Ensure a consistent, leak-free seal on your induction system with the Vibrant Performance HD PowerFilter Replacement O-Ring. Specifically engineered for the HD PowerFilter assembly, this replacement gasket restores the critical seal between the filter element and housing, preventing unfiltered air from entering your engine.

Over time, heat cycles and repeated service intervals can cause original seals to flatten, crack, or lose elasticity. Replacing a worn O-ring during routine maintenance is essential to maintaining the integrity of your intake or forced induction system. This component is manufactured to precise tolerances for a perfect fit and reliable compression.

• Direct replacement for Vibrant Performance HD PowerFilter assemblies
• Restores airtight sealing for optimal filtration and intake performance
• Precision-sized Inner Diameter (ID): 50.47mm
• Constructed from high-grade elastomer to resist heat and engine bay fluids

Maintain a secure, leak-free seal in your performance fluid assembly with this Vibrant Performance replacement O-ring. This component is constructed entirely from high-grade FKM (Viton) rubber, offering superior resistance to high temperatures and chemical degradation from fuels and oils compared to standard nitrile seals.

• Manufacturer Part Number: 11490R
• Material: FKM (Viton) Rubber
• Direct replacement for O-rings used in Vibrant fittings #11490 and #11490S
• Engineered for durability in high-performance plumbing and fluid transfer systems

Ensure a leak-free seal in your high-performance fluid systems with this Radium Engineering 5-pack of -8AN ORB Viton O-rings. These O-rings are designed specifically for -8AN (3/4-16 thread) O-Ring Boss fittings commonly found on fuel rails, catch cans, and regulator ports. Replacing worn or pinched seals is critical during maintenance to prevent dangerous fuel or oil leaks.

Constructed from Viton (FKM), these seals offer superior chemical resistance and thermal stability compared to standard nitrile rubber. They are engineered to withstand exposure to gasoline, ethanol blends (E85), diesel, and synthetic engine oils without swelling or degrading over time.

• Quantity: 5-Pack
• Fitting Size: -8AN ORB (3/4-16)
• Material: High-temp Viton (FKM)
• Application: Fuel, Oil, and Coolant systems
• Manufacturer Part Number: 18-0043-08

The Fel-Pro ES70599 Fuel Injector O-Ring Kit is engineered to provide a reliable seal in the demanding environment of a high-pressure fuel system. These O-rings are designed specifically for the repair environment, utilizing proprietary materials that compensate for imperfect sealing surfaces found on older or high-mileage fuel rails and injectors. Replacing worn or brittle seals with this kit prevents fuel leaks and eliminates vacuum leaks that can lead to poor idle and performance issues.

• Fits select 1984-2021 Acura, Audi, Buick, Cadillac, Chevrolet, and other domestic and import models.
• Meets or exceeds all original equipment (OE) specifications for fit and material composition.
• Application-specific design ensures a precise fit for reliable, leak-free operation.
• Engineered and validated for fit, form, and function in professional repair environments.
• Manufacturer Part Number: ES70599

The Vibrant Performance 12546R is a high-grade replacement O-ring designed specifically for use with 3-inch weld fittings. Engineered to restore a leak-free seal in performance plumbing and custom fabrication projects, this O-ring ensures reliable containment of fluids and gases under demanding conditions.

Constructed entirely from premium FKM (Fluoroelastomer) rubber, this component offers superior resistance to heat, oil, and chemical degradation compared to standard nitrile or EPDM seals. It is an essential service item for maintaining the integrity of your weld-on assemblies during routine maintenance or reassembly.

• Manufacturer Part Number: 12546R
• Material: FKM Rubber (Viton)
• Size: Optimized for 3-inch (76.2mm) weld fittings
• Chemical Resistance: High resistance to fuels, oils, and high temperatures
• Sold individually

Maintain a leak-free seal in your high-performance plumbing system with this genuine Vibrant Performance replacement O-ring. Specifically engineered for use with 5.00-inch HD Weld Fittings, this component is essential for ensuring pressure-tight connections in intake and charge piping applications where standard gaskets may fail.

• Material: Constructed from high-grade FKM (Fluorocarbon) rubber for superior heat and chemical resistance.
• Compatibility: Designed exclusively for Vibrant 5.00in (127mm) HD Weld Fittings.
• Durability: Engineered to withstand the thermal cycles and pressures found in forced induction systems.
• Manufacturer Part Number: 12580G
• Includes: One (1) replacement O-ring.

Restore the precision and reliability of your fuel system with the Fuelab 14601 Diaphragm and O-Ring Kit. This essential service kit is specifically engineered for Fuelab 515xx and 525xx series fuel pressure regulators equipped with a standard seat. Over time, internal components can fatigue under constant pressure; this kit provides a direct replacement for worn diaphragms and seals to ensure consistent fuel delivery and prevent external leaks or pressure creep.

• Precision Fit: Designed exclusively for Fuelab 515xx and 525xx series regulator bodies.
• Seat Configuration: Compatible with models utilizing the Fuelab standard seat.
• System Integrity: Replaces the internal diaphragm and O-rings to maintain optimal fuel pressure regulation.
• Part Number: 14601

This kit includes all necessary internal soft goods for a standard regulator refresh, helping you maintain the performance of your EFI or carbureted fuel system without requiring a complete regulator replacement.

The Wehrli Custom Fab WCF203-21 is a precision replacement O-ring seal designed specifically for Borg Warner S400 turbocharger compressor cover outlet v-band flanges. This seal ensures a reliable, airtight connection at the compressor discharge, preventing boost leaks that can degrade engine performance and turbocharger efficiency.

This O-ring is a direct replacement for seals used in various WCFab turbocharger systems, including single turbo installs and compound turbo configurations for Cummins and LB7 Duramax applications.

• Fits Borg Warner S400 compressor cover outlet v-band flanges
• Maintains critical seal at the turbocharger discharge point
• High-temperature resistant material for turbocharger environments
• Manufacturer Part Number: WCF203-21

Direct Replacement for the following WCFab Kits:

• LB7 Duramax S400 Single Turbo Install Kit (WCF100489)
• 2004.5-2007 5.9L Cummins S400 High Mount 2nd Gen Swap Kit (WCF100486)
• 2003-2007 5.9L Cummins S400/Stock Twin Turbo Kit (WCF100567)
• 2003-2007 5.9L Cummins S400/S400 Side by Side Compound Turbo Kit (WCF100580)

Fits select 2003-2010 Ford E-350/F-250/F-350 Super Duty, E-350 Club Wagon, and Excursion.

The MAHLE Original GS33711 Injector O-Ring Kit is engineered to provide a precise, high-pressure seal for your vehicle's fuel injection system. Over time, heat and engine vibration can degrade factory O-rings, leading to internal fuel leaks, hard starts, or engine misfires. This kit replaces worn seals with professional-grade components designed to restore system integrity and prevent fuel contamination in the engine oiling system.

• Manufactured to meet or exceed original equipment specifications for fit and material quality.
• Constructed from high-temperature resistant elastomers to withstand the harsh environment of a diesel engine.
• Designed for a direct-fit installation into the factory fuel injector housing.
• Essential for routine injector maintenance or when reinstalling injectors after service.
• Manufacturer Part Number: GS33711

The Vibrant Performance AN Thread O-Ring Box Set (MPN 20999) provides a comprehensive assortment of seals designed to meet standard AN specifications. These O-rings are specifically required when installing straight-cut (non-flare) AN fittings to ensure a reliable, leak-free seal in high-performance plumbing systems.

Constructed to withstand demanding automotive environments, these O-rings are fully resistant to gasoline and alcohol-based fuels, including E85. This kit is an essential resource for any technician or builder working on custom fuel, oil, or cooling systems, providing the correct seal for various port sizes in one organized container.

• Includes AN sizes: -3, -4, -5, -6, -8, -10, -12, and -16
• Application: Optimized for straight-cut (ORB) AN fittings
• Compatibility: Resistant to gasoline, alcohol, and E85 fuels
• Construction: Durable elastomeric material for long-term sealing
• Manufacturer Part Number: 20999

Vibrant Performance -20AN Rubber O-Rings are engineered to meet standard AN specifications, providing a critical, leak-free seal for high-performance fluid plumbing. These O-rings are mandatory for any installation utilizing straight-cut (non-flare) AN adapter fittings, where the seal is created by the compression of the rubber against the port face.

• Material: High-grade fuel-resistant rubber
• Chemical Resistance: Rated for use with gasoline and alcohol-based fuels, including E85
• Application: Designed specifically for -20AN straight cut ORB fittings
• Quantity: Pack of 10
• Manufacturer Part Number: 20899

Whether you are plumbing a fuel system or an oiling setup, these O-rings ensure long-term durability and resistance to degradation from modern pump and racing fuels.

Vibrant Performance -12AN rubber O-rings are engineered to provide a reliable, leak-free seal in high-performance plumbing systems. These O-rings are essential components when installing straight-cut (non-flare) AN fittings into ports, preventing fluid weepage under pressure.

Constructed from a durable rubber compound, these seals are designed to withstand harsh automotive fluids, offering excellent resistance to gasoline and alcohol-based fuels, including E85. This 10-pack ensures you have replacements on hand for maintenance or new plumbing projects.

• Size: -12AN
• Application: Straight-cut (non-flare) AN fittings
• Material: Fuel-resistant rubber compound
• Chemical Resistance: Gasoline, alcohol-based fuels, and E85
• Quantity: Pack of 10
• Manufacturer Part Number: 20892

Vibrant Performance -10AN Rubber O-Rings are engineered to provide a reliable, leak-free seal for components meeting standard AN specifications. These O-rings are essential when installing straight-cut (non-flare) AN fittings, ensuring a secure interface between the fitting and the port to prevent fluid loss or vacuum leaks.

• Size: -10AN
• Material: Fuel-resistant rubber compound
• Chemical Resistance: Gasoline, alcohol-based fuels, and E85
• Quantity: Pack of 10
• Manufacturer Part Number: 20890

Designed for durability in performance fueling and oiling systems, these O-rings maintain their sealing integrity even when exposed to aggressive fuel types and high-temperature environments.

Vibrant Performance -8AN Rubber O-Rings are engineered to meet standard AN specifications, providing a reliable, leak-free seal for high-performance fluid delivery systems. These O-rings are a necessary component when installing straight-cut (non-flare) AN fittings, ensuring a secure seat against the port surface to prevent weepage under pressure.

Constructed from high-grade rubber, these seals are designed to withstand the chemical demands of modern performance fuels. They offer excellent resistance to gasoline and alcohol-based fuels, including E85, ensuring long-term integrity in demanding engine bay environments.

• Size: -8AN
• Quantity: Pack of 10
• Application: Straight-cut (non-flare) AN fittings
• Fuel Compatibility: Gasoline, Alcohol, and E85
• Part Number: 20888

Vibrant Performance rubber O-rings are engineered to meet standard AN specifications, providing a dependable, leak-free seal for high-performance plumbing. These are essential components when installing straight-cut (non-flare) AN fittings, also known as O-Ring Boss (ORB) style, to ensure proper fluid retention under pressure.

Constructed from a durable rubber compound, these O-rings are specifically formulated for chemical resistance against standard gasoline and alcohol-based fuels, including E85. This resilience ensures the seals will not degrade or swell when exposed to modern performance fuels, maintaining system integrity in street and track applications.

• Size: -6AN
• Quantity: Pack of 10
• Compatibility: Straight-cut (non-flare) AN fittings
• Chemical Resistance: Gasoline, Ethanol, Alcohol, and E85
• Manufacturer Part Number: 20886

Vibrant Performance O-rings are engineered to meet standard AN specifications, providing a critical, leak-free seal for high-performance fluid systems. These rubber seals are specifically required when installing straight-cut (non-flare) AN fittings to ensure a proper mechanical interface.

• Designed for standard -4AN straight-cut (non-flare) fittings
• Constructed from high-quality rubber for durable sealing performance
• Resistant to gasoline and alcohol-based fuels, including E85
• Essential for preventing fluid leaks in fuel, oil, and coolant systems
• Includes 10 O-rings per pack
• Manufacturer Part Number: 20884

This Vibrant Performance replacement O-ring (MPN 14942R) is designed as a direct service component for part number 14942. Manufactured from high-grade PTFE (Polytetrafluoroethylene), this seal is engineered to withstand harsh chemicals and extreme temperatures that would typically degrade standard rubber O-rings.

• Direct replacement for Vibrant Performance part 14942
• Premium PTFE construction for superior thermal and chemical resistance
• Maintains a critical, leak-free seal in automotive plumbing and fluid systems
• Manufacturer Part Number: 14942R

Maintain a reliable, leak-free seal on your custom plumbing with this Vibrant Performance replacement O-ring. Specifically engineered for use with 4.00-inch Vibrant HD Weld Fittings, this O-ring ensures the integrity of your modular clamp system under pressure.

• Material: Constructed entirely from FKM (Fluoroelastomer) rubber for superior heat and chemical resistance.
• Compatibility: Designed exclusively for 4.00in HD series weld-on flanges and fittings.
• Reliability: Provides a high-performance seal capable of withstanding the rigors of forced induction and cooling systems.
• Manufacturer Part Number: 12578G

Ideal for use as a spare or a replacement for worn or damaged seals during system maintenance.

Ensure a reliable, high-pressure seal for your charge piping with this genuine Vibrant Performance replacement O-ring. Specifically engineered for 3.50-inch HD Weld Fittings, this component is essential for maintaining the performance and integrity of your HD Clamp assembly.

• Material: Constructed from premium FKM rubber for exceptional resistance to heat, oil, and chemicals.
• Application: Designed exclusively for Vibrant 3.50in HD Weld Fittings.
• Function: Provides a critical, airtight seal to prevent boost leaks and vacuum drops in forced induction systems.
• Part Number: 12577G

Ensure a leak-free seal in your high-pressure plumbing or intake system with this Vibrant Performance replacement O-ring. Specifically engineered for 3.00-inch HD Weld Fittings, this component is essential for maintaining the pressure integrity and reliability of your HD Clamping System.

Fabricated entirely from high-grade FKM (fluoroelastomer) rubber, these O-rings provide exceptional resistance to high temperatures, chemical degradation, and automotive fluids. Unlike standard rubber seals, FKM is designed to withstand the harsh environments found in forced induction and high-performance cooling applications without hardening or cracking.

• Manufacturer Part Number: 12576G
• Material: 100% FKM Rubber
• Application: Replacement seal for 3.00" HD Weld Fittings
• Compatibility: Vibrant HD Clamping Systems
• Chemical and high-temperature resistant

Ensure a reliable, leak-free seal on your forced induction or intake system with this Vibrant Performance replacement O-ring. Specifically designed for use with Vibrant 2.50in HD Clamp weld fittings, this O-ring is essential for maintaining pressure integrity in high-performance applications where standard seals might fail due to heat or chemical exposure.

Constructed entirely from FKM (Fluoroelastomer) rubber, this seal offers superior durability compared to standard nitrile or EPDM alternatives. It is engineered to withstand extreme temperatures and is highly resistant to oils and fuels, ensuring a long-lasting service life under the hood.

• Material: FKM (Fluoroelastomer) Rubber
• Compatibility: Specifically for Vibrant 2.50in HD Weld Fittings
• Chemical Resistance: High resistance to oils, fuels, and heat
• Manufacturer Part Number: 12575G

Maintain a leak-proof seal in your custom fabrication projects with this Vibrant Performance replacement O-ring. Precision-engineered as a direct replacement for 4-inch weld fittings, this seal ensures the integrity of your fluid or air connections under demanding conditions.

• Material: High-temperature FKM Rubber (Viton)
• Size: Compatible with 4.00" (101.6mm) Vibrant weld fittings
• Durability: Exceptional resistance to heat, oils, and various automotive chemicals
• Fitment: Designed specifically for Vibrant weld-on components
• Manufacturer Part Number: 12548R

Ensure a leak-free seal on your custom plumbing with this Vibrant Performance replacement O-ring. Specifically engineered for 3.5-inch weld fittings, this O-ring is a critical service component for maintaining system integrity in intake, cooling, or fluid transfer applications.

Constructed entirely from premium FKM rubber (Viton), this seal provides exceptional thermal stability and chemical resistance. Unlike standard nitrile seals, FKM is designed to withstand exposure to aggressive automotive fluids, including oils and fuels, without degrading or losing its sealing profile. This is a direct replacement for the original seal found in Vibrant Performance fitting assemblies.

• Material: FKM Rubber (Viton)
• Fitting Size: 3.5in
• Application: Replacement seal for Vibrant weld fittings
• High resistance to chemical degradation and heat
• Manufacturer Part Number: 12547R

Maintain a leak-free seal in your custom fabrication projects with this Vibrant Performance replacement O-ring. Specifically designed for use with Vibrant 2.5-inch weld-on fittings, this seal is critical for preventing vacuum or pressure leaks in intake, cooling, or oiling systems.

These O-rings are manufactured from FKM (Fluorocarbon) rubber, a material chosen for its exceptional resistance to high temperatures and chemical exposure. Whether you are running oil, fuel, or coolant, the FKM construction ensures the seal remains pliable and effective under thermal stress where standard nitrile or neoprene seals might fail.

• Specifically designed for Vibrant 2.5" weld fittings
• Material: High-temperature FKM (Fluorocarbon) Rubber
• Resistant to aggressive chemicals, oils, and fuels
• Essential for maintaining a reliable, airtight seal
• Manufacturer Part Number: 12545R

Maintain system integrity with this genuine Vibrant Performance replacement O-ring (MPN 11493R), specifically engineered as a direct service component for Vibrant part number 11493. When servicing performance plumbing or mechanical assemblies, using the correct material-spec seal is critical to prevent leaks and pressure drops.

This O-ring is constructed entirely from high-grade FKM rubber (commonly known as Viton), providing exceptional thermal stability and resistance to aggressive chemicals, fuels, and oils. Unlike standard nitrile seals, FKM is designed to withstand the elevated temperatures and harsh fluids often found in high-performance automotive environments.

• Manufacturer Part Number: 11493R
• Material: FKM (Viton) Rubber
• Direct Replacement: Fits Vibrant Performance Part #11493
• Properties: Superior heat and chemical resistance for reliable sealing

Maintain a secure, leak-free seal with this authentic Vibrant Performance replacement O-ring. Manufactured from high-grade FKM rubber (Viton), this O-ring is engineered to withstand extreme heat and aggressive automotive fluids that would degrade standard nitrile seals. This is a direct service component for Vibrant clamp and flange assemblies, ensuring a precise fit and reliable performance in high-pressure environments.

• Material: FKM Rubber (Viton)
• Compatibility: Specifically fits Vibrant Part #11492 and Part #11492S
• Manufacturer Part Number: 11492R
• Performance: High resistance to temperature extremes and chemical exposure

Ensure a reliable, leak-free seal with the Vibrant Performance Replacement Viton (FKM) O-Ring. This specialized service component is designed specifically to fit Vibrant hardware part numbers 11491 and 11491S, making it an essential item for routine maintenance or system rebuilds.

Fabricated entirely from high-grade FKM (Viton) rubber, this O-ring provides superior resistance to high temperatures and aggressive automotive fluids compared to standard nitrile seals. This material choice ensures longevity and seal integrity in demanding engine bay environments.

• Direct replacement seal for Vibrant part numbers 11491 and 11491S
• Constructed from premium FKM (Viton) rubber for heat and chemical resistance
• Maintains critical sealing tolerances in high-performance applications
• Manufacturer Part Number: 11491R

The Radium Engineering Multi-Pump Fuel Surge Tank O-Ring Service Kit is a dedicated maintenance solution for refreshing the seals on your high-performance fuel system. Over time, heat cycles and various fuel additives can degrade original seals; this kit allows for a complete overhaul of the sealing surfaces to prevent leaks and maintain consistent fuel pressure. It is highly recommended to replace these O-rings whenever the surge tank is opened for pump inspection or fuel pump upgrades.

• Direct replacement for O-rings used in Radium Engineering Multi-Pump Fuel Surge Tanks
• Ensures a leak-free seal between the tank body and the pump hanger assembly
• High-grade elastomer construction compatible with gasoline and ethanol-based fuels
• Essential for routine maintenance and long-term fuel system reliability
• Manufacturer Part Number: 20-0088

The Radium Engineering Fuel Surge Tank O-Ring Service Kit (20-0087) provides the essential replacement seals required to maintain the integrity of your fuel system. These O-rings are designed to replace worn or degraded seals within the surge tank assembly, preventing leaks and ensuring consistent fuel pressure during high-performance driving. This kit is ideal for routine maintenance or when reassembling a tank after inspection or component upgrades.

• Direct replacement O-rings for Radium Engineering Fuel Surge Tanks
• Restores a leak-free seal to prevent fuel starvation and pressure loss
• Constructed from fuel-resistant elastomers for long-term durability
• Essential for service intervals or system rebuilds
• Manufacturer Part Number: 20-0087

Maintain the sealing integrity of your fluid management system with the Radium Engineering Catch Can O-Ring Service Kit (20-0057). This kit is designed specifically for standard 8oz Radium Engineering catch cans, providing the essential replacement seals required when performing routine maintenance or cleaning the internal filtration media.

Exposure to heat cycles and oil contaminants can cause rubber seals to harden or compress over time, potentially leading to vacuum leaks or vapor seepage. Replacing these O-rings ensures the catch can remains fully sealed, maintaining the pressure differential necessary for efficient oil separation in both naturally aspirated and forced induction applications.

• Direct replacement for Radium Engineering standard 8oz catch cans
• Restores airtight sealing between the can body and top assembly
• High-quality elastomer construction for oil and heat resistance
• Ideal for use during annual maintenance or catch can teardowns
• Manufacturer Part Number: 20-0057