This Part Fits:

Fits 2001-2003 BMW 525i and 530i (Base).

The Koni Special Active 8245 Series rear shock absorber utilizes patented Frequency Selective Damping (FSD) technology to bridge the gap between ride comfort and handling performance. This twin-tube, low-pressure gas shock is engineered to react to the frequency of road inputs, stiffening for controlled cornering and softening for rough pavement—all without the need for electronic sensors or complex cables.

As a direct replacement for your worn factory dampers, these red-finish shocks restore chassis stability and improve tire-to-road contact. This unit is specifically tuned for the rear suspension of the E39 chassis to provide a refined driving experience that adapts to changing road conditions in real-time.

• Manufacturer Part Number: 8245 1054
• Series: Special Active (Red)
• Design: Twin-tube low-pressure gas
• Technology: Frequency Selective Damping (FSD)
• Mounting Location: Rear
• Sold individually

Fits 2011-2019 Ford Fiesta S, SE, SEL, SES, ST, and Titanium.

The Koni STR.T (Orange) rear shock absorber provides an immediate handling upgrade for the Ford Fiesta without the complexity of manual adjustments. Engineered as a performance-oriented alternative to original equipment, this 8050 Series shock utilizes a twin-tube, low-pressure gas design to minimize body roll and enhance stability during spirited driving or daily commuting. Whether paired with factory springs or aftermarket lowering kits, the STR.T is valved to deliver Koni’s signature road-holding capability and improved damping control.

• Manufacturer Part Number: 8050 1130
• Series: STR.T (Orange) 8050
• Design: Twin-tube low-pressure gas charged
• Adjustment: Fixed/Non-adjustable
• Position: Rear
• Build: High-performance replacement for OE dampers

Fits 2016-2024 Chevrolet Camaro (6th Gen) models without factory Magnetic Ride Control (OE MagRide).

The Koni GTS Coilover kit is engineered to transform the handling characteristics of your 6th Gen Camaro. By combining Koni’s damping technology with an adjustable ride height platform, these coilovers allow you to lower your vehicle's center of gravity while maintaining a balance between street comfort and improved cornering performance.

Whether you are looking to eliminate wheel gap or improve transient response, the GTS series provides the precision valving necessary for a more connected driving experience. Each kit is designed for a direct-fit installation on non-MagRide equipped vehicles, utilizing factory mounting points for a straightforward upgrade.

• Adjustable ride height for custom stance and improved aerodynamics
• Sport-tuned damping for reduced body roll and better stability
• Direct-fit application for 2016-2024 Chevrolet Camaro
• Engineered for use on vehicles NOT equipped with OE Magnetic Ride Control

Fits 2006-2011 Honda Civic (DX, EX, EX-L, GX, LX, LX-S, and Si).

The Koni STR.T (Street) 8750 Series strut is engineered to provide an accessible performance upgrade for your vehicle's suspension system. This non-adjustable damper features a twin-tube, low-pressure gas-charged design that improves body control and handling stability compared to standard factory units. Whether you are maintaining a stock ride height or pairing with performance lowering springs, the STR.T series delivers enhanced road holding without the complexity of manual adjustment.

• Position: Right Front
• Product Line: STR.T Orange (8750 Series)
• Internal Design: Twin-tube low-pressure gas charged
• Adjustment: Non-adjustable
• Finish: Koni Orange paint
• Installation: Direct bolt-on replacement for factory strut

Fits 2011-2014 Ford Mustang Base, GT, and Shelby GT500.

The Koni STR.T (Orange) front strut is designed to provide an entry-level performance upgrade for your Mustang's suspension. Part of the 8750 Series, this non-adjustable strut features a twin-tube, low-pressure gas design that delivers improved handling and body control without the complexity of adjustable damping. It is an ideal choice for drivers looking to restore or improve their vehicle's handling characteristics, whether using factory springs or performance lowering springs.

• Series: STR.T (Orange) 8750
• Design: Twin-tube low-pressure gas charged
• Adjustment: Non-adjustable fixed damping
• Placement: Front
• Manufacturer Part Number: 8750 1108

Fits 2002-2008 Mini Cooper Base and S models.

The Koni Sport 8741 Series, commonly known as the Koni Yellow, is designed for drivers who demand exceptional handling and road holding. This left front strut features an externally adjustable rebound setting, allowing you to fine-tune the suspension damping to suit your driving style or road conditions without removing the unit from the vehicle. Built with a twin-tube low-pressure gas charged design, it provides consistent performance and improved steering response over factory components.

• Manufacturer Part Number: 8741 1440LSPOR
• Position: Left Front
• Design: Twin-tube low-pressure gas charged
• Adjustment: Externally rebound adjustable
• Finish: Koni Sport Yellow paint

Fits 1998-2005 Porsche 911 (996) models including Carrera, Carrera 4, Carrera 4S, Targa, and Turbo.

The Koni Sport (Yellow) 8241 Series rear shock absorber is engineered for drivers seeking improved handling and a sporting driving experience without sacrificing ride quality. These shocks focus on exceptional road-holding and manageable damping characteristics. The twin-tube low pressure gas design provides consistent performance, while the external rebound adjustment allows you to fine-tune the suspension to your driving style or specific road conditions without removing the shock from the vehicle.

• Manufacturer Part Number: 8241 1274SPORT
• Series: Koni Sport (Yellow) 8241
• Design: Twin-tube low pressure gas charged
• Adjustment: Externally rebound adjustable
• Position: Rear
• Improved body roll control and steering response

Fits 1986-1993 Toyota Supra Base, Turbo, and Twin Turbo models (MA70).

The KONI Sport 8040 Series rear shock absorber is engineered for drivers seeking improved body control and handling precision without sacrificing daily drivability. Known as the "Koni Yellow," these units feature a twin-tube, low-pressure gas design that provides consistent damping performance. A standout feature of the Sport line is the internal rebound adjustability, allowing you to fine-tune the suspension to match specific spring rates or personal driving preferences.

Designed as a direct replacement for the factory rear dampener, this shock is compatible with both OE and lowering springs. Please note that installing this component disarms the factory electronic suspension system (TEMS) if equipped.

• Internally rebound adjustable to customize handling characteristics
• Twin-tube low-pressure gas charged design for durability and comfort
• Signature Koni Yellow painted finish for superior corrosion resistance
• Replaces worn factory units to restore chassis stability
• Manufacturer Part Number: 8040 1064SPORT

Fits select 2012-2019 Fiat 500 and Abarth 500 models.

The Koni Sport 8741 Series, often referred to as the Koni "Yellow," is the definitive choice for Fiat 500 owners looking to bridge the gap between street comfort and track-ready performance. This right-front strut features a twin-tube, low-pressure gas design engineered for exceptional road holding and reduced body roll. The standout feature is its external rebound adjustability, allowing you to fine-tune your suspension damping with a simple turn of a knob to match your driving style or road conditions.

• Manufacturer Part Number: 8741 1566RSPOR
• Series: Koni Sport (Yellow)
• Position: Right Front
• Construction: Twin-tube low-pressure gas charged
• Adjustability: Externally rebound adjustable
• Finish: Corrosion-resistant yellow powder coat

Authoritative Fitment:

• 2012-2019 Fiat 500 Abarth & Abarth Cabrio
• 2013-2016 Fiat 500 Turbo & 500 E
• 2012-2016 Fiat 500 Pop, Sport, & Lounge
• 2012-2016 Fiat 500 c Lounge & c Pop
• 2016 Fiat 500 Easy & c Easy
• 2012 Fiat 500 Gucci & c Gucci

Fits 2016-2023 Honda Civic EX, EX-L, EX-T, LX, LX-P, Sport, Sport Touring, and Touring.

The Koni Sport (Yellow) rear shock is engineered for drivers seeking improved handling and road-holding capabilities. Designed to reduce body roll and provide superior damping control, these shocks are a favorite for enthusiasts who demand performance on both the street and the track. This rear damper is built to withstand the rigors of spirited driving while maintaining a level of comfort suitable for daily use.

• Manufacturer Part Number: 8040 1436SPORT
• Series: Koni Sport (Yellow)
• Position: Rear
• Engineered to work with original equipment (OE) or performance lowering springs
• Direct-fit replacement for factory rear shocks

Koni Sport shocks are recognized by their signature yellow finish and represent the gold standard in adjustable damping technology, allowing you to fine-tune your suspension characteristics to match your driving style.

Upgrade your suspension with the Koni Special Active Front Shock, specifically engineered for 2011-2014 Ford Mustang Base, GT, and Boss 302 models. Utilizing Koni's patented Frequency Selective Damping (FSD) technology, these shocks provide an adaptive ride that responds to road conditions in real-time. This mechanical system offers firm control for aggressive cornering while maintaining a smooth, compliant ride over expansion joints and rough pavement.

As a premium replacement for worn factory dampers, the Special Active series improves overall grip and chassis stability without the complexity of electronic systems. This shock bolts directly into the factory location to restore and enhance the handling characteristics of your S197 Mustang.

• Fits 2011-2014 Ford Mustang (Base, Boss 302, GT)
• Koni Special Active Series featuring Frequency Selective Damping (FSD)
• Enhances both ride comfort and handling precision
• Mechanical adaptive damping requires no cables or sensors
• Front position placement
• Manufacturer Part Number: 8745 1402

Fits 2019-2024 Toyota RAV4 (XA50) models.

The Koni Special Active front right shock (8745 1419R) brings premium damping technology to the RAV4 chassis. Utilizing Koni's patented Frequency Selective Damping (FSD), this shock absorber identifies and reacts to road conditions in real-time. It provides firm damping for controlled cornering and reduced body roll on smooth pavement, while instantly softening to soak up harsh expansion joints and rough surfaces.

Unlike electronic adaptive suspensions, the Special Active system is entirely mechanical, offering a reliable, bolt-on upgrade that restores and improves OE ride quality. It is specifically engineered to interface with factory mounting points for a straightforward installation.

• Technology: Patented Frequency Selective Damping (FSD)
• Position: Front Right
• Build: High-durability twin-tube construction
• Benefits: Improved stability, steering response, and ride comfort
• Part Number: 8745 1419R

Fits 2019-2024 Toyota RAV4 (XA50) models.

The Koni Special Active series represents the next generation of premium shock absorbers, engineered to provide superior handling without compromising ride quality. Utilizing Koni's patented Frequency Selective Damping (FSD) technology, this front left shock mechanically adjusts its damping level in real-time. It remains firm for controlled cornering and spirited driving on smooth surfaces, while instantly softening to absorb harsh impacts and road vibrations for a more comfortable ride on rougher pavement.

• Features Frequency Selective Damping (FSD) technology for adaptive ride control
• Significant improvement in safety, stability, and grip over factory units
• Refines ride quality for both drivers and passengers on various road surfaces
• High-quality twin-tube construction finished in Koni Special Active Red
• Direct bolt-on replacement for the OE front left strut
• Manufacturer Part Number: 8745 1419L

Fits 2015+ Mazda MX-5 Miata (ND) models.

The Koni Special Active rear shock absorber utilizes patented Frequency Selective Damping (FSD) technology to bridge the gap between high-performance handling and ride comfort. This mechanical valving system automatically adjusts to road conditions, providing firm damping for controlled cornering on smooth asphalt while instantly softening to absorb harsh impacts and expansion joints. Unlike electronic suspension systems, Special Active dampers provide adaptive performance without the need for sensors, cables, or controllers.

• Patented FSD technology for adaptive damping performance
• Improves vehicle stability, steering response, and body roll
• Maintains high levels of ride comfort on rough surfaces
• Direct bolt-on replacement for the factory rear shock
• Durable twin-tube construction with a metallic gold finish
• Manufacturer Part Number: 8245 1442

Fits 2015-2024 Mazda Miata MX-5 (ND) models.

Refine your ND Miata’s handling and ride quality with the Koni Special Active Front Shock Absorber. This shock utilizes Koni’s patented Frequency Selective Damping (FSD) technology to provide a dual-mode driving experience without the need for electronic sensors or cables. It delivers firm, sporty control for cornering and high-speed stability while automatically softening to absorb harsh expansion joints and rough pavement.

The Special Active series is designed as a direct replacement for the front factory dampers, improving mechanical grip and driver feedback without the harshness often associated with performance suspension. Whether you are daily driving or hitting the backroads, these shocks maintain chassis composure across all road surfaces.

• Frequency Selective Damping (FSD) technology for adaptive ride control
• Significant improvement in stability, safety, and grip
• Direct-fit replacement for OE front shock absorbers
• Twin-tube high-pressure gas design for consistent performance
• Finished in signature Koni Special Active Red
• Manufacturer Part Number: 8245 1441

Fits 2007-2009 Mazda 3 Mazdaspeed.

The Koni 1125 1039 STR.T Kit provides a complete suspension solution for the first-generation Mazdaspeed3. This performance-matched set combines Koni’s signature orange STR.T high-performance dampers with Eibach lowering springs to enhance handling, reduce body roll, and provide a more aggressive stance. By pairing specifically valved dampers with engineered spring rates, this kit eliminates the guesswork of mixing and matching individual components.

Designed as a direct bolt-on replacement for the factory suspension, the STR.T kit offers improved chassis control and feedback for spirited driving while maintaining a composed ride for daily use. The dampers feature fixed-rate performance valving that is optimized for the included Eibach springs, ensuring a balanced and predictable driving experience.

• Complete car set: Includes 4 Koni STR.T dampers and 4 Eibach lowering springs
• Koni STR.T dampers with signature orange finish
• Eibach lowering springs for a reduced center of gravity and improved aesthetics
• Specifically valved for the weight and suspension geometry of the Mazdaspeed3
• Direct OE replacement using factory mounting points
• Manufacturer Part Number: 1125 1039

Fits select 2016-2023 Honda Civic models, including EX, EX-L, EX-T, LX, LX-P, Sport, Sport Touring, and Touring trims with a 50.5mm clamp area.

The Koni Sport (Yellow) series is the industry standard for adjustable damping, designed for drivers looking for a significant improvement in handling and body control without sacrificing ride quality. This front passenger-side strut allows you to fine-tune the rebound damping to match your driving style or spring rates. Engineered to replace the factory unit, it features a 50.5mm clamp diameter for precise fitment in the original spindle.

• External rebound adjustment for easy on-car tuning
• Twin-tube high-pressure gas design for consistent performance
• Specifically valved for the 10th and 11th generation Honda Civic chassis
• Finished in signature Koni Yellow powder coat for corrosion resistance
• Manufacturer Part Number: 8741 1609RSPOR
• Sold individually; fits front right (passenger side) only

Fits 2016-2023 Honda Civic EX, EX-L, EX-T, LX, LX-P, Sport, Sport Touring, and Touring models.

Koni Sport (Yellow) struts are the industry leader for drivers seeking a significant upgrade in handling and body control without sacrificing ride quality. This front driver-side damper is specifically engineered for the 10th and 11th generation Honda Civic chassis equipped with the 50.5mm mounting clamp. Unlike standard replacement shocks, the Koni Sport series features an externally adjustable rebound system, allowing you to fine-tune your suspension damping to match your driving style, spring rates, or track conditions in seconds.

Built with a twin-tube gas pressure design, these struts provide superior damping consistency and longevity. Whether you are correcting the under-damped feel of the factory suspension or pairing them with lowering springs, these Koni Yellows deliver sharper turn-in and reduced body roll for a more connected driving experience.

• Manufacturer Part Number: 8741 1609LSPOR
• Position: Front Left (Driver Side)
• Series: Sport (Yellow)
• Damping Type: Twin-tube gas pressure
• Adjustment: Externally adjustable rebound
• Fitment Note: Specifically for 50.5mm diameter lower clamp area

Fits 2014-2023 Ram ProMaster 1500, 2500, 3500, and 2015-2022 ProMaster City (Base, SLT, Tradesman).

Improve the ride quality and chassis control of your cargo or passenger van with this Koni shock absorber. Engineered to handle the unique weight distribution and high center of gravity found in commercial vehicles, this shock provides superior dampening over factory units. Whether your ProMaster is empty or fully loaded, the precision-valved internals help reduce body roll and improve overall stability on both city streets and highways.

Built to withstand the rigors of heavy-duty use, this unit features a durable construction that maintains performance over long service intervals. It is designed as a direct replacement for the original equipment, utilizing factory mounting points for a straightforward installation process.

• Manufacturer Part Number: 8205 1006
• Extended Length (LMAX): 469mm
• Collapsed Length (LMIN): 307mm
• Fitment Type: Direct OE Replacement
• Compatibility: Fits all 1500, 2500, and 3500 ProMaster chassis and ProMaster City variants

Fits select 2015-2023 Mercedes-Benz and Freightliner Sprinter 2500, 3500, and 3500XD 4x4 models (906 chassis).

The Koni Heavy Track (Red) series is engineered specifically to meet the high-damping demands of 4x4 vehicles and heavy-duty vans. This front left shock absorber improves road holding, steering response, and overall stability, making it an essential upgrade for Sprinter owners who carry heavy loads or navigate varied terrain. Built to withstand punishing conditions, these shocks provide a more controlled ride by replacing worn factory units with high-performance damping technology.

• Product Line: Heavy Track (Red)
• Position: Front Left
• Engineered for 4x4 Sprinter applications
• Improves damping, comfort, and safety on and off-road
• Manufacturer Part Number: 87 2661

Fits select 2009-2016 Honda Fit and CR-Z models.

The Koni STR.T (Orange) series is engineered for drivers seeking improved handling and stability without the need for manual adjustment. This right front strut provides a direct-fit performance upgrade over factory equipment, utilizing a twin-tube design and low-pressure gas charging to reduce body roll and sharpen steering response. Whether you are replacing worn-out OE dampers or pairing them with lowering springs, the STR.T series delivers a firm, controlled ride designed specifically for your Honda's chassis.

• Position: Right Front
• Series: STR.T (Orange)
• Design: Non-adjustable twin-tube low-pressure gas charged
• Installation: Direct bolt-on replacement for factory strut
• Compatibility: Works with original equipment or performance lowering springs
• Manufacturer Part Number: 8750 1102R

Fits 2009-2016 Honda Fit and CR-Z models. This Koni STR.T (Street) orange front strut provides an entry-level performance upgrade for drivers looking to improve handling and control without the complexity of adjustability. Designed as a direct-fit replacement for the factory unit, it utilizes a twin-tube, low-pressure gas-charged design to deliver consistent damping and reduced body roll during spirited driving.

• Manufacturer Part Number: 8750 1102L
• Series: Koni STR.T (8750 Series)
• Position: Left Front
• Design: Twin-tube low-pressure gas charged
• Adjustment: Non-adjustable fixed rate
• Finish: Signature Koni Orange powder coat

Fits 2000-2005 Toyota Echo and 2004-2006 Scion xA and xB (Base models).

The Koni STR.T (Street) 8750 Series front strut is designed for drivers seeking improved handling and road holding without the complexity of adjustable damping. These orange-painted struts feature factory-set valving tailored to the specific chassis, offering a significant upgrade over original equipment performance and stability. Utilizing a twin-tube, low-pressure gas charged design, the STR.T provides consistent damping performance and reduced body roll during spirited driving.

• Series: Koni STR.T (Street) Orange
• Damping: Non-adjustable twin-tube
• Charge Type: Low-pressure gas
• Position: Front
• Manufacturer Part Number: 8750 1033
• Installs directly into factory mounting points

The Koni STR.T 8050 Series rear shock absorber is an entry-level performance damper designed to provide improved handling and control for select 1984-1999 BMW 3 Series models. This non-adjustable, twin-tube low-pressure gas-charged shock replaces worn factory units to restore dampening precision, reduce body roll, and enhance stability.

• Manufacturer Part Number: 8050 1138
• Series: Koni STR.T (Orange)
• Design: Twin-tube low pressure gas-charged construction
• Valving: Fixed performance valving for improved cornering and road feel
• Compatibility: Replaces factory rear shock absorbers on RWD and iX models

Vehicle Fitment: Fits 1995-1999 BMW 318ti; 1986-1988 BMW 325; 1984-1987 BMW 325e; 1986-1987 BMW 325es; 1987-1991 BMW 325i; 1987-1991 BMW 325is; and 1988-1991 BMW 325iX.

Fits 1990-1997 Mazda Miata (Base, LE, M Edition, SE, and STO).

The Koni STR.T (Orange) 8050 Series rear shock absorber is engineered to provide a performance-oriented upgrade for the NA-generation Mazda Miata. This non-adjustable, twin-tube low-pressure gas-charged unit is specifically valved to improve road holding and minimize body roll without the complexity of adjustable damping. It serves as an ideal solution for drivers seeking Koni quality and improved handling at an entry-level price point.

• Series: Koni STR.T (Orange) 8050 Series
• Design: Twin-tube low-pressure gas charged for consistent performance
• Fitment Location: Rear (includes specific spring perch location)
• Performance: Fixed-rate damping optimized for the Mazda Miata chassis
• Installation: Direct replacement for original equipment shock absorbers
• Manufacturer Part Number: 8050 1042

Fits 1990-1997 Mazda Miata (Base, LE, M Edition, SE, and STO models).

The Koni STR.T (Orange) front shock absorber offers a significant performance upgrade for the NA-generation Mazda Miata. Designed to provide improved handling and body control, the 8050 Series shock utilizes a twin-tube, low-pressure gas-charged design. These non-adjustable dampers come with factory-set valving specifically tuned to enhance road holding and stability without the need for manual adjustment, making them an ideal choice for refreshing a worn suspension or pairing with performance lowering springs.

• Fixed-rate damping optimized for street performance and control
• Twin-tube low-pressure gas technology reduces oil aeration
• Direct-fit replacement for factory front dampers
• Durable orange finish for corrosion resistance and identification
• Compatible with original equipment or aftermarket lowering springs
• Manufacturer Part Number: 8050 1041

Fits 1990-1996 Nissan 300ZX 2+2, Base, and Turbo models.

The Koni Sport 8041 Series front shock absorber is engineered for enthusiasts seeking precise handling and reduced body roll. Known as the "Koni Yellow," this twin-tube low-pressure gas shock is specifically valved for sporting applications. It features an external rebound adjustment, allowing you to fine-tune the damping characteristics to suit your driving style or spring rates without removing the unit from the vehicle.

This shock replaces the factory front damper and is designed to integrate with the 300ZX chassis. Note that installation of this performance shock disarms the factory electronic suspension system on equipped models.

• Manufacturer Part Number: 8041 1118SPORT
• Series: Koni Sport (Yellow) 8041
• Placement: Front
• Internal Design: Twin-tube low-pressure gas charged
• Adjustment: Externally rebound adjustable
• Finish: Signature Koni Yellow paint

Fits 1993-2002 Chevrolet Camaro and Pontiac Firebird models.

The Koni STR.T 8250 Series rear shock absorber is a performance-oriented upgrade designed to improve the handling and body control of your vehicle. This fixed-rate damper, recognizable by its signature orange finish, serves as an ideal replacement for worn factory shocks, providing improved road holding and steering response without the need for manual adjustments.

Engineered with Koni’s twin-tube low-pressure gas technology, the STR.T (Orange) shock minimizes oil aeration to maintain consistent damping performance during spirited driving. This unit is built to high tolerances and is compatible with both original equipment springs and many aftermarket lowering kits, making it a versatile choice for street performance enthusiasts.

• Direct-fit replacement for factory rear shock absorbers
• Twin-tube low-pressure gas charged design for consistent damping
• Non-adjustable fixed-rate damping tuned for performance street use
• Durable orange painted finish for corrosion protection
• Specifically engineered for 1993-2002 GM F-Body platforms
• Manufacturer Part Number: 8250 1006

Fits 1993-2002 Chevrolet Camaro and Pontiac Firebird (V6/V8) models. This shock absorber is designed to improve handling and body control for F-body enthusiasts looking for a performance upgrade over original equipment.

The Koni STR.T (Orange) 8250 Series front shock provides a fixed-rate damping solution that balances daily ride quality with spirited driving performance. Using a twin-tube, low-pressure gas-charged design, it offers more consistent damping than standard hydraulic units. These shocks are engineered to pair perfectly with factory springs or aftermarket lowering springs to eliminate excessive body roll and nose dive under braking.

• Manufacturer Part Number: 8250 1005
• Position: Front (Left or Right)
• Series: STR.T 8250 (Orange)
• Design: Twin-tube low-pressure gas charged
• Adjustability: Non-adjustable, fixed performance valving
• Finish: Durable orange powder coat
• Direct bolt-on replacement for factory dampers