Fits select 1986-2015 Mazda, Mitsubishi, Dodge, Eagle, and Plymouth models including RX-7, RX-8, Miata, Lancer Evolution, and Eclipse.

Achieve the perfect stance and improve vehicle stability with these ISC Suspension hub-centric wheel spacers. By pushing your wheels out 15mm, these spacers provide the necessary clearance for larger aftermarket brake kits or wider tire setups while narrowing the gap between the tire and the fender for a more aggressive look. The hub-centric design ensures the wheel load is properly centered on the hub rather than the studs alone, eliminating the vibrations often associated with low-quality, lug-centric alternatives.

• Thickness: 15mm
• Bolt Pattern: 5x114.3
• Hub Bore: 67mm
• Finish: Black
• Quantity: Pair (2 Spacers)
• Manufacturer Part Number: WSMM15B

Fits 1993-2001 Subaru Impreza models (Base, Brighton, L, LS, LX, Outback, and RS).

Fine-tune your GC8 chassis alignment with ISC Suspension Rear Camber Plates. These plates are engineered to replace the factory rear upper strut mounts, providing the essential adjustability needed to correct camber settings on lowered vehicles or to optimize geometry for performance driving and track use. By replacing soft rubber OE bushings with these rigid mounts, you gain more precise suspension feedback and maintain consistent alignment under heavy cornering loads.

• Provides precise rear camber adjustment for improved handling and tire wear
• CNC machined construction for high strength and durability
• Replaces restrictive factory upper strut mounts
• Designed specifically for the 1993-2001 Subaru Impreza (GC8) chassis
• Manufacturer Part Number: RCS001

Fits select 1991-2015 Lexus and Toyota models including GS350, GS430, GS450h, IS F, IS250, IS300, IS350, SC430, Supra, and MR2.

Improve your vehicle's stance and wheel fitment with these ISC Suspension hub-centric wheel spacers. By pushing the wheels out 15mm, these spacers help achieve a flush appearance with the fenders and can provide necessary clearance for aftermarket suspension components or larger brake calipers. The hub-centric design ensures the weight of the vehicle is supported by the hub rather than just the wheel studs, eliminating the vibrations often associated with generic, lug-centric spacers.

• Thickness: 15mm
• Bolt Pattern: 5x114.3
• Hub Bore: 60mm
• Color: Black
• Quantity: Pair (2 Spacers)
• Manufacturer Part Number: WSLX15B

Fits 2022-2024 Ford Maverick models.

Achieving proper alignment is critical for handling performance and tire longevity, especially on lowered vehicles. These ISC Suspension Rear Toe Arms (MPN: F031TA) replace the factory rear links to provide the necessary adjustability for precise toe settings. Whether you are correcting suspension geometry after installing lowering springs or coilovers, or setting up your truck for specific performance characteristics, these arms offer the range of motion required that factory hardware cannot provide.

• Provides essential rear toe adjustment for 2022+ Ford Maverick platforms
• Critical for maintaining correct tire wear and contact patches on lowered vehicles
• Robust construction designed to withstand increased suspension loads
• Direct replacement for factory rear toe links
• Manufacturer Part Number: F031TA

Fits select 1990-2015 Nissan 240SX, 300ZX, 350Z, 370Z, Altima, GT-R, Maxima, Quest, Rogue, and Sentra.

Achieve a flush fitment or gain necessary clearance for aftermarket suspension and braking components with this pair of ISC Suspension 15mm wheel spacers. These spacers are engineered with a hub-centric design specific to the 66mm Nissan hub bore, ensuring the wheel remains centered for vibration-free operation at high speeds. Each spacer is finished in black anodizing for corrosion resistance and a low-profile appearance behind the wheel face.

• Thickness: 15mm
• Bolt Pattern: 5x114.3
• Hub Bore: 66mm
• Finish: Black Anodized
• Quantity: Pair (2 Spacers)
• Hub-centric design for precise wheel centering
• Manufacturer Part Number: WSNS15B

Widen your vehicle's track and achieve the perfect fitment with ISC Suspension 15mm Hub Centric Wheel Spacers. Designed for vehicles with a 5x114 bolt pattern, these spacers move the wheel out from the hub to improve aesthetics, increase stability, and provide necessary clearance for larger brake calipers or suspension components.

These spacers feature a hub-centric design, ensuring the wheel is centered perfectly on the vehicle hub to eliminate vibration and maintain a smooth ride at highway speeds. Finished in a durable black coating for corrosion resistance, they are built to withstand the rigors of both daily driving and track use.

• Manufacturer Part Number: WS5X11415B
• Thickness: 15mm
• Bolt Pattern: 5x114
• Design: Hub Centric for precise fitment and vibration-free operation
• Color: Black Finish
• Quantity: Sold as a Pair (2 spacers)
• Hardware: Includes pre-pressed studs for secure installation

Achieve a wider stance and improved wheel fitment with this pair of ISC Suspension wheel spacers. These 15mm spacers are engineered to provide the necessary clearance for larger brake calipers or to push wheels out for a more aggressive, flush look. CNC-machined for precise tolerances, they ensure consistent performance and durability under load.

These spacers feature a hub-centric design, which centers the spacer directly onto the vehicle's hub. This technical configuration is essential for maintaining wheel balance and eliminating the steering wheel vibrations often caused by generic lug-centric alternatives. The black anodized finish offers superior corrosion resistance against road salt and moisture while maintaining a low-profile aesthetic behind the wheel spokes.

• Thickness: 15mm
• Bolt Pattern: 5x100
• Hub Centric design for vibration-free installation
• Material: CNC-machined construction
• Finish: Black Anodized
• Quantity: Pair (2 spacers)
• Manufacturer Part Number: WS5X10015B

Expand your wheel options with the ISC Suspension WA25B wheel adapter set. These precision-engineered adapters allow you to install wheels with a 5x114 bolt pattern on vehicles originally equipped with 5x100 hubs. At 25mm thick, they provide additional clearance for suspension and brake components while pushing the wheels outward for a more aggressive, flush fitment.

Finished in a durable black coating, these adapters are designed to withstand the elements and maintain a clean appearance behind your wheels. This complete set includes four adapters and the necessary hardware to secure the adapters to your factory studs, ensuring a straightforward installation process.

• Pattern Conversion: 5x100 (Hub) to 5x114 (Wheel)
• Thickness: 25mm
• Color: Black finish
• Quantity: Set of 4 adapters
• Hardware Included: Yes
• Manufacturer Part Number: WA25B

Fits 2022 Subaru WRX.

The ISC Suspension N1 V2 Street Sport Coilover Kit (MPN S024-S) is engineered to bridge the gap between daily street comfort and aggressive handling performance. Utilizing a high-pressure monotube design, these coilovers offer consistent damping performance and superior heat dissipation compared to standard twin-tube units. The Street Sport valving is specifically tuned for the 2022 Subaru WRX, providing a firm yet compliant ride suitable for spirited driving and commutes alike.

• 32-way adjustable damping to fine-tune rebound and compression settings
• Independent ride height and spring preload adjustment via threaded shock bodies
• Monotube damper construction for increased oil capacity and structural rigidity
• Street Sport valving profile optimized for daily-driven performance
• Anodized aluminum components and powder-coated springs for long-term durability
• Manufacturer Part Number: S024-S

Fits 2013-2017 Subaru BRZ, Scion FR-S, and Toyota 86 models.

The ISC Suspension N1 Series Coilovers (MPN S018-S) provide a comprehensive suspension upgrade for the ZN6/ZC6 chassis. Engineered to enhance handling response and provide a customizable stance, this kit allows for significant improvements in cornering performance compared to factory struts and springs. The N1 series focuses on a balance between street comfort and track-ready control, featuring full height adjustability without compromising spring travel.

• Manufacturer Part Number: S018-S
• Product Series: N1
• Type: Height-Adjustable Coilover Kit
• Installation: Direct bolt-on replacement for factory suspension components

Vehicle Fitment:

Fits select 2008-2020 Subaru WRX, STI, BRZ, Forester, and Legacy, Scion FR-S, and Toyota 86.

ISC Suspension adjustable rear toe arms are engineered to provide the necessary adjustment range to dial in rear alignment settings, which is essential for vehicles with lowered ride heights. When a vehicle is lowered, the factory eccentric bolts often lack the travel required to bring the toe back to within factory specifications or specialized performance settings. These arms replace the factory units to allow for precise suspension geometry correction, ensuring a proper contact patch, reduced tire wear, and enhanced stability during high-speed cornering.

• Provides a wider range of toe adjustment compared to factory hardware
• Helps prevent premature and uneven tire wear on lowered vehicles
• Enhances rear-end stability and predictable handling characteristics
• Designed as a direct replacement for the original equipment toe links
• Manufacturer Part Number: S012TA

Fits 2008-2014 Subaru Impreza WRX, WRX Limited, and WRX Premium models.

The ISC Suspension N1 coilover system provides a comprehensive suspension upgrade for the 2008-2014 Subaru WRX, replacing the factory strut and spring assembly with a fully adjustable damper and spring setup. Engineered to improve chassis response and handling characteristics, these coilovers offer independent ride height and spring preload adjustments. This design allows you to lower the center of gravity and achieve your desired stance without sacrificing essential piston stroke or suspension travel.

• Manufacturer Part Number: S008-S
• Full kit includes components for front and rear suspension
• Independent ride height and spring preload adjustment
• Designed for direct bolt-on fitment to factory mounting locations
• Optimized for performance street and track applications

Fits select 2000-2006 BMW 323i/Ci, 325i/Ci/xi, 328i/Ci, and 330i/Ci/xi models.

The ISC Suspension N1 Track/Race Coilover system is designed for high-performance driving and competition use. This B003-1-T kit provides the stiffness and damping control necessary for track environments, allowing drivers to dial in their suspension geometry for maximum cornering grip and stability. The N1 series features independent ride height and spring preload adjustments, ensuring you can lower your vehicle without sacrificing shock travel.

• Manufacturer Part Number: B003-1-T
• Valving Type: Track/Race (High-stiffness valving and spring rates)
• Adjustable damping to fine-tune rebound and compression
• Pillowball upper mounts for increased steering response
• High-grade aluminum construction for weight reduction and corrosion resistance
• Independent ride height and spring preload adjustment

Protect your adjustable suspension from the elements with ISC Suspension 370mm Length Coilover Covers. These covers are engineered to shield your shock shafts, seals, and threaded adjustment collars from road salt, grit, and moisture. By preventing debris buildup, these covers ensure your suspension remains fully adjustable and protected against premature seal failure, making them an essential upgrade for vehicles driven in harsh climates or winter conditions.

Designed for straightforward maintenance, these covers wrap around the coilover assembly without requiring you to remove the suspension from the vehicle. This design provides a secure barrier against corrosion while allowing for quick access when adjustments are needed.

• Prevents seized adjustment collars and protects shock seals
• Simple wrap-around installation without suspension disassembly
• Recommended for winter use and corrosive environments
• Length: 370mm
• Quantity: Pair (Set of 2)
• Manufacturer Part Number: 370MMCOILCOV

Maintain your suspension’s performance and longevity with the ISC Suspension 300mm Coilover Covers. These protective sleeves are designed to wrap around your coilover assemblies, providing a critical barrier against road salt, dirt, sand, and debris that can lead to corrosion or damage to threaded shock bodies and seals.

Ideal for vehicles operated in harsh winter climates or dusty environments, these covers help ensure your ride height remains easily adjustable by keeping the adjustment threads clean and free of grit. They are a practical solution for any enthusiast looking to protect their investment from the elements.

• Length: 300mm
• Sold as a pair (set of 2)
• Protects shock shafts, seals, and threads from contaminants
• Helps prevent corrosion and seizing of adjustment perches
• Durable construction for long-term use in various weather conditions
• Manufacturer Part Number: 300MMCOILCOV