Fits 1987-2006 Jeep Wrangler YJ and TJ models, including Sport, Sahara, Rubicon, and Unlimited. This Rugged Ridge Bug Deflector provides essential protection for your vehicle's leading hood edge and windshield against stone chips, road debris, and insects. By altering the airflow, it helps sweep bugs and small particles over the roof rather than into your glass.

Constructed from durable, shatter-resistant smoked acrylic, this deflector is built to withstand trail debris and highway speeds without cracking or fading. The dark smoked finish complements any paint color while providing a sleek, low-profile appearance. Installation is secure, utilizing a combination of high-bond double-sided tape and underhood screws to ensure the guard remains stable even in high-wind conditions.

• Fits Jeep Wrangler models from 1987 to 2006 (YJ/TJ)
• Manufactured from shatter-resistant smoked acrylic
• Installation uses automotive-grade tape and underhood screws
• Minor drilling required for a permanent, secure fit
• Manufacturer Part Number: 11350.01
• Backed by a Limited 5-Year Warranty

Fits select 1991-2006 Jeep Wrangler models (SE, Sport, Sahara, Rubicon, Unlimited, and variants).

Maintain precise steering control and eliminate front-end play with this Rugged Ridge heavy-duty replacement tie rod end. This service part is engineered specifically for use with Rugged Ridge heavy-duty tie rods and drag links, providing the durability needed for oversized tires and off-road stress. It features a 7/8-inch shank with right-hand threading to ensure a direct fit and easy adjustment within your steering linkage.

• Manufacturer Part Number: 18043.26
• Size: 7/8-inch diameter
• Thread: Right-hand thread
• Compatibility: Designed for use with Rugged Ridge kits 18050.82 and 18050.83
• Warranty: Limited 5-Year Warranty

Fits 2007-2018 Jeep Wrangler and Wrangler JK (3.6L / 3.8L).

Protect your engine during deep water crossings and dusty trail rides with the Rugged Ridge XHD Modular Snorkel System. Unlike traditional one-piece snorkels, this modular design relocates the factory air intake to a safer, higher position to significantly reduce the risk of hydro-locking and filter clogging. The system is engineered to maintain full vehicle functionality, allowing you to fold the windshield and remove doors without interference. It is also compatible with Rugged Ridge dual battery trays and windshield light bars (low mount only).

This kit replaces the factory lower air cleaner box, requiring only minor fender modification rather than the extensive cutting needed for competitive kits. The included Pre-filter Low Mount draws cool air from outside the engine bay at the cowl level. For maximum clearance, the design is interchangeable with an optional High Mount Ram intake. Integrated manual drain valves ensure water is channeled away before it can enter the intake tract.

• Relocates intake to prevent hydro-locking and reduce dust intake
• Modular design includes Pre-filter Low Mount
• Mandrel-bent aluminum intake tubes for maximum airflow
• High-temp silicone connection hoses and thermoformed plastic construction
• Retains compatibility with folding windshields and removable doors
• Built-in manual water drain valves
• Manufacturer Part Number: 17756.22
• U.S. Patents: D687,071 and D687,072

The Rugged Ridge Trekker Series Wired Remote Control provides reliable, tactile operation for recovery tasks. Designed as a direct replacement or a backup for Trekker Series electric winches, this remote allows you to operate recovery equipment safely from the driver's seat or at a distance from the winching path.

• Fits all Rugged Ridge Trekker Series winches, including 10,000 lb and 12,500 lb models.
• Generous 12-foot cable length ensures safe operation away from recovery lines and rigging.
• Rugged all-weather construction is built to withstand harsh trail conditions and exposure.
• Direct plug-and-play connectivity for immediate winch control.
• Manufacturer Part Number: 15103.37
• Includes a 5-year limited warranty.

The Rugged Ridge Heavy Duty Tri-Fold Recovery Shovel (MPN 15104.42) is a versatile and essential tool for off-road recovery, trail maintenance, and emergency vehicle kits. Engineered for maximum portability without sacrificing durability, this shovel features a tri-fold mechanism that allows it to collapse from an operational length of 23 inches down to just 9 inches, making it easy to stow in tight cargo areas or tool bags.

Built with a heavy-duty steel body and finished in a corrosion-resistant black powder coat, the shovel head is equipped with dual serrated edges for cutting through roots or breaking up hard-packed terrain. Whether you are clearing a path, digging out a bogged tire, or preparing a campsite, this tool provides the strength and leverage required for demanding outdoor tasks. Each unit includes a durable storage case to protect the tool and keep your vehicle interior clean after use.

• Operational Length: 23 inches
• Stowed Length: 9 inches
• Construction: Heavy-duty black powder-coated steel
• Features: Dual serrated edges for digging and cutting
• Included Components: Shovel and durable storage case
• Manufacturer Part Number: 15104.42
• Warranty: Limited 5-Year Warranty

Fits 1976-1995 Jeep CJ7 and Wrangler models. This Rugged Ridge Deluxe Carpet Kit provides a comprehensive solution for refreshing a worn or weathered interior with a factory-style fit and finish.

Constructed from tufted polypropylene, this 6-piece kit is engineered for rugged durability and high resistance to chemical solvents, stains, and mildew. Each piece features electronically surged edges to prevent unraveling, ensuring long-term performance in open-top environments. Beyond aesthetics, the dense polypropylene material provides natural sound-deadening properties to reduce interior road noise and heat transfer.

• Complete 6-piece kit for full interior coverage
• Tufted polypropylene construction for maximum durability
• Electronically surged edges prevent fraying and unraveling
• Inherent stain, chemical, and mildew resistance
• Includes spray adhesive for a secure, permanent installation
• Black finish matches or complements OE interior trim
• Manufacturer Part Number: 13695.01

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models. This direct-fit wiper motor cover kit from Rugged Ridge is designed to replace or enhance your existing OE-style cover with a premium, corrosion-resistant alternative.

Constructed from prime 304 stainless steel and polished to a mirror finish, this kit provides long-lasting durability and resistance against rust. Unlike factory plastic or painted covers, this stainless steel component is built to withstand the elements, making it an ideal choice for open-top Jeep restorations and builds. The kit includes all necessary stainless steel hardware to ensure a uniform appearance upon installation.

• Material: 304 Stainless Steel
• Finish: Polished Mirror
• Installation: Direct Fit, OE Style
• Hardware: Stainless steel screws included
• Manufacturer Part Number: 11122.02
• Warranty: Limited 5-Year Warranty

Fits 2007-2010 Jeep Wrangler and Wrangler Unlimited (JK).

Protect your interior from accelerated wear with the Rugged Ridge All-Terrain Center Console Cover. Unlike factory cloth or leather surfaces that are prone to tearing and staining, this heavy-duty cover is molded from durable polyurethane foam to create a resilient barrier. It is specifically designed to withstand scratches, rips, and damage from harsh pet claws while enhancing your cabin with Rugged Ridge's signature tire-tread styling. The cover installs securely in seconds using the supplied automotive-grade adhesive tape, ensuring a factory-fit appearance that stays in place.

• Manufacturer Part Number: 13107.40
• Material: High-density polyurethane foam
• Finish: Black with unique tread design
• Installation: Secure automotive-grade adhesive tape
• Protects against scratches, stains, and pet damage

Fits 1984-2001 Jeep Cherokee XJ models including Sport, SE, Limited, and Laredo.

Protect your Jeep's rear cargo area from the elements with the Rugged Ridge Cargo Liner. Engineered for a precise, custom fit, this liner follows every contour of the XJ interior to provide edge-to-edge coverage. The high perimeter wall is designed to contain spills, melted snow, and mud, preventing damage to the factory carpet. Constructed from durable, OE-quality thermoplastic, this 1-piece liner is built to handle the mechanical stress of daily use and off-road gear.

• High perimeter wall captures liquids and debris for maximum interior protection
• Reinforced rolled edges provide additional structural strength
• Nibbed underside prevents the liner from shifting during transit
• Injection-molded thermoplastic construction is chemical and UV resistant
• Custom-fit design ensures no gaps in coverage
• Manufacturer Part Number: 12975.29
• Backed by a Limited Lifetime Warranty

Fits 2020-2025 Jeep Gladiator (JT) models across all trims including Sport, Rubicon, Overland, and Mojave.

Rugged Ridge Max-Terrain Fender Flares provide the ultimate combination of classic flat-fender styling and modern functionality. Inspired by early Jeep models, these flares are engineered to mount higher on the body than factory units, providing significantly more tire clearance for maximum suspension travel during off-road articulation. The injection-molded thermoplastic construction offers superior flexibility and impact resistance, while the UV-protected material prevents chalking over time.

These flares feature a distinct dual-textured finish that complements factory trim but can also be prepped and painted for a color-matched look. For added safety and style, they include integrated two-color DRL (Daytime Running Light) tubes cradled within the front support braces. The rear mating surfaces are specifically contoured to prevent stones and trail debris from becoming trapped against your painted body panels. Installation is a straightforward, no-drill process using the included hardware.

• Injection-molded thermoplastic construction for impact resistance and flexibility
• High-clearance design for increased tire travel and larger wheel fitments
• Integrated two-color DRL tubes for improved visibility
• UV-protected dual-textured black finish
• Contoured rear edges to protect paint from debris trapping
• No-drill installation using factory mounting points
• Manufacturer Part Number: 11640.52
• Limited 5-Year Warranty

Fits 2007-2018 Jeep Wrangler JK (2-Door) models including Rubicon, Sahara, Sport, and X.

These Rugged Ridge 3-inch round side steps provide a reliable stepping surface and enhanced side protection for your JK. Constructed from heavy-duty 0.07-inch wall steel tubing, these steps undergo a dual-stage finishing process. Each rail is E-coated to bond a protective layer to the metal, followed by a textured black powder coat for superior chip and rust resistance.

Installation is straightforward using the included 3/16-inch powder-coated steel brackets, designed for a custom fit that ensures flex-free use. Each step features a pre-installed, UV-treated non-slip step pad secured with a 5-pin mounting system, eliminating exposed metal to prevent corrosion over time.

• Diameter: 3-inch round tubing
• Material: 0.07-inch wall steel
• Finish: E-coated and Textured Black Powder Coat
• Hardware: 3/16-inch steel mounting brackets included
• Step Pad: UV-resistant non-slip pads with 5-pin mounting
• Manufacturer Part Number: 11591.05
• Warranty: Limited 5-Year Warranty

Fits select 1988-2006 Jeep Wrangler models equipped with the Rugged Ridge 18676.60 Slip Yoke Eliminator (SYE) kit.

Restore the integrity of your driveline with this heavy-duty steel replacement yoke from Rugged Ridge. Specifically engineered as a service part for the NP231 18676.60 SYE kit, this yoke replaces a worn or damaged unit to maintain proper u-joint seating and torque transfer. Manufactured by Omix-ADA to precise tolerances, it ensures a direct-fit installation that matches the original kit specifications for reliable off-road performance.

• Exclusive Compatibility: Designed specifically for use with Rugged Ridge SYE kit part number 18676.60 only
• Durable Construction: Forged from high-strength steel to withstand the stresses of lifted suspension geometries
• Precision Engineering: Built to original Omix-ADA specifications for a reliable, direct replacement
• Manufacturer Part Number: 18676.61
• Warranty: Limited 5-year manufacturer warranty

Fits 1984-2006 Jeep Cherokee (XJ), Grand Cherokee (ZJ), and Wrangler (TJ/LJ). This Rugged Ridge Heavy Duty Steering Kit is a bolt-on solution designed to prevent bent tie rods and steering failure during off-road use with larger tire setups. By utilizing true DOM (Drawn Over Mandrel) tubing with no seams or welds, this kit provides "one ton" strength using 1-1/4 inch OD steel with a 1/4 inch wall thickness.

• Robust Construction: 1-1/4 inch OD cold-rolled steel tubing with a 1/4 inch wall thickness for superior rigidity.
• Heavy-Duty Components: Includes 7/8 inch rod ends with standard tapered ends to fit factory steering knuckles without modification.
• Complete Package: Includes the drag link, tie rod, tie rod ends, and a steering damper to improve handling and reduce vibration.
• Fitment Notes: Recommended for vehicles with 2 to 4 inches of suspension lift. Not compatible with factory Rubicon wheels, small OEM steel wheels, or wheels with deep backspacing.
• Manufacturer Part Number: 18050.88

Fits select 1976-1995 Jeep CJ7, Scrambler, and Wrangler YJ models.

Protect your Jeep's interior from the elements with the Rugged Ridge Rear Floor Liner. This one-piece liner is precision-contoured to the vehicle floor, providing a secure fit that keeps your cabin looking factory-fresh. Engineered for the rigors of daily use and trail debris, it is injection-molded from durable OE-quality thermoplastic material that resists chemicals and wear.

The patented Chevron-shape Deep Tread Technology (Patent Nos. 8,163,369; D627,285; 2,699,641) effectively channels liquid, mud, and snow away from your shoes to keep them dry. High perimeter walls and reinforced rolled edges provide maximum containment for spills, while the nibbed bottom ensures the liner stays firmly in place during transit.

• Precision-contoured design for a secure, vehicle-specific fit
• Durable thermoplastic construction resists daily abuse
• Patented Deep Tread Technology channels liquids away from footwear
• High perimeter wall captures spills, water, and debris
• Nibbed underside prevents liner shifting
• 1-piece rear coverage
• Manufacturer Part Number: 12950.22
• Backed by a Limited Lifetime Warranty

Fits select 2007-2018 Jeep Wrangler and Wrangler JK models including Sport, Sahara, Rubicon, and Unlimited trims.

Keep your Jeep's footwells in factory condition with Rugged Ridge All Terrain Floor Liners. These liners are injection-molded from a durable, OE-quality thermoplastic material designed to withstand the daily abuse of mud, sand, and snow. Unlike flat universal mats, these are precisely contoured to the specific floor layout of the 2007-2018 JK chassis for a secure fit that won't slide around underfoot. The patented chevron-style deep tread technology channels liquid and debris away from your shoes, while the high perimeter walls contain even large spills to protect your carpet.

Each liner is engineered with rolled reinforced edges for added strength and features a nibbed bottom to ensure the mats stay firmly in place. They utilize factory floor hook attachments where applicable for an extra layer of safety. This front-row pair provides rugged, reliable protection for both driver and passenger sides.

• Material: Durable OE-quality thermoplastic
• Quantity: 2-Piece Front Set
• Tread Design: Patented chevron deep tread technology
• Retention: Nibbed bottoms and floor hook compatibility
• Safety: High perimeter walls and reinforced rolled edges
• Patents: 8,163,369; D627,285; 2,699,641
• Manufacturer Part Number: 12920.02

The Rugged Ridge Spartacus HD Tire Carrier System provides the essential strength and stability required for mounting oversized wheel and tire combinations on 1997-2006 Jeep Wrangler TJ models. Engineered to manage the amplified forces and vibrations of off-road driving, this system replaces factory hinges to prevent tailgate sag and wear.

This kit features a precision die-cast aluminum hinge casting for maximum strength without the weight penalty of steel, paired with forged steel hinge brackets and hardened steel pins for superior load capacity. The one-piece design maintains convenient one-handed access to the cargo area while rigidly linking the adjustable wheel mount to the reinforced section of the rear quarter panel. The mount includes depth and tilt adjustability to accommodate various tire offsets and diameters up to 37 inches.

• Fits 1997-2006 Jeep Wrangler TJ (SE, Sport, Sahara, Rubicon, X, and Unlimited)
• Construction: Die-cast aluminum hinge casting with forged steel brackets and hardened steel pins
• Tire Capacity: Rated for combinations up to 37 inches
• Durability: Tested to MIL-STD-810 standards for extended off-road vibration and duration
• Adjustability: Built-in depth and tilt adjustment for wide and large diameter tires
• Installation: Direct bolt-on design with no drilling required
• Compatibility: Works with OE and most aftermarket rear bumpers
• Includes: HD tire carrier system and adjustable third brake light bracket
• Manufacturer Part Number: 11546.60

Fits 1997-2006 Jeep Wrangler (TJ) including Sahara, Sport, SE, X, Rubicon, and Unlimited models.

Eliminate the hood flutter common on Jeep Wranglers with these Rugged Ridge Aluminum Hood Catches. Over time, original equipment rubber latches degrade, stretch, and fail, causing the hood to bounce at highway speeds. These adjustable hood catches are constructed from high-strength aluminum for a rock-solid hold and feature a proportional design that complements your vehicle's factory styling.

Finished in a durable textured black powder coat, these latches are designed for a direct-fit installation, replacing your worn factory hardware without modification. Each set is engineered to provide a secure, stable closure while offering the adjustability needed to maintain proper tension on the hood seal.

• Manufacturer Part Number: 11210.18
• Material: Durable aluminum construction
• Finish: Textured Black powder coat
• Functional Design: Reduces or eliminates hood flutter at speed
• Adjustable: Allows for precise tensioning and fitment
• Installation: Direct bolt-on replacement for factory hardware
• Warranty: Limited 5-Year Warranty

Fits 1976-1986 Jeep CJ7 and 1987-1995 Jeep Wrangler YJ.

Rugged Ridge floor liners provide comprehensive protection for your vehicle's cabin floor, engineered to maintain a factory-fresh appearance under the toughest conditions. Each liner is injection-molded from durable, OE-quality thermoplastic for a precise fit that contours to the specific floor geometry of the CJ and YJ chassis. These liners feature patented Deep Tread Technology with a Chevron-shape pattern that channels liquids and debris away from your footwear to keep your interior pristine.

Built to withstand daily abuse, these liners incorporate high perimeter walls to contain spills, while reinforced rolled edges provide additional structural strength. The nibbed bottoms ensure the liners stay securely anchored to the carpet during entry and exit. This two-piece front set is a direct-fit solution for preserving the floorboards of your classic Jeep.

• Part Number: DMC-12920.22
• Material: Durable OE-Quality Thermoplastic
• Technology: Patented Chevron Deep Tread (Patents 8,163,369, D627,285, 2,699,641)
• Protection: High perimeter walls with rolled reinforced edges
• Fitment: Nibbed bottoms for secure, non-slip placement
• Quantity: 2-Piece Front Set
• Warranty: Limited Lifetime Warranty

Fits select 1946-1995 Jeep CJ, Wrangler, Scrambler, and Willys models.

Restore your vehicle's factory aesthetics and radio reception with the Rugged Ridge Chrome Antenna Mast. Designed as a direct OE-style replacement, this 32.5-inch mast features a high-luster chrome finish that replicates the original equipment for a period-correct appearance. Whether you are finishing a restoration or replacing a snapped factory mast, this component provides the precise fitment needed for vintage and classic Jeep applications.

Installation is a simple bolt-on process, mounting directly to the factory antenna base without modifications. Constructed for durability in both daily driving and off-road environments, this mast is engineered to withstand the elements while maintaining a secure connection for clear signal transmission.

• Length: 32.5 Inches
• Finish: Chrome Plated
• Design: OE Style Replacement
• Installation: Direct Bolt-On
• Manufacturer Part Number: 17212.01
• Warranty: Limited 5-Year Warranty

Fits 2018-2026 Jeep Wrangler JL (including Rubicon, Sahara, Sport, Willys, and 4xe models).

The Rugged Ridge Elite Tail Light Guards provide a rugged layer of protection for the iconic JL tail lights without sacrificing their distinctive styling. Built from heavy-duty cast aluminum, these guards feature an ingenious two-piece design that encases the light housing to shield it from impact and trail debris. The guards are finished in a premium satin black powder coat to ensure long-lasting corrosion resistance and a factory-quality appearance.

Installation is clean and seamless, utilizing cleverly concealed hardware that makes the guards look like an original part of the vehicle's design. This kit includes all necessary 316 stainless steel hardware for a complete installation. Please note: these guards are designed to work with standard factory tail lights only.

• Manufacturer Part Number: 11226.13
• Material: High-quality cast aluminum shell
• Hardware: Rust-resistant 316 stainless steel
• Finish: Satin black powder coat
• Design: Patent-pending two-piece construction with concealed hardware
• Compatibility: Fits standard factory tail lights only
• Warranty: Limited 5-year warranty

Fits select 2018-2025 Jeep Wrangler (JK/JL) and Gladiator (JT) models.

The Rugged Ridge Venator Front Bumper (MPN: 11549.42) represents a technical departure from traditional flat-plate bumper designs. Engineered with stamped steel, the Venator utilizes sculpted contours and sweeping arches to provide a dominant form that complements the vehicle's factory aesthetics. This bumper isn't just about visual impact; it is a functional recovery hub designed for the rigors of off-road use, featuring an integrated winch plate and massive 1-inch thick recovery hooks.

• Stamped steel construction for durability and weight optimization
• Built-in winch plate compatible with most recovery winches
• 1-inch thick recovery hooks provide heavy-duty attachment points
• Octagonal pockets designed to house factory JL and JT fog lights
• Easy bolt-on installation into factory mounting locations
• Patented design features chiseled facets and radical arches
• Manufacturer Part Number: 11549.42

Fits 1984-2001 Jeep Cherokee (XJ) models including Base, Sport, SE, Limited, Country, Laredo, and Pioneer.

The Rugged Ridge Rear Floor Liner provides superior protection for your vehicle's cabin, shielding the carpet from spills, mud, and debris. This 1-piece liner is precision-engineered using OE-quality thermoplastic, a durable material designed to withstand the rigors of daily use. It features a patented chevron-shape Deep Tread Technology (Patent 8,163,369) that channels liquids away from your shoes and into a reservoir to keep your interior pristine.

• High perimeter wall and reinforced rolled edges for maximum spill containment
• Custom-contoured design for a precise, secure fitment
• Underside nibs ensure the liner remains firmly in place during use
• Deep Tread pattern channels liquid and debris away from your footwear
• Durable thermoplastic construction is easy to clean and stain-resistant
• Features the officially licensed Jeep logo
• MPN: DMC-12950.19
• Backed by a Limited Lifetime Warranty

Fits 1997-2006 Jeep Wrangler (SE, Sport, Sahara, Rubicon, Unlimited, and X).

Refresh your vehicle's front end with these Rugged Ridge black headlight bezels. Specifically engineered for a direct fit on 1997-2006 Jeep models, these bezels serve as a durable replacement for faded or damaged factory trim. Each unit is constructed from UV-treated material to resist the chalking and fading caused by sun exposure, ensuring a clean and consistent appearance over time. They are designed to attach directly to the factory mounting points using your Jeep's existing hardware for a hassle-free installation.

• Direct-fit replacement for 1997-2006 Jeep Wrangler headlight trim
• UV-treated finish prevents sun-induced fading and discoloration
• Installs to original factory mounting points for precise alignment
• Retains use of factory hardware; no drilling or modification required
• Sold as a pair (includes driver and passenger side bezels)
• Manufacturer Part Number: 12419.23
• Backed by a Limited 5-Year Warranty

Fits 2018-2021 Jeep Wrangler JK and Wrangler JL models including Rubicon, Sahara, Sport, and Unlimited trims.

Secure your emergency light source with these Rugged Ridge flashlight mounting brackets. Constructed from durable steel with a black finish, these brackets are designed to hold standard 1.5-inch diameter flashlights firmly in place, even during off-road use. The screw-mount design allows for installation on almost any flat surface, providing a permanent and accessible storage solution within your vehicle cabin.

These brackets are sold as a pair and require minor drilling for a secure installation. While tailored for Jeep Wrangler JK and JL interiors, the versatile design allows for custom mounting in various locations. Flashlight is not included.

• Fits flashlights with a 1.5-inch diameter
• Heavy-duty steel construction with a black finish
• Screw-mount design for secure attachment to flat surfaces
• Installation requires minor drilling
• Sold as a pair
• Manufacturer Part Number: 11238.06

Fits select 2007-2011 Jeep Wrangler and Wrangler Unlimited (Rubicon, Sahara, Sport, X, 70th Anniversary).

The Rugged Ridge Black Diamond Vinyl center console cover provides an immediate upgrade to your Jeep's interior comfort and durability. This armrest pad features a dense foam center for improved ergonomics during long drives, wrapped in a heavy-duty Black Diamond vinyl that complements factory interior textures. Engineered with robust steel brackets, this cover is designed to withstand daily wear while maintaining the full opening and closing functionality of the console lid.

Installation is straightforward and requires no drilling or removal of the OE lid. The unit bolts directly into the existing mounting points using factory screws, ensuring a secure, rattle-free fit. This is an essential upgrade for JK owners looking to replace a worn armrest or add a layer of protection to their center console.

• Material: Black Diamond Vinyl with dense foam core
• Construction: Durable steel mounting brackets
• Installation: Bolt-on using existing factory screws; no drilling required
• Compatibility: Allows for full opening and closing of console lid
• Manufacturer Part Number: 13107.35
• Warranty: Limited 5-Year Warranty

Fits 2007-2018 Jeep Wrangler and Wrangler Unlimited JK models including Rubicon, Sahara, Sport, and X trims.

The Rugged Ridge CB Radio and Antenna Mount Kit provides a comprehensive solution for mounting communication gear in your Jeep. This kit includes two specific brackets designed for durability and accessibility. The CB radio mount installs directly over the rearview mirror, keeping your radio within easy reach while utilizing a discrete mounting point. For the exterior, the antenna bracket installs on the factory spare tire carrier, positioned to the left of center for optimal clearance.

Both brackets are manufactured from heavy-duty steel and finished in a resilient black powder coat to resist corrosion and trail wear. This kit includes the necessary mounting hardware for a straightforward installation using factory mounting points.

• Includes over-mirror CB radio mount and spare tire carrier antenna mount
• Constructed from durable black powder-coated steel
• Maintains easy access to radio controls
• Utilizes factory mounting locations for simplified installation
• Includes all necessary mounting hardware
• Manufacturer Part Number: 11503.96

Fits select 1946-1995 Jeep Willys, CJ-2, CJ-3, CJ-5, CJ-6, CJ-7, Scrambler, and Wrangler.

Restore the look and function of your front end with the Rugged Ridge 304 Stainless Steel Hood Catch Kit. These catches are a direct-fit replacement for weathered or rusted factory latches, offering an OE-style design with significantly upgraded corrosion resistance. Manufactured from prime 304-grade stainless steel and polished to a mirror finish, this kit is built to withstand the elements without pitting or rusting over time.

• Prime 304 stainless steel construction for maximum rust protection
• Polished mirror finish provides a premium custom accent
• Complete set includes both hood catches and all necessary stainless steel mounting hardware
• Direct OE-style replacement requires no drilling on most applications
• Manufacturer Part Number: 11116.01
• Limited 5-Year Warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler.

The Rugged Ridge Heavy Duty Clutch Linkage Kit replaces the failure-prone factory L-bracket and retainer-clip rod with a robust spherical rod end design. This upgrade is essential for off-road use, as the factory linkage often binds during significant body and frame flex, preventing smooth gear changes. The spherical rod ends allow for a greater range of motion, ensuring consistent clutch engagement regardless of the terrain.

This kit is also designed to accommodate modified vehicles, providing enough length to function correctly with up to a 3-inch body lift. By installing manufacturer part number 16919.30, you eliminate the mechanical weak points in the OE linkage for more reliable shifting performance on the trail.

• Upgraded spherical rod design replaces original L-bracket and retainer-clips
• Prevents linkage binding during extreme chassis articulation and frame flex
• Compatible with stock height or up to 3-inch body lifts
• Includes all necessary hardware for installation
• Manufacturer Part Number: 16919.30

Fits 2018-2025 Jeep Wrangler JL models (including Rubicon, Sahara, Sport, and 4xe variants).

The Rugged Ridge Spartacus HD Tire Carrier Kit (MPN 11546.55) provides a robust mounting solution for oversized wheels and tires on your Wrangler JL. Engineered to support up to a 40-inch wheel and tire combination, this system reinforces the tailgate to prevent the sagging and structural fatigue often caused by heavier aftermarket rubber. By replacing the factory hinge with a precision-cast aluminum assembly and a heavy-duty steel wheel mount, you gain a massive increase in load capacity while maintaining convenient one-handed entry to the cargo area.

• Supports up to a 40-inch wheel/tire combination.
• Solid aluminum hinge casting for superior strength without excessive weight.
• Heavy-duty steel wheel mount ensures secure positioning.
• Compatible with both OE and most aftermarket rear bumpers.
• Vibration tested to hybrid SAE/MIL-Spec standards for off-road durability.
• Preserves factory one-handed tailgate operation.
• Manufacturer Part Number: 11546.55.

Fits select 2018-2026 Jeep Wrangler (JL/JLU) and 2020-2025 Jeep Gladiator (JT) models.

The Rugged Ridge All Terrain Door Entry Guard Kit is engineered to protect your Jeep’s door sills from the inevitable scuffs and scratches caused by frequent entry and exit. These guards provide a precision-contoured fit that covers more surface area than standard guards, being both longer and wider for maximum paint protection. Constructed from durable, black injection-molded thermoplastic, they feature a deep-ribbed all-terrain tread pattern that complements the rugged aesthetic of your vehicle, whether the doors are on or off.

Installation is straightforward and requires no drilling, utilizing the included automotive-grade acrylic adhesive foam tape for a secure, permanent bond to the factory door sill. This kit is a practical solution for preserving your vehicle's resale value while adding a custom off-road accent.

• Manufacturer Part Number: 11216.32
• Patent No. D627,285
• Material: Black injection-molded thermoplastic
• Installation: Automotive-grade acrylic adhesive tape
• Precision-contoured for an exact fit to the door rail
• Extended coverage design (longer and wider than OE)