Fits 2025-2026 Toyota 4Runner models.

Maximize the utility of your 6th Gen 4Runner with the DV8 Offroad Exterior Window Molle Panel. Specifically designed to integrate with the DV8 Roof Rack system, this driver-side panel provides a rugged mounting surface for essential gear that would otherwise take up valuable interior space. By utilizing the exterior window area, you can keep recovery tools, fuel containers, or tactical pouches within reach during trail runs or overland expeditions.

• Specifically engineered for the driver-side rear window of the 2025-2026 Toyota 4Runner
• Requires a DV8 Roof Rack for proper installation and support
• Standard Molle pattern compatible with a wide variety of mounting straps, clamps, and accessories
• Low-profile design maintains vehicle clearance while providing high-density storage
• Manufacturer Part Number: RRTF3-02EMD

Fits 2024-2026 Toyota Tacoma (SR, SR5, TRD Sport, TRD Off-Road, TRD PreRunner, TRD Pro, Limited, and Trailhunter).

Expand the lighting capabilities of your DV8 Offroad Double Cab Roof Rack with this low-profile aluminum light mount. Specifically engineered for the 2024-2026 Tacoma, this mount provides ten integrated mounting slots to accommodate a variety of forward-facing lighting setups. The lightweight aluminum construction ensures durability without adding significant weight to your rack system, finished in a micro-texture black powder coat for maximum corrosion resistance.

Note: This mount is exclusively compatible with the DV8 Offroad Toyota Tacoma Double Cab Roof Rack.

• Multiple configurations: Supports (1) 40-inch light bar, (2) 20-inch light bars, or up to (10) 3-inch pod lights
• Durable and lightweight aluminum construction
• Micro-texture black powder coated finish for added protection
• Low-profile design maintains vehicle aerodynamics and aesthetics
• Easy, fully bolt-on installation to existing roof rack mounting points

Fits 2021-2026 Ford Bronco.

The DV8 Offroad Foot Peg Pair provides a secure, comfortable resting point for your foot when operating your vehicle with the doors removed. These pegs are engineered to bolt directly into the factory front or rear door hinges, offering a seamless fit that is as easy to install as it is to remove for door re-installation. To ensure long-lasting durability in outdoor environments, each peg is finished in a micro-texture black powder coat that provides superior protection against corrosion and trail debris.

• Sold as a pair for driver and passenger side use
• Direct bolt-on installation to OEM front or rear door hinges
• Micro-texture black powder coat finish for corrosion resistance
• Integrated anti-slip grip design for secure footing
• Compatible with all 2-door and 4-door models

Fits 2020-2024 Jeep Gladiator JT.

Protect your rig's critical rear components with DV8 Offroad Rear Inner Fender Liners. These liners are engineered to shield vulnerable vacuum and fuel lines from trail debris and rock kick-up that can lead to costly repairs. Constructed from 1.5mm lightweight aluminum, they provide a durable, corrosion-resistant barrier without adding unnecessary weight to your suspension.

Each liner is finished in a resilient satin black powder coat and features a precision laser-cut logo that lets your factory body color show through for a custom look. Designed as a direct bolt-on upgrade, these liners install into factory mounting points with no cutting or drilling required.

• 1.5mm lightweight aluminum construction
• Shields vital vacuum and fuel lines from debris
• Durable satin black powder coat finish
• Complete bolt-on installation with no cutting required
• Laser-cut logo design
• Precision fit for the rear inner fender compartments

Fits 2025-2026 Toyota 4Runner models including SR5, TRD Sport, TRD Off-Road, Limited, Platinum, Trailhunter, and TRD Pro.

The DV8 Offroad Spec Series Roof Rack provides a robust, low-profile hauling solution for the sixth-generation 4Runner. Engineered for overlanding and utility, this rack features a lightweight aluminum body supported by heavy-duty steel mounting feet to ensure structural integrity for roof-top tents, awnings, and heavy gear loads. The modular design includes ten 80/20 T-slot crossbars compatible with M6 T-nuts, allowing for precise gear configurations and secure tie-down points.

Designed for aerodynamic efficiency, the angular wind deflector minimizes drag and wind noise while complementing the 4Runner's body lines. The rack features dedicated mounting slots along the entire length for scene lighting and rear slots for backup lights. Removable rear styling fins allow for flush mounting of accessories without interference, and the system is fully compatible with sunroof-equipped models.

• Construction: Lightweight aluminum body with steel mounting feet
• Finish: Micro-texture black powder coat with gloss black steel accent plate
• Crossbars: (10) 80/20 T-slot bars using M6 T-nuts
• Lighting Compatibility: Side and rear slots for scene/backup lights; rear crossbar fits a 40-inch light bar
• Modular Design: Removable rear fins for flush accessory installation
• Design: Ultra-low profile with angular wind deflector to reduce noise
• Compatibility: Designed for use with sunroof-equipped models

Fits 2024-2026 Toyota Tacoma Double Cab models including Limited, SR, SR5, Trailhunter, TRD Off-Road, TRD PreRunner, TRD Pro, and TRD Sport.

Equip your fourth-generation Tacoma for serious overland adventure with the DV8 Offroad Roof Rack. This ultra low-profile system is constructed from lightweight aluminum and utilizes heavy-duty steel mounting feet for a secure, bolt-on installation. The rack features six 80/20 T-slot cross bars designed for use with M6 T-nuts, providing a modular platform for mounting storage boxes, recovery tools, and roof-top tents. The integrated angular wind deflector reduces drag and noise, while the removable rear styling fins allow for the flush mounting of larger gear.

Lighting integration is built into every side of the rack. Side slot mounts facilitate the installation of rock lights along the entire length, and rear slot mounts allow for auxiliary backup lights. The rear cross bar is specifically engineered to accept a 40-inch light bar. For front-facing illumination, an optional front light mount (sold separately) supports multiple configurations including a single 40-inch bar, dual 20-inch bars, or up to ten 3-inch pod lights.

• Fits 2024-2026 Toyota Tacoma Double Cab
• Material: Lightweight aluminum rack with steel mounting feet and accent panels
• Finish: Micro-texture black powder coat with gloss black steel accents
• (6) 80/20 T-slot cross bars compatible with M6 T-nuts
• Integrated side and rear slot mounts for rock lights and backup lights
• Rear cross bar compatible with 40-inch light bar
• Removable rear fins for flush accessory mounting
• Ultra low-profile design with integrated wind deflector
• Full bolt-on installation; no drilling required

Fits select 2015-2026 Ford F-150, F-250 Super Duty, and F-350 Super Duty trucks. This DV8 Offroad ACC Relocation Bracket is designed for owners upgrading to an aftermarket front bumper who need to maintain their vehicle's Adaptive Cruise Control functionality. Because many heavy-duty bumpers obstruct the factory radar sensor location, this bracket moves the module to a clear vantage point behind the grille.

Built to withstand the elements, the bracket features a durable Micro-Texture Black powder coat finish that resists corrosion and blends into the vehicle's front end. It is engineered to be compatible with both types of Ford ACC modules and works alongside most aftermarket bumper brands. Please note: this bracket is not compatible with Platinum series grilles or any grille featuring chrome or metal construction, as these materials can interfere with radar signals.

• Retains Adaptive Cruise Control functionality with aftermarket bumpers
• Compatible with both factory ACC module types
• Durable Micro-Texture Black powder coat finish
• Simple bolt-on installation
• Fits most aftermarket bumper brands
• Note: Not compatible with Platinum or chrome/metal grilles

Fits 2025-2026 Toyota 4Runner models including SR5, TRD Sport, TRD Off-Road, Limited, Platinum, TRD Pro, and Trailhunter.

Specifically engineered for use with the DV8 Offroad RRTF3-02 roof rack, this Light Cutout Fairing provides a versatile mounting solution for forward-facing illumination while streamlining aerodynamics. The low-profile cutout design keeps light bars and pods tucked close to the roofline, significantly reducing wind noise and drag. Constructed with a durable micro-texture black powder coat finish, this fairing is built to withstand trail debris and harsh weather conditions.

This fairing offers modular lighting configurations to suit any night-driving requirement. It features 10 mounting slots and includes specialized brackets to accommodate various setups. Installation is a straightforward bolt-on process that integrates directly with the DV8 rack system.

• Compatible ONLY with DV8 Roof Rack PN: RRTF3-02
• Mounting options: (1) 40-inch straight light bar (42-inch mount-to-mount), (2) 20-inch single-row bars, or up to (10) 3-inch pod lights
• Includes brackets specifically for dual 20-inch single-row light bars
• Precision-cut 10-slot design for maximum lighting flexibility
• Low-profile geometry minimizes wind whistling and cabin noise
• Durable micro-texture black powder coat finish
• Simple bolt-on installation

The DV8 Offroad 7-inch Halo Elite Round Light provides powerful illumination with integrated styling via its switchable White and Amber accent halos. Designed for versatility, this light features a dual-mode system allowing users to toggle between standard driving and high-intensity off-road patterns to suit the environment.

This light includes a memory function that retains your last selected mode. To switch between driving and off-road modes, turn the light on for 2 seconds, then cycle the power off and on three times within a 5-second window. Professional wiring is required for safe operation and full functionality of the halo and main beam features.

• Light Output: 3,600 Raw Lumens
• Accent Halo: Dual-color White and Amber functionality
• Dual-Mode Operation: Selectable Driving and Off-road modes
• Memory Function: Automatically remains in the last selected mode when powered on
• Diameter: 7-inch round housing

Fits all 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models, including 4xe and Rubicon 392.

Maximize your cargo utility and keep essential gear organized with the DV8 Offroad Rear Window Molle Panels. These panels utilize the unused space over the rear wheel wells, providing a secure mounting surface for molle bags, first aid kits, recovery gear, and tools. Designed to conform to the interior lines of the Wrangler, they offer a clean, integrated look while standing up to the vibrations and impacts of off-road use.

• Fits both 2-door and 4-door models
• Universal molle pattern compatible with straps, bolts, and zip ties
• Works with or without factory hardtops installed
• Constructed from durable steel for long-term reliability
• Finished in a micro-texture black powder coat for corrosion resistance
• Direct-fit, bolt-on installation using factory mounting points
• Includes both driver and passenger side panels

Fits 2021-2026 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Raptor, Stroppe Edition, and Wildtrak.

The DV8 Offroad OE Plus Series V2 Front Bumper is a low-profile, high-clearance upgrade designed to protect your rig without sacrificing modern technology. Engineered from a combination of 3.5mm and 5mm plate steel, this bumper is finished in a resilient micro-texture black powder coat. It is specifically designed to retain factory Adaptive Cruise Control (ACC) functionality without a relocation bracket, and it remains fully compatible with the factory front camera, parking sensors, and OEM skid plate.

For those looking to brighten the trail, the V2 bumper features integrated mounting points for a 20-inch light bar and four 3-inch pod lights. The inclusion of paintable mesh accent panels allows for color-matching to your vehicle, while welded-in zip-tie tabs ensure clean wire management for your auxiliary lighting. This bumper is a direct bolt-on replacement that requires no cutting or drilling for installation.

• Materials: 3.5mm & 5mm plate steel construction
• Finish: Micro-texture black powder coat
• Lighting Mounts: Fits (1) 20-inch single or dual-row light bar and (4) 3-inch pod lights
• Recovery: (2) Integrated heavy-duty D-ring mounts
• Compatibility: Retains ACC, factory front camera, and parking sensors (plugs included for non-sensor models)
• Installation: Full bolt-on design; no drilling or cutting required

Fits select 2020-2026 Jeep Gladiator JT models (including Sport, Mojave, and Rubicon).

DV8 Offroad Fender Deletes are engineered to provide maximum suspension articulation and tire clearance for serious rock crawling. By replacing the bulky factory fenders with a slim, high-clearance profile, these deletes minimize the risk of body damage in tight terrain. The hardware is designed to sit flush within the deletes to maintain a clean, snag-free surface.

Constructed from heavy-duty 3.5mm plate steel, these deletes offer superior protection against trail debris. Each component is finished in a durable micro-texture black powder coat for long-lasting corrosion resistance. To ensure full utility, this kit includes plug-and-play amber LED turn signals that integrate directly into the factory wiring harness without complex modifications.

• Designed to optimize articulation and tire clearance for rock crawling
• Heavy-duty 3.5mm plate steel construction
• Micro-texture black powder coat finish for maximum durability
• Flush-mount mounting hardware included for a clean profile
• Includes plug-and-play amber LED turn signals
• Straightforward bolt-on installation (minimal trimming required)

Fits 2018-2026 Jeep Wrangler and 2020-2025 Jeep Gladiator models.

The DV8 Offroad Heat Dispersion Hood (HDMBJL-01) is engineered to manage under-hood temperatures by actively expelling trapped heat from the engine compartment. This functional upgrade is particularly effective when used in conjunction with DV8 inner fenders (INFEND-03FB) to maximize airflow and cooling efficiency during slow-speed crawling or high-load conditions.

Constructed from stamped steel for a precise fit and superior finish, this hood replaces the factory unit using a completely bolt-on installation process. It arrives in a matte black protective primer; please note that seam sealer and professional prep work are required prior to painting. The package includes the necessary side vents to complete the aggressive look and functional cooling profile.

• Manufactured from durable stamped steel for OE-style fitment
• Designed to improve engine cooling through heat dispersion
• Functional side vents included
• Direct bolt-on installation with no cutting required
• Matte black protective primer finish (requires prep and paint)
• Manufacturer Part Number: HDMBJL-01
• Note: This item ships via LTL freight only

Designed to maintain factory parking sensor functionality when upgrading to aftermarket armor, these DV8 Offroad Motorcraft (Ford) Parking Sensor Bezels provide a clean, secure mount for your OE sensors. These bezels are an essential solution for replacing damaged factory units or completing a bumper installation on Ford applications.

• Direct Replacement: Replaces OEM parking sensor bezels for Ford vehicles.
• Universal Bumper Fitment: Engineered to fit 1.1-inch sensor holes found on DV8 Offroad and various other aftermarket off-road bumpers.
• Durable Construction: Manufactured from high-quality ABS plastic for long-term weather resistance.
• Complete Set: Includes four (4) bezels to cover front or rear bumper sensor arrays.
• Manufacturer Part Number: MCFSNSR-01

The DV8 Offroad Elite Series 3-inch Cube LED Light (BE3FMW40W) provides high-output auxiliary lighting for demanding off-road conditions. Designed with a bezel-less housing for a clean, streamlined appearance, these pods feature integrated heat fins to manage thermal loads and extend component life. The internal OSRAM LEDs deliver 4,800 lumens of focused spot illumination using an indirect reflector system that minimizes glare and eliminates hotspots for a more usable beam pattern.

Built to withstand harsh environments, the light is equipped with a shatterproof, UV-resistant lens specifically designed to whisk away ice and water. The IP68-rated housing ensures complete protection against dust, sand, and water submersion. This flush-mount pod is ideal for integration into aftermarket bumpers, cargo beds, or custom body panels where a low-profile aesthetic is required.

• Power: 40 Watts total (utilizing 3W OSRAM LEDs)
• Light Output: 4,800 Lumens
• Beam Pattern: Spot
• Lifespan: Rated for up to 50,000 hours
• Housing: Bezel-less design with integrated heat dissipation fins
• Weather Protection: IP68 waterproof and dustproof rating
• Lens Material: Shatterproof and UV-resistant
• Manufacturer Part Number: BE3FMW40W

Fits all 2011-2018 Jeep Wrangler JK and Wrangler Unlimited models including Rubicon, Sahara, Sport, and special editions.

Upgrade your interior organization with the DV8 Offroad MPJK-07 Slim Front Door Molle Pockets. These rigid steel panels solve the common issue of sagging factory door netting by providing a durable, permanent storage solution that won't lose its shape or get caught in the door frame. The slim-profile design is engineered specifically to provide more legroom for the driver and passenger compared to standard storage pockets.

Each pocket is manufactured from 2mm steel and finished in a micro-texture black powder coat to match your Jeep's interior. The laser-cut molle pattern allows for the secure mounting of knife sheaths, holsters, multi-tools, and gear pouches, while the interior pocket offers additional space for small items. Installation is straightforward with a snap-in design that uses locking tabs to secure the panels into the factory mounting locations.

• Manufacturer Part Number: MPJK-07
• Replaces sagging OEM door netting with rigid storage
• Slim design maximizes interior legroom
• 2mm steel construction for long-term durability
• Micro-texture black powder coat finish
• Easy snap-in installation with locking tabs
• Sold as a pair (driver and passenger sides)

Fits 2018-2026 Jeep Wrangler JL and 2020-2026 Jeep Gladiator JT models.

The DV8 Offroad STJL-03 Adjustable Driver Side Dead Pedal provides a stable, comfortable resting point for your left foot, filling a notable gap in the factory interior of the JL and JT platforms. This component is essential for reducing driver fatigue during long highway commutes and providing better leverage when navigating technical off-road trails.

Engineered for durability and precision, this dead pedal is manufactured from high-strength steel and finished in a micro-texture black powder coat for superior grip and corrosion resistance. The design features integrated slotted bolt holes, allowing you to customize the pedal angle to suit your seating position and leg length. Installation is a straightforward bolt-on process using basic hand tools, requiring no drilling or permanent modifications to your vehicle.

• Manufactured from heavy-duty durable steel
• Micro-texture black powder coat finish for a clean OE-style look
• Adjustable footrest angle via slotted mounting points
• Direct bolt-on installation with no drilling required
• Designed specifically for the driver-side footwell
• Manufacturer Part Number: STJL-03

Fits 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT.

The DV8 Offroad Spec Series Front Half Doors deliver a true open-air experience without sacrificing passenger security or utility. Designed for the Jeep Wrangler JL and Gladiator JT, these doors significantly improve trail visibility, allowing you to better navigate rocks and obstacles. Each door features a removable, black mesh Molle-compatible center panel, perfect for mounting gear pouches and tools. These panels can be sanded and painted to color-match your vehicle's body or accents.

Built for durability and refinement, the HDJL-02F set includes secure locking handles and adjustable anti-rattle rubber isolators to ensure a quiet ride. The doors are finished in a rugged micro-texture black powder coat and come complete with door-mounted side mirrors and all necessary installation hardware.

• MPN: HDJL-02F
• Construction: Spec Series steel construction with micro-texture black powder coat
• Utility: Removable and paintable Molle-compatible mesh panels for gear storage
• Hardware included: Door-mounted side mirrors and secure locking handles
• Anti-Rattle: Adjustable rubber isolators to eliminate vibration and noise
• Installation: Direct-fit installation to factory mounting points

Fits 2014-2021 Toyota Tundra models (1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, and TRD Pro).

The DV8 Offroad Spec Series Rear Bumper provides high-clearance protection and utility for the second-generation Tundra. Engineered for a seamless fit, this bumper maintains critical factory functions by retaining full compatibility with your OEM parking sensors, license plate lights, and the factory tow hitch. The main body is finished in a durable micro-texture black powder coat for maximum corrosion resistance, accented by satin black powder-coated panels for a refined, multi-dimensional look.

This bumper is recovery-ready with two 1-inch thick D-ring mounts that accept a 7/8-inch pin (3/4-inch shackle). For nighttime visibility, the Spec Series includes mounting provisions for up to four 3-inch pod lights. The bolt-on design utilizes factory mounting locations for a straightforward installation, while integrated zip tie tabs ensure clean, protected wire management for your lighting and sensors.

• Direct bolt-on installation; no drilling required
• Maintains factory parking sensors and license plate lighting
• Full compatibility with factory tow hitch
• Two 1" thick D-ring mounts (7/8" pin / 3/4" shackle)
• Accommodates up to (4) 3" pod lights for enhanced rear lighting
• Welded-in zip tie tabs for organized wire management
• Micro-texture black powder coat finish with satin black accent panels
• Manufacturer Part Number: RBTT2-06

Fits select 2021-2025 Ford Bronco models (all trims). These DV8 Offroad rear inner fender liners replace the flimsy factory plastic with durable, lightweight aluminum to protect your vehicle's engine bay and wheel wells from trail debris. The high-clearance design is engineered to accommodate oversized tires and upgraded suspension components without interference.

Each liner is finished in a durable satin black powder coat and features raw, paintable mesh accents, allowing for a custom color-matched appearance. The geometry is specifically designed to clear remote reservoir shocks and larger tire setups, providing the necessary articulation space for off-road use. Installation is a straightforward bolt-on process using the provided hardware, though minor drilling is required for a secure fit.

• Lightweight aluminum construction for durability and weight savings
• Satin black powder-coat finish with raw paintable mesh inserts
• Clears up to 37-inch tires with a 2.5-3 inch lift kit
• Accommodates 35-inch tires on Sasquatch models or non-Sasquatch with 2-3 inch lift
• Designed to work with factory or aftermarket suspension and remote reservoir shocks
• Part Number: INFEND-08RB

Fits 2023-2026 Ford F-250 and F-350 Super Duty models.

The DV8 Offroad Spec Series Front Bumper (FBFF2-06) offers a low-profile, high-clearance design for the 2023+ Super Duty. Engineered to follow factory body lines, this bumper improves approach angles and provides necessary clearance for oversized tires. The heavy-duty winch mount is integrated into the design, supporting winches up to 12,000 lbs., while the D-ring mounts bolt directly to the frame for maximum structural integrity during recovery.

This bumper is finished in a micro-texture black powder coat with satin black accent panels and an aluminum-backed logo. It retains factory front parking sensor functionality and includes welded-in zip-tie tabs to keep light and winch wiring organized. For lighting, the bumper features mounting points for a single 20-inch center light bar and up to four individual pod lights.

• Supports up to 12,000 lb. winch (Max Dims: 24.25”L x 10.52”H x 7.15”W)
• Frame-mounted D-ring mounts for secure recovery points
• Retains factory front parking sensors (if equipped)
• Mounting points for (1) 20" center light bar and (4) pod lights
• Durable micro-texture black powder coat with satin black accents
• Bolt-on installation; inner fender liner trimming is required
• Manufacturer Part Number: FBFF2-06

Fits 2025-2026 Toyota Land Cruiser and Lexus GX550 (All Trims).

The DV8 Offroad RRTL4-01 Roof Rack provides a rugged, low-profile storage solution for the Land Cruiser 250 Series and Lexus GX 550. Engineered from lightweight aluminum with high-strength steel mounting feet, this rack is designed for serious overland utility without excessive weight. The system features nine 80/20 T-slot cross bars, allowing for precise mounting of rooftop tents, storage boxes, and recovery gear using standard M6 T-nuts.

This rack is built with integrated lighting versatility, including a rear cross bar compatible with a 40-inch light bar, side slots for rock lights, and rear mounts for backup lights. The fully bolt-on design ensures a secure fit to factory mounting points while maintaining clearance for the OEM sunroof and antenna.

• Constructed from lightweight aluminum with high-strength steel mounting feet
• Micro-texture black powder coat finish with gloss black steel accent panels
• Includes (9) 80/20 T-slot cross bars for modular gear mounting
• Integrated mounts for front light bars, side rock lights, and rear backup lights
• Removable rear styling fins for flush accessory mounting
• Direct bolt-on installation using factory roof mounting points
• Retains factory sunroof and antenna functionality
• Manufacturer Part Number: RRTL4-01

Fits 2019-2025 Ram 1500 Crew Cab models, including TRX, Rebel, Laramie, and Big Horn.

Enhance vehicle accessibility and protect your truck's rocker panels with DV8 Offroad OE Plus Side Steps. These steps are engineered to retain your Ram's factory ground clearance while providing a secure, anti-slip stepping surface for driver and passengers. Constructed from a combination of 3mm and 4mm steel, these side steps offer essential protection against light trail debris and road spray without the bulk of traditional rock sliders.

Installation is a straightforward bolt-on process, mounting directly to the body and pinch weld points with no drilling required. The micro-texture black powder coat finish provides superior corrosion resistance and matches OE trim for a clean, integrated look.

Note: These steps are compatible with Crew Cab models only. They will not fit Quad Cab or Standard Cab configurations.

• Precision-formed 3mm and 4mm steel construction
• Durable micro-texture black powder coat finish
• Anti-slip stepping surface for all-weather traction
• Low-profile design maintains OEM side clearance
• Direct bolt-on installation to factory mounting points
• Manufacturer Part Number: SRDR1-01

Fits select 2018-2025 Jeep Wrangler JL and Unlimited models.

The DV8 Offroad SPJL-12 Front Differential Skid Plate provides critical protection for your vehicle's front differential and pinion during technical off-road maneuvers. Engineered to withstand the pressure of rock scrapes that can lead to housing distortion or oil leakage, this skid plate ensures your drivetrain remains intact on the toughest trails.

Fabricated from heavy-duty 5mm plate steel, the SPJL-12 is finished in a durable micro-texture black powder coat for long-term corrosion resistance. For maximum stability and rigidity, it utilizes a five-point mounting system that distributes impact loads across the axle housing. The skid also features a removable aluminum DV8 logo plate, which can be painted to match your rig's color scheme or left as a contrast accent.

• Protects front differential housing and pinion from trail damage
• Manufactured from robust 5mm plate steel
• Durable micro-texture black powder coat finish
• Five-point mounting system for superior trail stability
• Fully bolt-on installation with no drilling or cutting required
• Customizable, paintable aluminum accent logo plate
• Manufacturer Part Number: SPJL-12

The DV8 Offroad LBJL-10 is a low-profile windshield light bar mount designed for select 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT models. This mount allows for the secure installation of a standard 50-inch LED light bar directly above the windshield while maintaining a sleek, aerodynamic profile that minimizes wind noise and preserves your field of vision.

Engineered for off-road durability, the bracket utilizes a rigid 3-bolt setup that attaches directly to factory mounting points for a quick, no-drill installation. The mount features an integrated hidden wiring channel to keep your harness protected and tucked away for a clean look. To protect your vehicle's finish, high-density foam backing is included to prevent metal-on-paint contact. This mount is also compatible with DV8 Offroad LBJL-11 A-pillar pod light mounts for expanded lighting configurations.

• Fits 50-inch LED light bars (52-inch mount-to-mount width)
• Micro-texture black powder coat finish for superior corrosion resistance
• Rigid 3-bolt mounting design for maximum stability on rough terrain
• Incorporated hidden wiring channel for a clean installation
• Includes high-density protective foam to safeguard factory paint
• Designed to work with optional LBJL-11 A-Pillar Pod Light Mounts
• Manufacturer Part Number: LBJL-10

Fits all 2007-2018 Jeep Wrangler JK and Wrangler Unlimited models, including Rubicon, Sahara, Sport, and X trims.

The DV8 Offroad TLJK-01 LED Tail Lights provide a modern aesthetic and improved visibility for your Jeep Wrangler JK. Designed as a direct-fit replacement for aged, faded, or trail-damaged factory units, these lights feature a distinctive horizontal LED layout that distinguishes your rig from the stock crowd. These units integrate high-intensity LEDs for both brake and turn signal functions, ensuring your intentions are clear on the road and trail.

Installation is straightforward and requires no complex modifications to your vehicle's electrical system. These lights utilize a true plug-and-play wiring harness that connects directly to the factory mounting points and electrical connectors. Whether you are performing a necessary repair or a lighting upgrade, the TLJK-01 offers a durable, high-performance solution for the JK platform.

• Manufacturer Part Number: TLJK-01
• Direct-fit replacement for factory housings
• Integrated LED brake and turn signal functionality
• Plug-and-play wiring harness for simple installation
• Compatible with both 2-door and 4-door JK models
• Sold as a pair

The DV8 Offroad WIRE HARNESS provides a professional-grade solution for installing auxiliary LED lighting. Engineered for reliability in off-road environments, this universal harness features heavily insulated, high-grade wiring to protect against abrasion and heat. It includes a built-in relay and fuse to isolate the lighting circuit and protect your vehicle’s factory electrical system from overloads.

While optimized for Jeep installations, the 11-foot lead and universal design make it suitable for a wide range of trucks and SUVs. The kit comes complete with an easy-to-mount switch for a clean, functional interior setup.

• Manufacturer Part Number: WIRE HARNESS
• Total Length: 11ft lead for flexible routing options
• Circuit Protection: Integrated relay and built-in fuse
• Construction: Heavily protected and insulated high-grade wiring
• Control: Includes a convenient, easy-to-mount toggle switch
• Compatibility: Designed for all DV8 LED lights and most universal LED pods or light bars

The DV8 Offroad WBPF-01 Pocket Fairlead provides a secure and low-profile solution for managing your synthetic winch rope while offering a dedicated storage point for your recovery hook. CNC-machined from high-quality aerospace-grade aluminum, this fairlead is engineered to withstand the friction and heat associated with synthetic lines, preventing the fraying or gouging common with steel-cable fairleads.

Designed for heavy-duty recovery, it features a 20,000 lb working load limit (WLL) to handle demanding off-road extractions. The recessed "pocket" design allows the included hook to sit flush against the fairlead when not in use, protecting your bumper from rattle and impact damage. Each unit is finished in a black military-grade hard-anodized coating for superior corrosion resistance and features a laser-engraved etched design.

• Construction: CNC-machined aerospace-grade aluminum
• Finish: Black military-grade hard-anodized coating
• Load Rating: 20,000 lb Working Load Limit (WLL)
• Compatibility: For use with synthetic ropes only (not for steel cable)
• Storage: Integrated pocket conveniently stores hook when not in use
• Included Hardware: Heavy-duty hook and stainless steel pin
• Manufacturer Part Number: WBPF-01

Note: For optimal performance and safety, it is recommended to use a soft shackle in conjunction with the included hook during recovery operations.

The DV8 Offroad Xtract WB12K-SR is a high-capacity 12,000 lb recovery winch engineered for reliability in demanding off-road environments. Built with a durable aluminum body and heavy-duty steel internal mechanical components, this winch balances weight savings with the structural integrity required for heavy pulls. It comes equipped with 80 feet of 3/8-inch synthetic rope, which offers a significant safety and weight advantage over traditional steel cables, protected by an included 5-foot chafe guard.

For vehicles with tight bumper clearances or recessed mounting plates, the Xtract features a relocatable solenoid box and an easy-to-use clutch design. Recovery operation is flexible with both a 12-foot wired remote and a built-in wireless remote system providing a 150-foot working range. The winch utilizes the industry-standard 10 x 4.5-inch mounting footprint and includes a precision-machined aluminum hawse fairlead.

• Part Number: WB12K-SR
• Rated Line Pull: 12,000 lbs
• Rope: 80' x 3/8" Synthetic Line
• Chafe Guard: 5' Protective Sleeve
• Fairlead: Aluminum Hawse Included
• Controls: 150' Wireless Remote and 12' Wired Remote
• Solenoid: Relocatable for custom fitments
• Mounting Pattern: 10" x 4.5"
• Body Material: Aluminum with Steel Mechanicals

The DV8 Offroad Elite Series D-Ring Shackles are engineered for heavy-duty vehicle recovery, offering an 8-ton working load limit (WLL) and a breaking strength exceeding 72,000 lbs. These shackles are forged from 1-1/16" thick steel to provide maximum durability during high-tension pulls. A key feature of the Elite Series is the 7/8" chromoly flush-mount pin, which sits level with the shackle body for a snag-free profile and a clean aesthetic. The pin is designed to be tightened or removed using a standard 3/8" ratchet or chuck.

To ensure a quiet ride on the trail or highway, each pair includes eight polyurethane isolators in two different thicknesses (1/8" and 3/16"). These allow you to fine-tune the fitment to your specific bumper mounts, effectively eliminating rattling and vibration. The shackles are finished in a heavy-duty red powder coat for superior corrosion resistance and visibility in off-road environments.

• 8-ton working load limit (WLL)
• 72,000lb+ breaking strength
• 1-1/16" thick forged steel construction
• 7/8" chromoly steel flush-design pin
• Fits industry-standard D-ring mounts
• Includes (4) 1/8" and (4) 3/16" anti-rattle isolators
• Requires 3/8" ratchet for pin installation and removal
• Sold as a pair
• Manufacturer Part Number: UNSK-01RD