The Vibrant T6 Turbo Compressor Outlet Flange to 4-inch HD Weld Ferrule provides a secure, leak-proof connection for high-boost induction systems. Designed specifically for T6-frame turbochargers, this component converts the compressor discharge to a modular 4-inch HD clamp interface, eliminating the reliance on traditional silicone couplers and worm-gear clamps that can fail under extreme pressure.

• Precision Fitment: Engineered to mate directly with T6 turbocharger compressor outlets.
• HD Series Compatibility: Features an integrated 4-inch HD weld ferrule designed for use with Vibrant Performance HD Clamps.
• Reliable Performance: Ideal for high-pressure forced induction applications where coupler blow-off or boost leaks are a concern.
• Fabrication Ready: Provides a professional, rigid transition for custom intercooler piping and charge air systems.

The Vibrant Performance LS DBC 102mm Throttle Body to 4-inch HD Adapter provides a rigid, leak-proof connection for high-boost LS engine applications. This precision-machined component allows for the direct transition from a 102mm Drive-By-Cable (DBC) throttle body to a 4-inch Vibrant HD Clamp system, eliminating the reliability issues associated with traditional silicone couplers under extreme pressure.

• Designed specifically for 102mm LS Drive-By-Cable (DBC) throttle bodies
• Adapts throttle body inlet to a 4-inch Vibrant HD Clamp assembly
• Maintains a secure, high-pressure seal in forced induction setups
• Engineered for precision fitment and maximum flow transition
• Ideal for race-tier plumbing where coupler failure is not an option

Ensure a leak-free seal on your forced induction system with this Turbosmart replacement O-ring, specifically engineered for the 2.50-inch compressor outlet turbo adapter. Maintaining a precise seal at the turbocharger outlet is critical; even a minor leak can lead to significant boost pressure loss, increased turbo lag, and reduced engine efficiency.

• Designed specifically for Turbosmart 2.50in compressor outlet adapters
• Constructed from high-temperature resistant material to handle extreme thermal cycles
• Direct replacement for worn, flattened, or brittle seals to prevent boost leaks
• Restores airtight integrity between the turbocharger and the charge piping

Ensure a reliable, leak-free seal in your forced induction system with this genuine Turbosmart replacement O-ring. Designed specifically for the 3.00-inch Turbosmart turbo compressor outlet adapter, this high-quality seal prevents performance-robbing boost leaks and maintains consistent pressure throughout the intake tract.

• Direct replacement for 3.00-inch Turbosmart turbo adapter compressor outlet seals
• Engineered for high-temperature resistance in demanding engine bay environments
• Precision-molded profile ensures a proper seat between the adapter and the compressor housing
• Essential hardware for routine maintenance or when re-installing turbo components

The TiAL Sport QRJ Blow Off Valve 1.34in (34mm) Tube Flange is a precision-engineered mounting solution designed specifically for the modular QRJ series valve. This adapter allows for a direct, secure connection to 34mm (1.34-inch) charge pipes or intercooler plumbing, ensuring the valve remains stable and properly sealed under high boost conditions.

• Designed specifically for TiAL Sport QRJ Series Blow Off Valves
• Outer Diameter: 1.34in (34mm)
• Configuration: Tube/Hose mount flange
• Precision-machined for a leak-free fit and optimal pressure retention
• Ideal for custom charge pipe fabrication and OE bypass valve replacement

The TiAL Sport QRJ adapter flange provides a precise solution for mounting a QRJ series Blow Off Valve onto an existing Q or QR V-band flange. This component is engineered for enthusiasts looking to update their forced induction setup without the need for cutting or re-welding existing charge pipes or intercooler plumbing.

• Designed specifically to adapt TiAL QRJ BOV bodies to standard Q and QR series V-band mounting points
• Precision-machined construction ensures a secure, leak-free seal under high boost pressures
• Enables quick valve swaps and simplifies system reconfigurations
• Eliminates the need for additional fabrication when upgrading to a QRJ valve

This TiAL Sport weld-on flange is an essential component for custom forced induction projects, providing a secure mounting point for your blow-off valve on aluminum charge pipes or intercooler piping. Precision-machined from high-grade aluminum, this flange ensures a stable, leak-free mating surface that perfectly matches the TiAL BOV mounting profile.

Engineered for durability and ease of installation, it is designed to be TIG-welded directly to aluminum intake tubing. This flange provides the structural integrity needed to withstand high boost pressures without the risk of flange distortion or leaks often found in lower-quality alternatives.

• Material: High-grade 6061-type aluminum
• Installation: Weld-on (TIG recommended)
• Application: Custom aluminum charge pipes and intercooler systems
• Compatibility: Fits TiAL Sport blow-off valve mounting bases

This TiAL Sport stainless steel outlet flange is the standard weld-on solution for the discharge side of the MV-R 44mm external wastegate. It provides a precise mating surface for custom dump tube fabrication, ensuring a leak-free seal where exhaust gases exit the gate. Constructed from heavy-duty stainless steel, it is designed to withstand the extreme thermal cycling common in high-performance turbocharged applications.

• Specifically designed for TiAL Sport MV-R 44mm external wastegates
• Stainless steel construction for maximum heat and corrosion resistance
• Weld-on design for custom exhaust and dump tube fabrication
• Precision-machined for a high-tolerance fit and reliable sealing

Fabricate a secure, leak-free connection for your custom downpipe with this Stainless Bros 4-inch turbine outlet flange. Engineered specifically for Borg Warner T4 turbine housings, this flange provides the precision mating surface required for high-heat, high-pressure exhaust environments. Machined from 304 stainless steel, it offers exceptional corrosion resistance and weldability for professional-grade forced induction setups.

• Material: 304 Stainless Steel (SS304)
• Outlet Size: 4.00 inches
• Compatible Turbo Series: Borg Warner EFR Series, S400 Series (S, SX, SX-E)
• Housing Type: T4 Turbine Housings
• Application: Turbine Discharge / Downpipe Fabrication

Fabricate your custom intake system with professional-grade precision using the Stainless Bros SS304 Slot Style MAF Flange. This weld-on component is engineered to provide a secure, leak-free mounting point for slot-style Mass Air Flow (MAF) sensors on custom stainless steel intake or intercooler piping. It is specifically designed for compatibility with HPX sensors and various other common slot-style sensors found in modern performance applications.

Constructed from high-quality 304 stainless steel, this flange offers exceptional corrosion resistance and superior weldability, ensuring it stands up to the heat and vibration of a high-performance engine bay. The precision-machined mating surface ensures the sensor sits at the correct depth and angle for accurate air mass readings, which is critical for consistent engine tuning and driveability.

• Material: 304 Stainless Steel (SS304)
• Sensor Fitment: Slot Style (Commonly used on Ford, GM, and Hitachi applications)
• Compatibility: Optimized for HPX and similar aftermarket/OEM slot sensors
• Application: Custom intake, turbocharger, or supercharger plumbing
• Feature: Precision-machined for a flat, reliable sealing surface

This Stainless Bros compressor outlet flange is engineered for fabricators building custom charge piping for mid to large-frame turbochargers. Precision-machined from 304 stainless steel, it provides a stable, high-strength welding surface that resists warping under heat and ensures a leak-free connection between the turbocharger and the intercooler system.

• Material: 304 Stainless Steel (SS304) for maximum durability and corrosion resistance.
• Compatibility: Designed for mid/large frame turbo compressor housings.
• Tubing Size: Direct fit for 3-inch (76mm) outer diameter tubing.
• Application: Ideal for high-boost forced induction setups requiring secure, flanged intercooler piping connections.

Fabricated for precision and durability, the Stainless Bros 3-5/8in turbine outlet flange provides a professional-grade solution for custom downpipe construction. This flange is specifically designed to interface with the 3.625-inch V-band outlet found on select Precision Turbo housings, ensuring a secure, leak-free connection under high exhaust temperatures and pressures.

• CNC-machined from high-grade 304 stainless steel for excellent weldability and corrosion resistance
• 3-5/8" (3.625") diameter matches Precision Turbo turbine outlet specifications
• Precision V-band profile ensures a tight seal with standard V-band clamps
• Designed for custom exhaust and downpipe fabrication
• Part type: Turbine Outlet Flange

Constructed from high-grade 304 stainless steel, this Vibrant Performance female V-band flange provides a secure, leak-free connection for custom exhaust, intake, or intercooler piping. This individual flange is designed specifically to slip over 2.25-inch O.D. tubing, allowing for the fabrication of modular systems that can be easily disassembled for maintenance or component swaps without the need for gaskets.

• Manufacturer Part Number: 1489F
• Material: 304 Stainless Steel
• Tubing Compatibility: 2.25" O.D.
• Connection Type: Female V-Band
• Construction: Precision-machined for optimal sealing and alignment

This flange is engineered to resist corrosion and maintain its structural integrity under the high thermal stress common in forced induction and high-performance exhaust applications. When paired with a matching male flange and V-band clamp, it creates a reliable, professional-grade union for any custom fabrication project.

The Ticon Industries Tig Aesthetics 3-inch Universal V-Band Heat Sink (903-75076-1001) is a specialized fabrication tool designed to ensure professional-grade TIG welding results. Precision-machined from Tellurium Copper, this heat sink offers exceptional thermal conductivity to pull heat away from the weld zone, effectively preventing the warping and distortion commonly associated with welding V-band flanges.

Equipped with an integrated back-purge port, this tool allows for a localized argon environment, ensuring clean, "sugar-free" interior weld beads for sanitary-grade results on exhaust or intake plumbing. Its universal design ensures compatibility with standard 3-inch V-band flanges used in high-performance automotive applications.

• Machined from high-grade Tellurium Copper for maximum heat dissipation and durability
• Prevents flange warping and maintains critical tolerances during high-heat welding
• Integrated gas purge port for consistent interior weld quality
• Sized for universal 3-inch V-band applications
• Manufacturer Part Number: 903-75076-1001

The Turbosmart TS-199-3029 Compressor Outlet Adapter is a precision-engineered solution for connecting your turbocharger's compressor housing to your intercooler plumbing. This adapter facilitates a secure transition from the compressor outlet to a 2.50-inch straight connection, designed for compatibility with 2.50-inch Vibrant-style couplers and piping systems.

• Manufacturer: Turbosmart
• Part Number: TS-199-3029
• Inlet Diameter: 2.50 inch
• Outlet Diameter: 2.50 inch
• Orientation: Straight
• Application: Turbocharger compressor housing outlet

Constructed to handle the high thermal and pressure demands of performance forced induction systems, this adapter ensures a consistent boost path. It is ideal for custom intake and intercooler configurations where a robust, leak-free seal at the compressor housing is critical for maintaining engine efficiency and power.

The Turbosmart TS-199-3041 adapter is engineered to provide a secure, leak-proof transition from your turbocharger compressor outlet to high-pressure plumbing. This precision-machined component adapts a standard 3.00-inch compressor outlet to a straight 3.00-inch Plazmaclamp interface, specifically designed for compatibility with Vibrant Plazmaclamp assemblies.

Built for high-boost environments where traditional silicone couplers and worm-gear clamps may fail, this adapter provides the rigid connection necessary for professional-grade forced induction systems. It is an essential part for fabricators and tuners building custom intercooler piping that requires a reliable, modular seal.

• Manufacturer Part Number: TS-199-3041
• Compressor Outlet Side: 3.00in (76.2mm)
• Clamp Interface: 3.00in Plazmaclamp (Vibrant Compatible)
• Connection Style: Straight
• Material: High-grade aluminum for weight savings and thermal resistance
• Application: Custom turbocharger plumbing and intercooler systems

This Turbosmart Turbo Compressor Outlet Adapter is engineered to provide a secure and efficient plumbing solution for your charge air system. Designed to bolt or clamp directly to the compressor housing, this adapter features a 90-degree elbow that allows for tight routing in cramped engine bays where space is limited.

Constructed for durability and a precision fit, this adapter transitions from the compressor outlet to a 3.00-inch hose barb, ensuring a leak-free connection under high boost pressures. It is an essential component for custom intercooler piping setups requiring a sharp turn immediately following the turbocharger.

• Precision-machined for optimal airflow and fitment
• Inlet/Outlet Size: 3.00in
• Configuration: 90 Degree Elbow
• End Style: Hose Barb for secure coupler retention
• Manufacturer Part Number: TS-199-3040

Streamline your forced induction plumbing with the Turbosmart 3.00-inch 90-degree turbo compressor outlet adapter. This precision-engineered component is specifically designed to bridge the gap between your turbocharger housing and charge piping using a Vibrant Performance Plazmaclamp assembly. It provides a secure, mechanical connection that eliminates the failure points often found with traditional silicone couplers under high boost pressures.

• Manufacturer Part Number: TS-199-3037
• Adapter Size: 3.00 inches (76.2mm)
• Angle: 90-degree elbow for tight engine bay packaging
• Compatibility: Designed for use with 3.00in Vibrant Plazmaclamp systems
• Application: Turbocharger compressor housing outlet

By utilizing this adapter, fabricators can maintain maximum flow through a tight 90-degree transition while ensuring a leak-free seal. The robust construction is built to withstand the extreme thermal cycling and vibratory loads common in high-horsepower street and track applications.

This Turbosmart Turbo Compressor Outlet Adapter is engineered to provide a robust, leak-proof transition from a standard 2.50-inch turbocharger compressor outlet to a 2.50-inch Straight Plazmaclamp assembly. Designed for high-performance forced induction systems, it replaces traditional silicone couplers and worm-drive clamps with a professional-grade mechanical connection that won't blow off under high boost.

• Adapts 2.50-inch compressor outlet to a 2.50-inch Straight Plazmaclamp interface
• Precision-machined for optimal internal flow and a secure seal
• Ideal for race-spec applications requiring high-vibration and high-pressure reliability
• Compatible with the Turbosmart Plazmaclamp system for modular plumbing
• Manufacturer Part Number: TS-199-3030

This Turbosmart adapter provides a reliable transition for turbocharger plumbing, converting a 2.50-inch compressor outlet to a 90-degree 2.50-inch hose barb connection. It is engineered to solve clearance issues in tight engine bays or to facilitate custom intercooler piping routes where a sharp, secure bend is required.

• Manufacturer Part Number: TS-199-3023
• Inlet Size: 2.50 inches
• Outlet Size: 2.50 inches
• Angle: 90-degree elbow
• Connection Type: Hose barb
• Application: Custom turbocharger compressor housing plumbing

The Turbosmart Turbo Compressor Outlet Adapter provides a secure, high-pressure connection for custom turbocharger and intercooler plumbing. This precision-engineered adapter converts a 2.50-inch compressor outlet to a 90-degree elbow specifically designed for use with the Turbosmart Plazmaclamp system.

By utilizing a Plazmaclamp interface instead of traditional silicone couplers and hose clamps, this adapter ensures a leak-free seal capable of handling high boost levels without the risk of blowing a pipe under pressure. It is an essential component for fabricators and tuners building high-performance forced induction systems where space and reliability are critical.

• Outlet Size: 2.50 inches
• Angle: 90-degree elbow
• Connection Style: Plazmaclamp flange
• Material: High-grade aluminum construction
• Manufacturer Part Number: TS-199-3020

The Turbosmart Turbo Compressor Outlet Adapter (TS-199-3019) provides a streamlined solution for custom intercooler plumbing in high-performance applications. This precision-engineered adapter converts a standard compressor outlet into a 2.50-inch 90-degree elbow, facilitating cleaner routing in tight engine bays where space is at a premium.

• Manufacturer Part Number: TS-199-3019
• Adapter Size: 2.50 inches
• Geometry: 90-Degree Elbow
• Application: Connects compressor outlets to 2.50-inch piping or Vibrant-style couplers
• Construction: Durable materials designed to maintain integrity under high boost pressure and thermal stress

The BLOX Racing 38mm wastegate flange is a precision-machined component engineered for fabricators building custom turbo manifolds or exhaust setups. Specifically designed for TiAL and Deltagate-style 2-bolt wastegates, this flange provides a reliable, flat mounting surface to ensure a leak-free seal under high-pressure and high-heat conditions.

Constructed from 1018 mild steel, this flange offers superior weldability, making it the ideal choice for merging with mild steel manifold tubing or downpipes. The through-hole design simplifies the installation process, allowing for standard hardware fitment without the risk of stripped threads during repeated assembly.

• Material: 1018 Mild Steel for excellent weldability
• Bore Size: 38mm
• Mounting Style: 2-bolt through hole
• Compatibility: Fits TiAL and Deltagate style 38mm wastegates
• Manufacturer Part Number: BXFL-00102

This Vibrant Performance V-band turbo outlet flange is engineered for custom fabrication on high-output turbo systems. Designed specifically for Garrett GTX47R Gen2, GTX50R Gen2, and GTX55R Gen2 turbochargers with a T6 turbine inlet, this flange provides a secure, leak-free connection to your downpipe or discharge plumbing.

• CNC-machined from 304 stainless steel for superior heat resistance and durability
• Designed for 4.50 inch (114.3mm) O.D. tubing
• 130mm (5.12 inch) O.D. beveled flange profile
• Integrated tapered registration ring ensures precise alignment with the turbine housing
• Precision-machined tolerances for a perfect fit to Garrett Gen2 T6 turbine components
• Manufacturer Part Number: 19866

This Vibrant Performance female V-band flange is precision-engineered for custom exhaust and intake fabrication. Designed specifically to seat against a matching male flange, it ensures a secure, leak-free connection that is easy to disassemble for maintenance or component swaps. Constructed from high-grade 304 stainless steel, it offers exceptional resistance to heat and corrosion in demanding automotive environments.

• Precision machined to fit 2-inch (50.8mm) O.D. tubing
• Fabricated from 304 stainless steel for long-term durability
• Female-style interlocking seat design for proper alignment and sealing
• Suitable for exhaust, turbo downpipes, and charge piping applications
• Manufacturer Part Number: 1488F

This Vibrant Performance individual V-band flange is engineered for professional exhaust and intake fabrication where weight reduction and high-heat durability are critical. Specifically designed to support 2.5-inch O.D. tubing, this female-style flange features a precision-machined mating surface to ensure a secure, leak-free seal when paired with a matching male flange and V-band clamp.

• Material: Grade 1 CP Titanium
• Tube Outside Diameter: 2.5 inches
• Flange Style: Female
• Manufacturer Part Number: 12490F
• Precision-machined for consistent fitment and weldability

The Vibrant Performance 1488M Male V-Band Flange is engineered to provide a secure, leak-free connection for 2-inch O.D. exhaust or intake tubing. This component is ideal for custom turbocharger systems, downpipes, and exhaust assemblies where frequent disassembly and reliable sealing are required.

Constructed entirely from 304 stainless steel, this flange offers exceptional resistance to heat and corrosion. The male-style interlocking design features a precision-machined lip that ensures perfect alignment when mated to a corresponding female v-band flange, preventing exhaust leaks and simplifying the fabrication process.

• Manufacturer Part Number: 1488M
• Configuration: Male Interlocking Design
• Material: 304 Stainless Steel
• Compatible Tubing Size: 2.000" (50.8mm) O.D.
• Applications: Turbo piping, downpipes, wastegates, and custom exhaust systems

The Ticon Industries 103-07610-1000 is a precision-engineered 3.0-inch Vanjen-style titanium weld ferrule, designed for fabricators building high-performance charge piping and intake systems. This component provides a lightweight, corrosion-resistant alternative to traditional aluminum or stainless steel ferrules, making it ideal for motorsport applications where every ounce and connection integrity matters.

Constructed to weld directly to 3.0-inch titanium tubing, this ferrule is designed for use with Vanjen-style quick-release clamp assemblies. This setup provides a secure, leak-free seal capable of handling high-boost pressures while allowing for the engine movement and thermal expansion that often cause traditional silicone couplers to fail.

• Material: High-quality Titanium
• Nominal Size: 3.0 inches (76mm)
• Style: Vanjen-compatible weld-on ferrule
• Application: Turbocharger charge pipes, intercooler plumbing, and custom intakes
• Manufacturer Part Number: 103-07610-1000

The Stainless Bros PTE T4 Pro-Mod Turbo Inlet Flange is engineered for high-performance fabrication, specifically designed to interface with Precision Turbo Pro-Mod series T4 housings. Precision CNC-machined from 304 stainless steel, this flange provides a stable, warp-resistant mating surface capable of withstanding the extreme thermal cycles of heavy-duty forced induction systems.

• Fits Precision Turbo (PTE) T4 Pro-Mod turbine housings
• Inlet Diameter: 2.75 in. (approx. 70mm)
• Material: High-grade 304 Stainless Steel for superior corrosion resistance and durability
• Precision-machined surface ensures a leak-free seal at the turbine housing
• Manufacturer Part Number: 603-09014-6170

This Stainless Bros turbine outlet flange is engineered for precision fitment on Borg Warner T4 turbochargers equipped with a 3-5/8" (3.625") V-band discharge. It provides a reliable, high-flow transition from the turbine housing to a 3" downpipe or exhaust section.

CNC-machined from high-grade 304 stainless steel, this flange is designed to withstand the extreme thermal cycling and corrosive environments found at the turbine exit. The precision-ground sealing surface ensures a leak-free connection when paired with the appropriate V-band clamp, maintaining exhaust velocity and preventing dangerous under-hood leaks.

• Material: 304 Stainless Steel
• Turbo Side Fitment: Borg Warner T4 housings with 3-5/8" V-band discharge
• Downpipe Connection: 3" OD Tubing
• Manufacturing Process: Precision CNC-Machined
• Manufacturer Part Number: 603-07614-4000