Fits 2004-2006 Scion xA (Right Front).

The R1 Concepts Stainless Steel Brake Hose is engineered to eliminate the spongy pedal feel associated with factory rubber lines. Unlike OEM hoses that expand under hydraulic pressure, this braided stainless steel hose maintains its integrity, ensuring maximum force is transferred directly to the caliper. This results in a firmer, more responsive brake pedal and significantly improved modulation during daily driving or spirited performance use.

Construction features a high-strength PTFE inner core for superior pressure resistance, wrapped in a stainless steel weave for structural durability. An abrasion-resistant clear PVC outer coating protects the assembly from road debris, dirt, and corrosion, ensuring a long service life. This hose is precision-engineered for a direct-fit installation to factory mounting points and is United States DOT approved for street-legal safety compliance.

• Braided Stainless Steel: Prevents hose expansion under high pressure for consistent response.
• PTFE Inner Core: Handles high hydraulic loads and resists chemical degradation.
• Clear PVC Coating: Provides an extra layer of protection against chaffing and environmental corrosion.
• DOT Approved: Meets rigorous safety standards for street use.
• Complete Hardware: Includes banjo bolt and copper washers where applicable for a secure seal.
• Direct Fit: Designed to replace the right front factory hose with no modifications required.
• Manufacturer Part Number: HSK-91000

Fits 1993-1995 Mazda RX-7 (Rear).

R1 Concepts Stainless Steel Brake Lines (HSK-80083) are engineered to eliminate the soft, spongy brake pedal feel caused by factory rubber hose expansion. By replacing the rear OE lines with a high-strength stainless steel braided weave, these hoses maintain consistent hydraulic pressure and provide a firmer, more responsive pedal. This improved hydraulic efficiency is critical for better brake modulation during spirited street performance or aggressive track use.

The PTFE inner core provides superior pressure resistance and thermal stability, while the clear, abrasion-resistant PVC outer coating protects the stainless steel braid from dirt, debris, and chaffing. Each brake line is precision-engineered to meet United States DOT safety standards for street use, ensuring a secure and reliable direct-fit installation.

• High-strength stainless steel braided exterior prevents line expansion under pressure
• PTFE inner core for superior hydraulic resistance and fluid compatibility
• Abrasion-resistant clear PVC coating protects against corrosion and chaffing
• United States DOT approved for street legal safety compliance
• Includes necessary banjo bolts and copper washers where applicable
• Direct-fit replacement for the rear factory brake hoses
• Manufacturer Part Number: HSK-80083

Fits 1989-2005 Mazda Miata.

The R1 Concepts HSK-80077 stainless steel brake hose replaces the factory rubber left rear line to eliminate the spongy pedal feel caused by hose expansion. By utilizing a high-strength PTFE inner core wrapped in a stainless steel braided weave, this hose maintains its shape under high hydraulic pressure, providing a firmer, more consistent brake response. This upgrade is essential for drivers looking for better brake modulation and improved hydraulic efficiency during spirited driving or daily commuting.

Built for durability in harsh environments, the hose features an abrasion-resistant clear PVC outer coating that protects the stainless mesh from dirt, debris, and corrosion. This DOT-approved hose is precision-engineered for a direct-fit installation, ensuring secure mounting to factory points for a straightforward replacement of worn OE components.

• High-strength stainless steel braided exterior prevents line expansion under pressure
• PTFE inner core for superior pressure resistance and thermal stability
• Clear PVC coating protects against chaffing and environmental corrosion
• United States DOT approved for street use and safety compliance
• Direct-fit design includes banjo bolt and copper washers for installation
• Manufacturer Part Number: HSK-80077

Fits 2016 Scion iM models.

Upgrade your vehicle's braking response with the R1 Concepts Left Front Stainless Steel Brake Hose. Designed to replace factory rubber lines that often expand and soften under high hydraulic pressure, this stainless steel braided hose provides a firmer, more consistent pedal feel. By minimizing line expansion, it ensures that braking force is transferred directly to the calipers, offering better modulation during aggressive driving, towing, or daily commutes.

Constructed for durability and safety, each hose features a PTFE inner core for superior chemical and thermal resistance, wrapped in a high-strength stainless steel weave. A clear, abrasion-resistant PVC outer coating is applied to protect the braid against chaffing, dirt, and road debris, preventing premature wear and corrosion. This hose is United States DOT approved, meeting strict safety standards for street use and performance reliability.

• Direct-fit installation for the left front position
• PTFE inner core resists expansion and maintains pressure consistency
• High-strength stainless steel braided exterior for maximum durability
• Clear PVC outer jacket protects against environmental damage and abrasion
• United States DOT approved for street and performance applications
• Includes banjo bolts and copper crush washers where applicable
• Precision-engineered fittings for secure, factory-style mounting
• Manufacturer Part Number: HSK-91002

Fits 2004-2013 Mazda 3 (Front).

R1 Concepts Stainless Steel Brake Lines replace factory rubber hoses to eliminate the volumetric expansion that causes a "spongy" pedal feel. Constructed with a PTFE (Teflon) inner core and a high-strength stainless steel braided exterior, these hoses maintain consistent internal pressure for improved hydraulic efficiency and more precise brake modulation. This design ensures that braking force is transferred directly to the calipers rather than being lost to hose wall flex.

To ensure long-term durability, each line features a clear, abrasion-resistant PVC outer coating that protects the stainless braid from debris, road salt, and chaffing against suspension components. These brake lines are United States DOT approved, meeting strict safety and quality standards for street use. The kit is designed as a direct-fit replacement, utilizing factory-style fittings for a secure installation without modification.

• Stainless steel braided weave prevents hose expansion under high pressure
• PTFE inner core provides superior resistance to heat and chemical degradation
• Clear PVC jacket protects against corrosion and abrasion
• Direct-fit installation with application-specific mounting brackets
• DOT approved for street-legal safety compliance
• Includes banjo bolts and copper crush washers where required
• Manufacturer Part Number: HSK-80032

Fits 2016-2022 Mazda MX-5 Miata models (Rear). This R1 Concepts stainless steel brake hose (HSK-80103) replaces the flexible factory rubber line to provide a firmer, more responsive pedal and consistent hydraulic pressure during spirited driving or daily use.

Unlike OEM rubber hoses that can swell and expand under heavy braking loads, these lines utilize a high-strength stainless steel braided exterior that maintains its diameter even under high PSI. The internal PTFE core offers superior chemical and heat resistance, ensuring smooth fluid transfer and improved brake modulation. To protect against the elements, each line is finished with an abrasion-resistant clear PVC coating that shields the stainless weave from dirt, debris, and corrosion.

• Direct-fit design for 2016-2022 Mazda MX-5 Miata rear applications
• PTFE inner core resists high pressure and fluid degradation
• Stainless steel braided reinforcement eliminates hose expansion and line flex
• Clear PVC outer coating provides abrasion and corrosion protection
• United States DOT approved for street-legal safety compliance
• Includes banjo bolts, copper washers, and mounting brackets (where applicable)
• Manufacturer Part Number: HSK-80103

Fits 2008-2011 Lexus LX570 (Upper Left Rear).

Replace soft factory rubber lines with the R1 Concepts Stainless Steel Braided Brake Hose to eliminate pedal sponginess and improve hydraulic efficiency. Specifically engineered for the Lexus LX570, this upper left rear hose prevents line expansion under high-pressure braking—an essential upgrade for heavy SUVs used for towing, off-roading, or daily transit where consistent stopping power is required. The braided reinforcement provides a firmer, more responsive pedal feel compared to OEM rubber hoses that can swell or degrade over time.

• PTFE Inner Core: Highly resistant to chemical breakdown and heat, maintaining consistent fluid flow and pressure.
• Stainless Steel Braid: High-tensile reinforcement prevents the hose from ballooning under load for a more precise brake modulation.
• PVC Protective Coating: Clear, abrasion-resistant outer layer prevents chaffing and protects the braid from salt, dirt, and road debris.
• DOT Compliant: Meets United States DOT safety and quality standards for street use.
• Precision Fittings: Direct-fit design engineered to match factory mounting points for secure installation.

This kit includes necessary hardware such as banjo bolts and copper crush washers where applicable to ensure a leak-free seal. Manufacturer Part Number: HSK-76242.

Fits 2004-2013 Mazda 3 (Rear).

Standard rubber brake hoses are susceptible to expansion under high hydraulic pressure, which often results in a soft or "spongy" brake pedal. R1 Concepts Stainless Steel Brake Lines are engineered to eliminate this flex by utilizing a PTFE inner core reinforced with a high-strength stainless steel braided exterior. This construction ensures that hydraulic pressure is delivered directly to the calipers for a firmer, more responsive pedal and improved brake modulation.

To ensure long-term reliability in harsh environments, each hose features a clear, abrasion-resistant PVC outer coating that protects the stainless steel weave from dirt, road debris, and corrosion. These lines are built to handle the demands of daily driving, towing, and spirited performance use while maintaining strict safety compliance.

• PTFE Inner Core: High-pressure resistance for consistent fluid delivery.
• Braided Stainless Steel: Eliminates hose expansion to improve pedal feel and response.
• Protective PVC Jacket: Clear coating prevents chafing and corrosion for a longer service life.
• DOT Approved: Certified to meet US DOT safety and quality standards for street use.
• Direct-Fit Design: Includes precision fittings and necessary hardware such as banjo bolts and copper washers where required.
• Manufacturer Part Number: HSK-80084

Fits 2005-2010 Scion tC.

R1 Concepts Stainless Steel Braided Rear Brake Lines are engineered to deliver precise braking performance and a firmer pedal feel. Unlike factory rubber hoses that expand under hydraulic pressure, these lines feature a high-strength stainless steel braided weave over a PTFE inner core. This construction virtually eliminates line expansion, providing consistent brake response and better modulation during aggressive driving or heavy braking.

For long-term durability, each hose is encased in a clear, abrasion-resistant PVC outer coating that protects the stainless steel braid from dirt, debris, and corrosion. These lines are DOT approved, meeting strict safety standards for street use, and are designed as direct-fit replacements for a straightforward installation.

• PTFE inner core provides superior pressure resistance and chemical stability
• High-strength stainless steel braided exterior prevents hose expansion and flex
• Clear abrasion-resistant PVC coating protects against chafing and road grime
• DOT approved for street use and safety compliance
• Direct-fit design mounts to factory locations
• Includes banjo bolts and copper washers where applicable for a complete install
• Manufacturer Part Number: HSK-91008

Fits 2010-2022 Lexus GX460 (Right Rear).

Replace the factory rubber brake line with this R1 Concepts Stainless Steel Brake Hose to eliminate the "spongy" pedal feel common during heavy braking. This hose (HSK-76211) is engineered to prevent expansion under high hydraulic pressure, ensuring a firm, consistent response whether you are daily driving, towing, or navigating off-road terrain. The construction features a PTFE inner core for superior pressure resistance, wrapped in a high-strength stainless steel braided weave for maximum durability.

• PTFE Inner Core: Provides a high-temperature, low-friction path for brake fluid and resists degradation.
• Stainless Steel Braid: Minimizes volumetric expansion to provide more direct hydraulic pressure to the caliper.
• Clear PVC Coating: Adds an abrasion-resistant layer to protect the stainless weave from dirt, debris, and corrosion.
• DOT Approved: Meets strict United States DOT safety and quality standards for street-legal use.
• Direct Fit: Precision-engineered fittings and included hardware ensure a secure, factory-style mounting.

Each kit includes the necessary banjo bolts and copper washers (where applicable) for a complete installation. Manufacturer Part Number: HSK-76211.

Fits 2001-2005 Mazda Miata (Right Front).

Replace your soft, factory rubber lines with the R1 Concepts stainless steel braided brake hose to eliminate the spongy pedal feel common in high-pressure or high-heat braking scenarios. While original equipment rubber hoses expand under pressure, this hose utilizes a PTFE inner core reinforced with a high-strength stainless steel weave to maintain consistent hydraulic pressure and a firm, responsive pedal feel. This modification is essential for drivers looking to improve brake modulation during spirited street driving or track use.

Built for long-term durability, the hose features a clear, abrasion-resistant PVC outer coating that protects the stainless braid from dirt, debris, and potential chafing against suspension components. Every line is precision-engineered with fittings designed for a direct-fit installation on the 01-05 Miata chassis, ensuring secure factory-style mounting without the need for custom fabrication.

• High-strength stainless steel braided exterior prevents line expansion
• PTFE inner core provides superior pressure resistance and chemical stability
• Abrasion-resistant clear PVC coating prevents corrosion and debris ingress
• United States DOT approved for street-legal safety and performance
• Includes necessary banjo bolts and copper washers where applicable
• Manufacturer Part Number: HSK-80023

Fits 2004-2011 Mazda RX-8.

R1 Concepts stainless steel brake lines are designed to replace flexible factory rubber hoses that expand under high-pressure braking. By utilizing a high-strength stainless steel braided weave over a PTFE inner core, these hoses virtually eliminate line expansion, providing a firmer, more communicative brake pedal and precise modulation during spirited driving or track use.

Each hose is finished with an abrasion-resistant clear PVC outer coating to protect the stainless steel braid from dirt, debris, and chaffing. These lines are precision-engineered for a direct-fit installation and are DOT approved for street use, ensuring they meet rigorous safety and quality standards.

• Position: Left Front
• Inner Core: PTFE for superior pressure resistance and chemical stability
• Exterior: Stainless steel braid reduces line flex and volumetric expansion
• Coating: Clear PVC protective layer for corrosion and abrasion resistance
• Compliance: United States DOT approved for street use
• Included Hardware: Banjo bolts and copper washers (where applicable)
• Direct replacement for factory rubber brake lines
• Manufacturer Part Number: HSK-80034

Fits 2002-2003 Lexus ES300 (Left Rear).

Replace a soft, worn factory rubber line with the R1 Concepts stainless steel braided brake hose to eliminate the "spongy" pedal feel caused by hose expansion. This left rear brake line is engineered to maintain consistent hydraulic pressure, providing a firmer, more responsive brake pedal whether you are commuting or driving under high-load conditions like towing.

Built for long-term durability, the hose features a PTFE inner core wrapped in a high-strength stainless steel braid that resists expansion under high psi. A clear, abrasion-resistant PVC outer coating protects the stainless weave from road debris, dirt, and corrosion. This direct-fit hose (HSK-76183) is US DOT approved, ensuring it meets strict safety standards for street use and includes the necessary hardware for a secure, factory-style installation.

• Position: Left Rear
• PTFE inner core for superior pressure resistance and chemical stability
• High-strength stainless steel braided exterior prevents line flex
• Clear PVC coating protects against abrasion and corrosion
• US DOT approved for safety and street compliance
• Includes banjo bolt and copper washers (where applicable)
• Direct-fit replacement for the factory rubber hose
• Manufacturer Part Number: HSK-76183

Fits 2004-2011 Mazda RX-8.

Standard rubber brake hoses are prone to expansion under high hydraulic pressure, resulting in a soft or spongy pedal feel. R1 Concepts Stainless Steel Brake Lines replace these factory components with a high-strength braided design that resists volumetric expansion, ensuring maximum pressure reaches the calipers for more precise modulation and a firmer, more consistent pedal feel.

Each hose is constructed with a chemically resistant PTFE inner core that maintains its integrity under high-heat braking conditions. This core is wrapped in a stainless steel braided weave for structural reinforcement and finished with a clear, abrasion-resistant PVC coating. This outer layer protects the braid from dirt, debris, and potential chafing against suspension components. These lines are United States DOT approved, ensuring they meet rigorous safety standards for street use.

• Prevents line expansion for improved hydraulic efficiency and brake response.
• PTFE inner core provides superior pressure resistance and thermal stability.
• Stainless steel braided exterior prevents hose flex under heavy braking.
• Clear PVC outer coating protects against corrosion and mechanical abrasion.
• DOT approved for street use and safety compliance.
• Includes banjo bolts and copper washers where applicable for a direct-fit installation.
• Manufacturer Part Number: HSK-80085

Fits 2008-2011 Lexus LX570 (Right Front).

Upgrade your LX570's hydraulic system with the R1 Concepts HSK-76106 stainless steel brake hose. Designed to replace the soft factory rubber line, this high-performance hose eliminates the spongy pedal feel caused by volumetric hose expansion under heavy braking loads. Whether you are towing, off-roading, or maintaining a daily driver, the braided stainless steel construction ensures consistent hydraulic pressure and a firmer, more predictable brake response.

This hose is built with a PTFE inner core for superior chemical and pressure resistance, wrapped in a high-tensile stainless steel weave. A clear PVC outer coating protects the braid from abrasion, debris, and corrosion, ensuring a long service life in harsh environments. As a DOT-approved component, it meets strict safety standards for street use and features precision-engineered fittings for a direct-fit installation.

• Direct Fit: Engineered specifically for the right front position of 2008-2011 Lexus LX570 models.
• PTFE Inner Core: Resists high temperatures and prevents line swell for consistent braking.
• Stainless Steel Braid: Reinforces the line to maintain hydraulic integrity under high-pressure scenarios.
• Protective Coating: Clear PVC layer prevents chaffing and shields the braid from road salt and grime.
• DOT Compliant: Fully approved for street use, meeting United States safety and quality standards.
• Installation Hardware: Includes necessary banjo bolts and copper washers where applicable for a secure seal.

Fits 2006-2015 Mazda MX-5 Miata.

Upgrade your Miata's braking performance with the R1 Concepts stainless steel braided brake hose for the left front position. While factory rubber hoses can expand under high hydraulic pressure—leading to a soft or spongy pedal—this performance line uses a PTFE inner core to maintain structural integrity. This ensures a firmer, more responsive pedal feel and consistent brake modulation during spirited street driving or track use.

Engineered for durability and safety, these lines feature a high-strength stainless steel weave and a clear, abrasion-resistant PVC outer coating that protects against road debris, dirt, and corrosion. As a direct-fit replacement (HSK-80036), it installs onto factory mounting points and includes the necessary hardware for a secure, leak-free connection.

• Stainless steel braided exterior eliminates hose expansion under pressure
• High-grade PTFE inner core for superior hydraulic efficiency and heat resistance
• Clear PVC outer jacket prevents abrasion and protects the stainless weave
• United States DOT approved for street safety and compliance
• Direct-fit design for simplified installation on the front left corner
• Includes banjo bolt and copper crush washers where required
• Manufacturer Part Number: HSK-80036

Fits 2010-2011 Lexus HS250h (Right Front).

The R1 Concepts HSK-76096 stainless steel braided brake hose is a high-performance replacement for the factory rubber line. Traditional rubber hoses are prone to expansion under hydraulic pressure, which creates a spongy pedal feel and inconsistent braking. This braided stainless steel hose eliminates that flex, ensuring maximum hydraulic efficiency and a firm, responsive pedal for better modulation during daily driving, towing, or spirited performance.

Built for durability, the hose features a high-strength PTFE inner core capable of withstanding extreme pressure and heat. This core is wrapped in a stainless steel weave and finished with a clear, abrasion-resistant PVC outer coating that protects against dirt, debris, and corrosion. This DOT-approved hose is precision-engineered for a direct-fit installation into factory mounting points.

• Part Number: HSK-76096
• Position: Right Front
• Materials: PTFE inner core with stainless steel braided exterior
• Finish: Clear abrasion-resistant PVC coating
• Compliance: United States DOT approved for street use
• Installation: Direct-fit design; includes banjo bolts and copper washers where applicable
• Hardware: Includes necessary mounting brackets for a secure factory-style fit

Fits 2008-2021 Toyota Sequoia.

The R1 Concepts HSK-76246 Left Rear Stainless Steel Brake Hose replaces the flexible factory rubber line to provide a firmer, more responsive brake pedal. Standard rubber hoses often expand under high hydraulic pressure, resulting in a spongy feel and inconsistent braking performance. This braided stainless steel hose eliminates that expansion, ensuring direct pressure transfer to the caliper for better modulation during towing, off-roading, or daily driving.

Engineered for durability, this hose features a PTFE inner core for superior pressure resistance, wrapped in a high-strength stainless steel braided weave. A clear, abrasion-resistant PVC outer coating protects the assembly from dirt, debris, and corrosion. Every line is United States DOT approved to meet strict safety and quality standards for street use.

• Prevents hose expansion for a consistent, firm brake pedal feel
• High-strength stainless steel braided exterior for maximum durability
• PTFE inner core for superior hydraulic pressure resistance
• Abrasion-resistant clear PVC coating prevents chaffing and corrosion
• United States DOT approved for street and highway safety compliance
• Direct-fit design utilizes factory mounting points
• Includes necessary banjo bolts and copper washers (where applicable)
• Manufacturer Part Number: HSK-76246

Fits 2008-2022 Toyota Sequoia models. These R1 Concepts front stainless steel brake lines are engineered to eliminate the spongy pedal feel associated with factory rubber hoses. By replacing the flexible OE lines with a pressure-resistant PTFE core wrapped in a high-strength stainless steel braid, these lines prevent expansion under high hydraulic loads. This results in more consistent braking response and improved modulation whether you are towing, off-roading, or daily driving.

The HSK-76100 kit features an abrasion-resistant clear PVC outer coating to protect the braided weave from dirt, road debris, and corrosion. This multi-layer construction ensures a significantly longer service life compared to standard hoses and maintains hydraulic efficiency under aggressive driving conditions. Each kit is precision-engineered for a direct-fit installation into factory mounting points.

• Stainless steel braided exterior prevents hose expansion and line flex
• PTFE inner core for superior pressure resistance and thermal stability
• Clear PVC coating protects against chaffing and environmental corrosion
• United States DOT approved for street-legal safety compliance
• Direct-fit design includes precision-engineered fittings and mounting brackets
• Includes banjo bolts and copper washers (where applicable)
• Manufacturer Part Number: HSK-76100

Fits 1992-2001 Lexus ES300 (Right Rear).

Upgrade your braking system's hydraulic efficiency with the R1 Concepts Stainless Steel Brake Hose. Designed as a direct replacement for the factory rubber line, this hose eliminates the expansion and "sponginess" common in OE rubber hoses under high pressure. By maintaining a consistent internal diameter even during aggressive braking, this hose provides a firmer, more communicative pedal feel and more precise brake modulation.

Constructed with a heavy-duty PTFE inner core, the line is wrapped in a high-tensile stainless steel braided weave for maximum pressure resistance. A clear, abrasion-resistant PVC outer coating is applied to protect the braid from dirt, debris, and corrosion, ensuring a long service life in harsh road conditions. This hose is United States DOT approved, meeting all safety standards for street use.

• Manufacturer Part Number: HSK-76166
• Position: Right Rear
• Material: PTFE inner core with 304 stainless steel braided exterior
• Coating: Clear PVC protective outer layer
• Compliance: DOT approved for street use
• Performance: Reduces line flex and expansion for improved pedal response
• Installation: Direct-fit design using factory-style mounting points

Fits 1998-2007 Lexus LX470.

This R1 Concepts stainless steel braided brake hose replaces the factory left front rubber line to eliminate hose expansion under high hydraulic pressure. By reducing line flex, this upgrade provides a firmer, more responsive brake pedal and more consistent modulation during heavy braking, towing, or off-road use. The direct-fit design ensures a secure installation using factory-style mounting points.

• Durable Construction: Features a PTFE inner core wrapped in a high-strength stainless steel braided weave for superior pressure resistance and longevity.
• Protective Coating: A clear, abrasion-resistant PVC outer jacket prevents chafing and protects the stainless braid from dirt, debris, and corrosion.
• Street Legal: United States DOT approved, meeting strict safety and quality standards for street use.
• Complete Hardware: Includes necessary banjo bolts and copper washers where applicable for a leak-free seal.
• Manufacturer Part Number: HSK-76079

Fits 1997-2001 Lexus ES300 (Left Front).

R1 Concepts Stainless Steel Brake Hoses are engineered to eliminate the spongy pedal feel common with factory rubber lines. By replacing expanding rubber with a high-strength stainless steel braided weave over a PTFE inner core, these hoses maintain consistent hydraulic pressure. This results in a firmer, more responsive brake pedal and improved modulation, providing better control during spirited driving, towing, or emergency stops.

Built to withstand harsh environments, each hose features an abrasion-resistant clear PVC outer coating that protects the stainless braid from dirt, debris, and corrosion. These lines are precision-engineered to bolt directly to factory mounting points, ensuring a secure and straightforward installation.

• Manufacturer Part Number: HSK-76050
• Construction: Braided stainless steel exterior with a pressure-resistant PTFE inner core
• Finish: Clear PVC outer coating for abrasion and corrosion resistance
• Compliance: United States DOT approved for street use
• Mounting: Direct-fit design with factory-style fittings and brackets
• Included Hardware: Banjo bolt and copper washers included where applicable

Fits 2005-2015 Toyota Tacoma 5-lug models.

The R1 Concepts Stainless Steel Brake Hose (HSK-76218) is a performance-oriented replacement for the factory rubber line on the right rear position. Unlike standard hoses that swell under heavy braking, this braided line maintains its shape under high hydraulic pressure, providing a firmer, more predictable pedal feel. This is a critical upgrade for maintaining consistent stopping power during towing, off-roading, or aggressive street use.

Constructed with a PTFE inner core for superior chemical and heat resistance, the hose is wrapped in a high-strength stainless steel weave to prevent expansion. A clear PVC outer coating protects the assembly from abrasion, road debris, and corrosion. This direct-fit hose is designed for secure mounting and include the necessary banjo bolts and copper washers where required for a leak-free installation.

• Direct-fit for the right rear position on 5-lug Tacoma models
• Braided stainless steel exterior prevents line expansion and hose flex
• PTFE inner core resists high temperatures and hydraulic pressure
• Clear PVC outer jacket protects against abrasion and road salt
• United States DOT approved for street use
• Includes banjo bolts and copper washers where applicable
• Manufacturer Part Number: HSK-76218

Fits 1993-1995 Mazda RX-7.

R1 Concepts Stainless Steel Brake Lines are engineered to eliminate the spongy pedal feel often found with factory rubber hoses. By replacing flexible OE components with these stainless steel braided lines, you maintain consistent hydraulic pressure and improve brake modulation. This direct-fit upgrade provides a firmer, more responsive pedal under heavy braking, whether on the street or during performance driving.

Each hose features a high-grade PTFE inner core that resists heat and pressure, encased in a durable stainless steel braid to prevent expansion. A clear, abrasion-resistant PVC outer coating is applied to protect the braid from road debris, dirt, and corrosion, ensuring a long service life. These lines are DOT approved to meet safety standards and include all necessary hardware for a secure installation.

• High-strength stainless steel braided exterior prevents hose expansion
• PTFE inner core for superior pressure resistance and consistent performance
• Clear PVC coating protects against abrasion, chaffing, and corrosion
• United States DOT approved for street use and safety compliance
• Precision-engineered fittings ensure a direct-fit to factory mounting points
• Includes banjo bolts and copper washers where applicable
• Manufacturer Part Number: HSK-80022

Fits 2005-2010 Scion tC (Right Front).

Standard rubber brake hoses often expand under high hydraulic pressure, leading to a soft or spongy pedal feel. R1 Concepts stainless steel braided brake hoses are engineered to eliminate this expansion, providing a firmer, more responsive pedal and consistent brake modulation. This direct-fit replacement for the factory right front line improves hydraulic efficiency whether you are navigating daily traffic, towing, or engaging in spirited driving.

• High-strength braided stainless steel exterior prevents hose swell under heavy braking.
• PTFE (Polytetrafluoroethylene) inner core provides superior pressure resistance and long-term durability.
• Clear abrasion-resistant PVC outer coating protects the braid from dirt, debris, and corrosion.
• United States DOT approved for street use and safety compliance.
• Precision-engineered fittings and integrated mounting brackets ensure a secure, factory-style installation.
• Includes banjo bolt and copper crush washers where applicable for a complete service.
• Manufacturer Part Number: HSK-76058

Fits 1995-2000 Toyota 4Runner (Rear).

Upgrade your vehicle's braking response with R1 Concepts Stainless Steel Brake Lines. Unlike traditional rubber hoses that expand under hydraulic pressure, these braided lines utilize a high-strength stainless steel exterior to significantly reduce line flex. This results in a firmer, more consistent pedal feel and improved brake modulation, whether you are daily driving, towing, or navigating off-road terrain.

Each hose is constructed with a PTFE inner core for superior pressure resistance and finished with a clear, abrasion-resistant PVC outer coating. This jacket protects the stainless steel weave from dirt, debris, and corrosion, ensuring a long service life in harsh environments. These lines are precision-engineered for a direct-fit installation, utilizing factory-style mounting points to eliminate the need for custom fabrication.

• PTFE inner core provides superior resistance to high hydraulic pressures
• 304 stainless steel braided exterior prevents hose expansion and improves pedal feel
• Clear PVC outer coating protects against abrasion and corrosion
• United States DOT approved for street use and safety compliance
• Includes necessary banjo bolts and copper washers (where applicable)
• Direct-fit design replaces factory part number HSK-76012

Fits 1995-2004 Toyota Tacoma (Left Front position).

Replace your compliant factory rubber brake lines with the R1 Concepts Stainless Steel Braided Brake Hose to eliminate pedal sponginess and improve overall braking response. Unlike OEM rubber hoses that expand under hydraulic pressure, this stainless steel line features a high-strength braided weave that maintains its shape even during heavy braking, towing, or off-road use. This improved hydraulic efficiency results in a firmer, more consistent pedal feel and better brake modulation.

Engineered for durability in harsh environments, this hose utilizes a PTFE inner core for superior pressure resistance and chemical stability. The stainless steel braid is encased in a clear PVC outer coating to prevent abrasion, corrosion, and debris buildup, ensuring a long service life. This direct-fit hose is designed to mount to factory locations using the included hardware for a straightforward installation.

• Performance Upgrade: Reduces line expansion for improved hydraulic efficiency and firmer pedal feedback.
• Robust Construction: PTFE inner core with stainless steel braided exterior and clear PVC protective coating.
• Street Legal: United States DOT approved to meet strict safety and quality standards.
• Installation Hardware: Includes necessary banjo bolts and copper washers where applicable for a secure fit.
• Part Number: HSK-76046

Fits 2002-2003 Lexus ES300 (Right Front).

R1 Concepts Stainless Steel Brake Lines replace soft factory rubber hoses to eliminate the "spongy" pedal feel caused by hose expansion under pressure. These lines are engineered for consistent hydraulic pressure and improved brake modulation, whether you are daily driving, towing, or navigating aggressive street conditions. By maintaining a firmer pedal, they provide the driver with more precise control and confidence during heavy braking maneuvers.

Construction features a high-grade PTFE inner core that is highly resistant to pressure and heat. This core is protected by a high-strength stainless steel braided weave that prevents line swell. A clear, abrasion-resistant PVC outer coating is applied to protect the braid from dirt, debris, and potential chaffing against suspension components. Every line is precision-engineered with factory-style fittings for a secure, direct-fit installation.

• PTFE inner core for superior pressure resistance and thermal stability
• Stainless steel braided exterior prevents hose expansion for a firmer pedal
• Clear PVC outer jacket protects against corrosion and abrasion
• United States DOT approved for street-legal safety and compliance
• Direct-fit design includes application-specific mounting brackets
• Includes banjo bolt and copper crush washers where required
• Manufacturer Part Number: HSK-76081

Fits 1992-2000 Lexus SC300 models. Upgrade your vehicle's braking system with the R1 Concepts Stainless Steel Brake Hose kit, designed to eliminate the spongy pedal feel common with aging rubber lines. These hoses are engineered for high-pressure environments, ensuring consistent hydraulic force reaches your calipers for more precise brake modulation and increased driver confidence during spirited driving or heavy braking.

• Stainless Steel Braided Exterior: High-strength weave prevents hose expansion under high pressure, maintaining a firm and responsive brake pedal.
• PTFE Inner Core: Provides superior resistance to heat and chemical degradation while ensuring smooth fluid flow.
• Protective PVC Coating: A clear, abrasion-resistant outer layer prevents chaffing and protects the braided steel from dirt, debris, and corrosion.
• DOT Approved: Certified to meet strict United States Department of Transportation safety standards for street use.
• Direct-Fit Installation: Precision-engineered fittings and included hardware ensure a secure, factory-style fitment without modifications.
• MPN: HSK-75032

Fits 2011-2017 Lexus CT200h (Right Front).

Replace the soft factory rubber lines on your Lexus with the R1 Concepts Stainless Steel Brake Hose (HSK-76108) to improve braking performance and pedal consistency. Standard rubber hoses are prone to expansion under high hydraulic pressure, leading to a spongy pedal feel. These R1 Concepts lines utilize a high-strength stainless steel braided weave that prevents line flex, delivering a firmer, more responsive brake pedal and superior modulation for daily driving or spirited performance.

Built for durability, each hose features a PTFE inner core for maximum pressure resistance and a clear, abrasion-resistant PVC outer coating. This coating protects the stainless steel braid from chaffing, road debris, and corrosion, ensuring long-term reliability in all weather conditions.

• Direct-Fit Design: Precision-engineered fittings and factory-style mounting brackets ensure a secure, bolt-on installation.
• DOT Approved: Fully compliant with United States DOT safety standards for street use.
• Premium Construction: PTFE inner core and braided stainless steel exterior eliminate hose expansion.
• Enhanced Protection: Clear PVC sleeve prevents environmental damage and chaffing.
• Installation Hardware: Includes required banjo bolts and copper washers where applicable.
• Manufacturer Part Number: HSK-76108