Fits 2021-2026 Tesla Model S, including Base, Long Range, Long Range Plus, Performance, and Plaid models.

Rally Armor UR (polyurethane) mud flaps provide superior protection for your Tesla's finish, engineered to perform in extreme environments where vinyl and rubber often fail. Unlike traditional materials that tend to curl or wear over time, these flexible urethane flaps maintain their form and integrity through both blistering heat and freezing temperatures.

This UR series kit offers comprehensive 4-corner protection against road salt, spray, gravel, and grime that can prematurely damage your vehicle's paint. The polyurethane construction is naturally UV-resistant and highly abrasion-resistant, ensuring long-lasting durability. Installation is designed for ease and vehicle preservation, utilizing a no-drill process that avoids permanent modifications to your factory bodywork.

• Manufacturer Part Number: MF101-UR-BLK-MBK
• Material: Premium UR Polyurethane
• Finish: Black with Metallic Black Logo
• Installation: No drilling required
• Kit Contents: Complete set of 4 mud flaps and all necessary mounting hardware
• Properties: UV-resistant and temperature stable

Husky Liners(R) Wheel Well Guards leave no room for rust or wear. They're an unwavering barrier rocks, mud, rocks, snow and salt that's easy to install in just a few minutes---lasting protection for life. Designed to shed grit and debris, while giving your vehicle amped up looks.

• Husky Liners Wheel Well guards give you super-tough impact-resistant, all-weather protection behind every wheel. It's built to stand up to whatever the road kicks up.
• When we say it's "guaranteed for life" that is exactly what we mean. No hassles, no guff. If you have a problem with this or any Husky product, we'll replace it.
• Husky Liners Wheel Well Guards Give You Super-Tough Impact-Resistant/ All-weather Protection Behind Every Wheel
• Our durable, impact resistant all-weather thermoplastic material holds up to whatever the road spits at it.
• Our Durable/Impact Resistant All-Weather Thermoplastic Material Holds Up To Whatever The Road Spits At It
• It's easier than ever to keep your wheel wells looking shiny and new. Just spray 'em down and drive off.
• Its Easier Than Ever To Keep Your Wheel Wells Looking Shiny And New/Just Spray Them Down And Drive Off
• No Hassles/No Guff/If You Have A Problem With This Or Any Husky Product/We Will Replace It
• Give your truck that amped up, clean look that's easy to install in just a few minutes.
• Give Your Truck That Amped Up/Clean Look Thats Easy To Install In Just A Few Minutes
• When We Say Its Guaranteed For Life That Is Exactly What We Mean
• Its Built To Stand Up To Whatever The Road Kicks Up
• Proudly made in the USA.
• Proudly Made In The USA

This Part Fits:

It's the perfect match for your fender, more than a match for anything the road kicks up. Its nail-tough thermoplastic construction delivers the ultimate in impact resistance plus, the added invincibility of Husky Shield(R). Husky Mud Guards are available in single or dually (factory tire) width, proudly made in the USA. Guaranteed for life.

• Husky Mud Guards deliver full-tread protection against gravel, mud, snow, salt and all manner of muck. Available in single or dually factory-width tires. Legendary Husky durability only comes in full size.
• When we say it's "guaranteed for life" that is exactly what we mean. No hassles, no guff. If you have a problem with this or any Husky product, we'll replace it.
• Our durable, all-weather, impact-resistant, thermoplastic construction is built to withstand virtually anything. So gravel and grit will ever spoil your trip.
• No-drilling required. On specific models, Mud Guards use existing OEM mounting points for fast-easy attachment. So you'll be off-roading in no time.
• Our exclusive Husky Shield(R) Film is easy to install and forms an invisible protective barrier between the Mud Guard and the vehicle's paint.
• Our Mud Guards feature FormFit Design(TM) tailored to perfectly match your fenders. It's no-quit Husky protection, custom fit to your truck.
• Our Durable/All-Weather/Impact-Resistant/Thermoplastic Construction Is Built To Withstand Virtually Anything
• No-Drilling Required/On Specific Models/Mud Guards Use Existing OEM Mounting Points For Fast-Easy Attachment
• Available In Single Or Dually Factory-Width Tires/Legendary Husky Durability Only Comes In Full Size
• Husky Mud Guards Deliver Full-Tread Protection Against Gravel/Mud/ Snow/Salt And All Manner Of Muck
• And Forms An Invisible Protective Barrier Between The Mud Guard And The Vehicles Paint
• The sleek style of our FormFit Mud Guards give your ride a factory look, only better.
• The Sleek Style Of Our Formfit Mud Guards Give Your Ride A Factory Look/Only Better
• Our Mud Guards Feature Formfit Design[TM] Tailored To Perfectly Match Your Fenders
• Its No-Quit Husky Protection/Custom Fit To Your Truck
• Our Exclusive Husky Shield[R] Film Is Easy To Install
• So Gravel And Grit Will Ever Spoil Your Trip
• So You Will Be Off-Roading In No Time
• Proudly made in the USA.
• Proudly Made In The USA

This Part Fits:

Fits select 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited trims.

Shield your Jeep’s cowl from the inevitable impact of trail debris, low-hanging brush, and gravel. Bushwacker Trail Armor components are designed to protect the most vulnerable sections of your vehicle’s body while adding a rugged, custom-styled finish. These cowl covers provide a physical barrier between your factory paint and the hazards of the trail, preventing scratches and dents before they occur.

Constructed from high-durability TPO (Thermoplastic Olefin) material, these covers are engineered to withstand UV exposure and temperature extremes without warping or chalking. The OEM-style matte black finish is designed to integrate seamlessly with your factory trim. Installation is a straightforward process requiring no drilling or permanent modification; the covers secure to the body using a combination of mechanical clips and 3M automotive-grade high-bond tape for a fitment that remains stable through high-speed vibrations and trail impacts.

• Material: Rugged TPO (Thermoplastic Olefin) construction
• Finish: OEM Matte Black
• Installation: No-drill design using 3M automotive-grade adhesive and clips
• Protection: Guards factory sheet metal against brush, limbs, and debris
• Warranty: Limited Lifetime Warranty

Protect the vulnerable undercarriage of your 2017-2023 Toyota Tacoma with the Artec Industries Full Skid Plate System. This comprehensive armor package replaces thin factory guards with heavy-duty protection designed to withstand direct impacts from rocks and trail obstacles that can cause catastrophic damage to drivetrain and suspension components.

• Vehicle Fitment: Specifically engineered for 2017-2023 Toyota Tacoma 3rd Gen models.
• A-Arm Protection: Guards the front lower control arms from debris and helps the suspension slide over obstacles rather than snagging.
• Full Bellypan: Provides continuous coverage for the engine, transmission, and transfer case, minimizing the risk of punctures or casing cracks.
• Fuel Tank Skid: A dedicated shield for the fuel tank, ensuring your fuel supply remains secure during technical crawls.
• High-Clearance Design: CNC-cut and formed to follow the chassis lines, maintaining maximum ground clearance while providing a smooth sliding surface.

Each component is designed for precise fitment using existing mounting points where possible, ensuring a secure installation that provides the peace of mind needed for serious off-roading.

Fits 2017-2023 Toyota Tacoma models (3rd Gen).

The Artec Industries Bellypan Skid Plate provides critical underbody protection for your truck's mid-section. Engineered to shield the transmission and transfer case area from impacts, this bellypan is an essential upgrade for off-roaders navigating rocky terrain or technical trails where factory shielding is often insufficient. It provides a smooth surface to slide over obstacles, preventing snagging or damage to vital drivetrain components.

• Specifically designed for 2017-2023 Toyota Tacoma (3G) platforms
• Shields the central undercarriage from rocks, stumps, and trail debris
• High-clearance design maintains maximum breakover angle
• Heavy-duty construction for superior impact resistance compared to stock components

Fits 2021-2025 Jeep Wrangler JLU 4xe.

Protect your Jeep's vulnerable undercarriage from trail obstacles with the Artec Industries Engine Oil Skid Plate. This heavy-duty armor is designed specifically for the JLU 4xe platform, providing critical coverage for the engine oil pan where factory protection is often insufficient. To streamline routine maintenance, this skid plate features a built-in oil door, allowing you to perform oil changes without the labor-intensive process of removing the entire skid system.

• Specifically engineered for 2021-2025 Jeep Wrangler JLU 4xe models
• Integrated oil door provides easy access for maintenance without skid removal
• Provides heavy-duty protection against rocks, stumps, and debris
• Designed to maintain maximum ground clearance for off-road performance
• Direct fitment for the engine oil pan area

Fits 2018-2020 Jeep Wrangler JL Sahara 4-Door (3.6L).

Shield your undercarriage from trail damage with the Artec Industries Full Bellypan. Engineered for the 4-door Jeep Wrangler JL Sahara, this skid plate system provides comprehensive protection for critical driveline components, including the engine oil pan, transmission, and transfer case. The aluminum construction offers a superior strength-to-weight ratio, ensuring heavy-duty impact resistance without the significant weight penalty of steel armor.

This bellypan features a dedicated oil door, allowing for routine maintenance and oil changes without the need to remove the entire skid plate assembly. The design maintains high ground clearance while providing a smooth surface to slide over obstacles.

• Full underbody protection for engine, transmission, and transfer case
• Lightweight, high-strength aluminum construction
• Integrated oil door for easy maintenance access
• Specifically designed for 4-door Sahara trim levels
• Application: 2018-2020 Jeep Wrangler JL (4-Door)
• Engine: 3.6L

Fits 2022-present Ford Ranger and Everest (Non-US Models).

Protect your vehicle's vital drivetrain components from off-road hazards with ARB Ultralite Polymer Underbody Armor. Specifically engineered for the next-generation Ranger and Everest chassis, this protection system utilizes a high-strength polymer construction to provide essential impact resistance without the significant weight penalty associated with traditional steel plates. The Ultralite series offers a durable, corrosion-proof solution for overlanders and off-roaders looking to shield their chassis from rocks, stumps, and trail debris.

• Manufactured from high-strength, impact-resistant Ultralite polymer
• Lightweight construction maintains vehicle payload and suspension performance
• Shields critical underbody and drivetrain components from mechanical damage
• Corrosion-resistant material designed for harsh off-road environments
• Precise fitment for 2022+ Ford Ranger and Everest (Non-US application)

Fits 2023-2025 Chevrolet Colorado and GMC Canyon.

Shield your drivetrain from costly trail damage with the ICON Vehicle Dynamics Transmission Skid Plate. Designed specifically for the latest generation Colorado and Canyon chassis, this skid plate provides essential underbody protection for the transmission pan and sensitive drivetrain components. Whether you are navigating technical rock gardens or clearing brush on the trail, this armor prevents impacts from compromising your vehicle's mobility.

• Precision-engineered for 2023-2025 Chevrolet Colorado and GMC Canyon models
• Provides a rugged barrier against rocks, stumps, and off-road debris
• Strategic design maintains maximum ground clearance for off-road performance
• Direct bolt-on installation utilizing factory mounting points for a secure fit
• Essential protection for overlanding and heavy trail use

Fits 2023-2025 Chevrolet Colorado and GMC Canyon models.

Shield your truck's vulnerable front differential from rocks, stumps, and trail debris with this heavy-duty ICON Front Differential Skid Plate. Designed specifically for the redesigned mid-size GM platform, this skid plate provides essential underbody protection for off-roaders navigating technical terrain where the factory differential housing is most at risk of impact damage.

• Protects the front differential from direct impacts and trail obstacles
• Engineered for high-clearance protection without sacrificing ground clearance
• Constructed for maximum durability during off-road use
• Direct bolt-on design for a straightforward installation
• Designed to work alongside ICON suspension systems and components

Fits 2021-2025 Jeep Wrangler JL Rubicon JLU 4-Door models equipped with the 392 Hemi engine.

Protect your high-performance engine's oil pan with the Artec Industries Aluminum Oil Skid Plate. Engineered specifically for the Jeep Wrangler JL 392 Hemi, this skid plate provides essential underbody protection against rocks and trail obstacles without the excessive weight of traditional steel plating. The lightweight aluminum construction offers superior corrosion resistance, ensuring your undercarriage remains protected even in harsh off-road environments.

Functionality meets protection with a built-in oil door, allowing you to perform routine maintenance and oil changes without the hassle of removing the entire skid system. This plate is precision-cut to follow the contours of the JLU 392 chassis, ensuring maximum clearance and a secure fit to factory mounting points.

• Constructed from high-strength aluminum for lightweight durability
• Integrated oil door provides easy access for maintenance without removal
• Contoured specifically for the 392 Hemi engine oil pan and exhaust routing
• Direct-fit design for 4-door JLU Rubicon models
• Manufacturer Part Number: JL4122

Fits 2010-2024 Toyota 4Runner models.

The Rival aluminum skid plate provides heavy-duty protection for the most vulnerable driveline components under your Toyota 4Runner. This armor system shields the transmission and transfer case from impact damage during off-road use, while also acting as a robust deterrent against catalytic converter theft. By utilizing high-strength aluminum, Rival delivers essential underside defense without the significant weight penalty of traditional steel plating.

Designed for a precise fit, this skid plate mounts directly to factory points to ensure a straightforward installation that preserves maximum ground clearance. Whether you are navigating technical trails or looking for added security against theft in urban environments, this comprehensive skid plate is a vital upgrade for your 5th Gen 4Runner build.

• Complete coverage for transmission, transfer case, and catalytic converters
• Constructed from high-strength, lightweight aluminum for durability
• Corrosion-resistant finish designed for harsh off-road environments
• Bolt-on installation using existing factory mounting locations
• Manufacturer Part Number: 2333.9543.2.6

Fits 2024-2026 Ineos Grenadier and 2025-2026 Ineos Grenadier Quartermaster (Base, Fieldmaster, and Trialmaster).

Protect the vulnerable exhaust components of your Grenadier with Rival premium aluminum armor. This exhaust skid plate is engineered from 1/4-inch (6mm) deep-stamped aluminum alloy, providing heavy-duty impact protection for technical off-roading and overlanding without the weight penalty of traditional steel plates. The deep-stamping process increases the structural rigidity of the plate, ensuring it maintains its shape even when subjected to direct contact with rocks or stumps.

Installation is straightforward and requires no drilling or cutting to your vehicle's chassis, as the plate utilizes existing factory mounting points. Because aluminum is naturally corrosion-resistant, this skid plate will not rust or degrade even if the surface coating is scratched or gouged during trail use.

• Material: 1/4-inch (6mm) deep-stamped aluminum alloy
• Construction: High-strength, lightweight stamped design for maximum rigidity
• Installation: Direct bolt-on; no drilling or cutting required
• Finish: Natural corrosion resistance for long-term durability
• Manufacturer Part Number: 2333.4507.1.6

Fits 2025-2026 Toyota 4Runner.

Protect your fuel system from trail damage with the Rival Aluminum Gas Tank Skid Plate. The factory fuel tank on the 4Runner is a vulnerable target for rocks, stumps, and debris during off-road traversal. This skid plate provides a durable barrier, preventing punctures and costly repairs while maintaining a lightweight profile to minimize impact on your vehicle's payload and suspension performance.

• Precision-engineered from high-strength aluminum for optimal underbody protection without the weight of steel
• Designed to bolt directly to factory mounting points for a secure, straightforward installation
• Corrosion-resistant finish stands up to mud, salt, and harsh trail environments
• Low-profile geometry preserves maximum ground clearance for technical terrain

Fits 2025-2026 Subaru Forester AWD models (excluding Hybrid).

The Rival Aluminum Engine Skid Plate provides essential underbody protection for your Forester, shielding the engine oil pan and sensitive lower components from road debris, rocks, and off-road obstacles. Constructed from high-strength aluminum, this plate offers a significant durability upgrade over factory plastic splash guards while remaining lightweight to maintain vehicle handling and fuel efficiency.

• Precision-engineered for the 2025-2026 Subaru Forester AWD chassis
• High-strength aluminum construction for superior impact resistance
• Corrosion-resistant material ensures long-term protection in harsh environments
• Designed to bolt directly to existing vehicle mounting points for a secure fit
• Shields the engine sump and lower mechanical components from mechanical damage

Fits 2020-2024 Jeep Gladiator JT.

Protect your rig's critical rear components with DV8 Offroad Rear Inner Fender Liners. These liners are engineered to shield vulnerable vacuum and fuel lines from trail debris and rock kick-up that can lead to costly repairs. Constructed from 1.5mm lightweight aluminum, they provide a durable, corrosion-resistant barrier without adding unnecessary weight to your suspension.

Each liner is finished in a resilient satin black powder coat and features a precision laser-cut logo that lets your factory body color show through for a custom look. Designed as a direct bolt-on upgrade, these liners install into factory mounting points with no cutting or drilling required.

• 1.5mm lightweight aluminum construction
• Shields vital vacuum and fuel lines from debris
• Durable satin black powder coat finish
• Complete bolt-on installation with no cutting required
• Laser-cut logo design
• Precision fit for the rear inner fender compartments

Protect your lighting investment from the rigors of the trail with the Baja Designs Squadron 2.0 Rock Guard. This durable cover is engineered to snap directly onto Squadron 2.0 series housings, providing an essential sacrificial layer against rock strikes, heavy roost, and environmental debris that can pit or crack your LED lenses.

Whether you are transit-driving to the trailhead or navigating high-speed desert sections, this rock guard ensures your optics remain in peak condition. The snap-on design allows for quick installation and removal, making it easy to swap covers or prepare for night driving in seconds.

• Compatible with Baja Designs Squadron 2.0 series LED lights
• Provides high-impact protection for the front lens
• Easy snap-on installation and secure fit
• Finish: Black
• Sold individually (Single)

Fits 2018-2025 Jeep Wrangler JL models including Sahara.

Shield your vehicle's vulnerable rear suspension mounting points with Artec Industries Rear Lower Control Arm (LCA) Bolt-On Skids. These skids are engineered to protect the factory LCA brackets from direct impacts and rock damage that can lead to costly repairs or trail failures.

• Specifically designed for the 2018-2025 Jeep Wrangler JL chassis for a precise fit.
• Bolt-on design allows for a straightforward installation without the need for welding.
• CNC laser cut and formed for maximum durability and strength on the trail.
• Provides a smooth surface to slide over obstacles rather than hanging up on the factory brackets.
• Includes all necessary hardware for a complete installation on both rear lower control arm mounts.

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT.

The Artec Industries Front Lower Control Arm (LCA) Skids are engineered to shield and reinforce one of the most vulnerable components on your Jeep’s front axle. Factory control arm mounts often act as anchor points for rocks and trail debris, leading to expensive damage or alignment issues. These heavy-duty skids provide a durable, sacrificial sliding surface that allows your vehicle to navigate obstacles without hanging up on the brackets.

• Precision fitment for 2018-2025 Jeep Wrangler JL and Gladiator JT models
• Protects vulnerable factory front lower control arm mounts from impact and abrasion
• Heavy-duty construction designed for rigorous off-road use
• Low-profile design preserves essential ground clearance while adding structural integrity
• Helps prevent bracket deformation during rock crawling

Fits 2007-2018 Jeep Wrangler JK.

Protect your Jeep's vulnerable front lower control arm mounts with Artec Industries Front LCA Skids. These heavy-duty skids are designed to shield the factory brackets from direct impact and trail damage, providing a smooth surface to slide over rocks rather than hanging up or bending the mounting points. This is a critical upgrade for off-road enthusiasts looking to reinforce their JK's suspension architecture against harsh terrain.

• Protects factory front lower control arm mounting brackets
• Designed to prevent hang-ups and bracket deformation on obstacles
• Rugged construction built for off-road durability
• Specific fitment for 2007-2018 Jeep Wrangler JK models
• Manufacturer Part Number: JK4404

Fits select 2007-2014 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD trucks. These wheel well guards provide a critical barrier between your truck’s frame and the road, shielding exposed components from rust-causing mud, road salt, and debris.

Constructed from heavy-duty, impact-resistant thermoplastic, Husky Liners Wheel Well Guards are designed to withstand the harshest environments. Beyond protection, they enhance your vehicle’s aesthetics by covering the gap between the bed and the frame for a finished, clean look. Installation is straightforward and can be completed in minutes with basic tools.

• Shields the frame and suspension from rocks, dirt, and corrosive road salt
• Manufactured from durable, all-weather impact-resistant thermoplastic
• Easy to clean—simply spray down with a hose
• Designed for a precise fit on factory mounting points
• Proudly made in the USA
• Manufacturer Part Number: 79001
• Includes a lifetime guarantee from Husky Liners

Fits 2024-2026 Subaru Crosstrek Wilderness models.

Shield your vehicle's finish from road debris with the Rally Armor UR (urethane) mud flap set. Engineered specifically for the Subaru Crosstrek Wilderness, these flaps provide comprehensive four-corner protection against salt, spray, gravel, and tar. Unlike traditional rubber or vinyl flaps that can curl or crack over time, Rally Armor uses premium UV-resistant polyurethane. This material remains flexible in extreme sub-zero temperatures and maintains its rigid form in high heat, ensuring long-term durability in any environment.

• Direct fit for 2024-2026 Subaru Crosstrek Wilderness
• No-drill installation: mounts to factory locations using included hardware
• High-grade UR polyurethane construction for superior abrasion resistance
• Flexible, UV-resistant material prevents curling and weathering
• Black finish with high-contrast Red Rally Armor logo
• Manufacturer Part Number: MF116-UR-BLK-RD
• Complete set of 4 mud flaps with all necessary mounting brackets and hardware included

Fits 2019-2023 Ford Ranger Lariat, XL, and XLT models.

Secure your drivetrain against trail hazards with the Ford Performance Silver Skid Plate Kit. Designed to provide heavy-duty undercarriage protection, this kit shields the transmission and transfer case from rock damage and debris. This setup utilizes the same engineering principles as the skid plates featured on the 2017 Ford Raptor Race truck, offering professional-grade durability for your Ranger.

Constructed from 3/16-inch thick aluminum, these plates deliver a high strength-to-weight ratio without the bulk of traditional steel armor. The design includes side and center reinforcements to better withstand direct impacts, while the silver powder-coated finish provides long-lasting corrosion resistance. This kit is engineered to bolt directly to the truck for a precise, factory-style fitment.

• Replaces or adds heavy-duty protection for the transmission and transfer case
• Constructed from 3/16" thick aluminum for lightweight durability
• Side and center reinforcements for increased structural integrity
• Durable silver powder-coated finish for corrosion protection
• Direct bolt-on installation with no drilling required
• Includes all necessary mounting brackets and hardware
• Manufacturer Part Number: M-5018-RA

Fits 2018-2026 Jeep Wrangler JL models (3.6L / 2.0L).

Protect your vehicle's most vulnerable underbody components with the RIVAL Aluminum Engine Skid Plate. Engineered to shield the engine oil pan and sensitive lower-engine components from rocks, stumps, and trail debris, this plate offers essential protection for off-road enthusiasts. Constructed from high-strength aluminum, it provides a superior strength-to-weight ratio compared to traditional steel plates, ensuring your Jeep remains protected without significant weight penalties.

• Precision-engineered for the Jeep Wrangler JL chassis (2018-2026)
• Constructed from lightweight, corrosion-resistant aluminum
• Designed to bolt directly to factory mounting points for straightforward installation
• Compatible with 3.6L (2018-2020) and 2.0L (2018-2026) engine configurations
• Manufacturer Part Number: 2333.2744.1.6

Fits 2021-2025 Ford F-150 King Ranch, Lariat, Limited, Platinum, XL, and XLT models.

Protect your drivetrain and chassis from costly off-road damage with the Rival Full Set of Aluminum Skid Plates. Specifically engineered for the Ford F-150 Powerboost, these plates provide comprehensive underbody coverage to shield vital components from rocks, stumps, and debris. By using high-strength aluminum, Rival delivers robust impact resistance without the excessive weight of traditional steel plating.

• Full set provides total underbody coverage for critical mechanical components
• Manufactured from high-quality aluminum for an optimal strength-to-weight ratio
• Corrosion-resistant finish ensures long-term durability in harsh environments
• Designed to mount to factory points for a precise fit
• Manufacturer Part Number: 2333.1855.2.6-KIT-PB

Fits Baja Designs Squadron-R 2.0 series LED lights.

Protect your lighting investment with the Baja Designs Squadron-R 2.0 Clear Rock Guard. This guard is engineered to shield your LED light lens and housing from rocks, trail debris, and roost that can cause pitting or impact damage during off-road use. Its durable polycarbonate construction provides a sacrificial layer that maintains the integrity of your primary optics in harsh environments.

The snap-on design allows for a secure fit and quick removal when maintenance or cleaning is required, requiring no tools for installation. This clear version is ideal for drivers who want 24/7 lens protection without altering the color temperature or beam pattern of their lighting system.

• Fits Squadron-R 2.0 series lights
• High-impact polycarbonate construction
• Quick snap-on installation
• Protects against rocks and debris
• Sold individually
• Manufacturer Part Number: 668019

Fits 2019-2026 Chevrolet Silverado 1500 and 1500 LTD models including Custom, Trail Boss, LTZ, RST, and ZR2 trims.

Husky Liners Rear Wheel Well Guards (Part Number 79061) provide a heavy-duty barrier between your truck's vulnerable components and the elements. These liners are engineered to protect your frame, suspension, and body from the corrosive effects of mud, salt, snow, and road debris. Beyond their protective function, they offer a clean, finished appearance by concealing the gap between the bed and the frame.

Constructed from durable, impact-resistant all-weather thermoplastic, these guards are built to withstand harsh road conditions without cracking or warping. Installation is straightforward and can be completed in minutes, providing an immediate upgrade to your vehicle's longevity and aesthetics. Maintenance is simple; just spray them down to remove grit and maintain a factory-fresh look.

• Protects against rust and wear caused by road debris, salt, and mud
• Manufactured from heavy-duty, impact-resistant all-weather thermoplastic
• Conceals the frame and suspension components for a cleaner, amped-up look
• Simple installation takes only minutes with basic tools
• Designed to shed debris and is easy to clean with a standard hose
• Proudly made in the USA
• Manufacturer Part Number: 79061

Fits 2011-2016 Ford F-250 and F-350 Super Duty models, including King Ranch, Lariat, Platinum, XL, and XLT trims.

Protect your truck's paint and body panels from the hazards of the road with Husky Liners FormFit Mud Guards. These custom-molded front guards are engineered to match the specific contours of your Ford Super Duty fenders, providing full-tread coverage against gravel, mud, snow, and road salt. Manufactured from durable, impact-resistant thermoplastic, these guards are built to withstand harsh weather conditions and off-road debris without cracking or breaking.

Installation is straightforward and designed for the DIYer. These mud guards utilize existing OEM mounting points for a secure, no-drill attachment on most models. To ensure your vehicle's finish remains pristine, Husky includes their exclusive Husky Shield protective film, which creates an invisible barrier between the guard and the paint to prevent scuffing and friction wear.

• Precision Fit: FormFit Design follows the exact lines of your factory fenders for a professional look.
• Durable Construction: Heavy-duty thermoplastic material provides maximum impact resistance.
• Paint Protection: Includes Husky Shield invisible film to protect the vehicle's finish.
• Easy Install: Uses factory mounting points for a no-drill installation.
• Manufacturing: Proudly made in the USA.
• Part Number: 56681