Maximize the cooling and octane-enhancing potential of your water-methanol injection system with Snow Performance Boost Juice. This proprietary fluid is a precision-blended mix of 49% methanol and 51% distilled water, specifically formulated to provide a consistent increase in effective octane and a significant reduction in intake air temperatures. By using a pre-mixed solution, you eliminate the risk of inconsistent ratios or mineral buildup from non-distilled water sources that can degrade pump seals and clog injection nozzles over time.

Manufactured in the U.S.A. within a controlled environment, Boost Juice ensures that the ratio is exact in every bottle, allowing for precise engine tuning and predictable performance gains. This case provides a bulk supply of four one-gallon containers, ideal for high-consumption applications and ensuring you always have fluid ready for the street or track.

• Proprietary blend: 49% methanol / 51% distilled water
• Optimized for maximum cooling and octane boost
• Manufactured in the USA for strict quality and ratio control
• Safe for all Snow Performance and standard water-methanol injection kits
• Quantity: Case of 4 Gallons

Royal Purple Max-Restore is a concentrated fuel system treatment engineered specifically for high-mileage vehicles to restore lost performance and fuel economy. Formulated with a high concentration of polyether amine (PEA) and specialized detergents, this treatment aggressively breaks down stubborn carbon deposits on fuel injectors, intake valves, and combustion chambers that accumulate over thousands of miles.

• Replaces clogged injector flow with restored spray patterns for improved combustion.
• High-dose PEA formula cleans intake valves and combustion chamber deposits.
• Creates a protective barrier on metal surfaces to inhibit the formation of new deposits.
• Optimizes fuel economy and smooths out rough idling caused by fuel system fouling.
• Safe for use in all gasoline engines.

Specifications:
Manufacturer Part Number: Max-Restore
Size: 6oz bottle

Royal Purple Max-Clean is a professional-grade synthetic fuel system cleaner and stabilizer formulated to restore engine performance and fuel economy. Over time, carbon buildup on critical components leads to rough idling, decreased throttle response, and poor gas mileage. Max-Clean penetrates these stubborn deposits to thoroughly clean fuel injectors, carburetors, intake valves, and combustion chambers.

As a dual-purpose treatment, it also stabilizes fuel during storage and protects the entire fuel system against corrosion. Regular use helps minimize emissions and prevents the hesitation or stalling caused by fouled components, keeping your vehicle running at peak efficiency.

• Restores fuel economy and maximizes engine horsepower
• Deep cleans fuel injectors, carburetors, intake valves, and combustion chambers
• Prevents rough idling, hesitation, and stalling
• Stabilizes fuel and prevents corrosion in the fuel system
• Compatible with gasoline and diesel engines, including 4-cycle and 2-cycle applications
• Container Size: 20 oz

Properly seating piston rings while protecting sensitive valvetrain components is the most critical phase of a new engine's life. Royal Purple Engine Break-In Oil is formulated with highly refined mineral base stocks—the industry standard for initial run-in—to facilitate rapid ring seating against cylinder walls. This specialized formula is heavily fortified with elevated levels of zinc and phosphorus (ZDDP) anti-wear additives to provide the extreme pressure protection required by flat-tappet camshafts and high-tension valve springs during the sensitive break-in period.

• Formulated with high-quality mineral base stocks to promote quick piston ring seating
• Contains elevated zinc/phosphorus (ZDDP) levels for critical valvetrain and camshaft protection
• Exceeds API SJ performance requirements for engine break-in applications
• Optimizes wear protection for new or rebuilt engines during the initial run-in phase
• Sold in individual 1-quart (0.946L) bottles

Red Line Friction Modifier & Break-In Additive is a concentrated treatment for clutch-type limited-slip (LSD) and posi-traction units. Designed to eliminate differential chatter, this additive significantly reduces friction during the critical gear break-in period, lowering operating temperatures by as much as 50°F.

This formula allows for precise tuning of differential lock-up. It provides the necessary slipperiness to prevent plate binding and noise without compromising the performance of the friction plates. Fully compatible with both petroleum-based and synthetic gear oils, it is a versatile solution for street and performance applications.

• Eliminates chatter in clutch-type limited slip and posi-traction units
• Reduces break-in temperatures by as much as 50°F
• Compatible with both petroleum and synthetic gear oils
• Concentrated 4 oz bottle
• Recommended use: Add 1oz at a time until chatter is eliminated

Red Line Lead Substitute is engineered to protect vintage and high-performance engines originally designed for leaded gasoline. By providing the lubrication necessary to prevent valve seat recession (VSR), this additive ensures the longevity of cylinder heads in engines that have not been retrofitted with hardened valve seats.

In addition to hardware protection, the formula provides active cleaning for the fuel system, removing stubborn deposits from carburetors and fuel injectors to maintain optimal spray patterns and throttle response. It is specifically intended for racing, marine, and off-road applications where leaded fuel protection is required.

• Prevents valve seat damage and premature wear in engines designed for leaded fuels
• Cleans carburetor deposits and fuel injectors for improved fuel atomization
• One 12oz bottle treats up to 25 gallons of gasoline
• Safe for use in vehicles equipped with catalytic converters
• Intended for racing, marine, or off-road use only

Red Line Complete Fuel System Cleaner is a concentrated treatment formulated to restore performance across the entire fuel path of motorcycles, ATVs, and personal watercraft. This chemical cleaner targets carbon deposits on intake valves and combustion chambers while purging carburetors, fuel injectors, and fouled spark plugs to eliminate hesitation and stalling.

• Cleans fuel lines, tanks, intake valves, and combustion chambers to restore lost power
• Lubricates upper cylinders and reduces octane demand for smoother operation
• Safe for modern emission control systems, including catalytic converters and oxygen sensors
• Compatible with pump gas, race fuel, and both pre-mixed or injected two-stroke engines
• Improves fuel economy, throttle response, and overall idle stability
• Concentrated 4oz bottle provides a complete clean-up for street bikes, dirt bikes, and powersports

Red Line 4-Cycle Alcohol Fuel Lubricant is engineered to protect high-performance engines from the corrosive and abrasive nature of alcohol-based fuels. Methanol, nitromethane, and E85 are "dry" fuels that can wash essential lubrication from the cylinder walls and fuel system components. This additive restores that lubrication, improving ring seal and protecting against gelling and corrosion within the fuel system.

During dyno testing, adding one bottle to 20 gallons of race gas demonstrated a 1.5% increase in torque due to improved ring seal. The formula is designed to be undetectable by standard fuel tests and mixes thoroughly with only slight agitation. It effectively replaces the lubrication lost to fuel wash, extending the life of upper cylinder components and fuel pumps.

• Fuel Compatibility: Suitable for use with E85, methanol, and nitromethane.
• Treatment Ratio: 1oz per 5 gallons of fuel; one 12oz bottle treats up to 55 gallons.
• Performance: Improves ring seal for increased power and torque.
• Protection: Prevents gelling and corrosion in methanol and nitromethane systems.
• Compatibility Note: Do not use in vehicles equipped with catalytic converters.

Motul Engine Clean is a specialized internal engine cleaner designed to be used in all types of gasoline and diesel engines immediately before a scheduled oil change. Over time, oxidized oil and combustion by-products form deposits, varnish, and sludge that can restrict oil flow and cause piston rings to stick. This additive effectively dissolves these contaminants and keeps them in suspension so they are fully evacuated when the old oil is drained.

By cleaning the entire lubrication circuit, this treatment helps restore engine compression, reduces oil and fuel consumption, and prevents the immediate contamination of your fresh engine oil. Regular use maintains optimal engine protection and performance across a variety of operating conditions.

• Dissolves sludge, carbon deposits, and varnish from oil passages and components
• Restores engine compression by freeing stuck rings and valves
• Protects new oil from residual contamination for a cleaner service interval
• Compatible with catalytic converters and diesel particulate filters (DPF)
• Formulated for both naturally aspirated and turbocharged engines
• Volume: 300ml

LIQUI MOLY DIJectron is a specialized fuel additive engineered for the unique maintenance requirements of modern Gasoline Direct Injection (GDI) engines. Using advanced Polyetheramine (PEA) technology, this formula breaks down and removes stubborn carbon deposits that accumulate on injector tips and within the combustion chamber, which standard additives often fail to reach.

By restoring precise fuel atomization, DIJectron ensures an optimal air-fuel mixture for improved efficiency and throttle response. Crucially, regular application helps mitigate the risk of Low Speed Pre-Ignition (LSPI)—a common phenomenon in downsized, turbocharged GDI engines that can lead to catastrophic internal damage. This additive also leaves a protective film throughout the fuel system to guard against corrosion caused by moisture and ethanol-blended fuels.

• Advanced PEA (Polyetheramine) chemistry targets deposits in and around the injector tip
• Reduces the risk of engine damage caused by Low Speed Pre-Ignition (LSPI)
• Tested and safe for use with catalytic converters and gasoline particulate filters (GPF)
• Restores fuel economy and reduces exhaust emissions by optimizing combustion
• Protects the entire fuel system from corrosion and wear
• Assures precise fuel atomization for better drivability

LIQUI MOLY Pro-Line Turbocharger Additive provides essential initial lubrication for new or replaced turbochargers, preventing catastrophic damage due to oil starvation during the first engine start. Because a turbocharger can suffer terminal bearing failure within seconds if not properly primed, this high-pressure lubricant coats internal components to ensure protection during the critical running-in phase.

• Protects against dry-start damage caused by lack of oil during the initial start-up and running-in phase.
• Fully miscible with all commercially available mineral and synthetic motor oils.
• Offers outstanding emergency-running properties for newly installed turbocharger units.
• Supports a proper break-in process to prevent premature wear and costly secondary repairs.
• Increases overall operational reliability of the forced induction system.

LIQUI MOLY Pro-Line Engine Flush is a professional-grade cleaning additive designed to dissolve sludge, lacquer, and solid contaminants within the engine oil circuit. By neutralizing deposits before an oil change, this formula ensures that new oil remains clean and effective for its entire service interval. It is compatible with most commercially available motor oils and is safe for use in engines equipped with oil-running timing belts.

To use, add the 500mL contents to the engine oil while at operating temperature. Allow the engine to idle for 10 to 15 minutes depending on the level of contamination, then immediately drain the oil and replace the filter. This process provides a rapid yet gentle cleaning of the internal components without attacking common sealing materials.

• Cleans and flushes internal engine oil circuits
• Tested safe for turbochargers, catalytic converters, and Diesel Particulate Filters (DPF)
• One 500mL can treats up to 5 liters (1.3 gallons) of oil
• Minimum oil filling of 3 liters (0.8 gallons) required for optimum performance
• Simple application before standard oil changes
• Note: Not suitable for use in motorcycles with wet clutches

LIQUI MOLY Pro-Line Fuel Injection Cleaner is a concentrated professional-grade additive designed to restore engine performance by removing stubborn carbon deposits from intake valves and the combustion chamber. This formula ensures precise fuel atomization and restores efficient combustion, which helps lower fuel consumption and reduce pollutant emissions.

Engineered for professional maintenance, this cleaner is ideal for use during routine inspections, after fuel system repairs, or following a Jet-Clean operation. It mixes automatically with the fuel to maintain the reliability and efficiency of the entire injection system.

• Removes carbon deposits from intake valves and combustion chambers
• Ensures precise fuel atomization for optimized combustion
• Reduces pollutant emissions and improves fuel economy
• Increases operational reliability of the fuel system
• Cleans and maintains internal injection components

• Volume: 500mL
• Minimum Fuel Volume: 25 Liters (7 Gallons) for optimum performance
• Maximum Treatment Capacity: 70 Liters (18 Gallons) of fuel
• Application: Pour directly into fuel tank

Hybrid powertrains present a specific set of challenges for the internal combustion engine. Because the engine may remain dormant for long periods or cycle frequently during electric-only driving, fuel can sit in the lines and tank, leading to oxidation and gummy deposits. LIQUI MOLY Hybrid Additive is formulated specifically to treat these conditions, acting as both a stabilizer and a high-performance cleaner for late-model hybrid fuel systems.

This additive effectively cleans the injection system and combustion chamber, ensuring optimum performance when the engine is called upon. By stabilizing the fuel against aging and oxidation, it prevents degradation and protects metal components against corrosion throughout the entire fuel system.

• Engineered specifically for the unique requirements of modern hybrid engines
• Cleans injection systems and combustion chambers to restore efficiency
• Stabilizes fuel over extended service times to prevent oxidation and aging
• Provides superior corrosion protection for fuel system components
• Suitable for engines with both intake-manifold (port) and direct injection
• Helps reduce pollutant and CO2 emissions through improved combustion

LIQUI MOLY Truck Series Complete Diesel System Cleaner is a professional-grade fuel additive designed to restore performance and maintain the health of diesel fuel systems. Whether used as a preventive measure or a curative treatment for acute engine issues, this formula effectively removes stubborn deposits from the injectors and combustion chambers. It is suitable for all diesel engines, including modern high-pressure Common Rail and pump-injector systems.

• Comprehensive Cleaning: Removes carbon and soot deposits from the entire fuel system to restore proper injector spray patterns.
• Combustion Improvement: Specifically formulated to boost the cetane number, improving ignition quality and overall engine efficiency.
• Smooth Operation: Effectively eliminates diesel knocking and reduces pollutant emissions by ensuring a more complete fuel burn.
• Application and Dosage: Add directly to the fuel tank. One 500mL can is sufficient for up to 115 liters (30 gallons) of fuel. A minimum fuel level of 25 liters (7 gallons) is required for the additive to function optimally.
• Mixing: Self-mixing formula requires no additional steps after pouring into the tank.

LIQUI MOLY Speed Tec Gasoline is a high-performance fuel additive engineered to sharpen throttle response and improve drivability, particularly under partial load conditions. By optimizing fuel atomization and ensuring more complete combustion, this formula helps the engine extract maximum energy while cleaning the fuel system of performance-robbing deposits.

• Optimizes fuel atomization for improved combustion efficiency
• Noticeably enhances throttle response and acceleration
• Safe for use in all gasoline engines and tested for compatibility with catalytic converters
• Contains no organometallic compounds
• Formula does not alter the octane rating of the fuel
• Cleans and protects the fuel system from internal deposits
• 250mL container volume

Liqui Moly Motor Oil Saver is a specialized additive designed to stop engine oil leaks by rejuvenating hardened rubber and plastic seals. By restoring seal elasticity, it addresses common maintenance issues such as oil spots on the driveway and blue exhaust smoke caused by oil bypass through worn valve stem seals.

This self-mixing formula is compatible with all standard motor oils and can be added at any time. The chemical sealing process takes effect after approximately 400 to 500 miles (600–800 km) of operation. To ensure a lasting seal and continued reduction in oil consumption, reapplication is recommended every 20,000 miles (30,000 km).

• Maintains and regenerates rubber and plastic engine seals
• Reduces engine oil consumption and prevents blue smoke
• Damps engine noise for quieter operation
• Treats 3L to 5L (3.17–5.28 US QT) of engine oil
• Self-mixing formula for easy application
• Volume: 300mL

LIQUI MOLY Jectron is a professional-grade gasoline additive formulated to eliminate heavy carbon deposits from fuel injectors, intake valves, and combustion chambers. By cleaning the entire injection system, Jectron restores precise fuel atomization and correct air-fuel ratios, directly addressing issues like rough idling, poor throttle response, and increased exhaust emissions.

• Removes carbon buildup from intake valves and combustion chambers
• Optimizes fuel consumption and reduces exhaust emission values
• Ensures precise fuel atomization for improved drivability
• Provides robust corrosion protection throughout the fuel system
• Tested safe for use with catalytic converters
• One 300mL can treats up to 75 liters (20 gallons) of fuel
• Requires a minimum of 25 liters (7 gallons) of fuel for optimal mixing and performance

LIQUI MOLY Super Diesel Additive is a concentrated treatment formulated to clean, protect, and maintain the entire diesel fuel system. This additive effectively prevents deposit build-up, keeps injection nozzles clean, and protects high-pressure fuel pumps and injectors from premature wear by significantly increasing lubrication. By boosting the Cetane number, it ensures more efficient combustion, easier cold starts, and smoother idling while helping to reduce emissions.

This formula is specifically engineered for all diesel engines and is safe for use with catalytic converters and low-sulfur diesel fuels. Regular application prevents injector needles from seizing or gumming up, ensuring the fuel system remains in optimal condition for consistent performance and fuel economy.

• Cleans and maintains diesel fuel injection systems
• Boosts Cetane number for improved engine performance and easier starting
• Increases lubricating effect to protect fuel pumps and injectors from wear
• Prevents corrosion and the formation of harmful deposits
• Compatible with low-sulfur diesel fuels and catalytic converters
• Size: 300mL

Carbon deposits on intake valves and within the combustion chamber can lead to poor idling, increased fuel consumption, and lost engine performance. LIQUI MOLY Valve Clean is a specialized fuel additive designed to remove these stubborn residues, restoring proper fuel flow and ensuring optimal combustion for all gasoline engines.

This formula is safe for use in vehicles equipped with turbochargers and catalytic converters. It provides effective corrosion protection throughout the fuel system and helps prevent carburetor icing in colder climates. For best results, 150mL of Valve Clean should be added to the fuel tank; one bottle treats up to 75 liters (20 gallons) of fuel. A minimum fuel volume of 25 liters (7 gallons) is required for the product to perform at its peak concentration.

• Removes deposits and residues on valves and in the combustion chamber
• Restores engine performance and reduces fuel consumption
• Burns ash-free and is environmentally friendly
• Provides reliable corrosion protection for the fuel system
• Tested for compatibility with turbochargers and catalytic converters
• Prevents carburetor icing
• Suitable for standard, high-octane, leaded, and unleaded gasoline

LIQUI MOLY Hydraulic Lifter Additive reduces engine noise by cleaning internal valve bores and improving the lubrication properties of the motor oil. This treatment is formulated to dampen the characteristic ticking or clicking associated with hydraulic tappets, restoring smoother operation to the valvetrain.

• Dampens hydraulic tappet and lifter noise
• Cleans valve bores and oil passages to restore proper hydraulic function
• Tested for compatibility with turbochargers and catalytic converters
• Improves overall lubrication properties of the engine oil
• One 300mL can treats up to 6 liters (1.5 gallons) of motor oil
• Manufacturer Part Number: 20004

This additive can be introduced to the crankcase at any time. After adding the product, run the engine until it reaches full operating temperature. For a lasting effect, reapply LIQUI MOLY Hydraulic Lifter Additive during every oil change.

LIQUI MOLY Cera Tec is a high-tech anti-wear additive engineered for most 4-stroke engines, manual transmissions, and compressors. Utilizing a unique combination of high-tech ceramic compounds and chemical anti-wear agents, it creates a protective barrier that prevents direct metal-to-metal contact. This reduces internal friction and wear, significantly increasing engine service life while optimizing fuel consumption in both gasoline and diesel engines.

• Miscibility: Fully miscible with all commercially available motor oils.
• System Compatibility: Tested and safe for use with turbochargers, catalytic converters, and Diesel Particulate Filters (DPF).
• Thermal Stability: Provides excellent high and low temperature behavior and remains stable under extreme pressures.
• Filtration: Chemically inert and compatible with fine filters; leaves no deposits in the oiling system.
• Performance: Reduces frictional losses and increases smooth operation through highest thermal stability.

Each 300mL container is designed to treat the engine or transmission oil capacity to provide long-lasting protection against wear.

DeatschWerks 107R Race Octane Booster is engineered for high-performance and competition engines that require increased octane levels to prevent detonation and pre-ignition (knock). This specialized additive allows tuners and drivers to run more aggressive ignition timing and higher boost pressures by improving the stability of the fuel charge under high load.

• Brand: DeatschWerks
• Product Line: 107R
• Manufacturer Part Number: 1-107R-CS
• Volume: 32 oz. per can
• Quantity: Case of 8 cans
• Application: High-performance and racing engines

Supplied in a case of eight 32oz. cans, this bulk pack ensures you have a consistent supply for track days or high-performance events where maintaining fuel quality is essential for engine safety and peak power output.