Maintain the peak performance and filtration efficiency of your high-flow intake system with BMC Air Filter Regeneration Fluid. This 200ml aerosol spray is specifically formulated to recharge BMC cotton gauze filters after they have been cleaned and dried, restoring the oily barrier required to trap microscopic impurities without restricting airflow.

• Restores filtration capacity to factory specifications
• Aerosol applicator ensures even, consistent coverage across the pleats
• Essential for protecting the engine from fine dust and debris
• Specifically designed for BMC performance air filters
• Part Number: 200ml Aerosol Regeneration Fluid

For best results, apply after using BMC detergent wash and ensuring the filter media is completely dry. A light, uniform coat is all that is required to bring the filter back to optimal service condition.

The BMC Twin Air Universal Conical Filter is engineered for high-performance intake systems where maximum airflow and reliable filtration are critical. Featuring a durable polyurethane top and a 76mm (approximately 3-inch) inner diameter flange, this filter is a versatile solution for custom cold air intakes or as a direct replacement for existing conical filters in forced induction and naturally aspirated applications.

• Filter Type: Universal Conical
• Inlet Diameter (ID): 76mm
• Filter Height (H): 140mm
• Top Material: Polyurethane
• Media: Washable and reusable multi-layer cotton gauze
• Construction: Epoxy-coated alloy mesh for structural integrity

By utilizing a high-flow filtration media, this BMC filter reduces air resistance compared to standard paper elements, helping to improve engine efficiency and throttle response. The universal design allows for flexible installation, provided the 76mm flange and 140mm height clear your vehicle's engine bay or intake housing constraints.

Fits select 2022-2024 BMW X6 (G06/F96) and X7 (G07) 40i Mild Hybrid models.

The BMC FB01177 is a high-performance replacement air filter engineered to provide increased airflow and superior filtration over the restrictive factory paper element. Designed as a direct drop-in for the OE airbox, this filter features a multi-layered cotton gauze media soaked in a low-viscosity oil to capture impurities down to the micron level while reducing pressure drop across the intake system.

Constructed with a flexible, precision-molded rubber frame, the FB01177 ensures an airtight seal within the housing to prevent unfiltered air bypass. This washable and reusable filter is built for longevity, maintaining engine efficiency and protection for the life of the vehicle.

• Manufacturer Part Number: FB01177
• Increases airflow for improved throttle response and engine efficiency
• Multi-layered oiled cotton gauze media provides high filtration capacity
• Precision-molded for an exact fit in the factory G07, G06, and F96 airbox
• Replaces standard paper filters with a durable, washable design

Fits 2007-2012 Audi A4 (8K/B8) models equipped with the 2.7 TDI engine.

This BMC Replacement Cylindrical Air Filter (FB533/08-01) provides superior airflow and filtration efficiency compared to standard paper filters. Designed as a direct drop-in replacement for the factory airbox, this high-performance filter utilizes multi-layered cotton gauze treated with low-viscosity oil to capture impurities down to 7 microns while minimizing pressure drop.

• Precision Fit: Engineered specifically for the 8K/B8 chassis Audi A4 2.7 TDI for a perfect airbox seal.
• Advanced Media: Features epoxy-coated alloy mesh and oil-soaked cotton for maximum durability and filtration performance.
• Washable & Reusable: Can be cleaned and recharged, eliminating the need for frequent disposable filter replacements.
• Enhanced Efficiency: Optimizes engine response and intake efficiency by allowing a higher volume of clean air into the system.
• Manufacturer Part Number: FB533/08-01

Fits 1999-2006 Mercedes-Benz CL 500. Note: This vehicle requires a quantity of two (2) filters for a complete replacement.

The BMC FB262/01 replacement panel air filter is a high-performance drop-in upgrade designed to replace the restrictive factory paper element. Engineered for increased airflow and superior filtration, this filter uses a multi-layered cotton gauze media soaked in low-viscosity oil to trap contaminants while allowing a higher volume of air to reach the engine. The filter media is protected by an epoxy-coated aluminum alloy mesh, providing structural integrity and resistance against fuel vapors and atmospheric oxidation.

• Direct replacement for the OE panel filter in the factory airbox
• Washable and reusable using BMC cleaning and oiling kits
• High-flow cotton gauze construction improves induction efficiency
• Epoxy-coated alloy mesh prevents corrosion and maintains filter shape
• Manufacturer Part Number: FB262/01

Fits 2015-Up BMW 1 Series (F20/F21) models equipped with the 114d engine.

The BMC FB702/20 is a high-performance replacement panel air filter designed to drop directly into your vehicle's factory airbox. Constructed from multi-layered cotton gauze soaked in low-viscosity oil, this filter provides superior airflow compared to traditional paper elements while maintaining high filtration efficiency for engine protection. The filter media is supported by an epoxy-coated alloy mesh that resists fuel vapors and oxidation.

• Direct drop-in replacement for the factory air filter
• Washable and reusable cotton gauze filtration media
• Epoxy-coated alloy mesh for structural integrity
• Improves intake airflow without compromising filtration
• Manufacturer Part Number: FB702/20

The BMC Carbon Dynamic Airbox (CDA) is a high-performance universal filtration system designed for engines with a displacement greater than 1600cc. Unlike standard factory air boxes or open-element filters, the CDA utilizes a genuine carbon fiber housing to insulate the intake air from engine bay heat soak, ensuring a denser, cooler oxygen charge reaches the combustion chamber for improved volumetric efficiency.

Inside the carbon cylinder, a washable, multi-layer cotton air filter works in tandem with an internal flow deflector. This aerodynamic design minimizes pressure drops and creates a constant pressure airflow into the intake manifold, resulting in sharper throttle response and increased power throughout the RPM range. This universal kit (ACCDA85-150) is engineered for high-volume air requirements with 85mm diameter inlet and outlet ports.

• Thermal Insulation: Real carbon fiber construction acts as a superior heat barrier compared to plastic or metal.
• Dynamic Overpressure: Engineered to utilize the dynamic pressure of incoming air to force a higher volume into the engine.
• High-Flow Filtration: Features a reusable, pre-oiled multi-layer cotton filter that outperforms OE paper elements.
• Universal Fitment: Designed for custom installations on engines over 1.6L displacement.
• Manufacturer Part Number: ACCDA85-150

The BMC Single Air Universal Conical Filter is a high-performance induction solution designed for custom intake systems and specialized engine configurations. Engineered by the same experts behind BMC's racing filters for Formula 1 and endurance motorsports, the FBSA54-150 utilizes a multi-layered cotton gauze media to provide superior airflow compared to standard paper elements while maintaining critical filtration efficiency.

This universal filter features an epoxy-coated alloy mesh to ensure structural stability against high-vacuum induction and a precision-molded polyurethane flange for a secure, airtight seal. The conical design increases the effective filtration surface area within a compact footprint, making it ideal for engine bays with limited clearance. As a lifetime performance part, this filter is fully washable and reusable with BMC cleaning and oiling kits.

• Manufacturer Part Number: FBSA54-150
• Inlet Diameter: 54mm
• Filter Height: 150mm
• Filtration Media: Multi-layered oiled cotton gauze
• Construction: Epoxy-coated alloy mesh with polyurethane molding
• Design: Universal conical single-air intake

Fits 2015-2024 Alpina B7 models equipped with the 4.4L V8 engine.

The BMC FB930/01 Replacement Panel Air Filter Full Kit is a high-performance upgrade designed to replace the restrictive factory paper elements in your B7. Engineered to improve induction efficiency, these filters utilize multi-layered cotton gauze soaked in a low-viscosity oil to capture impurities down to 7 microns while significantly increasing airflow to the twin-turbocharged V8. This drop-in kit preserves the integrity of the OEM airbox while providing the engine with a more consistent and unrestricted air supply.

• Precision Construction: Features a one-piece molded design with specialized soft rubber to prevent breakage and ensure an airtight seal within the factory housing.
• Advanced Filtration: Epoxy-coated alloy mesh protects the cotton media from fuel vapors and oxidation, maintaining performance across various operating conditions.
• Washable and Reusable: Designed for long-term use; these filters can be cleaned and re-oiled using BMC regeneration kits to maintain peak efficiency.
• Direct Fit: Replaces factory part numbers without modification, ensuring a straightforward installation for the dual-intake system.

• Manufacturer Part Number: FB930/01
• Filter Type: Performance Panel Filter
• Media Material: Oiled Cotton Gauze
• Fitment: 2015-2024 Alpina B7 (4.4L V8)

Fits 2015+ Porsche 911 (991.2) Carrera models (3.0L).

The BMC FB907/04 is a high-performance cylindrical air filter designed to replace the restrictive factory paper element in the Porsche 991.2. Engineered for enthusiasts who demand superior airflow without compromising filtration, this filter uses multi-layered cotton gauze treated with low-viscosity oil to capture contaminants while maintaining a high flow rate. The filter media is supported by an epoxy-coated alloy mesh, ensuring structural stability even under high intake pressure.

• Direct drop-in replacement for the original equipment (OE) filter
• Improved airflow efficiency helps optimize engine response
• Full polyurethane molded frame provides a tight, leak-proof seal in the airbox
• Washable and reusable media for long-term durability
• Precision-engineered to meet or exceed Porsche factory specifications
• Manufacturer Part Number: FB907/04

Fits 1990-2000 Lexus LS 400 models equipped with the 4.0L V8 engine.

The BMC FB865/04 is a high-performance replacement cylindrical air filter designed to replace the restrictive factory paper element. This filter utilizes a multi-layered cotton gauze media soaked in low-viscosity oil to maximize airflow while maintaining superior filtration efficiency for engine protection. Each filter is built with an epoxy-coated alloy mesh to ensure structural integrity against intake pressure and engine heat.

• Direct drop-in replacement for the OE airbox
• Washable and reusable design for a lifetime of service
• Enhanced airflow improves engine response and efficiency
• Precision molded to ensure a tight, leak-free seal
• Manufacturer Part Number: FB865/04

Fits 2014-2023 Mercedes-Benz C63 AMG and C63 AMG S models including the W205 Sedan, S205 Estate, C205 Coupe, and A205 Cabriolet.

The BMC FB845/20 Performance Air Filter Full Kit is a high-flow, direct-replacement solution designed to improve induction efficiency for the twin-turbocharged Mercedes V8 engine. Unlike standard paper filters that must be discarded, BMC filters utilize a multi-layered cotton gauze media soaked in low-viscosity oil to trap impurities as small as 7 microns without significantly obstructing airflow.

• Manufacturer Part Number: FB845/20
• Direct OE Replacement: Precision-molded to ensure a perfect seal within the factory airbox for an easy drop-in installation.
• High-Flow Construction: Features multi-layered cotton gauze reinforced with an epoxy-coated alloy mesh for structural integrity.
• Washable & Reusable: Engineered for longevity; can be cleaned and re-oiled using a BMC regeneration kit to maintain peak performance.
• Full Kit: Includes the complete set of filters required for the C63 AMG's dual intake system.

Fits 2013+ Jaguar F-Type models equipped with the 3.0L Kompressor (Supercharged V6) engine.

This BMC Full Kit provides a direct-fit performance upgrade, replacing the restrictive factory paper air filters with high-flow panel elements. Engineered for precision fitment within the original airbox, these filters utilize a multi-layered filtration media to optimize induction airflow while maintaining superior protection against contaminants.

• Direct drop-in replacement for factory air filters
• Full kit includes both filters required for the Jaguar 3.0L intake system
• One-piece molded polyurethane frame ensures a tight, leak-free seal
• Epoxy-coated alloy mesh protects the filtration media from debris
• Manufacturer Part Number: FB810/20

Fits 2013-2019 Porsche 911 (991) 3.8 Turbo models.

This BMC high-performance replacement panel air filter is engineered to provide significantly higher airflow than the factory paper element, reducing pressure drop and improving engine efficiency. Constructed using a multi-layer cotton gauze media soaked in low-viscosity oil, it captures impurities down to 7 microns without restricting the intake path of the 3.8L flat-six twin-turbocharged engine.

• Precision Engineering: Features a one-piece polyurethane frame molded without welded joints to prevent breakage and ensure a perfect seal in the OE airbox.
• Durable Construction: The filter media is protected by an epoxy-coated alloy mesh, providing resistance against fuel fumes and oxidation.
• Washable and Reusable: Designed for long-term use; the filter can be cleaned and re-oiled using a BMC regeneration kit to maintain peak performance.
• Direct Replacement: Installs into the factory mounting points with no modifications required.
• MPN: FB798/20

Fits 2018-2024 Audi A1 (GB) models equipped with the 2.0L 40 TFSI engine.

The BMC FB756/20 Replacement Panel Air Filter is a high-performance drop-in upgrade designed to replace the restrictive factory paper element. This filter is engineered to provide increased airflow and improved engine aspiration compared to standard filters, helping to optimize induction efficiency without compromising filtration standards.

Each filter features a multi-layered cotton gauze media soaked in low-viscosity oil, held between two epoxy-coated aluminum mesh screens. This construction ensures high permeability and captures impurities down to 7 microns. The filter is built using a unique "Full Moulding" system, creating a single-piece frame without welded joints for maximum durability and a precise seal within the OE airbox.

• Manufacturer Part Number: FB756/20
• Construction: Multi-layered cotton gauze with epoxy-coated alloy mesh
• Installation: Direct replacement for the factory air filter
• Maintenance: Fully washable and reusable for the life of the vehicle
• Origin: Designed and manufactured in Italy

Fits 2014-2015 Porsche 911 (991) 3.8 Carrera GTS.

The BMC FB709/01 Replacement Panel Air Filter Full Kit is a high-performance intake upgrade designed to replace the restrictive factory paper filters in your 991-generation Porsche. Utilizing a multi-layered cotton gauze media soaked in low-viscosity oil and supported by epoxy-coated alloy mesh, this kit provides a significant increase in airflow while maintaining filtration efficiency down to 7 microns.

• Direct replacement for factory air filters (includes full kit requirements)
• Multi-layered cotton gauze media for increased airflow and protection
• Epoxy-coated alloy mesh construction resists fuel vapors and oxidation
• Washable and reusable for a lifetime of performance
• High-precision molding ensures a leak-free seal in the factory airbox
• Manufacturer Part Number: FB709/01

Fits 2017 BMW 3 Series (F30/F31/F80) M3 CS.

The BMC FB647/20 Replacement Panel Air Filter Kit provides a high-performance alternative to standard paper filters. Designed specifically for the 2017 BMW M3 CS, this full kit ensures optimal airflow while maintaining superior filtration to protect your engine from harmful contaminants. BMC filters are engineered using a multi-layered cotton gauze media soaked in low-viscosity oil, secured between epoxy-coated alloy meshes for maximum structural integrity and corrosion resistance.

• Direct drop-in replacement for factory air filters into the original airbox.
• Enhanced airflow compared to OEM paper elements for improved induction efficiency.
• Washable and reusable design ensures a long-term service life.
• Precision-molded rubber frame provides a tight, leak-free seal.
• Manufacturer Part Number: FB647/20

Fits 2003-2005 Lamborghini Gallardo models equipped with the 5.0L V10 engine.

Enhance your engine's induction efficiency with the BMC high-performance replacement panel air filter kit. These filters are designed to drop directly into the factory airbox, replacing restrictive OEM paper elements with multi-layered, low-viscosity oiled cotton gauze. This construction allows for a significantly higher volume of airflow into the intake while maintaining superior filtration levels to protect internal engine components.

Each filter is built with an epoxy-coated alloy mesh to ensure structural stability against high pressure and protection from fuel fumes and oxidation. As a washable and reusable solution, this kit provides a lifetime of service with proper maintenance, eliminating the need for frequent disposable filter replacements. This is a full kit containing both filters required for the Gallardo V10 airbox.

• Direct drop-in replacement for factory air filters
• Multi-layered cotton gauze media for maximum airflow
• Washable and reusable design for extended service life
• Epoxy-coated alloy mesh for reinforced durability
• Manufacturer Part Number: FB523/03

Fits 2007-2010 Mercedes-Benz CL 63 AMG.

The BMC FB521/20 replacement panel filter is a high-performance drop-in upgrade designed to improve induction efficiency and engine protection. Engineered to replace the standard factory paper element, this filter utilizes multi-layered cotton gauze to provide a larger surface area for airflow while trapping impurities as small as 7 microns.

• Direct replacement for the OEM air filter
• Constructed with epoxy-coated alloy mesh for structural integrity
• Washable and reusable for extended service life
• Optimized for increased airflow and consistent power delivery
• Manufacturer Part Number: FB521/20

Note: This vehicle requires two (2) filters for a full replacement change.

Fits 2001-2003 Porsche 911 (996) GT2 (3.6L).

The BMC FB195/01 high-performance replacement panel air filter is engineered to provide superior airflow compared to standard paper filters. By utilizing a multi-layer cotton gauze media soaked in low-viscosity oil, this filter captures smaller impurities while reducing pressure drop across the intake system. This design allows the 3.6L flat-six engine to breathe more efficiently without compromising engine protection.

• Direct drop-in replacement for the factory air box
• Multi-layer cotton gauze media for high-flow filtration efficiency
• Epoxy-coated alloy mesh construction to resist fuel vapors and oxidation
• One-piece molded design ensures a perfect seal and long-term durability
• Washable and reusable for extended service life
• Manufacturer Part Number: FB195/01

Fits 1996-1999 Porsche Boxster and Boxster S (2.5L).

This BMC Replacement Panel Air Filter is a high-performance drop-in upgrade designed to replace your vehicle's restrictive factory paper filter. Developed using technology from Formula 1 and endurance racing, BMC filters provide significantly higher airflow while maintaining superior filtration efficiency to protect your engine from contaminants as small as 7 microns.

Constructed with a multi-layered cotton gauze soaked in low-viscosity oil, the filter media is sandwiched between two epoxy-coated alloy mesh screens. This design ensures structural integrity even under high pressure and allows the filter to be washed and regenerated for the life of the vehicle, reducing waste and maintaining peak performance.

• Direct replacement for the original equipment (OE) filter
• High-flow cotton gauze media increases engine aspiration
• Epoxy-coated alloy mesh protects against fuel fumes and oxidation
• Washable and reusable using BMC cleaning kits
• Manufacturer Part Number: FB140/01

Fits 2022-2024 Ford Ranger and Bronco Raptor models (3.0L V6 EcoBoost).

The BMC FB01173 is a high-performance replacement panel air filter engineered to improve intake efficiency over the restrictive factory paper element. Designed as a direct drop-in for the OE airbox, this filter utilizes a multi-layered cotton gauze media treated with low-viscosity oil to capture contaminants as small as 7 microns while allowing for increased airflow to the 3.0L EcoBoost engine.

• Direct OE replacement for a precise fit in the factory airbox
• Washable and reusable design for long-term serviceability
• Multi-layered cotton gauze protected by epoxy-coated alloy mesh
• Maintains consistent air pressure for improved engine responsiveness
• Manufacturer Part Number: FB01173

Fits 2021-2024 BMW M3 (G80) and M4 (G82) models.

This BMC replacement panel air filter (MPN: FB01118) is designed as a direct drop-in performance upgrade for the factory intake system. Engineered to provide higher airflow than standard paper filters, it utilizes multi-layered cotton gauze media to ensure maximum air delivery to the engine while maintaining superior filtration efficiency for internal component protection.

• Direct replacement for factory OEM panel filters
• High-flow cotton gauze media for improved engine breathing
• Washable and reusable for extended service life
• Precise fitment ensures a tight seal within the factory airbox
• Manufacturer Part Number: FB01118

Fits 2019 and newer Land Rover Defender (L663) models.

The BMC FB01111 replacement panel air filter is a high-performance drop-in upgrade designed to replace the restrictive factory paper element. Engineered using the same technology found in Formula 1 intake systems, this filter features a multi-layered cotton filtration media soaked with low-viscosity oil to capture impurities while maximizing airflow to the engine.

Constructed with an epoxy-coated alloy mesh, the filter ensures protection from petrol fumes and oxidation while maintaining structural integrity under high-pressure intake conditions. The one-piece molding process ensures a perfect seal within the factory airbox, preventing unfiltered air from bypassing the media.

• Direct OE replacement (replaces manufacturer part number FB01111)
• Multi-layer cotton gauze media for increased airflow and superior filtration
• Washable and reusable for an extended service life
• Epoxy-coated alloy mesh prevents corrosion and oxidation
• Fits into the original equipment airbox without modification

Fits 2020+ Porsche Macan Turbo and GTS models equipped with the 2.9L Twin-Turbo engine.

The BMC FB01098 replacement panel air filter is a high-performance drop-in upgrade designed to replace the restrictive factory paper element in your Macan. Built to the same standards as BMC's championship-winning Formula 1 and endurance racing filters, this unit provides a higher volume of airflow without compromising filtration efficiency. The multi-layered cotton gauze media, soaked in low-viscosity oil, captures impurities as small as 7 microns to protect your 2.9TT engine from harmful contaminants.

• Direct OE replacement (Part # FB01098) for factory mounting points
• High-flow cotton gauze media improves engine responsiveness and airflow
• Epoxy-coated alloy mesh protects against fuel vapors and oxidation
• Full-molded construction ensures a leak-free seal within the factory airbox
• Washable and reusable for long-term service life
• Engineered specifically for the 2.9L V6 Twin-Turbo platform

Fits 2018-2024 Audi Q7 and Q8 (4M) models (3.0L TDI).

The BMC FB01060 is a high-performance drop-in replacement air filter engineered to improve airflow and filtration efficiency over the factory paper element. Designed using F1-derived technology, this panel filter utilizes a multi-layered cotton gauze media soaked in low-viscosity oil to capture impurities as small as 7 microns. The filter is reinforced with an epoxy-coated alloy mesh to ensure structural stability under high-pressure intake conditions.

• Direct replacement for the OEM air filter; bolts directly into the factory airbox.
• Single-piece polyurethane molding eliminates welded joints for increased durability and a perfect seal.
• Washable and reusable design ensures a lifetime of service with regular maintenance using BMC cleaning kits.
• Optimized for a higher airflow rate than standard paper filters, reducing pressure drop.
• Manufacturer Part Number: FB01060

Fits select 2019-2024 Toyota Supra GR (3.0L) and BMW 330i models.

The BMC FB01054 high-performance replacement air filter is designed to improve airflow and engine efficiency compared to restrictive factory paper elements. Constructed with a multi-layered cotton gauze media soaked in low-viscosity oil, this filter captures contaminants down to 7 microns while maintaining a high flow rate for better combustion responsiveness.

• Precision Engineering: Features a one-piece molding with a red polyurethane frame for a perfect seal in the factory airbox, preventing unfiltered air bypass.
• Durable Construction: The filter media is reinforced with an epoxy-coated alloy mesh to resist fuel fumes and oxidation.
• Sustainability: Fully washable and reusable with a BMC cleaning kit, providing a lifetime of service without needing replacement.
• Direct OE Replacement: Drops into the factory housing with no modifications; compatible with original engine management sensors.
• Manufacturer Part Number: FB01054

The BMC FB986/20 Replacement Panel Air Filter is a high-performance drop-in solution designed for the 2018 Porsche Panamera II (971) (2.9L). Engineered to replace the restrictive factory paper element, this filter utilizes multi-layered cotton gauze soaked in low-viscosity oil to capture impurities while significantly improving airflow for better engine response.

• Direct Fit: Designed to install directly into the OEM airbox with no modifications required.
• Advanced Media: Features multi-layered cotton filtration media protected by an epoxied alloy mesh to resist fuel vapors and oxidation.
• Reusable Design: Fully washable and regenerable using BMC cleaning kits, eliminating the need for disposable paper filters.
• F1 Heritage: Manufactured to the same exacting standards BMC uses for its Formula 1 and endurance racing partners.
• MPN: FB986/20

Fits the 2018 Mercedes AMG GT4 (X290) 43 (3.0L).

This BMC high-performance replacement panel air filter (part number FB956/20) is a direct drop-in upgrade for the factory intake system. Designed for enthusiasts seeking better engine breathing without compromising filtration, BMC filters utilize a multi-layered cotton gauze media treated with low-viscosity oil. This construction allows for a higher volume of air to reach the intake compared to standard paper elements, reducing pressure drop while capturing impurities down to 7 microns.

• Direct Fit: Designed to replace the OE filter in the factory airbox with no modifications required.
• Premium Construction: Features a continuous polyurethane frame to prevent distortion and ensure a precise, leak-free seal.
• Race-Proven Media: Multi-layer oiled cotton gauze protected by an epoxy-coated alloy mesh for structural integrity and corrosion resistance.
• Sustainable Design: Fully washable and reusable with BMC regeneration kits, eliminating the need for frequent disposables.
• Part Number: FB956/20

Fits 2016-2024 Porsche Boxster and Boxster S models (2.0L).

The BMC FB926/20 is a high-performance replacement panel air filter designed to provide superior airflow and filtration over the factory paper element. Engineered for the 718-generation intake system, this filter utilizes a multi-layered cotton gauze media soaked in low-viscosity oil to capture impurities as small as 7 microns without restrictive pressure drops.

BMC filters are manufactured using a specialized "Full Moulding" process, which creates the iconic red filter from a single mold with no welded joints. This construction ensures the filter is highly durable and maintains its shape under high-stress conditions. The media is reinforced with an epoxy-coated alloy mesh, protecting the cotton from intake debris and providing structural integrity.

• Direct drop-in replacement for the OE air filter
• Multi-layered cotton gauze media for high permeability
• Epoxy-coated alloy mesh for corrosion resistance and strength
• Washable and reusable for long-term service life
• Manufacturer Part Number: FB926/20