Fits select 2007-2017 Jeep Wrangler and Wrangler Unlimited JK models (3.6L).

The Gibson Axle-Back Dual Split Exhaust system is engineered to provide the low-end torque and mid-range power required for off-road crawling and heavy towing. Designed to optimize performance from idle to 3,000 RPM, this system replaces the restrictive factory muffler with a high-flow Superflow™ baffled and chambered muffler. Because it contains no internal packing to blow out or deteriorate, the exhaust maintains a consistent, aggressive sound profile with minimal interior drone over the life of the vehicle.

Constructed from 2.5-inch aluminized mandrel-bent tubing, the system features a dual split rear exit for a balanced aesthetic. The kit includes large-diameter polished stainless steel slash-cut tips and all necessary hardware for a straightforward, bolt-on installation using factory mounting points.

• Main Piping: 2.5-inch aluminized mandrel-bent tubing
• Muffler Type: Baffled and chambered Superflow™ design (no internal packing)
• Exit Style: Dual rear split exit
• Tips: Polished stainless steel slash-cut tips
• Installation: Direct bolt-on; replaces factory axle-back
• Manufacturer Part Number: 17303
• Warranty: Lifetime Limited Warranty

Gibson Marine Power Tip mufflers (310001) provide a technical solution for boaters needing to satisfy strict noise regulations without sacrificing engine performance. These clamp-on mufflers utilize the vessel's cooling water to effectively dampen exhaust notes, allowing you to meet or exceed the 88dB limits required by California SAE J2005 motorboat sound laws.

Constructed from high-grade stainless steel, these 4-inch inlet mufflers feature a polished rolled edge tip design. They are engineered for a straightforward bolt-on installation to OEM-style transoms or via the included clamp-on hardware. Each unit has been tested to ensure minimal to no power loss, providing a reliable balance of flow and sound suppression.

• Construction: High-grade stainless steel for marine environment durability
• Inlet Diameter: 4 inches
• Overall Length: 6.75 inches
• Mounting Type: Clamp-on or OEM-style transom mount
• Design: Rolled edge tip
• Compliance: Surpasses SAE J2005 88dB sound limits
• Quantity: Sold as a pair
• Part Number: 310001

Fits select 2002-2006 Cadillac Escalade, Chevrolet Silverado/Suburban, GMC Sierra/Yukon, and Hummer H2 (6.0L).

Gibson Performance headers are dyno-tuned to deliver increased low- and mid-range horsepower and torque, making them ideal for heavy-duty towing, street performance, and off-road use. Designed as a direct bolt-on replacement for restrictive factory manifolds, these headers maintain compatibility with your stock crossover pipe and OEM-style connections without the need for cutting or welding.

Constructed from mandrel-bent 16-gauge 409L stainless steel, the 1-5/8 inch primary tubes ensure smooth exhaust gas scavenging and improved engine breathing. The heavy-duty 3/8-inch laser-cut flanges provide a superior seal to prevent warping or leaking under high thermal stress. The high-temperature ceramic coating is rated up to 1300°F, effectively lowering under-hood temperatures while protecting the headers from corrosion.

• Manufacturer Part Number: GP500S-C
• 1-5/8 in. mandrel-bent 16-gauge 409L stainless steel tubing
• 3/8 in. thick heavy-duty laser-cut port flanges for a leak-free seal
• High-temperature silver ceramic coating (rated to 1300°F)
• 50-state street legal; meets EPA and CARB requirements
• Direct replacement for factory manifolds; no welding required
• Includes premium gaskets and all necessary mounting hardware

Fits select 1998-2011 Ford Ranger and Mazda B-Series pickups, including B2300, B2500, B3000, and B4000 models (2.3L).

The Gibson Dual Split Cat-Back Exhaust System (MPN 9508) is engineered for enthusiasts seeking an aggressive, throaty tone and improved engine efficiency. By reducing backpressure through mandrel-bent 1.75-inch tubing, this system facilitates better exhaust flow to help maximize torque and horsepower. The dual exit design features polished stainless steel slash-cut tips that exit straight out the rear, compatible with most factory bumpers and trailer hitches.

At the core of the system is the Superflow™ muffler, a baffled and chambered design that eliminates the need for internal packing that can deteriorate over time. This configuration delivers a deep, powerful exterior sound while maintaining minimal interior drone for a comfortable cabin experience. Designed as a true bolt-on upgrade, this kit uses factory-style hangers for a hassle-free installation with no welding required.

• 1.75-inch aluminized mandrel-bent tubing for consistent flow and durability
• Baffled and chambered Superflow™ Muffler with no internal packing to blow out
• Dual polished stainless steel slash-cut tips for a premium, high-performance look
• Simple bolt-on installation utilizing factory mounting points
• Aggressive exhaust note with reduced interior resonance
• Includes all required hardware for a complete install
• Manufacturer Part Number: 9508

The Gibson SFT Superflow Muffler 758300S is engineered to deliver an authoritative "big block" exhaust note while maintaining a quiet interior cabin environment. Unlike traditional performance mufflers that rely on fiberglass packing or mesh screens, the SFT series utilizes a precision baffled and chambered internal design. This construction ensures long-term sound consistency and volume efficiency with no internal materials to blow out or deteriorate over time.

Built for durability and performance, this muffler is manufactured from fully welded stainless steel to withstand harsh undercar conditions. The design focuses on providing unrestricted exhaust flow to improve usable pulling power and low-end torque. With its 8x24-inch body, 3-inch offset inlet, and dual 2.25-inch outlets, it offers a high-flow solution for custom exhaust configurations.

• Part Number: 758300S
• Material: Fully welded stainless steel
• Design: Baffled and chambered (no packing or screens)
• Body Dimensions: 8in Round x 24in Length
• Inlet Diameter: 3in (Offset)
• Outlet Diameter: 2.25in (Dual)
• Warranty: Lifetime Limited Warranty

The Gibson Patriot Series Rolled Edge Slash-Cut Exhaust Tip (71-1013) offers a rugged, high-performance aesthetic for your exhaust system. Engineered from premium T304 stainless steel, this tip features an exclusive high-temperature Black Ceramic coating designed to withstand extreme thermal cycles without peeling or fading. The integrated brushed stainless Patriot Series badge with the American flag adds a distinct, patriotic look to your tailpipe.

Designed for a hassle-free installation, this round tip utilizes a built-in clampless connection. This allows for a secure bolt-on fit to your existing 2.5-inch to 2.75-inch piping without the need for specialized welding or cutting. The rolled edge and aggressive slash-cut profile provide a refined finish that holds up against the elements, backed by a limited lifetime warranty.

• Manufacturer Part Number: 71-1013
• Material: T304 Stainless Steel
• Finish: Black Ceramic Coating
• Outer Diameter (OD): 5 inches
• Inlet Diameter: 2.5 to 2.75 inches
• Length: 12 inches
• Edge Style: Round Rolled Edge Slash-Cut
• Mounting: Built-in clampless bolt-on design
• Warranty: Lifetime Limited Warranty
• Manufacturing: Made in the USA

Fits 1999-2004 Ford F-250 and F-350 Super Duty models (5.4L).

The Gibson Super Truck Cat-Back Exhaust System is engineered to deliver a powerful race-inspired rumble and significant performance increases for your 5.4L Ford Super Duty. This system features a distinctive dual-tailpipe design that exits in front of the rear tires, finished with polished stainless steel tips for a custom, aggressive profile. Constructed from 2.5-inch mandrel-bent stainless steel tubing, it maximizes exhaust flow to provide dyno-tested gains of 10-15 horsepower and 15-20 lb-ft of torque.

At the core of the system is the Superflow baffled muffler, designed without internal packing to maintain a consistent deep tone while minimizing interior drone. The entire kit is designed for a hassle-free, bolt-on installation using factory mounting points with no welding required. Note that this high-performance system is not recommended for towing and may exceed 95-decibel sound standards.

• Direct-fit cat-back system with dual side-exit configuration
• 2.5-inch mandrel-bent stainless steel tubing for optimal flow
• Baffled and chambered Superflow muffler with no internal packing
• Includes stainless steel clampless sport truck tips
• Dyno-tested gains of 10-15 HP and 15-20 lb-ft of torque
• Easy bolt-on installation with no welding or specialized tools required
• Manufacturer Part Number: 69517
• Backed by a Limited Lifetime Warranty

Fits 2015-2020 Cadillac Escalade ESV (6.2L).

The Gibson Black Elite Series Dual Split Exhaust system provides your Cadillac Escalade ESV with a significant upgrade in both style and acoustic presence. Engineered to deliver a rich, deep exhaust note without excessive interior drone, this system utilizes a Superflow CFT stainless performance muffler featuring a baffled and chambered design with no internal packing to blow out over time. The mandrel-bent stainless steel tubing ensures maximum flow, while the dual rear exit configuration gives the vehicle a balanced, aggressive profile.

Finished with T-304 stainless steel tips featuring a proprietary black ceramic coating, this kit is built for long-term durability and resistance to the elements. The 100% bolt-on installation uses factory-style hangers and included hardware for a straightforward setup in your driveway or shop.

• Superflow CFT Stainless Performance Muffler (Baffled/Chambered design)
• 3.5-inch to 2.25-inch mandrel-bent stainless steel tubing
• Dual black ceramic rolled slash-cut T-304 stainless steel tips
• Aggressive exterior sound profile with minimal interior cabin drone
• Direct bolt-on installation using factory mounting points
• Includes all necessary hardware and factory-style hangers
• Manufacturer Part Number: 65677B
• Lifetime Limited Warranty; Made in the USA

Fits 2010-2014 Chevrolet Tahoe and GMC Yukon (5.3L). This cat-back system is designed for the SUV owner who wants an aggressive exterior sound and increased performance without excessive interior cabin drone.

The Gibson Dual Sport Exhaust (MPN: 65640) features a Superflow baffled/chambered muffler that provides an authoritative, deep tone while improving exhaust scavenging. Built from 2.25-inch mandrel-bent stainless steel tubing, the system optimizes flow for dyno-proven gains of approximately 10-15 horsepower and 15-20 lb-ft of torque. The dual exit behind the rear tire is specifically designed to clear tow trailers and maintain a clean look on the street or trail.

Installation is a straightforward, bolt-on process using factory-style hangers and included hardware, requiring no welding. The system is finished with dual polished stainless steel slash-cut tips for a professional appearance.

• Baffled/chambered Superflow muffler (no internal packing)
• 2.25-inch stainless steel mandrel-bent tubing
• Dual polished stainless round slash-cut clamp-on tips
• Bolt-on installation with factory-style hangers and hardware included
• Backed by a Manufacturer Lifetime Limited Warranty
• MPN: 65640

Fits 2015-2022 Chevrolet Colorado and GMC Canyon models (2.5L).

The Gibson Dual Extreme Cat-Back Exhaust (MPN 65587) is engineered for drivers seeking an aggressive stance and a powerful exhaust note. This system features a dual exit located behind the rear tires at an angle, providing a distinct performance look while delivering dyno-tested performance improvements. Drivers can expect average gains of 15-20 horsepower through improved exhaust scavenging.

This system is constructed from 2.25-inch mandrel-bent stainless steel tubing to ensure consistent flow and long-term durability. It features the Superflow™ CFT muffler, which utilizes a baffled and chambered design with no internal packing to maintain sound quality and minimize interior drone. The installation is a straightforward bolt-on process using factory-style hangers, requiring no welding.

• System Type: Cat-Back Exhaust
• Exit Style: Dual Extreme (Behind rear tires)
• Tubing Diameter: 2.25-inch mandrel-bent stainless steel
• Muffler Type: Superflow™ CFT (Baffled/Chambered)
• Tips: Polished stainless steel slash-cut clamp-on
• Installation: Bolt-on; all hardware and factory-style hangers included
• Part Number: 65587
• Warranty: Lifetime Limited Warranty

Fits select 2015-2022 Chevrolet Colorado and GMC Canyon models (2.5L).

The Gibson Dual Split Cat-Back Exhaust system (MPN 65586) is engineered for owners seeking an aggressive, throaty exhaust note and improved engine efficiency. By reducing backpressure through the use of a Superflow baffled and chambered muffler, this system helps produce more torque and horsepower compared to the restrictive factory setup. The 2.25-inch mandrel-bent stainless steel tubing ensures consistent diameter through every bend to maintain exhaust velocity, while the dual polished slash-cut tips exit straight out the back for a symmetrical, custom look.

• T304/409 Stainless steel mandrel-bent tubing for corrosion resistance and optimal flow
• Superflow muffler features a baffled and chambered design with no internal packing to blowout
• Delivers an aggressive exterior sound while maintaining minimal interior drone
• Dual polished stainless steel slash-cut tips for a premium finish
• Hassle-free bolt-on installation using factory-style hangers and included hardware
• No welding required for installation
• Compatible with most rear bumpers, roll pans, and trailer hitches
• Manufacturer Part Number: 65586
• Backed by a Lifetime Limited Warranty

Fits 2007-2010 Cadillac Escalade (Base/Platinum) and GMC Yukon Denali (6.2L).

The Gibson Dual Extreme Cat-Back Exhaust system is engineered for the enthusiast looking for an aggressive exterior sound and a bold street presence. This system features a unique exit behind the rear tires at a high angle, delivering a powerful exhaust note while keeping interior resonance to a minimum. Built around the Superflow™ CFT (Counter Flow Technology) muffler, this system uses a baffled and chambered design with no internal packing to maintain consistent sound quality over the life of the vehicle.

Constructed from 3-inch mandrel-bent stainless steel tubing, this kit ensures maximum exhaust flow and corrosion resistance. The system is a complete bolt-on solution that utilizes factory-style hangers for a straightforward installation with no welding required. Each kit is finished with polished stainless steel slash-cut clamp-on tips for a refined, performance-oriented look.

• Manufacturer Part Number: 65402
• Tubing Diameter: 3-inch mandrel-bent stainless steel
• Muffler Type: Superflow™ CFT (Baffled/Chambered)
• Exit Style: Dual Extreme (behind rear tires)
• Tips: Polished stainless steel slash-cut clamp-on
• Installation: Bolt-on; no welding required; includes all hardware
• Warranty: Lifetime Limited Warranty

Fits 1989-1994 Ford Ranger Custom, S Plus, Splash, Sport, STX, XL, and XLT models equipped with the 2.3L engine.

Improve your truck's low-end power and acceleration with the Gibson Single Side Cat-Back Exhaust System. This system is engineered specifically for maximum torque and horsepower gains in the 1800 to 3000 RPM range, providing average increases of 10-15 horsepower and 15-20 lb-ft of torque. The included Superflow muffler utilizes a baffled and chambered design without internal packing, delivering an aggressive exterior sound while keeping interior drone to a minimum for a quieter cab environment.

• 2.5-inch stainless steel mandrel-bent tubing for optimized exhaust flow
• Superflow™ baffled and chambered muffler with no internal packing
• Single side exit located behind the rear tire
• Polished stainless steel slash-cut exhaust tip
• Hassle-free bolt-on installation using factory-style hangers; no welding required
• Includes all necessary mounting hardware
• Manufacturer Part Number: 619710
• Backed by a Lifetime Limited Warranty

Fits select 1997-2001 Ford Explorer and 1998-2001 Mercury Mountaineer (4.0L). This Gibson single-exit cat-back system is designed to provide reliable performance gains and an aggressive exhaust note without excessive interior drone.

Built from 2.5-inch stainless steel mandrel-bent tubing, this system features the Gibson Superflow Superflow™ muffler. The baffled and chambered muffler design utilizes no internal packing that can blow out over time, ensuring a consistent sound for the life of the vehicle. The system exits straight out the rear and is finished with a polished stainless steel slash-cut tip. Installation is a straightforward bolt-on process using factory-style hangers and included hardware.

• Main Piping Diameter: 2.5in
• Material: Stainless steel mandrel-bent tubing
• Muffler Type: Superflow™ baffled and chambered (no internal packing)
• Exit Style: Single rear exit
• Tip Description: Polished stainless steel slash-cut tip
• Installation: Bolt-on with included hardware and factory-style hangers
• Performance: Average gains of 5-10 horsepower
• Manufacturer Part Number: 619687
• Warranty: Lifetime Limited Warranty

Fits 1987-1996 Ford Bronco models equipped with the 5.0L engine, including Custom, Eddie Bauer, XL, and XLT trims.

The Gibson Single Side Exhaust system is engineered to provide increased low-end torque and horsepower, specifically in the 1,800 to 3,000 RPM range where towing and daily driving power are most critical. This cat-back system replaces the restrictive factory exhaust with 3-inch mandrel-bent stainless steel tubing to maintain consistent flow and reduce backpressure. At its core is the Superflow™ baffled and chambered muffler, designed to deliver an aggressive external sound while remaining remarkably quiet inside the cab with minimal interior drone.

Installation is a straightforward bolt-on process using factory-style hangers and included hardware, requiring no welding. The system exits behind the rear tire and is finished with a polished stainless steel slash-cut tip for a professional, clean look.

• Material: 3-inch mandrel-bent stainless steel tubing
• Muffler: Superflow™ baffled and chambered design (no internal packing)
• Exit: Single side exit behind rear tire
• Tip: Polished stainless steel slash-cut tip
• Hardware: Includes all necessary zinc-plated clamps and factory-style hangers
• Warranty: Lifetime Limited Warranty
• Part Number: 619675

Fits 2001-2007 Toyota Sequoia Limited and SR5 models equipped with the 4.7L engine.

The Gibson Single Exhaust system is engineered to deliver reliable performance gains and an aggressive exhaust note while maintaining low interior drone levels. This cat-back system replaces the restrictive factory piping with 2.5-inch mandrel-bent stainless steel tubing to improve exhaust flow. At the heart of the system is the Superflow™ baffled and chambered muffler; because it uses no internal packing or mesh, the sound profile remains consistent over time without blowing out.

This exhaust is designed as a direct bolt-on upgrade, utilizing factory-style hangers and including all necessary hardware for a secure fit. The system exits behind the rear tire and is finished with a polished stainless steel slash-cut tip for a clean, professional appearance. Professional results can be expected with a straightforward installation process that requires no welding.

• Main Piping: 2.5-inch mandrel-bent stainless steel tubing
• Muffler Type: Superflow™ baffled and chambered (no internal packing)
• Exit Style: Single rear exit with polished stainless steel slash-cut tip
• Installation: Bolt-on using factory-style hangers and included hardware
• Performance: Designed for average gains of 5-10 horsepower
• Warranty: Lifetime Limited Warranty
• Manufacturer Part Number: 618900

Fits select 1995-1998 Toyota T100 models including Base, DLX, DX, and SR5 trims equipped with the 3.4L engine.

The Gibson Single Side Exhaust system is engineered to provide immediate gains in low-end torque and horsepower, specifically between 1,800 and 3,000 RPM. This makes it an ideal upgrade for Toyota T100 owners looking for improved hill climbing, towing stability, and passing power. The system features 2.5-inch mandrel-bent stainless steel tubing to ensure consistent exhaust flow and longevity in harsh conditions.

At the core of this system is the Superflow™ Muffler. Its baffled and chambered design eliminates the need for internal packing that can blow out over time, maintaining a consistent, aggressive external sound while minimizing interior cab drone. Installation is a straightforward bolt-on process using factory-style hangers and included hardware, requiring no welding.

• Main Piping: 2.5-inch stainless steel mandrel-bent tubing
• Muffler Type: Superflow™ Baffled/Chambered (No internal packing)
• Exit Location: Single side exit behind the rear tire
• Tip: Polished stainless steel slash-cut tip
• Performance Gains: Average 10-15 HP and 15-20 lb-ft torque increase
• Installation: Direct bolt-on; hardware and factory-style hangers included
• Manufacturer Part Number: 618806
• Warranty: Lifetime Limited Warranty

Fits 2006-2011 Honda Element EX, LX, and SC models (2.4L).

The Gibson Stainless Cat-Back Single Exhaust System is engineered to provide reliable performance and an aggressive exhaust note without the excessive interior drone often found in aftermarket systems. This system features 2.25-inch mandrel-bent stainless steel tubing to ensure consistent exhaust flow and reduced backpressure. At the heart of the system is the Superflow CFT muffler, a baffled and chambered design that contains no internal packing to wear out or blow out over time.

Installation is straightforward and hassle-free, utilizing factory-style hangers and included hardware for a direct bolt-on fit. Drivers can expect average performance gains of 5-10 horsepower. The system exits straight out the back and is finished with a polished stainless steel round slash-cut tip for a clean, professional appearance.

• 2.25-inch mandrel-bent stainless steel tubing
• Superflow CFT baffled/chambered muffler for consistent sound
• Polished stainless steel round slash-cut tip
• Direct bolt-on installation with included hardware and factory-style hangers
• Average gains of 5-10 horsepower
• No internal packing to blow out
• Lifetime Limited Warranty
• Manufacturer Part Number: 614001

Fits 2007-2009 Hummer H2 Base (6.2L).

The Gibson Single Exhaust system is engineered for drivers seeking reliable performance and an aggressive exhaust note. This cat-back system features high-flow 3.5-inch mandrel-bent stainless steel tubing to reduce restriction and improve efficiency. At the core of the system is the Superflow™ CFT Muffler, a baffled and chambered design that contains no internal packing to blow out or deteriorate over time. This configuration provides a deep, powerful sound while maintaining minimal interior drone.

Designed for a straightforward installation, this kit includes all necessary hardware and utilizes factory-style hangers for a secure, bolt-on fit. The system exits straight out the rear of the vehicle, finished with a polished stainless steel round slash-cut tip for a refined look.

• Main Piping: 3.5-inch mandrel-bent stainless steel tubing
• Muffler Type: Superflow™ CFT (Baffled/Chambered, no internal packing)
• Tip: Polished stainless round slash-cut design
• Installation: Bolt-on with included hardware and factory-style hangers
• Performance: Engineered for average gains of 5-10 horsepower
• Warranty: Lifetime Limited Warranty
• Manufacturer Part Number: 612501

Fits 2004-2011 Infiniti QX56 and Nissan Armada models (5.6L).

The Gibson Single Side Exhaust system is engineered to provide increased low-end torque and horsepower, specifically between 1,800 and 3,000 RPM. This makes it an ideal upgrade for heavy-duty applications such as towing, hauling, or climbing steep grades. Built from 3-inch mandrel-bent stainless steel tubing, this system ensures consistent exhaust flow without the restrictive bottlenecks found in factory crimp-bent pipes.

At the core of the system is the Superflow™ muffler. Featuring a baffled and chambered design with no internal packing to blow out over time, it delivers a deep, aggressive exterior tone while maintaining a quiet, drone-free experience inside the cabin. Installation is a straightforward bolt-on process using professional-grade hardware and factory-style hangers, requiring no welding or specialized tools. The system is finished with a polished stainless steel slash-cut tip that exits behind the rear passenger-side tire.

• 3-inch mandrel-bent stainless steel tubing for maximum flow
• Superflow™ baffled/chambered muffler (no internal packing)
• Includes polished stainless steel slash-cut exhaust tips
• Average gains of 10-15 HP and 15-20 lb-ft of torque
• Hassle-free bolt-on installation with factory-style hangers
• No welding required for assembly
• Manufacturer Part Number: 612213
• Lifetime Limited Warranty

Fits 2000-2002 Nissan Xterra SE and XE models (3.3L).

Designed for the Nissan enthusiast seeking improved low-end torque and towing performance, the Gibson Single Side Exhaust system delivers power gains specifically in the 1,800 to 3,000 RPM range. This cat-back system utilizes 2.25-inch stainless steel mandrel-bent tubing to maintain consistent exhaust flow and reduce backpressure. At the heart of the system is the Superflow™ muffler, a baffled and chambered design that eliminates internal packing while providing an aggressive exterior note with minimal interior cab drone.

Installation is a straightforward bolt-on process using factory-style hangers and the included hardware, requiring no welding. The system is finished with a polished stainless steel slash-cut tip that exits behind the rear tire for a professional look and sound.

• Manufacturer Part Number: 612203
• Tubing Diameter: 2.25-inch stainless steel mandrel-bent
• Muffler: Superflow™ Baffled and Chambered (No internal packing)
• Tip: Polished stainless steel slash-cut
• Fitment: Replaces factory exhaust from the catalytic converter back
• Installation: Bolt-on using factory hangers; no welding required
• Warranty: Limited Lifetime Warranty

Fits 1998-2000 Nissan Frontier SE and XE (2.4L).

Improve your truck's low-end power and exhaust note with the Gibson Single Side Cat-Back Exhaust System. Engineered as a direct bolt-on upgrade, this system uses 2.5-inch mandrel-bent stainless steel tubing to maximize flow and efficiency. It is specifically tuned to deliver increased torque and horsepower in the 1,800 to 3,000 RPM range, making it an ideal solution for towing, passing, and improved throttle response.

At the heart of the system is the Superflow™ baffled and chambered muffler. Unlike packed mufflers that degrade over time, this chambered design maintains its sound quality for the life of the vehicle, providing an aggressive exterior tone while keeping interior cab noise to a minimum. The system exits behind the rear tire and is finished with a polished stainless steel slash-cut tip for a clean, professional appearance.

• Tubing: 2.5-inch mandrel-bent stainless steel for consistent flow
• Muffler: Superflow™ baffled/chambered design with no internal packing to blow out
• Exit: Single side exit behind rear passenger tire
• Tip: Polished stainless steel slash-cut tip included
• Installation: Easy bolt-on fitment; includes factory-style hangers and all necessary hardware
• Performance: Optimizes low-end torque and horsepower for better towing and acceleration
• Part Number: 612201
• Warranty: Manufacturer Lifetime Limited Warranty

Fits select 1987-1996 Ford Bronco models (5.0L).

The Gibson Single Side Exhaust system is engineered to deliver improved low-end performance, specifically targeting horsepower and torque gains in the 1,800 to 3,000 RPM range. This 3-inch cat-back system is constructed from mandrel-bent aluminized tubing to ensure consistent flow and durability. It features a Superflow™ baffled and chambered muffler that provides an aggressive exterior sound profile while remaining quieter in the cab than many performance alternatives.

• Performance Gains: Typical increases of 10-15 HP and 15-20 lb-ft of torque for improved towing and passing power.
• High-Flow Construction: 3-inch mandrel-bent aluminized steel tubing maintain constant diameter through bends.
• Superflow™ Muffler: Baffled and chambered design with no internal packing to blow out over time.
• Installation: Direct bolt-on design includes all hardware and factory-style hangers; no welding required.
• Finish: Includes a polished stainless steel slash-cut tip for a professional look.
• Exit Style: Single side exit behind the rear tire.
• Manufacturer Part Number: 319675

Fits 2007-2021 Toyota Tundra models with the 4.7L engine. The Gibson Single Side Cat-Back Exhaust is engineered to provide increased low-end torque and horsepower, making it an ideal choice for towing, passing, and improved acceleration. This system utilizes a Superflow muffler with a baffled and chambered design, ensuring maximum flow without the need for internal packing that can degrade over time.

Dyno-tested to deliver average gains of 10-15 horsepower and 15-20 lb-ft of torque between 1,800 and 3,000 RPM, this exhaust provides an aggressive exterior note while maintaining a quiet cab environment. The 3-inch mandrel-bent aluminized tubing ensures consistent exhaust flow, and the entire system bolts directly to factory mounting points for a straightforward installation without the need for welding.

• Baffled and chambered Superflow muffler (no internal packing)
• 3-inch mandrel-bent aluminized steel tubing
• Polished stainless steel slash-cut tip
• Minimal interior drone with an aggressive exterior sound
• Includes all necessary hardware and factory-style hangers
• Bolt-on installation requires no welding
• Manufacturer Part Number: 18603
• Lifetime Limited Warranty

Fits select 2005-2019 Nissan Frontier models including Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, and SV (4.0L).

The Gibson Superflow Single Side Exhaust system is engineered for the Nissan Frontier owner who needs improved low-end torque and horsepower for towing, hauling, and off-road performance. Designed to produce maximum power between 1800 and 3000 RPM, this system utilizes a Superflow baffled and chambered muffler with no internal packing to maintain a consistent, aggressive tone without excessive interior drone. The system exits behind the rear tire, providing a clean look and improved clearance.

Constructed from heavy-duty aluminized mandrel-bent tubing, this 3-inch cat-back system ensures smooth exhaust flow. It features a completely bolt-on installation using factory-style hangers and includes all necessary hardware, requiring no welding or specialized tools. The system is finished with a polished stainless steel slash-cut tip for a professional appearance.

• Baffled/chambered Superflow muffler for maximum low-end torque
• 3-inch aluminized mandrel-bent tubing for optimal flow
• Polished stainless steel slash-cut tip
• Hassle-free, bolt-on installation with factory-style hangers
• Average gains of 10-15 HP and 15-20 lb-ft of torque
• Manufacturer Part Number: 12211
• Lifetime Limited Warranty

Fits 2007-2014 Chevrolet Avalanche, Suburban 1500, and GMC Yukon XL 1500 (5.3L).

The Gibson Dual Extreme Cat-Back Exhaust system is engineered for drivers seeking an aggressive, performance-oriented tone with a distinctive look. This system features dual tailpipes that exit at an angle behind the rear tires, providing a bold aesthetic and high-clearance functionality. At the heart of the system is the Superflow CFT muffler, a baffled and chambered design with no internal packing to blow out, ensuring a consistent, powerful sound with minimal interior drone.

Constructed from aluminized mandrel-bent tubing, this kit is designed to optimize exhaust flow. The 2.25-inch diameter piping helps produce average gains of 15-20 horsepower while maintaining the backpressure needed for low-end torque. The system is finished with polished stainless steel slash-cut tips for a premium look. Installation is a straightforward bolt-on process using factory-style hangers, requiring no welding or specialized fabrication.

• System Type: Cat-Back Dual Extreme
• Main Piping Diameter: 2.25-inch
• Material: Aluminized Mandrel-Bent Tubing
• Muffler Type: Superflow™ CFT (Baffled/Chambered)
• Tips: Polished Stainless Slash-Cut Clamp-On
• Installation: Bolt-on; no welding required
• Manufacturer Part Number: 5572
• Warranty: Lifetime Limited Warranty

Fits select 2006-2009 Chevrolet Trailblazer and GMC Envoy (4.2L).

The Gibson Single Side Exhaust system is engineered to provide increased low-end torque and horsepower, specifically targeting the 1800 to 3000 RPM range. This makes it an ideal upgrade for 4.2L Trailblazer and Envoy owners looking for improved acceleration, towing capability, and passing power. The system utilizes 2.5-inch aluminized mandrel-bent tubing to maintain consistent flow and a Superflow™ baffled/chambered muffler that delivers an aggressive exterior note with minimal interior drone.

Designed for a hassle-free, bolt-on installation, this kit uses factory-style hangers and requires no welding. The exhaust exits behind the rear tire and is finished with a polished stainless steel slash-cut tip for a clean, professional appearance.

• Main Piping: 2.5-inch aluminized mandrel-bent tubing
• Muffler Type: Gibson Superflow™ baffled and chambered (no internal packing)
• Exit Location: Single side, exits behind rear tire
• Tip Style: Polished stainless steel slash-cut
• Installation: Bolt-on, no welding required; includes hardware and factory-style hangers
• Performance: Tested average gains of 10-15 HP and 15-20 lb-ft of torque
• Manufacturer Part Number: 315599
• Warranty: Lifetime Limited Warranty

Fits 2007-2014 Toyota FJ Cruiser Base, Trail Teams Special Edition, and TRD Special Edition models (4.0L).

The Gibson Dual Split Cat-Back exhaust system is designed for the FJ Cruiser enthusiast looking for an aggressive, throaty exhaust note and improved performance. This system features Gibson’s Superflow™ muffler, a baffled and chambered design with no internal packing to blow out, ensuring consistent sound quality over the life of the vehicle. By reducing backpressure, this exhaust helps generate increased horsepower and torque for better off-road and highway capability.

Constructed from 2.5-inch aluminized mandrel-bent tubing, this kit maintains constant diameter through every bend to maximize flow. The system exits behind each rear tire for a balanced look and includes polished T304 stainless steel slash-cut tips. Designed as a direct bolt-on replacement, it uses factory mounting points for a hassle-free installation with no welding required.

• Main Piping: 2.5in aluminized mandrel-bent tubing
• Muffler Type: Superflow™ baffled/chambered (no internal packing)
• Exit Style: Dual rear exit (one behind each rear tire)
• Tips: Polished stainless steel slash-cut tips
• Installation: Bolt-on design; no welding or cutting required
• Includes all necessary hardware and hangers
• Manufacturer Part Number: 18808
• Limited Lifetime Warranty

The Gibson SFT Superflow Stainless Steel Muffler (758216S) is engineered to deliver a powerful, deep exterior exhaust note while maintaining a quiet cabin environment. Designed specifically for performance and towing applications, this muffler improves volume efficiency and provides unrestricted flow to help generate more usable pulling power and torque.

Unlike standard performance mufflers that rely on fiberglass packing or screens that can degrade and blow out over time, the SFT Superflow features a proprietary baffled and chambered internal design. The 100% welded stainless steel construction ensures long-term durability and consistent sound quality throughout the life of the vehicle.

• Construction: Heavy-duty, fully welded stainless steel for maximum corrosion resistance.
• Internal Design: Baffled and chambered configuration with no packing or screens to blow out.
• Performance: Optimized for increased torque and horsepower with reduced interior resonance (drone).
• Configuration: Round body with a center inlet and dual outlets.
• Manufacturer Part Number: 758216S

Fits 2020-2026 Chevrolet Silverado 2500 HD and 3500 HD models.

The Gibson Black Elite Series cat-back exhaust system (Part #616518B) delivers a refined, deep exhaust note while significantly upgrading the visual profile of your truck. Engineered for the 2020-2026 Silverado HD, this system is constructed from 3.5-inch mandrel-bent stainless steel tubing to maintain consistent flow and reduce backpressure. At the center of the system is Gibson’s Superflow muffler, which uses a baffled and chambered design rather than internal packing to ensure a consistent sound that won't degrade over time.

The signature feature of the Black Elite line is the T-304 stainless steel tips, finished in a proprietary black coating for extreme durability against heat and road debris. This kit is a direct-fit upgrade designed for simple installation and is backed by a limited lifetime warranty.

• 3.5-inch mandrel-bent stainless steel tubing
• Baffled and chambered Superflow muffler (8-inch oval body)
• T-304 stainless steel rolled slash-cut tips with premium black finish
• Minimal interior drone with a deep, mild exterior tone
• No internal packing to blow out or deteriorate
• Clamp-on installation with included hardware
• Made in the USA
• Manufacturer Part Number: 616518B