The Fuelab 60712 Dual 340 LPH E85 Pump Fuel Surge Tank System is engineered to eliminate fuel starvation in high-performance vehicles. By maintaining a dedicated reservoir of fuel, this system prevents the pressure drops and lean-out conditions often caused by fuel slosh during high-G cornering or hard acceleration.

• Manufacturer Part Number: 60712
• Dual Pump Configuration: Two high-efficiency 340 LPH internal pumps for high-horsepower demands.
• E85 Compatible: Fully compatible with E85, ethanol blends, and gasoline.
• Compact Reservoir: 290mm tall tank provides a constant fuel supply to the high-pressure pumps.
• Terminal Connections: Features reliable terminal connect electrical points for secure, high-current wiring.
• Versatile Mounting: Ideal for drift, circuit, or drag racing applications where tank baffling is insufficient.

The Fuelab 496 Series In-Tank Brushless Fuel Pump (49613) provides a high-efficiency solution for high-demand performance fuel systems. By utilizing advanced brushless motor technology, this pump delivers a consistent 500 LPH flow rate while reducing heat soak and electrical draw compared to traditional brushed pumps.

Designed for in-tank mounting, this unit features a 3/8-inch SAE quick-connect outlet for secure, leak-free plumbing. The brushless architecture eliminates mechanical brush wear, significantly extending service life and allowing for precise speed control when used with a compatible Fuelab pump controller.

• Part Number: 49613
• Flow Rate: 500 LPH
• Outlet Size: 3/8-inch SAE Quick-Connect
• Pump Type: In-tank brushless motor
• Improved thermal efficiency and reduced current draw
• Compatible with pump speed control systems

The Fuelab 72690-10 is a high-performance 90-degree swivel hose end fitting specifically engineered for use with -10AN PTFE-lined hoses. Designed for demanding plumbing environments, this fitting ensures a secure, leak-proof connection for fuel, oil, or cooling systems requiring the chemical resistance and pressure handling of PTFE.

The swivel design allows for 360-degree orientation after assembly, enabling precise clocking in tight engine bays to prevent hose binding or kinking. This simplifies the routing of custom lines while maintaining a professional, high-flow connection.

• Manufacturer Part Number: 72690-10
• Fitting Size: -10AN
• Angle: 90 Degree
• Fitting Style: Swivel Hose End
• Hose Compatibility: PTFE-lined hose only

The Fuelab 72600-10 straight swivel hose end is engineered for use with PTFE-lined hoses, providing a secure, leak-free connection for high-performance fuel systems. This -10AN fitting features a full-swivel design, allowing for 360-degree rotation after assembly to ensure precise clocking and easy alignment in tight engine bays.

• Part Type: Straight PTFE Hose End
• Size: -10AN
• Hose Compatibility: Specifically designed for PTFE-lined fuel hoses
• Swivel Function: Allows for adjustment and orientation during installation
• Manufacturer Part Number: 72600-10

Built to handle the corrosive properties of modern fuels and high-pressure demands, this fitting replaces standard non-swivel ends to simplify plumbing for EFI or carbureted setups.

Fits select GM vehicles requiring high-volume fuel delivery for high-performance EFI systems.

The Fuelab 49469 is a 494 Series High Output in-tank electric fuel pump designed to meet the demands of forced induction or high-horsepower naturally aspirated builds. Engineered for reliability and consistent pressure, this pump provides a 340 LPH flow rate to prevent lean conditions during spirited driving or track use. The center offset inlet configuration allows for a direct fit in many GM-specific fuel tank hangers and modules.

• Flow Rate: 340 LPH (Liters Per Hour)
• Inlet Configuration: Center Offset
• Pump Type: In-tank electric
• Series: 494 High Output
• Manufacturer Part Number: 49469

The Fuelab 848 Series Standard In-Line Fuel Filter provides high-efficiency filtration and integrated pressure maintenance for performance fuel systems. Designed to protect sensitive fuel injectors from fine contaminants, this filter features a 6-micron fiberglass element. The integrated internal check valve is a critical feature for performance applications, as it prevents fuel drain-back to maintain system prime and ensure faster, more reliable engine restarts.

• Standard length housing constructed for high-flow capacity
• -8AN male flare inlet and outlet ports for secure plumbing into existing fuel lines
• 6-micron replaceable fiberglass element for maximum debris capture
• Integrated check valve maintains line pressure and prevents backflow
• Durable black anodized finish for corrosion resistance and a clean aesthetic
• Compatible with gasoline, diesel, methanol, and ethanol fuels
• Manufacturer Part Number: 84832-1

The Fuelab Prodigy 41401-1 High Pressure EFI In-Line Fuel Pump is engineered for high-demand street and strip applications, providing enough volume to support up to 1000 HP. This pump utilizes a sophisticated DC brushless motor to provide superior efficiency and significantly lower current draw compared to traditional brushed pumps, reducing fuel temperature and increasing reliability.

Designed for external mounting, the 41401-1 features speed adjustability, allowing for precise control of fuel delivery when paired with compatible controllers. Its high-pressure capability makes it a direct fit for performance EFI systems requiring stable fuel flow under load.

• Manufacturer Part Number: 41401-1
• Performance Rating: Supports up to 1000 HP
• Motor Technology: Speed Adjustable DC Brushless
• System Type: High Pressure EFI
• Application: Street/Strip usage
• Housing Finish: Black Anodized
• Configuration: In-Line / External

The Fuelab 71703 High Flow One Way Check Valve is a critical component for maintaining consistent fuel system performance. By preventing fuel from draining back into the tank when the pump is off, this valve maintains line pressure for quicker engine starts and prevents pump cavitation during initial priming. Designed for high-performance applications, it features a high-flow internal design that supports up to 350 GPH with minimal restriction.

• Manufacturer Part Number: 71703
• Fitting Size: -8AN (Inlet and Outlet)
• Flow Rating: 350 GPH
• Operation: One-way check valve to prevent backflow and maintain fuel prime
• Compatibility: Suitable for high-demand fuel systems requiring -8AN plumbing

Restore the precision and reliability of your fuel system with the Fuelab 14601 Diaphragm and O-Ring Kit. This essential service kit is specifically engineered for Fuelab 515xx and 525xx series fuel pressure regulators equipped with a standard seat. Over time, internal components can fatigue under constant pressure; this kit provides a direct replacement for worn diaphragms and seals to ensure consistent fuel delivery and prevent external leaks or pressure creep.

• Precision Fit: Designed exclusively for Fuelab 515xx and 525xx series regulator bodies.
• Seat Configuration: Compatible with models utilizing the Fuelab standard seat.
• System Integrity: Replaces the internal diaphragm and O-rings to maintain optimal fuel pressure regulation.
• Part Number: 14601

This kit includes all necessary internal soft goods for a standard regulator refresh, helping you maintain the performance of your EFI or carbureted fuel system without requiring a complete regulator replacement.

The Fuelab 14502 Bracket and Hardware Kit provides a secure, professional mounting solution for 515xx and 525xx series fuel pressure regulators. Engineered for a precise fit, this kit ensures your regulator remains stable and properly positioned, even in high-vibration environments.

• Direct fit for Fuelab 515xx and 525xx series fuel pressure regulators
• Includes heavy-duty mounting bracket and necessary installation hardware
• Designed for long-term durability and corrosion resistance
• Facilitates a clean, stable installation in the engine bay
• Manufacturer Part Number: 14502

The Fuelab PRO Series Extreme Flow In-Line Fuel Filter is engineered for high-demand fuel systems requiring maximum volume and minimal pressure drop. Designed to handle flow rates up to 10gpm, this filter provides essential protection for your fuel pump and injectors without restricting performance in high-horsepower applications.

• Flow Capacity: 10gpm (Gallons Per Minute)
• Port Size: -12AN inlet and -12AN outlet
• Filter Element: 100 micron stainless steel mesh
• Material: Machined aluminum housing with a matte black finish
• Application: Ideal for use as a pre-filter to protect fuel pumps from debris
• Manufacturer Part Number: 86824

This PRO Series filter features a cleanable and reusable stainless steel element, ensuring long-term reliability and consistent filtration. The large -12AN ports allow for maximum throughput, making it a critical component for extreme-flow fuel plumbing setups.

The Fuelab 848 Series In-Line Fuel Filter provides critical protection for your fuel system, combining high-flow efficiency with fine-particle filtration. This standard-length filter features a 6-micron fiberglass element, designed to capture microscopic contaminants before they reach sensitive fuel injectors or carburetors. The integrated check valve prevents fuel drain-back, maintaining system pressure for faster startups and consistent delivery.

• Precision Filtration: 6-micron fiberglass element provides superior debris capture for high-performance fuel systems.
• Integrated Check Valve: Maintains rail pressure and prevents backflow during off-cycles.
• Robust Construction: Machined for durability with a sleek black finish for corrosion resistance and engine bay aesthetics.
• Universal Fitment: Standard length body equipped with -6AN inlet and outlet ports for secure, leak-free plumbing.

Specifications:

• Part Number: 84831-1
• Filter Type: In-Line
• Element Material: 6 Micron Fiberglass
• Inlet/Outlet Size: -6AN
• Features: Integrated Check Valve
• Color: Black

The Fuelab 83801 In-Tank Fuel Sock Kit provides critical pre-filtration for high-performance fuel systems. This kit features a 100-micron stainless steel mesh filter that protects your fuel pump from tank-born debris and contaminants without creating excessive flow restriction. It includes a -10AN adapter fitting designed for direct installation on Fuelab 4X4xx series fuel pumps.

• 100-micron filtration rating protects pump internals from damage
• Durable stainless steel mesh construction for chemical resistance and longevity
• Includes -10AN adapter fitting for a secure connection
• Specifically designed for Fuelab 4X4xx series fuel pumps
• Manufacturer Part Number: 83801

The Fuelab 828 Series In-Line Fuel Filter (MPN 82833-1) is engineered for high-performance fuel systems requiring fine filtration and high flow capacity. This long-length filter housing is finished in black and equipped with -10AN male flare inlet and outlet ports, making it a direct fit for performance plumbing applications. Inside, the 6 micron fiberglass element provides a critical secondary filtration stage to protect fuel injectors and other sensitive components from minute contaminants.

• Manufacturer Part Number: 82833-1
• Filter Series: 828 (Long Length)
• Inlet/Outlet: -10AN Male Flare
• Filter Media: 6 Micron Fiberglass
• Finish: Black Anodized
• Application: In-line fuel filtration for performance systems

Protect your high-performance fuel system and precision fuel injectors with the Fuelab 828 Series long in-line fuel filter. This filter is designed for high-flow applications where filtration efficiency is critical, utilizing a 6-micron fiberglass element to capture fine contaminants before they reach the engine.

• Model/Series: 828 Series Long
• Part Number: 82832-1
• Filtration Media: 6 Micron Fiberglass
• Inlet/Outlet: -8AN Male
• Housing Finish: Black Anodized Aluminum

The long-body design provides increased surface area for the filter element, ensuring minimal pressure drop while maintaining high dirt-holding capacity. This in-line unit is compatible with most standard fuel types and features a durable anodized finish for corrosion resistance in harsh automotive environments.

The Fuelab 82831-1 In-Line Fuel Filter offers high-capacity filtration for performance fuel systems. This "Long" body configuration provides increased internal surface area, ensuring minimal pressure drop and extended service intervals compared to shorter housings. Designed for use as a final post-filter, the 6 micron fiberglass element captures microscopic contaminants to protect fuel injectors from damage and clogging.

• Manufacturer Part Number: 82831-1
• Body Series: 828 Series (Long)
• Inlet/Outlet: -6AN Male Flare
• Filter Media: 6 Micron Fiberglass (Non-cleanable)
• Finish: Black Anodized
• Compatibility: Suitable for gasoline, diesel, methanol, and ethanol fuels

The housing is machined from billet aluminum with a durable anodized finish. This filter is an essential component for maintaining the integrity of high-flow fuel systems in racing and high-performance street applications.

The Fuelab 828 Series Long In-Line Fuel Filter (82811-1) provides high-capacity filtration for performance fuel systems. Built with a durable black finish, this filter is designed to maintain high flow rates while protecting sensitive downstream components like injectors and pumps from debris.

This "Long" housing configuration contains a 40-micron stainless steel element, making it ideal for use as a primary filter or as a high-flow pre-filter in various fuel setups. The stainless steel element is compatible with most fuel types, including gasoline, diesel, methanol, and ethanol blends. Its -6AN inlet and outlet ports ensure a secure, leak-free connection with standard high-performance fuel lines.

• Manufacturer Part Number: 82811-1
• Housing Length: Long
• Inlet/Outlet Port Size: -6AN
• Filter Rating: 40 Micron
• Filter Element Material: Stainless Steel
• Finish: Black Anodized

The Fuelab 828 Series In-Line Fuel Filter provides critical protection for high-performance fuel systems. This long-body 82802-1 model is designed to maximize filter surface area, ensuring high flow rates with minimal pressure drop. It features a 10-micron replaceable fabric element, making it an ideal choice as a post-filter to safeguard fuel injectors from fine particulates in gasoline or diesel applications.

Built for durability and ease of service, the housing is machined with -8AN male flare inlet and outlet ports for secure plumbing. The black anodized finish provides a professional look while protecting the assembly from corrosion in harsh engine bay or under-chassis environments.

• Long-format filter body for increased flow capacity and longer service intervals.
• 10-micron fabric element provides fine filtration for injector protection.
• Replaceable internal element allows for cost-effective maintenance.
• Black anodized finish for superior corrosion resistance.

• Manufacturer Part Number: 82802-1
• Inlet/Outlet Size: -8AN Male
• Filter Rating: 10 Micron
• Element Material: Fabric
• Housing Length: Long
• Finish: Black Anodized

Protect your high-performance fuel system from harmful debris with the Fuelab 828 Series In-Line Fuel Filter. This long-body configuration is engineered for increased filtration surface area, ensuring minimal pressure drop even in high-flow applications. Featuring a 10-micron replaceable fabric (cellulose) element, this unit is specifically designed for use as a secondary filter post-pump to shield fuel injectors from fine particulates.

• Manufacturer Part Number: 82801-1
• Body Type: Long length for high-capacity filtration
• Inlet/Outlet: -6AN Male Flare
• Filter Element: 10 Micron replaceable fabric (cellulose)
• Finish: Black anodized for corrosion resistance and durability
• Compatible with gasoline and diesel fuels

The 82801-1 is built with a hard-anodized aluminum housing and includes internal spring-loaded seals to ensure the filter element is seated securely, preventing any fuel bypass.

The Fuelab 818 Series Standard Length In-Line Fuel Filter provides critical protection for high-performance fuel systems. This 81833-1 model features a 6-micron fiberglass element, specifically designed for fine filtration to prevent debris from reaching sensitive injectors and pumps without compromising fuel flow. The durable housing and premium element are engineered for easy maintenance and reliable performance in demanding street or track environments.

• Filtration: 6-micron fiberglass element for high-efficiency debris removal
• Port Size: -10AN inlet and outlet for high-flow compatibility
• Construction: Durable aluminum housing with a black anodized finish
• Configuration: Standard length body for versatile mounting options
• Compatibility: Compatible with gasoline, diesel, methanol, and ethanol fuels
• Manufacturer Part Number: 81833-1

This filter is an essential component for maintaining fuel system health, ensuring that your engine receives clean fuel at the required volume and pressure.

The Fuelab 81832-1 Standard In-Line Fuel Filter provides critical protection for high-performance fuel systems, utilizing a 6-micron fiberglass element designed for fine filtration before fuel reaches sensitive injectors. This standard-length filter housing is engineered to maintain high flow rates while capturing microscopic contaminants that can cause injector failure or fuel pump wear.

• Manufacturer Part Number: 81832-1
• Series: 818 (Standard Length)
• Inlet/Outlet Size: -8AN Male
• Filter Media: 6-Micron Fiberglass element
• Housing Material: Aluminum with Black Anodized finish
• Application: Suitable for use as a final post-filter in EFI systems

The Fuelab 818 Series Standard In-Line Fuel Filter provides essential protection for high-performance fuel systems. This standard-length housing is engineered for maximum flow and effective filtration, utilizing a fine 6 micron fiberglass element to capture microscopic contaminants before they can reach and damage sensitive fuel injectors.

Constructed with a durable black anodized finish, the 81831-1 is designed for easy integration into your fuel plumbing with integrated -6AN male flare inlet and outlet ports. The fiberglass filter element is specifically suited for use as a post-filter in electronic fuel injection (EFI) systems where fine particulate removal is critical.

• Manufacturer Part Number: 81831-1
• Series: 818 Standard Length
• Inlet/Outlet Size: -6AN Male Flare
• Filter Media: 6 Micron Fiberglass
• Housing Material: Aluminum with Black Anodized Finish
• Application: Universal in-line fuel filtration

The Fuelab 818 Series In-Line Fuel Filter provides essential protection for high-performance fuel systems. This standard-length housing is designed for maximum flow with minimal pressure drop, featuring -10AN inlet and outlet ports for secure plumbing with high-flow fuel lines.

Inside, the filter utilizes a 100-micron stainless steel element, making it an ideal pre-filter for protecting your fuel pump from large debris that can cause premature wear or failure. The housing is finished in a durable black anodize for long-lasting corrosion resistance in harsh automotive environments.

• Manufacturer Part Number: 81823-1
• Inlet/Outlet Size: -10AN Male
• Filter Element: 100 Micron Stainless Steel (cleanable/replaceable)
• Housing Length: Standard
• Finish: Black Anodized
• Compatibility: Suitable for use with gasoline, diesel, methanol, and ethanol

The Fuelab 818 Series Standard In-Line Fuel Filter provides high-flow protection for your vehicle's fuel system. Engineered for performance and durability, this filter features a standard-length housing with -8AN male flared inlet and outlet ports, ensuring a secure, leak-free connection under high pressure. The 100-micron stainless steel element is designed for use as a pre-filter, protecting fuel pumps from large contaminants without restricting flow or causing excessive pressure drop.

• 100-micron stainless steel filter element for coarse filtration
• -8AN male flared inlet and outlet ports
• Standard length housing for flexible mounting options
• Black anodized finish for superior corrosion resistance
• Compatible with gasoline, diesel, methanol, and ethanol fuels
• Manufacturer Part Number: 81822-1

The Fuelab 81813-1 is a standard-length 818 Series In-Line Fuel Filter engineered for high-performance fuel systems requiring maximum flow and reliable debris protection. This filter utilizes a 40-micron stainless steel element, offering a durable and cleanable filtration solution that protects sensitive fuel injectors and pumps without causing significant pressure drop.

Constructed from high-quality billet aluminum and finished in a black anodize, this housing is designed to withstand the rigors of high-pressure fueling and harsh environmental conditions. The -10AN male flare inlet and outlet ports provide secure, leak-free connections for large-diameter fuel lines. This versatile filter is compatible with gasoline, diesel, methanol, and ethanol fuels, including E85.

• Manufacturer Part Number: 81813-1
• Series: 818 In-Line Fuel Filter (Standard Length)
• Inlet/Outlet Size: -10AN Male Flare
• Filter Element: 40 Micron Stainless Steel (Cleanable/Reusable)
• Material: Billet Aluminum
• Finish: Black Anodized
• Fuel Compatibility: Gasoline, Diesel, Methanol, Ethanol/E85

Protect your fuel system components with the Fuelab 818 Series In-Line Fuel Filter. Designed for high-performance applications, this standard-length filter provides a critical line of defense against contaminants that can damage fuel pumps and injectors. It features -8AN male flared inlet and outlet ports for a secure, high-flow connection to your fuel lines.

The 81812-1 model is equipped with a 40-micron stainless steel filter element, offering a balance of high flow capacity and effective filtration. This durable mesh element is compatible with a wide range of fuels, including gasoline, diesel, methanol, and ethanol (E85). The housing is finished in a sleek black anodized coating for long-lasting corrosion resistance in harsh automotive environments.

• Manufacturer Part Number: 81812-1
• Series: 818 Series (Standard Length)
• Inlet/Outlet Size: -8AN Male Flare
• Filter Element: 40 Micron Stainless Steel Mesh
• Housing Material: Aluminum
• Finish: Black Anodized
• Compatible with gasoline, diesel, methanol, and ethanol

The Fuelab 818 Series standard length in-line fuel filter provides high-flow protection for performance fuel systems. Engineered to capture debris and contaminants that can damage fuel injectors and pumps, this filter is a critical component for maintaining system longevity and fuel delivery precision. It features a durable 40-micron stainless steel filter element, which offers excellent filtration while remaining compatible with a wide range of fuel types.

• Standard length housing with a corrosion-resistant black anodized finish
• -6AN male flare inlet and outlet ports for secure plumbing
• 40-micron stainless steel element provides high-efficiency filtration
• Compact in-line design for versatile mounting in tight chassis spaces
• Manufacturer Part Number: 81811-1

Protect your high-performance fuel system with the Fuelab 818 Series Standard In-Line Fuel Filter. Engineered for precision filtration, this unit features a 10 micron replaceable fabric element designed to capture fine contaminants before they reach sensitive injectors or fuel pumps. The housing is machined for durability and finished in a sleek black anodized coating for superior corrosion resistance.

• In-line fuel filter with a standard length housing
• Includes 10 micron replaceable fabric element
• Equipped with -8AN male flared inlet and outlet ports
• Durable machined aluminum construction with black anodized finish
• Manufacturer Part Number: 81802-1

This filter is an essential component for maintaining fuel system integrity in demanding applications where filtration precision and flow capacity are critical. It is designed for easy serviceability, allowing for quick element replacement during routine maintenance.

Protect your fuel system components with the Fuelab 818 Series Standard In-Line Fuel Filter (MPN 81801-2). Designed for high-performance applications, this filter features a 10-micron fabric element that captures fine particulates to prevent injector clogging and premature wear. The standard-length housing is finished in a durable red anodize, providing both corrosion resistance and a clean look for your engine bay.

• Filtration: 10-micron replaceable fabric element for superior particulate removal.
• Fittings: -6AN inlet and outlet ports for secure, leak-free plumbing into your fuel system.
• Housing: Standard length design optimized for space-efficient installation.
• Finish: Red anodized finish for durability and professional aesthetics.
• Serviceability: Features a replaceable internal element to maintain peak filtration efficiency over time.

The Fuelab 81801-1 In-Line Fuel Filter provides essential protection for your fuel system, specifically designed to trap fine contaminants before they reach sensitive injectors. This standard-length 818 Series filter utilizes a 10-micron replaceable fabric element, making it an ideal choice for use as a post-filter in high-pressure EFI configurations.

Constructed for performance and ease of maintenance, the housing features -6AN male flare inlet and outlet ports for secure plumbing into your existing fuel lines. The durable billet construction is finished in a black anodize for superior corrosion resistance and a professional look. The internal filter element can be easily serviced or replaced to maintain optimal fuel flow and system health.

• Manufacturer Part Number: 81801-1
• Series: 818 (Standard Length)
• Inlet/Outlet: -6AN Male Flare
• Filter Media: 10 Micron Fabric (Replaceable)
• Finish: Black Anodized
• Housing Material: Billet Aluminum