THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP.Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

• Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Bolt-on Installation. Aggressive Exhaust Tone. MBRP Signature Styling.
• Stainless Steel Tips Are Included
• Improved Torque And Horsepower
• Lower Exhaust Gas Temperatures
• Increased Throttle Response
• Utilizes OEM Hangers
• Mellow Exhaust Note
• 4 Year Warranty
• Bolt On Design

This Part Fits:

THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. Part numbers ending in P and PLM carry a 1-year warranty. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

• Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Bolt-on Installation. MBRP Signature Styling and Sound.
• Delivers A Rich mellow Exhaust Note
• Can Improve Fuel Economy By 1-2 MPG
• Installs With Common Hand Tools
• Boosts Torque And Horsepower
• Improved Throttle Response
• Minimize Back Pressure
• Built To Perform
• 2 Year Warranty

This Part Fits:

THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP.Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

• Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. MBRP Signature Styling and Sound.
• Minimum Degree Mandrel Bends For Smoother Exhaust Flow
• Mirror Polished T304 Stainless Steel Tips
• Easy Install With Common Hand Tools
• Improved Torque And Horsepower
• Lower Exhaust Gas Temperatures
• Increased Throttle Response
• Rich Mellow Exhaust Note
• 3 Year Warranty

This Part Fits:

Your Honda Civic Sport, is a dependable and functional car - add some character by installing the MBRP S4905AL Exhaust system. The S4905AL provides style, durability, and improved tone, enhancing your vehicle. Made from heavy-gagued aluminized steel, this material is excellent for mild climates. The heavy-gauged aluminized steel is good for resisting dings and dents from road debris. This system is designed using jigs for precision and high-quality construction. The S4905AL was engineered to support your engine by providing additional fresh air to the cylinders and improving throttle response. Love the rich exhaust tone produced by the S4905AL; this system produces a pleasant mellow tone, making it perfect for touring around town. Finally, appreciate the enhanced aesthetics with the included 4.5-Inch OD polished tip, this tip brings a distinctive MBRP style to your Civic Sport.

• Heavy-gauged Aluminized Steel. Bolt-On Installation. Smooth Mandrel Bent Tubing. 4.5 Inch OD Out Tip Included. Mild Tone.

This Part Fits:

Replace the faulty or old stock catalytic converter with the all new aFe power direct-fit cat replacement. This cat replacement is constructed of mandrel-bent, 100% MIG welded stainless steel for strength and durability. This unit comes with a 49-State federal approved cat and 3/8" thick flanges for a secure hassle-free installation. This cat replacement is designed as a one piece system that retains the factory O2 sensor and hanger locations for a direct bolt-on and go solution. Stainless Steel Construction: This system is constructed of durable mandrel bent stainless steel tubing for maximum performance, corrosion resistance and strength, eliminating cracking. Factory Mounting Locations: Utilizes factory mounting locations and factory style flanges making it a true bolt-on system. Catalytic Converter: This kit comes with a 49-State federal approved catalytic converter for a bolt-on and go installation.

• Drivers Side / Front Left Converter Replacements
• 3/8 in. Thick Laser Cut Flanges
• Stainless Steel Construction
• Factory Mounting Locations
• 100% Hand MIG Welded
• Direct Fitment

This Part Fits:

The Dinan Dual Exhaust Valve Remote Kit lets you override the factory exhaust valve operation and fully open (or close) the valve at the press of a button. Directly compatible with 'F' and 'G' chassis BMW's using dual electronic valves, the Dinan Dual Exhaust Valve Remote Kit is robust in its potential applications. Once installed simply press the top button of the supplied wireless remote to open the valves fully and enjoy maximum aural pleasure. Alternatively, when the need arises for the exhaust to be as quiet as possible, press the bottom button on the remote and the valves will close.

• Extra length wiring harnesses for maximum application and routing versatility.
• Opens the factory electronic exhaust valves with the push of a button.
• Wirelessly remote controlled.
• Weatherproof housing.

This Part Fits:

Utilizing factory cut points and mounting mechanics the Dinan exhaust system is a straightforward install with precision fitment just like you would expect straight from the manufacturer. Mounting and proper fitment is where the similarities to the factory exhaust end, however. Fabricated from brushed 100% T304 stainless steel, TIG welded and free of hydroformed pipes the upgraded system is a substantial improvement from its predecessor - both in terms of material/construction as well as in overall looks. When viewed from the rear the difference becomes unmistakable if it was not already apparent. Going from the plebeian stock dual slash cut 90mm (3.5") tips to the massive Dinan straight cut 102mm (4") ones leaves no doubt that something above and beyond is present. This is solidified by the Dinan logo laser engraved on the tips and the deep growl of the exhaust that is indisputably different than anything one would expect to hear from a base 4-cylinder turbo platform.

• Dual 4" (102mm) double-walled, polished clamp-on tips with laser engraved Dinan logo
• Larger diameter piping for increased flow (85mm to dual 60mm vs. 85mm to dual 83mm)
• Drone abatement technologies used to reduce cabin resonance
• Factory-like fitment with included mounting hardware
• Maximum gains of +4 HP and +3 ft-lb of torque
• 100% 304 Stainless Steel construction
• Enjoyably louder, sportier sound
• Retains factory valve control

This Part Fits:

This full mid-section kit removes the hydro-formed factory center section, including the resonator, and replaces it with larger 3" T304 stainless steel tubing for freer flowing capabilities. In place of the factory resonator, Dinan incorporates a beautifully crafted X-pipe made from mandrel-bent tubing for minimum restriction, unlike stamped X-pipes which are commonplace in the market. This sophisticated 'X' is not only the focal point of the system in terms of aesthetics but also the star when it comes to the effects on the sound. Promoting even flow to both banks of tips, the 'X' removes unwanted nuances in sound caused by uneven exhaust flow that is found in stock systems. Along with the inherent benefit of increased volume by removal of the resonator, the Dinan Middle Exhaust for the G30 M550i produces a louder, smoother and fuller exhaust note.

• Includes X-pipe crossover made from mandrel bent tubing for minimum restriction
• Deletes resonator between catalyst and rear muffler for increased volume
• 3" (76mm) tubing replaces stock 70mm tubing for free flow
• 100% 304 stainless steel construction
• Mounting hardware included
• Smoother, sportier sound
• Bolt-on installation

This Part Fits:

Take your Chevrolet Corvette’s performance and attitude to the next level with the MBRP S7008304BT 3" Muffler Bypass Axle-Back System. Engineered for the 6.2L powerhouse, this system delivers an aggressive muscle car tone that commands attention while maintaining compatibility with your OEM AFM actuators.Crafted from durable T304 stainless steel and featuring smooth mandrel-bent tubing, this axle-back system is built for maximum flow and longevity. The kit includes four sleek black tips for a bold, finished look that matches your Corvette’s style.Installation is a breeze with a bolt-on design, so you can spend less time in the garage and more time on the road. Please note: tuning may be required.

• Durable T304 Stainless Steel Construction. Smooth Mandrel Bent tubing. Aggressive Muscle car sound. Four black tips included. Retains OEM AFM actuators. Bolt-on installation.
• Durable T304 Stainless Steel Construction
• Aggressive Muscle Car Sound
• Smooth Mandrel Bent Tubing
• Retains OEM AFM Actuators
• Four Back Tips Included
• Bolt-On Installation

This Part Fits:

THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy.The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

• Durable T304 Stainless Steel Construction. Bolt-on Installation. Smooth Mandrel Bent Tubing. Moderate Exhaust tone. Up to 74% Flow Increase. Up to 1HP and 3ft-lbs Torque Gains. 5in OD Burnt End Tips Included.
• Cat Back Performance Exhaust System

This Part Fits:

Everyone has their preference of which style of clamp is best. Some believe that the clamp they use depends on the job it has to do. Wherever you fit in this debate you'll always get what you want with our selection of high quality clamps. Get a positive seal around your pipe and muffler connections without the risk of rippling or crimping. Particularly good for situations where you may want to remove the component intact.

• Stainless Steel. Positive Seal, Without Wrinkling or Crimpling.
• Positive Seal Around Pipe And Muffler
• Without Risk Of Rippling Or Crimping

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280543. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2018-2022 BMW X3, 2017-2022 BMW 330i, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

This Part Fits:

This Part Fits:

Because Jeep enthusiast need more power from idle to 3,000 RPM, Gibson Designed their Jeep Exhaust to enhance low and mid range performance for climbing and towing. This Split Rear Exhaust exits straight out the back, with Dual Large diameter Stainless Tip. Hassle free, bolt-on installation with professional results. Backed by a Lifetime Limited Warranty.

• Baffled/Chambered Muffler; No Internal Packing
• Minimal Interior Drone - Aggressive Sound
• Polished Stainless Steel Slash-Cut Tips
• Hassle Free Easy Bolt-On Installation
• Aluminized Mandrel Bent Tubing
• Lifetime Limited Warranty
• Superflow™ Muffler

This Part Fits:

Fits 2000-2003 Ford F-250 and F-350 Super Duty (7.3L Powerstroke).

Replace your restrictive factory exhaust with this Diamond Eye 4-inch turboback system to improve exhaust flow and reduce backpressure. This single-exit kit is engineered specifically for the 7.3L Powerstroke diesel, providing a high-flow path from the turbo outlet to the tailpipe. Constructed from aluminized steel, it offers a balance of durability and value for truck owners looking to enhance performance and lower EGTs.

This versatile kit is designed to accommodate all cab and bed configurations, including Regular Cab, SuperCab, and Crew Cab models with both Short and Long beds.

• System Type: Turboback
• Main Pipe Diameter: 4-inch
• Material: Aluminized Steel
• Exit Configuration: Single Side Exit
• Engine Compatibility: 7.3L Powerstroke Diesel
• Chassis Fitment: Fits all cab and bed lengths

Fits 2004.5-2007 Dodge Ram 2500 and 3500 trucks (5.9L).

This Diamond Eye 4-inch muffler replacement pipe is engineered to eliminate the restrictive factory muffler on your Cummins-powered Dodge Ram. By swapping the bulky OE muffler for this straight-through aluminized steel section, you can effectively reduce backpressure and lower exhaust gas temperatures (EGTs) while achieving a more aggressive, deep exhaust note.

• 4-inch diameter pipe for maximum exhaust flow
• Constructed from durable aluminized steel
• Direct-fit replacement for the factory muffler section
• Designed specifically for the 2004.5 to early 2007 5.9L Cummins exhaust system

Sealing a turbocharger flange requires a gasket capable of handling extreme thermal cycling and high manifold pressures. This Cometic copper gasket is engineered specifically for T3/T4 turbo exhaust inlets, providing a reliable seal between the manifold and the turbine housing. Unlike standard paper or composite gaskets that can degrade under intense heat, the solid copper construction ensures the gasket will not burn through or push out under heavy boost.

• Designed for T3/T4 turbocharger exhaust inlet flanges
• Solid copper construction offers superior heat conductivity and durability
• Engineered to maintain a consistent torque set across different manifold and cylinder head materials
• Corrosion-resistant material prevents gasket blowout and failure in high-performance applications

Fits 2025-2026 Nissan Murano AWD models equipped with the 2.0L engine and automatic transmission.

The Borla S-Type Cat-Back Exhaust System is engineered to give your Nissan Murano a more aggressive, performance-oriented sound profile while maintaining a refined cabin environment. This system replaces the restrictive factory exhaust from the catalytic converter back, improving exhaust flow and delivering the signature S-Type (Stinger) growl that enthusiasts demand.

Designed specifically for the Murano’s 2.0L AWD configuration, this cat-back system is built to provide a deep, throaty tone during acceleration without the intrusive drone typically associated with aftermarket exhausts at highway cruising speeds. It utilizes factory-style mounting points for a direct-fit installation.

• Fits: 2025-2026 Nissan Murano (2.0L AWD Automatic)
• Series: S-Type
• System Type: Cat-Back Exhaust
• Drivetrain: All-Wheel Drive (AWD)
• Configuration: Single or Dual exit (system specific design)
• Flow Design: Mandrel-bent tubing for maximum exhaust velocity

The AWE SwitchPath Exhaust for the 2022-2026 Cadillac CT5-V Blackwing (6.2L) provides a sophisticated, dual-mode acoustic experience without sacrificing the refinement of the LT4 platform. Designed as a direct bolt-on upgrade, this system replaces the factory catback section while remaining 100 percent emissions compliant. It features integrated machined valve brackets that accept the factory actuators, allowing you to retain full control over the exhaust volume through the vehicle's stock drive mode settings.

Constructed from handcrafted, CNC mandrel-bent U.S.-sourced T304L stainless steel with a .065-inch wall thickness, this system utilizes a bespoke X-pipe to smooth out the rasp inherent to the 6.2L V8. When the valves are closed, the SwitchPath technology maintains a quiet, drone-free cabin for daily driving. When opened, the straight-through design and bullet-style resonators provide an aggressive, uncorked roar for performance use. The system is finished with quad 4.5-inch double-walled, slash-cut tips in Diamond Black.

• Direct bolt-on fitment with no cutting required
• Dual 3-inch diameter T304L stainless steel construction
• Max gains of +11 hp and +3 lb-ft of torque at the wheels
• Maintains factory ground clearance and valve functionality
• Bespoke X-pipe for a smooth, exotic exhaust note
• Includes four 4.5-inch Diamond Black slash-cut tips
• AWE Perfect Fitment and No CEL guarantees
• Proudly manufactured in-house at AWE in Pennsylvania

Fits 2014-2019 Porsche 911 GT3 and 2019 Porsche 911 Speedster models.

The Akrapovic Slip-On Race Line (Titanium) is a precision-engineered exhaust solution designed to enhance the performance and acoustic profile of Porsche’s naturally aspirated 991-platform engines. Manufactured entirely from high-grade, heat-resistant titanium, this system replaces the factory rear muffler to significantly reduce weight behind the rear axle, improving the vehicle's balance and handling. The Slip-On Race Line is specifically tuned to optimize exhaust gas flow and backpressure, providing a crisp, race-inspired exhaust note while maintaining durability under high-thermal loads.

• Proprietary high-grade titanium construction for superior strength and weight savings
• Slip-On Race Line series engineered for performance-oriented flow characteristics
• Includes a pair of signature Akrapovic titanium exhaust tips for a complete aesthetic upgrade
• Direct bolt-on fitment replaces the original factory muffler assembly
• Designed specifically for the 911 GT3 and Speedster 4.0L flat-six powerplants

Fits 2021 Porsche 911 Turbo and Turbo S (992).

The Akrapovic Slip-On Race Line is a precision-engineered exhaust upgrade designed to enhance the performance and acoustic character of the 992-generation Porsche 911 Turbo. Constructed entirely from high-grade, heat-resistant titanium, this system provides a significant weight reduction over the factory components while improving exhaust gas flow. The system is finished with distinctive handcrafted black titanium tips that integrate seamlessly with the vehicle's rear aesthetics.

• Lightweight high-grade titanium construction for durability and weight savings
• Distinctive black titanium exhaust tips with handcrafted outer sleeves
• Designed for improved exhaust flow and reduced backpressure
• Engineered as a direct replacement for the factory system using OE mounting points
• Tuned to deliver a deep, sporty exhaust note consistent with Akrapovic's Race Line heritage

Fits 2021 Porsche 911 Turbo and Turbo S (992).

The Akrapovic Slip-On Race Line (Titanium) is a precision-engineered exhaust solution designed to optimize the performance and acoustic profile of the Porsche 992 chassis. Crafted from high-grade, heat-resistant titanium, this system reduces overall vehicle weight at the rear axle, improving handling and thermal management. It serves as a direct replacement for the factory rear muffler, utilizing original mounting points for a secure, bolt-on installation.

This system delivers the signature Akrapovic sound—a deep, resonant tone that emphasizes the flat-six engine's character while maintaining cabin comfort. The assembly is completed with dual titanium tips, providing a distinct, motorsport-inspired finish that aligns perfectly with the 911 Turbo's rear fascia design.

• Brand: Akrapovic
• Series: Slip-On Race Line (Titanium)
• Material: High-grade Titanium construction
• Tips: Titanium exhaust tips included
• Compatibility: 2021 Porsche 911 Turbo / Turbo S (992)
• Installation: Replaces OE rear muffler; utilizes factory mounting points

Fits 2020 Porsche 718 Cayman GT4 and 718 Spyder.

The Akrapovic Slip-On Line (Option 2) titanium exhaust system is a precision-engineered upgrade designed to enhance the performance and acoustic signature of the Porsche 718 platform. Constructed entirely from high-grade, lightweight titanium, this system replaces the heavy factory rear mufflers to reduce weight behind the rear axle and optimize exhaust gas flow. This specific Option 2 variant features a pair of distinctive black-coated titanium tips, providing a unique visual finish that complements the aggressive rear styling of the GT4 and Spyder.

• High-grade titanium construction for maximum weight savings and durability
• Precision-manufactured black coated titanium exhaust tips
• Direct bolt-on "Slip-On Line" design for streamlined installation
• Engineered to reduce back-pressure and improve exhaust note
• Manufacturer Reference: Option 2