Fits 2006-2013 BMW 3 Series (E90 Sedan / E92 Coupe) 2WD models including 325i, 328i, 330i, 335i, 335is, and 335d.

The KW V1 INOX-LINE coilover kit is the ideal entry point into street performance suspension, offering a fixed, pre-configured damping setup specifically tuned for the E90 and E92 chassis. By replacing the factory struts and shocks with high-quality stainless steel housings, these coilovers reduce body roll and sharpen steering response while maintaining a balanced ride quality suitable for daily driving.

Each kit features KW proprietary Inox-line stainless steel technology for permanent corrosion resistance, ensuring the trapezoid threads and composite adjustment collars remain functional even after years of exposure to road salt and debris. Every damper is dyno-tested for accuracy and hand-built in Germany to provide a direct, sporty handling feel.

• Inox-line stainless steel strut housings for 100% corrosion resistance
• Polyamide composite spring perches with stainless steel inserts for durability
• Vehicle-specific spring rates and damping precisely tuned by KW engineers
• Elastomer bump stops with integrated dust protection systems
• Friction-optimized trapezoid threads for seamless ride height adjustment
• Every damper is dyno-tested to ensure performance and accuracy
• Limited Lifetime Warranty with unlimited mileage

Fits 2014-2019 Chevrolet Corvette (C7) Stingray, Z06, Grand Sport, and ZR1 models equipped with electronic shock control. This kit provides a high-performance suspension solution for C7 owners looking to transcend factory damping limitations while maintaining street-legal compliance.

The KW V3 coilover kit utilizes race-bred technology to significantly reduce pitching and rolling movements during aggressive maneuvers, braking, and acceleration. By replacing the OE dampers with KW’s inox-line stainless steel units, you gain independent control over both compression and rebound stages. This allows for precise chassis tuning to match specific tire characteristics, vehicle weight changes, or personal driving preferences without compromising the matching of the spring rate to the rebound damping.

• TVR-A (Twin Valve Rebound - Adjustable): Features a conical low-speed bypass for comfort during slow damper speeds and a main valve that opens for high-speed fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable): Patented valve technology for fine-tuning low-speed compression, including a blow-off feature for high-piston speeds.
• Inox-Line Stainless Steel: Permanent corrosion resistance that ensures adjustment threads remain functional for the life of the vehicle.
• Composite Spring Perches: Friction-optimized polyamide composite with stainless steel inserts for maximum strength and oxidation resistance.
• Quality Assurance: Each kit is hand-built in Fichtenberg, Germany, individually serial-numbered, and dyno-tested to ensure performance accuracy.
• Protection: Integrated dust protection and resilient elastomer bump stops act as dynamic load limiters to protect seals and maintain ride quality.

Fits 2020-2026 BMW X5 M and X6 M, including Competition models.

The KW V4 coilover kit brings race-derived 3-way damping technology to the BMW F95/F96 chassis. Developed for high-performance SUVs, this system allows for independent adjustment of rebound damping, low-speed compression, and high-speed compression. This level of control enables drivers to fine-tune the suspension for specific road conditions, tire setups, or track requirements while maintaining the daily usability expected of a premium M-series vehicle.

• TVR-A (Twin Valve Rebound - Adjustable): Patented technology uses a conical low-speed bypass for slow damper speeds and a main rebound stage for high fluid displacement during aggressive driving.
• TVCLH-A (Twin Valve Compression Low High - Adjustable): Provides separate control over low-speed and high-speed compression damping to manage body roll and high-velocity impacts independently.
• Chassis Specific Engineering: Includes solid aluminum unibal top mounts to eliminate deflection and sharpen steering response.
• Precision Manufacturing: Each kit is hand-built in Fichtenberg, Germany, individually serialized, and dyno-tested to ensure damping accuracy before shipment.
• Performance Setup: Delivered with vehicle-specific comfort settings that can be quickly adjusted using integrated controls.
• Manufacturer Part Number: 3A7200CR

Fits 2014-2019 Porsche 911 GT3 and 2016 Porsche Cayman GT4.

When upgrading a Porsche to high-performance aftermarket coilovers, removing the factory-equipped electronic dampers typically triggers dashboard error messages and may limit certain vehicle functions. The KW Electronic Damping Cancellation Kit (68510411) provides a clean, plug-and-play solution to disable these warnings while maintaining the full functionality of the vehicle's cabin-controlled drive modes and other electronic systems.

• Prevents fault codes and error messages when factory electronic dampers are removed
• Maintains original drive mode functionality for non-damping systems
• OEM-quality connectors for a secure, direct-fit installation
• Compatible with any aftermarket suspension system
• Made in Germany and engineered to exceed original equipment standards
• Manufacturer Part Number: 68510411

Fits 2018-2026 Tesla Model 3 and Model Y (Long Range, Performance, and Premium AWD models).

The KW V1 Inox-Line coilover kit is engineered for drivers seeking a balanced, sporty suspension setup with pre-configured damping. This kit replaces factory struts and springs with vehicle-specific hardware developed through rigorous testing on the Nürburgring Nordschleife and the KW 7-post chassis dynamics test center. By utilizing KW's proprietary Inox-Line stainless steel technology, these coilovers provide permanent corrosion resistance and a long service life, even in extreme winter conditions.

Each kit is hand-assembled in Fichtenberg, Germany, and every individual damper is dyno-tested to ensure performance accuracy before shipment. The system allows for seamless ride height adjustment within an approved range, reducing body roll and improving handling directness while maintaining adequate suspension travel.

• Construction: Inox-Line stainless steel strut housings for 100% corrosion resistance.
• Adjustment: Dirt-resistant trapezoid threads and friction-optimized polyamide composite collars for easy height tuning.
• Protection: Elastomer bump stops with integrated dust systems protect the piston rods and seals from road debris.
• Testing: Each damper is dyno-tested and assigned a unique serial number.
• Fitment: Vehicle-specific spring rates and damping curves for AWD Tesla platforms.
• Part Number: 10287010
• Warranty: Limited Lifetime Warranty - Unlimited Mileage.

Fits 2009-2024 Nissan GT-R (R35) models, including Premium, Nismo, Track Edition, and Black Edition submodels.

The KW V3 (Variant 3) Coilover suspension kit is engineered for performance-oriented drivers seeking technical control over their vehicle's handling dynamics. Utilizing state-of-the-art motorsports technology, this kit provides independent adjustment for both compression and rebound damping, allowing for a precise setup tailored to specific tire characteristics, vehicle weight, and driving conditions. Each kit is hand-built at KW headquarters in Fichtenberg, Germany, and every damper is dyno-tested to ensure accuracy before shipping.

• TVR-A (Twin Valve Rebound - Adjustable): Features a conical low-speed bypass for comfort during slow damper speeds, while the main rebound valve opens at high speeds to manage large fluid displacements.
• TVC-A (Twin Valve Compression - Adjustable): Patented compression valve technology allows for fine-tuning of low-speed compression while maintaining a high-speed blow-off feature to maximize grip and prevent harshness.
• Inox-Line Stainless Steel: Provides permanent corrosion resistance and an unlimited lifespan, ensuring the spring perches remain adjustable even after years of exposure to the elements.
• Composite Spring Perches: Friction-optimized polyamide composite perches with stainless steel inserts prevent oxidation and ensure high-strength durability.
• Precision Engineering: Includes elastomer bump stops with integrated dust protection to shield the piston rod and seals from contaminants.
• Manufacturer Part Number: 35285006

Fits 2008-2013 Cadillac CTS and CTS-V models equipped with factory magnetic ride control.

The KW Variant 3 (V3) coilover kit is engineered for performance-oriented drivers who demand precise control over their Cadillac's handling dynamics. By replacing the factory magnetic ride dampers with KW's patented twin-valve technology, this kit significantly reduces body roll, pitching, and squat during aggressive maneuvers while providing an extensive range of damping adjustability to suit any driving style or tire setup.

Built for longevity, each kit features KW Inox-Line stainless steel strut housings for permanent corrosion resistance. These are paired with friction-optimized polyamide composite spring perches reinforced with stainless steel inserts, ensuring that ride height adjustments remain smooth even after years of use in harsh conditions.

• TVR-A (Twin Valve Rebound - Adjustable) technology: Allows for independent low-speed rebound tuning for steering precision and comfort.
• TVC-A (Twin Valve Compression - Adjustable) technology: Features a patented compression valve for fine-tuning low-speed damping to maximize tire grip and cornering behavior.
• Inox-Line stainless steel construction for maximum durability and unlimited lifespan.
• High-resilient elastomer bump stops with integrated dust protection to preserve piston rod seals.
• Hand-built and dyno-tested in Fichtenberg, Germany to ensure exact tolerances.
• Manufacturer Part Number: 35263003

Fits 1996-2000 Honda Civic and 1996-1997 Honda Civic del Sol models equipped with rear lower fork mounts. This KW Variant 3 (V3) coilover kit (MPN: 35250003) brings German-engineered motorsports technology to the street, providing a significant upgrade in handling precision, vehicle stability, and safety reserves.

The V3 system features independently adjustable rebound and compression damping, allowing drivers to fine-tune their suspension for specific tire characteristics, vehicle weight, or road conditions. By separating these adjustments, you can increase compression damping for better grip and cornering behavior without negatively impacting the rebound stage, ensuring optimal tire contact and repeatable results at the limit of driving dynamics.

• TVR-A (Twin Valve Rebound - Adjustable): Conical low-speed bypass for slow damper speeds and a main valve that opens at high speeds for maximum fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable): Patented valve allows for fine-tuning low-speed compression with a blow-off feature for high-piston speeds to maximize flow.
• Inox-Line Stainless Steel: Provides permanent corrosion resistance, ensuring the threads remain adjustable and the finish remains intact for the life of the vehicle.
• Composite Spring Perch: Made from wear-resistant, friction-optimized polyamide composite with a stainless steel insert for maximum strength and oxidation resistance.
• Technical Integrity: Every damper is hand-built in Fichtenberg, Germany, and dyno-tested to ensure accuracy before release.

Fits 2020-2025 BMW X3 M and X4 M models, including Competition variants.

The KW V3 coilover kit is engineered for performance-oriented drivers seeking technical control over their vehicle's suspension dynamics. Utilizing patented motorsports technology, this kit provides a significant improvement in steering precision, directional stability, and cornering grip. By separately adjusting the rebound and compression damping, you can fine-tune the handling characteristics to account for vehicle weight, tire selection, and chassis rigidity without compromising ride quality.

Every KW V3 system is manufactured at KW’s headquarters in Germany, featuring Inox-Line stainless steel strut housings for permanent corrosion resistance. The dampers are equipped with TVR-A and TVC-A valving, allowing for independent low-speed adjustment while maintaining a blow-off feature for high-speed impacts. This ensures the tires stay in contact with the road during aggressive driving maneuvers and sudden load changes.

• TVR-A (Twin Valve Rebound - Adjustable): 16 clicks of adjustment to control the low-speed bypass flow for steering response and stability.
• TVC-A (Twin Valve Compression - Adjustable): 12 clicks of adjustment to manage the high-speed compression damping and tire grip.
• Inox-Line Technology: Stainless steel construction prevents oxidation and ensures the composite spring perches remain adjustable for the life of the vehicle.
• Dyno-Verified: Every damper is tested for accuracy and preset to KW's recommended settings before shipping.
• MPN: 352200DE

Fits 2001-2006 BMW M3 (Base) models.

The KW Suspensions V1 (Variant 1) Inox-Line coilover kit is the definitive entry point into the KW street performance lineup, specifically engineered for the E46 M3 chassis. This kit replaces factory dampers and springs with high-quality stainless steel struts and corrosion-resistant springs, providing a significant upgrade in handling precision and vehicle stance. Every kit is pre-configured by KW engineers with vehicle-specific spring rates and damping profiles, tuned through rigorous testing on the Nürburgring Nordschleife and the KW 7-post chassis dynamics center.

• Inox-Line Stainless Steel: Features 100% corrosion-resistant strut housings for an unlimited lifespan and permanent adjustability.
• Preset Dampers: Factory-tuned damping rates eliminate guesswork, providing an optimal balance of sporty handling and ride comfort.
• Trapezoidal Threading: Dirt-resistant threads and friction-optimized polyamide composite collars allow for seamless ride height adjustments.
• Protective Components: Elastomer bump stops with integrated dust protection shield the piston rods and seals from road debris and moisture.
• Dyno Tested: Every individual damper is dyno-tested for accuracy and performance before leaving the factory in Fichtenberg, Germany.
• Manufacturer Part Number: 10220023
• Warranty: Limited Lifetime Warranty with unlimited mileage.

Fits select 2014-2016 Porsche 911 Carrera 4S, Carrera 4 GTS, Turbo, and Turbo S models equipped with PDCC (Type 991).

The KW H.A.S. (Height Adjustable Spring) kit provides a bridge between traditional fixed lowering springs and full coilover systems. Unlike standard springs that offer a single static drop, this system allows for continuous ride height adjustment even after installation. This flexibility lets you fine-tune the vehicle's stance and center of gravity using the included threaded KW height adjusters.

Engineered specifically for the Porsche 911 (991) chassis, these kits are designed to work in harmony with the factory electronic dampers and Porsche Dynamic Chassis Control (PDCC). The spring rates are optimized for the OE suspension characteristics and wheel loads, ensuring improved steering response and more agile handling without compromising the functionality of your factory driver assistance systems or adaptive suspension modes.

• Individual height adjustability for each corner
• High-strength chrome-silicon steel springs with multi-layer coating
• Retains full functionality of factory electronic and adaptive suspension systems
• Vehicle-specific elastomer bump stops and dust protection included
• Tested and tuned on the Nurburgring Nordschleife
• Manufacturer Part Number: 25371051
• Limited Lifetime Warranty

Fine-tune your vehicle's ride height or compensate for sagging suspension with the KW Universal 30mm Spring Spacer. This precision-engineered component provides a fixed 30mm lift, allowing for improved ground clearance or chassis leveling when using coil spring setups.

Constructed from high-grade aluminum, this spacer is built to withstand the constant compression loads of a suspension system while offering superior resistance to corrosion and wear. Its universal design makes it a versatile solution for custom suspension tuning and specialized height adjustments.

• Spacer Height: 30mm
• Material: High-strength aluminum
• Fitment: Universal application for coil springs
• Manufacturer Part Number: 65030046

Fits 2018-2025 Audi RS5 and RS5 Sportback (Base) models equipped with Dynamic Ride Control.

The KW V3 (Variant 3) Coilover Kit brings cutting-edge motorsports technology to the street, providing professional-grade damping control for the Audi RS5. Engineered and hand-built in Fichtenberg, Germany, this kit replaces the factory suspension with a system that significantly reduces pitching and rolling during aggressive cornering, acceleration, and braking. By utilizing patented valve technology, the KW V3 allows for independent adjustment of rebound and compression damping, enabling you to fine-tune the chassis to your specific tire characteristics, vehicle weight, and driving preferences.

• TVR-A (Twin Valve Rebound - Adjustable): Allows for 16 clicks of low-speed rebound adjustment through a conical bypass, while the high-speed main valve opens to manage large fluid displacements.
• TVC-A (Twin Valve Compression - Adjustable): Features 12 clicks of low-speed compression adjustment to control steering behavior and body roll without affecting the high-speed blow-off for bump absorption.
• Inox-Line Construction: Stainless steel strut housings provide permanent corrosion resistance and an unlimited lifespan, ensuring height adjustments remain easy even after years of use.
• Composite Spring Perches: Friction-optimized polyamide composite perches with stainless steel inserts prevent oxidation and maximize strength.
• Pre-set Performance: Each individual damper is dyno-tested and delivered with KW’s recommended baseline settings.
• Manufacturer Part Number: 352100CJ

Fits 2022-2026 BMW M4 models, including Base, Competition, Competition xDrive, CS, and CSL.

The KW H.A.S. (Height Adjustable Spring) kit provides a dynamic lowering solution for your BMW M4 without the limitations of conventional fixed-rate lowering springs. Unlike standard springs that lock you into a specific ride height, the KW H.A.S. system features an integrated height adjuster that allows you to fine-tune your vehicle's stance even after installation. This system is engineered to work harmoniously with your factory adaptive or electronic suspension, ensuring all driver assistance systems and comfort features remain fully operational.

Each kit is constructed from multi-coated chrome-silicon steel, featuring spring rates specifically calculated for the BMW M4's OE dampers and wheel loads. KW engineers develop these vehicle-specific parameters through rigorous testing on the Nurburgring Nordschleife and the KW 7-post Driving Dynamic Test Center to deliver more agile steering response and improved handling without sacrificing ride quality.

• Precision Adjustment: Achieve a continuous adjustable ride height within a technical range for the perfect stance.
• OE Integration: Mainatins the full functionality of factory electronic and adaptive damping systems.
• High-Quality Construction: Springs made of high-strength chrome-silicon steel for long-term durability.
• Complete Protection: Includes vehicle-specific elastomer bump stops and a dust protection system to shield factory dampers from debris.
• Tested Performance: Developed and tested using KW’s proprietary 7-post driving dynamic technology.
• Part Number: 253200EK

Fits select 2012-2021 BMW 2 Series, 3 Series, and 4 Series models, including 228i, 230i, 335i, 340i, 435i, 440i, M235i, and M240i.

The KW V2 Inox-Line coilover kit is engineered for drivers who require precise control over their vehicle's damping characteristics. Utilizing patented TVR-A (Twin Valve Rebound - Adjustable) technology, these coilovers offer 16 clicks of rebound adjustment, allowing you to fine-tune the balance between ride comfort and body control. The two-stage valving ensures that low-speed damping can be adjusted for handling precision while the high-speed bypass maintains comfort during sudden impacts.

Constructed from "inox-line" stainless steel, these struts are built to withstand harsh environments without corroding. The combination of stainless steel housings and friction-optimized polyamide composite spring perches ensures that ride height remains easily adjustable even after years of use. Every kit features vehicle-specific spring rates and is dyno-tested to ensure performance and reliability.

• Manufacturer Part Number: 1522000F
• Damping Technology: TVR-A 16-way adjustable rebound
• Material: Inox-Line stainless steel strut housings
• Adjustment: Individual height adjustment with dirt-resistant trapezoidal threads
• Components: Polyamide composite spring perches with stainless steel inserts
• Protection: Elastomer bump stops with integrated dust protection systems
• Testing: Vehicle-specific setups tuned on the Nurburgring and 7-post dyno

Fits select 2019-2025 BMW 330i xDrive, M240i xDrive, and M340i xDrive models (G20/G42) without factory electronic dampers. The KW V1 Inox-Line coilover kit is the ideal entry point into street performance suspension, offering a pre-configured damping setup that balances sporty handling with everyday ride quality.

Engineered specifically for each vehicle application, the KW V1 kit utilizes high-quality Inox-Line stainless steel struts for permanent corrosion resistance. Unlike mass-produced generic kits, every KW damper is dyno-tested and tuned on the Nurburgring and at the KW 7-post chassis dynamics center to ensure optimal spring rates and damping curves. The trapezoid thread and composite adjustment collar allow for precise ride height adjustments even after years of exposure to the elements.

• Inox-Line Stainless Steel: 100% corrosion-resistant construction with an unlimited lifespan.
• Preset Damping: Factory-tuned balance of sportiness and comfort specifically for xDrive chassis.
• Composite Spring Perch: Friction-optimized polyamide composite with a stainless steel insert to prevent oxidation.
• Integrated Protection: Elastomer bump stops with integrated dust systems prevent water and dirt from reaching piston rods and seals.
• Quality Assurance: Hand-built in Fichtenberg, Germany, and individually dyno-tested for accuracy.
• Manufacturer Part Number: 102200DK
• Warranty: Limited Lifetime Warranty - Unlimited Mileage

With the KW V1 coilovers, body roll is reduced during compression, giving you more direct and sporty handling while maintaining maximum lowering within an approved range for proper suspension travel.

Fits 2021-2025 Porsche 911 Turbo, Turbo S, and Turbo 50 Years models.

The KW H.A.S. (Height Adjustable Spring) kit offers a dynamic alternative to conventional lowering springs by providing the height adjustability typically reserved for full coilover systems. Unlike fixed lowering springs, this kit utilizes a threaded height adjuster that allows you to fine-tune the vehicle's ride height even after installation. This flexibility ensures you can achieve the perfect stance while improving steering agility and response.

Engineered for high-performance applications, these kits are designed to remain fully compatible with factory adaptive or electronic suspension systems. Every spring is manufactured from high-quality, multi-coated chrome-silicon steel, with rates specifically tuned to match the OE damper characteristics and wheel loads of the 992-generation Porsche 911 Turbo.

• Millimeter-Precision Tuning: Threaded height adjusters allow for continuous ride height adjustment within a technical-tested range.
• Retains Factory Electronics: Maintains the full functionality of Porsche’s adaptive suspension and driver assistance systems.
• High-Strength Materials: Springs constructed from durable chrome-silicon steel for long-term fatigue resistance.
• Integrated Protection: Includes vehicle-specific elastomer bump stops and dust protection systems to prevent damper wear from road debris.
• Rigorous Testing: Developed and tested on the Nurburgring Nordschleife and the KW 7-post driving dynamic test center.
• Manufacturer Part Number: 25371090
• Warranty: Limited Lifetime Warranty / Unlimited Mileage.

Fits 2020-2026 BMW X5 M and X6 M models, including Competition trims, equipped with factory electronic dampers.

KW Height Adjustable Spring (H.A.S.) kits provide a significant upgrade over conventional lowering springs by allowing you to fine-tune your vehicle's ride height even after installation. Designed specifically for the BMW F95 X5 M and F96 X6 M chassis, this system integrates seamlessly with the factory electronic damping controls, ensuring all driver assistance systems and comfort features remain fully operational while improving steering response and cornering agility.

Each kit is engineered with high-tensile chrome-silicon steel springs featuring rates optimized for the specific wheel loads of the X5 M and X6 M. Unlike static lowering springs that are limited to a single fixed height, the KW H.A.S. system uses a threaded height adjuster to achieve the perfect stance without compromising the performance of your OE suspension dampers. To ensure long-term durability, the kit includes vehicle-specific elastomer bump stops and a dust protection system to shield your factory struts from road debris and wear.

• Precision Adjustment: Continuous ride height adjustment within a tested range, similar to a coilover system.
• Factory Integration: Maintains complete functionality of BMW’s factory adaptive or electronic suspension.
• Premium Materials: Multi-coated chrome-silicon steel springs for maximum longevity and sag resistance.
• Tested Performance: Parameters developed and validated through testing at the Nurburgring Nordschleife and the KW 7-post driving dynamic center.
• Included Hardware: Vehicle-specific bump stops and dust protection elements included.
• MPN: 253200ED

Fits 2022-2026 Audi RS3 Base models.

The KW H.A.S. (Height Adjustable Spring) kit provides a versatile alternative to conventional lowering springs, allowing you to fine-tune your vehicle's stance without being locked into a fixed drop. Unlike standard springs, this system features a threaded height adjuster that enables precise ride height modifications even after the kit is installed. This ensures you can achieve the perfect balance between aggressive aesthetics and daily drivability.

Engineered to work in harmony with the Audi RS3's factory adaptive or electronic suspension, this kit maintains the full functionality of your OE driver assistance systems and comfort features. Each spring is manufactured from high-tensile, multi-coated chrome-silicon steel, with spring rates specifically calibrated for the vehicle's unique wheel loads and damper characteristics. The result is more agile steering response and improved handling dynamics without sacrificing the ride quality of the original electronic dampers.

• Precision Adjustment: Continuous ride height adjustment within a tested range for millimeter-perfect fitment.
• Premium Construction: High-strength chrome-silicon steel springs for long-term durability and performance.
• OEM Integration: Designed to function seamlessly with factory electronic suspension systems.
• Complete Hardware: Includes vehicle-specific elastomer bump stops and a dust protection system to prevent premature wear on factory dampers.
• Proven Performance: Development includes rigorous testing at the Nürburgring Nordschleife and the KW 7-post driving dynamic test center.
• MPN: 253100DV
• Warranty: Limited Lifetime Warranty (Unlimited Mileage).

Fits select 2018-2025 Audi Q5 and SQ5 (FY) models equipped with factory Adaptive Damping Suspension.

The KW H.A.S. (Height Adjustable Spring) kit provides a significant upgrade over conventional lowering springs by allowing you to dial in your vehicle's ride height even after installation. Unlike fixed-rate springs, this system utilizes a threaded height adjuster that works in tandem with your factory dampers, maintaining the full functionality of your Audi's electronic or adaptive suspension systems. This ensures you retain factory comfort and driver assistance features while achieving a more aggressive stance and improved steering response.

Every kit is engineered for vehicle-specific wheel loads and damper characteristics. KW uses high-tensile chrome-silicon steel for the springs, paired with application-specific elastomer bump stops and a dust protection system to prevent premature wear on your factory suspension components from road debris.

• Precision Adjustment: Continuous ride height adjustment within a tested range, similar to a coilover system.
• OEM Integration: Specifically tuned to work with factory adaptive/electronic dampers.
• Premium Construction: High-strength, multi-coated chrome-silicon steel springs for long-term durability.
• Complete Hardware: Includes vehicle-specific bump stops and dust protection boots.
• Manufacturer Part Number: 253100BZ
• Warranty: Limited Lifetime Warranty - Unlimited Mileage

Fits 2000-2006 Audi TT Quattro and 2004 Volkswagen R32 Base.

The KW V2 Inox-Line coilover kit is designed for drivers seeking more than just a lowered stance. Featuring KW’s patented TVR-A (Twin Valve Rebound - Adjustable) technology, this kit allows for 16 precise clicks of rebound damping adjustment. This two-stage system uses a conically shaped low-speed bypass for oil flow during slow damper movements, while the main rebound valve opens at higher speeds to manage larger fluid volumes, maintaining ride comfort without sacrificing high-speed body control.

Built for long-term durability, the V2 series features Inox-Line stainless steel strut housings that provide permanent corrosion resistance, ensuring the trapezoid threads remain clean and adjustable for years. Each kit is vehicle-specifically tuned on the Nürburgring Nordschleife and KW’s 7-post driving dynamic test center to ensure optimal spring rates and damper valving.

• TVR-A Technology: 16-way adjustable rebound damping to fine-tune handling and comfort.
• Inox-Line Stainless Steel: 100% corrosion-resistant strut bodies with an unlimited lifespan.
• Composite Spring Perches: Friction-optimized polyamide composite with a stainless steel insert to prevent oxidation and seizing.
• Elastomer Bump Stops: Integrated dust protection system prevents contaminants from reaching the piston rod seals.
• Precision Manufacturing: Hand-built in Fichtenberg, Germany, with each damper dyno-tested for accuracy.

• Manufacturer Part Number: 15280081
• Material: Inox-Line Stainless Steel
• Damping Adjustment: 16-click Rebound (TVR-A)
• Lowering Range: Vehicle-specific approved range

Fits select 2008-2017 Audi A4, A4 Quattro, A5, A5 Quattro, RS5, S4, and S5 models without electronic damping control.

The KW V1 Inox-Line coilover kit is engineered for street performance, providing a balanced, sporty feel through vehicle-specific damping and spring rates. Each kit features Inox-Line stainless steel struts for permanent corrosion resistance, ensuring the trapezoid threads and composite adjustment collars remains functional even after years of exposure to the elements. By reducing body roll during compression, these coilovers deliver more direct handling and a lower center of gravity while maintaining adequate suspension travel for daily driving.

• Inox-Line Stainless Steel: Provides 100% corrosion resistance and an unlimited lifespan compared to galvanized alternatives.
• Pre-set Damping: Optimally tuned by KW engineers for a balance of sportiness and comfort; no manual adjustment required.
• Composite Spring Perches: Wear-resistant polyamide composite with a stainless steel insert prevents oxidation and seizing.
• Elastomer Bump Stops: Integrated dust protection prevents debris from reaching the piston rod and seals.
• Quality Tested: Every damper is dyno-tested and developed using KW's 7-post chassis dynamics test center and Nürburgring Nordschleife testing.
• Manufacturer Part Number: 10210075
• Warranty: Limited Lifetime Warranty with unlimited mileage.

The KW 8mm Rebound Adjustment Extension (350mm) is designed to provide easy access to rebound damping adjusters that are difficult to reach due to vehicle trim, interior panels, or deep suspension towers. This tool allows for quick tuning of your KW coilover system without the need for component disassembly or awkward reaching.

• Length: 350mm
• Diameter: 8mm
• Secure Fitment: Features an integrated locking screw to ensure the extension remains firmly attached to the adjuster, preventing it from slipping or becoming lost.
• Construction: High-quality materials engineered for precision adjustment feel.
• Origin: Made in Germany at KW's Fichtenberg facility.
• Manufacturer Part Number: 68525018

Fits select 2021-2026 BMW M3 (G80) and M4 (G82) models, including Base, Competition, CS, and CSL variants.

The KW Electronic Suspension Control (ESC) module is a specialized cancellation kit designed for BMW owners upgrading to high-performance aftermarket suspension. When you replace the factory electronic dampers with a coilover system that lacks electronic adjustment, the vehicle's ECU typically triggers error codes and limits drive mode functionality. This module provides a simple, plug-and-play solution to maintain your vehicle's electronic integrity.

Developed and manufactured in Fichtenberg, Germany, this module ensures that all in-cabin drive mode settings remain functional, even when the factory dampers are no longer present. It allows you to enjoy the performance of a mechanical suspension setup without dealing with dashboard warning lights or restricted vehicle software.

• Prevents EDC/electronic damper error messages when removing factory shocks
• Maintains the functionality of factory in-cabin drive mode selectors
• Direct integration with factory electronic systems
• High-quality construction "Made in Germany"
• Manufacturer Part Number: 68511187

Fits 2020-2025 Porsche 718 Cayman GT4, GT4 RS, and GTS 4.0.

When upgrading to high-performance aftermarket coilovers, removing the factory electronic damping system often triggers error messages and can limit the vehicle's drive mode functionality. The KW ESC Module (Electronic Suspension Control) provides a seamless solution by bypassing these electronic dampers without interfering with the rest of the car's control systems. This allows you to install your preferred suspension hardware while maintaining full use of the in-cabin drive modes.

Engineered and manufactured at KW's headquarters in Fichtenberg, Germany, this module is built to meet rigorous quality standards and ensures a reliable connection to the factory wiring harness. It is a necessary component for owners looking to maximize mechanical grip through non-electronic suspension without the distraction of dashboard warning lights.

• Prevents electronic damper error messages upon removal of factory shocks
• Maintains original functionality of interior drive mode selectors
• Plug-and-play design for straightforward installation
• Made in Germany with high-quality components
• Manufacturer Part Number: 68511186

Fits 2020-2026 Chevrolet Corvette Stingray.

The KW Electronic Suspension Control (ESC) Module is a specialized EDC cancellation kit designed for Corvette C8 owners upgrading to aftermarket suspension. When the factory electronic dampers are removed for coilovers, the vehicle's onboard computer typically triggers error codes and warning lights. This module bypasses those signals, ensuring the vehicle's electronics remain satisfied and fully functional.

• Prevents suspension-related error messages and dashboard warning lights caused by removing factory electronic dampers.
• Maintains the full functionality of original in-cabin drive modes.
• Engineered for seamless integration with the factory wiring harness.
• Developed and manufactured in Germany to meet strict quality standards.
• Manufacturer Part Number: 68511166

This module is the professional solution for maintaining OE electronic integrity while gaining the performance benefits of a high-end coilover suspension system.

Fits select 2018-2026 BMW (2, 3, 4 Series, Z4), Toyota (GR Supra, GR86), and Volvo (V60) models.

Upgrading to high-performance aftermarket suspension or coilovers often requires removing the factory electronic damping system. Without a proper solution, this removal triggers persistent error messages on the dashboard and may disable other adjustable vehicle dynamics. The KW Electronic Damping Cancellation Kit (EDC Delete) provides a clean, plug-and-play solution that simulates the factory signal to the ECU.

This kit ensures that while the factory dampers are gone, the vehicle’s control units remain functional, maintaining the use of in-cabin drive mode selectors for steering, throttle, and transmission mapping. Designed and manufactured in Germany, these modules are built to withstand the rigors of high-performance driving and environmental exposure.

• Prevents electronic suspension error messages and fault codes
• Preserves factory drive mode selector functionality
• Application-specific connectors for a secure, plug-and-play installation
• Engineered and manufactured in Germany
• Designed for use with aftermarket coilovers or static suspension systems
• Manufacturer Part Number: 68511086
• Limited Lifetime Warranty

Fits 2017-2021 Honda Civic Type R and Civic Type R Limited Edition (FK8).

The KW Electronic Damping Cancellation Kit (part number 68511079) is the definitive solution for owners upgrading their FK8 suspension to aftermarket coilovers. When factory adaptive dampers are removed, the vehicle's ECU typically triggers persistent error messages and may disable certain drive mode features. This kit provides a clean, electronic bypass that communicates with the factory system to suppress warning lights while preserving the functionality of your in-cabin drive mode selectors.

• Prevents electronic damper error messages and dashboard warning lights
• Maintains original in-cabin drive mode selection functionality
• Developed and manufactured by KW automotive in Germany
• Designed specifically for the Honda Civic Type R FK8 chassis electronics
• Direct-fit installation with factory-style connectors
• Manufacturer Part Number: 68511079

Fits 2018-2023 Kia Stinger (CK) models across all trims including GT, GT-Line, and Tribute Edition.

Upgrading your Kia Stinger to a high-performance coilover system typically requires the removal of the factory electronic damping components. Without a bypass, this modification triggers dashboard error messages and can limit the functionality of your vehicle's drive mode settings. The KW Electronic Damping Cancellation Kit (68511070) provides a clean, plug-and-play solution that prevents Malfunction Indicator Light (MIL) warnings while preserving the cabin-controlled drive mode logic.

Engineered in Germany to meet strict quality standards, these modules interface directly with the factory wiring harness. This ensures the ECU receives the correct signal feedback, allowing you to run aftermarket dampers without electronic interference or system faults. The installation is completely reversible and requires no cutting or splicing of the original wiring.

• Prevents electronic suspension error messages (EDC/ESC)
• Maintains functionality of in-cabin drive mode selectors
• Plug-and-play installation with OE-style connectors
• Designed and manufactured in Germany
• Weatherproof housing for long-term durability
• Manufacturer Part Number: 68511070

Vehicle Fitment

Fits select 2015-2023 Audi R8 and Lamborghini Huracan models. The KW Electronic Damping Cancellation Kit provides a specialized solution for owners upgrading to aftermarket suspension systems who want to retain full control over their vehicle's cabin electronics.

When replacing factory electronic dampers with performance coilovers or other non-electronic shocks, the vehicle's ECU typically triggers error messages or enters a restricted mode. This kit plugs directly into the factory wiring harness, effectively bypassing the sensors to prevent dash warnings while maintaining the full functionality of the in-cabin drive mode selection system. Each kit is engineered to handle the specific electrical signals of the Audi and Lamborghini damping systems, ensuring the chassis control module remains satisfied with the signal feedback.

• Prevents electronic damper error messages and dashboard warning lights
• Maintains functionality of factory drive-mode selection profiles
• Engineered and manufactured by KW in Fichtenberg, Germany
• Developed to meet or exceed original equipment manufacturer quality standards
• Designed for seamless integration with the factory wiring harness
• Manufacturer Part Number: 68510489