Fits 1990-1997 Ford F-250, F-250 HD, and F-350 trucks.

Engineered to improve vehicle handling and safety, the Hellwig 7596 rear sway bar is an essential upgrade for Ford heavy-duty trucks that face the demands of modern towing and hauling. This 1-inch diameter bar significantly reduces body roll and increases lateral stiffness, providing an immediate improvement in cornering stability and driver confidence.

Built for durability, this sway bar is manufactured from solid, heat-treated chromoly steel. This high-strength material allows for a larger-than-stock diameter that resists the swaying motions common in high-center-of-gravity vehicles or those carrying heavy loads. The kit features precision-engineered components designed for a quick bolt-on installation, making it a professional-grade solution for better everyday drivability.

• Material: Solid, heat-treated chromoly steel
• Diameter: 1.00 inch
• Position: Rear
• Installation: Bolt-on design with precision hardware
• MPN: 7596
• Warranty: Limited Lifetime Warranty

Fits select 2016-2024 Nissan NV1500, NV200, NV2500, NV3500, Titan, and Titan XD models.

The Hellwig 7748 rear sway bar is a precision-engineered handling upgrade designed to reduce body roll and improve vehicle stability, particularly during towing or heavy-haul conditions. Manufactured from solid 1-inch diameter 4140 chromoly steel, this bar is heat-treated to increase stiffness and durability over the factory-installed equipment. The adjustable rate design allows you to fine-tune the suspension stiffness to match your specific load requirements and driving style.

This sway bar is designed for a direct-fit installation that reuses the factory end links, providing an immediate improvement in cornering confidence and everyday drivability. Whether you are navigating tight urban environments in an NV series van or hauling heavy trailers with a Titan XD, this chromoly bar provides the necessary lateral support to maintain control.

• Part Number: 7748
• Material: Solid heat-treated 4140 chromoly steel
• Diameter: 1.0 inch
• Design: Adjustable rate for custom handling tuning
• Installation: Quick bolt-on design; reuses factory end links
• Benefits: Reduced body roll and improved cornering stability
• Warranty: Limited Lifetime Warranty

Fits select 1987-2004 Nissan D21, Pickup, and Frontier. This Hellwig EZ-1000 Helper Spring kit is a medium-duty suspension solution designed to restore vehicle ride height, improve control, and increase stability when towing or hauling. These units are fully adjustable, allowing you to tune the spring tension via heavy-duty U-bolts to suit your specific load requirements or to level out uneven side-to-side weight distribution.

Manufactured at Hellwig's California facility, these springs are crafted from heat-treated ASTM 5160 alloy spring steel for long-term resilience and performance. The components feature a high-quality powder-coated and plated finish to resist corrosion in harsh underbody environments. The simple bolt-on design installs easily with common hand tools, making it an effective upgrade for vehicles requiring up to 1,000 lbs of additional level load support.

• Level load capacity: Up to 1,000 lbs
• Material: Heat-treated ASTM 5160 alloy spring steel
• Finish: Heavy-duty powder coating and zinc plating
• Adjustability: Fully tunable via included U-bolt hardware
• Installation: Simple bolt-on design using basic hand tools
• Manufacturer Part Number: 1265
• Origin: Made in the USA
• Warranty: Limited Lifetime Warranty

Fits 2021-2025 Ford F-150 2WD/4WD models with 0-2 inches of rear lift, including Raptor, Tremor, and heavy-duty configurations.

The Hellwig 7788 rear sway bar is a critical suspension upgrade for F-150 owners looking to eliminate excessive body roll and improve lateral stability. While factory sway bars are often undersized for the demands of towing or hauling heavy payloads, this 1-inch solid rear bar is engineered to increase roll stiffness, providing a more planted feel through corners and reducing the "white-knuckle" sensation during high-speed maneuvers or heavy crosswinds.

Constructed from high-strength, solid heat-treated chromoly steel, this sway bar offers superior durability and resistance to deformation compared to hollow alternatives. The bolt-on design allows for a straightforward installation using provided hardware, making it a highly effective investment for both daily drivability and demanding tow/haul conditions.

• Bar Diameter: 1 inch
• Material: Solid, heat-treated chromoly steel
• Compatibility: Fits 2WD and 4WD models with 0-2" of rear lift
• Performance: Reduces body roll and improves cornering traction
• Manufacturer Part Number: 7788
• Warranty: Limited Lifetime Warranty

Fits select 2004-2026 Chevrolet Silverado 1500/2500/3500, GMC Sierra 2500, RAM ProMaster, and Dodge/Freightliner/Mercedes-Benz Sprinter 2500/3500.

The Hellwig LP-25 Load Pro helper spring is the heavy-duty workhorse of the Hellwig line, engineered specifically for fleet vehicles and trucks that consistently carry heavy loads. Utilizing a full-time spring rate design, this 3-leaf helper spring stack provides up to 2,500 lbs of level load capacity, significantly reducing rear-end sag, improving cornering stability, and enhancing overall control under load.

Built from high-quality alloy steel, the Load Pro series is tunable, allowing you to adjust the spring rate to match your specific hauling or towing requirements. This is an ideal solution for service trucks, delivery vans, and work vehicles that require constant suspension support.

Note: A vehicle-specific LP Mounting Kit is required for installation (sold separately). If your vehicle is equipped with factory contact overload springs, please verify fitment for your specific model year.

• Manufacturer Part Number: 2551
• Series: Load Pro (LP-25)
• Level Load Capacity: Up to 2,500 lbs
• Design: 3-leaf stack with full-time spring rate
• Application: Suitable for 1-ton and fleet applications
• Features: Tunable spring rate for custom load management
• Warranty: Limited Lifetime Warranty

Fits select 2004-2012 Chevrolet Colorado and GMC Canyon models. The Hellwig 1520 Load Pro 15 (LP-15) helper spring kit is designed to increase your vehicle's level load carrying capacity by up to 1,500 lbs, up to the manufacturer's Gross Vehicle Weight Rating (GVWR). These helper springs are an ideal solution for small and mid-size trucks that frequently haul equipment or tow trailers and require improved stability and control.

Manufactured in California, each spring is crafted from heat-treated ASTM 5160 alloy spring steel for long-lasting durability. The kit features a simple bolt-on design that installs using common hand tools. The included heavy-duty U-bolts allow for precise tuning; you can easily adjust the tension to suit your specific load requirements or towing needs. The components are finished with a combination of plating and powder coating for superior corrosion resistance.

• Manufacturer Part Number: 1520
• Load Capacity: Up to 1,500 lbs
• Material: Heat-treated ASTM 5160 alloy spring steel
• Adjustable: Tunable U-bolts for varying load requirements
• Finish: Powder-coated and plated components for corrosion protection
• Installation: Simple bolt-on design; includes all necessary hardware and instructions
• Origin: Manufactured in the USA
• Warranty: Limited Lifetime Warranty

Fits 2015-2021 Ford F-150 models equipped with a 4-inch to 6-inch lift kit, including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, and Tremor trims.

Standard factory sway bars are often insufficient for the increased center of gravity and leverage found on lifted trucks, especially when towing or hauling heavy loads. The Hellwig 7882 rear sway bar is a heavy-duty suspension upgrade engineered to significantly reduce body roll and improve lateral stability. By increasing the roll stiffness of the rear suspension, this bar provides more predictable handling in corners and improved driver control during high-stress maneuvers.

This sway bar is manufactured from 1-inch diameter, solid, heat-treated chromoly steel for maximum durability and resistance to fatigue. The bolt-on design allows for a straightforward installation using high-quality hardware and precision-engineered components.

• Replaces or upgrades undersized factory rear sway bars
• Reduces body roll and improves cornering traction
• Enhances stability during heavy towing and hauling conditions
• Solid, heat-treated chromoly construction for superior strength
• Engineered specifically for trucks with 4-6 inch lift kits
• Manufacturer Part Number: 7882
• Limited Lifetime Warranty

Fits select 2020-2026 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD.

Engineered specifically for heavy-duty towing and hauling, the Hellwig 7328 Big Wig rear sway bar is an essential upgrade for late-model HD trucks. While factory-installed sway bars provide baseline stability, they are often insufficient for the high center of gravity and weight associated with slide-in campers or heavy fifth-wheel trailers. This Big Wig series bar features a massive 1-5/16 inch diameter to significantly reduce body roll and improve driver control during cornering and in high crosswinds.

Constructed from solid, heat-treated chromoly steel, this bar offers superior strength and torsional stiffness. The adjustable rate design allows you to fine-tune the suspension response to match your specific load requirements, ensuring a balance of comfort and safety whether the truck is empty or at maximum payload. This kit is designed for a quick bolt-on installation using precision-engineered components.

• MPN: 7328
• Series: Big Wig Rear Sway Bar
• Diameter: 1-5/16 inch
• Material: Solid heat-treated chromoly
• Type: Adjustable rate
• Installation: Bolt-on with included hardware
• Application: Optimized for heavy-duty tow/haul cycles

Fits 2021-2024 Ford Bronco models, including Badlands, Base, Big Bend, Black Diamond, First Edition, Heritage Edition, and Wildtrak.

The Hellwig 7909 rear sway bar is a foundational handling upgrade designed to significantly reduce body roll and improve cornering stability. While the factory Bronco suspension is capable, it often lacks the lateral stiffness required for consistent performance under heavy loads or during spirited driving. This 7/8-inch diameter bar provides the necessary torsional rigidity to keep the vehicle flatter through corners, improving both driver confidence and passenger comfort.

Constructed from solid, heat-treated chromoly steel, this sway bar is engineered for long-term durability and consistent spring rates. It features an adjustable rate design, allowing you to fine-tune the suspension's stiffness to match your specific driving style or towing requirements. The kit is designed for a direct bolt-on installation, utilizing precision-engineered components that integrate with factory mounting points.

• Manufacturer Part Number: 7909
• Diameter: 7/8 inch (22.2mm)
• Material: Solid, heat-treated chromoly steel
• Design: Adjustable rate for customized handling
• Installation: Quick bolt-on application with included hardware
• Finish: Durable powder coat for corrosion resistance

Fits select 2017-2026 Ford F-250 and F-350 Super Duty 4WD models equipped with a 2-inch rear lift.

The Hellwig 7845 rear sway bar is a critical handling upgrade designed to combat body roll and improve lateral stability on heavy-duty Ford trucks. Engineered specifically for vehicles with a 2-inch rear lift, this bar replaces or supplements the factory equipment to provide better cornering control and increased safety during towing or hauling high-center-of-gravity loads.

Constructed from solid, 1-1/8 inch diameter heat-treated 4140 chromoly steel, this sway bar offers significantly higher torsional stiffness than stock units. The precision-engineered design ensures a direct bolt-on installation, making it an essential investment for drivers seeking improved drivability and confidence on both highways and technical terrain.

• Manufacturer Part Number: 7845
• Material: Solid, heat-treated 4140 chromoly steel
• Bar Diameter: 1-1/8 inch
• Fitment: 4WD models with 2-inch rear lift only
• Installation: Quick bolt-on design with included hardware
• Warranty: Limited Lifetime Warranty

Fits 2017-2023 Mercedes-Benz and Freightliner Sprinter 2500/3500 models.

The Hellwig 7772 rear sway bar is engineered to significantly reduce body roll and improve lateral stability on high-profile Mercedes-Benz and Freightliner Sprinter vans. By increasing the roll stiffness of the rear suspension, this upgrade provides better cornering traction and more predictable handling, which is especially critical for vehicles with high centers of gravity, heavy interior builds, or those frequently used for towing and hauling.

• Forged from solid, heat-treated 4140 chromoly steel for superior strength and longevity
• 1-5/16 inch (33mm) diameter increases stiffness over factory components
• Specifically tuned for everyday drivability and heavy tow/haul conditions
• Helps mitigate sway caused by crosswinds and passing large vehicles
• Direct-fit installation to the vehicle's factory mounting points
• Manufacturer Part Number: 7772
• Limited Lifetime Warranty

Fits select 1963-2014 Chevrolet, Ford, Dodge, and GMC trucks and vans. The Hellwig EZ-990 Helper Spring kit is a medium-duty suspension solution designed to provide up to 2,000 lbs of level load-carrying capacity. Perfect for light towing and hauling, these springs help restore ride height, improve control, and enhance stability when your vehicle is under load.

Manufactured in the USA from heat-treated ASTM 5160 alloy spring steel, these units are built for longevity and consistent performance. The simple bolt-on design allows for a straightforward installation using common hand tools. Because the heavy-duty U-bolts are fully adjustable, you can fine-tune the support to your specific needs or adjust each side independently to compensate for uneven loads.

• Rated for up to 2,000 lbs level load capacity
• Constructed from heat-treated ASTM 5160 alloy spring steel
• Fully adjustable U-bolt system for tunable support
• Includes heavy-duty powder-coated and plated hardware
• Easy bolt-on installation with no drilling required
• Manufacturer Part Number: 991

Fits 2009-2014 Ford F-150 2WD and 4WD models.

The Hellwig EZ-990 Helper Spring kit (MPN 989) provides a robust solution for F-150 owners requiring additional support for light towing and hauling. These medium-duty springs assist in maintaining a level ride height and improving overall vehicle control by reducing rear-end sag. Manufactured in California using heat-treated ASTM 5160 alloy spring steel, these units offer up to 2,000 lbs of level load carrying capacity.

This kit features a step bracket style leaf design that bolts directly to the factory leaf pack using common hand tools. The included heavy-duty U-bolts allow for precise tuning, letting you adjust the tension independently to compensate for uneven side-to-side loads. All components are finished with durable powder coating and plating to ensure long-term corrosion resistance in harsh underbody environments.

• Manufacturer Part Number: 989
• Load Capacity: Up to 2,000 lbs
• Material: Heat-treated ASTM 5160 alloy spring steel
• Finish: Powder-coated and plated components
• Adjustability: Tunable via heavy-duty U-bolts
• Installation: Simple bolt-on design with included hardware
• Warranty: Limited Lifetime Warranty

Fits select 2007-2022 Chevrolet Silverado 1500 and GMC Sierra 1500 models.

The Hellwig EZ-990 (EZ Level) Helper Spring kit is a medium-duty suspension solution engineered to provide up to 2,000 lbs of level load carrying capacity. Designed specifically for light-duty towing and hauling, these springs help eliminate rear-end sag and improve vehicle control. The step-bracket style leaf springs can be adjusted independently, allowing you to compensate for uneven side-to-side loads or varying trailer tongue weights by simply adjusting the heavy-duty U-bolts.

Constructed from heat-treated ASTM 5160 alloy spring steel in California, these units are built for longevity and consistent performance. The kit features a simple bolt-on design that utilizes common hand tools for installation, requiring no permanent modifications to your factory suspension. Every component is finished with a durable powder coating or plating to resist corrosion in harsh undercar environments.

• Level load carrying capacity up to 2,000 lbs
• Manufactured from high-strength, heat-treated ASTM 5160 alloy spring steel
• Fully adjustable U-bolt system for tunable tension and load support
• Easy bolt-on installation with common hand tools
• Durable powder-coated and plated hardware for maximum protection
• Includes all necessary heavy-duty mounting hardware and instructions
• Manufacturer Part Number: 987
• Limited Lifetime Warranty

Fits select 1999-2007 Chevrolet Silverado 1500 and GMC Sierra 1500 models, including Classic, Hybrid, SS, and K1500 variants.

The Hellwig EZ-990 medium-duty helper spring kit is engineered to provide additional rear-end support for vehicles that frequently haul light to medium loads or tow small trailers. By reinforcing the factory leaf pack, these helper springs improve vehicle control, reduce sag, and enhance stability without permanently hardening the ride. Each kit is manufactured in California using heat-treated ASTM 5160 alloy spring steel for long-term durability and consistent performance.

This system features a fully adjustable bolt-on design. Using the included heavy-duty U-bolts and hardware, installers can tune the tension to match specific load requirements or even adjust them independently to compensate for uneven side-to-side weight distribution. The components are finished with a combination of powder coating and plating to resist corrosion in harsh environments.

• Manufacturer Part Number: 986
• Level load carrying capacity: Up to 2,000 lbs
• Material: Heat-treated ASTM 5160 alloy spring steel
• Hardware: Heavy-duty powder-coated and plated U-bolts and brackets
• Adjustment: Independent side-to-side tunability
• Installation: Simple bolt-on with common hand tools; no drilling required
• Warranty: Limited Lifetime Warranty

Fits select 1988-1998 Chevrolet/GMC C1500 and K1500, and 2007-2020 Toyota Tundra (2WD/4WD).

The Hellwig EZ-990 Medium-Duty Helper Spring kit is a versatile, bolt-on suspension solution designed to restore a level ride height and improve vehicle control during towing and hauling. Manufactured from heat-treated ASTM 5160 alloy spring steel in Hellwig's California facility, these springs provide up to 2,000 lbs of level load-carrying capacity. The fully adjustable design allows you to tune the spring rate for uneven side-to-side loads or varying weight requirements using the included heavy-duty U-bolts.

This medium-duty kit is ideally suited for light-duty trucks and SUVs that need additional assistance when loaded without sacrificing ride quality. The simple bolt-on design uses common hand tools for a hassle-free installation, mounting directly to the factory leaf springs to reduce rear-end sag and improve stability.

• Level load capacity: Up to 2,000 lbs
• Material: Heat-treated ASTM 5160 alloy spring steel
• Finish: Heavy-duty powder-coated and plated components
• Adjustable rate for independent side-to-side tuning
• Simple bolt-on installation with common hand tools
• Includes heavy-duty hardware and installation instructions
• Manufacturer Part Number: 985
• Limited Lifetime Warranty
• Made in the USA

Fits 2004-2008 Ford F-150 (2WD/4WD) including XL, XLT, FX2, FX4, King Ranch, Lariat, Limited, and STX models.

The Hellwig EZ-990 Helper Spring kit is a medium-duty suspension solution designed to provide up to 2,000 lbs of level load-carrying capacity for drivers who frequently tow light trailers or haul moderate payloads. This step-bracket style leaf spring kit improves vehicle control and stability by reducing rear-end sag and body roll without permanently hardening the ride.

Manufactured in Hellwig's California facility from heat-treated ASTM 5160 alloy spring steel, these units are built for durability and consistent performance. The kit includes heavy-duty powder-coated and plated hardware for corrosion resistance. The simple bolt-on design installs with common hand tools, and the included U-bolts allow for independent side-to-side adjustment to compensate for uneven loads.

• Load Capacity: Up to 2,000 lbs level load
• Material: Heat-treated ASTM 5160 alloy spring steel
• Adjustment: Fully tunable via heavy-duty U-bolts
• Installation: Simple bolt-on design; no drilling usually required
• Manufacturer Part Number: 984
• Warranty: Limited Lifetime Warranty

Fits 1990-2011 Ford Ranger and Mazda B2300, B2500, B3000, and B4000 2WD/4WD models.

The Hellwig EZ-990 Helper Spring kit is a medium-duty suspension solution designed to restore a level ride height and improve vehicle control when towing or hauling. These springs provide up to 2,000 lbs of level load-carrying capacity, making them ideal for light-duty trucks and SUVs that experience rear-end sag under load. The adjustable design allows you to fine-tune the tension using heavy-duty U-bolts to compensate for uneven side-to-side loads or changing cargo requirements.

Manufactured in California from heat-treated ASTM 5160 alloy spring steel, these units are built for long-term durability. Each kit includes high-quality powder-coated and plated components to resist corrosion in harsh undercar environments. The simple bolt-on design installs easily with common hand tools, mounting directly to the factory leaf pack to provide immediate support without a harsh unloaded ride.

• Manufacturer Part Number: 983
• Load Capacity: Up to 2,000 lbs
• Material: Heat-treated ASTM 5160 alloy spring steel
• Finish: Powder-coated and plated hardware
• Fully adjustable U-bolt system for custom tuning
• Includes all necessary heavy-duty mounting hardware and instructions
• Limited Lifetime Warranty

Fits 2003-2008 Dodge Ram 1500 2WD and 4WD models.

The Hellwig EZ-990 Helper Spring kit is a medium-duty suspension upgrade designed to improve vehicle control and stability while hauling or towing. These springs provide up to 2,000 lbs of level load-carrying capacity, effectively reducing rear-end sag and preventing bottoming out. Manufactured from heat-treated ASTM 5160 alloy spring steel in California, these units are built for durability and consistent performance under load.

The EZ-990 features a step-bracket style leaf design that bolts directly to the factory leaf pack using common hand tools. The included heavy-duty U-bolts allow for independent side-to-side adjustment, making it easy to compensate for uneven loads or changing towing requirements. This kit includes all necessary powder-coated and plated hardware for a complete installation.

• Load Capacity: Up to 2,000 lbs
• Material: Heat-treated ASTM 5160 alloy spring steel
• Finish: Black powder-coated components with plated hardware
• Design: Step bracket style leaf for medium-duty assistance
• Adjustability: Fully tunable via included heavy-duty U-bolts
• Installation: Simple bolt-on design with no specialized tools required
• Warranty: Limited Lifetime Warranty
• Manufacturer Part Number: 982

Fits 2005-2013 Toyota Tacoma (Base, Pre Runner, and X-Runner).

Hellwig EZ-990 medium-duty helper springs provide essential support for light towing and hauling, allowing your 2005-2013 Toyota Tacoma to maintain a level stance under load. These units are designed to improve vehicle control and stability by providing up to 2,000 lbs of additional level load carrying capacity. Unlike fixed suspension upgrades, these springs are fully tunable; using simple hand tools, you can adjust the heavy-duty U-bolts to match your specific load requirements or to correct uneven side-to-side sag.

Built for durability and performance, these helper springs are manufactured in Hellwig's California facility using heat-treated ASTM 5160 alloy spring steel. The kit includes heavy-duty powder-coated and plated components to resist corrosion in harsh environments. Installation is a straightforward bolt-on process requiring only common hand tools, with no drilling required.

• Level load capacity: Up to 2,000 lbs
• Material: Heat-treated ASTM 5160 alloy spring steel
• Finish: Powder-coated and plated components for corrosion resistance
• Adjustment: Independent side-to-side tuning via heavy-duty U-bolts
• Installation: Simple bolt-on design with no drilling required
• Warranty: Limited Lifetime Warranty
• Manufacturer Part Number: 981

Fits 2014-2023 Toyota Tacoma models including Base, Pre Runner, SR, SR5, Limited, Trail, and TRD Sport/Off-Road/Pro.

The Hellwig EZ-990 Helper Spring kit provides a medium-duty suspension solution for Toyota Tacoma owners looking to restore ride height and maintain control while hauling or towing. These springs are designed to assist the factory leaf pack when under load, effectively reducing rear-end sag, body roll, and instability. Each kit is fully tunable via heavy-duty U-bolts, allowing you to adjust the tension to match your specific load requirements or even level out uneven side-to-side weight distribution.

Manufactured in California, these helper springs are forged from heat-treated ASTM 5160 alloy spring steel for long-term durability and resistance to fatigue. The components feature a combination of heavy-duty powder coating and plating to protect against corrosion in harsh environments. Installation is a straightforward bolt-on process using common hand tools, requiring no drilling or permanent vehicle modifications.

• Level load carrying capacity: Up to 2,000 lbs
• Material: Heat-treated ASTM 5160 alloy spring steel
• Finish: Black powder-coated springs with plated hardware
• Adjustment: Fully adjustable U-bolt system for custom load leveling
• Installation: Simple bolt-on design with included hardware
• Manufacturing: Made in the USA
• Warranty: Limited Lifetime Warranty
• Manufacturer Part Number: 980

Fits 2015-2022 Ford F-150 2WD/4WD models including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, SSV, Tremor, and Police Responder.

The Hellwig EZ-990 helper spring kit is a medium-duty suspension solution designed to improve control and maintain a level ride height during towing or hauling. Manufactured in California from heat-treated ASTM 5160 alloy spring steel, these springs provide up to 2,000 lbs of additional level load-carrying capacity. The step-bracket style leaf design allows for independent side-to-side adjustment, making it a professional-grade fix for uneven loads or rear-end sag.

Installation is straightforward with a 100% bolt-on design that utilizes common hand tools. The kit features heavy-duty powder-coated and plated components for long-term durability against the elements. Included adjustable U-bolts allow you to fine-tune the tension to match your specific load requirements, ensuring your F-150 remains stable and predictable under load.

• Level Load Capacity: Up to 2,000 lbs
• Material: Heat-treated ASTM 5160 alloy spring steel
• Construction: Step-bracket leaf style with heavy-duty U-bolts
• Finish: Powder-coated and plated hardware for corrosion resistance
• Installation: Simple bolt-on design; no drilling required
• Adjustability: Tunable for uneven side-to-side loads
• Manufacturer Part Number: 978
• Warranty: Limited Lifetime Warranty

Fits select 2016-2023 Ford F-250 and F-350 Super Duty models (XL, XLT, Lariat, King Ranch, Platinum, and Limited) equipped with factory contact overload springs.

The Hellwig 9706 Contact Helper Spring kit is engineered to provide immediate support and stability when your truck is under load. By adding two additional leaves directly to the factory contact overload springs, this kit ensures the suspension engages the contact pads sooner. This results in significantly reduced rear-end sag and improved level-load carrying capacity, making it an essential upgrade for heavy towing and hauling.

These helper springs are designed for a straightforward installation, mounting directly to the existing factory contact springs. Because they only engage when the vehicle is loaded, they leave your factory ride quality unchanged during normal daily driving when the bed is empty.

• Includes 2 additional leaves to augment factory contact helpers
• Increases spring rate when loaded to reduce sag and improve handling
• Preserves comfortable factory ride quality when the vehicle is unladen
• Simple bolt-on installation to factory mounting points
• Manufacturer Part Number: 9706
• Limited Lifetime Warranty

The Hellwig Contact Helper Spring Kit is engineered to increase your truck's load-carrying capacity by reinforcing the factory overload springs. By adding two additional leaves to the existing contact helper pack, this kit ensures the suspension engages the factory contact pads earlier as the vehicle is loaded. This design provides superior support, reduces rear-end sag, and maintains a level stance during heavy hauling or towing.

Fits select 1988-2023 Ford F-250/F-350, F-250/F-350 Super Duty, Chevrolet Silverado 3500 HD, and GMC Sierra 3500 HD.

Because these leaves only engage when the vehicle is under load, they do not affect ride quality when the truck is empty, preserving the original factory feel. Manufactured from heat-treated alloy steel, the kit mounts directly to the factory contact springs for a straightforward installation that requires no permanent modifications.

• Includes 2 additional leaves per side to increase spring rate under load
• Engages factory contact pads sooner to reduce sag and improve stability
• Maintains factory ride quality when the vehicle is unladen
• Constructed from durable heat-treated alloy steel
• Includes all necessary mounting hardware for an easy installation
• Manufacturer Part Number: 9703
• Limited Lifetime Warranty

Fits select 1986-2005 Chevrolet Astro, GMC Safari, Dodge Dakota/Durango, Ford Explorer, GMC Jimmy, and Toyota Tacoma.

The Hellwig Load Pro 15 (LP-15) helper spring kit is engineered to restore a level ride height and improve handling when your vehicle is under load. By reinforcing the factory leaf pack, these springs provide up to 1,500 lbs of additional level load carrying capacity (not to exceed the vehicle's GVWR). Manufactured in Hellwig's California facility from heat-treated ASTM 5160 alloy spring steel, these units are designed to withstand heavy hauling while maintaining vehicle control and stability.

• Increased Stability: Reduces rear-end sag and improves steering control while towing or hauling.
• Adjustable Tension: The heavy-duty U-bolts allow you to fine-tune the spring rate to match your specific load requirements.
• Durable Finish: Components are both plated and powder-coated to resist corrosion and road debris.
• Easy Installation: Simple bolt-on design utilizing common hand tools for a hassle-free setup.

Specifications & Kit Contents:

• Manufacturer Part Number: 815
• Material: Heat-treated ASTM 5160 alloy spring steel
• Load Capacity: Up to 1,500 lbs
• Kit Includes: Spring leaves, heavy-duty U-bolts, plated and powder-coated hardware, and installation instructions
• Warranty: Limited Lifetime Warranty

Fits 2021-2025 Ford F-150 Raptor.

The Hellwig 7987 rear sway bar is a precision-engineered suspension upgrade designed to significantly reduce body roll and improve cornering stability for the Ford F-150 Raptor. Manufactured from solid, heat-treated chromoly steel, this 1-inch diameter bar offers superior stiffness over the factory unit, providing better control during high-speed maneuvers and while hauling or towing.

This adjustable-rate sway bar allows owners to fine-tune the suspension stiffness to match specific driving conditions. The system features a straightforward bolt-on installation, utilizing factory mounting points for a secure and reliable fit.

• MPN: 7987
• Diameter: 1 inch (25.4mm)
• Material: Solid, heat-treated chromoly steel
• Design: Adjustable rate for custom handling
• Installation: Bolt-on design with included hardware
• Finish: Durable hammer-tone powder coat

Fits select 2007-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 (including Classic Denali and Hybrid models) at stock ride height.

Hellwig 7985 adjustable end links are engineered to replace worn or flexible factory components with a heavy-duty solution designed for the toughest conditions. These end links improve the effectiveness of your sway bar by reducing deflection, providing more immediate suspension response. Each link features specially designed polyurethane bushings that accommodate high degrees of articulation without the binding often found in OE rubber components.

Built for longevity and maintenance-free service, this kit utilizes powder-coated components and zinc-plated hardware to resist corrosion. The adjustable design allows for a 2-3 inch range from their shortest length, ensuring precise fitment and alignment. Installation is a straightforward bolt-on process that can be completed with common hand tools.

• Manufacturer Part Number: 7985
• Application: Stock ride height vehicles
• Adjustability: 2-3 inches of total adjustment
• Bushings: High-articulation polyurethane
• Finish: Powder-coated links with zinc-plated hardware
• Installation: Bolt-on design requires only basic hand tools

Fits select 1999-2014 Ford F-250 and F-350 Super Duty trucks equipped with a 4-inch to 6-inch suspension lift.

Hellwig 7977 adjustable end links are engineered as a heavy-duty replacement for factory components that often fail or reach their limit on lifted applications. These upgraded links provide the necessary length and strength to maintain proper sway bar geometry, ensuring your vehicle handles predictably under load or during high degrees of articulation. Each link is constructed with heavy-duty materials and features a 2-3 inch adjustment range from its shortest setting, allowing for precise fine-tuning of the sway bar position.

• Manufactured with powder-coated components for superior corrosion resistance
• Includes zinc-plated hardware for long-term durability
• Specially designed polyurethane bushings handle increased articulation without binding
• Adjustable design (2-3 inches of travel) accommodates varying lift heights
• Direct bolt-on installation with common hand tools
• Manufacturer Part Number: 7977
• Limited Lifetime Warranty

Hellwig 7961 heavy-duty adjustable sway bar end links provide a robust connection for vehicles requiring custom lengths or increased strength under load. Designed specifically for heavy-duty applications including Class C motorhomes and 1-ton pickup trucks, these links allow for precise adjustment between 8 and 11 inches to maintain proper sway bar geometry. Each unit features high-articulation polyurethane bushings to handle extreme suspension travel while providing maintenance-free service.

• Manufacturer Part Number: 7961
• Adjustable length range: 8-11 inches
• Designed for vehicles up to Class C motorhomes and 1-ton pickups
• High-articulation polyurethane bushings for improved durability
• Powder-coated components and zinc-plated hardware for corrosion resistance
• Installation requires common hand tools
• Note: May require 7964 clevis mount kit for vehicles with horizontal mounting points
• Limited Lifetime Warranty