Fits 2010-2024 Toyota 4Runner models.

The Rival aluminum skid plate provides heavy-duty protection for the most vulnerable driveline components under your Toyota 4Runner. This armor system shields the transmission and transfer case from impact damage during off-road use, while also acting as a robust deterrent against catalytic converter theft. By utilizing high-strength aluminum, Rival delivers essential underside defense without the significant weight penalty of traditional steel plating.

Designed for a precise fit, this skid plate mounts directly to factory points to ensure a straightforward installation that preserves maximum ground clearance. Whether you are navigating technical trails or looking for added security against theft in urban environments, this comprehensive skid plate is a vital upgrade for your 5th Gen 4Runner build.

• Complete coverage for transmission, transfer case, and catalytic converters
• Constructed from high-strength, lightweight aluminum for durability
• Corrosion-resistant finish designed for harsh off-road environments
• Bolt-on installation using existing factory mounting locations
• Manufacturer Part Number: 2333.9543.2.6

Fits 2024-2026 Ford Ranger Raptor models.

The RIVAL Front Aluminum Bumper provides a significant upgrade in protection and utility for the Ford Ranger Raptor without the excessive weight of a traditional steel bumper. Engineered for off-road durability, this bumper replaces the factory unit with a high-strength aluminum shell that resists corrosion and maintains front-end suspension geometry. It integrates seamlessly with the truck's aggressive styling while adding essential recovery capabilities for technical trail use.

• High-strength aluminum construction for weight savings and impact resistance
• Integrated internal winch mount for self-recovery operations
• Reinforced recovery points for secure shackle attachment
• Corrosion-resistant finish designed for harsh environments
• Manufacturer Part Number: 2D.1813.1.US

Fits select 2007-2025 Jeep Wrangler (JK/JL) and 2020-2025 Jeep Gladiator (JT) models.

The Rival Front Aluminum Bumper provides heavy-duty front-end protection without the weight penalty of a traditional steel plate bumper. Constructed from 1/4-inch thick aluminum alloy, this bumper is designed for durability and superior corrosion resistance. It includes an integrated 1/4-inch aluminum skid plate to protect vulnerable steering and suspension components, along with a heavy-duty steel winch mount rated for up to 12,000 lbs.

This bumper is a full replacement for the factory unit and features a bolt-on grill guard with integrated provisions for auxiliary lighting. For recovery situations, it includes two reinforced recovery points with a 3.5-ton capacity. Please note that factory round fog lights are not compatible with this bumper. For the smoothest installation, it is recommended to run a tap through the threaded holes in the provided hardware and bracketry prior to final assembly.

• 1/4-inch thick aluminum alloy shell for lightweight strength
• Integrated 1/4-inch aluminum skid plate for underbody protection
• Internal steel winch mount (compatible with Warn Evo 10s, 12s, and others up to 12,000 lbs)
• Two 3.5-ton capacity reinforced recovery points
• Bolt-on grill guard with light mounting tabs
• Corrosion-resistant powder-coated finish
• Manufacturer Part Number: 2D.2702.3-NL

Fits 2024-2026 Ineos Grenadier and 2025-2026 Ineos Grenadier Quartermaster (Base, Fieldmaster, and Trialmaster).

Protect the vulnerable exhaust components of your Grenadier with Rival premium aluminum armor. This exhaust skid plate is engineered from 1/4-inch (6mm) deep-stamped aluminum alloy, providing heavy-duty impact protection for technical off-roading and overlanding without the weight penalty of traditional steel plates. The deep-stamping process increases the structural rigidity of the plate, ensuring it maintains its shape even when subjected to direct contact with rocks or stumps.

Installation is straightforward and requires no drilling or cutting to your vehicle's chassis, as the plate utilizes existing factory mounting points. Because aluminum is naturally corrosion-resistant, this skid plate will not rust or degrade even if the surface coating is scratched or gouged during trail use.

• Material: 1/4-inch (6mm) deep-stamped aluminum alloy
• Construction: High-strength, lightweight stamped design for maximum rigidity
• Installation: Direct bolt-on; no drilling or cutting required
• Finish: Natural corrosion resistance for long-term durability
• Manufacturer Part Number: 2333.4507.1.6

Fits 2018-2026 Jeep Wrangler JL and 2020-2026 Jeep Gladiator models.

The Rival Front Full-Width Aluminum Bumper provides comprehensive front-end protection without the excessive weight penalty of traditional steel units. Engineered for the rigors of technical trails and daily driving, this bumper features a high-strength aluminum construction that maintains vehicle balance while offering superior corrosion resistance compared to steel alternatives. The full-width profile ensures maximum coverage, shielding the grille and fender areas from brush, rocks, and debris.

• High-strength aluminum construction reduces front-end weight while maintaining durability
• Full-width design for complete protection of the front fascia and critical components
• Precision engineered to follow the factory body lines of the JL and JT platforms
• Corrosion-resistant finish stands up to harsh environmental conditions
• Bolts directly to factory mounting points for a secure installation

Fits 2025-2026 Subaru Forester AWD models (excluding Hybrid).

The Rival Aluminum Engine Skid Plate provides essential underbody protection for your Forester, shielding the engine oil pan and sensitive lower components from road debris, rocks, and off-road obstacles. Constructed from high-strength aluminum, this plate offers a significant durability upgrade over factory plastic splash guards while remaining lightweight to maintain vehicle handling and fuel efficiency.

• Precision-engineered for the 2025-2026 Subaru Forester AWD chassis
• High-strength aluminum construction for superior impact resistance
• Corrosion-resistant material ensures long-term protection in harsh environments
• Designed to bolt directly to existing vehicle mounting points for a secure fit
• Shields the engine sump and lower mechanical components from mechanical damage

Fits 2025-2026 Toyota 4Runner.

Protect your fuel system from trail damage with the Rival Aluminum Gas Tank Skid Plate. The factory fuel tank on the 4Runner is a vulnerable target for rocks, stumps, and debris during off-road traversal. This skid plate provides a durable barrier, preventing punctures and costly repairs while maintaining a lightweight profile to minimize impact on your vehicle's payload and suspension performance.

• Precision-engineered from high-strength aluminum for optimal underbody protection without the weight of steel
• Designed to bolt directly to factory mounting points for a secure, straightforward installation
• Corrosion-resistant finish stands up to mud, salt, and harsh trail environments
• Low-profile geometry preserves maximum ground clearance for technical terrain

Fits 2018-2026 Jeep Wrangler JL models (3.6L / 2.0L).

Protect your vehicle's most vulnerable underbody components with the RIVAL Aluminum Engine Skid Plate. Engineered to shield the engine oil pan and sensitive lower-engine components from rocks, stumps, and trail debris, this plate offers essential protection for off-road enthusiasts. Constructed from high-strength aluminum, it provides a superior strength-to-weight ratio compared to traditional steel plates, ensuring your Jeep remains protected without significant weight penalties.

• Precision-engineered for the Jeep Wrangler JL chassis (2018-2026)
• Constructed from lightweight, corrosion-resistant aluminum
• Designed to bolt directly to factory mounting points for straightforward installation
• Compatible with 3.6L (2018-2020) and 2.0L (2018-2026) engine configurations
• Manufacturer Part Number: 2333.2744.1.6

Fits 2021-2025 Ford F-150 King Ranch, Lariat, Limited, Platinum, XL, and XLT models.

Protect your drivetrain and chassis from costly off-road damage with the Rival Full Set of Aluminum Skid Plates. Specifically engineered for the Ford F-150 Powerboost, these plates provide comprehensive underbody coverage to shield vital components from rocks, stumps, and debris. By using high-strength aluminum, Rival delivers robust impact resistance without the excessive weight of traditional steel plating.

• Full set provides total underbody coverage for critical mechanical components
• Manufactured from high-quality aluminum for an optimal strength-to-weight ratio
• Corrosion-resistant finish ensures long-term durability in harsh environments
• Designed to mount to factory points for a precise fit
• Manufacturer Part Number: 2333.1855.2.6-KIT-PB

Fits 2024-2026 Ford Ranger Raptor.

Reinforce your vehicle's underbody with the Rival Aluminum Gas Tank Skid Plate. Designed to shield one of the most vulnerable components of your fuel system, this armor provides critical protection against impact and puncture from rocks, stumps, and trail debris. The high-strength aluminum construction offers a significant upgrade over factory protection, providing rugged durability while maintaining a lightweight profile to preserve performance and suspension balance.

• Precision-engineered for the 2024-2026 Ford Ranger Raptor
• High-strength aluminum construction for optimal impact resistance
• Shields the gas tank from off-road hazards and debris
• Corrosion-resistant finish for long-term trail use
• Manufacturer Part Number: 2333.1889.2.6

Enhance your vehicle's visibility and lighting versatility with the Rival Premium 3-Function LED Lights. Designed for high-performance auxiliary use, these LED units combine three distinct lighting modes within a single durable housing, providing a comprehensive solution for both on-road presence and off-road illumination.

These premium light units are engineered to withstand the rigors of trail use while maintaining consistent light output. The 3-function design allows for tailored lighting configurations to suit various driving conditions and environment needs. Sold as a pair, this kit is an essential upgrade for drivers requiring reliable, multi-purpose LED lighting.

• Integrated 3-function LED technology for multi-mode lighting capability
• High-output diodes for superior clarity and reach
• Set includes two (2) LED light units
• Durable construction suited for harsh environments
• Manufacturer Part Number: 2D.0081.1

Fits all 2024-2025 Toyota Tacoma models, including SR, SR5, TRD PreRunner, TRD Sport, TRD Off-Road, Limited, TRD Pro, and Trailhunter.

Shield your 4th Gen Tacoma's vulnerable suspension components with Rival aluminum lower control arm skid plates. Engineered from deep-stamped 1/4-inch (6mm) aluminum, these plates provide high-strength underbody protection against rocks, stumps, and trail debris while maintaining a significantly lower weight than traditional steel plating. The deep-stamping process increases the structural rigidity of the aluminum without adding bulk, ensuring your control arms remain protected during technical off-road maneuvers.

These skid plates feature a corrosion-resistant Matte Metallic Silver finish that stands up to the elements and resists rusting even if the surface is scratched. Designed for a straightforward installation, they bolt directly to factory mounting points with no drilling or cutting required for a secure fit.

• Manufactured from 1/4-inch (6mm) deep-stamped aluminum
• Corrosion-resistant Matte Metallic Silver finish
• Full bolt-on installation with no drilling or cutting required
• High strength-to-weight ratio for off-road durability
• Protects vital lower control arm components
• Manufacturer Part Number: 2333.9573.1.6

Special Note: For the smoothest assembly, we recommend running a tap through the included hardware and bracketry prior to installation. When performing oil changes, use a funnel to ensure a clean process and prevent fluid from pooling on the skid surface.

Fits 2024-2026 Toyota Tacoma, 4Runner, and Land Cruiser models.

Defend your vehicle's most vulnerable underbody components with the Rival Aluminum Engine Skid Plate. This heavy-duty plate is engineered to provide a robust shield for the engine sump and oil pan, preventing costly damage from rocks, stumps, and trail debris. By utilizing high-strength aluminum instead of traditional steel, this skid plate offers maximum protection without a significant weight penalty, preserving your suspension geometry and fuel efficiency.

• Fabricated from high-strength, corrosion-resistant aluminum
• Precision-engineered for a direct bolt-on fit to factory mounting points
• Low-profile design maintains maximum ground clearance
• Includes all necessary hardware for a straightforward installation
• Manufacturer Part Number: 2333.9571.3.6

Fits 2024-2026 Toyota Tacoma i-Force Max Hybrid models.

Protect your Tacoma’s critical underbody components with the Rival Aluminum Transmission and Catalytic Converter Skid Plate. This heavy-duty shield is engineered to safeguard the transmission housing and high-value catalytic converters from mechanical damage during off-road excursions and to act as a deterrent against theft. By utilizing lightweight aluminum construction, this skid plate provides a high-strength barrier without the significant weight penalty of traditional steel plates.

• Designed specifically for the i-Force Max Hybrid powertrain for precise fitment and clearance
• Protects both the transmission assembly and catalytic converters from rocks, debris, and theft
• Corrosion-resistant aluminum construction for long-lasting durability
• Bolt-on installation utilizes factory mounting points where applicable
• Manufacturer Part Number: 2333.9569.3.6

Fits 2022-2025 Subaru Crosstrek Wilderness and Forester Wilderness models.

Protect your vehicle's vital underbody components with the RIVAL premium engine skid plate. Engineered from 1/4-inch (6mm) deep-stamped aluminum alloy, this plate provides high-strength protection for the engine and oil pan with minimal weight gain compared to traditional steel plates. Designed specifically for off-road and overlanding use, it shields the drivetrain from impacts against rocks, logs, and rough terrain.

• Constructed from 1/4-inch deep-stamped aluminum alloy for maximum durability and weight savings.
• Naturally corrosion-resistant material prevents rust even if the surface is scratched or gouged.
• Direct bolt-on installation utilizes factory mounting points; no drilling or cutting of the vehicle is required.
• Precision-engineered fitment ensures vital components are shielded without compromising ground clearance.
• Manufacturer Part Number: 2333.5446.1.6

Fits select 2018-2025 Subaru Crosstrek, Forester, and Outback models.

Shield your vehicle's rear differential with the Rival Aluminum Differential Skid Plate. Engineered for the rigors of off-roading and overlanding, this plate provides critical underbody protection against rocks, logs, and trail debris. By utilizing deep-stamped 1/4-inch (6mm) aluminum alloy, Rival delivers maximum structural rigidity and impact resistance while keeping additional weight to a minimum compared to traditional steel plates.

Designed for a precise fit, this skid plate bolts directly to factory mounting points without the need for drilling or cutting. The natural corrosion-resistant properties of the aluminum alloy ensure that the plate remains structurally sound and rust-free, even after sustaining deep gouges or scratches from rough terrain. This is an essential upgrade for any Subaru owner looking to prevent costly drivetrain damage during backcountry exploration.

• Manufactured from 1/4-inch (6mm) deep-stamped aluminum alloy
• Protects the rear differential from impact and debris
• Simple bolt-on installation using existing mounting points
• Lightweight design with high strength-to-weight ratio
• Corrosion-resistant material ideal for harsh environments
• Manufacturer Part Number: 2333.5434.2.6

Fits 2024-2026 Ineos Grenadier and Grenadier Quartermaster models (Base, Fieldmaster, and Trialmaster).

Protect your vehicle's rear differential housing from impact damage with this Rival premium skid plate. Engineered specifically for the Ineos platform, this plate is constructed from deep-stamped 1/4-inch (6mm) aluminum alloy. This manufacturing process provides superior structural rigidity compared to flat-cut plates while keeping the weight significantly lower than traditional steel alternatives.

The natural corrosion-resistant properties of the aluminum alloy ensure that the plate will not rust, even if the surface is deeply gouged by rocks or trail debris. This unit is designed to bolt directly to factory mounting points, requiring no drilling or cutting for a clean, professional installation. It is an essential upgrade for technical rock crawling and overlanding where the rear axle is vulnerable to high-centering.

• Constructed from 1/4-inch (6mm) deep-stamped aluminum alloy
• Shields vital rear differential components from rocks, stumps, and debris
• Lightweight design provides maximum protection without excessive weight
• Direct bolt-on installation requires no drilling or cutting
• Natural corrosion resistance for long-term durability
• Manufacturer Part Number: 2333.4505.1.6

Fits 2024-2026 Ineos Grenadier and Grenadier Quartermaster (Base, Fieldmaster, and Trialmaster).

Protect your vehicle's front drivetrain with the Rival premium differential skid plate. Engineered from 1/4-inch (6mm) deep-stamped aluminum alloy, this plate provides superior structural rigidity and impact resistance for the front differential housing without the significant weight penalty of traditional steel plates. The deep-stamping process creates a reinforced shape that handles heavy trail impacts while maintaining a low profile.

Designed for direct bolt-on installation, this skid plate requires no drilling or cutting, utilizing factory mounting points for a secure fit. The natural corrosion-resistant properties of aluminum ensure the plate remains structurally sound and rust-free even if the surface coating is scratched or gouged during heavy off-road use.

• Material: 1/4-inch (6mm) stamped aluminum alloy
• Installation: Bolt-on design; no drilling or cutting required
• Finish: Corrosion-resistant aluminum
• Protection: Shields front differential from rocks, stumps, and trail debris
• Manufacturer Part Number: 2333.4504.1.6

Fits 2024-2026 INEOS Grenadier and Grenadier Quartermaster (Base, Fieldmaster, and Trialmaster models).

Protect your vehicle's vulnerable suspension components with RIVAL lower control arm skid plates. Engineered specifically for the INEOS Grenadier platform, these plates provide essential armor against rocks, logs, and debris during technical off-road driving. Constructed from deep-stamped 1/4-inch (6mm) aluminum alloy, they offer a superior strength-to-weight ratio, ensuring vital components are shielded without adding excessive unsprung weight.

Installation is entirely bolt-on, utilizing factory mounting points to eliminate the need for drilling or cutting. The natural corrosion-resistant properties of the aluminum alloy ensure that even if the surface is gouged or scratched on the trail, the plates remain structural and rust-free. These plates are an essential upgrade for overlanders and rock crawlers looking to maintain the integrity of their factory control arms.

• Deep-stamped 1/4-inch (6mm) aluminum alloy construction
• Includes both front and rear lower control arm protection
• Direct bolt-on installation using factory mounting points
• Corrosion-resistant material for long-term durability
• Lightweight design to preserve suspension response
• Manufacturer Part Number: 2333.4503.1.6

Fits 2024-2025 INEOS Grenadier and 2025 INEOS Grenadier Quartermaster (Base, Fieldmaster, Trialmaster).

Shield your vehicle's drivetrain from trail damage with the Rival Aluminum Transfer Case Skid Plate. Engineered for the rigors of off-roading and overlanding, this plate is constructed from 1/4-inch (6mm) deep-stamped aluminum alloy, providing a high-strength barrier against rock strikes and debris without the heavy weight of steel plating. The deep-stamping process increases structural rigidity, while the natural properties of aluminum offer superior corrosion resistance even if the surface is gouged.

• Constructed from 1/4-inch (6mm) deep-stamped aluminum alloy for maximum strength and minimal weight.
• Precision-engineered to protect the transfer case from rocks, logs, and rough terrain.
• Direct bolt-on installation with no drilling or cutting required.
• Corrosion-resistant material maintains integrity in harsh environments.
• Manufacturer Part Number: 2333.4502.2.6

Fits 2018-2026 Jeep Wrangler JL and 2020-2026 Jeep Gladiator.

The RIVAL Aluminum Sway Bar Skid Plate provides essential underbody protection for the vulnerable sway bar disconnect motor and surrounding steering components. Designed specifically for the Wrangler JL and Gladiator JT chassis, this armor ensures that trail obstacles like rocks and stumps do not damage critical electronic or mechanical systems. The aluminum construction offers a significant strength-to-weight advantage, providing rugged durability and corrosion resistance without the heavy weight penalty of traditional steel plates.

• Precision-engineered for Jeep Wrangler JL (2018-2026) and Gladiator (2020-2026)
• Constructed from high-strength, lightweight aluminum
• Protects electronic sway bar disconnect motors from impact and debris
• Designed for a direct bolt-on fit using factory mounting points
• Manufacturer Part Number: 2333.2740.1.6

Fits 2024-2026 Ford Ranger and Ranger Raptor models.

Shield your vehicle's critical driveline and exhaust components with the Rival Aluminum Transmission and Catalytic Converter Skid Plate. Designed specifically for the 2024-2026 Ford Ranger and Ranger Raptor, this heavy-duty underbody armor provides a robust barrier against trail obstacles, jagged rocks, and debris that can cause catastrophic damage to the transmission housing and the vulnerable catalytic converter.

• Constructed from high-strength aluminum for an optimal strength-to-weight ratio
• Comprehensive coverage protects both the transmission and the catalytic converter
• Precision-engineered to utilize factory mounting points for a secure, bolt-on installation
• Corrosion-resistant finish ensures long-term durability in extreme off-road environments
• Designed with airflow vents to maintain proper cooling for drivetrain components
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: 2333.1886.4.6

Fits 2015-2026 Ford F-150 models equipped with Ecoboost or Powerboost engines.

Shield your vehicle's drivetrain from costly trail damage with the RIVAL Aluminum Transfer Case Skid Plate. This essential piece of armor is engineered to provide a high-strength barrier for the vulnerable transfer case housing, protecting it from direct impacts against rocks, stumps, and debris during off-road excursions.

• Manufactured from high-grade aluminum for a superior strength-to-weight ratio.
• Corrosion-resistant finish ensures long-term durability in harsh environments.
• Designed to bolt directly to factory mounting points for a clean, secure installation.
• Low-profile design minimizes snagging while maintaining maximum ground clearance.
• Includes all necessary hardware for a complete setup.
• Manufacturer Part Number: 2333.1858.3.6

Fits 2024-2025 Toyota Tacoma Limited, SR, SR5, Trailhunter, TRD Off-Road, TRD PreRunner, TRD Pro, and TRD Sport.

This heavy-duty front crossmember is an essential mounting component for 2024-2025 Toyota Tacoma owners looking to enhance underbody protection. While certain off-road trims come with factory-welded mounting points, many trims require this additional crossmember to provide a secure anchor for aftermarket armor. It is specifically required for the installation of the RIVAL Aluminum Engine Skid Plate (2333.9571.2.6) on SR, SR5, Limited, and TRD Sport models.

Beyond its use with RIVAL systems, this component can also be utilized to facilitate the installation of a TRD-style skid plate on trims that are missing the factory front crossmember. For the smoothest installation experience, it is recommended to run a tap through the included hardware and bracketry to clear any coating or debris before final assembly.

• Function: Provides necessary mounting points for engine skid plates on trims without factory-welded crossmembers
• Requirement: Mandatory for RIVAL Skid Plate 2333.9571.2.6 on select trims
• Versatility: Compatible with TRD skid plate retrofits on SR, SR5, and Limited models
• Construction: Heavy-duty steel designed for off-road durability
• Manufacturer Part Number: 2333.9571.2.6.RK

Fits 2024-2026 Lexus GX550 and 2025-2026 Toyota 4Runner models.

Protect your vehicle’s critical underbody components with the Rival 1/4-inch Aluminum Transmission and Catalytic Converter Skid Plate (MPN: 2333.9567.4.6). Engineered for off-roaders and overlanders, this plate provides essential shielding for the transmission and exhaust system against rocks, logs, and debris. Deep-stamped construction offers superior structural rigidity while maintaining a significant weight advantage over traditional steel plates. The natural corrosion resistance of aluminum combined with a matte metallic silver finish ensures long-term durability even in harsh environments.

• Manufactured from 1/4-inch (6mm) deep-stamped aluminum for maximum strength and impact resistance.
• Bolt-on installation utilizes factory mounting points with no drilling or cutting required.
• Matte metallic silver finish provides an extra layer of protection against the elements.
• Shields catalytic converters from both trail impacts and potential theft.
• Includes all necessary mounting hardware and vehicle-specific brackets.
• Manufacturer Part Number: 2333.9567.4.6

Note: It is recommended to use a funnel during fluid services to prevent spills on the plate. For the best installation experience, verify thread clearance on all included hardware and brackets prior to final assembly.

Fits select 2021-2025 Toyota Tundra and 2022-2025 Toyota Sequoia models.

Protect your vehicle's vulnerable underbody with the RIVAL premium engine skid plate. Engineered from 1/4-inch (6mm) deep-stamped aluminum, this plate provides superior strength for off-road environments without the weight penalty of traditional steel armor. The deep-stamping process increases the structural rigidity of the plate, while the natural corrosion-resistant properties of the aluminum ensure long-term durability even if the matte metallic silver finish is gouged by rocks or debris.

This skid plate is designed as a direct bolt-on solution, requiring no drilling or cutting of your factory chassis. For the smoothest installation, we recommend running a tap through the included hardware and bracketry prior to assembly. To simplify routine maintenance, use a funnel during oil changes to prevent fluid collection on the plate surface.

• Material: 1/4-inch (6mm) Deep-Stamped Aluminum
• Finish: Corrosion-resistant Matte Metallic Silver
• Installation: Direct bolt-on to factory mounting points
• Protection: Shields engine oil pan and vital front-end components
• Manufacturer Part Number: 2333.9566.2.6

Fits select 2010-2024 Toyota 4Runner and 2010-2023 Lexus GX460 models.

Protect your fuel system from trail damage with the RIVAL Aluminum Gas Tank Skid Plate. Engineered for off-road durability, this plate is manufactured from 1/4-inch (6mm) deep-stamped aluminum alloy, offering superior impact protection while remaining significantly lighter than traditional steel alternatives. The deep-stamped design provides structural rigidity to deflect rocks and debris during technical rock crawling or high-clearance overlanding.

Installation is straightforward and requires no drilling or cutting, as the plate is designed to bolt directly to factory mounting points. Because it is constructed from aluminum, it features inherent corrosion resistance that prevents rust even if the surface is scratched or gouged by trail obstacles.

• Manufactured from 1/4-inch (6mm) deep-stamped aluminum alloy
• Lightweight construction reduces overall vehicle load compared to steel
• Natural corrosion resistance for longevity in wet or salty environments
• Precision-engineered for a no-drill, direct bolt-on installation
• Protects the vulnerable plastic gas tank from sharp rocks and logs
• Manufacturer Part Number: 2333.9544.1.6

Fits 2022-2025 Ford Bronco Sport and 2025 Ford Maverick Tremor.

Shield your vehicle's vital underbody components from trail hazards with the RIVAL premium engine skid plate. Engineered from 1/4-inch (6mm) deep-stamped aluminum, this plate offers high-strength impact resistance without the excessive weight of traditional steel armor. The deep-stamping process provides additional structural rigidity, while the matte metallic silver finish and natural corrosion resistance of aluminum ensure long-lasting durability, even if the surface is scratched or gouged during off-road use.

• Material: 1/4-inch (6mm) Deep-Stamped Aluminum
• Finish: Matte Metallic Silver
• Installation: Bolt-on design; no drilling or cutting required
• Shields engine and critical components from rocks, logs, and debris
• Corrosion-resistant properties for longevity in harsh environments
• Manufacturer Part Number: 2333.1897.1.6

Note: This skid plate does not fit Ford Bronco Sport models equipped with a metal oil pan. For cleaner maintenance, use a funnel during oil changes to prevent spills on the plate. It is recommended to use a tap on all included hardware and bracketry during installation to ensure smooth final assembly.

Fits 2022-2025 Ford Maverick Lariat, Lobo, XL, and XLT.

Shield your vehicle's vital underbody components with this RIVAL premium engine skid plate. Engineered from deep-stamped 1/4-inch (6mm) aluminum alloy, this plate provides maximum impact resistance for off-road use without the excessive weight of traditional steel plating. The deep-stamped construction significantly increases structural rigidity, allowing the plate to deflect rocks and debris encountered during overlanding or trail use.

Installation is a direct bolt-on process that utilizes factory mounting points, requiring no drilling or cutting of your vehicle's chassis. The natural corrosion-resistant properties of the aluminum alloy ensure long-term durability and protection against rust, even if the surface is gouged or scratched by trail obstacles.

• Material: 1/4-inch (6mm) deep-stamped aluminum alloy
• Installation: Bolt-on; no drilling or cutting required
• Lightweight design for minimal impact on fuel economy and suspension
• High corrosion resistance for all-weather durability
• Manufacturer Part Number: 2333.1891.2.6

Fits 2021-2025 Ford F-150 PowerBoost hybrid models (XL, XLT, Lariat, King Ranch, Platinum, and Limited).

Protect your hybrid drivetrain's most vulnerable components with the Rival Transmission and Catalytic Converter Skid Plate. Engineered specifically for the PowerBoost platform, this heavy-duty plate is deep-stamped from 1/4-inch (6mm) aluminum to provide superior structural rigidity and impact resistance with minimal weight. It shields the transmission and catalytic converter assemblies from off-road hazards like rocks and logs while acting as a deterrent against catalytic converter theft.

The matte metallic silver finish offers a clean look, while the natural properties of aluminum ensure the plate remains corrosion-resistant even if the surface is scratched during trail use. This is a direct bolt-on component that utilizes factory mounting points for a secure installation without the need for drilling or cutting. To ensure the smoothest assembly, it is recommended to run a tap through the included hardware and bracketry before installation.

• Material: 1/4-inch (6mm) deep-stamped aluminum
• Finish: Matte Metallic Silver
• Protection: Targeted coverage for transmission and catalytic converters
• Installation: Bolt-on design; no drilling or cutting required
• Compatibility Note: Does not fit vehicles with lift kits utilizing crossmember drop brackets
• Manufacturer Part Number: 2333.1811.1.6