The ARB Air Filter Assembly is designed to provide critical protection for pneumatic systems and components operating in harsh, dust-heavy environments. By capturing fine particulates and debris before they enter the system, this assembly prevents internal scouring and premature wear, ensuring your equipment maintains peak performance and longevity during off-road use.

• High-efficiency filtration media helps prevent dust and grit ingress
• Durable housing construction engineered for high-vibration off-road environments
• Optimized for maximum airflow to prevent system restriction
• Essential maintenance item for preserving the service life of internal components

This genuine ARB wiring loom is a dedicated harness designed to connect the dashboard rocker switch to the main control loom of an ARB CKMTA series compressor. Engineered for a direct fit, it provides a reliable electrical path for activating high-output air systems in demanding off-road environments.

• Compatible with ARB CKMTA12 and CKMTA24 Twin On-Board Air Compressors
• Pre-terminated connectors for a simple plug-and-play installation
• High-quality insulated wiring designed to resist heat and vibration
• Color-coded leads for easy identification during installation or troubleshooting
• Essential for replacing damaged harnesses or completing custom compressor mounting setups

This heavy-duty wiring loom provides a dedicated, high-current power supply for ARB CKMTA12 and CKMTA24 Twin Air Compressors. Engineered to handle the significant amperage draw of twin-motor systems, this harness ensures consistent voltage delivery to maintain peak performance during rapid tire inflation or air tool operation.

• Compatible with ARB CKMTA12 (12V) and CKMTA24 (24V) Twin Air Compressors
• Heavy-gauge wiring designed to manage high current loads without voltage drop
• Equipped with integrated relays and weatherproof fuse holders for circuit protection
• Heat-resistant protective conduit guards against abrasion and engine bay temperatures
• Pre-terminated connectors for a secure, plug-and-play installation into the ARB compressor system

This genuine ARB Wiring Loom is engineered specifically for use with CKMA12 (12V) and CKMA24 (24V) High Output On-Board Air Compressors. Designed to handle the high current draw of these pneumatic systems, this harness is an essential component for replacing a damaged original loom or completing a clean, professional installation in a new vehicle location.

• Direct replacement wiring harness for ARB CKMA12 and CKMA24 High Output compressors
• Includes high-quality integrated relay for dependable compressor cycling
• Equipped with an inline fuse holder to protect the electrical circuit from overcurrent
• Features pre-terminated connectors for the compressor and dashboard-mounted switch
• Constructed with automotive-grade insulation for durability in harsh engine bay environments

Fits select 1994-2022 Dodge and Ram 1500, 2500, and 3500 trucks equipped with the Corporate 9.25 12-bolt rear axle (5.9L).

Upgrade your drivetrain protection with the aFe Power Pro Series differential cover. Engineered to improve thermal management and fluid longevity, this cover features an increased 4-quart lubricant capacity and external cooling fins that dissipate heat more efficiently than the stamped steel factory unit. The construction utilizes durable die-cast A356 aluminum with reinforced ribs for maximum structural integrity under heavy loads or off-road stress.

Maintenance is simplified via a built-in oil level sight glass and a magnetic deep-reach fill plug and drain plug, which work together to capture metallic debris and prevent internal gear wear. The wrinkle black powder-coated finish with machined fins provides a high-end look while resisting corrosion in harsh underbody environments.

• Manufacturer Part Number: 46-70272
• Increased 4-quart fluid capacity
• Die-cast A356 reinforced aluminum construction
• External fins for maximum heat dissipation
• Integrated oil level sight glass with calibration plug
• Magnetic drain and fill plugs capture abrasive ferrous particles
• Wrinkle black powder-coat with machined accents
• 50-state legal
• 2-year limited warranty

Fits 2018-2024 Jeep Wrangler JL models with the Dana 35 rear differential.

The Yukon Gear Hardcore Differential Cover (MPN: YHCC-D35JL) is engineered to provide superior protection for your lockers, gears, and axles against trail impacts that can compromise factory stamped-steel covers. Cast from high-strength, thick-walled nodular iron, this cover increases the structural rigidity of the differential housing. This added stiffness reduces housing deflection under high-torque loads, protecting vital internal components from premature wear and failure. The interior is specifically contoured to promote rapid oil circulation, ensuring the gear set stays cooler during extended use.

• Thick-walled nodular iron construction for maximum impact resistance
• Contoured internal surfaces improve oil flow for enhanced cooling
• Durable black powder coat finish resists corrosion and trail debris
• Includes high-strength fasteners and a contrasting stainless-steel accent plate
• Compatible with both standard and reverse rotation differentials
• Precision-engineered for a direct bolt-on installation

Fits Subaru Impreza WRX STI models equipped with the R180 rear differential.

The Cusco Increased Capacity Rear Differential Cover is an essential upgrade for Subaru owners who demand more from their drivetrain during track sessions or aggressive driving. By increasing the total oil volume within the R180 housing, this cover helps stabilize gear oil temperatures and prevents the fluid breakdown that can lead to premature wear of the ring and pinion or LSD units.

• Increased gear oil capacity for improved thermal management
• Integrated cooling fins to maximize heat dissipation
• Precision-machined high-strength aluminum construction
• Signature Cusco Blue anodized finish for corrosion resistance
• Designed specifically for the R180 rear differential housing
• Manufacturer Part Number: 692 008 AL

Fits 1993-1995 Mazda RX-7 (Base, R1, R2, and Touring) models.

The GReddy high-capacity differential cover is a critical upgrade for the FD3S chassis, specifically designed to address the high thermal loads encountered during track use or high-horsepower street driving. By increasing the total gear oil capacity, this cover provides a larger thermal reservoir, helping to stabilize fluid temperatures and protect your differential gears and limited-slip internals from premature wear. The cast aluminum construction and integrated cooling fins significantly improve heat dissipation compared to the factory stamped steel unit.

• Manufacturer Part Number: 14540401
• High-quality cast aluminum construction for superior strength and heat transfer
• Increased oil volume over the factory differential housing
• Integrated external cooling fins to maximize surface area and airflow
• Includes a pre-tapped port for easy installation of a differential temperature sensor
• Direct bolt-on replacement for the OE rear differential cover

Fits select 2017-2021 Ford F-250 and F-350 Super Duty SRW models (King Ranch, Lariat, Limited, Platinum, XL, XLT) equipped with the Dana M275 rear axle.

Protect your drivetrain with the Banks Ram-Air differential cover (MPN: 19280). Unlike conventional flat-back aftermarket covers that can cause fluid aeration and stagnant air pockets, the patented Banks design utilizes high-velocity Ram-Air scoops to force air through specialized radiation fins. In on-road towing tests, this system cooled 5X better than high-capacity flat-back covers, significantly extending the lubrication life of your gear oil.

The internal geometry is precision-engineered to improve fluid dynamics. A dedicated ring gear raceway guides fluid directly to the ring and pinion interface and out to the axle tubes and bearings, ensuring critical components stay lubricated under heavy loads. The design retains factory ground clearance and fluid capacity while providing superior heat rejection.

• Patented Cooling: Forced-air scoops and FlowThru Fins® overcome the dead air zone behind the differential.
• Fluid Management: Reduces aeration and improves lubrication flow to bearings.
• Premium Features: Includes a high-visibility sight glass, magnetic drain plug, and a 1/8-inch NPT temp sensor port.
• Rugged Construction: Durable black finish with an O-ring seal to eliminate the need for messy RTV.
• Safety Engineered: Ram-Air scoops are designed to break away if they strike an obstacle, preventing housing damage.

Fits select 2001-2019 Chevrolet Silverado, GMC Sierra, and Dodge Ram 1500, 2500, and 3500 trucks. The Banks Ram-Air Differential Cover (Black Ops edition) is engineered to solve the inherent cooling failures of traditional flat-back aftermarket covers. Utilizing a patented design, it cools 5X better than high-capacity flat-back covers by forcing high-velocity air through heat radiation fins, overcoming the "dead air zone" typically found behind the differential.

• Patented Ram-Air Cooling: Integrated scoops direct airflow into FlowThru Fins® to dissipate heat 118% more effectively than leading competitors.
• Fluid Dynamics: Internal raceways guide oil directly to the ring and pinion interface and axle bearings while reducing fluid aeration.
• Maintenance-Ready: Features an integrated sight glass for quick level checks, an angled fill port, and a magnetic drain plug to capture metallic debris.
• Robust Construction: Includes an O-ring seal to eliminate messy RTV and breakaway scoops to maintain ground clearance safety in the event of an impact.

• Manufacturer Part Number: 19269
• Fitment: 11.5/11.8-inch 14-Bolt Differentials
• Finish: Black Ops (Powder Coated)
• Warranty: Limited Lifetime

Fits select 2001-2019 Chevrolet Silverado, GMC Sierra, and Dodge Ram 1500/2500/3500 trucks with 11.5 or 11.8 14-bolt rear differentials.

The Banks Ram-Air differential cover is engineered to solve the cooling deficiencies of traditional "flat-back" aftermarket covers. While high-capacity covers often stall airflow, creating a dead air zone behind the housing, the patented Banks design utilizes integrated Ram-Air scoops to force high-velocity air through heat radiation fins. In on-road towing tests, this system cools 5X better than standard flat-back covers, significantly extending the life of your gear lubrication.

Beyond external cooling, the interior features a ring gear raceway that guides fluid specifically to the ring and pinion interface and out to the axle bearings, reducing aeration. Maintenance is simplified with a built-in sight glass for quick oil level checks and a magnetic drain plug to capture metal wear particles. The included O-ring seal ensures a leak-free installation without the need for messy RTV silicone.

• Patented Cooling: Ram-Air scoops and FlowThru Fins provide 5X better cooling than flat-back designs.
• Superior Fluid Dynamics: Internal raceway reduces fluid aeration and improves lubrication to critical bearings.
• Durability: Rugged natural finish aluminum construction with breakaway scoops to maintain ground clearance if impacted.
• Easy Maintenance: Features a sight glass, angled fill port, and magnetic drain plug.
• Manufacturer Part Number: 19259

Includes: Differential cover, O-ring seal, magnetic drain plug, and mounting hardware. Retains stock fluid quantity and factory ground clearance.

Fits select 1962-2024 Ford vehicles including F-250/F-350 Super Duty, Excursion, Bronco, and F-150 models with the 10.25-inch 12-bolt rear axle.

The Banks Black-Ops Ram-Air differential cover is engineered to extend lubrication life by significantly reducing fluid temperatures. Unlike flat-back aftermarket covers that can actually impede cooling and fluid flow, this patented design utilizes Ram-Air scoops to force air through external heat radiation fins. In on-road towing tests, this system cools 5X better than high-capacity flat-back covers and demonstrated 118% better cooling performance than competitors in sustained 60mph tests.

Beyond thermal management, the internal geometry features a ring gear raceway that guides fluid directly to the ring and pinion interface and out to the axle tubes and bearings. This reduces fluid aeration and ensures critical components stay lubricated under load. Installation is simplified with a reusable O-ring seal, eliminating the need for messy RTV silicone while maintaining factory ground clearance.

• Patented Forced-Air Cooling: Ram-Air scoops overcome the dead air zone behind the differential to cool internal components.
• FlowThru Fins: Direct heat transfer from the fluid to the high-velocity exterior airflow.
• Enhanced Fluid Dynamics: Internal raceway reduces aeration and directs oil to the ring, pinion, and bearings.
• Simplified Maintenance: Includes a built-in sight glass for level checks and a magnetic drain plug to capture metallic debris.
• Premium Construction: Features an angled fill port, NPT temp sensor port, and a breakaway scoop design for off-road safety.
• Manufacturer Part Number: 19258
• Axle Fitment: Ford 10.25" 12-Bolt

Fits select 1985-2024 Ford F-250, F-350 Super Duty, Excursion, and other Ford models equipped with a 10.25-inch 12-bolt rear differential.

The Banks Power Ram-Air Differential Cover (MPN 19252) is engineered to solve the overheating issues common with high-capacity, flat-back aftermarket covers. Unlike standard covers that can trap heat in a dead air zone behind the differential, this patented design uses external Ram-Air scoops to force high-velocity air through radiation fins. In on-road towing tests, this system cooled 5X better than conventional flat-back covers, significantly extending the life of your gear lubrication.

• Patented Forced-Air Cooling: Ram-Air scoops and internal FlowThru Fins transfer heat away from the fluid to the exterior air.
• Superior Fluid Dynamics: An internal ring gear raceway guides fluid to the pinion interface and axle tubes while reducing aeration.
• Simplified Maintenance: Features a built-in sight glass for fast level checks, an angled fill port, and a magnetic drain plug to capture ferrous wear particles.
• Precision Engineering: Includes a high-quality O-ring seal to eliminate the need for messy RTV silicone and an integrated 1/8-inch NPT temp sensor port.
• Ground Clearance: Maintains stock ground clearance with break-away scoops designed to shear off safely if they strike an obstacle.

• Manufacturer Part Number: 19252
• Differential Fitment: Ford 10.25 inch (12-Bolt)
• Finish: Black Milled
• Installation: Bolts to factory mounting points with included hardware

Fits select 2001-2019 Chevrolet Silverado, GMC Sierra, and Dodge/RAM 1500, 2500, and 3500 trucks with 11.5" or 11.8" 14-bolt rear differentials.

The Banks Ram-Air differential cover is engineered to solve the cooling deficiencies of conventional flat-back aftermarket covers. While high-capacity covers often increase fluid volume, they frequently fail to manage airflow, creating a "dead air zone" behind the housing. This patented design features functional Ram-Air scoops that force high-velocity air through external heat radiation fins, resulting in cooling performance up to 5X better than flat-back designs during on-road towing tests.

Beyond external cooling, the internal geometry is precision-modeled to optimize fluid dynamics. A specialized ring gear raceway guides lubricant directly to the ring and pinion interface and out to the axle tube bearings while reducing fluid aeration. The kit simplifies maintenance with a built-in sight glass for quick level checks and a magnetic drain plug to capture metallic wear particles. Installation is streamlined with a reusable O-ring seal, eliminating the need for messy RTV silicone.

• Manufacturer Part Number: 19249
• Fits 11.5" and 11.8" 14-bolt differential housings
• Patented Ram-Air scoops with breakaway safety design
• FlowThru internal fins for maximum heat transfer
• 304 Stainless steel hardware and 1/8" NPT temp sensor port
• Magnetic drain plug and sight glass for easy service
• Maintains factory ground clearance and fluid capacity
• Limited Lifetime Warranty

Fits select 1984-2006 Jeep Cherokee, Comanche, Grand Cherokee, Grand Wagoneer, and Wrangler models equipped with the AMC Model 35 rear axle.

The Yukon Hardcore Differential Cover is engineered to protect your lockers, gears, and axle shafts from severe impacts during technical off-road driving. Cast from thick-walled nodular iron, this cover significantly increases the structural rigidity of the differential housing. This added stiffness reduces housing deflection under high-torque loads, ensuring more consistent gear mesh and protecting vital internal components.

Designed for both form and function, the cover features contoured internal surfaces that facilitate rapid oil circulation for improved cooling. The assembly includes high-strength steel fasteners and a durable black powder coat finish for maximum corrosion resistance and longevity on the trail.

• High-strength nodular iron construction provides superior impact protection
• Reinforces housing rigidity to reduce deflection under high torque
• Contoured inner surfaces promote faster oil circulation and cooling
• Compatible with both standard and reverse rotation differentials
• Durable black powder coat finish with a contrasting stainless-steel accent plate
• Complete with high-strength steel installation hardware
• Manufacturer Part Number: YHCC-M35

Fits select 2018-2023 Jeep Wrangler (JL) and Gladiator (JT) models (2.0L) equipped with the Dana M210 front axle.

The aFe Power Pro Series front differential cover brings performance engineering to your axle's protection. Constructed from durable cast aluminum with reinforced ribs, this cover provides maximum strength and structural integrity. The design features internal and external cooling fins that efficiently transfer heat from the gear oil to the ambient air, maintaining lower operating temperatures during extended use. This cover also features an increased oil capacity over the factory unit for improved lubrication and cooling performance.

For maintenance and protection, the system includes dual neodymium magnetic plugs—a drain plug and a deep-reach fill plug—to capture fine metal particles before they can damage your gears. A pre-installed large oil level sight glass allows for instant fluid inspection, while the calibration plug is set to the factory oil level to prevent overfilling. The cover is finished in a durable wrinkle-black powder coating with machined fins for a rugged, high-performance look.

• Manufacturer Part Number: 46-71030B
• Fits Dana M210 front axles
• High-strength cast aluminum construction with reinforced ribs
• Wrinkle-black powder-coated finish with machined fins
• Increased oil capacity for better thermal management
• Large oil level sight glass for easy inspection
• Dual neodymium magnetic plugs capture internal debris
• Calibration plug prevents overfilling
• Includes all necessary installation hardware

Fits select 1979-2014 Chevrolet and GMC C20, K20, Silverado/Sierra 1500 and 2500, Suburban, and Express/Savana vans with the GM 9.5-inch differential.

This Yukon Gear YP C5-GM9.5 steel differential cover serves as a reliable replacement for your factory unit. Designed specifically for the GM 9.5" 14-bolt semi-floating axle, this stamped steel cover provides structural protection for your differential components. The housing is threaded for a fill plug to facilitate gear oil service, though the plug itself is not included with the cover.

• Material: Stamped Steel
• Differential Application: GM 9.5-inch 14-Bolt
• Feature: Threaded for fill plug
• Note: Fill plug not included
• Manufacturer Part Number: YP C5-GM9.5