Fits select 2004-2014 Subaru WRX, Forester, Legacy GT, Outback, and Baja models. This Competition Clutch Stage 2 – 2100 Series Rebuild Kit is engineered for aggressive street driving and moderate track duty. It delivers up to an 80% increase in torque capacity over stock, making it a critical upgrade for vehicles with increased power output. The kit features a high-torque sprung disc with anti-burst steel-backed Brass Plus facings, ensuring smooth engagement and significantly extended service life compared to standard friction materials.

• Increases torque capacity by up to 80%
• Ideal for aggressive street use and moderate track applications
• Alloy-backed Brass Plus material for superior heat dissipation and durability
• High-torque sprung disc design for reduced vibration and drivetrain shock
• Manufacturer Part Number: 15026-RK-2100

Kit Includes: Performance pressure plate, high-torque sprung disc with anti-burst steel-backed Brass Plus facings, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.

Fits 1992-1993 Acura Integra GS, GS-R, LS, and RS models.

The Competition Clutch Stage 4 Strip Series 1620 clutch kit is engineered for high-horsepower applications requiring aggressive engagement and significantly increased holding power. This kit provides up to a 250% increase in torque capacity over the factory setup, making it an ideal choice for forced induction or heavily modified naturally aspirated builds that see frequent track use.

At the center of the kit is a six-puck high-torque sprung disc featuring ceramic buttons. The sprung-hub design helps dampen drivetrain shock during rapid engagement, while the ceramic friction material provides the heat resistance and bite necessary for penetrating engagement. Each kit includes a performance-grade pressure plate designed for increased clamp load without excessive pedal effort.

• Manufacturer Part Number: 8027-1620
• Series: Stage 4 Strip Series 1620
• Torque Capacity: Up to 250% over OE
• Disc Style: 6-puck sprung hub with ceramic buttons
• Includes: Performance pressure plate, 6-puck ceramic disc, throw-out bearing, pilot bearing/bushing, and alignment tool

Fits 2002-2006 Acura RSX Type-S.

This Competition Clutch custom throw out bearing (release bearing) is specifically engineered for use with Competition Clutch Twin and Triple Disc performance clutch kits. Designed to meet the precise clearance and travel requirements of multi-disc setups, this bearing replaces the standard unit to ensure consistent engagement and long-term durability in high-performance applications.

• Manufacturer Part Number: 5-0837
• Application: Specifically for Twin and Triple Disc clutch kits
• Direct replacement for worn multi-disc release bearings
• Maintains factory-like pedal feel and engagement geometry

Fits select 1988-1991 Acura Integra and Honda CRX models (GS, LS, RS, Base, DX, HF, Si).

The Competition Clutch Stage 2 Street Series 2100 Clutch Kit is engineered for drivers requiring a significant upgrade over stock components without sacrificing daily drivability. This kit provides an approximate 80% increase in torque capacity, making it an ideal solution for aggressive street use and moderate track applications. The heart of the kit is the Brass Plus friction material with a steel-backed alloy lining, which facilitates smooth, chatter-free engagement and excellent thermal stability for an extended service life.

• Torque Capacity: Up to 80% increase over OEM
• Disc Material: High-torque sprung disc with anti-burst steel-backed Brass Plus facings
• Pressure Plate: High-performance unit designed for increased clamping force
• Manufacturer Part Number: 8017-2100
• Kit Contents: Performance pressure plate, sprung friction disc, throw-out bearing, pilot bearing/bushing (where applicable), and alignment tool

Fits 1986-2000 Acura Integra and Honda Civic, CRX, and del Sol models. This Competition Clutch Ultra Lightweight Steel Flywheel is specifically engineered for enthusiasts performing a D2B swap, allowing for the use of a B-Series transmission with a D-Series engine.

Manufactured from high-grade 4140 forged steel, the 2-694D-ST features a robust one-piece design that offers significantly higher safety and durability than cast or multi-piece flywheels. While providing quicker throttle response and faster revs, this steel flywheel is weighted to preserve the low-end torque and driveability required for street use and naturally aspirated builds. It is an ideal match for Stage 1 or Stage 2 performance clutch applications.

• Specifically designed for D2B engine-to-transmission swap applications
• Forged 4140 steel construction for maximum strength and safety
• One-piece design eliminates the risk of ring gear separation
• Optimized weight preserves low-end torque for street driveability
• Compatible with D15, D16, and D17 engine configurations in D2B setups
• Manufacturer Part Number: 2-694D-ST

Fits 2013-2017 Ford Focus ST. This Stage 4 replacement clutch disc from Competition Clutch is designed specifically for vehicles already equipped with the 7248-1620 clutch system. It serves as a direct replacement component, allowing you to restore drivetrain performance without the need to purchase a complete new clutch kit.

Engineered for high-performance use, this disc features ceramic friction material designed to handle the increased torque loads and heat generated by modified engines. This is the disc only and is intended for use as a service part for existing Competition Clutch Stage 4 assemblies.

• Product Line: Stage 4
• Material: High-torque ceramic friction
• Direct replacement for disc included in kit 7248-1620
• Manufacturer Part Number: 387248-1620

Ensure reliable clutch engagement and smooth shifting with the Competition Clutch FRK-5048 Clutch Fork. Fits select 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 models. This fork is a critical replacement for worn, bent, or fatigued factory units that often lead to inconsistent pedal feel or gear lockout.

Engineered to withstand the increased leverage and stress associated with high-performance pressure plates, the FRK-5048 restores the mechanical geometry required for precise throw-out bearing operation. It is a vital component for any transmission overhaul or clutch replacement on the DSM platform.

• Direct-fit replacement for the original equipment clutch fork
• Durable construction capable of managing higher clamp loads
• Helps prevent clutch drag and difficult gear synchronization
• Manufacturer Part Number: FRK-5048

Vehicle Fitment:

• 1990-1998 Eagle Talon TSi
• 1990-1994 Mitsubishi Eclipse GS
• 1990-1999 Mitsubishi Eclipse GST
• 1990-1999 Mitsubishi Eclipse GSX
• 1996-1999 Mitsubishi Eclipse Spyder GST
• 1991-1992 Mitsubishi Galant VR-4
• 1990-1994 Plymouth Laser RS

Fits 2004-2011 Mazda RX-8 models across all trims including Base, R3, Shinka, and Sport.

When upgrading to a performance lightweight flywheel on the Renesis rotary engine, maintaining the proper balance of the rotating assembly is critical. This Competition Clutch Counterweight Kit is engineered to provide the necessary external balance required for aftermarket flywheel installations, ensuring smooth operation and preventing engine vibration. This kit is suitable for both naturally aspirated and turbocharged applications.

• Required for use with lightweight flywheel upgrades on Mazda rotary engines
• Compatible with 2004-2011 Mazda RX-8 (Turbo and Non-Turbo)
• Includes necessary mounting hardware for a secure installation
• Precision-manufactured for exact balance specifications
• Manufacturer Part Number: CW-MZD-03

Fits 1986-1988 Mazda RX-7 models including Turbo, GXL, Base, SE, and 10th Anniversary trims.

The Competition Clutch CW-MZD-02 Counterweight Kit is a necessary component for 13B rotary engines when upgrading to a lightweight aftermarket flywheel. Because the factory flywheel often carries the rear engine balance, installing a performance aluminum or chromoly flywheel requires this separate counterweight to be mounted to the eccentric shaft. This kit ensures your rotating assembly remains properly balanced to prevent engine vibration and premature bearing wear.

• Compatible with both Turbo and Non-Turbo (NA) 1986-1988 Mazda RX-7 (FC) applications
• Essential for use with lightweight performance flywheels
• Precision machined for accurate rotational balance
• Includes all necessary mounting bolts for a complete installation
• Manufacturer Part Number: CW-MZD-02

Fits 1989-1995 Mazda RX-7 models (Turbo and Non-Turbo).

When upgrading to a lightweight performance flywheel on a rotary engine, maintaining proper rotating assembly balance is critical. The Competition Clutch CW-MZD-01 Counterweight Kit provides the necessary offset weight to ensure smooth engine operation and longevity after removing the factory flywheel. This kit is a required component for most aftermarket lightweight flywheel installations on second-generation (FC) and third-generation (FD) RX-7s.

• Required for installing lightweight flywheels on rotary engines
• Ensures correct engine balance for the rotating assembly
• Includes high-strength mounting hardware for secure installation
• Compatible with both Turbo and Non-Turbo applications
• Manufacturer Part Number: CW-MZD-01

Fitment Applications:

• 1991, 1993-1995 Mazda RX-7 Base
• 1989-1991 Mazda RX-7 Convertible
• 1989-1990 Mazda RX-7 GTU / GTUs
• 1989-1990 Mazda RX-7 GXL / GXL 2+2
• 1993 Mazda RX-7 R1
• 1994-1995 Mazda RX-7 R2
• 1993-1995 Mazda RX-7 Touring
• 1989-1991 Mazda RX-7 Turbo

Fits select 2007-2017 Nissan 350Z and 370Z, and 2007-2013 Infiniti G35 and G37 models. This Competition Clutch nodular iron flywheel offers a high-strength, cost-effective alternative to the labor-intensive process of resurfacing a worn factory flywheel. Designed as a direct bolt-in unit, this single mass flywheel (SMF) provides superior durability compared to standard OEM components, making it an essential upgrade during any clutch service.

Constructed from high-grade nodular iron, this unit is engineered to withstand the thermal and mechanical stresses of performance driving while maintaining smooth engagement. By replacing a damaged or heat-checked factory unit with this precision-manufactured component, you ensure a flat, true friction surface for your new clutch kit to maximize torque transfer and longevity.

• Material: High-strength nodular iron
• Weight: 25.3 lbs
• Design: Single Mass Flywheel (SMF)
• Fitment Type: Direct bolt-in OE replacement
• Manufacturer Part Number: BD-06073-115

Fits select 2003-2007 Nissan 350Z and Infiniti G35 models.

This Competition Clutch single-mass flywheel (SMF) is engineered as a high-strength, direct bolt-in replacement for the factory unit. Manufactured from nodular iron, this flywheel offers significantly higher tensile strength than standard cast iron alternatives, providing a durable foundation for your driveline. Rather than risking the inconsistencies of resurfacing a worn OE flywheel during a clutch service, this 25.6lb unit ensures a clean, flat mating surface for optimal engagement and longevity.

• Manufacturer Part Number: BD-06072-116
• Material: High-strength Nodular Iron
• Type: Single Mass Flywheel (SMF)
• Weight: 25.6 lbs
• Installation: Direct bolt-in; replaces factory flywheel

Fits 1992-1993 Acura Integra (1.7L).

This Competition Clutch ceramic six-puck sprung disc (MPN 99785-1620) is designed specifically as a replacement component for Competition Clutch assemblies. Engineered for high-performance applications that demand increased torque capacity and aggressive engagement, the six-puck configuration provides improved heat dissipation compared to full-face discs.

The ceramic friction material offers a high coefficient of friction for reliable grab under heavy load, while the sprung hub design helps dampen driveline vibrations and reduces shock during engagement, making it more manageable for street-driven performance vehicles.

• Replacement ceramic six-puck clutch disc
• Sprung hub for vibration damping and smoother engagement
• High-torque ceramic friction material
• Designed for use with Competition Clutch components
• Manufacturer Part Number: 99785-1620

Fits 2002-2005 Subaru WRX.

Maintain the performance and power transfer of your drivetrain with this Competition Clutch Replacement Clutch Disc. This disc is specifically engineered for use with Competition Clutch components, offering a cost-effective solution for refreshing your clutch system when the friction material has reached its service limit but the pressure plate and flywheel remain in good condition.

• Direct replacement disc designed for Competition Clutch assemblies
• Precision manufactured to ensure consistent engagement and torque capacity
• High-quality friction material for reliable performance in street or track conditions
• Manufacturer Part Number: 99740-S

Please note that this replacement disc is designed to be compatible with Competition Clutch kits and may not be compatible with OEM or other aftermarket pressure plates unless specified.

Fits 1990-1995 Toyota MR2 (2.0T). This Competition Clutch ceramic six-puck sprung disc is designed as a direct replacement component for Competition Clutch performance kits. Engineered to handle increased torque loads, the ceramic friction material offers superior heat resistance and a more aggressive bite than standard organic discs, making it suitable for high-performance street and track applications.

The six-puck design maximizes surface area for heat dissipation, while the sprung hub assembly utilizes heavy-duty springs to dampen driveline shock and reduce vibration during engagement. This helps protect your 3S-GTE drivetrain during aggressive shifting and high-RPM launches.

• Manufacturer Part Number: 99719-1620
• Disc Style: 6-Puck Sprung Hub
• Friction Material: Ceramic
• Compatibility: Designed for use with Competition Clutch components
• Engine Fitment: 3S-GTE 2.0L Turbo

Fits 2008-2011 Hyundai Genesis Coupe 2.0L Turbo models. This genuine Competition Clutch Stage 2 replacement disc is engineered specifically for vehicles already equipped with the Competition Clutch 5095-2100 kit.

Designed to restore the bite and torque capacity of your drivetrain, this disc serves as a direct service component when your existing friction material is worn but the pressure plate and flywheel remain within service specifications. It provides the consistent engagement and increased heat resistance expected from a Stage 2 upgrade.

• Manufacturer Part Number: 99711-2150
• Compatibility: Replacement disc only for Competition Clutch kit P/N 5095-2100
• Application: 2.0L Turbocharged engines
• Component: Single Stage 2 friction disc (pressure plate not included)

Fits select 2005-2011 Subaru WRX and Legacy GT (V6-2.5L / 4-Cylinder-2.5L Turbo).

The Competition Clutch Stage 2 replacement clutch disc (MPN 99708-2150) is designed as a direct service component for existing Stage 2 clutch kits. This is a "Disc Only" offering, intended for enthusiasts who already have the Stage 2 pressure plate and flywheel from Kit 15026 but need to refresh the friction surface due to wear or a engine rebuild.

• Component Type: Replacement Clutch Disc (Disc Only)
• Series: Stage 2
• Manufacturer Part Number: 99708-2150
• Compatible Kit: Competition Clutch Kit 15026
• Application: Direct replacement for 2006-2011 Subaru WRX and 2005-2011 Subaru Legacy GT

Designed as a direct service component, this Competition Clutch replacement friction disc (MPN 99707-S-2600) is engineered specifically for use with the 15030-2600 clutch kit for select Subaru vehicles. This disc allows you to restore engagement precision and torque transfer when your existing friction material has reached its service limit, provided the pressure plate and flywheel are still within acceptable tolerances.

• Component: Replacement Friction Disc (Disc Only)
• Compatibility: Exclusively for Competition Clutch Kit 15030-2600
• Manufacturer Part Number: 99707-S-2600
• Purpose: Cost-effective drivetrain maintenance to restore grabbing power

Before installation, ensure the existing pressure plate and flywheel surfaces are inspected and resurfaced if necessary to guarantee proper bedding and prevent premature wear of the new friction material.

Fits 2002-2006 Acura RSX models equipped with K20 or K24 engine swaps or original equipment.

Maintain the performance of your drivetrain with this genuine Competition Clutch Stage 2 replacement disc (MPN 99696-2150). This component is designed specifically for use as a service part within Competition Clutch systems, allowing you to restore the torque capacity and engagement characteristics of your Stage 2 kit without needing to replace the entire assembly.

• Manufacturer Part Number: 99696-2150
• Series: Stage 2
• Compatibility: For use with Competition Clutch pressure plates and flywheels
• Engine Fitment: Honda/Acura K-Series (K20/K24) applications
• Application: Direct replacement disc for worn Stage 2 clutch units

Fits select 2002-2007 Acura RSX, Acura TSX, and Honda Civic Si models.

Designed as a direct replacement component for Competition Clutch kits, this ceramic sprung disc (MPN 99661-1620) is engineered for high-performance applications that demand superior heat management and aggressive engagement. The ceramic friction material provides a higher coefficient of friction compared to organic linings, making it ideal for street-to-track transitions and vehicles with increased torque output.

The sprung hub assembly features heavy-duty springs to dampen driveline vibrations and reduce shock loads during gear changes, protecting your transmission and improving overall drivability compared to rigid hub designs. This listing is for the clutch disc ONLY and is intended for use with compatible Competition Clutch pressure plates.

• Product Type: Replacement Clutch Disc
• Manufacturer Part Number: 99661-1620
• Disc Style: Sprung Hub
• Friction Material: Ceramic
• Fitment: 2002-2007 Acura RSX / 2003-2007 Acura TSX / 2002-2007 Honda Civic Si

Fits 2017-2023 Honda Civic Si (1.5T).

The Competition Clutch Stage 3 Street/Strip Series 2600 Clutch Kit is designed for high-performance street and track applications, providing up to a 150% increase in torque capacity. This kit utilizes a performance pressure plate paired with a high-torque sprung disc featuring segmented ceramic facings. This combination ensures quick, positive engagement and an extended service life under demanding conditions.

To further enhance drivetrain response, this package includes a 17lb steel flywheel, which replaces the heavier OE unit for improved engine revving and power delivery. The 2600 Series is a comprehensive solution for 1.5T owners looking to support significant power upgrades without sacrificing clutch reliability.

• Manufacturer Part Number: 8091-STU-2600
• Torque Capacity: Up to 150% increase
• Clutch Material: Segmented Ceramic
• Flywheel: 17lb Steel
• Disc Style: High-torque sprung hub
• Kit Includes: Performance pressure plate, clutch disc, 17lb steel flywheel, throw-out bearing, pilot bearing/bushing (where applicable), and alignment tool

Fits 2017-2023 Honda Civic Si (1.5T).

The Competition Clutch Stage 2 Street Series 2100 Clutch Kit is engineered for drivers requiring up to an 80% increase in torque capacity over the factory unit. This system is specifically designed for aggressive street use and moderate track applications, providing a significant increase in holding power without sacrificing drivability. The kit utilizes Brass Plus friction material with an alloy backing for smoother engagement and a longer service life than standard organic facings.

This package includes a 17lb steel flywheel, which replaces the heavy OE component to improve throttle response and engine acceleration. The high-torque sprung disc features anti-burst steel-backed facings to maintain integrity under high-RPM shifts and increased engine loads.

• Manufacturer Part Number: 8091-STU-2100
• Torque Capacity: Up to 80% increase over OEM
• Disc Material: Steel-backed Brass Plus organic
• Flywheel: 17lb steel flywheel included
• Pressure Plate: Competition Clutch high-performance unit
• Included Hardware: Throw out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool

Fits 2017-2023 Honda Civic Si (1.5T).

The Competition Clutch Stage 3 Street/Strip Series 2600 Clutch Kit is engineered for high-performance applications requiring a significant increase in holding power without sacrificing drivability. This kit provides up to a 150% increase in torque capacity over the factory unit, making it an ideal solution for modified 1.5T engines used in both daily driving and track environments. The segmented ceramic friction material on the disc allows for quick, positive engagement and improved heat dissipation for extended service life under heavy use.

This comprehensive kit replaces the factory dual-mass flywheel with a more durable 22lb steel flywheel, improving throttle response and providing a more consistent pedal feel. The high-torque sprung disc helps dampen vibrations and shock loads to protect your drivetrain components.

• Manufacturer Part Number: 8091-ST-2600
• Series: Stage 3 Street/Strip 2600
• Torque Capacity: Up to 150% increase over OE
• Flywheel Weight: 22 lbs
• Disc Material: Segmented Ceramic
• Disc Style: High-torque sprung hub

Kit Includes: Competition Clutch performance pressure plate, segmented ceramic sprung disc, 22lb steel flywheel, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.

Fits 2017-2020 and 2022-2023 Honda Civic Si (1.5T).

The Competition Clutch Stage 2 Street Series 2100 Clutch Kit is engineered for drivers requiring up to an 80% increase in torque capacity over the factory unit. This kit is specifically designed for aggressive street use and moderate track applications where thermal management and durability are critical. The Brass Plus friction material, featuring an alloy backing, is paired with a performance pressure plate to provide smooth engagement and extended service life.

This package includes a 22lb steel flywheel designed to replace the heavier OE unit, improving engine response and rotating mass. The high-torque sprung disc features anti-burst steel-backed Brass Plus facings to maintain integrity under high RPM and high-load conditions.

• Manufacturer Part Number: 8091-ST-2100
• Series: Street Series 2100 (Stage 2)
• Torque Capacity: Up to 80% increase over stock
• Flywheel Weight: 22 lbs
• Disc Material: Brass Plus with alloy backing
• Kit Includes: Performance pressure plate, high-torque sprung disc, 22lb steel flywheel, throw-out bearing, pilot bearing/bushing (where applicable), and alignment tool.

Fits select 2002-2016 Acura ILX, RSX, TLX, TSX and Honda Accord, Civic, CR-V, Crosstour, and Element (2.4L).

The Competition Clutch Stage 3 Street/Strip Series 2600 Clutch Kit is engineered for high-performance applications requiring up to a 150% increase in torque capacity over the factory unit. This kit features segmented ceramic friction material paired with a performance pressure plate to provide the high-torque bite needed for the track while maintaining the engagement characteristics necessary for street use. The sprung-hub disc design helps dampen drivetrain shock to protect your transmission during aggressive shifts.

This comprehensive kit includes a Competition Clutch flywheel and all necessary components for a complete installation, ensuring optimal balance and performance between the friction surfaces. All 2600 Series kits are manufactured to exacting tolerances to provide an extended service life under demanding conditions.

• Manufacturer Part Number: 8090-ST-2600
• Series: Stage 3 Street/Strip Series 2600
• Material: Segmented Ceramic
• Design: Sprung Hub Disc
• Increased torque capacity: Up to 150%
• Includes: Performance pressure plate, high-torque sprung disc, flywheel, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.

Fits select 2002-2016 Acura ILX, RSX, TLX, TSX and Honda Accord, Civic, CR-V, Crosstour, and Element (2.4L).

The Competition Clutch Stage 2 Street Series 2100 Clutch Kit is engineered for enthusiasts requiring a significant upgrade over factory equipment. Specifically designed for aggressive street use and moderate track applications, this kit provides up to an 80% increase in torque capacity. The 2100 Series utilizes Brass Plus friction material with an alloy backing, paired with a performance-tuned pressure plate to ensure smooth engagement and extended service life under high-load conditions.

The high-torque sprung disc features anti-burst steel-backed facings for added durability during high-RPM shifts. This comprehensive kit includes everything needed for a professional installation, including a matched flywheel to ensure optimal contact geometry and heat dissipation.

• Manufacturer Part Number: 8090-ST-2100
• Up to 80% increase in torque capacity
• Brass Plus material with alloy backing for smooth engagement
• Steel-backed anti-burst friction facings
• Includes Competition Clutch performance pressure plate and high-torque sprung disc
• Includes flywheel, throw-out bearing, pilot bearing/bushing (where applicable), and alignment tool

Fits 2002-2011 Acura RSX Type-S and Honda Civic Si (2.0L).

The Competition Clutch Stock Clutch Kit (8037-STOCK) is a direct-fit, OE-style replacement designed for vehicles that are stock or equipped with basic bolt-on modifications. This kit serves as an economical solution for drivers who need to replace a worn factory clutch without stepping up to a high-pressure racing unit.

Engineered to match the original equipment's specifications, this kit maintains the stock torque capacity and preserves the factory pedal feel. It ensures smooth engagement and reliable operation for daily driving, making it the ideal choice for restoring the drivetrain performance of your RSX or Civic Si.

• Direct replacement OE-style clutch kit
• Designed for stock torque capacity ratings
• Retains original factory pedal feel and engagement
• Compatible with stock or mildly modified 2.0L K-series engines
• Manufacturer Part Number: 8037-STOCK

Fits 2002-2011 Acura RSX Type-S and Honda Civic Si/MUGEN Si (2.0L).

The Competition Clutch Stage 3 Street/Strip Series 2600 Clutch Kit is engineered for high-performance applications requiring significantly more holding power than a standard OE unit. Featuring a high-torque sprung disc with segmented ceramic facings, this kit provides a 150% increase in torque capacity while maintaining the quick, smooth engagement necessary for aggressive street driving and weekend track sessions.

The 8037-2600 kit centers around a performance-grade pressure plate designed for increased clamp load without excessive pedal effort. The ceramic friction material is chosen for its superior heat dissipation and bite, extending the service life of the assembly under heavy load and high-heat conditions.

• Manufacturer Part Number: 8037-2600
• Torque Capacity: Up to 150% increase over stock
• Disc Design: High-torque sprung hub with segmented ceramic facings
• Kit Contents: Performance pressure plate, ceramic sprung disc, throw out bearing, pilot bearing/bushing (where applicable), and alignment tool

Fits 2002-2006 Acura RSX Type-S and 2002-2011 Honda Civic Si / MUGEN Si (2.0L).

The Competition Clutch 2400 Series Stage 1 Gravity Clutch Kit is engineered as an economical upgrade for moderately modified street cars or owners of stock vehicles who drive aggressively. This kit provides a significant 40-50% increase in torque capacity while maintaining the smooth pedal feel of the factory setup. It is an ideal solution for street-driven vehicles that need more bite without the harshness of a full race clutch.

Note: This kit is not intended for use with forced induction (turbochargers, superchargers) or nitrous oxide (NOS) systems.

• Manufacturer Part Number: 8037-2400
• Torque capacity increase of 40-50% over OE
• Maintains factory-style pedal effort and engagement
• Includes high-performance pressure plate
• Includes 6-pad ceramic high-torque performance disc (where applicable)
• Includes throw-out bearing and pilot bearing/bushing (where applicable)
• Includes clutch alignment tool for precise installation

Fits 2002-2011 Acura RSX Type-S and Honda Civic Si (including MUGEN Si).

The Competition Clutch Stage 2 – Street Series 2100 Clutch Kit is engineered for drivers who require a significant upgrade over the factory unit for aggressive street driving and moderate track days. This kit delivers up to an 80% increase in torque capacity, providing the bite needed for modified engines without sacrificing the smooth engagement required for daily drivability.

At the heart of the 2100 Series is the Brass Plus friction material. This material features an alloy backing for enhanced heat dissipation and extended service life. The high-torque sprung disc utilizes anti-burst steel-backed facings, ensuring structural integrity under high-RPM loads. Paired with a performance-tuned pressure plate, this setup offers a firm, predictable pedal feel.

• Manufacturer Part Number: 8037-2100
• Torque Capacity: Up to 80% increase over stock
• Friction Material: Steel-backed Brass Plus with alloy backing
• Disc Style: High-torque sprung hub
• Recommended Use: Aggressive street and moderate track use

Kit Includes: Competition Clutch performance pressure plate, high-torque sprung disc with anti-burst steel-backed Brass Plus facings, throw-out bearing, pilot bearing/bushing (where applicable), and alignment tool.