Fits 2004 Ford F-150 (FX4, Lariat, STX, XL, XLT).

The Fabtech Drive Line Spacer is engineered to correct driveline geometry issues common after installing a suspension lift. Lifting a vehicle increases the distance between the transmission output and the rear differential, often resulting in insufficient spline engagement at the slip yoke. This spacer installs into the driveline to restore critical spline contact, ensuring the drivetrain can safely manage torque loads without excessive wear.

By extending the reach of the driveshaft, this component also helps restore the proper driveline operating angle. This correction is essential for eliminating high-speed vibrations and protecting universal joints, transmission seals, and differential bearings from premature failure.

• Restores proper driveline angle after lifting a vehicle
• Increases spline contact at the slip yoke for improved durability
• Helps eliminate drivetrain-induced vibrations
• Precision-engineered for 2004 Ford F-150 models

Fits 2017 Ford F450 and F550 4WD Diesel trucks.

This Fabtech 6-inch coil spring kit is engineered to provide front-end lift while handling the significant weight of a Ford Power Stroke Diesel engine. These heavy-duty springs ensure your Super Duty maintains proper ride height and suspension travel, delivering a controlled ride both on the highway and over rough terrain. They are designed specifically for use as part of Fabtech 6-inch suspension systems, ensuring correct geometry and component alignment.

• Provides 6 inches of front suspension lift
• Calibrated specifically for the weight and load requirements of Diesel models
• Constructed from high-quality steel for long-term resistance to sagging
• Direct replacement springs for use with Fabtech PN K2282, K2282M, K2282DL, K2284, K2284M, and K2284DL lift systems

Fits 2005-2008 Ford F-250 and F-350 Super Duty 4WD (FX4, Harley-Davidson, King Ranch, Lariat, XL, and XLT).

This Fabtech 6-inch Lift Kit Component Box serves as the structural foundation for your Super Duty suspension upgrade. Precision-engineered to maintain correct suspension geometry at increased ride heights, this box includes the heavy-duty brackets and specialized hardware required to ensure your truck remains stable and alignable. Constructed from high-grade materials and finished for maximum durability, these components are designed to withstand the stress of off-road environments while preserving drivetrain integrity.

• Specifically engineered for 6-inch suspension lift applications
• Corrects suspension geometry to maintain handling and alignment
• Includes heavy-duty mounting brackets and high-strength hardware
• Compatible with 2005-2008 Ford Super Duty 4WD platforms
• Required for the assembly of a complete Fabtech 6-inch lift system

Note: This is a component box only; additional parts are required to complete the full suspension installation.

Fits 1995-2004 Toyota Tacoma Base, DLX, Limited, Pre Runner, S-Runner, and SR5 models (V6 / 6-Lug / 2WD & 4WD).

This Fabtech Performance System delivers a full 6-inch lift for the first-generation Tacoma, engineered to provide significant ground clearance while maintaining the integrity of the vehicle's factory suspension geometry. Unlike many long-travel kits, this system is designed to retain your factory steering centerlink and upper control arms, ensuring predictable handling and simplified maintenance. The kit is specifically engineered to increase caster, providing improved steering control and stability on both 2WD and 4WD configurations.

• 6-inch suspension lift provides clearance for larger tire and wheel combinations
• Includes Fabtech Performance Shocks for enhanced damping and ride quality
• Retains factory steering centerlink and upper control arms
• Increased caster for improved steering feedback and control
• Quick no-weld installation design for straightforward setup
• No driveshaft modification required for Auto Trac systems
• Compatible with factory tires and wheels

Fits 2005-2022 Toyota Tacoma models.

This Fabtech tie rod end is a direct-fit replacement component designed to restore steering precision and alignment stability. As the critical link between the steering rack and the steering knuckles, the tie rod end is a primary wear item; when the internal joint develops play, it leads to vague steering feel, front-end vibration, and accelerated tire wear. Replacing worn OE components with this Fabtech unit ensures your Tacoma maintains predictable handling and tight steering response during both daily driving and off-road use.

• Direct replacement for factory tie rod ends to restore steering integrity
• Helps eliminate front-end wandering and steering wheel vibration
• Heavy-duty construction designed to maintain alignment settings under load
• Engineered for a precise fit with 2005-2022 Toyota Tacoma steering systems

Fits 2017 Ford F450 and F550 4WD Diesel models. This Fabtech rear block kit provides a reliable way to achieve 6 inches of rear lift, helping to level your vehicle's stance or provide the necessary clearance for larger tire and wheel combinations. Engineered for straightforward installation, these blocks integrate with the factory spring pack to maintain suspension geometry while increasing ride height.

This kit is specifically designed for use with Fabtech lift systems and serves as a critical component for the budget-minded enthusiast looking for a high-quality suspension solution without unnecessary complexity.

• Lift Height: 6 inches
• Position: Rear
• Compatible with Fabtech Systems: K2282, K2282M, K2282DL, K2283DL, K2284, K2284M, K2284DL, and K2285DL
• Application: 4WD Diesel models only

Fits 2010-2024 Toyota 4Runner models including SR5, Limited, TRD Off-Road, and TRD Pro.

This Fabtech rear lift box kit is engineered to provide a 6-inch height increase for the rear of your vehicle. Designed specifically for 4WD applications, this kit is a mandatory component for completing several Fabtech suspension systems. It utilizes heavy-duty rear lift blocks to achieve the necessary clearance for larger tire and wheel combinations while maintaining appropriate suspension geometry.

• Provides 6 inches of rear suspension lift
• Durable block kit construction for consistent ride height
• Required for Fabtech part numbers: K7059M, K7060DL, K7061DL, K7059, K7066, K7066M, K7067DL, and K7068DL
• Designed for seamless integration with Fabtech 4Runner lift systems

Fits 2017-2026 Ford F-250 and F-350 Super Duty 4WD models.

This Fabtech 4-inch coilover conversion upgrades your Super Duty's front suspension by replacing traditional coil springs with high-performance Dirt Logic coilovers. Engineered for a streamlined installation, the system utilizes the factory coil spring buckets to mount the shocks without extensive modification. Each Dirt Logic coilover is built to withstand harsh environments, featuring a stainless steel body and a NitroSteel piston rod for superior corrosion resistance and long-term durability.

• Lift Height: 4 inches
• Series: Dirt Logic
• Shock Body: Stainless steel construction for maximum corrosion resistance
• Piston Rod: NitroSteel material prevents pitting and wear
• Mounting: Direct-fit design utilizes factory coil spring buckets
• Application: Specifically tuned for Ford F-250/F-350 4WD platforms

Fits select 2000-2005 Ford Excursion and 2001-2004 F-250/F-350 Super Duty (2WD).

This Fabtech Component Box is the core hardware package for 2WD Ford Super Duty and Excursion 4-inch and 6-inch Basic System suspension lifts. Developed through rigorous testing and precision engineering, this box includes the necessary brackets and components to facilitate a reliable lift while maintaining proper suspension geometry and performance on and off the road.

• Specifically designed for 2WD drivetrain configurations
• Compatible with Fabtech 4-inch and 6-inch Basic Systems
• Heavy-duty fabrication for long-term durability and structural integrity
• Ensures proper fitment and alignment capability after lifting
• Includes necessary hardware for the basic system installation

Restore steering precision and maintain consistent wheel alignment with a Fabtech steering tie rod. As a critical link between your steering gear and the knuckles, this tie rod is engineered to handle the increased stresses associated with larger tires and modified suspension geometries. Whether you are replacing a bent factory unit or upgrading for off-road durability, Fabtech components provide the structural integrity required for reliable handling.

• Direct-fit replacement for worn or damaged steering tie rods
• Engineered to maintain proper toe settings and alignment stability
• Durable construction designed to withstand off-road terrain and daily driving
• Helps eliminate steering play and restores original road feel

Fits select 2008-2026 Ford F-250 and F-350 Super Duty 4WD models (XL, XLT, Lariat, King Ranch, Platinum, and Limited).

Fabtech extended-length coil springs are engineered to provide a true 4-inch lift for your Super Duty while maintaining proper front suspension geometry and ride quality. These heavy-duty springs replace the factory coils to accommodate larger wheel and tire packages, ensuring your truck remains level and stable under various driving conditions. By increasing the coil length, these springs provide the necessary clearance without compromising the spring rate required for heavy-duty truck applications.

• Provides 4 inches of front suspension lift
• Maintains factory suspension geometry and ride characteristics
• Direct replacement for OEM front coil springs
• Designed specifically for 4WD Ford Super Duty platforms
• Compatible with Fabtech lift systems: K2215, K2215M, K2212M, K2214, K2214M, K2216, K2216M, K2215DL, K2216DL, K2210M, K2211, K2211M, K2211DL, K2210, K2212, K2212DL, and K2210DL

Fits 2015-2024 Toyota 4Runner 4WD (SR5, Limited, TRD Pro, TRD Off-Road, Trail, and Venture models).

This Fabtech Component Box 1 is a foundational element of the 6-inch lift system for the Toyota 4Runner. Engineered with over 20 years of suspension design experience, Fabtech utilizes state-of-the-art software and rigorous testing to ensure proper suspension geometry and a trouble-free installation. This kit provides the heavy-duty components necessary to begin your 6-inch suspension lift, delivering the clearance needed for larger tires and improved off-road capability without sacrificing ride quality.

• Part of a complete 6-inch lift system for 2015-2024 4Runner 4WD models
• Precision-engineered for proper suspension geometry and performance
• Manufactured from high-grade materials for long-term durability
• Developed through extensive research and rigorous testing
• Note: This is Component Box 1 only; other boxes and parts are required for a complete lift kit installation

Restore the integrity of your suspension system with this Fabtech Bushing and Sleeve Kit. Over time, suspension bushings and sleeves can wear out or perish, leading to excessive play, clunking noises, and compromised wheel alignment. This kit is designed to refresh your suspension's pivot points, ensuring smooth articulation and consistent handling performance under load.

• Direct replacement for worn components in Fabtech suspension systems
• Engineered to reduce noise, vibration, and harshness (NVH)
• High-density bushing material for increased durability over standard rubber
• Precision-machined sleeves for a secure, low-friction fit within pivot housings
• Helps eliminate steering wander and restores precise suspension geometry

Fits 1988-2016 Chevrolet Blazer, K1500, and Tahoe; GMC K1500; Ford F-150; and Hummer H2. The Fabtech Stealth Series is a performance-oriented monotube shock absorber designed to provide a superior ride for trucks and SUVs equipped with oversized tires.

Constructed with a 50mm OD seamless steel body, the Stealth series utilizes a 46mm high-flow piston and vehicle-specific valving to maintain consistent damping control. The internal design features a full floating piston that separates the nitrogen gas charge from the oil, preventing aeration and shock fade during heavy use. For maximum durability, the 14mm piston rod is nitrocarburized rather than chromed, offering increased resistance to rock chips and corrosion.

• 46mm high-flow piston for consistent ride quality
• 14mm Nitrocarb piston rod resists rust and debris damage
• 50mm OD seamless steel body for increased oil capacity
• Full floating piston prevents oil foaming and fade
• All-black finish with raised metal nameplate
• Specifically tuned for vehicles with larger wheel and tire packages

Maintain the performance and longevity of your suspension with the Fabtech 2.25" Reservoir Shock Absorber Rebuild Kit. Engineered specifically for Fabtech 2.25-inch diameter shocks equipped with external reservoirs, this kit provides the essential internal components needed to refresh your dampers and restore factory-level sealing.

Exposure to heat, debris, and high-frequency cycling eventually degrades internal seals, which can lead to fluid leaks or nitrogen pressure loss. This service kit allows for a complete internal overhaul, ensuring your shocks maintain consistent damping characteristics during off-road use. Using high-grade materials for precise fitment, this kit is an essential part of a regular maintenance schedule for high-performance shocks.

• Fits Fabtech 2.25-inch diameter reservoir shock absorbers
• Includes all necessary replacement O-rings
• Includes high-grade replacement seals
• Designed to restore internal sealing and damping consistency
• Service-ready components for professional or DIY rebuilds

Fits 2003-2009 Hummer H2 4WD models equipped with rear coil springs.

The Fabtech 6-inch Performance System is a comprehensive suspension solution designed to provide significant ground clearance while maintaining the Hummer H2's factory steering geometry and ride quality. This kit includes Fabtech Stealth shocks, which feature a monotube design for consistent dampening performance over varied terrain. Engineered as a bolt-on solution, this system requires no welding for installation and preserves critical OE components like the steering centerlink and upper control arms.

• 6-inch lift height for increased ground clearance and larger tire fitment
• Includes Stealth series monotube shocks for improved ride control
• Retains factory steering centerlink and upper control arms to preserve geometry
• Increased caster built-in for improved highway tracking and steering feel
• No driveshaft change required for vehicles with Auto Trac transfer cases
• Compatible with factory stock tires and wheels
• Straightforward, no-weld installation

Fits select 2017-2026 Ford F-250 and F-350 Super Duty 4WD Diesel models with a 4-inch lift system.

The Fabtech Dirt Logic 4.0 Coilover Conversion is designed to upgrade Super Duty suspension systems, delivering superior damping capacity for rugged off-road terrain while significantly improving street ride quality. Engineered for longevity in harsh environments, this 4-inch lift coilover features a stainless steel body for maximum corrosion resistance and a NitroSteel piston rod for increased durability over standard chrome shafts.

This passenger-side specific unit is a direct bolt-on installation for vehicles already equipped with Fabtech Tubular Radius Arm or 4-Link systems. It provides the fine-tuned suspension control required for heavy-duty diesel applications.

• Part Number: FTS835242P
• 4.0-inch diameter stainless steel shock body
• Large external reservoir for increased oil capacity and cooling
• NitroSteel piston rod for superior corrosion resistance
• Bolt-on installation to factory mounting points
• Manufacturer 5-year, 60,000-mile warranty

Fits 2017-2026 Ford F-250 and F-350 Super Duty 4WD Diesel models equipped with a 4-inch lift.

The Fabtech Dirt Logic 4.0 Coilover Conversion is engineered to provide superior damping capacity and ride quality for heavy-duty applications. This driver-side reservoir coilover replaces the factory coil spring and shock assembly, offering a significant upgrade for both highway comfort and off-road performance. Each unit is constructed with a 4-inch diameter stainless steel body and a NitroSteel piston rod to ensure maximum corrosion resistance and durability in harsh environments.

• 4.0-inch diameter stainless steel body for high oil capacity and cooling
• NitroSteel piston rod provides superior strength and corrosion resistance
• External reservoir design for consistent performance during aggressive use
• Direct bolt-on installation for compatible 4-inch lift systems
• Designed specifically for Ford Super Duty 4WD Diesel applications
• Manufacturer Part Number: FTS835242D
• Backed by Fabtech's 5-year/60,000-mile warranty

Restore the ride quality and handling precision of your vehicle with the Fabtech Bushing Kit (FT90086). Over time, suspension bushings are subject to extreme friction, heat, and environmental debris, which can lead to cracking, compression, and excessive play. This kit is engineered to replace those worn components, ensuring your suspension maintains proper alignment and geometry during both on-road and off-road driving.

• Direct replacement for specific Fabtech suspension system bushings.
• Designed to eliminate suspension noise, clunks, and vibration caused by degraded rubber or poly components.
• Constructed for durability and resistance to grease and road salt.
• Includes high-quality replacement bushings for a service-ready installation.
• Manufacturer Part Number: FT90086

Fits 2021-2023 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Limited, Tremor, and Raptor.

The Fabtech FTS22334 Intrusion Beam Kit is designed for F-150 owners who require additional wheel well clearance for larger tire and wheel combinations. By replacing or modifying the factory intrusion beams (crash bars), this kit allows for aggressive off-road fitments while maintaining the structural integrity of the front chassis. Engineered using advanced fabrication software, these beams are built to withstand the rigors of both daily driving and off-road use.

• Specifically engineered for 2021-2023 Ford F-150 2WD and 4WD models
• Provides necessary clearance for oversized tires and wider offset wheels
• Heavy-duty steel construction for maximum durability
• Direct fitment based on OEM mounting specifications
• Manufacturer Part Number: FTS22334

Restore suspension stability and eliminate front-end noise with the Fabtech Front Sway Bar End Link Bushing Kit (FTS1126). Over time, factory bushings degrade due to environmental exposure and mechanical stress, leading to increased body roll and clunking sounds. This kit provides the necessary components to refresh your sway bar links, ensuring proper articulation and handling performance.

Designed for durability and precise fitment, these bushings replace worn OE units to tighten up the connection between the sway bar and the control arm. This kit comes complete with the high-strength hardware required for a secure installation, making it a reliable solution for maintaining your vehicle's suspension geometry.

• Direct replacement for worn or damaged front sway bar end link bushings
• Reduces excessive body roll and improves steering response
• Includes high-quality bushings and high-strength mounting bolt
• Engineered for long-term durability under standard and high-load conditions
• Manufacturer Part Number: FTS1126

Fits select 2017-2026 Ford F-250 and F-350 Super Duty 4WD models.

Correct the factory nose-down rake of your Ford Super Duty with the Fabtech 2" Leveling System. Designed specifically for 4WD applications, this kit provides additional front-end lift to accommodate larger tires and wheels while maintaining a factory-quality ride. Fabtech engineers these systems to ensure they do not cause ball joint, tie rod, or steering bind, even at the full height of the lift.

Built for durability, the kit utilizes high-strength 1/4-inch thick steel and aircraft-grade billet aluminum components. All steel parts are finished in a heavy-duty powder coating to resist corrosion in harsh environments. This system also qualifies for Fabtech’s 5-year / 60,000-mile powertrain warranty and their unique Trade Up program, allowing you to credit the cost of this kit toward a full Fabtech suspension system in the future.

• Provides 2 inches of front lift for a level stance
• Constructed from 1/4" thick steel and aircraft-grade billet aluminum
• Powdercoated finish for maximum corrosion resistance
• Includes high-grade installation hardware
• Engineered to prevent steering and ball joint bind
• Manufacturer Part Number: FTL5208
• Includes Fabtech's 5-Year / 60,000-Mile Powertrain Warranty

Maintain the stability and ride quality of your suspension system with the Fabtech Impact Strut Bushing Kit (FT1044). This kit is designed as a direct replacement for worn or degraded bushings within Fabtech impact strut assemblies, which serve to brace the front suspension crossmembers to the vehicle frame. By replacing perished bushings, you restore the intended rigidity and dampening characteristics of your lift kit.

Impact struts are critical for managing longitudinal forces during hard braking and off-road articulation. Over time, bushings can develop play or crack due to environmental exposure and mechanical stress, leading to suspension noise and alignment shifts. This hardware kit ensures your impact struts remain securely mounted and free of excessive vibration.

• Brand: Fabtech
• Part Number: FT1044
• Product Type: Impact Strut Bushing Kit
• Function: Restores suspension bracing and dampens road vibration
• Fitment: Designed for use with Fabtech Impact Strut assemblies

Fits 2015-2024 Toyota 4Runner 4WD models (SR5, Limited, TRD Off-Road, TRD Pro, Trail, and Venture).

The Fabtech K7066 6-inch Basic System is engineered for the 4Runner owner looking for maximum ground clearance and room for oversized tires without compromising structural integrity. Designed for the budget-minded enthusiast, this kit provides a complete suspension lift solution by utilizing heavy-duty components and precision-engineered brackets to maintain proper suspension geometry. The system includes Fabtech Performance Shocks, which are specifically valved for this application to provide a controlled ride on the street and reliable damping during off-road use.

• 6-inch lift height for increased ground clearance and larger tire fitment
• Includes Fabtech Performance Shocks for improved damping and ride quality
• High-strength construction utilizing state-of-the-art CAD design and fabrication
• Engineered to utilize stock components where possible for a straightforward installation
• Manufacturer Part Number: K7066

Fits 1995-2004 Toyota Tacoma Base and 1998-2003 Pre Runner models (2WD with 5-lug configuration).

This Fabtech 3-inch Spindle Lift System provides a precise solution for lifting and leveling your 2WD Toyota Tacoma. At the core of the system is a pair of heavy-duty cast replacement spindles designed to bolt directly into the factory location for a straightforward installation. By maintaining the stock suspension geometry, this kit provides additional ground clearance while preserving ride quality.

The system includes Fabtech Performance Shocks, specifically valved to work with the increased height and larger tire packages. To ensure proper fitment and safety, the kit comes complete with extended front brake lines and integrated steering stops. The rear is leveled using a shackle system, resulting in a balanced, aggressive stance.

• Manufacturer Part Number: K7014
• 3-inch front lift via cast replacement spindles
• Direct OE spindle replacement for simplified install
• Includes front steering stops and extended brake lines
• Rear shackle system included to level the vehicle
• Fabtech Performance Shocks provided for improved damping control

Fits 2003-2009 Hummer H2 Base models equipped with 4WD and rear coil springs.

The Fabtech K5000 Performance System provides a 6-inch lift for the Hummer H2, engineered to improve off-road clearance without sacrificing daily drivability. This system is designed to retain the factory steering centerlink and upper control arms, preserving critical suspension geometry. The kit features a quick, no-weld installation and is compatible with Auto Trac systems without requiring a driveshaft change. With increased caster for better steering control, this system provides a stable, predictable ride on oversized tires while allowing for the use of stock wheels if necessary.

• 6-inch lift height for maximum ground clearance
• Includes Fabtech Performance Shocks for improved damping
• Specifically designed for 4WD models with rear coil springs
• Retains factory steering centerlink and upper control arms
• No driveshaft modification required for Auto Trac models
• Quick, no-weld installation maintains structural integrity
• Increases caster for enhanced steering feel and control
• Manufacturer Part Number: K5000

Fits select 2000-2003 Ford F-250 Super Duty, F-350 Super Duty, and Excursion (2WD).

The Fabtech 6-inch Basic System is engineered for the budget-minded enthusiast looking to increase ground clearance and accommodate larger tires without compromising daily drivability. This kit is specifically designed for 2WD models and utilizes the vehicle's factory radius arms to simplify installation while maintaining front-end geometry. It provides a complete solution to achieve a full 6 inches of lift for a more aggressive stance and improved off-road presence.

This system features Fabtech Stealth shocks, which utilize a monotube design for superior heat dissipation and consistent damping performance across varying terrain. Every component is developed using advanced software and rigorous testing to ensure long-term reliability and a precise fit on Ford heavy-duty chassis platforms.

• Manufacturer Part Number: K2100M
• Lift Height: 6 Inches
• Shock Series: Stealth Monotube
• Drivetrain: 2WD Only
• Installation: Retains factory radius arms for efficient setup
• Includes all necessary hardware for a complete installation

Fits select 2000-2005 Ford Excursion and 2001-2004 Ford F-250/F-350 Super Duty 2WD models. This Fabtech K2100 Basic System is engineered for owners looking to increase ride height and fit larger tires without compromising suspension integrity.

By utilizing the vehicle's factory I-beams and radius arms, this system uses heavy-duty 1/4-inch thick brackets to relocate these critical components. The kit includes extended length coil springs that provide a full 6 inches of lift while maintaining proper front-end geometry. To ensure steering remains precise, a drop pitman arm is included to correct the drag link angle. This comprehensive kit also features front and rear Fabtech Performance Shocks, valved specifically for this application to improve ride quality on and off the pavement.

• Manufacturer Part Number: K2100
• Lift Height: 6 Inches
• Relocation brackets constructed from 1/4-inch thick steel for maximum durability
• Maintains factory radius arm configuration for simplified installation
• Extended length front coil springs for increased ground clearance
• Includes front and rear Fabtech Performance Shocks
• Drop pitman arm included for proper steering geometry
• Rear block kit provides a leveled stance

Fits 1999-2000 Ford F-250 and F-350 Super Duty 2WD models (7.3L Diesel).

The Fabtech 6-inch Basic Suspension System is a comprehensive lift solution designed for the budget-minded enthusiast who demands reliable off-road performance. This system provides the necessary height to clear larger wheel and tire combinations while utilizing the factory radius arms to maintain suspension geometry. To ensure consistent ride quality and control, the kit includes Fabtech Stealth shocks, which feature a monotube-style design for superior heat dissipation during heavy use.

• Lift Height: 6 inches
• Shock Series: Stealth
• Drive Type: 2WD only
• Suspension Design: Utilizes stock radius arms for simplified installation
• Engine Compatibility: 7.3L Diesel
• Finish: Black powder coat for corrosion resistance
• Manufacturer Part Number: K2099M

Fits 1999-2000 Ford F-250 and F-350 Super Duty 2WD models (7.3L Diesel).

The Fabtech 6-inch Basic Lift System is engineered to increase ground clearance and ride height while maintaining proper front suspension geometry. By utilizing the vehicle's stock I-beams and radius arms, this system provides a cost-effective lift solution without sacrificing structural integrity. The kit features heavy-duty 1/4-inch thick steel brackets to relocate factory components and extended length coil springs for a balanced lift.

This comprehensive kit includes Fabtech Performance Shocks for all four corners, tuned to provide a controlled ride on and off the road. To ensure correct steering geometry after lifting, a drop pitman arm is included, along with a rear block kit to level the stance.

• Lift Height: 6 Inches
• Fits 2WD models with 7.3L Diesel engine
• Heavy-duty 1/4-inch thick relocation brackets
• Extended length front coil springs
• Utilizes factory I-beams and stock radius arms
• Front and rear Fabtech Performance Shocks included
• Includes drop pitman arm and rear block kit
• Manufacturer Part Number: K2099