The Nitrous Express 15934 Standalone Battery Mount provides a dedicated 12V power source for your race vehicle's accessories without drawing from the primary starting battery. This mount is designed to house a Milwaukee M18 Series Lithium battery, allowing you to run high-draw components like nitrous bottle heaters in the staging lanes without the risk of a no-start condition.

This mounting plate offers flexible installation options, engineered to bolt directly to any flat surface or integrate seamlessly with Nitrous Express roll bar mounts. It is an ideal solution for isolating sensitive electronics or heavy-duty 12V accessories from the main vehicle harness, ensuring consistent voltage and protecting your primary electrical system.

• Manufacturer Part Number: 15934
• Compatibility: Milwaukee M18 Series Lithium batteries
• Output: Powers almost any 12V accessory
• Mounting: Flat surface or compatible NX roll bar mounts
• Construction: Durable mounting plate for secure battery retention

Fits 2021-2024 Ford F-150 trucks (5.0L).

The Nitrous Express Ford 5.0L nitrous plate system (MPN: 20959-10) utilizes proprietary Spraybarless technology to provide superior atomization and distribution. The billet aluminum plate installs directly between the factory throttle body and intake manifold, featuring integrated solenoids for a low-profile look and simplified plumbing. Installation is further streamlined with a direct-plug-in fuel line adapter, removing the requirement to cut or modify your factory fuel lines.

For reliable operation, the system includes a TPS Auto Learn switch that limits nitrous activation to wide-open throttle (WOT) conditions. This complete kit provides adjustable power levels through included jetting and all the heavy-duty hardware required for a professional-grade installation.

• Adjustable jetting included: 35, 50, 75, 100, 125, 150, 200, and 250 horsepower
• 10lb nitrous bottle featuring the Lightning 500 billet aluminum valve
• Precision-machined billet nitrous plate with integrated solenoids
• Stainless steel braided N2O line and stainless bottle brackets
• Includes master arming switch, relay, relay harness, and installation hardware

Fine-tune your nitrous system for maximum efficiency with the Nitrous Express Hitman Plus Gasoline Jet Pack (40041JP). Designed specifically for gasoline applications ranging from 50 to 200 horsepower, these jets are precision-manufactured on state-of-the-art CNC equipment. Every NX jet is held to an exacting tolerance, guaranteed to be within .0005-inch of the specified orifice size for consistent, repeatable performance.

Unlike standard jets that are simply drilled through brass, the Hitman Plus series features an engineered, contoured inlet and a multi-stepped outlet. This sophisticated design promotes turbulence-free flow and eliminates restrictions, allowing these jets to out-flow the competition by up to 35% through the same orifice size. This increased flow efficiency ensures more accurate fueling and more predictable power gains.

• CNC-machined brass construction for extreme precision
• Tight tolerances held to within .0005" of specified size
• Contoured inlet and multi-stepped outlet for laminar, turbulence-free flow
• Provides up to 35% more flow than standard competitor jets
• Power range: 50-200 HP
• Fuel type: Gasoline
• Manufacturer Part Number: 40041JP

Fits 2010-2015 Chevrolet Camaro LS, LT, SS, Z/28, and ZL1 models.

This Nitrous Express Plate System is engineered for the 5th Generation Camaro, utilizing Phase 3 Spraybarless technology to ensure superior nitrous atomization and cylinder distribution. The kit features a CNC-machined billet aluminum plate that installs directly between the throttle body and intake manifold. For a professional, uncluttered engine bay, the solenoids are integrated directly into the plate assembly.

The system includes a TPS Autolearn switch, ensuring nitrous activation only occurs at wide-open throttle (WOT) and automatically deactivates when the accelerator is released. This complete kit provides jetting for 35, 50, 75, 100, and 150 horsepower, with the capacity to support up to 250 horsepower with additional jetting.

• Manufacturer Part Number: 20931-10
• Phase 3 Spraybarless technology for optimal fuel/nitrous mixing
• Integrated solenoid design for a clean installation
• 10lb nitrous bottle with stainless steel mounting brackets
• Braided stainless steel lines for durability and pressure resistance
• TPS Autolearn switch for precise WOT activation
• Includes all necessary hardware, electrical connectors, and arming switch

Fits 1979-1995 Ford Mustang and 1979-1986 Mercury Capri models with the 5.0L pushrod engine.

The Nitrous Express 5.0L nitrous plate system for pushrod-style engines utilizes advanced spraybarless technology to ensure superior atomization and fuel distribution. This billet aluminum plate is designed for a streamlined installation, replacing the factory EGR spacer and bolting directly between the throttle body and intake. To maintain a clean engine bay, the solenoids are integrated into the plate while remaining fully rebuildable for long-term service.

This kit includes a fuel line adapter to simplify the setup, removing the need to cut factory fuel lines. It offers extensive adjustability with included jetting for 35, 50, 75, 100, 125, 150, 200, and 250 WHP. For maximum performance and reliability, the system features the billet aluminum Lightning 500 bottle valve and stainless steel bottle brackets.

• Integrated Performance: Billet nitrous plate with integrated solenoids replaces the OE EGR spacer.
• Complete Fueling Solution: Includes fuel line adapter and extra-long stainless braided N2O and fuel lines.
• Adjustable Output: Jetting included for power levels ranging from 35 to 250 WHP.
• Premium Hardware: 10lb bottle with Lightning 500 valve and stainless bottle brackets.
• Installation Components: Master arming switch, WOT activation switch, relay, relay harness, and all necessary hardware included.
• MPN: 20955-10

Engineered for high-performance applications using Holley Hi-Ram intake manifolds, the Nitrous Express 20940-10 nitrous plate kit installs directly between the upper and lower plenum. This innovative design delivers nitrous and fuel into each cylinder from the side of the runner, achieving precise, direct-port-style distribution without the airflow restriction of traditional spray bars or nozzles protruding into the intake path.

Constructed from CNC-machined billet aluminum, the plate features internal passages that eliminate the risk of spray bars breaking or rotating under pressure. This single-stage system includes adjustable jetting to support power levels from 50 to 500 WHP. For maximum reliability and response, the kit features Lightning Solenoids constructed from billet aluminum and carbon fiber.

• Fits Holley Hi-Ram manifolds
• Power output adjustable from 50 to 500 WHP
• CNC-machined billet aluminum plate with internal passages
• Lightning series billet/carbon fiber solenoids
• Includes 10lb nitrous bottle with Lightning 500 billet valve
• Stainless steel bottle brackets and braided lines
• Complete with wiring, switches, and all necessary mounting hardware
• Manufacturer Part Number: 20940-10

The Nitrous Express (NX) HP Series jets are engineered for racers who demand absolute precision in fuel and nitrous metering. Each .042 R/T single jet (MPN 17042) is manufactured using advanced CNC equipment to ensure a tolerance within .0005 of the specified orifice size.

Unlike standard jets that are simply drilled through brass, the HP jet features a proprietary design including a contoured inlet and a multi-stepped outlet. This internal architecture eliminates turbulence and restrictions, allowing for up to 35% more flow through the same orifice size compared to competing designs. This ensures consistent, predictable performance every time you activate the system.

• Manufacturer Part Number: 17042
• Orifice Size: .042
• Material: CNC-machined brass
• Tolerance: Guaranteed within .0005-inch of specification
• Design: Contoured inlet with multi-stepped outlet for turbulence-free flow

Ensure precise nitrous delivery and professional-grade plumbing with the Nitrous Express 8-Cylinder Stainless Steel Tubing Kit. Designed for high-pressure performance and long-term durability, this kit provides the essential hard-line components required to plumb a direct-port nitrous system on 8-cylinder engines.

Constructed from high-quality stainless steel, these tubes are resistant to corrosion and designed to maintain structural integrity under extreme pressure. The kit includes sixteen individual tubes in varying lengths to accommodate different intake manifold configurations and nozzle placements. Each kit is supplied with the necessary B-Nuts for secure, leak-free connections to your distribution blocks and nitrous nozzles.

• Manufacturer Part Number: 80085
• Material: High-strength stainless steel
• Configuration: 8-Cylinder direct port applications
• Tubing lengths included: (4) 14-inch, (4) 16-inch, (4) 20-inch, and (4) 24-inch tubes
• Includes B-Nuts for installation

Nitrous Express HP Series jets are engineered for precise nitrous system calibration and maximum flow efficiency. Unlike standard jets that function as a simple orifice, the .082 R/T single jet is designed with a proprietary contoured inlet and a multi-stepped outlet. This specific geometry eliminates internal turbulence and restrictions, allowing these HP jets to flow up to 35% more than competing jets with the same orifice diameter.

Every jet is manufactured on high-precision CNC equipment to maintain strict tolerances. Nitrous Express guarantees each jet is within .0005" of the specified size, providing the consistency required for reliable tuning and engine safety.

• Manufacturer Part Number: 17082
• Jet Size: .082
• Construction: CNC-machined brass
• Manufacturing Tolerance: Within .0005 inch
• Flow Design: Contoured inlet and multi-stepped outlet for turbulence-free flow

The Nitrous Express Piranha Nozzle (MPN 70001) is engineered for precision fuel and nitrous atomization in performance applications. Featuring a compact 1/16 NPT threaded body and a 90-degree discharge angle, this patented nozzle is ideal for installations where space is limited and maximum power production is required.

To ensure long-term reliability and ease of maintenance, the Piranha Nozzle is equipped with stainless steel jet fittings. This upgrade significantly reduces the risk of broken fittings during jet changes compared to softer materials. Rated for a maximum flow of 150 horsepower, it provides the consistent distribution needed for safe and effective horsepower gains.

• Manufacturer Part Number: 70001
• Thread Size: 1/16 NPT
• Discharge Angle: 90 Degrees
• Maximum Flow: 150 HP
• Fitting Material: Stainless Steel
• Patented design for superior atomization

The Nitrous Express Stage 6 system is a high-performance nitrous solution designed for 4150 4-BBL gasoline applications. This system features the Phase 3 "Next Generation" spraybarless plate technology, which provides superior fuel atomization and distribution without the airflow restrictions or mechanical risks associated with traditional spray bars. By eliminating spray bars that can sag, split, or block flow, the Phase 3 plate ensures consistent power delivery and maximum reliability for sportsman racers.

• Adjustable power settings from 50 HP to 300 HP
• Phase 3 spraybarless plate for optimized airflow and distribution
• Includes Lightning solenoids with limited lifetime warranty
• Complete system with a 10lb nitrous bottle and stainless steel bottle brackets
• Heavy-duty 40-amp relay and extra-long supply line included
• Designed for 4150 flange carburetors running gasoline
• Manufacturer Part Number: 30040-10

The Nitrous Express .067 R/T Series HP Jet is engineered for maximum flow consistency and precision tuning. Unlike standard jets which are often simple orifices drilled through brass, NX HP jets are CNC-manufactured to a strict tolerance of within .0005 of the specified jet size. This ensures that your fueling and nitrous delivery remain predictable and repeatable.

The internal geometry of the HP jet is designed to maximize volume without increasing the physical orifice size. By utilizing a contoured inlet and a proprietary multi-stepped outlet, these jets eliminate internal restrictions and promote turbulence-free flow. In testing, this specialized design allowed the HP series to outflow competing jets of the same orifice size by 35%.

• Part Number: 17067
• Jet Size: .067
• Series: R/T HP Single Jet
• Material: CNC-machined brass
• Tolerance: Guaranteed within .0005 of specification
• Flow Characteristics: Contoured inlet and multi-stepped outlet for 35% higher flow capacity

Nitrous Express (NX) HP Series jets are precision-engineered for tuners who demand absolute consistency and maximum flow. Each jet is manufactured using advanced CNC equipment and is guaranteed to be within .0005 of the specified orifice size. The HP jet design is a significant evolution over standard brass jets, utilizing a proprietary internal geometry to optimize fluid dynamics.

By incorporating a contoured inlet and a multi-stepped outlet, these jets eliminate the turbulence and restrictions found in basic orifice designs. This high-flow architecture allows the HP series to flow up to 35% more than competing jets of the same size, providing more reliable and predictable nitrous delivery for your system.

• Jet Size: .040
• Series: HP R/T Single Jet
• Material: CNC-machined brass
• Tolerance: Guaranteed within .0005 of specification
• Flow Characteristics: Contoured inlet and multi-stepped outlet for turbulence-free flow
• MPN: 17040

Precision tuning is the difference between a clean pass and a melted piston. The Nitrous Express .039 R/T Single Jet is engineered for racers who demand absolute consistency in their nitrous system. Unlike standard jets that are simply a hole drilled through brass stock, these HP jets are CNC-machined with a contoured inlet and a multi-stepped outlet. This internal geometry ensures turbulence-free, laminar flow, allowing these jets to outflow the competition by up to 35% through the same orifice size.

• Manufacturer Part Number: 17039
• Orifice Size: .039
• Precision Machining: Guaranteed within .0005 of specified size
• Material: High-grade brass construction for durability and corrosion resistance
• Flow Optimization: Contoured inlet and multi-stepped outlet eliminate flow restrictions
• Performance: Designed for higher flow rates and more predictable tuning than standard jets

The Nitrous Express HP Series .038 R/T Single Jet is engineered for precision fuel and nitrous metering. CNC-manufactured to exacting standards, these jets are guaranteed to maintain a tolerance within .0005-inch of the specified orifice size. Unlike standard jets that are simply a hole drilled through brass, the HP series features a proprietary design for maximum efficiency.

The contoured inlet and multi-stepped outlet work together to eliminate turbulence and restrictions. In flow testing, this design allows the HP jet to flow 35% more than competing jets of the same orifice size, ensuring more consistent performance and tuning accuracy for your nitrous system.

• Orifice Size: .038
• Manufacturer Part Number: 17038
• Precision CNC-machined brass construction
• Contoured inlet and multi-stepped outlet for laminar flow
• Tight tolerances held to +/- .0005-inch
• Designed for 35% increased flow over standard orifice designs

Nitrous Express R/T Series single jets are precision-engineered for maximum flow consistency in nitrous oxide systems. Each HP jet is manufactured on CNC equipment and guaranteed to be within .0005 of the specified orifice size, ensuring predictable tuning and engine safety for your nitrous-fed application.

The unique design of the R/T jet features a contoured inlet and a multi-stepped outlet. This specialized geometry eliminates the turbulence and restrictions commonly found in standard "drilled hole" jets, promoting a laminar flow profile. This design improvement allows these HP jets to flow up to 35% more than competing jets of the same orifice diameter.

• Orifice Size: .037
• Material: Precision-machined brass
• Series: HP R/T Series
• Design: Contoured inlet with multi-stepped outlet for turbulence-free flow
• Manufacturing: CNC-machined to +/- .0005 tolerance
• Manufacturer Part Number: 17037

Ensure precise nitrous delivery with the Nitrous Express HP Series .033 R/T Single Jet. Unlike standard jets that are simply drilled through brass, the HP series is engineered with a proprietary contoured inlet and multi-stepped outlet. This advanced internal geometry eliminates restrictions and facilitates turbulence-free flow, allowing these jets to outperform competitors by up to 35% through the same orifice size.

Each jet is manufactured using high-precision CNC equipment and is guaranteed to be within .0005 of the specified jet size. This rigorous tolerance provides the consistency required for high-performance tuning, ensuring predictable fueling and nitrous ratios for engine safety and maximum power output.

• Manufacturer Part Number: 17033
• Jet Size: .033
• Series: HP R/T Single Jet
• Material: Precision-machined brass
• Manufacturing: CNC-machined for .0005-inch tolerance
• Flow Design: Contoured inlet with multi-stepped outlet for 35% increased flow

Fine-tune your nitrous system with the precision-engineered Nitrous Express .026 R/T Series Single Jet. Manufactured on CNC equipment, these HP jets are guaranteed to be within .0005 of the specified orifice size, ensuring consistent and predictable tuning for your fueling or nitrous requirements.

Unlike standard jets that are simply a hole drilled through brass, the NX R/T jet features a proprietary contoured inlet and a multi-stepped outlet. This design minimizes restriction and allows for turbulence-free flow, resulting in up to 35% more flow through the same orifice size compared to competitors.

• Manufacturer Part Number: 17026
• Jet Size: .026
• Construction: CNC-machined brass for maximum durability and precision
• Tolerance: Guaranteed within .0005 of specified size
• Design: Contoured inlet and multi-stepped outlet for optimized flow dynamics
• Performance: Engineered to outflow standard orifice designs by up to 35%

Optimizing your nitrous system requires precision fueling and flow consistency. The Nitrous Express (NX) .025 R/T Series Single HP Jet is engineered to surpass standard brass jets through superior fluid dynamics. Manufactured on precision CNC equipment, each jet is guaranteed to remain within .0005 of the specified orifice size, providing the accuracy necessary for high-performance tuning.

The HP jet series is designed with a specialized internal geometry rather than a simple straight-through bore. By utilizing a contoured inlet and a multi-stepped outlet, these jets facilitate turbulence-free flow with minimal restrictions. This advanced design allows the HP jet to outflow competitive designs by as much as 35% through the same orifice size, ensuring your system receives maximum volume without sacrifice.

• Jet Size: .025
• Manufacturer Part Number: 17025
• Construction: CNC-machined brass for extreme durability and precision
• Tolerance: Guaranteed within .0005 of specified size
• Flow Dynamics: Contoured inlet and multi-stepped outlet for 35% higher flow volume
• Series: R/T HP Jet

The Nitrous Express .021 R/T Single Jet (MPN 17021) is a precision-engineered component designed for consistent, high-performance nitrous delivery. Unlike standard jets that are simply drilled through brass, NX HP Jets are manufactured using advanced CNC equipment to maintain a strict tolerance within .0005 of the specified orifice size.

The R/T jet features a specialized internal geometry with a contoured inlet and a multi-stepped outlet. This design is engineered to eliminate restrictions and promote turbulence-free flow, providing up to 35% more flow capacity than competing jets of the same orifice diameter. This superior flow characteristic ensures more predictable tuning and reliable performance for your nitrous system.

• Jet Size: .021
• Manufacturing Process: Precision CNC machined
• Tolerance: Within .0005 of specified size
• Flow Feature: Contoured inlet and multi-stepped outlet
• Material: High-quality brass construction
• Manufacturer Part Number: 17021

Precision tuning requires absolute consistency, and the Nitrous Express HP Series .016 R/T single jet is engineered to provide exactly that. Unlike standard jets that are simply drilled through brass, these HP jets are manufactured on advanced CNC equipment and are guaranteed to maintain a tolerance within .0005 of the specified orifice size. This precision ensures predictable and repeatable performance every time the system is activated.

The NX HP jet is designed for maximum efficiency, featuring a technical contoured inlet and a multi-stepped outlet. This specific geometry eliminates internal turbulence and removes flow restrictions, allowing these jets to flow up to 35% more than competing designs of the same diameter. This increased flow capacity ensures your engine receives the most stable and unrestricted nitrous delivery possible.

• Jet Size: .016 R/T
• Manufacturing: CNC machined for precision
• Tolerance: Guaranteed within .0005 inches
• Design Features: Contoured inlet and multi-stepped outlet for turbulence-free flow
• Manufacturer Part Number: 17016

The Nitrous Express Pure-Flo Y-fitting (MPN 16386) is engineered to eliminate the flow restrictions and turbulence common in standard soldered or stepped fittings. Unlike traditional manifold designs that rely on internal joints, the Pure-Flo series is CNC-machined from a single piece of solid 6061-T6 billet aluminum bar stock. This one-piece construction ensures a smooth, uninterrupted internal flow path, providing maximum fluid velocity for high-demand nitrous or fuel delivery systems.

• Manufacturer Part Number: 16386
• Inlet/Outlet: 6AN x 6AN x 6AN
• Material: 6061-T6 Billet Aluminum bar stock
• Finish: Black Anodized for corrosion resistance
• Design: One-piece, joint-free, turbulence-free internal flow path
• Construction: No soldering, internal steps, or joints

The Nitrous Express Maximizer Solo (16012) is a compact, gauge-mountable progressive nitrous controller designed for precise delivery management. Built to fit standard 2-1/16 inch gauge pods, this unit enables racers to fine-tune nitrous flow through a programmable 5-point time-based ramp. This customization allows for smooth power engagement that matches track conditions and available traction. Integrated safety features including RPM and Throttle Position Sensor (TPS) cutoffs protect the engine by ensuring nitrous only flows when specific operating parameters are met.

• Compact 2-1/16 inch design for easy interior gauge pod mounting
• Programmable 5-point time-based nitrous ramp for precise flow control
• Optional activation delay for customized power delivery off the line
• Integrated RPM and TPS cutoffs for enhanced engine safety
• Comprehensive kit includes controller module, wiring harness, and solenoid
• Manufacturer Part Number: 16012

Ensure consistent fuel delivery to your engine with the Nitrous Express 15952 Fuel Pressure Regulator. This non-bypass style regulator is designed for high-performance applications that require precise pressure management without a return line. The compact, robust housing is engineered for durability under high-demand conditions, making it an essential component for fine-tuning your fuel system's performance.

• Manufacturer Part Number: 15952
• Design: Non-bypass fuel pressure regulator
• Porting: 1/8-inch NPT gauge port for easy monitoring
• Included Components: Analog fuel pressure gauge
• Documentation: Includes installation instructions, warranty information, and certificate of origin

The Nitrous Express 15728 Solenoid Bracket provides a clean, adjustable mounting solution for your nitrous system on 4150-series carburetors. This bracket installs directly between the carburetor and the intake manifold, creating a stable, professional platform for fuel and nitrous solenoids without the need for custom fabrication or drilling.

• Precision Adjustability: Each solenoid mount is designed to swivel on the main plate, allowing you to find the perfect orientation for optimal line routing and engine bay clearance.
• Direct Fitment: Engineered specifically for use with 4150 flange carburetors and matching intake manifolds.
• Robust Design: Provides a rigid mounting point to prevent solenoid vibration and ensure consistent performance under high-load conditions.
• MPN: 15728

Protect your engine from catastrophic lean conditions with the Nitrous Express 15708 Heavy Duty Fuel Pressure Safety Switch. Specifically designed for carbureted fuel systems, this switch serves as a critical safeguard by automatically deactivating the nitrous system if fuel pressure drops below your set threshold, preventing lean-out engine damage and backfires.

• Manufacturer Part Number: 15708
• Adjustable Range: 3-10 psi shut-off
• Application: Carbureted fuel systems
• Construction: Heavy-duty design for high-vibration automotive environments
• Included: Certificate of Origin and manufacturer warranty

The NX 15708 ensures your nitrous solenoids only engage when there is sufficient fuel supply, providing peace of mind during high-demand passes. It is a necessary component for any serious nitrous-fed carbureted setup.

The Nitrous Express 15158-6 Remote Shutoff Nitrous Valve offers a critical layer of safety and convenience for high-performance nitrous systems. This component allows the driver to open or close the main nitrous supply from within the cabin, eliminating the need to manually access the bottle valve before a pass or in an emergency situation.

Engineered for maximum flow, this valve features a large 0.500-inch internal orifice and a direct-flow design. This architecture ensures that the valve does not become a restriction in your nitrous line, maintaining consistent bottle pressure and delivery to the solenoid. Each unit is produced and assembled in the USA, following strict testing protocols to ensure reliability under high-pressure conditions.

• 6AN male inlet and outlet for seamless integration with standard nitrous supply lines
• Large 0.500" internal orifice supports high-horsepower applications
• Direct-flow design minimizes turbulence and pressure drop
• Enables remote bottle activation for improved safety and staging efficiency
• Assembled in the USA to Nitrous Express quality standards
• Manufacturer Part Number: 15158-6

The Nitrous Express 11703 Bottle Nut is a precision-engineered hardware component designed to securely attach a 4AN or 6AN nipple to Nitrous Express 326 series bottle valves. This nut provides the necessary clamping force to ensure a leak-free seal between the delivery nipple and the valve body, maintaining system pressure integrity.

• Secures 4AN or 6AN nipples to the bottle valve
• Compatible with Nitrous Express 326 NX brass and chrome-plated valves
• High-strength construction for reliable high-pressure sealing
• Manufacturer Part Number: 11703

Ensure a secure, leak-free connection for your nitrous system with the Nitrous Express 11701 4AN Bottle Nipple. Engineered specifically for use with NX chrome bottle valves (326 NX Valve), this fitting provides the critical interface between the bottle valve and your 4AN main feed line.

Precision-machined for durability and exact fitment, this nipple is a direct replacement or upgrade component for standard NX bottle configurations. Please note that the mounting nut required for installation is not included and must be purchased separately.

• Brand: Nitrous Express
• Part Number: 11701
• Fitting Size: 4AN
• Application: Fits NX 326 Chrome Bottle Valves
• Required Hardware: Nut sold separately (Part # 11703)

Maintaining consistent nitrous bottle pressure is critical for predictable engine performance and repeatable track times. The Nitrous Express 2-1/16in N2O Pressure Gauge & Controller (MPN 15531G) provides real-time monitoring and automated bottle heater management directly from the driver's seat.

This integrated controller allows you to set a specific target nitrous pressure. Once configured, it automatically cycles your NX bottle heater on and off to maintain that set point, eliminating the guesswork of manual switches. To ensure system longevity, the gauge features a 5-psi buffer zone below the target pressure, which prevents rapid relay flickering and protects your heater components from premature wear.

• Manufacturer Part Number: 15531G
• Gauge Size: 2-1/16 inch (52mm) for standard pod mounting
• Control Logic: Automated heater activation based on user-defined pressure targets
• Relay Protection: Integrated 5-psi buffer zone to prevent rapid heater cycling
• Visibility: Digital display for accurate at-a-glance pressure readings