The SourceLT will save hours of wiring & installation time! It is a small,solid-state6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

• It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone

This Part Fits:

sPOD BantamX HD vehicle-specific kit for Toyota Tundra (’22-on) has been designed specifically to integrate the sPOD HD panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.

• Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily

The LED control switch can be routed through the firewall into the cabin or connect to the module via Bluetooth with the smartphone app. In-cabin, on-the-fly power adjustments can be made to accommodate your driving needs. Select one of four power settings on the in-cab LED control switch or control the module remotely via the free iOS or android app. The smartphone connects to the module via Bluetooth and displays engine parameters (MAP). This power module has four power settings loaded and identifiable with the LED light on the switch or smartphone app: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red). The SCORCHER BLUE module is Bluetooth 4.0 capable and can connect to most iOS or Android devices. Bluetooth connectivity allows control of the module from you mobile device without the need to run any wires through the firewall. The aFe POWER SCORCHER BLUE app is free on the APP Store and Google Play store and allows the smartphone device to become a handheld remote for the module. It also displays turbo boost gauge (MAP), allows you to customize each power mode, upgrade to the latest revision and even measure 0 to 60 ¼ mile times.

• Bluetooth Connectivity to your iOS or Android Smartphone to Adjust Power Modes, Custom Tune Power Modes, or Upgrade the Device to the Latest Version
• Four Power Position Settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red)
• Increase turbo boost to improve vehicle performance, efficiency and throttle response
• In-Cabin On-the-Fly Power Adjustments via LED light switch or Smartphone App
• Does Not Modify the ECU and Leaves No Trace (No Footprint)
• Next generation of plug & play Bluetooth power module

This Part Fits:

The Bully Dog GT Bypass Cable is an essential requirement for performance tuning on 2018 and newer Dodge RAM trucks equipped with the 6.7L Cummins diesel engine. Starting in the 2018 model year, a factory Security Gateway Module (SGM) was introduced to block the OBDII port from communicating with aftermarket devices. This bypass cable allows your Bully Dog GT tuner to circumvent the SGM, establishing a direct connection to the vehicle's CAN bus for ECM communication, data logging, and tuning.

• Required for all 2018-Up RAM 2500/3500 trucks with 6.7L Cummins engines
• Bypasses the factory Security Gateway Module (SGM/SGW)
• Enables full read/write capabilities for the Bully Dog GT tuner
• Direct plug-and-play installation into the factory harness
• Ensures stable communication for vehicle monitoring and calibration

Fits select 2013-2017 Ram 2500 and 3500 (6.7L).

This Bully Dog Unlock Cable is a necessary component for owners of 2013 and newer Cummins-powered Ram trucks who want to utilize the performance tuning capabilities of the Bully Dog GT Diesel. Because the engine control module (ECM) on these vehicles is locked from the factory, this specialized cable provides the essential physical link required to bypass the lock and enable the GT Diesel tuner to communicate with the vehicle's computer.

• Required for ECM unlocking on 2013-2017 6.7L Cummins engines
• Designed exclusively for use with the Bully Dog GT Diesel tuner
• Provides a secure, direct-fit connection to the vehicle diagnostic system
• Enables performance tuning, monitoring, and diagnostic functions

The Bully Dog BDX performance programmer delivers street-legal horsepower and torque gains in a compact, handheld device. Designed to bridge the gap between performance and compliance, this tuner features EO certification for emissions legality, ensuring it meets strict regulatory standards for street use.

Equipped with built-in Wi-Fi, the BDX allows for cloud-based tune delivery, so you can download the latest calibrations and firmware directly to the device without needing a PC connection. Beyond performance tuning, the BDX serves as a sophisticated digital gauge, monitoring critical engine parameters in real-time on its crisp, full-color display. It also functions as a diagnostic tool, allowing you to read and clear diagnostic trouble codes (DTCs) without a separate scanner.

• EO Certified for emissions compliance and street-legal performance
• Cloud-based tune delivery via integrated Wi-Fi connectivity
• Real-time monitoring and data logging of engine parameters
• Reads and clears diagnostic trouble codes (DTCs)
• Full-color display with customizable gauge layouts
• Direct connection to the factory OBDII port for easy installation

The Bully Dog Triple Dog Platinum GT functions as a high-performance engine tuner, monitor, gauge, and diagnostic device in a single compact unit. Engineered for select 1999-2016 Cadillac and Chevrolet models, this 4-in-1 tool allows you to optimize engine parameters for increased horsepower and improved fuel economy while providing real-time data on critical engine vitals.

This device features preloaded tunes that have undergone extensive testing to ensure vehicle safety and emissions compliance. It supports custom tuning, allowing users to load specialized tunes developed within Clean Air Act guidelines. Beyond performance, the GT serves as a powerful diagnostic tool, giving you the ability to read and clear diagnostic trouble codes (DTCs) without a trip to the mechanic.

• Fits select 1999-2016 Cadillac and Chevrolet models including Escalade, Avalanche, Camaro, Cruze, Express, and Silverado.
• 4-in-1 functionality: Tuner, Monitor, Gauge, and Diagnostic Tool.
• Real-time monitoring of multiple engine parameters on a single high-resolution screen.
• Preloaded performance and economy tunes optimized for gas engines.
• Read and clear diagnostic trouble codes (DTCs) with ease.
• Emissions compliant; all preloaded tunes satisfy Clean Air Act requirements.
• Supports custom tuning for advanced performance builds.

Fits select 1999-2014 Cadillac and Chevrolet vehicles, including Escalade, Silverado, Avalanche, Express, and Camaro.

The Bully Dog Triple Dog GT Gas Tuner and Gauge integrates four essential functions into one compact device: a performance engine tuner, a real-time monitor, a digital gauge display, and a diagnostic scanner. This 50-state legal unit allows you to optimize engine maps for increased horsepower and torque while maintaining emissions compliance. It also helps improve fuel economy by providing real-time feedback on driving habits.

The GT provides comprehensive insight into your vehicle's operation, with a customizable display capable of monitoring over 15 different parameters at a glance. As a diagnostic tool, it can read and erase Diagnostic Trouble Codes (DTCs), saving you trips to the technician. Installation is streamlined for the DIY enthusiast, typically requiring only 10 to 20 minutes to connect to the factory OBDII port. The device also supports free internet updates to ensure you have the latest software and vehicle calibrations.

• Four-in-one engine tuner, monitor, gauge, and diagnostic device
• Optimizes performance for increased horsepower and torque
• Real-time monitoring of over 15 vehicle parameters
• Reads and clears Diagnostic Trouble Codes (DTCs)
• 50-state emissions legal for street use
• Adjustable features including speed limiters
• Easy 10-20 minute installation via OBDII
• Free internet updates and upgrades

Fits 2024-2025 Chevrolet Silverado 2500/3500 HD (6.6L Duramax L5P).

The Banks Power Derringer High Output System is a dyno-calibrated inline performance tuner designed to provide significant horsepower and torque gains while maintaining factory engine safeguards. Unlike generic flash tunes, the Derringer works with the vehicle's ECU to optimize boost and fueling in real-time. This system includes the iDash Data Pro, providing a powerful interface to monitor critical engine parameters, clear diagnostic codes, and adjust power levels on the fly.

• Plugs into factory MAP and FRP sensors for seamless integration
• Active safety features include AutoRate and TransSafe to protect the drivetrain
• iDash Data Pro allows monitoring of over 300 parameters not found on the factory dash
• Six on-the-fly adjustable power levels
• Simple plug-and-play installation with no permanent modifications required
• Manufacturer Part Number: 67123-P

Fits 2023 Chevrolet Silverado 2500/3500 HD models equipped with the L5P 6.6L Duramax diesel engine.

The Banks Power Derringer High Output System is a sophisticated inline tuning solution designed to extract maximum safe performance from your L5P Duramax. Unlike generic tuners, the Derringer utilizes proprietary AutoRate and TransSafe technologies to monitor engine and transmission vitals in real-time. This ensures that additional horsepower and torque are only delivered when parameters like engine coolant temperature, exhaust gas temperature (EGT), and transmission slip are within safe operating margins.

This system is paired with the iDash Pro, a high-resolution digital monitor that serves as the command center for your truck. The iDash Pro allows you to toggle through power levels on the fly while monitoring over 200 engine parameters. Its compact design fits into a standard 52mm gauge pod, providing a clean, factory-integrated look while offering the ability to read and clear diagnostic trouble codes (DTCs).

• Plug-and-play installation using factory-style connectors
• Exclusive AutoRate technology adjusts power based on ambient conditions and engine health
• TransSafe drivetrain protection monitors transmission slip to prevent wear
• iDash Pro allows on-the-fly power level adjustments and data logging
• Interconnects with the Banks engine sensor network for precise fueling and boost control
• Clears codes and monitors 200+ parameters through the OBD-II port

This Banks Power cable adapter provides the vital communication link between your vehicle's factory diagnostic port and the PedalMonster throttle controller. By converting the standard OBD-II connection to the proprietary BanksBus III interface, this harness ensures stable power delivery and high-speed data transfer for precise throttle mapping.

• Designed specifically for use with Banks Power PedalMonster systems
• Converts standard OBD-II connection to BanksBus III protocol
• Heavy-duty connectors for a secure, vibration-resistant fit
• Simple plug-and-play installation into the factory OBD-II port

Whether you are replacing a damaged cable or completing a new installation, this adapter maintains the signal integrity required for the PedalMonster to function safely and effectively within your vehicle's electronic architecture.

The Banks Power B-Bus In-Cab 6-Pin Extension Cable provides an additional 4 feet of reach for your Banks electronics, allowing for flexible mounting of gauges and modules. Designed specifically for the Banks B-Bus architecture, this cable ensures a secure, high-speed data connection between your iDash SuperGauge, Derringer tuner, or other compatible peripherals.

This extension is essential for custom dashboard layouts or pillar-mounted gauge pods where the standard cable length is insufficient. It maintains signal integrity through high-quality 6-pin connectors, offering a reliable plug-and-play solution without the need for splicing or custom wiring.

• Product Type: B-Bus In-Cab Extension Cable
• Length: 4 Feet (1.2 Meters)
• Connector Type: 6-Pin B-Bus
• Compatibility: Banks iDash DataMonster, iDash SuperGauge, and Derringer Tuners
• Fitment: Universal application for all B-Bus equipped vehicles
• Installation: Direct plug-and-play integration

Fits 2024-2026 Toyota Tacoma models including SR, SR5, TRD Sport, TRD Off-Road, TRD PreRunner, Limited, Trailhunter, and TRD Pro.

The sPOD BantamX Touchscreen Kit provides a centralized power management solution for your Tacoma, allowing you to control multiple 12V accessories from a single, high-resolution digital interface. This vehicle-specific kit integrates the BantamX system and its touchscreen control panel directly into the cabin, matching the modern aesthetic of the factory displays while keeping switch controls within easy reach of the driver.

• Centralized Control: Consolidate wiring for auxiliary lights, lockers, compressors, and other electronics into one digital interface.
• BantamX Power Module: Features an expandable 8-circuit system with built-in circuit protection and high-current capacity.
• Touchscreen Interface: Programmable switches with customizable labels, momentary or latching functions, and real-time status indicators.
• Clean Installation: Includes vehicle-specific mounting hardware for the 2024-2026 Tacoma to ensure a factory-like fit and finish.

Monitor critical engine vitals with precision using the SCT Exhaust Gas Temperature (EGT) Sensor Kit. Designed specifically for use with SCT Livewire TS and X4 performance programmers, this kit allows you to view real-time temperature data directly on your device's display. Monitoring EGTs is essential for diesel and high-performance gasoline applications to prevent engine damage from lean conditions or excessive load under boost.

• Stainless steel EGT probe designed for long-term durability in extreme heat
• RFI shielded wiring ensures accurate data transmission without electronic interference
• Industry-standard Type-K connector and SCT Firewire connector for plug-and-play integration
• Encapsulated enclosure protects sensitive electronic components
• Dual ferrule compression fitting provides a secure, leak-free installation into the exhaust manifold or downpipe

Expand the data logging capabilities of your SCT handheld tuner with the SCT Performance 2-Channel Analog Input Cable. This specialized harness allows you to interface external 0-5V analog sensors—such as wideband oxygen sensors, EGT probes, or fluid pressure transducers—directly with your SCT device for real-time monitoring and comprehensive data recording.

By integrating external sensor data into your data logs, you gain a complete picture of your vehicle's performance, which is essential for safe and precise custom tuning and diagnostic analysis. This cable provides a reliable connection for tracking critical engine parameters that are not typically available through the factory OBD-II port alone.

• Enables monitoring and recording of external analog sensor data
• Dual-channel input supports two independent sensor signals
• Directly compatible with SCT X3, SF3, Livewire, and TS-Custom applications
• Essential accessory for accurate wideband air/fuel ratio logging and performance tuning

The SCT Performance USB High Speed Pass-Through Datalogging Cable is a critical component for enthusiasts and professional tuners who require real-time engine monitoring and accurate data collection. This cable facilitates a high-speed connection between your vehicle's OBDII port and your tuning software or handheld device, ensuring low-latency data transfer for high-resolution logging.

Built to handle the rigors of both the dyno cell and the track, this cable is a direct replacement for lost or damaged SCT datalogging leads. Its pass-through architecture allows for seamless communication, making it an essential tool for troubleshooting performance issues or refining custom powertrain calibrations.

• High-speed USB interface for rapid, stable data transmission
• Pass-through design optimized for real-time datalogging and diagnostics
• Heavy-duty construction with reinforced connectors for long-term durability
• Compatible with SCT Performance handheld programmers and custom tuning software
• Direct replacement for original SCT datalogging hardware

Fits select 2011-2020 Ford and Lincoln gas and diesel vehicles, including F-150, F-250/F-350 Super Duty, Mustang, Ranger, and Navigator.

The SCT X4 Power Flash Programmer delivers dyno-proven performance tunes directly to your vehicle's ECU for immediate gains in horsepower and torque. This handheld tuner features a full-color LCD display that allows you to monitor real-time engine data through customizable gauges. Beyond preloaded tunes, the X4 stores up to 10 custom tune files from your preferred calibrator, giving you precise control over your vehicle’s performance parameters and aftermarket modifications.

Installation is straightforward via the OBDII port, requiring no tools for a basic flash. The device also functions as a powerful diagnostic tool, allowing you to read and clear Diagnostic Trouble Codes (DTCs) without a separate scanner. User-adjustable options enable you to fine-tune settings to suit your specific driving needs and hardware setup.

• Preloaded, dyno-proven performance tunes for gas and diesel engines
• Stores up to 10 custom tune files
• Customizable full-color LCD screen for real-time data monitoring
• Integrated diagnostic tool to read and clear DTCs
• User-adjustable tune parameters
• EO Certified for emissions compliance

Fits select 1992-2019 Ford vehicles including F-150, Explorer, Expedition, E-Series, and Crown Victoria.

This SCT Performance replacement OBDII cord is a direct-fit solution for the SCT X4 Performance Programmer. Designed to replace a damaged, frayed, or lost original cable, this cord restores the essential communication link between your hand-held tuner and the vehicle's ECU. Whether you are flashing a new tune, monitoring live engine data, or clearing diagnostic trouble codes (DTCs), this cable ensures a stable, high-speed connection through the factory OBDII port.

• Direct replacement for the original SCT X4 programmer cable
• High-quality shielding to prevent signal interference during the tuning process
• Precision-molded OBDII and programmer-side connectors for a secure, lock-in fit
• Essential for data logging and vehicle diagnostics
• Compatible with standard Ford OBDII protocols from 1992 to 2019

Fits select 1996-2014 Ford Mustang models.

The SCT Performance X4 Power Flash Window Mount provides a secure, accessible location for your handheld programmer, allowing you to take full advantage of its real-time data monitoring capabilities. By mounting the device to the windshield, you can easily view digital gauges and engine parameters without the tuner sliding on the dashboard or console during spirited driving.

• Heavy-duty suction cup provides a firm attachment to the windshield
• Custom-molded cradle designed specifically to fit the SCT X4 chassis
• Adjustable arm allows for optimal positioning for visibility and reach
• Ideal for monitoring PIDs and data logging during track or street use

Fits select 1992-2005 Ford Aerostar, Bronco, Contour, Crown Victoria, E-Series, Escape, Escort, Excursion, Expedition, and Explorer (3.0L).

The SCT Performance Eliminator 4-Bank E-Prom Chip is a versatile tuning solution for Ford enthusiasts running EEC-IV and EEC-V engine control modules. Whether you are optimizing a dedicated tow rig or a nitrous-fed street machine, this multi-program chip allows you to store and easily switch between different tune files to suit your driving conditions. Built with a focus on reliability and performance, the chip also features an integrated anti-theft mode to provide an extra layer of security for your vehicle.

SCT designs these components with strict adherence to the Clean Air Act, ensuring that your tuning remains emissions-compliant without deleting factory systems. The chips are calibrated based on SCT’s extensive background in OE powertrain software, providing functional and powerful tuning options for vintage and late-model Ford platforms.

• 4-Bank multi-program design for storing up to four custom tune files
• Directly compatible with Ford EEC-IV and EEC-V PCMs
• Integrated vehicle anti-theft mode for enhanced security
• Ideal for nitrous, towing, or forced induction applications
• Easily switchable between tune files for different driving needs
• Complies with Clean Air Act standards; will not modify or delete emissions systems
• User-adjustable options for fine-tuning performance parameters