x100
• Offset: +38mm
• Finish: Dark Silver
• Construction: Flow-Formed Aluminum
• Manufacturer Part Number: XA17900+3805CDK

The SSR Professor SP4 is a premium three-piece wheel engineered for automotive enthusiasts who demand a balance of weight reduction, structural rigidity, and timeless aesthetics. This 18x10.5 wheel features the Medium (MD) disk profile, which is designed to provide necessary brake caliper clearance while maximizing the depth of the outer rim lip. Finished in a clean BP White, the classic five-spoke design complements a wide range of performance builds.

• Three-piece construction utilizes Heat Treatment Manufacture (HTM) for a thinner, lighter, and stronger inner barrel.
• MD (Medium Disk) profile offers an optimized balance between spoke curvature and lip depth.
• Classic 5-spoke design with a stepped lip for a deep-dish appearance.
• Precision-engineered 5x114.3 bolt pattern for high-performance applications.

Note: This is a special order product. Due to the custom nature of SSR wheels, orders for this item cannot be cancelled or returned once processed.

• Brand: SSR
• Series: Professor SP4
• Part Number: P418105-29M5GW0
• Size: 18x10.5
• Offset: -29mm
• Disk Type: MD (Medium)
• Bolt Pattern: 5x114.3
• Color: BP White

The SSR Professor SP4 is a premium three-piece modular wheel designed for enthusiasts who demand precision engineering and classic 5-spoke aesthetics. This specific 18x10.5 wheel features a -21mm offset and the NR (Normal) disk profile, which is engineered to provide a balance between brake clearance and deep-dish lip depth. Finished in Bright Port (BP) White, this wheel offers a distinct, high-end look for performance applications.

As a three-piece wheel, the Professor SP4 is constructed with SSR's HTM (Heat Treatment Manufacture) technology, resulting in a lighter and stronger outer rim compared to traditional casting. This ensures the wheel can handle the stresses of spirited driving while maintaining its structural integrity.

• Manufacturer Part Number: P418105-21L5GW0
• Diameter: 18 inches
• Width: 10.5 inches
• Offset: -21mm
• Disk Type: NR (Normal Disk)
• Bolt Pattern: 5x114.3
• Color: BP White (Bright Port White)
• Construction: 3-Piece Modular

Note: This is a SPECIAL ORDER item. Orders for this product cannot be canceled or returned once placed.

The SSR Type-C Forged wheel is engineered for enthusiasts who demand the ultimate balance of weight reduction and structural integrity. Utilizing a specialized forging process, this wheel offers the high-strength characteristics required for rigorous track use while minimizing unsprung mass to improve acceleration, braking response, and handling dynamics.

This 18x9.5 wheel features a +22mm offset and a 5x114.3 bolt pattern, providing a wide footprint and aggressive fitment for performance applications. The Racing Bronze finish provides a durable, motorsport-inspired aesthetic that stands up to the heat and debris of spirited driving.

• Series: Type-C
• Construction: Forged Aluminum
• Size: 18x9.5
• Offset: +22mm
• Bolt Pattern: 5x114.3
• Finish: Racing Bronze
• MPN: F318950+2205GMC