The Akrapovic Replacement VTS CAN Sniffer is a genuine service component designed for the Akrapovic Valve Control System (VTS). This module acts as the critical communication interface between the vehicle's CAN (Controller Area Network) bus and the exhaust system's control unit. It allows the system to read real-time engine data, ensuring the active exhaust valves respond accurately to RPM, gear selection, and throttle position.

• Genuine Akrapovic replacement part for VTS-equipped systems
• Restores CAN bus communication for precise exhaust valve management
• Designed for seamless integration with existing Akrapovic wiring harnesses
• Durable construction to withstand automotive operating environments

The Z Locker Power Harness is a specialized wiring solution designed to integrate with the Tazer programmer ecosystem. This harness provides the dedicated power delivery required to engage electronic axle lockers independently of factory software restrictions. By installing this harness, you gain the ability to utilize your lockers in various drive modes as permitted by the Tazer interface, providing essential traction control for technical off-road maneuvers.

• Enables independent front and rear locker control when paired with a Tazer programmer
• Constructed with automotive-grade connectors for a secure, weather-resistant connection
• High-quality protective looming resists heat and abrasion in harsh under-vehicle environments
• Provides the necessary electrical path to bypass factory locker engagement limitations
• Direct integration with factory locker solenoids

This Rywire Mil-Spec engine harness is engineered specifically for rear-wheel-drive (RWD) converted K-Series engines utilizing 2002-2004 electronics. Built to professional motorsport standards, this harness replaces aging factory wiring with high-temperature Tefzel (ETFE) wire and Raychem DR-25 heat shrink, providing superior resistance to chemicals, abrasion, and heat.

The included chassis-specific adapter ensures a clean, reliable interface between the engine management system and the vehicle’s factory body harness. This eliminates the need for manual repinning and ensures all critical signals are maintained with high integrity. This harness is designed for a clean, tucked layout optimized for RWD engine bay configurations.

• Fits 2002-2004 K-Series RWD swaps (K20, K24)
• Constructed with aviation-grade Tefzel wiring
• Raychem DR-25 flame-retardant heat shrink tubing
• Includes chassis-specific adapter for plug-and-play integration
• New OEM-style connectors with high-quality terminals
• Designed for use with select aftermarket ECUs or modified factory units

Fits 2002-2004 Honda K-Series engines. This Rywire Mil-Spec Engine Harness is engineered for professional-level engine swaps where reliability and a clean, wire-tucked aesthetic are required. It replaces the often bulky and aged factory wiring with a streamlined, high-performance solution designed to handle the rigors of high-heat engine bays and track use.

Constructed using high-grade Tefzel wire and genuine Raychem DR-25 heat-shrink tubing, this harness provides exceptional resistance to fluids and abrasion. The included chassis-specific adapter ensures a direct interface between the K-Series engine and your vehicle's interior harness, significantly reducing installation time and complexity. All connectors are brand new and specifically pinned for 2002-2004 K-Series components to maintain signal integrity for critical sensors.

• Specifically for 2002-2004 Honda K-Series engine platforms
• High-temperature Tefzel wiring for superior durability and conductivity
• Raychem DR-25 heat-shrink covering for chemical and heat resistance
• Integrated chassis-specific adapter for seamless plug-and-play integration
• Clean-room assembled with genuine Mil-Spec materials
• Replaces original equipment (OE) engine harness

This Rywire Mil-Spec engine harness provides a professional-grade wiring solution for 2002-2004 Honda K-Series engines. Designed to replace aging factory harnesses, this Mil-Spec version is built for reliability and a clean, tucked aesthetic in high-performance engine bays. It comes complete with a chassis-specific adapter, ensuring proper integration between your engine electronics and the vehicle's interior harness.

• Fits 2002-2004 Honda K-Series engines (K20/K24)
• Mil-Spec grade construction for superior heat resistance and durability
• Includes chassis-specific adapter for seamless plug-and-play installation
• Engineered for high-performance swaps and tucked engine bay configurations

The Rywire Tucked Budget Engine Harness is engineered for enthusiasts performing a Honda K-Series swap who prioritize a clean engine bay aesthetic without the cost of a full Mil-Spec loom. This harness is designed to route wiring away from the top of the engine, "tucking" the loom for a professional, uncluttered appearance that showcases the valve cover and intake manifold.

• Plug-and-Play Integration: Includes a chassis-specific adapter to seamlessly bridge the K-Series engine sensors to your vehicle's factory dash and interior wiring.
• Durable Construction: Built with high-temperature automotive-grade TXL wire and protected by expandable PET sleeving for resistance against heat, chemicals, and abrasion.
• Simplified Installation: Features clearly labeled connectors for K-Series sensors, including injectors, coils, VTEC solenoid, and charging system components.
• Compatibility: Designed for K20 and K24 engine swaps using a compatible ECU (A-type or B-type connectors depending on specific selection).

Each harness is assembled using new connectors and terminals to ensure reliable signal delivery and long-term performance in high-vibration environments. Part number: RY-K-TUCK-BUDGET.

The Rywire Tucked Budget Engine Harness provides a clean, professional wiring solution for Honda K-Series engine swaps. Designed for enthusiasts who want the aesthetic benefit of a "tucked" layout without the cost of a full Mil-spec conversion, this harness reroutes wiring away from the top of the valve cover to showcase the engine. By utilizing high-quality automotive-grade TXL wire and factory-style connectors, it offers a reliable connection that stands up to heat and vibration.

This kit simplifies the swap process by including a chassis-specific adapter, allowing the K-Series harness to interface directly with your vehicle's interior dash harness. It eliminates the guesswork of custom wiring and pin-outs, making it a true plug-and-play solution for common swap platforms.

• Engine Compatibility: Honda K-Series (K20, K24)
• Design: Tucked layout for improved engine bay aesthetics and cable management
• Construction: Durable TXL wire with high-quality loom protection
• Installation: Includes integrated chassis-specific adapter for plug-and-play connectivity
• Connectors: OE-style plugs for sensors, injectors, and ignition coils

Streamline your engine bay with the Rywire Budget Tuck Engine Harness, specifically engineered for Honda B-Series engines using OBD2 components. This harness provides a professional "tucked" appearance by routing the wiring away from the top of the engine and valve cover, offering a significantly cleaner aesthetic for your swap or restoration project.

Built with high-quality automotive-grade TXL wire and brand-new connectors, this budget-friendly alternative to Mil-Spec looms provides reliable signal delivery to your sensors and injectors without the custom-build price tag. Each harness includes a chassis-specific adapter, ensuring a direct interface between the engine harness and your vehicle's factory interior wiring for a simplified installation.

• Engineered for Honda B-Series engines with OBD2 sensors and injectors
• "Tucked" layout hides wiring for a show-quality engine bay
• Includes chassis-specific adapter for seamless chassis integration
• Constructed with new connectors and durable automotive-grade wiring
• Manufacturer Part Number: Rywire Budget-B-OBD2

The Rywire Budget Tucked Engine Harness provides a streamlined wiring solution for Honda B-Series engines utilizing OBD2 electronics. Designed for enthusiasts seeking a professional engine bay appearance, this harness routes wiring away from the top of the valve cover and intake manifold to achieve a "tucked" look.

This kit includes a chassis-specific adapter to ensure seamless integration between the engine sensors and your vehicle's factory interior wiring. By using high-quality connectors and durable looming, it replaces worn or cluttered OE harnesses with a simplified, reliable layout.

• Fits Honda B-Series engines with OBD2 sensors and injectors
• Relocates wiring for a clean, tucked engine bay aesthetic
• Includes chassis-specific adapter for plug-and-play installation
• Constructed with high-quality connectors and abrasion-resistant loom
• Engineered for street performance and engine swap applications

Streamline your engine bay and simplify your wiring with the Rywire Budget Tucked Engine Harness. Specifically designed for Honda B-Series OBD2 engines, this harness routes wiring away from the top of the valve cover and intake manifold for a cleaner, "tucked" aesthetic without the price point of a full Mil-Spec racing harness.

• Engine Compatibility: Honda B-Series
• System Type: OBD2
• Series: Budget (Automotive-grade TXL wire with high-quality plastic loom)
• Layout: Tucked design for improved engine bay clearance and aesthetics
• Included: Chassis-specific adapter for seamless integration with factory cabin plugs

Constructed with new terminals and wire, this harness replaces brittle, high-mileage factory wiring to restore signal integrity to your sensors and injectors. The included adapter ensures a plug-and-play experience between the tucked engine loom and your vehicle's specific chassis harness.

The Rywire Honda B-Series OBD2 Budget Tuck Engine Harness provides a professional, streamlined wiring solution for B-Series engine swaps and builds. Engineered for those seeking a cleaner engine bay without the premium cost of a full Mil-Spec harness, the Budget series features a layout that routes wiring away from the top of the engine for a classic "wire tuck" appearance.

This harness solves the common frustration of adapting swap electronics by including a chassis-specific adapter, allowing the engine-side harness to interface directly with your vehicle's interior wiring. It replaces brittle, decades-old factory harnesses with high-quality connectors and durable looming to ensure reliable signal delivery to your ECU and sensors.

• Fits Honda B-Series engines utilizing OBD2 electronics
• Tucked layout improves engine bay aesthetics and accessibility
• Includes chassis-specific adapter for plug-and-play integration
• Constructed with high-quality connectors and heat-resistant loom
• Ideal for street builds and enthusiasts seeking a tidy, organized look

Clean up your engine bay while ensuring reliable electrical connections with the Rywire Budget Tucked Engine Harness. Designed specifically for Honda B-Series engines running OBD2 management, this harness allows you to route wiring away from the top of the valve cover for a "tucked" look without the premium price of a full Mil-Spec loom.

This harness includes a chassis-specific adapter, enabling a plug-and-play installation that integrates seamlessly with your vehicle's factory cabin harness. By replacing brittle, high-mileage OE wiring, you eliminate common intermittent electrical issues and sensor failures while simplifying the troubleshooting process.

• Engine Compatibility: Honda B-Series (B16, B18, B20)
• Management: OBD2
• Design: Tucked layout for a cleaner engine bay aesthetic
• Installation: Integrated chassis-specific adapter for simplified, no-cut install
• Construction: High-quality automotive-grade wiring and connectors for long-term durability

The Rywire Honda B-Series OBD2 Budget Tucked Engine Harness provides a clean, streamlined solution for enthusiasts looking to simplify their engine bay aesthetics without the expense of a full mil-spec harness. Designed specifically for Honda B-Series engines using OBD2 components, this harness routes wiring discretely to achieve a "tucked" look while maintaining reliable electrical connectivity.

This package includes a chassis-specific adapter, enabling a direct interface between the B-Series engine harness and your vehicle's factory interior wiring. By using this plug-and-play adapter, you eliminate the need for custom pinning or complex wire splicing during a swap or engine refresh.

• Fits Honda B-Series engines with OBD2 sensors and injectors
• Tucked layout improves engine bay clearance and appearance
• Includes chassis-specific adapter for seamless integration
• Constructed with high-quality automotive-grade wiring and connectors
• Engineered for simplified installation in swap applications

The Rywire Budget Tucked Engine Harness is a professional solution for Honda B-Series enthusiasts looking to clean up their engine bay while maintaining a budget-conscious build. This harness is designed for a tucked aesthetic, routing wiring away from the valve cover and intake manifold for a show-ready look that hides cluttered factory looms.

This kit includes a chassis-specific adapter, ensuring your B-Series OBD2 engine sensors communicate correctly with your vehicle's factory wiring. Built with high-quality connectors and durable looming, it replaces brittle or modified original wiring with a simplified, reliable electrical path.

• Engine Compatibility: Honda B-Series (OBD2)
• Harness Style: Tucked for a cleaner engine bay appearance
• Adapter Included: Chassis-specific adapter for easier integration
• Series: Rywire Budget Line
• Construction: High-quality looming and secure terminal connections

The Rywire Budget Tuck Engine Harness provides a reliable, streamlined wiring solution for Honda B-Series OBD1 engine swaps. Designed for enthusiasts looking to clean up their engine bay, this harness routes wiring away from high-visibility areas for a professional "tucked" look without the premium cost of a full mil-spec loom.

• Fits Honda B-Series engines using OBD1 electronics.
• Engineered for a "tucked" layout to hide wiring for a cleaner engine bay aesthetic.
• Includes a chassis-specific adapter to ensure direct integration with your vehicle's factory harness.
• Constructed with high-quality automotive-grade wire and durable looming to withstand engine bay heat and vibration.
• Simplifies the installation process by replacing brittle or hacked factory looms with a fresh, plug-and-play solution.

This harness is ideal for street builds and project cars where reliability and presentation are priorities. It replaces the engine-side wiring and mates specifically to the chassis harness using the included adapter, ensuring all sensors and ECU signals maintain consistent connectivity.

The Rywire Honda B-Series OBD1 Budget Tuck Engine Harness provides a streamlined wiring solution for enthusiasts looking to clean up their engine bay without the expense of a full mil-spec harness. This harness is engineered for B-Series engines running an OBD1 ECU, offering a "tucked" layout that routes wiring more discreetly than the bulky factory loom while maintaining high reliability.

Every Budget Tuck harness includes a chassis-specific adapter, allowing for a direct interface with your vehicle's factory wiring. This ensures a plug-and-play installation that bridges the engine sensors to your specific chassis plugs without the need for custom splicing or pin-out guesswork.

• Fits Honda B-Series engines using OBD1 ECUs
• Budget Tuck configuration for a cleaner engine bay aesthetic
• Integrated chassis-specific adapter for seamless vehicle compatibility
• High-quality connectors and automotive-grade wiring for durability
• Ideal for street builds and budget-conscious restorations

Clean up your engine bay and restore electrical reliability with the Rywire Budget Series Engine Harness. This tucked-style harness is designed specifically for Honda B-Series engines running an OBD1 ECU, routing wires away from the valve cover for a streamlined appearance without the cost of a full Mil-spec conversion.

Built with brand-new connectors and high-quality TXL automotive-grade wire, this harness eliminates the common issues associated with brittle, decades-old factory wiring. The Budget series provides a reliable, professional-grade wiring solution using standard automotive looming techniques, offering a perfect balance of performance and value for street and track builds.

• Compatible with Honda B-Series engines using OBD1 electronics and sensors.
• Includes a chassis-specific adapter to interface the engine harness with your vehicle's factory cabin harness.
• Tucked design routes wiring under the intake manifold for a cleaner, show-quality aesthetic.
• Constructed with all-new plugs, terminals, and high-temperature wire for long-term durability.
• Provides a direct replacement for worn or damaged OE engine harnesses.

Clean up your engine bay with the Rywire Budget Series engine harness, designed specifically for Honda B-Series engines running OBD1 electronics. This harness follows a "tucked" layout, routing the wiring away from the top of the valve cover and intake manifold for a professional, uncluttered appearance without the cost of a full Mil-Spec loom.

• Fits Honda B-Series engines (B16, B18, B20) with OBD1 (1992-1995 style) electronics.
• Integrated chassis-specific adapter allows for a direct plug-and-play connection to your vehicle's factory interior dashboard harness.
• Constructed with high-quality automotive-grade TXL wire and adhesive-lined heat shrink for durability and moisture resistance.
• Tucked design improves aesthetics and provides easier access to engine components during maintenance.
• Includes all necessary connectors for a standard B-Series EFI setup.

The Rywire Budget Series engine harness provides a professional, streamlined solution for Honda B-Series owners looking to achieve a "wire tuck" look without the premium cost of a full mil-spec loom. This harness is engineered specifically for B-Series engines (B16, B18, B20) running OBD1 electronics, allowing you to route wiring through the firewall to create a clean, minimalist engine bay.

Built with Rywire’s signature attention to detail, the Budget Series uses high-quality standard looming to provide durability and a factory-plus aesthetic. This package includes the necessary chassis-specific adapter, making the transition from your engine harness to your vehicle's interior wiring much simpler than a universal or DIY solution.

• Fits Honda B-Series engines (B16, B18, B20)
• Compatible with OBD1 ECU configurations
• Designed for wire tuck applications to hide harnesses from view
• Includes chassis-specific adapter for integrated plug-and-play functionality
• High-quality standard looming for protection and flexibility
• Manufacturer Part Number: Rywire Budget-B-OBD1

The Rywire Honda B-Series OBD1 Budget Tucked Engine Harness is engineered for enthusiasts who want a clean, organized engine bay without the premium cost of a full mil-spec harness. This harness simplifies your wiring layout by rerouting the loom for a "tucked" look, making it an ideal choice for B-Series engine swaps or engine bay refreshes.

• Designed specifically for Honda B-Series engines utilizing an OBD1 ECU.
• Includes a chassis-specific adapter for seamless integration with your vehicle's factory wiring.
• Features high-quality automotive-grade wiring and connectors for maximum conductivity and heat resistance.
• Provides a clean routing solution for essential sensors, injectors, and ignition components.

This budget-friendly harness offers a reliable, plug-and-play solution that replaces worn factory looms while significantly improving the visual appeal of your B-Series swap.

Streamline your engine bay with the Rywire B-Series OBD1 Budget Tucked Engine Harness. Designed specifically for Honda B-Series engines running OBD1 electronics, this harness allows you to route wiring away from the valve cover for a clean, "tucked" aesthetic without the expense of a full mil-spec race harness. It provides a reliable solution for replacing brittle, heat-damaged, or hacked factory wiring.

Constructed with high-quality automotive-grade wire and new connectors, this harness ensures consistent signal integrity between your sensors and the ECU. The included chassis-specific adapter bridges the engine harness to your vehicle's factory wiring, simplifying the installation process and maintaining a plug-and-play experience for your specific chassis.

• Fits Honda B-Series engines utilizing OBD1 electronics and injectors
• Tucked layout hides wiring for an improved engine bay appearance
• Includes chassis-specific adapter for seamless integration with factory plugs
• Built with durable automotive-grade loom and high-quality terminals
• Ideal for street builds and budget-conscious restorations

The Rywire Honda B-Series OBD1 Budget Tucked Engine Harness is engineered for drivers who want a clean, professional engine bay without the complexity of a full mil-spec loom. This harness utilizes a "tucked" design, routing the wiring away from the top of the engine and valve cover to showcase the mechanical components of your B-Series build.

Constructed with high-quality connectors and heat-resistant looming, this harness ensures stable signal transmission to critical engine sensors and fuel injectors. The included chassis-specific adapter eliminates the guesswork of wiring, providing a direct bridge between the engine harness and your vehicle's factory cabin wiring for a more straightforward installation process.

• Fits Honda B-Series engines (B16, B18, B20) utilizing OBD1 electronics.
• Tucked layout hides wiring for a minimalist, show-quality aesthetic.
• Budget Series design offers Rywire's signature reliability for street and track use.
• Complete with a chassis-specific adapter for seamless vehicle integration.
• Designed to withstand high-vibration and high-heat engine bay environments.

Clean up your engine bay and simplify your wiring with the Rywire B-Series OBD1 Tucked Budget Engine Harness. This harness is engineered for Honda B-Series engines utilizing an OBD1 ECU, providing a reliable solution for swaps or replacing brittle, decades-old factory wiring. The "tucked" design allows you to route the harness more discreetly for a professional, show-ready aesthetic without the premium price of a full Mil-Spec loom.

• Designed specifically for Honda B-Series engine platforms.
• Compatible with OBD1 (1992-1995 style) electronics and ECUs.
• Includes a chassis-specific adapter for seamless integration with your vehicle's interior/dash harness.
• Tucked routing layout for a cleaner, organized engine compartment.
• Constructed with high-quality connectors and durable looming to withstand engine bay heat and vibration.

Each Rywire Budget Harness is designed to be a functional, cost-effective alternative to custom-built looms while maintaining the high standards of conductivity and fitment Rywire is known for. This kit includes the necessary adapter sub-harness to ensure a straightforward installation.

The Rywire Budget Tuck Engine Harness provides a reliable and clean wiring solution for Honda B-Series engines running OBD1 electronics. Designed for enthusiasts looking to simplify their engine bay without the cost of a full Mil-spec harness, this budget version uses high-quality TXL wire and durable looming to ensure long-term performance and heat resistance.

This harness features a "tuck" routing style, allowing you to hide the wiring for a streamlined, professional appearance. The included chassis-specific adapter ensures a straightforward installation, interfacing directly with your vehicle's factory cabin wiring to eliminate the need for splicing or manual pin-out modifications. This is an essential upgrade for B-Series swaps or for replacing a brittle, 30-year-old factory harness.

• Compatible with Honda B-Series engines (B16, B18, B20)
• Configured for OBD1 ECU and component standards
• "Tuck" design for a cleaner engine bay aesthetic
• Includes chassis-specific adapter for plug-and-play integration
• Constructed with high-temperature TXL wire and durable loom

The Rywire Tucked Budget Engine Harness provides a clean, organized wiring solution for Honda B-Series and D-Series engines running an OBD1 ECU. Designed for enthusiasts who want a professional "tucked" look without the complexity of a full custom loom, this harness reroutes wiring away from the top of the engine and intake manifold to streamline your engine bay aesthetic.

Constructed with high-quality materials to ensure reliable signal delivery between your sensors and the ECU, the Budget series offers the essential functionality and durability Rywire is known for. It is an ideal choice for street builds and project cars where a clean appearance is a priority. The inclusion of a chassis-specific adapter simplifies the integration process, bridging the gap between your engine harness and factory body wiring.

• Compatible with Honda B-Series and D-Series engines
• Configured specifically for OBD1 ECU applications
• Tucked layout improves engine bay aesthetics and component accessibility
• Includes chassis-specific adapter for a more straightforward installation
• High-quality looming and connectors for long-term reliability

Ensure millisecond-precise ignition and fuel timing on your high-performance engine with the HKS RB26 Crank Angle Sensor (CAS) Kit. This specialized timing solution is engineered specifically for Nissan RB26DETT engines equipped with the HKS V-Cam system, where the factory cam-driven sensor often faces clearance or resolution limitations.

• Designed for seamless integration with HKS V-Cam systems to manage variable intake timing
• Provides a high-resolution, stable signal for consistent engine management performance
• Replaces the OE cam position sensor to eliminate timing drift caused by belt stretch or harmonics
• Includes heavy-duty sensor, precision trigger wheel, and all necessary mounting hardware
• Essential for high-RPM builds requiring absolute timing accuracy across the powerband

The HKS Crank Angle Sensor Kit is a precision-engineered upgrade designed to eliminate the ignition timing jitter and signal noise common in high-performance Nissan RB26 engines. At high RPMs, the factory optical sensor can struggle to maintain a stable signal, leading to timing fluctuations that risk engine safety. This kit provides a high-resolution, stable trigger signal for the ECU, ensuring accurate ignition and injection timing even under extreme boost and engine speeds.

• Provides a high-accuracy signal for consistent engine management performance
• Reduces timing jitter compared to the factory Nissan optical sensor
• Essential for high-horsepower RB26 builds requiring precise tuning
• Includes high-quality mounting hardware and sensor assembly
• Designed for durability in high-heat performance environments

This 1.2-meter (4-foot) wideband harness is designed for seamless integration with Haltech Elite PRO Direct Plug-in ECUs. It provides a direct, reliable connection to ensure accurate air-fuel ratio (AFR) monitoring, which is critical for precision tuning and engine protection during closed-loop fuel control.

• Vehicle Compatibility: Designed specifically for Elite PRO Direct Plug-in ECU systems.
• Sensor Support: Optimized for use with Bosch LSU 4.9 wideband sensors.
• Cable Length: 1.2m (4ft) provides sufficient reach for clean routing within the engine bay or cabin.
• Direct Integration: Plugs directly into the ECU expansion port for a secure, high-fidelity signal.
• Requirement Note: This harness does not include the sensor. Please use Haltech part number HT-010718 if a sensor is required.

The AEM CD Carbon Dash 2-Button External Button Kit (MPN 30-3610) provides a rugged, remote solution for navigating digital dash layouts. Designed specifically for AEM CD Carbon and CD Flat Panel dashes, this kit allows drivers to change display pages via steering wheel-mounted controls or custom panel locations rather than relying on the unit's integrated buttons.

• Includes two waterproof momentary buttons designed for universal mounting.
• Features 20-inch flying leads to accommodate diverse steering wheel and dashboard configurations.
• Color-coordinated button housings for fast, intuitive identification in high-speed environments.
• Ideal for open-cockpit applications or vehicles where the dash unit is mounted out of easy reach.
• Compatible with all AEM CD series digital displays.
• Manufacturer Part Number: 30-3610

The SPAL SBL-YAZ-PT10-PKG Harness Adapter is engineered to provide a professional-grade electrical interface for SPAL brushless cooling fans. This adapter ensures a secure, low-resistance connection between the fan motor and your vehicle’s wiring, protecting the sophisticated electronics within the brushless motor from vibration and environmental ingress. Ideal for performance applications where reliable cooling and clean wiring are paramount.

• Specifically designed for SPAL brushless fan series integration
• Provides a secure, weather-sealed link for power and signal wires
• Simplifies installation and future fan maintenance
• High-quality materials to withstand engine bay heat and vibration
• Manufacturer Part Number: SBL-YAZ-PT10-PKG