Fits 2007-2024 Dodge Ram and Ram 2500/3500 (6.7L). This all-in-one upgrade kit addresses the common failures and installation complexities of the factory grid heater system. Fleece Performance engineered this kit to be a comprehensive solution, providing everything needed for a complete installation without requiring proprietary high-pressure fuel lines—allowing you to reuse your OE lines or standard aftermarket replacements.

Safety and reliability are prioritized with heater cables and connections that feature integrated protective boots to eliminate the risk of accidental contact with energized circuits. To simplify the installation process, all hardware is clearly labeled and organized, and electrical connections are marked to ensure correct routing. This kit covers both pickup and Chassis Cab (C&C) models.

• Manufacturer Part Number: FPE-CUMM-IHK-0724
• Includes gaskets for: intake runner, intake horn, throttle valve, EGR valve, and EGR crossover tube
• Protective boots on all heater connections
• Labeled hardware kits and electrical connections
• Compatible with factory or direct replacement high-pressure fuel lines
• One kit design covers full 2007-2024 6.7L Cummins applications

Fits 2019-2024 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins diesel engine.

Standard plastic coolant reservoirs are prone to heat-cycling fatigue and eventual leaks. This Fleece Performance fabricated aluminum tank is a durable direct replacement that significantly improves engine bay aesthetics and durability. The slim profile provides additional clearance around the turbocharger, making it an ideal choice for trucks with aftermarket turbo setups or those looking to clean up the passenger-side engine compartment.

This tank is powder-coated in a gloss black finish and includes a new low-coolant float switch designed to plug directly into the factory wiring harness. It mounts securely in the factory location behind the passenger-side battery using the provided hardware and requires no permanent vehicle modifications.

• Fabricated aluminum construction with gloss black powder coat finish
• Includes integrated low-coolant float switch (plug-and-play with OE harness)
• Retains use of the factory coolant tank cap
• Direct replacement for MOPAR 68370066AC
• Includes mounting hardware, hose, heat wrap, and hose clamps
• Designed for clearance around large-frame turbochargers

Secure your turbocharger with the Fleece Performance Stainless Steel Turbo Stud Kit, specifically engineered for S-300 and S-400 series turbos. Unlike standard hardware that becomes brittle and seized after repeated heat cycles, these studs are manufactured in the USA from aged 630 stainless steel. This premium material choice ensures they remain impervious to rust and corrosion while providing the superior clamping force required for high-performance forced induction setups.

Installation is simplified via a integrated 4mm internal hex head, allowing you to seat the studs easily in the manifold even in tight engine bays. Designed to accommodate turbo flanges up to 3/8-inch thick, this kit provides a professional, long-lasting mounting solution that won't degrade over time.

• Manufactured from aged 630 stainless steel for maximum strength and corrosion resistance
• Integrated 4mm internal hex head for easy installation and seating
• Supports a maximum turbo flange thickness of 3/8"
• Specifically designed for BorgWarner S300 and S400 frame turbochargers
• Proudly made in the USA
• Manufacturer Part Number: FPE-34856

Note: A hot re-torque is required after the initial heat cycle to ensure consistent clamping pressure and a leak-free seal.

Fits select 2020-2024 Chevrolet Silverado and GMC Sierra 2500/3500 HD Short Bed models (6.6L L5P Duramax).

The Fleece Performance L5P fuel filter upgrade kit converts the factory cartridge-style filter to a more efficient spin-on canister style. This conversion increases filtration capacity and allows for extended service intervals while providing access to more filter options. The kit features a precision-machined, anodized billet aluminum fuel filter base designed to install in the factory location for a seamless upgrade.

This upgraded base is engineered for a perfect fit, retaining the original equipment (OE) sandwich-style heating element and utilizing quick-disconnect fittings to maintain factory-quality fuel line connections. This kit is specifically designed for 2020-2024 GM trucks equipped with a short bed, providing an OE-quality fit and finish without sacrificing system functionality.

• Direct replacement for stock cartridge-style filter base
• Constructed from high-strength anodized billet aluminum
• Integrated mounting and distribution filter block/coupler
• Retains factory heating element functionality
• Includes Donaldson fuel filter and water separator
• US Patent No. D978,917
• Manufacturer Part Number: FPE-L5P-FFBA-20
• Cross-Reference: Replaces GM Part # 13543066, 13539109, 364721126

Kit Includes: Donaldson fuel filter/water separator, filter base with integral mounting, distribution filter block/coupler, and quick-disconnect fittings.

Fits select 2010-2018 Dodge and Ram 2500 and 3500 trucks (5.9L / 6.7L).

The Fleece Performance 4th Gen Fuel Filter Delete is an essential upgrade for Cummins owners running high-flow aftermarket filtration systems like an Air Dog or FASS. Once an external system is in place, the factory fuel filter housing becomes a redundant restriction and a source of engine bay clutter. This delete block removes that bottleneck, improving flow and cleaning up the under-hood environment.

Designed for a direct-fit installation, this block mounts perfectly to allow the use of factory fuel return lines without the need for bending or relocating. It features a dedicated port for the factory Water In Fuel (WIF) sensor and a 9/16-18 O-ring port to accommodate a dual CP3 return line, making it a versatile solution for both street and high-performance builds.

• Manufacturer Part Number: FPE-FFD-RO-4G
• Removes factory fuel filter restriction
• Retains factory fuel return line positioning
• Integrated port for factory WIF (Water in Fuel) sensor
• 9/16-18 O-ring port for dual CP3 return applications
• Kit Includes: Fuel filter delete block, replacement banjo washers, WIF sensor port, 9/16-18 O-ring port plug, and M14x2.0 WIF sensor plug

Fits select 2007-2018 Dodge and Ram 2500/3500 trucks equipped with the 6.7L Cummins diesel engine.

The Fleece Performance Exhaust Back Pressure (EBP) Relocation Kit allows you to move the sensitive EBP sensor from its factory location on the thermostat housing elbow to a cooler, more accessible mounting block on the front side of the radiator. This kit is essential for managing heat-related sensor wear and simplifies engine bay maintenance. It serves as a direct replacement for the relocation hardware found in the FPE-CLNTBYPS-CUMMINS-0712 coolant bypass kit.

• Relocates EBP sensor to cooler mounting location on the radiator
• Includes EBP sensor mounting block
• Includes exhaust manifold pressure feed tube
• Fits 6.7L Cummins engines from 2007-2018
• Manufacturer Part Number: FPE-CUMM-EBP-KIT-0712

Fits select 2003-2007 Ford E-350 Super Duty, E-350 Club Wagon, Excursion, and F-250/F-350 Super Duty models (6.0L / 6.4L).

The Fleece Performance Freedom Series HD Cylinder Head is engineered from the ground up to address the common failure points of factory 6.0L Powerstroke castings. Unlike standard remanufactured heads, these units utilize a proprietary higher tensile strength alloy casting with increased wall thickness in critical areas. This added material ensures superior durability under high-stress conditions and provides a long-lasting solution for your diesel engine.

For maximum combustion sealing, these heads feature a unique single-piece hoop style O-ring, eliminating the seams found in traditional stainless wire setups. The valve train is further enhanced with American-made, extreme-duty tungsten alloy valve seats, offering significantly higher wear resistance and stability compared to OEM components.

• Manufacturer Part Number: FPE-61-10011-HD
• 18mm dowel configuration for precise alignment
• High tensile strength alloy casting with reinforced walls
• Tungsten alloy valve seats for extreme heat and wear resistance
• Exclusive single-piece hoop style O-ring for a superior head gasket seal
• Note: Fleece recommends using 6.4L pushrods (Ford P/N 8C3Z-6565-B) to accommodate tolerance stack-up
• Note: Head gasket not included (Ford P/N KZ3Z-6051-B recommended)

The Fleece Performance Cummins Crankshaft Barring Tool (FPE-CCBT) is a specialized shop essential designed to simplify engine maintenance. This tool allows for precise, manual rotation of the crankshaft, which is necessary for performing valve lash adjustments, timing the fuel pump, or inspecting internal components. By engaging directly with the factory crank bolts and roll pins, it provides a secure connection that won't slip during use.

Fits select 1994-2018 Dodge Ram 2500 and 3500 models (5.9L / 6.7L).

• Manufactured from durable 1018 steel for maximum service life.
• Yellow zinc plated finish for high-level corrosion resistance in harsh shop environments.
• Accepts a standard 1/2-inch drive ratchet or breaker bar.
• Designed for permanent or temporary use; no need to remove the tool once installed.
• Compatible with factory crankshaft hardware including bolts and roll pins.
• Manufacturer Part Number: FPE-CCBT

Fits 2007-2009 Dodge Ram 2500 and 3500.

Maintain optimal transmission fluid temperatures and tow with confidence using the Fleece Performance Transmission Cooler and Line Kit. Engineered to replace the restrictive factory setup, this kit provides a massive 2X increase in heat rejection over the stock cooler, ensuring your transmission remains protected under heavy loads. This comprehensive cooling solution includes heavy-duty transmission lines and high-quality AN fittings to eliminate common leak points.

Designed as a true drop-in replacement, the Fleece Performance cooler mounts to factory locations without the need for cutting or splicing original equipment lines. Every unit is 100% pressure and leak tested at the factory for maximum reliability.

• Manufacturer Part Number: FPE-TC-CUMM-0709
• 2X increase in heat rejection and cooling efficiency vs. stock cooler
• Heavy-duty transmission lines and AN fittings for a leak-free seal
• Drop-in replacement for factory transmission cooler mounting
• No cutting or splicing of OE lines required
• 100% pressure and leak tested

Fits 2007-2018 Dodge Ram 2500 and 3500 models (6.7L).

When installing a new long block or performing a top-end refresh on your 6.7L Cummins, a complete seal is critical for reliability. This Fleece Performance upper gasket set (MPN: FPE-CUMM-0718-UPR-GS-NHG) provides a comprehensive solution for resealing your engine's top-end components. This kit is designed to meet or exceed OE specifications, ensuring professional-grade fitment and durability during high-pressure operation. Please note that this kit specifically excludes the head gasket.

This kit includes 60 individual components for a thorough service, featuring:

• 6 O-Ring Seals (OE Ref: 3977393)
• 6 Injector Seals (OE Ref: 3976371)
• 1 M22 O-Ring Seal (OE Ref: 3089240)
• 6 O-Ring Seals (OE Ref: 4062328)
• 1 Rocker Lever Housing Gasket (OE Ref: 3963379)
• 2 Lock Plates (OE Ref: 4933628)
• 2 O-Ring Seals (OE Ref: 3678603)
• 1 M18 O-Ring Seal (OE Ref: 3678786)
• 1 Thermostat Seal (OE Ref: 3954829)
• Set of 7 Connection Gaskets (OE Ref: 3949910, 3958716, 4940849, 4943533, 4933235)
• 1 Turbocharger Gasket (OE Ref: 3977338)
• 11 M12 Sealing Washers (OE Ref: 3963990)
• 6 Exhaust Manifold Gaskets (OE Ref: 3955339)
• 1 Intake Manifold Cover Gasket (OE Ref: 3947530)
• 1 Exhaust Outlet Connection Gasket (OE Ref: 4933225)
• 2 Exhaust Gas Recirculation (EGR) Valve Gaskets (OE Ref: 3979769)
• 1 Oil Drain Gasket (OE Ref: 5264568)

Fits 2007-2018 Dodge/Ram 2500 and 3500 (6.7L Cummins).

This Fleece Performance Upper Gasket Kit provides a comprehensive sealing solution for top-end engine repairs and head gasket replacements on the 6.7L Cummins platform. Designed to meet or exceed original equipment standards, this kit ensures a reliable, leak-free seal for critical engine components. Whether you are performing a routine service or a complete top-end rebuild, this kit includes the necessary gaskets to restore engine integrity and performance.

• Includes head gasket and essential upper engine seals
• Engineered for high-pressure diesel environments
• Direct replacement for factory gaskets
• Compatible with 2007.5 through 2018 model years
• Manufacturer Part Number: FPE-CUMM-0718-UPR-GS-KIT

Fits 2003-2007 Dodge Ram 2500 and 3500 trucks (Laramie, SLT, Sport, ST, TRX4).

Protect your transmission and tow with confidence using the Fleece Performance Transmission Cooler and Line Kit (FPE-TC-CUMM-0307). This system is engineered as a direct drop-in replacement for the factory unit, providing a massive 2X increase in heat rejection compared to the stock cooler. By significantly lowering fluid temperatures, this kit helps prevent thermal breakdown and extends the service life of your transmission during heavy-duty use.

The kit features heavy-duty transmission lines equipped with high-quality AN fittings, ensuring a leak-free, high-flow connection that replaces the prone-to-leak factory lines. Every unit is 100% pressure and leak tested to guarantee reliability in the most demanding towing environments.

• Direct drop-in replacement for OE transmission cooler
• Provides 2X more heat rejection than the factory cooler
• Heavy-duty transmission lines with leak-free AN fittings
• No cutting or splicing of factory lines required
• 100% pressure and leak tested for durability
• Manufacturer Part Number: FPE-TC-CUMM-0307

Fits 2003-2022 Dodge and Ram 2500/3500 equipped with the 5.9L or 6.7L Cummins turbo diesel engine.

Ensure a reliable, leak-free seal on your injector tubes and high-pressure injection lines with these premium fuel supply tube nuts from Fleece Performance. Manufactured from 300 series stainless steel, these high-tolerance nuts are designed to resist corrosion and provide a superior fit compared to standard hardware. Whether you are performing a routine injector service or building a high-pressure fuel system, these stainless nuts provide the durability and precision required for the Cummins common rail platform.

• Manufactured from 300 series stainless steel for maximum corrosion resistance
• High-tolerance machining ensures a precise seal on injector tubes and high-pressure lines
• Manufacturer Part Number: FPE-CUMM-SSFTN
• Replaces Cummins P/N: 5264181, 3946625, 4893739
• Replaces Mopar P/N: 5086866AB
• Replaces Bosch P/N: F00RJ00437

Fits 2004-2007 Ford F-250 and F-350 Super Duty (6.0L).

The Fleece Performance Cheetah Turbocharger is a high-performance, drop-in replacement designed to provide the spool-up of a small turbo with the top-end power of a much larger unit. Built with genuine Garrett components and updated internals, this 100% stock-appearing turbocharger supports up to 650 RWHP and safely handles 40 PSI of boost without requiring aftermarket modifications or custom plumbing.

At the heart of the Cheetah is a 63mm Forged Milled Wheel (FMW), which is stronger and lighter than traditional cast or billet wheels, resulting in faster throttle response and a broader torque curve. Combined with a 66mm Cheetah turbine wheel and Variable Nozzle Technology (VNT), this turbo offers seamless power delivery whether you are towing during the week or sled pulling on the weekend. The assembly features upgraded shaft bearings and a 360-degree thrust bearing for superior longevity under high-load conditions.

• 63mm FMW compressor wheel and 66mm high-flow turbine wheel
• No core charge required
• Rated for up to 650 RWHP and 40 PSI of boost
• 360-degree thrust bearings and upgraded shaft bearings
• 2.5" Work Stock legal competition compliance
• Retains all factory mounting points and systems
• Manufacturer Part Number: FPE-6.0STREET-0407

Fits 2001-2004 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD trucks equipped with the Allison 1000 or 2000 series transmission.

Restore the electrical integrity of your Allison transmission with the Fleece Performance NSBU (Neutral Start Back Up) replacement connector set. These connectors are a direct solution for damaged or corroded factory wiring at the transmission range switch, a common failure point that can lead to shifting issues or no-start conditions. Each pigtail features 6-inch leads produced using a fully automated wire cutting and terminal crimping process to ensure consistent, low-resistance connections that exceed manual repairs.

The kit is designed for a permanent, weather-tight installation by including high-quality heat-sealable butt-style connectors, protecting the splice from moisture and road debris. Whether you are performing a routine harness repair or troubleshooting transmission communication codes, this kit provides the professional-grade components required for a reliable fix.

• 6-inch wire pigtail leads for easy splicing
• Automated terminal crimping for maximum durability
• Includes heat-sealable butt connectors
• Direct replacement for 2001-2004 Allison 1000/2000 NSBU connectors
• Manufacturer Part Number: FPE-HAR-GM-NSBU-0104

Fits select 2013-2024 Ram 2500 and 3500 trucks (6.7L Cummins).

This Fleece Performance fuel rail pressure sensor pigtail is an essential repair solution for damaged or brittle factory wiring. Built to meet rigorous standards, the harness is manufactured in-house using fully automated wire cutting and terminal crimping processes to ensure precise electrical contact and long-term durability. Each pigtail includes heat-sealable butt-style connectors to provide a moisture-resistant seal, protecting the circuit from the harsh environment under the hood of your diesel truck.

• Direct replacement for damaged fuel rail pressure sensor harnesses
• Automated terminal crimping and wire cutting for OE-level reliability
• Includes heat-sealable butt connectors for a secure, weatherproof installation
• Compatible with 2013-2018 fuel rail pressure sensor 68210175AA
• Compatible with 2019-2024 fuel rail pressure sensor 68447763AA
• Manufacturer Part Number: FPE-HAR-CUMM-RP-SEN-PT

Simplify your coolant system plumbing with the Fleece Performance FPE-34258-A universal pre-formed hose kit. Designed to solve the routing challenges of custom engine builds and cooling system modifications, this 5/8" ID hose features molded 90-degree ends that maintain full flow without the kinking or collapsing common when using standard straight hoses in tight spaces.

This kit includes a heavy-duty T-fitting with a 1" ID main bore, providing a secure junction for integrating heater circuits, bypass lines, or expansion tanks. The pre-formed architecture ensures a professional, factory-style finish for any custom automotive cooling application where clean routing is a priority.

• Manufacturer Part Number: FPE-34258-A
• Hose Size: 5/8" Internal Diameter (ID)
• Ends: Dual pre-formed 90-degree bends
• Included Fitting: 1" ID T-Fitting
• Application: Universal coolant and heater hose routing

The Fleece Performance LSR Standard Deck Wet Aluminum Engine Block is a precision-engineered Gen V LT race block designed for maximum durability in high-horsepower applications. This American-made block utilizes a reinforced exoskeleton and Hot Isostatic Pressing (HIP) to deliver a high-density casting with minimal porosity. Engineered for competitive racing, it provides a significantly stronger foundation than factory blocks while maintaining full compatibility with OEM LT accessories.

Constructed with a minimum 0.625-inch skirt wall thickness and additional material added to the front and rear valley walls, this block provides superior structural integrity. The bottom end features an exclusive domed main cap design for enhanced crankshaft support, secured by premium billet caps with M10 main studs, side bolts, and inner stud dowels for exceptional clamping force and alignment.

• Manufacturer Part Number: FPE-LSR-SD10X
• Block Type: Gen V LT Standard Deck
• Material: HIP-processed aluminum with reinforced exoskeleton
• Main Caps: Billet steel domed caps with M10 studs, side bolts, and inner dowels
• Wall Thickness: Minimum 0.625" skirt walls
• Engineering: Added material to front and rear valley walls for increased rigidity
• Origin: Made in the USA

Fits select 2001-2016 GM 6.6L Duramax, 2003-2012 Cummins 5.9L/6.7L, and 2014-2015 Chevrolet Cruze models. This 6-inch pigtail connector provides a reliable solution for repairing damaged or corroded sensor wiring.

Manufactured in-house using a fully automated wire cutting and terminal crimping process, this replacement harness ensures precise tolerances and professional-grade electrical connectivity. It is designed to replace worn original equipment connectors for rail pressure sensors and select MAP sensor applications, helping you restore signal integrity and engine performance.

• Includes heat-sealable butt-style connectors for a secure, weather-resistant installation
• 6-inch pigtail length for flexible routing and splicing
• High-quality terminal crimping for long-term durability
• Replaces OE Part Number: 5143781AB
• Manufacturer Part Number: FPE-HAR-RP-PT

Application Notes: Specifically covers rail pressure sensors on 2003-2012 Cummins (5.9L/6.7L), 2001-2016 Duramax (6.6L), and 2014-2015 Cruze, as well as the MAP sensor on 2011-2016 6.6L Duramax engines.

Fits select 2013-2018 RAM (6.7L Cummins) and 2017-2024 GM (L5P Duramax) trucks.

The Fleece Performance Universal MAP Sensor and Airbox Control Valve Pigtail is a precision-engineered replacement connector designed to restore reliable electrical signals to critical engine sensors. This 6-inch pigtail addresses common wiring failures caused by corrosion or heat damage, particularly at the fuel rail pressure sensor and MAP sensor locations. To ensure factory-level reliability, each pigtail is manufactured in-house using fully automated wire cutting and terminal crimping for consistent, high-integrity connections.

This harness is the primary solution for Technical Service Bulletin (TSB) 20-NA-197, which addresses Malfunction Indicator Lamps (MIL) and fuel-system related Diagnostic Trouble Codes (DTCs). It effectively replaces worn or damaged OE connectors to get your truck back in service without the need for an entire harness replacement.

• Length: 6-inch pigtail for ample splicing room
• Applications: 2017-2024 L5P Fuel Rail Pressure, 2017-2022 L5P MAP Sensor, and 2013-2018 RAM 6.7L Cummins Airbox Solenoid
• DTC Support: Resolves P0087, P0089, P0191, P026C, P026D, P1089, P163A, P163B, P2293, P228A, P228B, and P228D
• OE Cross Reference: GM 85518225, 19367009, 19331705; ACDelco PT3744
• Manufacturer Part Number: FPE-HAR-MU-PT-7

This Fleece Performance Universal Multiuse Pressure Sensor Pigtail is a precision-engineered replacement connector designed for multiple sensor locations on Cummins, Duramax, Powerstroke, and GM platforms. Featuring 36-inch wire leads, this pigtail allows for clean routing and easy integration into the factory harness, particularly in tight engine bays.

Each harness is manufactured in-house using fully automated wire cutting and terminal crimping to ensure maximum electrical conductivity and durability. This pigtail is an ideal solution for repairing damaged or corroded MAP sensor connectors on 1998.5-2000 5.9L Cummins engines and other universal pressure sensor applications.

• Manufacturer Part Number: FPE-HAR-MU-PT-6
• Wire Length: 36-inch leads for flexible installation
• Cross-Reference: Replaces Cummins part 3824256
• Specific Fitment: 1998.5-2000 5.9L Cummins MAP Sensor (4921497)
• Included Hardware: Heat-sealable butt-style connectors for a weather-resistant repair
• Construction: Automated terminal crimping for long-term reliability

Fits select 1994-2022 Dodge, Ram, Chevrolet, and GMC 2500 and 3500 trucks.

The Fleece Performance Universal Multiuse 2-Pin Sensor Pigtail is a professional-grade solution for repairing damaged, brittle, or corroded factory wiring. This 6-inch pigtail is used across hundreds of applications on GM and Dodge/Ram platforms, providing a reliable replacement for critical sensors ranging from coolant temperature to transmission speed. Every pigtail is manufactured in-house using fully automated wire cutting and terminal crimping to ensure high-quality connections and long-term durability underhood.

• Length: 6-inch pigtail
• Connector: 2-pin multi-purpose
• Includes: Heat-sealable butt-style connectors for a weather-tight installation
• Interchange: Replaces Cummins part number 3823256
• MPN: FPE-HAR-MU-PT-5

Common Applications:

• 1998-2002 / 2004.5-2022 Cummins Coolant Temp Sensor
• 2003-2004 Cummins WIF (Water In Fuel) Sensor
• GM / Dodge Coolant Level and Transmission Speed Sensors
• GM Brake Fluid and Washer Fluid Level Sensors

Fits select 1995-2020 Dodge/Ram 2500 and 3500 trucks with Cummins diesel engines.

The Fleece Performance Multiuse Sensor Pigtail is a high-quality replacement connector designed to restore reliable electrical signals to critical engine and emissions components. Whether you are repairing a corroded terminal or a damaged harness, this 6-inch pigtail provides a secure, factory-style connection to prevent intermittent sensor data or fault codes.

This versatile pigtail is specifically used for several key Cummins applications depending on the model year, including the turbo actuator, throttle valve, and fuel sending unit. It is engineered to meet or exceed original equipment standards for fitment and durability.

• Manufacturer Part Number: FPE-HAR-MU-PT-4
• Replaces OEM Connector: 05013978AA
• Lead Length: 6 inches
• Common Applications:
  • Turbo Actuator: 2007.5-2012 RAM w/ Cummins
  • Throttle Valve: 2007.5-2010 RAM w/ Cummins
  • Fuel Sending Unit: 1995-2020 RAM w/ Cummins
  • DPF Delta Pressure Sensor: 2013-2018 RAM w/ Cummins

Fits select 1997-2019 Dodge and Ram 2500/3500 trucks with Cummins diesel engines.

Restore reliable electrical connections to your Cummins-equipped truck with the Fleece Performance Multiuse Sensor Pigtail 2. This 6-inch pre-wired connector is designed to replace brittle, heat-damaged, or corroded factory wiring harnesses. It is a direct-fit solution for multiple critical sensor applications, ensuring consistent signals for engine management and climate control systems.

• Oil Pressure Switch: 2002-2018 RAM w/ Cummins (replaces 56031005)
• A/C Compressor Switch: 1997-2012 RAM w/ Cummins
• EGR Temperature Sensor: 2007.5-2019 RAM w/ Cummins
• Mopar Cross-References: 5017117AA and 5019913AA
• Lead Length: 6 inches
• MPN: FPE-HAR-MU-PT-2

Fits 1999-2007 Ford F-250 and F-350 Super Duty.

The Fleece Performance FPE-HAR-MU-PT-15 is a high-quality replacement fuel sending unit connector designed to restore reliable electrical connections to your Ford Super Duty's fuel system. This 6-inch pigtail replaces a worn, corroded, or damaged OE connector, ensuring your fuel level and pump signals remain consistent and accurate. Produced in-house, Fleece Performance utilizes a fully automated wire cutting and terminal crimping process to ensure every lead meets precise tolerances for a long-lasting repair.

• 6-inch pigtail lead for easy integration into the factory harness
• Includes heat-sealable butt-splice connectors for a weather-resistant connection
• Precision-crimped terminals for maximum conductivity
• Replaces damaged or melted factory sending unit connectors
• Manufacturer Part Number: FPE-HAR-MU-PT-15

Fits select 1994-2016 Ford Powerstroke and GM Duramax trucks (7.3L / 6.0L / 6.6L). This Fleece Performance No. 10 Universal Multi-Use Sensor Pigtail provides a durable, high-quality solution for repairing damaged electrical connections on critical engine sensors and solenoids. Each 6-inch pigtail is manufactured in-house using fully automated wire cutting and terminal crimping processes to ensure consistent tension and electrical continuity, helping you resolve harness issues and get your vehicle back on the road.

• Direct replacement for AC Delco 12085496
• 6-inch wire leads for flexible installation and splicing
• Automated terminal crimping ensures maximum terminal-to-wire pull strength
• Designed for high-heat diesel engine environments
• Manufacturer Part Number: FPE-HAR-MU-PT-10

Fitment and Application Details:

• 1994-2003 Ford 7.3L Powerstroke: Injector Connector and IPR (Injection Pressure Regulator) Valve
• 2003-2010 Ford 6.0L Powerstroke: Turbo VGT Solenoid and IPR Valve
• 2004.5-2016 GM 6.6L Duramax (LLY/LBZ/LMM/LML): Turbo Vane Position Control Solenoid Valve

Fits select 2002-2009 Dodge Ram 1500, 2500, and 3500 trucks (V8 and Diesel applications; see fitment table for specific submodels).

This Fleece Performance replacement connector is engineered to restore reliable electrical signals to your vehicle's critical pressure sensors. Factory wiring harness connectors are frequently subject to heat cycles and environmental fatigue, resulting in brittle housings and terminal corrosion. This 6-inch pigtail provides a direct replacement solution for multiple MOPAR sensor locations, specifically for the A/C system and transmission transducers.

Produced in-house using a fully automated manufacturing process, including wire cutting and terminal crimping, this pigtail ensures consistent conductivity and long-term durability in heavy-duty environments. It is a direct fit for the MOPAR A/C pressure sensor 5073617AA and several common transmission pressure transducers.

• 6-inch wire pigtail for flexible installation and splicing
• Automated terminal crimping for maximum signal integrity
• Compatible with 45RFE, 545RFE, 65RFE, 66RFE, and 68RFE transmission transducers
• Replaces the connector for MOPAR A/C pressure sensor 5073617AA
• Manufacturer Part Number: FPE-HAR-MOPAR-PS-0209

Fits select 2003-2019 Ford, Lincoln, and GM vehicles, including F-150, F-250, Explorer, Silverado, and Tahoe.

The Fleece Performance Heated Seat Module Connector Pigtail (FPE-HAR-HSM-PT) provides a reliable solution for a common failure point on Ford and GM wiring harnesses. Instead of replacing the entire vehicle harness, this pigtail allows for a targeted repair of the heated seat module connection. Manufactured in-house, each pigtail undergoes fully automated wire cutting and terminal crimping to ensure precise electrical tolerances and consistent performance.

• Direct Replacement: Replaces Ford part number WPT928 (3U2Z14S411ZMB).
• Precision Manufacturing: Automated terminal crimping ensures a secure, low-resistance connection.
• Installation Ready: Includes heat-sealable butt-style connectors to protect the repair from moisture and corrosion.
• MPN: FPE-HAR-HSM-PT

This heavy-duty pigtail is designed to restore factory heated seat functionality to your truck or SUV with a component that meets or exceeds the durability of the original equipment.

Fits select 2004-2005 Chevrolet Silverado and GMC Sierra 2500 HD/3500 trucks equipped with the Allison 1000/2000 Series transmission.

Replace a corroded or damaged Neutral Safety Back Up (NSBU) switch connector with this Fleece Performance 6-inch pigtail. This replacement harness is engineered for durability and ease of installation, ensuring your transmission receives accurate gear position signals. Produced in-house, Fleece Performance utilizes fully automated wire cutting and terminal crimping processes to maintain strict tolerances and high reliability for demanding diesel applications.

This pigtail connects to the Allison Transmission NSBU 29541852 and includes the necessary hardware for a secure, moisture-resistant installation.

• 6-inch pre-crimped wire leads
• Includes heat-sealable butt-style connectors
• Connects to Allison NSBU part number 29541852
• Compatible with Allison 1000 and 2000 Series transmissions
• Automated wire cutting and crimping for terminal integrity
• Manufacturer Part Number: FPE-HAR-GM-NSBU-0405

Fits select 2001-2016 Chevrolet Silverado and GMC Sierra 2500 HD/3500 models (Allison 1000/2000 / 4L60E / 4L80E).

The Fleece Performance 20-pin transmission pigtail provides a high-quality solution for repairing damaged or corroded factory wiring harnesses. To simplify installation, each lead is 12 inches long and clearly labeled with its pin position. These pigtails are manufactured in-house using fully automated wire cutting and terminal crimping processes, ensuring precision tolerances and a reliable connection for your heavy-duty drivetrain. This kit replaces the discontinued GM part number 12126459 and AC Delco PT729.

• 12-inch wire leads with labeled pin positions
• Includes 20 heat-sealable butt-style connectors
• Fits Allison 1000/2000, 4L60E, 4L65E, 4L70E, 4L80E, 4L85E, 4T45E, 4T65E, and 4T80E transmissions
• Automated terminal crimping for maximum durability
• Replaces GM 12126459 and AC Delco PT729
• Manufacturer Part Number: FPE-HAR-GM-AT-20-PT