Maintain the integrity of your high-pressure fuel system with this high-efficiency replacement fuel filter designed for PureFlow AirDog and AirDog II systems. This filter is engineered to capture contaminants down to 2 microns, providing the critical protection necessary for common-rail injectors and high-pressure fuel pumps where microscopic debris can lead to premature component failure.

• Filtration Rating: 2-micron efficiency for maximum fuel purity.
• Direct Compatibility: Fits standard AirDog and AirDog II fuel air separation systems.
• Installation: Spin-on canister design allows for quick, tool-free filter changes during routine maintenance.
• Protection: Helps prevent injector clogging and fuel system wear by removing fine particulates from the fuel stream.

Maintain the integrity of your diesel fuel system with this PureFlow replacement water separator filter, specifically engineered for AirDog and AirDog II fuel air separation systems. As the primary line of defense, this filter is designed to trap water and large contaminants before they can reach your secondary fuel filter or sensitive high-pressure injection components.

• Direct replacement for the primary water separator on AirDog and AirDog II systems
• Effective moisture removal to prevent corrosion and cavitation in fuel injectors
• Protects high-pressure common rail (HPCR) components from water-related damage
• Spin-on design for straightforward maintenance and filter changes

Regular replacement of the water separator is essential for ensuring the longevity of your lift pump and the overall efficiency of your engine's combustion process. This filter provides the precise fit and sealing required to maintain system pressure without leaks.

Fits 2006-2016 Chevrolet Silverado and GMC Sierra models equipped with the 6.6L Duramax diesel engine.

Ensure reliable ignition and efficient cold-weather starts with PureFlow DieselRX 12V glow plugs. Designed to meet or exceed OE specifications, these glow plugs are a direct replacement for worn or fouled factory units, addressing common hard-starting issues and reducing the excessive strain placed on your battery and starter during cold cycles. Engineered to withstand the extreme thermal environment and high-pressure combustion of the Duramax engine, the DRX00057 provides consistent pre-heating for a smoother idle and reduced exhaust emissions during the warm-up phase.

• Direct OE replacement for 2006-2016 6.6L Duramax engines
• Operating Voltage: 12V
• Precision-engineered for rapid heat-up and long-term durability
• Critical for maintaining engine health in freezing temperatures
• Manufacturer Part Number: DRX00057

The PureFlow Raptor VP-150 (R1SBU371) is a high-volume universal fuel pump engineered for performance applications requiring consistent, high-pressure fuel delivery. Rated at 150 gallons per hour (GPH), this pump provides the necessary flow to support modified engines that have outgrown the capacity of stock lift pumps.

Equipped with a built-in adjustable pressure regulator, the Raptor VP-150 allows for precise fuel pressure tuning without requiring a return line back to the tank. Its high-efficiency gerotor design offers quiet operation and enhanced longevity. This universal kit provides a versatile solution for custom fuel system builds or as a heavy-duty replacement for failing OE components.

• Flow Rate: 150 GPH (Gallons Per Hour)
• Integrated Regulator: Built-in adjustable pressure relief valve
• Construction: Durable gerotor design for consistent flow
• Installation: Universal mounting bracket and hardware included
• Manufacturer Part Number: R1SBU371

Fits 2003-2004.5 Dodge Ram 2500 and 3500 trucks equipped with the 24V 5.9L Cummins diesel engine.

The PureFlow Raptor R4SBD324 fuel pump is a high-performance lift pump upgrade designed to provide consistent, high-volume fuel delivery to the injection pump. Built with a durable gerotor design, this pump is engineered to eliminate fuel starvation and maintain stable pressure even under heavy load or performance applications. It serves as a robust replacement for the factory lift pump, which is a known weak point on early third-generation Cummins engines.

• Direct-fit installation for 2003 to 2004.5 model years
• High-flow gerotor pump design for increased longevity
• Adjustable fuel pressure regulator for precise tuning
• Helps protect the VP44/CP3 injection pump from cavitation
• Manufacturer Part Number: R4SBD324

Fits 2011-2014 Chevrolet Silverado models equipped with the 6.6L Duramax diesel engine.

The PureFlow Raptor 4G (RP-4G-100) fuel pump is engineered to provide the consistent, high-volume fuel delivery required by modified diesel engines. This gerotor pump system overcomes the limitations of the factory fuel delivery, ensuring your injection system receives steady pressure even under heavy load or high-performance demands. By maintaining optimal fuel flow, the Raptor 4G helps protect expensive fuel system components from cavitation and starvation.

• Manufacturer Part Number: R4SBC134
• Series: Raptor 4G (RP-4G-100)
• Application: 2011-2014 Chevrolet 6.6L Duramax
• Pump Type: High-flow gerotor
• Mounting: Includes frame-mounting hardware and brackets
• Design: Built-in adjustable pressure regulator

Fits 2001-2010 Chevrolet models equipped with the 6.6L Duramax diesel engine.

The PureFlow Raptor 4G fuel pump (R4SBC133) is a high-performance diesel lift pump engineered to provide consistent, reliable fuel delivery. By replacing the restrictive factory components, the Raptor 4G ensures your fuel system meets the demands of both stock and modified engines, preventing fuel starvation during heavy towing or high-performance applications. Its gerotor design offers quiet operation and durability for long-term use in heavy-duty environments.

• Adjustable Pressure: Features a built-in adjustable pressure regulator, allowing for precise fuel system tuning.
• High-Flow Capacity: Designed to maintain optimal fuel volume and pressure, supporting increased horsepower and torque.
• Direct Replacement: Built to integrate with the factory fuel system, improving overall engine efficiency and responsiveness.
• Heavy-Duty Construction: Manufactured with materials selected for compatibility with modern diesel fuels and additives.
• MPN: R4SBC133

Fits Case/IH tractor models 460, 504, 560, 656, 660, 706, 2504, 2656, and 2706.

Restore reliable cold-starting performance to your Case/IH diesel engine with PureFlow DieselRX glow plugs. These heavy-duty components are engineered to withstand the extreme thermal cycles of agricultural operations, ensuring rapid combustion chamber pre-heating even in freezing conditions. By providing consistent, concentrated heat, they significantly reduce cranking time, which helps minimize wear on your starter motor and battery during winter months.

These DieselRX glow plugs are manufactured to meet or exceed original equipment specifications, providing a direct-fit solution for maintaining your tractor’s utility and performance.

• Direct-fit replacement for Case/IH agricultural diesel engines
• Designed for rapid heat-up and high-temperature durability
• Helps ensure smooth ignition in cold-weather conditions
• Manufacturer Part Number: DRX00017

Fits 2008-2010 Ford trucks with the 6.4L Powerstroke diesel engine.

The PureFlow AirDog II-5G DF-100-5G is a high-performance fuel air separation system designed to provide your 6.4L Powerstroke with a consistent, air-free fuel supply. By removing entrained air, water, and debris from the diesel fuel, this system helps protect high-pressure fuel components and improves overall engine efficiency. The 5G series features a demand flow regulator, allowing the system to recirculate fuel internally and reduce load on the pump motor for quieter operation and a longer lifespan.

• Removes air and vapor from diesel fuel to improve injector longevity and throttle response
• Integrated demand flow regulator adjusts to engine requirements
• High-efficiency filtration removes water and particulate contaminants
• Includes installation hardware and bracketry for the 6.4L Powerstroke platform
• Manufacturer Part Number: A7SPBF266
• Model Number: DF-100-5G

The PureFlow AirDog II-5G DF-100-5G is an advanced fuel air separation system designed for 2004.5-2024 Dodge Ram trucks equipped with the 6.7L Cummins engine. This system addresses the inherent limitations of factory fuel delivery by removing entrained air, water, and debris before they reach the injection pump and injectors. By delivering pure, pressurized fuel, the AirDog II-5G protects critical high-pressure fuel system components from cavitation and wear while ensuring consistent engine performance.

Built on the 5G platform, this lift pump utilizes a demand-flow design that adjusts fuel delivery based on engine requirements, reducing unnecessary recirculation and extending pump life. The compact, frame-mounted assembly provides a significant filtration upgrade over stock components, maintaining fuel pressure under various load conditions.

• Fits 2004.5-2024 Dodge Ram (6.7L Cummins Diesel)
• Removes entrained air, water, and contaminants from diesel fuel
• Maintains consistent fuel pressure to the injection pump
• Demand-flow design reduces pump wear and power consumption
• Includes installation kit with mounting brackets and hardware
• Model: AirDog II-5G (DF-100-5G)
• Manufacturer Part Number: A7SPBD254

Fits 1989-1993 Dodge Ram trucks equipped with the 12V 5.9L Cummins diesel engine.

The PureFlow AirDog II-5G DF-165-5G is a high-performance fuel air separation system engineered to deliver purified, air-free fuel to your 12V Cummins at a consistent pressure. By removing entrained air, water, and debris from the diesel supply, this system prevents cavitation and protects critical fuel injection components from premature wear while improving combustion efficiency.

This Fifth Generation (5G) unit utilizes a demand-flow design, which allows the pump to only process the amount of fuel required by the engine. This reduces unnecessary fuel recirculation, resulting in quieter operation and a longer service life for the pump motor. The integrated adjustable regulator allows for precise fuel pressure tuning to match your specific performance requirements.

• Removes air, vapor, and water from diesel fuel to improve injection timing
• Reduces pump cavitation for quieter engine operation and better throttle response
• Demand-flow technology reduces motor wear and heat soak
• Adjustable pressure regulator for precise fuel delivery
• Includes complete installation kit with wiring harness and mounting hardware

• Manufacturer Part Number: A7SABD540
• Model Number: DF-165-5G
• Series: AirDog II-5G
• Flow Rating: 165 GPH

Fits 1994-1998 Dodge Ram trucks equipped with the 5.9L 12V Cummins diesel engine.

The PureFlow AirDog II-5G DF-165-5G is a high-performance fuel air separation system engineered to provide purified, high-pressure fuel to your Cummins injection system. This 5th-generation (5G) system utilizes a demand-flow design, ensuring the injection pump receives the exact volume of fuel required without unnecessary recirculation. By stripping entrained air, water, and particulates from the diesel fuel, it protects sensitive fuel system components and improves engine efficiency.

• Flow Rating: 165 GPH
• 5G quiet motor technology significantly reduces operating noise
• Demand-flow design only moves the fuel the engine requires
• Adjustable pressure regulator for precise fuel system tuning
• Integrated water separator and fuel filter
• Improves throttle response and extends injector service life
• Includes complete installation kit and mounting hardware
• Manufacturer Part Number: A7SABD524

Fits 2019-2020 RAM trucks equipped with the 6.7L Cummins engine.

The PureFlow AirDog II-5G Fuel Air Separation System (A7SABD427) represents the next evolution in diesel fuel delivery for the 6.7L Cummins. As a Demand Flow system, this DF-165-5G unit is engineered to provide a consistent, high-volume flow of purified fuel to your injection pump by effectively removing entrained air, water, and vapor. Removing these contaminants helps protect your high-pressure fuel system, improves throttle response, and ensures your engine receives only pure diesel at the correct pressure.

Built on the 5G platform, this system features a compact and efficient design that integrates seamlessly with your RAM's fuel architecture, providing the reliability required for both heavy towing and performance applications.

• Eliminates entrained air and vapor from diesel fuel
• Provides positive fuel pressure to the injection pump
• Extends the service life of expensive fuel injectors
• Demand Flow design for efficient fuel delivery
• Includes fuel filtration and water separation components
• Manufacturer Part Number: A7SABD427

Fits 2011-2014 Chevrolet trucks equipped with the 6.6L Duramax diesel engine.

The PureFlow AirDog II-5G Fuel Air Separation System is a critical upgrade for your 6.6L Duramax, designed to protect sensitive fuel system components by removing entrained air, water, and debris. By delivering pure, pressurized fuel to the engine, it prevents injector cavitation and protects the high-pressure fuel pump from premature wear. This system ensures consistent fuel pressure and flow under all driving conditions, from daily commuting to heavy towing.

The 5G series features a demand-flow design, allowing the system to provide only the amount of fuel the engine requires, which reduces fuel heating and improves overall efficiency. The unit is built with a quiet, high-efficiency motor and an adjustable pressure regulator, allowing for precise tuning to your specific vehicle needs.

• Removes air, water, and particulates from diesel fuel for improved combustion
• Protects fuel injectors and high-pressure pumps from cavitation and debris
• Demand-flow technology prevents excessive fuel heating
• Adjustable pressure regulator for customized fuel delivery
• Includes complete installation hardware and integrated fuel filter/water separator
• Manufacturer Part Number: A7SABC514

Fits 2008-2010 Ford trucks equipped with the 6.4L Powerstroke diesel engine.

The PureFlow AirDog FP-100-4G Fuel Air Separation System is engineered to protect your 6.4L Powerstroke injection system by removing entrained air, water, and debris from the diesel fuel. By delivering pure fuel to the engine, this system helps maintain consistent fuel pressure, improves throttle response, and extends the service life of high-pressure fuel components.

• Removes air, water, and particulates to ensure cleaner combustion
• Utilizes AirDog 4G motor technology for quiet and reliable operation
• Helps improve fuel economy and engine idle quality
• Complete kit includes mounting hardware and fuel lines
• Manufacturer Part Number: A4SPBF070

Fits 1989-1993 Dodge trucks with the 12V 5.9L Cummins engine.

The PureFlow AirDog II-4G Fuel Air Separation System (A4SPBD137) is a high-performance fuel delivery and filtration upgrade designed specifically for the 12V Cummins. This system solves the inherent issues of air and vapor in diesel fuel, which can cause erratic timing and premature wear on the injection pump. By delivering 150 GPH of purified, air-free fuel at a consistent pressure, the AirDog II-4G ensures your engine maintains peak efficiency and throttle response under heavy loads.

• 4G motor technology provides quiet operation and long-term durability
• 150 GPH flow rate supports both stock and modified fuel demands
• Dual-filter design removes air, vapor, water, and particulates down to 2 microns
• Protects expensive fuel system components from cavitation and contamination
• Complete kit includes mounting hardware, wiring harness, and fuel lines
• Manufacturer Part Number: A4SPBD137

Fits 2003-2007 Ford Powerstroke (6.0L) diesel trucks.

The PureFlow Raptor RP-4G-150HP fuel pump is a high-performance 4G series lift pump engineered to provide consistent, high-volume fuel delivery to the Ford 6.0L Powerstroke engine. This unit addresses the common limitations of the factory fuel system by ensuring your injectors receive a steady supply of fuel under pressure, which is vital for maintaining performance and preventing injector damage caused by fuel starvation or cavitation.

• Features a Gerotor design for quiet, efficient operation and extended service life
• Built-in adjustable pressure regulator allows for fine-tuning fuel delivery to your specific setup
• Engineered to bypass the restrictive factory pump for improved flow characteristics
• Direct-fit design mounts to the vehicle frame with included hardware for a professional installation
• Manufacturer Part Number: R4SPBF358

Fits 1999-2003 Ford F-250/F-350 and Excursion models (7.3L).

The PureFlow Raptor RP-4G-150HP is a high-performance 4G series lift pump designed to solve fuel starvation issues on the 7.3L Powerstroke. This pump delivers 150 GPH (Gallons Per Hour), providing a steady, high-volume fuel supply to support factory or modified injectors. Unlike standard pumps, the Raptor features a built-in adjustable pressure regulator, allowing you to fine-tune the fuel pressure to meet your engine's specific requirements without the need for a separate return line.

Engineered for durability and quiet operation, this system utilizes a Gerotor design and a high-efficiency motor. The Raptor R4SPBF357 is a critical upgrade for diesel owners looking to improve throttle response and maintain consistent rail pressure under heavy load or towing conditions.

• Flow Rate: 150 GPH for high-demand fueling
• Adjustable pressure regulator for precise tuning
• Gerotor design for quiet, long-lasting performance
• Complete installation kit with mounting bracket and hardware
• Manufacturer Part Number: R4SPBF357

Fits 2003-2004.5 Dodge Ram 2500 and 3500 trucks (5.9L) originally equipped with or converted to an in-tank fuel pump.

The PureFlow Raptor fuel pump provides the consistent, high-volume fuel delivery your 5.9L Cummins engine requires for long-term reliability and performance. This high-flow lift pump utilizes a proven gerotor design to provide superior durability over the factory unit, which is prone to failure under load. Engineered specifically for Dodge trucks with the lift pump located inside the fuel tank, this kit ensures proper fuel system integration and optimal pressure regulation.

• High-flow gerotor pump design for consistent, reliable fuel delivery
• Adjustable fuel pressure to meet specific engine requirements
• Simplified installation with no external return line required
• Designed to bypass or replace the failure-prone factory lift pump
• Manufacturer Part Number: R4SBD356

Fits 1998.5-2002 Dodge Ram 2500 and 3500 trucks (5.9L) equipped with an in-tank fuel pump conversion.

The PureFlow Raptor 4G RP-4G-100 lift pump is a high-performance fuel delivery solution designed to protect the sensitive VP44 injection pump on the 24V Cummins engine. By providing a steady, reliable supply of fuel, this gerotor-style pump prevents the fuel starvation issues common with stock lift pumps. This specific kit, R4SBD355, is engineered for vehicles that have already been converted to an in-tank pump configuration, ensuring proper integration with your existing setup.

• Manufacturer Part Number: R4SBD355
• Series: Raptor 4G (RP-4G-100)
• Built-in adjustable pressure regulator for precise fuel tuning
• Gerotor design for quiet operation and long-term durability
• Mounts to the vehicle frame for easy accessibility and cooling
• Eliminates the restriction of the factory fuel supply system
• Includes necessary mounting hardware and fuel lines

The PureFlow Raptor RP-4G-150 Fuel Pump is engineered as a robust replacement and upgrade for the factory fuel system on 2003-2004.5 Dodge Ram trucks equipped with the 24V 5.9L Cummins diesel engine.

This aftermarket fuel pump is designed to provide consistent, reliable fuel pressure to the injection pump, a critical factor for the longevity and performance of your Cummins engine. The original equipment lift pump on these applications can be prone to failure, leading to insufficient fuel supply and potential damage to the costly VP44 or CP3 injection pump. The Raptor pump helps prevent these issues by maintaining steady fuel pressure under various operating conditions.

• Direct fit for 2003-2004.5 Dodge Ram 24V 5.9L Cummins diesel trucks
• Ensures consistent fuel pressure to the injection pump
• Designed for enhanced reliability and fuel system protection
• Manufacturer Part Number: R4SBD325

Fits 2005-2018 Dodge 24V Cummins trucks (5.9L / 6.7L).

The PureFlow Raptor RP-4G-150 Fuel Pump provides a reliable, high-flow fuel delivery solution for 2005-2018 Dodge Cummins owners. As part of the Raptor 4G series, this lift pump is designed to support the fueling demands of both 5.9L and 6.7L diesel engines, ensuring consistent volume and pressure to the injection system. It serves as a critical upgrade for maintaining optimal performance and protecting your high-pressure fuel system from starvation under load.

• Manufacturer Part Number: R4SBD053
• Series: Raptor RP-4G-150
• Application: Fuel lift pump system
• Engine Compatibility: 24V Cummins 5.9L and 6.7L Diesel
• Vehicle Range: 2005-2018 Dodge Ram

This PureFlow Raptor RP-4G-150 Fuel Pump (MPN: R4SBD052) is engineered for 1998.5-2002 Dodge Ram trucks equipped with the 24V 5.9L Cummins diesel engine. It serves as a direct replacement or performance upgrade for the factory lift pump, ensuring consistent fuel delivery and pressure to the injection system.

Proper fuel pressure is critical for the longevity and optimal performance of your Cummins engine, especially under demanding conditions or with performance modifications. The Raptor series fuel pump is designed to provide reliable, stable fuel flow to prevent common issues associated with failing stock pumps, such as hard starts, reduced power, and potential damage to the injection pump.

• Direct fit for 1998.5-2002 Dodge Ram 2500/3500 24V 5.9L Cummins
• Ensures consistent fuel pressure and flow
• Replaces or upgrades original equipment fuel pump
• Manufacturer Part Number: R4SBD052

Fits 1994-1998 Dodge Ram 2500 and 3500 models equipped with the 12-valve (5.9L) Cummins engine.

The PureFlow AirDog Raptor 4G fuel pump provides the consistent fuel pressure and volume required for modified 12V Cummins engines. Utilizing a high-efficiency gerotor design, this pump delivers 150 GPH (Gallons Per Hour) to ensure your P-pump receives adequate fueling even under heavy load or high-performance conditions. This unit replaces the restrictive factory mechanical lift pump and features a built-in adjustable pressure regulator for precise fuel delivery control.

• Flow Rate: 150 GPH
• Pump Design: Durable, quiet gerotor technology
• Adjustable pressure regulator for custom fuel tuning
• Mounts directly to the vehicle frame rail
• Replaces factory mechanical lift pump
• Manufacturer Part Number: R4SBD051
• Series: Raptor 4G RP-4G-150

Fits select 2005-2018 Dodge trucks equipped with 24V 5.9L or 6.7L Cummins diesel engines.

The PureFlow Raptor RP-4G-100 fuel pump, manufacturer part number R4SBD050, is a high-performance lift pump upgrade designed to deliver a consistent, high-volume fuel supply to your Cummins injection system. By replacing the restrictive factory pump, the Raptor 4G series ensures your engine maintains optimal fuel pressure even under heavy load or during performance-oriented driving, protecting critical fuel system components from starvation.

• Product Series: Raptor 4G
• Model: RP-4G-100
• Manufacturer Part Number: R4SBD050
• Engine Fitment: 24V 5.9L and 6.7L Cummins Diesel
• Vehicle Compatibility: 2005-2018 Dodge Ram Models
• Installation: Replaces or supplements factory lift pump for improved fuel delivery

Fits 1998.5-2002 Dodge Ram (5.9L).

The PureFlow Raptor 4G RP-4G-100 (MPN: R4SBD049) is a high-performance fuel lift pump designed to overcome the fuel delivery limitations of the factory system on 24-valve Cummins engines. By providing a consistent, high-volume fuel supply to the VP44 injection pump, the Raptor 4G helps prevent fuel starvation, a common cause of premature injection pump failure.

• High-flow gerotor design provides reliable, consistent fuel delivery
• Built-in adjustable pressure regulator allows you to fine-tune system pressure
• Helps protect the VP44 injection pump from damage caused by low fuel pressure
• Designed for straightforward installation with included mounting hardware
• Includes manufacturer part number: R4SBD049

The PureFlow Raptor RP-4G-100 Fuel Pump is engineered to provide consistent and reliable fuel delivery for 1994-1998 Dodge Ram trucks equipped with the 5.9L Cummins engine. This direct-replacement pump addresses common fueling limitations of the factory system, ensuring your engine receives an adequate supply of fuel under all operating conditions.

Whether you're running a stock setup or have introduced performance modifications, the Raptor RP-4G-100 maintains optimal fuel pressure and flow, which is crucial for engine longevity and performance. It installs directly to existing mounting points, simplifying the upgrade process.

• Ensures consistent fuel pressure and flow
• Direct fit replacement for factory lift pump
• Supports both stock and modified 5.9L Cummins engines
• Manufacturer Part Number: R4SBD048

Fits 2015-2016 Chevrolet models equipped with the 6.6L Duramax diesel engine.

The PureFlow Raptor 4G (R4SBC138) fuel lift pump is an essential upgrade for diesel owners looking to improve fuel system reliability and performance. This 4G series pump utilizes a Gerotor design to deliver high-volume fuel flow under positive pressure, significantly reducing the vacuum stress on your engine's high-pressure injection pump. By ensuring a steady fuel supply, the Raptor 4G helps prevent cavitation and maintains consistent rail pressure during heavy towing or high-load conditions.

Engineered for durability and ease of maintenance, this lift pump features an adjustable pressure regulator, allowing you to fine-tune the fuel delivery to your specific setup. The unit mounts securely to the vehicle frame and is built to withstand the rigors of daily driving and heavy-duty use.

• Manufacturer Part Number: R4SBC138
• Engine Fitment: 6.6L Duramax Diesel
• Pump Design: High-flow Gerotor system
• Features: Built-in adjustable pressure regulator
• Mounting: Frame-mount configuration with included hardware

This PureFlow Raptor RP-4G-150 Fuel Pump is engineered for direct fitment on 2001-2010 Chevrolet 6.6L Duramax (V8) models.

The PureFlow Raptor RP-4G-150 is a robust diesel fuel pump designed to replace or upgrade the factory lift pump on your 6.6L Duramax engine. It provides consistent, high-volume fuel delivery to the injection pump, a crucial factor for maintaining optimal engine performance and reliability, especially in modified or high-demand applications. By preventing fuel cavitation and ensuring steady pressure, this pump helps protect critical fuel system components and promotes more consistent throttle response.

• Ensures consistent and reliable fuel pressure and flow
• Helps prevent fuel cavitation, enhancing system longevity
• Designed for direct-fit installation on compatible Duramax vehicles
• Manufacturer Part Number: R4SBC136

Fits 1992-2000 Chevrolet models equipped with the 6.5L Diesel engine.

The PureFlow Raptor 4G RP-4G-100 is a high-performance fuel pump designed to optimize fuel delivery for your 6.5L diesel engine. This Raptor series pump provides consistent fuel flow, replacing the restrictive factory lift pump to ensure your fuel system maintains steady pressure under various driving conditions. It is engineered for durability and reliability, making it an essential upgrade for maintaining the health of your 6.5L Detroit Diesel fueling system.

• Manufacturer Part Number: R4SBC132
• Product Line: Raptor 4G (RP-4G-100)
• Direct fit for 1992-2000 Chevrolet (6.5L Diesel)
• Designed for improved fuel flow and system reliability
• High-quality construction for long-term performance