Fits 2021+ BMW M4 G82 Coupe and G83 Convertible.

Brembo TS20 Performance Street brake pads are engineered for the enthusiast who demands more thermal capacity and bite than factory equipment provides. Developed as a high-performance street upgrade, the TS20 compound offers superior friction stability across a wider temperature range, making it ideal for spirited driving and heavy-use applications without the excessive noise or rotor wear associated with track-only pads.

These 18mm thick rear pads are a direct-fit replacement for the factory G8X M4 braking system. They provide a more consistent pedal feel and improved modulation, ensuring your BMW's stopping power matches its performance capabilities.

• Brand: Brembo
• Series: TS20 Performance Street
• Part Number: 2427
• Thickness: 18mm
• Position: Rear Axle
• Fitment: 2021+ BMW M4 (G82/G83)
• Improved fade resistance over OE friction materials
• Designed for high-performance street and canyon driving

Maintain the hydraulic integrity and performance of your braking system with this genuine Brembo 38mm piston seal. Designed specifically for calipers utilizing a 38mm piston diameter, this replacement seal is critical for preventing brake fluid leaks and ensuring proper piston retraction after every brake application.

• Precision-engineered for 38mm Brembo caliper pistons
• Manufactured from high-grade elastomers for thermal stability and fluid resistance
• Restores consistent pedal feel and hydraulic pressure
• Direct replacement for worn or damaged OE seals

Using authentic Brembo replacement components ensures your braking system operates within the tight tolerances required for high-performance and street applications alike. Regular inspection and replacement of caliper seals are essential during brake overhauls to prevent contamination and maintain stopping power.

Fits 2021-2024 BMW M4 (G82/G83).

Brembo TS20 performance street pads are engineered for drivers who demand higher thermal capacity and more aggressive response than factory components provide, without sacrificing daily drivability. This compound offers a high initial bite and consistent friction across a wide temperature range, making it the ideal upgrade for the G82 M4 Coupe and G83 M4 Convertible during spirited street use.

These front brake pads are manufactured to Brembo's exacting standards, featuring a 20in thickness for extended wear life and improved heat dissipation under heavy braking loads. They are a direct-fit replacement for the front axle, utilizing the 2466 backing plate profile to ensure a precise fit within the factory calipers.

• Brembo TS20 high-performance street compound
• Position: Front
• Thickness: 20in
• Part Number: 2466
• Fits G82 and G83 chassis generations

This genuine Brembo 38mm dust boot is a critical replacement component for maintaining the integrity of your high-performance braking system. Designed to fit 38mm caliper pistons, this boot acts as a primary barrier against brake dust, road debris, and moisture, preventing contaminants from reaching the internal piston seal and cylinder bore.

• Precision Fit: Engineered specifically for 38mm Brembo caliper pistons to ensure a secure, weather-tight seal.
• Durability: Constructed from high-grade elastomer compound to withstand the extreme heat cycles and environmental exposure typical of performance driving.
• Critical Maintenance: Replacing torn or heat-cracked boots is essential during a caliper rebuild to prevent piston stiction and corrosion.
• Authentic Brembo: Ensures exact compatibility and performance matching the original equipment standards.

Restore the integrity of your braking system with this genuine Brembo 34mm dust boot. Designed for calipers utilizing 34mm pistons, this boot acts as a critical secondary seal, preventing brake dust, road debris, and moisture from reaching the piston bore and the primary pressure seal. Maintaining intact dust boots is essential for preventing piston pitting and ensuring smooth, consistent caliper retraction.

• Compatible with Brembo calipers using 34mm pistons
• Durable elastomer construction resists high brake temperatures
• Helps prevent piston sticking and internal seal contamination
• Genuine Brembo replacement part for precise fitment

This genuine Brembo 40mm dust boot is an essential replacement component for maintaining the performance and longevity of your braking system. Specifically engineered for 40mm caliper pistons, this boot provides a critical seal that shields the piston and internal seals from road grime, brake dust, and moisture.

• Genuine Brembo replacement part
• Precision fit for 40mm diameter caliper pistons
• Durable construction to withstand high-heat braking environments
• Prevents piston seizure and seal degradation by blocking contaminants

Replacing a torn, cracked, or heat-fatigued dust boot is a vital part of any caliper service or rebuild. By ensuring the piston remains clean and protected, you maintain smooth piston retraction and consistent pedal feel while preventing premature seal failure.

Maintain the integrity of your braking system with this genuine Brembo 28mm replacement piston seal. This critical hydraulic component is engineered to provide a precise, high-pressure seal between the caliper bore and the piston, preventing fluid leaks and protecting against external contaminants.

Over time, heat cycles and exposure to brake fluid can cause seals to harden or lose elasticity, leading to sluggish piston retraction or brake drag. Replacing worn seals with genuine Brembo components ensures consistent pedal feel and reliable stopping power. This seal is an essential part for rebuilding or servicing high-performance Brembo calipers equipped with 28mm pistons.

• Piston Diameter: 28mm
• Material: High-temperature resistant elastomer
• Ensures proper piston retraction and hydraulic pressure
• Genuine Brembo replacement component

This Brembo Hardware Pack is engineered for the precise assembly and maintenance of high-performance multi-piece brake rotors. Designed specifically for 365x34mm and 380x34mm rotor sizes, this kit provides the critical fasteners required to secure the rotor ring to the bell or hat assembly. This is an essential service component for maintaining the structural integrity and thermal expansion performance of your braking system.

As a partial hardware kit, it includes the high-strength bolts and washers needed for a hardware refresh but does not include the bushings. This kit is ideal for professional brake service where existing bushings are within specification or are being sourced separately for a custom application.

• Compatible with Brembo 365x34mm and 380x34mm multi-piece rotors
• Partial kit configuration (bushings not included)
• Engineered for high-torque applications and thermal cycling
• Direct replacement for one-time-use assembly hardware
• Ensures proper rotor-to-hat mating for track and street use

Maintain the integrity of your braking system with a genuine Brembo 44mm dust boot. This critical component serves as the primary barrier between the caliper piston and the harsh environment of the wheel well, shielding internal seals from abrasive brake dust, road grime, and moisture.

Over time, high thermal cycles and environmental exposure can cause original boots to crack or tear, leading to piston corrosion and potential caliper seizure. Replacing damaged boots during a pad change or caliper service ensures smooth piston retraction and extends the service life of your brake components.

• Manufacturer: Brembo
• Component Type: Caliper Piston Dust Boot
• Piston Diameter: 44mm
• Material: High-temperature resistant rubber compound

Maintain consistent braking performance and a firm pedal feel with this authentic Brembo racing caliper bleeder screw. Designed for high-performance hydraulic systems, this component allows for efficient air evacuation during brake fluid service and system bleeding.

Constructed with a durable zinc-plated finish, this bleeder screw provides essential corrosion resistance to withstand the high temperatures and environmental exposure typical of track use. The precision-machined M10x1.0 thread ensures a secure, leak-free seal within the caliper body for reliable pressure retention.

• Brand: Brembo
• Thread Pitch: M10x1.0
• Overall Length: 29mm
• Material: Zinc-Plated Steel
• Finish: Silver
• Application: Brembo Racing Calipers

Protect your braking system from environmental contaminants with the Brembo Standard Bleeder Screw Cap. This essential component fits securely over the bleeder valve on Brembo brake calipers to prevent road grime, brake dust, and moisture from obstructing the orifice or causing the threads to seize over time.

Molded from a durable, high-temperature rubber compound, these caps are designed to withstand the extreme thermal cycles experienced during performance driving without hardening or cracking. Maintaining intact bleeder caps is a critical yet often overlooked step in ensuring your next brake bleed is clean and efficient.

• Genuine Brembo replacement component ensures proper fitment
• High-temperature resistant rubber construction for long-term durability
• Provides a weather-tight seal to protect the internal bleeder valve channel
• Designed for use on standard Brembo performance and OE-equipped calipers

The Brembo PISTA D-Bobbin Hardware Pack (MPN 915503) provides the critical mounting interface required for high-performance semi-floating brake rotors. Specifically engineered for racing applications, this 10-hole hardware kit enables controlled thermal expansion of the brake disc under high heat. This semi-floating design reduces mechanical stress on the rotor hat, significantly lowering the risk of disc warping and cracking during aggressive track use.

• Series: Brembo PISTA
• Hardware Type: D-Bobbin Semi-Floating System
• Mounting Specification: 10-Hole Configuration
• Flange Size: 8mm
• Manufacturer Part Number: 915503

This professional-grade hardware pack ensures precise rotor alignment and consistent pedal feel by maintaining the necessary clearances between the rotor ring and the bell. It is an essential component for refreshing or assembling Brembo racing brake systems.

The Brembo PISTA D-Bobbin Semi-Floating Hardware Pack is a professional-grade component set designed for high-performance racing brake systems. This hardware kit is specifically engineered to accommodate 10-hole mounting patterns on rotors with a 6mm flange thickness, allowing the disc to expand and contract freely under extreme thermal stress.

• Manufacturer Part Number: 915502
• Series: Brembo PISTA
• Bobbin Design: D-Bobbin (Semi-Floating)
• Fitment: 10-Hole Mounting Discs
• Flange Specification: 6mm
• Application: Track and Competition Brake Assemblies

By utilizing a semi-floating D-bobbin configuration, this kit reduces the risk of rotor warping and ensures a consistent pedal feel through multiple heat cycles. This pack includes the necessary precision hardware to properly mount a single disc to its corresponding bell or hat.

Fits select 2007-2014 Subaru WRX and 2011 WRX STI (2.5L).

The Brembo TY3 Sport Rear Disc Rotor is a high-performance braking solution designed for enthusiasts who require consistent stopping power and thermal management. These rotors feature Brembo's signature Type 3 (TY3) curved slot pattern, a technology derived from top-tier motorsport applications to improve initial bite and continuously refresh the brake pad surface.

• Direct replacement for factory rear rotors on select AWD Subaru applications
• TY3 curved slot design clears brake dust, gases, and water for consistent friction
• Enhanced metallurgy resists thermal cracking and brake fade during spirited driving
• Zinc-coated or corrosion-resistant finish on the hat and vane edges
• Precision-machined 316mm diameter and 20mm thickness
• Manufacturer Part Number: 59.E115.74

Fits select 2007-2014 Subaru WRX and 2011 WRX STI AWD models (2.5L).

This Brembo TY3 Sport series front disc rotor is engineered for enthusiasts demanding consistent braking performance under high-thermal stress. Featuring the motorsport-derived Type 3 (TY3) slot pattern, these rotors improve initial bite by continuously cleaning the pad surface and venting out gasses and dust. The 326mm diameter and 30mm thickness provide the thermal mass necessary for spirited driving and occasional track use while maintaining daily driveability.

• Brembo TY3 Sport series performance rotor
• Advanced Type 3 curved slot pattern for superior pad cleaning and gas venting
• Direct replacement for factory front rotors
• Optimized for heat dissipation and friction consistency
• Dimensions: 326mm x 30mm
• Manufacturer Part Number: 59.E114.22

Fits 2012-2016 Scion FR-S models (excluding vehicles equipped with Electronic Parking Brake).

The Brembo GT (Gran Turismo) Rear Big Brake Kit is engineered to provide increased thermal capacity and more consistent braking performance for the 2012-2016 Scion FR-S. This system replaces the factory rear setup with high-performance components designed for the demands of spirited street driving and track environments. The kit utilizes 2-piston cast aluminum calipers for improved clamping force and pedal feel, paired with larger 1-piece rotors for superior heat dissipation.

• Caliper Type: 2-piston cast aluminum 2-piece body
• Caliper Finish: Gold
• Rotor Dimensions: 316mm diameter x 20mm thickness
• Rotor Design: 1-piece Slotted Type 1 rotors for improved gas venting and pad cleaning
• Installation: Includes all necessary mounting hardware and brackets
• Manufacturer Part Number: 2E5.5003A4

Fits 2012-2016 Scion FR-S (Excludes models equipped with Electronic Parking Brake).

The Brembo GT (Gran Turismo) Rear Big Brake Kit is engineered to provide increased stopping power and consistent thermal management for the 2012-2016 Scion FR-S. This system replaces the factory rear components with high-performance 2-piston cast calipers and oversized 316x20mm 1-piece slotted rotors. The Type 1 slotted pattern effectively clears brake dust and gases while improving initial bite, ensuring reliable deceleration under repeated heavy braking.

• 2-Piston cast 2-piece calipers finished in high-visibility red
• 316x20mm 1-piece Type 1 slotted rotors for improved heat dissipation
• Integrated design maintains proper brake balance and ABS compatibility
• Includes high-performance brake pads and all necessary installation hardware
• Manufacturer Part Number: 2E5.5003A2

Fits 2008-2014 Subaru WRX models.

Upgrade your Subaru's braking performance with the Brembo GT (Gran Turismo) Rear Big Brake Kit. Designed for enthusiasts seeking consistent pedal feel and improved thermal capacity, this kit replaces the factory rear setup with Brembo's world-renowned braking technology. The fixed 2-piston calipers provide a significant increase in stiffness and clamping force compared to OEM sliding calipers.

This system includes 316mm x 20mm 1-piece slotted Type 1 rotors, engineered to dissipate heat effectively and maintain a clean pad surface for optimal friction. The cast aluminum calipers are finished in a signature Gold coating for lasting corrosion resistance and a high-performance aesthetic.

• Fixed 2-piston cast 2-piece calipers for maximum stiffness
• 316mm x 20mm 1-piece Type 1 slotted rotors
• Signature Gold painted finish
• Enhanced thermal management and brake modulation
• Complete hardware set for straightforward installation
• Manufacturer Part Number: 2E5.5002A4

Fits 1992-2002 Dodge Viper RT-10 and GTS models.

Maintain peak parking brake performance and aesthetic consistency with the Brembo GT Series Rear Hand-Brake Kit. This system is designed specifically for the Dodge Viper chassis, providing a dedicated 1-piston cast caliper solution for secondary braking requirements. This kit is an essential component when upgrading to a primary Big Brake Kit to ensure factory-level hand-brake functionality is preserved with Brembo precision and reliability.

• Application: 1992-2002 Dodge Viper RT-10/GTS (Rear)
• Caliper Type: 1-piston cast aluminum floating caliper
• Component Design: 2-piece system for optimized fitment
• Finish: Durable black coating for corrosion resistance
• Function: High-performance hand-brake / parking brake assembly
• Manufacturer Part Number: 2D0.8001A1

Fits 2015-2021 Subaru WRX (VA).

Improve the braking performance and thermal capacity of your Subaru with the Brembo GT (Gran Turismo) Front Big Brake Kit. This system is designed for drivers who demand consistent pedal feel and reliable stopping power during spirited street use or light track days. The kit replaces the factory front calipers and rotors with high-performance Brembo components engineered specifically for the VA chassis.

• Caliper: 4-Piston cast 2-piece aluminum calipers in a signature Gold finish.
• Rotor: 326mm x 30mm 1-piece vented rotors featuring a Type-1 slotted pattern for improved pad degassing and initial bite.
• Hardware Included: Stainless steel braided brake lines, high-performance brake pads, and all necessary mounting brackets for a direct-fit installation.
• Manufacturer Part Number: 1E5.6003A4

Fits select 2002-2014 Subaru Impreza and WRX models.

The Brembo GT (Gran Turismo) Front Big Brake Kit is engineered to provide superior stopping power and thermal management for both high-performance street driving and light track use. This system replaces the factory front brakes with high-stiffness 4-piston calipers and larger, more efficient rotors to significantly reduce brake fade and improve pedal modulation.

• Calipers: 4-piston cast 2-piece aluminum calipers for increased clamping force and consistent pressure.
• Rotors: 326mm x 30mm 1-piece slotted rotors (Type 1) designed to clear debris and gases for better pad bite.
• Finish: High-temperature resistant gold coating for a premium aesthetic and corrosion protection.
• Complete Kit: Includes high-performance brake pads and all necessary mounting hardware for a direct-fit installation.
• Manufacturer Part Number: 1E5.6002A4