Vibrant Performance Female AN Flare to Male NPT Adapters are lightweight and constructed from 6061 Aluminum Alloy. Our Female AN Flare to Male NPT Adapters deliver quality, reliability, smooth flow, ease of assembly and the comfort of an anti-leak seal and are designed to fit most popular oil pumps, fuel pumps, fuel filters and a wide range of other common components. All Vibrant Performance Adapter Fittings are available in anodized black only.

This pre-assembled 36-inch PTFE hose from Vibrant Performance provides a professional, high-pressure solution for plumbing fuel, oil, or cooling systems. The PTFE (Polytetrafluoroethylene) inner liner is engineered for maximum chemical resistance, making it compatible with nearly all automotive fluids including E85, methanol, and aggressive additives that can degrade standard rubber lines. Unlike traditional synthetic rubber, PTFE is non-permeable, which eliminates the fuel-vapor smell often found in performance fuel systems.

• Hose Length: 36 inches
• Liner Material: PTFE (Polytetrafluoroethylene) for chemical and thermal stability
• Fitting Size: -8AN Female Swivel
• Fitting Configuration: One Straight end and one 90 Degree end
• Compatibility: Suitable for fuel (E85/Gasoline/Diesel), oil, coolant, and methanol

Each assembly is factory-built to ensure a secure, leak-free connection. The -8AN female fittings feature a swivel design for easy orientation during installation, and the 90-degree end allows for clean routing in tight engine compartments or around chassis components.

Vibrant Performance 45-degree silicone elbows are designed for high-performance plumbing in congested engine bays where space is at a premium. These connectors feature a tight-radius bend and are constructed with high-temperature resistant aramid reinforcement fabric between four layers of silicone, ensuring the hose withstands heavy-duty pressure and extreme thermal cycling without swelling or bursting.

• Inner Diameter: 1.000 in.
• Leg Lengths: 8.000 in.
• Construction: 4-ply aramid reinforced silicone
• Operating Temperature: -75°F to 392°F (-60°C to 200°C)
• Standards: Meets or exceeds SAE J20 specifications
• Resistances: UV and Ozone resistant
• Compatibility: Suitable for water, coolant, and air service only (not for fuel or oil)

Vibrant Performance reinforced silicone heater hoses are engineered for high-temperature cooling system plumbing where standard rubber hoses fail. This 1/4-inch (6mm) I.D. hose features polyester reinforcement for superior pressure resistance while maintaining the flexibility needed for tight engine bay routing.

• I.D.: 1/4" (6mm)
• Length: 20 ft.
• Material: Polyester reinforced silicone
• Finish: Black
• Temperature Range: -58°F to 392°F (-50°C to 200°C)
• Certification: Exceeds SAE J20R3 requirements
• Compatibility: Designed for water and coolant service; not suitable for fuel or oil applications

Vibrant Performance plastic flare plugs are essential components for maintaining system cleanliness during assembly, storage, or transport. These plugs provide a temporary seal to prevent dust, debris, and moisture from contaminating open fuel, oil, or coolant lines and hoses.

• Size: AN -6
• Configuration: Male Flare Plug
• Compatibility: Fits any 37-degree AN flare and straight-cut AN ports
• Material: Durable plastic construction
• Application: Designed for protecting open plumbing lines and ports during maintenance or storage

Ensure a consistent, leak-free seal on your induction system with the Vibrant Performance HD PowerFilter Replacement O-Ring. Specifically engineered for the HD PowerFilter assembly, this replacement gasket restores the critical seal between the filter element and housing, preventing unfiltered air from entering your engine.

Over time, heat cycles and repeated service intervals can cause original seals to flatten, crack, or lose elasticity. Replacing a worn O-ring during routine maintenance is essential to maintaining the integrity of your intake or forced induction system. This component is manufactured to precise tolerances for a perfect fit and reliable compression.

• Direct replacement for Vibrant Performance HD PowerFilter assemblies
• Restores airtight sealing for optimal filtration and intake performance
• Precision-sized Inner Diameter (ID): 50.47mm
• Constructed from high-grade elastomer to resist heat and engine bay fluids

This Vibrant Performance one-way check valve is engineered to prevent backflow and maintain pressure in low-pressure pneumatic and fluid systems. It is a critical component for custom vacuum routing, boost control lines, and fuel vapor systems where directional flow is required to protect sensitive components and ensure consistent engine performance.

• 5/16in (8mm) barbed inlet and outlet ends for secure hose retention
• Precision one-way flow design to eliminate reverse pressure
• Compact profile allows for installation in tight engine bay configurations
• Ideal for vacuum, air, and non-corrosive fluid applications

Vibrant Performance Pre-Assembled PTFE Hose Assemblies provide a professional-grade plumbing solution for high-performance automotive fluid systems. Each line is constructed with a chemically resistant PTFE liner, making it compatible with a wide range of fluids including fuel, oil, nitrous, and coolant. Unlike field-assembled lines, these feature crimp-on fittings installed using a hydraulic tool for a permanent, leak-free connection.

To ensure maximum reliability, every assembly is factory pressure tested to its full rated working pressure. The ends are fitted with black anodized aluminum hose ends for superior corrosion resistance and a clean finish. These assemblies are designed for low-to-medium pressure applications; do not use them in high-pressure hydraulic systems.

• Length: 12 inches
• Fitting Size: -6AN Female
• Fitting Angles: Straight to 45 Degree
• Material: PTFE-lined hose with black anodized aluminum fittings
• Construction: Hydraulically crimped for a permanent seal
• Validation: Factory pressure tested

The Vibrant Performance Swivel Adapter provides a high-pressure, leak-free connection when transitioning between different O-ring Boss (ORB) port sizes. This fitting features a male -8 ORB end and a -6 ORB end, making it essential for custom plumbing in high-performance fuel, oil, or cooling systems. The integrated swivel design allows for 360-degree orientation, ensuring you can route lines in tight engine compartments without risking hose fatigue or thread binding during installation.

• Port A: Male -8 ORB (O-Ring Boss)
• Port B: -6 ORB (O-Ring Boss)
• Integrated swivel design for precise hose alignment in cramped spaces
• Precision-machined threads for consistent engagement and a secure seal
• Suitable for high-pressure fuel, oil, and coolant applications

This Vibrant Performance swivel adapter simplifies complex plumbing by allowing for precise orientation of fluid lines in tight engine bays. Designed to thread directly into -8 AN O-Ring Boss (ORB) ports, the swivel mechanism provides the flexibility needed to clock your fittings for optimal routing without compromising seal integrity.

• Fitting Type: Swivel Adapter
• Port A: Male -8 AN ORB
• Port B: Male -8 AN ORB
• Material: 6061-T6 Aluminum
• Finish: Black Anodized for corrosion resistance
• Suitable for fuel, oil, and coolant systems

Vibrant Performance swivel adapters solve complex plumbing challenges in high-performance fuel, oil, and coolant systems. This male -6 ORB to male -6 ORB fitting provides a 360-degree swivel connection, allowing for precise alignment of lines and components in tight engine compartments where rigid fittings often struggle with port orientation.

• Fitting Type: Swivel Adapter
• Thread A: Male -6 ORB (O-Ring Boss)
• Thread B: Male -6 ORB (O-Ring Boss)
• Material: Lightweight 6061 aluminum
• Finish: Black anodized for superior corrosion and wear resistance
• Function: Allows for 360-degree rotation to simplify plumbing in cramped spaces
• Compatibility: Suitable for fuel, oil, and coolant applications

This Vibrant Performance swivel adapter facilitates a reliable, leak-free transition between -10 ORB and -8 ORB ports. Engineered for high-performance fluid delivery systems, the integrated swivel mechanism allows for precise clocking and easier installation in confined engine bays or chassis locations where fixed fittings may cause alignment issues.

• Fitting Style: Swivel Adapter
• Side A: Male -10 ORB (O-Ring Boss)
• Side B: Male -8 ORB (O-Ring Boss)
• Construction: Designed for maximum durability and compatibility with most automotive fluids
• Sealing Type: O-ring interface ensures a secure seal even under high-pressure conditions

Vibrant Performance Polyester Reinforced Silicone Heater Hoses provide a durable and flexible plumbing solution for high-temperature cooling systems. This 5/16" (8mm) ID hose is engineered for extreme reliability, featuring a multi-ply polyester reinforcement that allows it to maintain flexibility and structural integrity under pressure. Unlike standard rubber hoses that dry rot and crack over time, this silicone construction is built to withstand harsh engine bay conditions.

• Inside Diameter: 5/16" (8mm)
• Length: 20 ft. roll
• Material: High-grade silicone with polyester reinforcement
• Operating Temperature: -58°F to 392°F (-50°C to 200°C)
• Compliance: Exceeds SAE J20R3 requirements
• Finish: Black
• Note: Suitable for coolant and water service; not for use with fuel or oil.

This Vibrant Performance swivel adapter provides a secure, leak-proof connection between -12 ORB and -10 ORB ports. Designed for high-performance fluid delivery, the O-ring boss (ORB) interface ensures a positive seal for fuel, oil, and coolant systems without the need for messy thread sealants or Teflon tape.

The integrated swivel design is essential for plumbing in confined engine bays, allowing you to precisely clock the fitting for optimal hose routing before final tightening. This functionality reduces stress on lines and ensures a professional, clean installation.

• Fitting Type: Swivel Adapter
• Connection A: -12 Male ORB (O-Ring Boss)
• Connection B: -10 Male ORB (O-Ring Boss)
• Construction: High-strength aluminum for fluid compatibility
• Applications: Suitable for fuel, oil, and cooling system plumbing

The Vibrant T6 Turbo Compressor Outlet Flange to 4-inch HD Weld Ferrule provides a secure, leak-proof connection for high-boost induction systems. Designed specifically for T6-frame turbochargers, this component converts the compressor discharge to a modular 4-inch HD clamp interface, eliminating the reliance on traditional silicone couplers and worm-gear clamps that can fail under extreme pressure.

• Precision Fitment: Engineered to mate directly with T6 turbocharger compressor outlets.
• HD Series Compatibility: Features an integrated 4-inch HD weld ferrule designed for use with Vibrant Performance HD Clamps.
• Reliable Performance: Ideal for high-pressure forced induction applications where coupler blow-off or boost leaks are a concern.
• Fabrication Ready: Provides a professional, rigid transition for custom intercooler piping and charge air systems.

This Vibrant Performance one-way check valve is engineered to provide reliable flow control in automotive plumbing systems. Featuring 5/8-inch barbed ends, it ensures fluid or air moves in a single direction while effectively preventing backflow. It is a critical component for maintaining system pressure and protecting sensitive hardware in vacuum, ventilation, or fluid management setups.

• Inlet/Outlet Size: 5/8" (15.8mm) barbed ends
• Function: Reliable one-way flow/backflow prevention
• Installation: Barbed design for secure hose fitment and easy integration
• Application: Ideal for vacuum lines, PCV systems, and fluid ventilation

This Vibrant Performance swivel adapter provides a reliable, leak-free connection between two female ORB ports. Designed for high-performance fluid systems, the swivel functionality allows for easier installation and precise alignment in tight engine bays or chassis locations where fixed fittings may cause plumbing or routing issues.

• Fitting Type: Swivel Adapter
• Thread Size A: -12 AN Male ORB (O-Ring Boss)
• Thread Size B: -12 AN Male ORB (O-Ring Boss)
• Seal Type: O-Ring Seal

By utilizing O-ring boss (ORB) threads, this adapter ensures a positive seal without the need for thread sealant, reducing the risk of system contamination in fuel, oil, or cooling applications.

Ensure precise fluid or air direction with the Vibrant Performance 3/8in Barbed Check Valve. Designed to prevent backflow in vacuum, air, or low-pressure fluid systems, this one-way valve is a critical component for maintaining system integrity and protecting sensitive hardware from reverse pressure or fluid migration.

• Inlet/Outlet Size: 3/8in Barbed
• Function: Reliable one-way flow control to prevent backflow
• Installation: Secure barbed ends for direct fitment into rubber or silicone hoses
• Compatibility: Suitable for vacuum lines, PCV systems, and non-corrosive fluid management

Maintain precise flow control and prevent damaging backflow with the Vibrant Performance 1/2" Barbed One-Way Check Valve. This component is essential for automotive plumbing systems where maintaining directional flow is critical for performance and component longevity. By allowing flow in only one direction, it protects sensitive sensors and maintains vacuum or pressure levels in dedicated lines.

• Prevents backflow in vacuum, air, and fluid systems
• 1/2" barbed ends provide a secure interface for standard 1/2" ID hoses
• Compact, inline design allows for easy installation in tight engine bays
• Engineered for reliable operation in high-performance environments
• Ideal for PCV systems, brake booster lines, and custom plumbing applications

The Vibrant Performance LS DBC 102mm Throttle Body to 4-inch HD Adapter provides a rigid, leak-proof connection for high-boost LS engine applications. This precision-machined component allows for the direct transition from a 102mm Drive-By-Cable (DBC) throttle body to a 4-inch Vibrant HD Clamp system, eliminating the reliability issues associated with traditional silicone couplers under extreme pressure.

• Designed specifically for 102mm LS Drive-By-Cable (DBC) throttle bodies
• Adapts throttle body inlet to a 4-inch Vibrant HD Clamp assembly
• Maintains a secure, high-pressure seal in forced induction setups
• Engineered for precision fitment and maximum flow transition
• Ideal for race-tier plumbing where coupler failure is not an option

Vibrant Performance swivel-style banjo hose end fittings provide a reliable solution for plumbing in tight clearances where standard 90-degree or straight fittings are impractical. Constructed from lightweight 6061 aluminum alloy, these fittings feature a full-swivel design that allows for precise clocking and easier alignment during assembly. The smooth internal bore ensures high-flow performance while the anti-leak seal provides peace of mind in high-pressure fuel, oil, or coolant systems.

• Manufacturer Part Number: 24064
• Fitting Size: -6AN
• Material: 6061 Aluminum Alloy
• Finish: Anodized Black
• Fitting Style: Swivel Banjo
• Note: Banjo bolt is required for installation and sold separately

Each fitting is finished in a durable black anodized coating for superior corrosion resistance and a clean, professional look in any engine bay. These components are engineered for ease of assembly and long-term reliability in demanding automotive plumbing applications.

Vibrant Performance swivel-style Banjo Hose End Fittings provide a compact, low-profile solution for tight plumbing clearances in performance fuel, oil, and coolant systems. These lightweight fittings are manufactured entirely from 6061 aluminum alloy, offering high strength and reliable pressure handling for demanding automotive environments.

The integrated swivel-style head allows for 360-degree orientation after assembly, simplifying the routing of -10AN braided lines in cramped engine bays. Engineered for smooth fluid transition and maximum flow capacity, these fittings ensure a secure, anti-leak seal when paired with the appropriate crush washers and banjo bolts. The black anodized finish provides essential corrosion resistance and a clean, professional look for your plumbing project.

• Manufacturer Part Number: 24105
• Hose End Size: -10AN
• Compatibility: Designed for use with M16 or 5/8 inch Banjo Bolts
• Material: 6061 Aluminum Alloy
• Construction: Swivel-style for easy alignment
• Finish: Anodized Black

Please note: Banjo bolt is sold separately.

Vibrant Performance Silicone Vacuum Hose Pit Packs provide a professional-grade solution for replacing worn, brittle, or leaking factory rubber vacuum lines. These hoses are engineered specifically for high-performance applications to prevent the common issues of collapsing under high vacuum or swelling under pressure. Constructed from high-stability silicone, they are resistant to peeling, cracking, and ozone degradation, ensuring long-term reliability in the high-heat environment of an engine bay.

This kit is ideal for plumbing critical components such as boost controllers, wastegates, blow-off valves, and intake manifolds. Every hose in this pack meets SAE J20R3 specifications, providing a secure fit and durable performance for street or track use.

• Meets SAE J20R3 specifications for automotive hose quality
• Designed to resist collapsing under high vacuum and heat
• Durable silicone construction prevents peeling, cracking, and swelling
• Black finish for a clean, professional appearance
• Manufacturer Part Number: 2104

Kit Includes:

• 5 ft of 1/8 in ID hose
• 10 ft of 5/32 in ID hose
• 4 ft of 3/16 in ID hose
• 4 ft of 1/4 in ID hose
• 2 ft of 3/8 in ID hose

Vibrant Performance 304 stainless steel mandrel-bent u-bends provide the dimensional accuracy and material consistency required for high-performance exhaust systems, headers, and custom intake plumbing. This 180-degree tight radius bend is engineered to simplify complex routing in cramped engine bays or chassis locations where space is at a premium.

Constructed from 16-gauge (0.065 inch) 304 stainless steel, this tubing offers excellent corrosion resistance and high-temperature durability. The mandrel bending process ensures a uniform diameter throughout the bend, maintaining optimal exhaust flow and structural integrity. Each piece arrives ready for fabrication, requiring minimal preparation for high-quality TIG or MIG welding.

• Manufacturer Part Number: 2684
• Material: 304 Stainless Steel
• Outside Diameter (O.D.): 2.5" (63.5mm)
• Wall Thickness: 16-Gauge (0.065")
• Bend Angle: 180 Degrees
• Bend Radius: Tight Radius
• Finish: Mill Finish, Mandrel Bent

Vibrant Performance high flow hose end fittings are engineered for maximum flow and reliability in demanding fluid transfer systems. Designed specifically for use with PTFE-lined flex hoses, these non-swivel fittings provide a secure, leak-proof connection required by professional builders and racers. This 150-degree fitting features a full-flow internal design to minimize turbulence and pressure drop.

• Precision CNC machined from 6061 aluminum alloy
• Black hard anodized finish for superior corrosion and wear resistance
• Includes a specialized aluminum olive that compresses directly to the PTFE liner
• Compatible with race fuel, nitrous, oil, power steering, and coolant systems
• Size: -12AN
• Angle: 150 Degree
• Manufacturer Part Number: 28512

Note: Not for use in brake or high-pressure hydraulic line applications.

Vibrant Performance silicone vacuum hoses provide reliable signal routing for boost and vacuum lines in high-performance engine bays. Unlike standard rubber lines that become brittle over time, these hoses are engineered to resist peeling, cracking, and swelling. The high-strength silicone construction is specifically designed to avoid collapse under high vacuum operation, ensuring consistent performance for MAP sensors, wastegates, and blow-off valves.

• Internal Diameter: 3/8" (9.5mm)
• Length: 10 ft.
• Color: Black
• Material: High-temperature silicone
• Certification: Meets SAE J20R3 specifications
• Manufacturer Part Number: 2107

Vibrant Performance silicone vacuum hoses are engineered for reliability in high-performance engine bays. Designed to maintain structural integrity under high-vacuum operation, this tubing is built to resist collapsing, peeling, cracking, or swelling when exposed to the heat and pressure of demanding automotive environments.

This 10-foot Pit Pack provides a professional-grade solution for routing vacuum lines for turbocharger wastegates, blow-off valves, and boost controllers. The high-grade silicone material offers superior longevity and temperature resistance compared to standard rubber lines, ensuring consistent performance and a secure fit on 5/16-inch or 8mm fittings.

• Part Number: 2106
• Inside Diameter: 5/16" (8mm)
• Length: 10 ft.
• Material: High-grade silicone
• Standard: Meets SAE J20R3 specifications
• Color: Black

Vibrant Performance T304 stainless steel mandrel bends are engineered for fabricators who require dimensional accuracy and material consistency for custom exhaust systems, headers, and intake plumbing. This 45-degree bend features a 1.5-inch centerline radius, providing a compact profile without the flow restriction or wall thinning often found in standard crush-bent tubing.

Constructed from 16-gauge (0.065") wall thickness T304 stainless steel, this component offers excellent corrosion resistance and high-temperature durability. Each bend is supplied with 6-inch leg lengths, providing ample material for trimming and fitment. The clean surface finish requires minimal preparation before TIG or MIG welding, ensuring a professional result for high-performance fabrication projects.

• Material: T304 Stainless Steel
• Outside Diameter: 1.50"
• Wall Thickness: 16-Gauge (0.065")
• Bend Angle: 45 Degrees
• Centerline Radius: 1.50"
• Leg Lengths: 6" x 6"
• Part Number: 13092

Constructed from high-grade T304 stainless steel, the Vibrant Performance 13306 90-degree mandrel bend elbow is designed for professional vehicle fabricators who demand precision and aesthetics. Featuring a factory-brushed finish, these elbows require virtually no surface preparation before welding, saving significant time in the shop. The tight 2.0-inch centerline radius (1D) and abbreviated leg lengths allow for compact routing in tight engine bays or chassis tunnels while minimizing material waste.

This mandrel-bent elbow maintains a consistent 2.0-inch outside diameter throughout the bend, ensuring optimal flow characteristics for custom exhaust systems, intake piping, or intercooler plumbing. Its T304 construction provides excellent corrosion resistance and durability under high-heat conditions.

• Material: T304 Stainless Steel
• Finish: Brushed
• Outside Diameter: 2.0 in (50.8 mm)
• Bend Angle: 90 Degrees
• Centerline Radius (CLR): 2.0 in (1D)
• Mandrel bent for uniform wall thickness and flow
• Manufacturer Part Number: 13306

Constructed from high-grade 304 stainless steel, this Vibrant Performance female V-band flange provides a secure, leak-free connection for custom exhaust, intake, or intercooler piping. This individual flange is designed specifically to slip over 2.25-inch O.D. tubing, allowing for the fabrication of modular systems that can be easily disassembled for maintenance or component swaps without the need for gaskets.

• Manufacturer Part Number: 1489F
• Material: 304 Stainless Steel
• Tubing Compatibility: 2.25" O.D.
• Connection Type: Female V-Band
• Construction: Precision-machined for optimal sealing and alignment

This flange is engineered to resist corrosion and maintain its structural integrity under the high thermal stress common in forced induction and high-performance exhaust applications. When paired with a matching male flange and V-band clamp, it creates a reliable, professional-grade union for any custom fabrication project.