This 6-meter ARB airline serves as a direct replacement or extension for ARB pneumatic systems. With a 6.0mm outer diameter and a 3.0mm inner diameter, it is engineered to handle the pressure requirements of air-actuated accessories and locker manifolds. The 6M length provides ample tubing for clean routing along the vehicle chassis, ensuring a consistent air supply from your compressor to the differential or actuator.

• Dimensions: 6.0mm OD x 3.0mm ID
• Length: 6 Meters
• Application: Pneumatic air systems and locker engagement
• Construction: High-pressure airline tubing

This ARB spare 6mm push-in air fitting is designed for low-pressure pneumatic applications, providing a secure and leak-free connection for nylon air lines. It is an essential component for maintaining or expanding ARB air locker systems and on-board air compressors where 6mm tubing is utilized.

• Fits 6mm outside diameter (OD) nylon air lines
• Push-in style design for quick, tool-free installation and maintenance
• Rated for low-pressure (LP) pneumatic circuits
• Genuine ARB component for reliable performance in off-road environments

The ARB High Performance Bulkhead Kit provides a reliable, leak-free solution for routing pneumatic lines through axle housings, firewalls, or other rigid barriers. This O-ring type fitting is engineered specifically for use with ARB Air Locker systems and air compressors, ensuring a secure transition between different line diameters without pressure loss.

• Transitions 6mm external air supply line to 3.5mm internal line
• High-performance O-ring seal design prevents air leaks in demanding conditions
• Constructed from durable materials for off-road and high-pressure environments
• Essential component for Air Locker installations and custom pneumatic routing
• Includes necessary hardware for a complete bulkhead pass-through

This ARB Bulkhead Kit is designed to provide a secure, leak-free transition for your Air Locker air line through the differential housing. This specific O-ring style kit allows you to adapt a 5mm external nylon air line to a 3.5mm internal seal housing, ensuring consistent pneumatic pressure for reliable locker engagement.

• Replaces or upgrades standard bulkhead fittings for ARB Air Locker systems
• Transitions 5mm external air line to 3.5mm internal components
• O-ring type sealing mechanism prevents pressure loss at the housing entry point
• Constructed from high-strength materials to withstand harsh off-road environments and gear oil exposure
• Includes bulkhead body, O-rings, and necessary compression hardware

Vibrant Performance plastic flare plugs are essential components for maintaining system cleanliness during assembly, storage, or transport. These plugs provide a temporary seal to prevent dust, debris, and moisture from contaminating open fuel, oil, or coolant lines and hoses.

• Size: AN -6
• Configuration: Male Flare Plug
• Compatibility: Fits any 37-degree AN flare and straight-cut AN ports
• Material: Durable plastic construction
• Application: Designed for protecting open plumbing lines and ports during maintenance or storage

Vibrant Performance swivel adapters solve complex plumbing challenges in high-performance fuel, oil, and coolant systems. This male -6 ORB to male -6 ORB fitting provides a 360-degree swivel connection, allowing for precise alignment of lines and components in tight engine compartments where rigid fittings often struggle with port orientation.

• Fitting Type: Swivel Adapter
• Thread A: Male -6 ORB (O-Ring Boss)
• Thread B: Male -6 ORB (O-Ring Boss)
• Material: Lightweight 6061 aluminum
• Finish: Black anodized for superior corrosion and wear resistance
• Function: Allows for 360-degree rotation to simplify plumbing in cramped spaces
• Compatibility: Suitable for fuel, oil, and coolant applications

The Vibrant Performance Swivel Adapter provides a high-pressure, leak-free connection when transitioning between different O-ring Boss (ORB) port sizes. This fitting features a male -8 ORB end and a -6 ORB end, making it essential for custom plumbing in high-performance fuel, oil, or cooling systems. The integrated swivel design allows for 360-degree orientation, ensuring you can route lines in tight engine compartments without risking hose fatigue or thread binding during installation.

• Port A: Male -8 ORB (O-Ring Boss)
• Port B: -6 ORB (O-Ring Boss)
• Integrated swivel design for precise hose alignment in cramped spaces
• Precision-machined threads for consistent engagement and a secure seal
• Suitable for high-pressure fuel, oil, and coolant applications

This Vibrant Performance swivel adapter simplifies complex plumbing by allowing for precise orientation of fluid lines in tight engine bays. Designed to thread directly into -8 AN O-Ring Boss (ORB) ports, the swivel mechanism provides the flexibility needed to clock your fittings for optimal routing without compromising seal integrity.

• Fitting Type: Swivel Adapter
• Port A: Male -8 AN ORB
• Port B: Male -8 AN ORB
• Material: 6061-T6 Aluminum
• Finish: Black Anodized for corrosion resistance
• Suitable for fuel, oil, and coolant systems

This Vibrant Performance swivel adapter facilitates a reliable, leak-free transition between -10 ORB and -8 ORB ports. Engineered for high-performance fluid delivery systems, the integrated swivel mechanism allows for precise clocking and easier installation in confined engine bays or chassis locations where fixed fittings may cause alignment issues.

• Fitting Style: Swivel Adapter
• Side A: Male -10 ORB (O-Ring Boss)
• Side B: Male -8 ORB (O-Ring Boss)
• Construction: Designed for maximum durability and compatibility with most automotive fluids
• Sealing Type: O-ring interface ensures a secure seal even under high-pressure conditions

This Vibrant Performance swivel adapter provides a secure, leak-proof connection between -12 ORB and -10 ORB ports. Designed for high-performance fluid delivery, the O-ring boss (ORB) interface ensures a positive seal for fuel, oil, and coolant systems without the need for messy thread sealants or Teflon tape.

The integrated swivel design is essential for plumbing in confined engine bays, allowing you to precisely clock the fitting for optimal hose routing before final tightening. This functionality reduces stress on lines and ensures a professional, clean installation.

• Fitting Type: Swivel Adapter
• Connection A: -12 Male ORB (O-Ring Boss)
• Connection B: -10 Male ORB (O-Ring Boss)
• Construction: High-strength aluminum for fluid compatibility
• Applications: Suitable for fuel, oil, and cooling system plumbing

This Vibrant Performance swivel adapter provides a reliable, leak-free connection between two female ORB ports. Designed for high-performance fluid systems, the swivel functionality allows for easier installation and precise alignment in tight engine bays or chassis locations where fixed fittings may cause plumbing or routing issues.

• Fitting Type: Swivel Adapter
• Thread Size A: -12 AN Male ORB (O-Ring Boss)
• Thread Size B: -12 AN Male ORB (O-Ring Boss)
• Seal Type: O-Ring Seal

By utilizing O-ring boss (ORB) threads, this adapter ensures a positive seal without the need for thread sealant, reducing the risk of system contamination in fuel, oil, or cooling applications.

This Vibrant Performance one-way check valve is engineered to provide reliable flow control in automotive plumbing systems. Featuring 5/8-inch barbed ends, it ensures fluid or air moves in a single direction while effectively preventing backflow. It is a critical component for maintaining system pressure and protecting sensitive hardware in vacuum, ventilation, or fluid management setups.

• Inlet/Outlet Size: 5/8" (15.8mm) barbed ends
• Function: Reliable one-way flow/backflow prevention
• Installation: Barbed design for secure hose fitment and easy integration
• Application: Ideal for vacuum lines, PCV systems, and fluid ventilation

Maintain precise flow control and prevent damaging backflow with the Vibrant Performance 1/2" Barbed One-Way Check Valve. This component is essential for automotive plumbing systems where maintaining directional flow is critical for performance and component longevity. By allowing flow in only one direction, it protects sensitive sensors and maintains vacuum or pressure levels in dedicated lines.

• Prevents backflow in vacuum, air, and fluid systems
• 1/2" barbed ends provide a secure interface for standard 1/2" ID hoses
• Compact, inline design allows for easy installation in tight engine bays
• Engineered for reliable operation in high-performance environments
• Ideal for PCV systems, brake booster lines, and custom plumbing applications

Ensure precise fluid or air direction with the Vibrant Performance 3/8in Barbed Check Valve. Designed to prevent backflow in vacuum, air, or low-pressure fluid systems, this one-way valve is a critical component for maintaining system integrity and protecting sensitive hardware from reverse pressure or fluid migration.

• Inlet/Outlet Size: 3/8in Barbed
• Function: Reliable one-way flow control to prevent backflow
• Installation: Secure barbed ends for direct fitment into rubber or silicone hoses
• Compatibility: Suitable for vacuum lines, PCV systems, and non-corrosive fluid management

This Vibrant Performance one-way check valve is engineered to prevent backflow and maintain pressure in low-pressure pneumatic and fluid systems. It is a critical component for custom vacuum routing, boost control lines, and fuel vapor systems where directional flow is required to protect sensitive components and ensure consistent engine performance.

• 5/16in (8mm) barbed inlet and outlet ends for secure hose retention
• Precision one-way flow design to eliminate reverse pressure
• Compact profile allows for installation in tight engine bay configurations
• Ideal for vacuum, air, and non-corrosive fluid applications

This genuine TiAL Sport MV-S plug is engineered to seal unused air or water cooling ports on the MV-S 38mm external wastegate. Maintaining a leak-free seal is critical for consistent boost control and preventing coolant loss in water-cooled configurations. Whether you are simplifying your vacuum line routing or running a dry setup without water cooling, this port plug provides the secure, high-pressure seal required for forced induction environments.

• Fits TiAL Sport MV-S 38mm external wastegates
• Seals unused air signal or water cooling ports
• Precision-machined construction for reliable sealing under high temperatures and pressures
• Essential for custom turbocharger plumbing and boost control setups
• Genuine TiAL Sport replacement component

Maintain a consistent seal and prevent pressure loss with a genuine TiAL Sport Blow Off Valve O-Ring. Over time, heat cycles and environmental exposure can degrade rubber seals, leading to boost leaks that compromise turbocharger efficiency and throttle response.

This replacement O-ring is designed specifically for TiAL Sport BOVs to ensure precise fitment and reliable performance under high-pressure conditions. Whether you are performing a routine rebuild or addressing a known leak, using genuine TiAL components ensures compatibility with your existing hardware and flange surfaces.

• Genuine TiAL Sport replacement component
• Engineered for high-pressure pneumatic sealing
• Resistant to engine bay heat and common automotive fluids
• Essential for routine BOV maintenance and leak prevention

The TiAL Sport MVR 44mm Valve Seat is a precision-machined replacement component engineered specifically for the MVR external wastegate series. As the primary sealing interface between the wastegate valve and the body, this seat is critical for maintaining precise boost control and preventing exhaust leaks that can lead to boost creep or inconsistent manifold pressure.

• Direct replacement for the valve seat included with all TiAL MVR 44mm external wastegates
• Precision-machined from high-temperature resistant alloys to prevent galling and warping under extreme thermal loads
• Ensures a positive seal for accurate wastegate actuation and boost management
• Essential for wastegate rebuilds or when swapping wastegates between different manifold setups
• Manufacturer Part Number: MVR Valve Seat

This TiAL Sport 38mm Valve Seat is a direct replacement component engineered specifically for the TiAL F38 external wastegate. As a critical interface within the wastegate body, the seat provides the precision sealing surface required for the valve to maintain accurate boost pressure. Over time, extreme exhaust temperatures and carbon accumulation can pit or wear the original seat, leading to exhaust leaks and inconsistent boost control.

• Fits TiAL Sport F38 (38mm) external wastegates
• Precision machined to ensure a leak-free seal and reliable valve operation
• Direct-fit replacement for worn, pitted, or heat-damaged factory seats
• High-temperature resistant construction for durability in high-performance exhaust environments

The TiAL Sport 10mm Double Air Fitting is a precision-engineered component designed for reliable pneumatic connections within high-performance turbocharging systems. These fittings are essential for routing clean vacuum and boost signals to your wastegate or blow-off valve, providing a secure connection that resists leaks under high-pressure conditions.

• Genuine TiAL Sport engineering for precise fitment and durability
• 10mm sizing compatible with standard pneumatic lines and hoses
• Double-port configuration facilitates complex vacuum routing or dual-port control setups
• Ideal for use with TiAL wastegates and BOVs requiring pneumatic signal distribution
• Constructed to withstand the high-heat and vibration of a performance engine bay

This genuine TiAL Sport 10mm air fitting provides a secure, leak-free connection for vacuum and boost signal lines. Engineered for high-heat environments, this fitting is a direct replacement or additional port for TiAL wastegates and blow-off valves, ensuring precise pressure delivery to your forced induction control components.

• Manufacturer: TiAL Sport
• Size: 10mm
• Application: Compatible with various TiAL wastegates and BOVs
• Function: Vacuum/Boost signal port
• Quantity: Single (1) fitting

Constructed to handle high-pressure duty cycles, this fitting replaces worn or damaged hardware to maintain the integrity of your boost control system. Whether you are plumbing a new setup or refreshing an existing one, TiAL hardware provides the reliability required for performance applications.

Fits select 2019-2024 Ram 2500 and 3500 trucks (6.7L).

The Banks Power MAP Sensor Spacer Kit is engineered to resolve a common issue on the 6.7L Cummins: soot-clogged sensors. In the factory configuration, the Manifold Absolute Pressure (MAP) sensor is positioned directly in the path of carbon-heavy intake air, leading to rapid buildup that can cause inaccurate boost readings, erratic engine performance, and frequent check engine lights.

This kit relocates the sensor out of the direct soot stream while maintaining a perfect seal and precise pressure measurement. By moving the sensor away from the primary carbon path, you ensure the ECU receives clean, accurate data for better fueling and turbocharger response.

• Prevents carbon and soot accumulation on the sensitive MAP sensor tip
• Maintains factory pressure signal integrity for optimal performance
• Extends the service life of the sensor and reduces maintenance intervals
• Precision-machined construction for a leak-free fitment
• Direct-fit installation with included mounting hardware

Fits 2017-2024 Chevrolet Silverado and GMC Sierra 2500/3500 models equipped with the 6.6L Duramax L5P diesel engine.

Soot buildup is a recurring issue for the L5P Duramax, frequently clogging the MAP (Manifold Absolute Pressure) sensor. When the sensor is coated in carbon from the EGR-laden intake air, it provides inaccurate boost readings, which can lead to reduced fuel economy and sluggish performance. This Banks Power MAP Sensor Relocation Kit solves the problem by moving the sensor out of the direct path of the soot, keeping it clean for longer and ensuring the ECU receives precise data.

• Prevents soot and carbon accumulation on the sensor tip for consistent performance
• Maintains factory sensor accuracy and helps avoid EGR-related trouble codes
• Relocates the sensor to a cleaner environment while utilizing factory mounting logic
• Durable hardware designed to withstand extreme under-hood temperatures
• Simple bolt-on installation requires no permanent modifications to the engine

Fits 2023-2024 Chevrolet (6.6L).

This Banks Power MAP Sensor Relocation Kit is engineered specifically to reposition the lower manifold absolute pressure sensor on 2023-2024 Chevrolet 6.6L engines. Relocating the sensor is a common requirement when installing aftermarket components or optimizing the intake path to ensure the ECU receives accurate pressure readings without interference.

• Designed specifically for the lower MAP sensor location
• Maintains factory sensor functionality and signal integrity
• Compatible with 2023-2024 Chevrolet 6.6L models
• Engineered for long-term durability in high-heat engine environments
• Includes necessary hardware for the relocation process

Fits select 2007-2018 Ram 2500 and 3500 trucks (6.7L).

The Banks Power TMAP Relocation Kit is designed to improve the reliability and accuracy of your engine's Temperature/Manifold Absolute Pressure readings. In the factory configuration, the TMAP sensor is often subjected to significant soot and oil vapor accumulation, which can lead to fouled sensors and incorrect data being sent to the ECM. This kit provides the necessary components to relocate the sensor to a cleaner stream or optimized position, ensuring your 6.7L Cummins maintains peak performance and efficiency.

• Prevents TMAP sensor fouling from soot and oil residue
• Ensures accurate boost and intake air temperature data for the ECM
• High-quality wiring harness extensions and connectors for a secure electrical interface
• Engineered for a precise fit on 2007-2018 Ram 6.7L heavy-duty applications
• Durable mounting hardware included for a professional-grade installation

Fits select 2020-2024 Ford trucks equipped with the 6.7L Power Stroke diesel engine.

On the Ford 6.7L engine, the Manifold Absolute Pressure (MAP) sensor is frequently subjected to heavy carbon and soot accumulation as a byproduct of the Exhaust Gas Recirculation (EGR) system. This buildup can lead to sluggish throttle response, inaccurate boost pressure readings, and decreased fuel efficiency. The Banks Power MAP Sensor Spacer Kit addresses this issue by relocating the sensor further away from the direct path of the soot-heavy intake stream.

By significantly reducing the rate of clogging, this spacer ensures the ECU receives clean, accurate data for optimal engine management. This kit is a simple, effective solution for diesel owners looking to extend the service intervals of their MAP sensor while maintaining consistent engine performance.

• Prevents carbon and soot buildup on the MAP sensor tip
• Ensures accurate boost pressure readings for the ECU
• Reduces maintenance frequency and sensor cleanings
• Includes all necessary mounting hardware for a direct installation
• CNC-machined for precise fitment

Fits 2011-2019 Ford F-250, F-350, F-450, and F-550 Super Duty (6.7L).

The Banks Power MAP Sensor Spacer Kit addresses a frequent maintenance headache for 6.7L Power Stroke owners: MAP sensor coking. In the factory configuration, the sensor is positioned directly in the path of EGR-recirculated soot and particulates. Over time, this buildup fouls the sensor, leading to inaccurate boost readings, decreased fuel economy, and potential check engine lights. This kit spaces the sensor back from the primary intake stream, significantly reducing soot accumulation while maintaining the integrity of the pressure signal.

• Protects the MAP sensor from soot buildup and EGR coking
• Maintains accurate manifold absolute pressure readings for the ECM
• Reduces the frequency of required sensor cleanings
• Precision-machined spacer ensures a secure, leak-free fit
• Includes all necessary hardware for a straightforward bolt-on installation

Protect your engine's TMAP sensor from performance-robbing soot and oil buildup with the Banks Power TMAP Sensor Spacer Kit. This component is engineered specifically for the Duramax L5P (6.6L) to address the common issue of sensor fouling caused by EGR-related carbon deposits in the intake stream.

By pulling the sensor back from the direct path of the intake air, this spacer significantly reduces the amount of debris that can accumulate on the sensor element. This ensures the ECU continues to receive accurate manifold absolute pressure and temperature data, preventing the erratic performance or "limp mode" conditions often associated with a clogged sensor.

• Prevents TMAP sensor fouling and carbon clogging
• Maintains precise manifold pressure and temperature readings
• Durable, precision-machined construction for a leak-free seal
• Direct-fit installation with included hardware
• Specifically designed for the Duramax L5P (6.6L) engine

This Russell Performance adapter fitting provides a secure, leak-free connection between -3 AN hose ends and SAE-threaded components. Designed for plumbing high-pressure fluid systems, these fittings are essential for connecting hoses to fuel pumps, oil pumps, filters, and other critical engine accessories.

Precision machined from steel, this adapter features Russell’s proprietary Endura finish. This specialized coating delivers the bright, polished appearance of stainless steel while providing exceptional corrosion resistance and durability for long-term engine bay exposure.

• Inlet/Outlet Size: -3 AN to SAE Adapter
• Material: Precision-machined steel for high-pressure integrity
• Finish: Endura (bright stainless steel appearance)
• Compatible with a wide variety of standard, metric, and pipe thread components
• Manufacturer Part Type: Adapter Fitting

Maintain the integrity of your suspension system with the King Shocks 2.5 Performance Race (PR) series shaft guard. This genuine replacement component is designed to shield the precision-ground piston shaft from the harsh realities of off-road terrain, including flying rocks, roost, and debris that can cause pitting, nicks, or premature seal failure.

Constructed from impact-resistant materials, this guard is a critical service item for racers and enthusiasts looking to protect their investment. It installs directly onto King 2.5 PR series shocks, providing a sacrificial layer that preserves the smooth surface finish of the shaft for consistent damping performance and long-term reliability.

• Fits King Shocks 2.5 Performance Race (PR) series shocks
• Protects piston shafts from pitting, debris, and corrosion
• Durable construction built to withstand high-velocity impacts
• Genuine King Shocks replacement part
• Designed for Performance Race shock configurations