Fits select 1998-2006 Volkswagen Beetle, Golf, GTI, Jetta, and Rabbit models (1.8T / 2.0T).

This Prothane lower motor mount insert is designed to stiffen the factory "dogbone" mount by filling the voids in the original rubber bushing. By limiting excessive engine and transmission movement, this insert helps deliver power to the ground more effectively and provides a more connected feel during gear changes and hard acceleration. It is an essential upgrade for high-mileage vehicles where the factory rubber has softened or for enthusiasts seeking improved drivetrain response.

• Constructed from high-performance red polyurethane for superior durability over OE rubber
• Reduces wheel hop and engine pitch without the harshness of a full solid mount
• Installs directly into the factory lower motor mount housing
• Maintains better engine alignment under load
• Resistant to automotive fluids and road grime

Fits 1957-1972 Ford F100 and F150 trucks.

Replace soft, deteriorated factory rubber bushings with this high-performance polyurethane kit from Prothane. These rear spring and shackle bushings eliminate the excessive deflection found in aged OE components, restoring proper suspension geometry and improving handling stability under load. Unlike traditional rubber, Prothane’s polyurethane formula is engineered to resist oil, grease, road salt, and environmental degradation, ensuring a significantly longer service life for your classic Ford truck.

• Precision-molded for an exact fit in factory mounting points
• Resistant to chemicals and environmental wear that destroys rubber
• Maintains spring alignment to reduce wheel hop and unpredictable handling
• Includes bushings for both rear leaf springs and rear shackles
• Durable black finish for a clean, period-correct look

Prothane Universal Super Grease is a high-performance synthetic lubricant specifically formulated for the installation and maintenance of polyurethane bushings. Standard petroleum-based greases can degrade polyurethane and wash away quickly; this specialized formula is designed to stay in place, significantly reducing friction and eliminating the squeaking often associated with performance suspension components.

This 14oz tube fits standard grease guns for easy application to greaseable bolts, control arm bushings, and sway bar mounts. Its waterproof and heat-resistant properties ensure long-lasting protection against road salt, moisture, and heavy loads, keeping your suspension quiet and moving freely.

• Formulated specifically for polyurethane-to-metal contact points
• Eliminates suspension squeaks and reduces component wear
• Waterproof and tacky consistency resists wash-out and environmental debris
• Compatible with standard 14oz grease guns for easy maintenance
• Size: 14oz (Tube)
• Color: Red

Prothane Universal Super Grease is a specialized synthetic lubricant engineered specifically for the installation and maintenance of polyurethane suspension components. This high-tack, waterproof formula is essential for preventing the friction-induced squeaking often associated with aftermarket bushings in control arms, sway bars, and leaf springs.

Unlike standard petroleum-based lubricants that can cause polyurethane to swell or degrade over time, this non-melting Super Grease is chemically compatible and designed to withstand high-pressure loads and harsh environmental exposure. It creates a long-lasting barrier that ensures smooth component articulation and protects the integrity of your suspension upgrades.

• Product Type: Universal Synthetic Bushing Lubricant
• Volume: 0.5oz (14.2g)
• Formulation: Waterproof and non-melting synthetic
• Compatibility: Safe for all polyurethane bushings and mounts
• Packaging: Clear 0.5oz tube (without manufacturer logo)

Fits 2000-2005 Toyota Celica GT and GTS models.

The Prothane Total Kit provides a comprehensive suspension overhaul by replacing soft factory rubber bushings with high-performance polyurethane components. These red polyurethane bushings are engineered to maintain precise suspension geometry under load, significantly reducing deflection for improved steering response and cornering stability. Unlike OEM rubber, these components are resistant to road salts, oil, and environmental degradation, ensuring long-term durability and consistent performance.

• Complete master bushing set for a full suspension refresh
• High-grade red polyurethane construction for maximum longevity
• Maintains better alignment and reduces chassis flex
• Resistant to automotive fluids and ozone rot
• Direct fitment for 2000-2005 Toyota Celica (T230) chassis

Fits 1999-2004 Ford Mustang SVT Cobra and 10th Anniversary models with Independent Rear Suspension (IRS).

Restore proper ride height and eliminate unwanted suspension noise with Prothane polyurethane coil spring isolators. Factory rubber isolators are prone to compression, cracking, and rot over time, leading to metal-on-metal contact and poor spring indexing. These red polyurethane replacements are engineered to withstand the heavy loads and environmental exposure that cause OEM rubber to fail.

Designed specifically for the IRS-equipped Cobra, these isolators provide a firm, durable seat for your rear coil springs, ensuring they remain correctly aligned during hard cornering and acceleration. The polyurethane material offers superior resistance to oils, road salt, and debris while maintaining its shape far longer than standard rubber components.

• High-performance red polyurethane construction
• Direct replacement for compressed or rotted factory rubber isolators
• Specific fitment for 1999-2004 Ford Mustang SVT Cobra IRS
• Maintains consistent spring alignment and prevents metal-to-metal contact
• Helps restore and maintain correct vehicle ride height

Prothane universal sway bar bushings are engineered to improve vehicle handling and stability by replacing soft, prone-to-failure factory rubber with high-performance polyurethane. These 3/4-inch bushings provide a firmer pivot point for the sway bar, effectively reducing body roll during cornering and maintaining better alignment under load.

The polyurethane construction is resistant to oil, road salt, and environmental contaminants that typically degrade rubber, ensuring a much longer service life and consistent performance. Designed for use with A-style brackets, these bushings are a reliable solution for custom suspension setups or restoring precision to a worn chassis.

• Bore Diameter: 3/4 inch
• Bracket Style: A Bracket
• Material: Precision-molded polyurethane
• Color: Black
• Part Number: 19-1106-BL
• Improves steering response and minimizes sway

Fits select 1980-1998 Ford F-100, F-150, F-250, and F-350 pickup trucks.

Replace soft, deteriorated OE rubber bushings with Prothane polyurethane axle pivot bushings to restore steering precision and maintain proper front-end alignment. On Ford Twin I-Beam and Twin Traction Beam (TTB) front suspension systems, the axle pivot points are critical for managing lateral forces and tire geometry. Worn bushings lead to wandering steering, uneven tire wear, and unpredictable handling under load.

These red polyurethane bushings are engineered to be firmer and more durable than rubber, resisting oil, road salt, and ozone. This increased rigidity ensures the axle beams remain properly indexed during suspension travel, providing a more stable and communicative driving experience for your Ford F-Series truck.

• Part Number: 6-603
• Material: High-grade polyurethane
• Color: Red
• Application: Axle Pivot (Front Suspension)
• Maintains alignment specs longer than factory rubber
• Resistant to automotive fluids and environmental contaminants

Fits 1985-1998 Volkswagen Golf and Jetta.

Restore steering precision and suspension geometry to your chassis with the Prothane 22-2009 Total Kit. Over time, factory rubber bushings become soft, crack, and deflect under load, leading to vague handling and poor alignment retention. This comprehensive polyurethane bushing set replaces those worn OE components with high-durometer polyurethane, providing the rigidity needed for predictable handling and sharper response during cornering or braking.

• High-performance polyurethane construction for superior durability
• Maintains consistent alignment and reduces wheel hop
• Resistant to road chemicals, oils, and environmental degradation
• Replaces critical suspension and chassis bushings
• Vibrant red finish
• Manufacturer Part Number: 22-2009

Fits 1995-2004 Chevrolet Cavalier and Pontiac Sunfire J-Body models.

Factory rubber control arm bushings are prone to excessive deflection and eventual rot, leading to vague steering response and inconsistent alignment geometry. Prothane front control arm bushings (MPN 7-234) are engineered from high-performance polyurethane to provide the rigidity needed for sharper handling while maintaining enough resilience for street use. By replacing the compliant factory units, these bushings keep your control arms properly located during hard cornering and braking, ensuring your tires maintain a better contact patch with the road.

• High-density polyurethane construction resists oil, grease, and road contaminants better than rubber
• Improves steering feel and response by reducing suspension arm play
• Maintains consistent wheel alignment during aggressive driving
• Designed to fit the 1995-2004 GM J-Body front control arm housing
• Finish: Red
• Manufacturer Part Number: 7-234

Fits 2000-2005 Mitsubishi Eclipse (GS, GT, GTS, RS, and Spyder models).

Prothane polyurethane sway bar bushings provide a performance upgrade over factory rubber, which often softens, cracks, and loses its shape over time. These 19mm bushings for "A" style brackets restore predictable handling and minimize body roll by keeping the sway bar securely located during cornering. Precision-molded from high-performance polyurethane, they are engineered to withstand road grime, oil, and heat significantly better than OEM components.

• Bore Diameter: 19mm
• Bracket Type: A Bracket
• Material: High-durometer red polyurethane
• Resistant to oil, grease, and road salt
• Direct replacement for worn or degraded factory bushings
• Manufacturer Part Number: 19-1118

Fits 1984-1989 Nissan 300ZX (Base, Turbo, and 2+2).

The Prothane 14-101 IRS Rear Subframe Bushing Kit is engineered to replace soft, degraded factory rubber bushings, restoring chassis rigidity and suspension geometry. Over time, original equipment (OE) subframe bushings break down, resulting in excessive subframe deflection, rear-end wandering, and unpredictable handling. These high-performance red polyurethane bushings provide a much firmer interface between the subframe and the chassis, ensuring your Z31 maintains consistent alignment under heavy cornering or acceleration.

• Replaces worn factory rubber to eliminate subframe slop and clunking
• Firm polyurethane construction improves power transfer and steering response
• Highly resistant to road oils, chemicals, and environmental degradation
• Precision-engineered for a direct fit into the factory IRS mounting points
• Complete kit for a comprehensive rear subframe refresh
• Color: Red
• Manufacturer Part Number: 14-101

Fits select 1964-2002 Buick, Chevrolet, Ford, Mercury, and Pontiac models.

This Prothane Universal Sway Bar End Link Set is designed to restore and improve suspension stability by replacing soft, compliant factory rubber bushings with high-performance polyurethane. These 4.5-inch mounting length links provide a more direct connection between the sway bar and the control arm, effectively reducing body roll and improving steering response during cornering. The durable polyurethane construction is resistant to oil, road grime, and atmospheric rot, ensuring the bushings maintain their shape and effectiveness far longer than OEM components.

• Manufacturer Part Number: 19-409-BL
• Mounting Length: 4.5 inches (4 1/2in)
• Bushing Material: High-grade black polyurethane
• Finish: Black
• Includes: Complete set for both sides including bolts, washers, and spacers
• Performance: Increases chassis rigidity and improves handling geometry

Fits 1984-1987 Pontiac Fiero (Base, GT, SE, Sport, and Value Leader).

Restore steering precision and suspension geometry with the Prothane Total Kit. This comprehensive polyurethane bushing set is designed to replace soft, worn-out factory rubber components that degrade over time, leading to alignment shift and vague handling. By upgrading to high-quality polyurethane, you significantly reduce deflection, ensuring your Fiero maintains a consistent contact patch during spirited driving and daily commuting.

Each component in the 7-2034 kit is precision-molded for an exact fit and finished in a vibrant red. Unlike traditional rubber, these polyurethane bushings are resistant to engine oils, road salt, and ozone, providing a much longer service life and more predictable chassis feedback. This "Total Kit" approach simplifies the restoration process by providing a complete set of bushings to refresh your vehicle's critical suspension points in one package.

• Replaces compliant factory rubber with durable polyurethane
• Improves steering response and cornering stability
• Resistant to oils, grease, and environmental contaminants
• Finish: Red
• Manufacturer Part Number: 7-2034

Fits 1997-2004 Chevrolet Corvette (Base, 50th Anniversary Edition, and Pace Car models).

The Prothane 7-2014 Total Kit is a comprehensive suspension overhaul designed to replace soft, perishing factory rubber bushings with high-performance polyurethane. Over time, OEM rubber components deflect under load, leading to alignment shifts and imprecise handling. This kit provides the necessary rigidity to maintain suspension geometry, resulting in sharper steering response and improved chassis control.

• Replaces worn OE bushings to restore and improve handling characteristics
• High-performance polyurethane construction resistant to oils, road salt, and ozone
• Maintains precise alignment for more predictable cornering and better tire wear
• Complete kit engineered specifically for the C5 Corvette chassis
• Vibrant red finish for a performance appearance
• Manufacturer Part Number: 7-2014

Fits all 1980-1996 Ford Bronco 2WD and 4WD models including Custom, Eddie Bauer, XL, and XLT trims.

Over time, factory rubber body mounts deteriorate due to UV exposure, road grime, and constant compression, leading to body sag and sloppy handling. Prothane polyurethane body mount bushings provide a necessary upgrade for your 1980-1996 Ford Bronco, offering the structural rigidity needed to maintain proper body-to-frame alignment. Unlike soft OE rubber, these precision-engineered mounts resist oil, chemicals, and ozone, ensuring they won't rot or crumble over years of use.

This kit is designed to replace the worn factory mounts at all mounting points, restoring the original ride height and improving the overall feel of the chassis. Whether you are performing a frame-off restoration or simply correcting door gaps and body lines, these red polyurethane mounts provide the durability required for both daily driving and off-road use.

• Manufacturer Part Number: 6-107
• Material: High-density Red Polyurethane
• Resistant to road oils and vehicle fluids
• Maintains proper body-to-frame alignment
• Includes bushings and necessary hardware for installation

Fits 1994-2001 Dodge Ram 2500 and 3500 4WD models.

Restore front-end precision to your heavy-duty truck with Prothane polyurethane front control arm bushings. These bushings are engineered to replace soft, factory rubber components that frequently perish under heavy loads and environmental stress. By upgrading to Prothane’s performance-grade polyurethane, you maintain consistent control arm geometry and alignment, resulting in sharper steering response and improved handling stability.

Unlike standard rubber, this polyurethane formulation is impervious to road salt, oil, and ozone, ensuring a significantly longer service life even in harsh driving conditions.

• Direct replacement for OE rubber bushings to improve suspension kinematics
• High-density polyurethane construction for superior durability
• Resistant to automotive fluids and environmental degradation
• Color: Black
• Manufacturer Part Number: 4-216-BL

Fits 2000-2005 Toyota Celica GT and GTS.

Replace soft factory rubber with Prothane high-performance polyurethane sway bar bushings to sharpen your vehicle's steering response and handling. These red bushings are engineered to fit 17mm diameter sway bars utilizing "A" style brackets. Unlike original equipment rubber that can perish and distort under load, Prothane's polyurethane formula resists compression and environmental contaminants to keep your sway bar properly indexed for reduced body roll during hard cornering.

• Manufacturer Part Number: 19-1116
• Bore Diameter: 17mm
• Bracket Type: Fits "A" Style Brackets
• Material: High-durometer polyurethane
• Finish: Red

Prothane Universal Sway Bar Bushings are a high-performance alternative to soft, factory-installed rubber bushings. These components are molded from specialized polyurethane to eliminate the excessive deflection and "slop" that develops in a vehicle's suspension over time, providing more consistent handling and improved roll stiffness.

• Precision Handling: Reduces sway bar play for better cornering stability and steering response.
• Polyurethane Durability: Highly resistant to road salt, oil, and grease that typically degrade rubber bushings.
• Application Specs: 1-inch (25.4mm) inner diameter designed specifically for Prothane "A" style mounting brackets.
• Distinctive Finish: Molded in Prothane’s signature red polyurethane for easy inspection and a custom look.
• Manufacturer Part Number: 19-1110

Fits 1989-1994 Toyota Pickup 2WD (Base, DLX, SR5).

Restore the handling and steering precision of your truck with the Prothane Total Kit (18-2004). Factory suspension bushings are typically made of soft rubber that degrades over time when exposed to road salt, oils, and ozone, leading to sloppy steering and inconsistent alignment. This comprehensive kit replaces those worn OE components with high-durometer polyurethane, which is far more resistant to environmental contaminants and mechanical stress.

By maintaining proper suspension geometry, these bushings improve chassis feedback and reduce wheel hop during acceleration. This is a direct-fit solution engineered to bolt into the factory mounting points, making it a critical upgrade for any 1989-1994 2WD Toyota Pickup restoration or performance build.

• Manufacturer Part Number: 18-2004
• Material: Precision-molded polyurethane
• Finish: Red
• Application: Full vehicle bushing set for 2WD models
• Resistant to oils, road chemicals, and atmospheric rot

Fits 1996-2001 Toyota 4Runner (Base, Limited, and SR5).

Restore the handling and cornering stability of your vehicle with Prothane rear sway bar bushings. Factory rubber bushings are prone to cracking and distortion over time, leading to excessive body roll and a disconnected feel in the chassis. These 19mm replacements are engineered from high-grade polyurethane, which is significantly more durable than OE rubber and resistant to road oils, salt, and weather.

By maintaining a firmer grip on the sway bar, these bushings minimize deflection and ensure the stabilizer bar performs as intended during weight transfer. This is a direct-fit upgrade that mounts into the factory locations for a precise fit.

• Manufacturer Part Number: 18-1116-BL
• Material: High-performance polyurethane
• Bushing Diameter: 19mm
• Color: Black
• Location: Rear Sway Bar

Fits all 1986-1989 Suzuki Samurai models including Base, JA, JX, and JX SE.

Standard rubber bushings are often the weak link in a leaf spring suspension, prone to dry rotting, cracking, and excessive deflection under load. This Prothane polyurethane bushing kit (17-1002) is specifically engineered to replace worn factory components, restoring precise suspension geometry and improving handling characteristics. These bushings provide a firmer pivot point, which helps maintain axle alignment during articulation and cornering.

This kit is specifically designed for use with aftermarket shackles, ensuring a proper fit for modified Suzuki Samurai rigs. The red polyurethane construction is resistant to automotive oils, road salt, and environmental degradation that typically destroys OEM rubber.

• Manufacturer Part Number: 17-1002
• Material: High-performance red polyurethane
• Components Included: Spring and shackle bushings
• Application: Compatible with aftermarket shackles
• Fits: 1986-1989 Suzuki Samurai

Fits 2003-2009 Nissan 350Z including Base, Enthusiast, Performance, Touring, Track, and Nismo trims.

Eliminate excessive drivetrain deflection and improve power delivery with the Prothane polyurethane rear differential bushing kit. Factory rubber bushings are designed for comfort but are prone to softening and tearing, which results in significant differential movement and wheel hop during hard acceleration. These high-performance red polyurethane replacements provide a much firmer mount for the differential housing, ensuring more consistent traction and a more connected feel.

• Reduces differential movement to minimize wheel hop and drivetrain slop
• Durable polyurethane construction outlasts factory rubber
• Resistant to automotive oils, road grime, and ozone
• Provides more precise power transfer to the rear wheels
• Manufacturer Part Number: 14-1603
• Color: Red

Fits 1990-1997 Mazda Miata (Base, LE, M Edition, SE, and STO).

The Prothane Total Kit is a comprehensive suspension solution designed to replace soft, aged factory rubber bushings with high-performance polyurethane. By significantly reducing component deflection under load, this kit helps maintain consistent suspension geometry and alignment during aggressive cornering, braking, and acceleration. This results in sharper steering response and a more connected feel to the road.

Constructed from Prothane’s specialized polyurethane formula, these bushings are engineered to withstand the rigors of both daily driving and track use. Unlike OEM rubber, this material is resistant to degradation from automotive fluids, road salts, and environmental debris, ensuring long-term durability and performance stability.

• Complete suspension bushing overhaul for improved chassis rigidity
• Precision-engineered for a direct fit into factory locations
• Black polyurethane finish for a clean, OE-style appearance
• Includes high-quality lubricant for installation
• Manufacturer Part Number: 12-2002-BL

Fits 1987-1995 Jeep Wrangler YJ models including Base, Sahara, Laredo, Renegade, Rio Grande, S, SE, and Sport.

Replace your soft, worn-out factory rubber with the Prothane 1-1017 Front and Rear Main Spring Eye Bushing Kit. These red polyurethane bushings provide a significant upgrade in suspension stability by maintaining proper leaf spring alignment under load. Unlike OE rubber, which can rot and crack over time due to environmental exposure, Prothane’s high-performance polyurethane is resistant to oil, road salt, and contaminants, ensuring a longer service life and more consistent handling.

• Location: Front and Rear Main Spring Eyes
• Material: High-Density Polyurethane
• Color: Red
• Resistant to rot, road chemicals, and grease
• Replaces flexible OEM rubber for improved suspension response
• Manufacturer Part Number: 1-1017

This kit includes all necessary bushings for the main eyes of both the front and rear leaf springs, restoring the pivot-point integrity of your YJ's suspension system.

Fits 2000-2005 Toyota Celica GT and GTS.

Restore suspension precision and sharpen handling with Prothane Rear Control Arm Bushings. Factory rubber bushings are prone to drying, cracking, and excessive deflection, which leads to unpredictable alignment changes and steering vagueness. These polyurethane replacements provide a more rigid interface between the control arm and the chassis, ensuring your Toyota Celica maintains its geometry under load.

Designed for long-term durability and resistance to automotive fluids and road salt, these bushings are a direct-fit upgrade for enthusiasts looking to improve road feel without the harshness of solid metal spherical bearings. The black finish provides an understated, OEM-plus look under the vehicle.

• Replaces soft factory rubber for improved suspension geometry
• Durable black polyurethane construction resists degradation
• Reduces unwanted control arm movement and deflection
• Precision-engineered for 2000-2005 Celica rear suspension
• Manufacturer Part Number: 18-302-BL

Fits select 1988-2001 Acura Integra, Honda Civic, Civic del Sol, and CRX models.

Restore precise handling and eliminate unwanted rear-end movement with the Prothane Rear Trailing Arm Bushing Kit. Over time, factory rubber bushings degrade, dry-rot, and tear, leading to excessive deflection and unpredictable "rear-end steer" during cornering. These high-performance polyurethane replacements provide the necessary rigidity to maintain suspension geometry under load, ensuring consistent alignment for street or track use.

• Replaces soft, worn, or torn factory rear trailing arm bushings
• Maintains rear suspension geometry and alignment stability
• High-durometer polyurethane construction for superior durability
• Resistant to road oils, chemicals, and environmental ozone
• Color: Red
• Manufacturer Part Number: 8-304

Fits 1988-2000 Honda Civic, 1988-1991 CRX, and 1993-1997 Civic del Sol.

The Prothane 8-1602 Shifter Stabilizer Kit is designed to replace the compliant factory rubber bushings in your Honda's shift linkage. By upgrading to Prothane high-performance polyurethane, you significantly reduce shifter play and slop, resulting in more precise, positive gear engagements during spirited driving and track use.

• Eliminates excessive shifter movement and "mushy" shift feel
• Constructed from high-durometer polyurethane for lasting durability
• Resistant to oil, grease, and environmental contaminants that degrade rubber
• Red finish for easy identification and a custom appearance
• Direct replacement for OE shift linkage bushings
• Manufacturer Part Number: 8-1602

Fits select 1958-1982 Chevrolet models, including Bel Air, Biscayne, C10-C30 Pickup, Camaro, Caprice, Chevelle, Chevy II, Corvette, El Camino, Impala, and Nova.

Replace worn or fluid-soaked rubber engine mounts with Prothane 7-504 polyurethane motor mounts to significantly reduce engine movement and torque loss. These "Type A Short" mounts are engineered to provide the stability required for performance driving while maintaining enough vibration damping for street use. Unlike factory rubber that degrades over time, these high-durometer polyurethane mounts are resistant to oil, grease, and road contaminants.

• Manufacturer Part Number: 7-504
• Configuration: Type A Short
• Material: Premium Red Polyurethane
• Provides superior engine stabilization compared to factory rubber
• Interlocking design for added safety and durability
• Precision fit for classic GM mounting points

Fits 2006-2009 Chevrolet Trailblazer and GMC Envoy models including SS, Denali, EXT, and XL trims.

Restore steering precision and suspension stability with Prothane polyurethane front control arm bushings. Over time, factory rubber bushings degrade, crack, and soften, leading to excessive suspension deflection, uneven tire wear, and a vague steering feel. These high-performance polyurethane replacements are engineered to maintain correct alignment geometry under load, providing a firmer, more responsive driving experience without the maintenance requirements of OEM rubber.

• Replaces soft factory rubber bushings to improve handling and steering response
• Polyurethane construction is resistant to oil, grease, road salt, and environmental debris
• Maintains consistent alignment settings for improved tire longevity
• Durable black finish for a discreet, professional appearance
• Specifically designed for the GMT360 platform control arms
• Manufacturer Part Number: 7-242-BL