The Aeromotive VaporWorx ReturnX Pulse Width Modulation (PWM) Controller Kit (66166) provides advanced fuel pump management for dual-pump, naturally aspirated (NA) fuel systems. By modulating pump speed based on actual engine demand, this controller reduces fuel heating and noise while extending the service life of your high-performance fuel pumps.

This ReturnX system is designed to maintain precise fuel pressure without the complexity of a traditional return-style plumbing setup. It allows dual pumps to run efficiently at lower speeds during cruise or idle, instantly ramping up to full capacity under load. This kit is a critical component for maintaining stable fuel delivery in modern EFI conversions and high-output NA builds.

• Compatible with dual-pump configurations
• Optimized specifically for naturally aspirated (NA) engines
• Advanced Pulse Width Modulation (PWM) technology reduces fuel heat soak and pump wear
• Maintains consistent fuel pressure under varying load conditions
• Includes necessary wiring and control logic for dual-pump setups
• Manufacturer Part Number: 66166

The Aeromotive VaporWorx ReturnX Pulse Width Modulation (PWM) Controller Kit (66171) provides precision fuel delivery management for high-horsepower supercharged applications. Running triple or quad fuel pumps at full duty cycle during idle or cruise leads to excessive fuel heating, aeration, and premature pump wear. This controller solves those issues by modulating pump speed based on real-time engine demand.

Specifically engineered for use with Radium Engineering Triple (3x) and Quad (4x) Fuel Pump Surge Tank systems, this kit ensures your fuel system remains cool and stable during daily driving while instantly providing maximum flow when boost levels rise. It is a critical component for maintaining fuel system integrity in forced induction setups where demand fluctuates significantly.

• Specifically designed for Radium Engineering 3x and 4x Fuel Pump Surge Tank Systems
• Pulse Width Modulation (PWM) scales pump output to match engine load
• Reduces fuel system heat soak and prevents fuel cavitation
• Optimized for supercharged engine configurations
• Manufacturer Part Number: 66171

The Aeromotive VaporWorx Dual Fuel Pump Returnless Pulse Width Modulation (PWM) Fuel Module Controller Kit provides precision, demand-based control for high-output fuel systems. By utilizing PWM technology, this system regulates fuel pressure by varying pump speed rather than relying on a traditional mechanical regulator and return line. This effectively eliminates fuel heating issues and aeration common in high-flow setups.

This kit is engineered to manage dual fuel pump configurations, ensuring consistent rail pressure while minimizing electrical draw and pump wear during low-demand periods like idling or cruising. It allows for a simplified, cleaner installation by reducing the amount of plumbing required in the engine bay and along the chassis.

• Manufacturer: Aeromotive
• Series: VaporWorx
• Part Number: 66138
• Control Type: Pulse Width Modulation (PWM)
• System Configuration: Returnless
• Pump Compatibility: Dual Fuel Pump Systems
• Included Components: PWM controller module, specialized wiring harness, and installation hardware

The Aeromotive VaporWorx Gen 2 Fuel Module Controller Kit (66141) provides precise electronic control for high-performance CTS-V fuel modules in returnless pulse width modulation (PWM) configurations. By modulating pump speed based on real-time engine demand, this system eliminates the need for a traditional return line and external pressure regulator, significantly reducing fuel tank heat soak and power consumption.

• Specifically designed for compatibility with Gen 2 Cadillac CTS-V fuel pump modules
• Full Pulse Width Modulation (PWM) speed control reduces fuel aeration and pump noise
• Returnless system design simplifies fuel plumbing and prevents fuel heating
• Maintains consistent pressure delivery without mechanical bypass regulation
• Engineered for high-demand EFI applications where fuel temperature management is critical
• Manufacturer Part Number: 66141

The Aeromotive VaporWorx Triple Fuel Pump Returnless Pulse Width Modulation (PWM) Fuel Module Controller Kit provides advanced pressure management for high-performance fuel systems. By utilizing PWM technology, this controller varies the speed of triple pump configurations to match real-time engine demand, effectively eliminating the need for a traditional return line and external regulator.

This system solves the common issue of fuel heating and excessive electrical load by preventing the pumps from running at 100% duty cycle during idle and cruising. The result is a quieter fuel system, increased pump longevity, and consistent fuel rail pressure across all driving conditions.

• PWM Control: Adjusts pump speed based on demand to minimize fuel heat soak and power consumption.
• Triple Pump Compatibility: Specifically engineered to manage the high-current demands of triple fuel pump modules.
• Returnless Design: Simplifies vehicle plumbing by removing the return line while maintaining precise pressure control.
• Enhanced Reliability: Reduces mechanical wear on fuel pumps by avoiding unnecessary high-speed operation at low loads.

The Aeromotive VaporWorx Fuel Module Controller Kit provides a sophisticated solution for managing high-performance fuel delivery in the Ford Mustang GT. By utilizing Pulse Width Modulation (PWM) technology, this controller regulates fuel pump speed to match real-time engine demand, maintaining consistent pressure without the need for a traditional return line or external regulator.

This "returnless" approach significantly reduces fuel tank heat soak and prevents fuel aeration, ensuring your engine receives cool, stable fuel under all driving conditions. The VaporWorx system integrates seamlessly with the fuel module to provide OEM-level drivability with aftermarket performance capabilities, making it an essential upgrade for forced induction or high-horsepower builds.

• Pulse Width Modulation (PWM) control eliminates the need for fuel return lines and regulators
• Reduces fuel pump heat buildup, noise, and power consumption
• Maintains precise fuel pressure across the entire RPM and load range
• Specifically engineered for Ford Mustang GT fuel modules
• Includes PWM controller, wiring harness, and installation instructions

The Aeromotive TVS Brushless Spur 10.0 In-Tank Fuel Pump Module (MPN 18055) is a high-performance fuel delivery solution engineered for demanding racing and street applications. By combining brushless motor technology with a precision spur gear design, this module delivers high-volume flow with significantly less current draw and heat generation than traditional brushed pumps.

• Brushless Motor Technology: Features a True Variable Speed (TVS) controller to adjust fuel delivery based on demand, reducing fuel heating and extending pump longevity.
• Spur Gear Design: Provides consistent, high-pressure fuel flow with aerospace-grade tolerances for maximum reliability under load.
• Integrated Fuel Cell Pickup: Designed for in-tank installation with a dedicated pickup to ensure stable fuel scavenging in high-G environments.
• Engineering Excellence: Built using Aeromotive’s meticulous aerospace procedures to meet the highest standards of performance fuel delivery.
• Manufacturer Part Number: 18055

The Aeromotive VaporWorx ReturnX Pulse Width Modulation (PWM) Controller Kit (MPN 66172) is engineered for precise fuel delivery management in high-horsepower, supercharged applications utilizing a triple-pump configuration. By varying the pump speed based on real-time engine demand, this controller eliminates the common issues associated with running high-volume pumps at 100% duty cycle during idle or low-load cruising.

• Precision Management: Specifically calibrated to synchronize triple pump setups for consistent fuel pressure under extreme forced induction loads.
• Heat Mitigation: Significantly reduces fuel temperatures by preventing constant high-volume recirculation, protecting against vapor lock and pump cavitation.
• Extended Service Life: Reduces mechanical wear on the pump internals and lowers the total current draw on the vehicle’s electrical system.
• VaporWorx Technology: Leverages advanced PWM logic to provide a stable, returnless-style control within a ReturnX-equipped fuel system.

The kit includes the VaporWorx ReturnX controller module and necessary integration hardware to optimize your fuel system for both peak performance and long-term reliability.

The Aeromotive VaporWorx Ally Auto-On Pulse Width Modulation (PWM) Controller Kit is engineered to provide precise fuel delivery management for high-performance supercharged applications. By modulating pump speed based on real-time engine demand, this controller significantly reduces fuel heating and amperage draw during idle and cruising, while ensuring maximum flow as boost pressure rises.

Designed for use with one or two fuel pumps, the Ally system eliminates the need for restrictive return lines in many applications and prevents the premature wear associated with running pumps at a constant 100% duty cycle. This kit provides the sophisticated electronics required to maintain stable fuel pressure across the entire RPM range of a forced induction engine.

• Manufacturer Part Number: 66188
• Control Type: Pulse Width Modulation (PWM) with Auto-On functionality
• Pump Compatibility: Supports single or dual (1-2) pump configurations
• Application: Optimized for supercharged induction systems
• Hardware: Includes necessary controller module and wiring components
• Performance: Reduces fuel tank temperatures and extends pump service life

Designed for Ford Coyote engine platforms, the Aeromotive VaporWorx Returnless Pulse Width Modulation (PWM) Fuel Module Controller Kit provides precise fuel pressure management without the need for a traditional return line. By modulating the pump's speed based on real-time demand, this system significantly reduces fuel heating and minimizes power consumption, ensuring consistent performance for high-output EFI applications.

• PWM Efficiency: Eliminates the need for a return line and external regulator, reducing plumbing complexity and fuel heat soak.
• Targeted Application: Specifically engineered for Ford Coyote fuel module integration.
• Pump Longevity: Reduces wear on the fuel pump by only operating at the speed necessary for current engine load.
• Complete Solution: Includes the VaporWorx controller, necessary wiring harness, and pressure sensor for a streamlined installation.
• MPN: 66137

The Aeromotive VaporWorx ReturnX Pulse Width Modulation (PWM) Controller Kit (MPN 66164) provides precise fuel pump speed control for single-pump supercharged applications. By adjusting pump output based on real-time engine demand, this system allows for efficient fuel delivery while significantly reducing fuel heating, noise, and electrical system load.

Unlike traditional systems that run the pump at 100% duty cycle constantly, the VaporWorx ReturnX uses PWM technology to vary the pump speed. This is especially critical in supercharged setups where fuel demand fluctuates rapidly between vacuum and boost. The controller monitors manifold pressure to ensure the pump provides the exact volume required for your horsepower level without recirculating excessive fuel or causing cavitation.

• Designed specifically for single-pump fuel systems in supercharged configurations
• Pulse Width Modulation (PWM) technology varies pump speed based on demand
• Reduces fuel temperatures and prevents vapor lock by minimizing fuel recirculation
• Extends fuel pump service life by reducing mechanical wear during idle and cruise
• Lower electrical current draw compared to full-speed pump operation
• Manufacturer Part Number: 66164

The Aeromotive VaporWorx DualX OEM Ally Returnless Pulse Width Modulation (PWM) Fuel Module Controller Kit, MPN 66182, is a sophisticated fuel management solution designed to provide precise fuel delivery without the need for a return line. By utilizing PWM technology, this controller adjusts fuel pump speed in real-time based on demand, which significantly reduces fuel tank heat soak and prevents fuel aeration.

This DualX system is specifically engineered to interface with OEM Ally fuel modules, making it an ideal choice for high-performance builds that require upgraded fuel flow while maintaining factory-style integration. The system's returnless architecture simplifies plumbing and ensures that the fuel pump only works as hard as necessary, extending component life and improving system efficiency.

• Manufacturer Part Number: 66182
• Control Type: Returnless Pulse Width Modulation (PWM)
• System Series: VaporWorx DualX
• Application: Compatible with OEM Ally fuel module configurations
• Function: Manages dual pump speed to maintain constant pressure and reduce heat
• Included: PWM controller, required wiring harness, and installation hardware

The Aeromotive VaporWorx Gen 5 ZL1 Returnless Pulse Width Modulation (PWM) Fuel Module Controller Kit (MPN 66136) provides precise fuel pressure management for high-performance applications. By utilizing PWM technology, this controller adjusts the fuel pump speed based on real-time engine demand. This significantly reduces fuel heating and power consumption compared to traditional constant-voltage returnless setups.

This kit is specifically engineered to integrate with Gen 5 ZL1 fuel modules, allowing for a clean, returnless plumbing configuration while maintaining the reliability and response needed for high-horsepower builds. The system eliminates the need for a return line and external regulator, simplifying your fuel system architecture without sacrificing performance or pump longevity.

• Manufacturer Part Number: 66136
• Application: Optimized for Gen 5 ZL1 fuel modules
• Control Method: Pulse Width Modulation (PWM) for variable speed operation
• System Compatibility: Designed for returnless fuel configurations
• Benefits: Minimizes fuel tank heat soak and reduces electrical system load

The Aeromotive 19003 Brushless Spur Gear Fuel Pump provides a high-volume, 5.0 GPM fuel delivery solution engineered for demanding high-performance applications. Designed for in-tank mounting, this pump features a 90-degree outlet to accommodate tight clearances and simplified plumbing. By utilizing brushless motor technology, this unit offers increased efficiency, reduced heat soak, and a significantly longer service life compared to traditional brushed pumps.

This kit includes the Aeromotive True Variable Speed (TVS) Controller, which manages pump output to match engine demand. This eliminates the need for pulse-width modulation (PWM) through external relays and prevents fuel heating issues during low-load conditions. The spur gear mechanism ensures precise, consistent flow even at high pressures, making it an ideal choice for forced induction or high-horsepower builds requiring reliable fueling.

• Manufacturer Part Number: 19003
• Flow Rate: 5.0 GPM (Gallons Per Minute)
• Spur gear design for high-pressure stability
• True Variable Speed (TVS) Controller included
• Efficient brushless motor reduces amperage draw and fuel heating
• 90-degree outlet configuration for in-tank installation

Fits select 2016-2022 Cadillac ATS-V, CTS-V, and Chevrolet Camaro (LT / SS).

The Aeromotive 18076 Triple 450 Series Stealth In-Tank Fuel Pump is a high-performance fuel delivery solution designed for extreme output requirements. This system integrates a triple 450 LPH pump configuration into a single stealth assembly, allowing for high-volume fueling while utilizing the factory fuel tank. Engineered with aerospace-grade tolerances, this drop-in unit solves fuel starvation issues in high-horsepower applications without the need for complex external surge tanks or noisy external pumps.

Aeromotive utilizes decades of track experience to ensure consistent fuel pressure and flow under demanding conditions. The in-tank design provides a quieter operation and keeps the pumps submerged in fuel for better thermal management and longevity.

• Triple 450 LPH pump configuration for maximum flow capacity
• Stealth series design for clean, drop-in installation
• Aerospace-grade engineering and meticulous tolerances
• Maintains factory fuel tank functionality and baffling
• Manufacturer Part Number: 18076

The Aeromotive TRV 6 Gallon Fuel Cell offers a compact and highly efficient fuel delivery solution for performance-oriented builds. This unit integrates the Brushless Spur 10.0 Gear Pump directly into the cell, eliminating the need for external mounting and complex plumbing. Built with aerospace-grade tolerances, the brushless motor technology provides superior durability and performance while significantly reducing current draw and fuel heating compared to traditional brushed pumps.

Designed for high-horsepower applications, the Spur 10.0 gear mechanism ensures consistent flow and pressure stability even in demanding track or street environments. This self-contained system simplifies your fuel layout while providing the precision engineering Aeromotive is known for in professional motorsports.

• Manufacturer Part Number: 18647
• Capacity: 6 Gallon
• Series: TRV with Brushless Spur 10.0
• Pump Design: Internal Brushless Spur Gear
• Construction: High-strength fuel cell with integrated baffle system
• Engineered for high-performance EFI and carbureted applications

Fits 1999-2002 Chevrolet Camaro Base, Z28, and Z28 SS models.

The Aeromotive Phantom Series 340lph Direct Drop-In Fuel Pump (19101) is engineered to solve the fuel delivery limitations of the factory F-Body fuel system. This unit replaces the stock pump assembly with a high-performance 340lph internal pump, utilizing aerospace-grade tolerances to ensure precise fuel flow and pressure for modified engines.

Designed for straightforward installation, this drop-in assembly eliminates the need for extensive tank modifications while providing the volume required for high-horsepower builds. Aeromotive draws on three generations of track experience to deliver a fueling solution that maintains reliability under high-demand street or track conditions.

• 340lph flow rate supports high-performance naturally aspirated and forced induction setups
• Direct drop-in fitment for 1999-2002 Chevrolet Camaro fuel tanks
• Engineered with aerospace tolerances for consistent performance and durability
• Manufacturer Part Number: 19101

Fits 1986-1998 Ford Mustang GT, GTS, LX, and SVT Cobra/Cobra R models.

The Aeromotive 19139 fuel pump and hanger assembly is a high-performance fuel delivery solution designed specifically for Fox Body and SN95 Mustang platforms. This drop-in assembly features a high-output 450 fuel pump integrated into a precision-engineered hanger, eliminating the need for complex custom fabrication when upgrading your EFI fuel system. Built with aerospace-grade tolerances, this unit ensures reliable fuel flow under demanding track and street conditions.

• Complete drop-in fuel pump and hanger assembly
• High-flow 450 fuel pump for performance EFI applications
• Direct fit for factory 1986-1998 Mustang fuel tanks
• Precision engineered for consistent fuel delivery and pressure
• Replaces worn or restrictive factory fuel hangers
• Manufacturer Part Number: 19139

The Aeromotive 15 Gallon Eliminator Stealth Fuel Cell (MPN 18662) delivers professional-grade fuel management by integrating a high-performance Eliminator fuel pump directly into a 15-gallon reservoir. This all-in-one Stealth system eliminates the complexity of external pump mounting while ensuring the pump remains submerged and cool for consistent fuel delivery under extreme track conditions.

Engineered with meticulous aerospace tolerances, this fuel cell utilizes Aeromotive's proven internal baffling to prevent fuel slosh and starvation during high-G cornering and acceleration. Whether you are building a high-horsepower street car or a dedicated track machine, this unit provides the reliability required for demanding fuel systems.

• Manufacturer Part Number: 18662
• Capacity: 15 Gallons
• Series: Eliminator Stealth
• Internal baffling for superior fuel slosh control
• Integrated high-flow Eliminator fuel pump for EFI or carbureted applications
• Designed with aerospace-grade tolerances and procedures

The Aeromotive 13147 Universal EFI Regulator and Filter Combo simplifies your fuel system plumbing by integrating a high-performance pressure regulator with a 10-micron filtration element into a single, compact housing. This dual-purpose design reduces the number of required fittings and potential leak points in the engine bay while ensuring your fuel injectors are protected from microscopic debris.

Built for universal EFI applications, this assembly features AN-06 flare ports for reliable, high-pressure connections. It provides the precise fuel pressure control necessary for consistent engine performance, making it an ideal choice for custom builds and fuel system upgrades where space is at a premium.

• Manufacturer Part Number: 13147
• System Type: EFI (Electronic Fuel Injection)
• Filter Rating: 10 Micron
• Inlet/Outlet/Return Attachments: AN-06 Flare
• Design: Combined regulator and filter housing
• Application: Universal

The Aeromotive A1000 Adjustable EFI Fuel Pressure Regulator (MPN 13140) delivers precise pressure control for medium to high horsepower applications. This redesigned body features a compact profile and reduced weight while maintaining the high-flow performance required for A1000 series and smaller fuel pumps. Constructed with a deep, bright-dip black anodized finish on the cap and base, it is engineered for long-term durability in demanding environments.

This regulator is fully compatible with gasoline, ethanol (E85), methanol, and diesel fuels. It features a 1:1 vacuum/boost reference ratio, making it an ideal solution for forced induction setups where fuel pressure must rise in sync with manifold pressure. Plumbing is handled via two -10 ORB inlet/outlet ports and one -6 ORB return port, ensuring high-volume flow and easy installation with O-ring boss fittings.

• Adjustable base pressure range: 40-75 PSI
• 1:1 vacuum/boost reference ratio
• Inlet/Outlet Ports: (2) -10 AN ORB
• Return Port: (1) -6 AN ORB
• 1/8" NPT dedicated gauge port
• Compatibility: Gas, Ethanol, Methanol, and Diesel
• Finish: Black Anodized
• Manufacturer Part Number: 13140

The Aeromotive A2000 Drag Race Fuel Pump is a high-volume solution engineered for serious carbureted applications, from Stock Eliminator to nitrous-fed Pro Mod. This high-torque, low-RPM motor design delivers over 350 GPH free flow while maintaining lower current draw than other pumps in its class.

Featuring the industry's only integral diaphragm-controlled adjustable bypass valve, the A2000 dampens pressure spikes more effectively than traditional poppet-style designs. This ensures smoother, more consistent fuel pressure at the regulator and carburetor, contributing to more predictable E.T.s. The proprietary seal design provides leak-free operation and full compatibility with both gasoline and alcohol fuels.

• Performance: Over 350 GPH free flow
• Bypass Valve: Integral, adjustable diaphragm-controlled design
• Inlet/Outlet Ports: ORB-10
• Return Port: ORB-8
• Gauge Port: 1/8" NPT
• Fuel Compatibility: Gasoline and Alcohol/Methanol
• Mounting: Multiple bolt patterns for versatile chassis installation
• Manufacturer Part Number: 11202

Professionalize your workspace or track setup with this official Aeromotive High Performance Fuel Systems shop banner. Measuring 32 inches by 92 inches, this large-format banner features the iconic Aeromotive branding in a high-contrast black and red color scheme. It is designed to provide a clean, authoritative look for any performance-oriented setting, from professional garages to trackside pits.

• Manufacturer Part Number: 95012
• Dimensions: 32in x 92in
• Color Scheme: Black and Red
• Material: High-durability display vinyl
• Usage: Ideal for workshops, showrooms, and racing events

The Aeromotive 24303 High Flow Brushed Coolant Pump provides reliable fluid transfer for high-performance street and track applications. Designed as a universal remote-mount solution, this pump is ideal for vehicles where factory cooling systems are inadequate or custom plumbing requires a remote-mounted configuration.

This electric water pump is engineered to deliver a consistent 27gpm flow rate while maintaining a lower amperage draw than leading competitors, reducing the load on your vehicle's electrical system. Utilizing Aeromotive's extensive expertise in high-pressure fluid delivery, this unit features a durable brushed motor design and AN-12 ports for secure, leak-free connections.

• Flow Rate: 27gpm
• Inlet/Outlet Size: AN-12
• Configuration: Universal Remote Mount
• Motor Type: Brushed
• Efficient low-amp draw design
• Manufacturer Part Number: 24303

The Aeromotive 24302 High Flow Brushed Coolant Pump is engineered for high-performance fluid transfer in street and track applications where factory mechanical pumps are insufficient. This universal remote-mount solution provides a consistent 27 GPM flow rate, designed to optimize cooling efficiency while maintaining a lower amperage draw than comparable units.

Constructed with the same precision engineering found in Aeromotive's fuel delivery systems, this coolant pump features a robust brushed motor and standard 3/4" NPT inlet and outlet ports. Its compact design allows for flexible placement in crowded engine bays or specialized cooling circuits, ensuring reliable thermal management under demanding conditions.

• Flow Rate: 27 GPM
• Inlet/Outlet Size: 3/4" NPT
• Motor Type: High-efficiency brushed motor
• Mounting Style: Universal remote mount
• Part Number: 24302

The Aeromotive 28-Tooth Fuel Pump Drive Pulley (21109) is a precision-engineered component designed for high-output fueling requirements. This pulley serves as the mechanical link for belt-driven fuel pump systems, ensuring synchronized power transfer and consistent fuel delivery across the entire RPM range.

• 28-tooth configuration allows for precise drive ratio adjustments in belt-driven systems
• Manufactured with aerospace-grade tolerances to ensure minimal runout
• Engineered for use with Aeromotive belt-drive fuel pumps and compatible drive mandrels
• Robust construction designed to withstand the stresses of high-performance racing applications
• Manufacturer Part Number: 21109

The Aeromotive 19004 Brushless Spur Gear In-Tank Fuel Pump is engineered for high-demand applications requiring precise fuel delivery and extreme reliability. Featuring a 90-degree outlet configuration, this pump utilizes a brushless motor design to increase efficiency and significantly reduce heat soak compared to traditional brushed pumps.

This system includes the Aeromotive True Variable Speed (TVS) Controller, which manages pump RPM based on engine demand to maintain optimal fuel temperature and prevent cavitation. The spur gear mechanism provides a consistent 7gpm flow rate, making it an ideal solution for high-horsepower forced induction or naturally aspirated builds that demand stable fuel pressure under load.

• Manufacturer Part Number: 19004
• Flow Rate: 7 gallons per minute (gpm)
• Motor Type: Brushless for reduced heat and increased lifespan
• Pump Design: High-efficiency spur gear
• Orientation: 90-degree in-tank mounting
• Included Controller: TVS (True Variable Speed) controller for dynamic pump management

Fits 1968-1969 Dodge Charger (Base, 500, R/T, SE, and Daytona).

The Aeromotive 18859 Hellcat Swap Fuel Tank provides a specialized fueling solution for builders installing the high-output Hellcat engine into classic 1968-1969 Dodge Charger platforms. This tank is designed to simplify EFI conversions by providing a direct-fit replacement that accommodates the high-volume fuel demands of the supercharged HEMI platform, ensuring the system can support the horsepower levels associated with modern crate engine swaps.

• Engineered specifically for Hellcat engine swaps in B-Body Charger models.
• Replaces the factory fuel tank while utilizing original mounting points for a clean installation.
• Designed to meet high-performance fuel delivery and modern EFI system requirements.
• Manufacturer Part Number: 18859

Ensure your Aeromotive fuel system reaches the correct depth with the Phantom Extension Kit (MPN 18788). This kit is specifically engineered to extend the reach of Phantom Apex baffled fuel pump assemblies, allowing for proper fitment in deeper fuel tank applications where standard height components may fall short.

Built to Aeromotive's exacting aerospace tolerances, this extension maintains the structural integrity and performance of your fuel delivery system. It is a critical component for custom tank builds or deep OE tanks requiring the high-volume flow of the Phantom Apex series.

• Manufacturer Part Number: 18788
• Designed specifically for Aeromotive Phantom Apex kits 18688 and 18689
• Extends the baffled pump assembly for deeper fuel tank depths
• High-quality construction ensures reliable fuel delivery under demand
• Includes necessary components for seamless integration with existing Phantom hardware

Upgrade your vehicle's fuel system with the Aeromotive Cobra Top Fuel Tank (MPN 18690), specifically designed for select 1986-1998 Ford Mustang models. Fits 1986-1998 Ford Mustang including Base, GT, GTS, LX, SVO, SVT Cobra, and Cobra R models.

Engineered using aerospace tolerances and procedures, this fuel tank provides a performance-oriented foundation for your Mustang's fuel delivery system. It is designed to accommodate Cobra-style top-mounting fuel pump assemblies, ensuring reliable delivery even in demanding track or high-performance street applications. As a direct-fit replacement for the factory unit, it maintains the structural integrity and mounting geometry required for a professional installation.

• Direct fit for 1986-1998 Ford Mustang chassis (Fox Body and SN95)
• Designed for use with Cobra-style top-hat fuel pump configurations
• Manufactured to aerospace-grade tolerances for superior reliability
• Manufacturer Part Number: 18690
• Includes fuel tank only; additional pump components sold separately