Utilizing factory cut points and mounting mechanics the Dinan exhaust system is a straightforward install with precision fitment just like you would expect straight from the manufacturer. Mounting and proper fitment is where the similarities to the factory exhaust end, however. Fabricated from brushed 100% T304 stainless steel, TIG welded and free of hydroformed pipes the upgraded system is a substantial improvement from its predecessor - both in terms of material/construction as well as in overall looks. When viewed from the rear the difference becomes unmistakable if it was not already apparent. Going from the plebeian stock dual slash cut 90mm (3.5") tips to the massive Dinan straight cut 102mm (4") ones leaves no doubt that something above and beyond is present. This is solidified by the Dinan logo laser engraved on the tips and the deep growl of the exhaust that is indisputably different than anything one would expect to hear from a base 4-cylinder turbo platform.

• Dual 4" (102mm) double-walled, polished clamp-on tips with laser engraved Dinan logo
• Larger diameter piping for increased flow (85mm to dual 60mm vs. 85mm to dual 83mm)
• Drone abatement technologies used to reduce cabin resonance
• Factory-like fitment with included mounting hardware
• Maximum gains of +4 HP and +3 ft-lb of torque
• 100% 304 Stainless Steel construction
• Enjoyably louder, sportier sound
• Retains factory valve control

This Part Fits:

Take your Chevrolet Corvette’s performance and attitude to the next level with the MBRP S7008304BT 3" Muffler Bypass Axle-Back System. Engineered for the 6.2L powerhouse, this system delivers an aggressive muscle car tone that commands attention while maintaining compatibility with your OEM AFM actuators.Crafted from durable T304 stainless steel and featuring smooth mandrel-bent tubing, this axle-back system is built for maximum flow and longevity. The kit includes four sleek black tips for a bold, finished look that matches your Corvette’s style.Installation is a breeze with a bolt-on design, so you can spend less time in the garage and more time on the road. Please note: tuning may be required.

• Durable T304 Stainless Steel Construction. Smooth Mandrel Bent tubing. Aggressive Muscle car sound. Four black tips included. Retains OEM AFM actuators. Bolt-on installation.
• Durable T304 Stainless Steel Construction
• Aggressive Muscle Car Sound
• Smooth Mandrel Bent Tubing
• Retains OEM AFM Actuators
• Four Back Tips Included
• Bolt-On Installation

This Part Fits:

Fits 2024-2026 Toyota Tacoma models including SR, SR5, Limited, TRD Sport, TRD Off-Road, TRD PreRunner, TRD Pro, and Trailhunter (L4-2.4L).

The aFe Power ROCK BASHER axle-back exhaust system is engineered for off-road enthusiasts who require maximum ground clearance without sacrificing performance. The system features a specialized hi-tuck tip designed to stay clear of obstacles during steep climbs or descents, protecting your exhaust components from damage on rough terrain. Constructed from 2-1/2 inch mandrel-bent 409 stainless steel tubing, it provides a smooth, unrestricted path for exhaust gases, resulting in a deeper, more aggressive exhaust note.

Built for long-term durability in harsh environments, this system is 100% MIG-welded for race-proven strength. Installation is a straightforward bolt-on process that utilizes factory-style flanges and hangers, requiring no cutting or permanent modifications to the vehicle's chassis for a secure, hassle-free fit.

• 2-1/2 inch mandrel-bent 409 stainless steel tubing for maximum strength and flow
• Hi-tuck tip design improves departure angles and protects the system during off-road maneuvers
• 100% MIG-welded for superior structural integrity and durability
• Direct bolt-on installation using factory mounting points and flanges
• CAD designed for precise vehicle-specific fitment

Fits 2024 Ford Mustang GT and EcoBoost models.

The Roush Performance Dual Tip Axle-Back Exhaust System is designed to enhance the acoustic profile and rear-end aesthetics of the S650 platform. By replacing the restrictive factory muffler assembly with high-flow units, this system provides a more aggressive, performance-oriented exhaust note that reflects the Mustang's heritage without compromising daily drivability.

• Dual-tip configuration featuring a durable black finish for a stealthy, custom look
• Precision-engineered for the 2024 Ford Mustang GT (5.0L) and EcoBoost (2.3L)
• Axle-back design allows for a straightforward installation using factory mounting points
• Corrosion-resistant construction designed for long-term durability and heat management
• Includes all necessary hardware required for a complete bolt-on installation

Engineered to deliver a refined yet powerful sound, this Roush exhaust system is the ideal upgrade for owners looking to distinguish their Mustang through both tone and style. The system is built to tight tolerances to ensure a perfect fit and clear exit through the factory rear valance.

Fits 2018-2025 Ford Mustang GT models.

This Roush axle-back exhaust system is engineered to provide your Mustang GT with a more aggressive, performance-oriented sound profile. By replacing the restrictive factory mufflers, this system enhances the natural exhaust note of the vehicle while adding a custom look with signature black-coated tips. The axle-back configuration is designed to bolt directly to the factory tubing, making it a straightforward upgrade for owners looking to improve both the acoustics and the rear-end aesthetics of their vehicle.

• Direct fit for 2018-2025 Ford Mustang GT
• Features premium black-finished exhaust tips for a stealthy appearance
• Axle-back design replaces factory mufflers while retaining mid-section piping
• Engineered for an aggressive Roush exhaust tone
• Utilizes factory mounting points for a clean installation

Fits 2015-2026 Ford Mustang V6 and 2.3L EcoBoost models.

Give your Mustang a more aggressive auditory presence with the Roush Axle-Back Exhaust system. This kit is engineered to replace the restrictive factory rear mufflers, reducing backpressure and unleashing the signature Roush growl that distinguishes your car from the stock crowd. Designed specifically for the V6 and EcoBoost platforms, it provides a deep, sporty tone that complements the turbo and naturally aspirated engines without excessive cabin drone.

• Features dual black-coated exhaust tips for a refined, stealthy aesthetic
• Optimized exhaust flow for improved throttle response
• Durable construction engineered for long-term environmental resistance
• Utilizes factory hanger locations for a secure, professional fit
• Includes all necessary hardware for a complete installation

Fits 2011-2014 Ford Mustang (V6-3.7L).

Give your S197 Mustang a more aggressive acoustic profile and a custom look with the Roush Axle-Back Exhaust system. Engineered to replace the restrictive factory mufflers, this kit delivers a deeper, performance-oriented tone under acceleration while maintaining street-friendly manners during cruising. The dual black-coated tips provide a stealthy, high-end appearance that integrates perfectly with the factory rear valance.

• Direct bolt-on replacement that utilizes factory mounting points and hangers
• Engineered to provide an aggressive exhaust note without excessive interior cabin drone
• Includes dual black-coated stainless steel exhaust tips
• Mandrel-bent tubing ensures optimized exhaust gas flow
• Designed specifically for the 3.7L V6 powertrain for precise fitment

Fits 2011-2014 Ford Mustang GT (V8-5.0L).

Give your S197 a signature aggressive tone with the Roush Axle-Back Exhaust system. This kit replaces the restrictive factory mufflers with high-flow, open-chamber units that provide a deep, race-inspired growl under throttle without excessive cabin drone during highway cruising. It is an ideal solution for owners looking to improve the acoustic profile and exhaust flow of their 5.0L Coyote engine.

The system is constructed from durable, mandrel-bent 409 stainless steel for excellent corrosion resistance and heat management. To complete the look, it features dual 4-inch T-304 stainless steel tips finished in a sleek black coating for a refined, stealthy aesthetic. This exhaust is a direct bolt-on upgrade that utilizes the factory mounting points and exhaust hangers, requiring no welding for installation.

• High-flow, open-chamber muffler design for aggressive sound
• Mandrel-bent 409 stainless steel tubing for optimized flow
• Dual 4-inch T-304 stainless steel tips with black coating
• Direct bolt-on installation using factory hanger locations
• Corrosion-resistant materials for long-term durability

Fits 2017 Volkswagen Golf VII R 4Motion (Facelift Model).

Improve the acoustic profile and exhaust flow of your vehicle with the Remus Axle-Back Exhaust system. Specifically engineered for the facelifted Golf VII R, this system replaces the restrictive factory rear silencer to provide a deeper, more resonant exhaust note while maintaining daily drivability. The design focuses on optimizing backpressure to enhance engine response and efficiency.

This kit comes complete with a set of high-quality chrome tailpipes, providing a polished, premium finish that integrates perfectly with the rear bumper cutouts. Built with precision fitment in mind, it utilizes factory mounting points to ensure a clean installation that requires no permanent vehicle modifications.

• Direct axle-back replacement for the factory rear muffler
• Includes a quad-exit chrome tailpipe set for a finished look
• Specifically tuned for the 2.0T engine and 4Motion drivetrain
• High-grade construction for corrosion resistance and durability

Fits 2017 Volkswagen Golf VII R 4Motion Facelift models.

This Remus axle-back exhaust system is engineered to enhance the acoustic profile and exhaust flow of the Golf VII R. By replacing the rear muffler section, this system provides a more resonant, performance-oriented exhaust note while maintaining the refinement expected of a premium daily driver. The kit is designed for a precise fit, utilizing the vehicle's original mounting points for a straightforward installation process.

• Specifically tuned for the 2017 Golf VII R 4Motion (Facelift Model)
• Axle-back design replaces the factory rear muffler assembly
• Includes a high-luster chrome tailpipe set for a refined exterior appearance
• Direct bolt-on fitment with no custom fabrication required
• Maintains compatibility with factory 4Motion drivetrain components

Fits 2017 Volkswagen Golf R Mk VII (Facelift Model).

The Remus Axle-Back Exhaust system provides a sophisticated performance upgrade for the Volkswagen Golf R Mk VII facelift, balancing aggressive acoustics with refined German engineering. This system replaces the factory rear muffler section, optimizing exhaust flow while retaining the vehicle's daily drivability. The included carbon fiber tail pipe set provides a premium, motorsport-inspired finish that complements the Golf R's rear diffuser.

• Specifically engineered for the 2017 VW Golf R Mk VII Facelift
• Includes a complete set of carbon fiber tail pipes
• Precision axle-back configuration
• Designed for direct fitment to factory mounting points
• Manufacturer: Remus

Fits the 2017 BMW M550i xDrive (G30) equipped with the 4.4L N63R engine.

Enhance the acoustic profile and exhaust efficiency of your BMW with this Remus axle-back exhaust system. Precision-engineered for the G30 chassis, this system replaces the factory rear mufflers to provide a deeper, more aggressive exhaust note without compromising daily drivability. The kit is designed to bolt onto the factory mid-section using the included connection tube, ensuring a secure and leak-free fitment.

• Specifically tuned for the 4.4L N63R V8 engine
• Constructed from high-quality stainless steel for long-term durability
• Includes a set of chrome-finished tailpipes for a refined rear aesthetic
• Axle-back design optimizes flow while retaining factory emissions equipment
• Includes necessary connection tube for installation
• Manufacturer Part Number: Remus G30 M550i System

Fits the 2017 BMW M550i xDrive (G30) equipped with the 4.4L N63R engine.

This Remus axle-back exhaust system is precision-engineered to enhance the acoustic profile and exhaust flow of the BMW M550i. Designed to replace the restrictive factory rear mufflers, this system delivers a deeper, more aggressive exhaust note while maintaining cabin comfort during cruising. The kit features high-quality construction and includes a dedicated connection tube for a proper fit into the existing exhaust tract.

• Specifically tuned for the 4.4L N63R V8 engine platform
• Includes a set of high-luster chrome tail pipes for a premium finish
• Optimized internal muffler design to reduce backpressure
• Constructed from corrosion-resistant stainless steel
• Includes necessary connection tube for axle-back installation

Fits the 2017 BMW M550i xDrive (G30) equipped with the 4.4L N63R engine.

Enhance the acoustic profile and exhaust flow of your G30 chassis with this Remus Axle-Back Exhaust system. Designed specifically for the M550i xDrive, this setup replaces the restrictive factory rear muffler sections to deliver a more aggressive, tuned exhaust note without compromising the luxury feel of the vehicle. The kit includes a dedicated connection tube for a seamless installation and is finished with a premium set of carbon fiber tail pipes that provide a high-end, motorsport-inspired aesthetic.

• Direct-fit axle-back configuration for the 2017 BMW M550i xDrive (G30)
• Compatible with the 4.4L N63R V8 engine
• Includes required connection tube for proper exhaust geometry
• Features a set of premium carbon fiber tail pipes for a custom look
• Optimized backpressure reduction and enhanced sound signature

Fits the 2017 BMW M550i xDrive (G30) equipped with the 4.4L N63R engine.

The Remus Axle-Back Exhaust system is engineered to optimize exhaust flow and provide a more aggressive acoustic profile for the G30 M550i. By replacing the restrictive factory rear muffler section and utilizing the included connection tube, this system offers a direct upgrade that improves backpressure characteristics without necessitating a full cat-back replacement.

• System Type: Axle-back exhaust
• Includes: Rear muffler section and connection tube
• Engine Compatibility: 4.4L N63R V8
• Chassis: BMW G30 M550i xDrive
• Installation: Replaces OE rear section for enhanced sound and performance

Fits 2017 BMW M550i xDrive G30 Sedan (4.4L N63R).

Enhance the acoustic profile and exhaust flow of your BMW M550i with this Remus axle-back exhaust system. Specifically engineered for the G30 chassis and the 4.4L N63R V8 engine, this kit replaces the factory rear mufflers to provide a more aggressive, refined exhaust note while maintaining the luxury character of the 5 Series. The system includes a premium chrome tail pipe set for a classic, high-performance aesthetic.

• Specific fitment for 2017 BMW M550i xDrive G30 Sedan
• Optimized for the 4.4L (N63R) V8 engine
• Axle-back configuration for easier installation and sound tuning
• Includes a complete set of polished chrome tail pipes
• Direct replacement for the restrictive factory rear muffler section

Fits the 2017 BMW M550i xDrive G30 Sedan (4.4L N63R).

This Remus axle-back exhaust system is engineered to reduce backpressure and enhance the acoustic profile of the 4.4L N63R V8 engine. By replacing the rear mufflers, this system provides a deeper, more resonant exhaust note while maintaining the refined character expected of a G30 chassis. The kit is designed to bolt directly into place, utilizing factory mounting locations for a precise fit.

This system comes complete with a set of high-luster chrome tailpipes, providing a significant visual upgrade over the standard factory tips. The stainless steel construction ensures long-term durability and resistance to corrosion in various driving conditions.

• System Type: Axle-Back Exhaust
• Tailpipe Finish: Chrome
• Chassis: G30 Sedan
• Engine Compatibility: 4.4L V8 (N63R)
• Installation: Replaces rear mufflers at factory mounting points

Fits the 2017 BMW M550i xDrive G30 Sedan (4.4L N63R).

This Remus axle-back exhaust system is engineered to refine the acoustic profile and exhaust flow of the G30 M550i. By replacing the factory rear mufflers, this system reduces backpressure and delivers a deeper, more resonant exhaust note that complements the 4.4L N63R biturbo V8 without compromising cabin comfort during daily driving. The kit is finished with a premium carbon fiber tail pipe set, providing a high-end, motorsport-inspired aesthetic to the rear of the vehicle.

• Specifically tuned for the 4.4L N63R engine and G30 chassis
• Constructed from high-grade materials for long-term durability and heat resistance
• Direct axle-back configuration utilizes factory-style mounting points
• Includes a complete set of carbon fiber tail pipes for a custom look
• Optimized internal muffler design for improved gas flow and engine response

Fits the 2018 BMW M2 Competition F87N (S55B30 engine) equipped with a Gasoline Particulate Filter (GPF).

The Remus Axle Back Exhaust system is engineered to optimize exhaust flow and deliver a deeper, more resonant acoustic profile for the S55-powered M2 Competition. This system replaces the restrictive factory rear muffler, reducing backpressure while maintaining sophisticated exhaust valve functionality. Finished with a set of four high-polish chrome tail pipes, this setup provides a significant visual and audible upgrade without the drone common in lesser systems.

• Specifically designed for S55B30 engines with GPF
• High-quality stainless steel construction for long-term durability
• Includes a complete set of four chrome tail pipes
• Bolt-on installation to factory mounting points
• Improved exhaust flow and throttle response
• Maintains factory valve control integration

Fits the 2018 BMW M2 Competition F87N (S55B30) equipped with a Gasoline Particulate Filter (GPF).

This Remus axle-back exhaust system is engineered to enhance the acoustic character and exhaust flow of the S55-powered M2 Competition. By replacing the rear muffler section, this system reduces backpressure and provides a deeper, more resonant exhaust note without removing the factory GPF. The high-quality stainless steel construction ensures long-term durability and resistance to heat and corrosion under performance driving conditions.

• Designed specifically for S55B30 models with GPF
• Optimized exhaust flow for improved throttle response
• Includes a set of premium angled chrome tailpipes for a classic finished look
• Precision-engineered for a secure fit to factory mounting points
• High-quality stainless steel construction
• Retains emissions compliance by maintaining the factory GPF

Fits the 2018 BMW M2 Competition (F87N) equipped with the S55B30 engine and Gasoline Particulate Filter (GPF).

This Remus axle-back exhaust system is precision-engineered to improve the acoustic profile and exhaust flow of the S55B30 engine. By replacing the factory rear muffler unit, this system delivers a deeper, more resonant exhaust note while reducing backpressure. The included set of carbon fiber tail pipes provides a premium, motorsport-inspired finish that complements the aggressive styling of the M2 Competition.

• Direct-fit axle-back configuration for the F87N chassis
• Optimized specifically for S55B30 models equipped with a Gasoline Particulate Filter (GPF)
• Includes a quad set of high-quality carbon fiber tail pipes
• Retains factory exhaust valve functionality for sound level adjustability
• Constructed for durability and heat resistance under high-performance driving conditions

Fits 2015 BMW 3 Series Sedan (F30) and Touring (F31) models.

This Remus axle-back exhaust system is precision-engineered to replace the restrictive factory rear muffler, delivering a deeper, more resonant exhaust note without compromising cabin comfort. Designed as a direct-fit upgrade, this system optimizes exhaust flow and reduces backpressure to improve throttle response and engine efficiency.

The system is finished with a premium black chrome tail pipe set, providing a stealthy, high-end appearance that integrates perfectly with the F30/F31 rear valence. Constructed from high-quality materials for long-term durability and corrosion resistance, this Remus system is an ideal solution for owners looking to enhance both the acoustics and the visual profile of their BMW.

• System Type: Axle-back exhaust
• Tip Finish: Black Chrome
• Chassis Compatibility: F30 (Sedan), F31 (Touring)
• Direct fitment to factory mounting points

Fits 2024+ BMW M5 G90 Sedan and G99 Touring models.

The Remus axle-back exhaust system is engineered to enhance the acoustic profile and exhaust flow of the G90 and G99 BMW M5. By replacing the restrictive factory rear muffler with a precision-tuned unit, this system reduces backpressure and provides a more resonant, aggressive exhaust note without sacrificing cabin comfort. Constructed from high-grade stainless steel with a shot-blasted finish, this system is built to withstand high thermal loads while offering a perfect bolt-on fit to the factory mounting points.

• Direct replacement for the factory rear muffler section
• High-quality T304 stainless steel construction for corrosion resistance
• Precision-engineered for the BMW M5 G90 Sedan and G99 Touring chassis
• Optimized internal flow to reduce backpressure
• Retains factory valve control logic where applicable
• Shot-blasted finish for increased surface durability

Fits 2023-2024 BMW M2 (G87).

Enhance the acoustic profile and exhaust flow of your G87 M2 with the Remus Axle-Back Sport Exhaust System. Engineered and manufactured in Austria, this system is designed to replace the restrictive factory muffler with a precision-tuned unit that delivers a deeper, more aggressive tone while optimizing backpressure. The result is improved throttle response and a significant weight reduction compared to the original equipment.

• High-quality stainless steel construction for long-term durability and corrosion resistance.
• Engineered for optimized flow and reduced exhaust backpressure.
• Designed specifically for the BMW M2 (G87) chassis for precise fitment.
• Note: This axle-back unit requires the Remus Connection Tube and a Tail Pipe Set (sold separately) to complete the installation.
• Manufacturer: Remus
• Application: Axle-Back Sport Exhaust

Fits 2024-2026 Ford Mustang GT and GT Premium (5.0L).

Give your S650 Mustang an aggressive, muscle car growl with the MBRP ARMOR BLK Series axle-back exhaust. This 2.5-inch system is engineered for owners seeking a significant acoustic upgrade and a stealthy aesthetic without the cost of full stainless steel. The ARMOR BLK series utilizes heavy-gauge aluminized steel for the main tubing, while the visible tailpipes and tips receive a high-heat black powder coating for superior style and heat resistance.

• 2.5-inch mandrel-bent tubing ensures smooth exhaust flow and maximum performance.
• Dual rear exit with high-heat black powder-coated tips.
• Includes valve actuator brackets to accommodate factory electronics while performing a valve delete.
• Constructed from heavy-gauge aluminized steel (mill finish on hidden sections).
• Direct bolt-on installation replaces restrictive factory rear mufflers.
• 1-year warranty on black finish; 3-year warranty on exhaust components.

Fits 2024-2026 Ford Mustang GT and GT Premium (5.0L).

The MBRP Armor Lite Series axle-back exhaust delivers an aggressive, classic muscle car tone for the S650 Mustang GT. Engineered for enthusiasts seeking maximum flow and sound without the premium price tag of stainless steel, this system is constructed from heavy-gauge aluminized steel. The 2.5-inch tubing is fully mandrel-bent to ensure smooth exhaust gas scavenging and improved engine efficiency. This material is particularly well-suited for vehicles in dry climates that do not encounter heavy road salt or high precipitation.

This axle-back kit features a valve delete design for a consistently bold sound profile. To prevent electronic errors or dash lights, MBRP includes dedicated valve actuator brackets to secure the factory motors. The system terminates in dual-rear quad exhaust tips, giving your Mustang a more menacing, track-ready appearance from behind.

• 2.5-inch mandrel-bent heavy-gauge aluminized steel tubing
• Aggressive muscle car exhaust note
• Includes valve actuator brackets (valve delete design)
• Dual-rear exit with quad exhaust tips
• Direct bolt-on installation to factory mounting points

Fits select 2015-2026 Ford Mustang GT, GT Premium, and GT 50 Years Limited Edition (5.0L).

The MBRP ARMOR BLK Series axle-back exhaust system delivers a refined, mellow exhaust note while improving the aesthetics of your 5.0L Mustang. Engineered for owners in drier climates, this system is constructed from heavy-gauge aluminized steel with mandrel-bent 2.5-inch tubing to ensure smooth, unrestricted flow. By eliminating the rippling found in standard bends, this kit reduces backpressure, increases exhaust velocity, and improves throttle response.

This kit features high-heat black powder coating on the tailpipes and 4-inch OD tips, providing a durable, stealthy finish. The rest of the system utilizes a mill-finish steel for rugged under-vehicle durability and includes fully sealed seams for enhanced rust resistance. Installation is straightforward with a bolt-on design that utilizes your Mustang's factory hangers.

• 2.5-inch mandrel-bent aluminized steel tubing
• Dual 4-inch OD high-heat black powder-coated tips included
• Fully sealed seams for maximum rust resistance
• Mellow performance exhaust note
• Direct bolt-on installation to OEM hangers
• Includes 3-year warranty on the system and 1-year warranty on the finish

Fits 2015-2026 Ford Mustang GT, GT Premium, and 50 Years Limited Edition models.

The MBRP Armor Pro Series axle-back exhaust is engineered for enthusiasts who demand maximum material durability and a refined sound profile. Crafted from premium T304 stainless steel, this system is designed to withstand the most extreme environmental conditions and road salt while remaining easy to maintain. The 2-1/2 inch mandrel-bent tubing ensures unrestricted exhaust flow by eliminating the rippling and restrictions found in standard crush-bent pipes, assisting in lower exhaust gas temperatures and improved throttle response.

This bolt-on kit delivers a mellow, sophisticated exhaust note that provides a performance presence without overwhelming the cabin. The system is finished with dual 4-inch OD stainless steel tips for a significant visual upgrade over the factory hardware. Installation is straightforward, utilizing the vehicle's factory mounting points and OEM hangers.

• Series: Armor Pro
• Material: T304 Stainless Steel
• Tubing Diameter: 2-1/2 Inch
• Tip Size: 4-Inch OD (Outer Diameter)
• Tip Material: Stainless Steel
• Exhaust Note: Mellow
• Construction: Mandrel-bent tubing
• Installation: Bolt-on design, utilizes OEM hangers
• Warranty: Lifetime Manufacturer Warranty

Fits 2015-2026 Ford Mustang EcoBoost and EcoBoost Premium models (2.3L).

The MBRP ARMOR BLK Series Race Version axle-back exhaust is engineered to deliver an aggressive, high-performance exhaust note while maximizing flow for the 2.3L EcoBoost engine. By replacing the restrictive factory mufflers with 2.5-inch mandrel-bent tubing, this system achieves an exhaust flow increase of up to 86%. The mandrel-bending process ensures consistent tubing diameter through every curve, preventing the rippling and turbulence that can bottleneck performance in lesser systems.

Built for durability in dry climates, the system is constructed from heavy-gauge aluminized steel with fully sealed seams to resist rust. The ARMOR BLK series features a specialized high-heat black powder coating on the visible tailpipes and tips for a stealthy, custom look, while the under-chassis components remain mill-finished for robust protection. This bolt-on upgrade provides the perfect balance of signature MBRP styling and a track-inspired soundtrack.

• Series: ARMOR BLK (Armor Black)
• System Type: Axle-Back
• Version: Race Version (Aggressive Tone)
• Tubing Diameter: 2.5-inch
• Exit Configuration: Dual Split Rear Exit
• Material: Heavy-Gauge Aluminized Steel
• Finish: High-Heat Black Powder Coated Tips and Tailpipes
• Performance: Up to 86% Flow Increase
• Hardware: Includes all necessary hangers and clamps for installation
• Warranty: 3-Year Structural / 1-Year Coating

Fits 2015-2026 Ford Mustang EcoBoost and EcoBoost Premium models (2.3L).

MBRP’s Armor Pro Series Race Version axle-back exhaust system is engineered for drivers seeking the most aggressive tone and maximum durability for their turbocharged Mustang. Crafted from premium T304 stainless steel, this 2.5-inch system is resistant to corrosion and oxidation, making it the ideal choice for vehicles operated in extreme climates or salted road conditions.

The system features mandrel-bent tubing to eliminate restrictions and rippling, allowing for up to an 86% increase in exhaust flow over the factory setup. This reduction in backpressure improves cylinder scavenging and overall engine efficiency. To complement the aggressive sound profile, the system is finished with dual carbon fiber-sleeved stainless steel tips that provide a high-end, performance-oriented aesthetic.

• 2.5-inch mandrel-bent T304 stainless steel construction
• Aggressive Race Version sound profile
• Up to 86% increase in exhaust flow
• Dual carbon fiber over stainless steel tips
• Direct-fit axle-back design
• Armor Pro Series lifetime warranty