Banks Dual Heat Capable Monster-Ram® improves throttle response and fuel economy by eliminating airflow restrictions. The system prevents severe engine damage by replacing the failure-prone factory grid heater with the Banks high-flow intake plate. The factory heater can't fail if it's not there. Monster-Ram® is the only 50-state emissions-compliant RAM intake elbow. Why It's Better. A True Monster Of A RAM. The all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock over 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Banks High-flow coil heater-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

The Banks Monster-Ram Turbo Inlet for the 2017-2026 Duramax L5P is the only intake elbow that outperforms stock without the destructive effects of turbo surge, caused by competitors. More than a year in development, the Monster-Ram increases air density to the compressor. This results in slower turbo shaft speed and a reduction in time to boost. With slower shaft speeds, throttle response is improved, and turbo life is increased.Key Features: Improved throttle response. Reduced turbo shaft speed. Increased turbo life (thanks to reduced shaft speed). 11% lower turbo drive pressure. 23% greater Gulp Capacity (volume). 17% larger turbo inlet size. 18.7% less restrictive than stock. 11.9% increase in mass air flow over stock. Retains PCV geometry. Cast aluminum. Banks red powder coat. Or Natural aluminum for custom coating. 50-State Emission Compliant CARB-EO D-161-158

• 11% Lower Turbo Drive Pressure, Improves Throttle Response and Turbo Life, No Turbo Surge

This Part Fits:

Feeds your Cummins engine cooler, denser, outside air for greater power and fuel economy. Up to 66% greater flow over stock. Extensively tested and validated. Banks Ram-Air Intake feeds your Cummins engine cooler, denser, outside air for greater power and fuel economy. Up to 66% greater flow over stock. Its performance is extensively tested and validated: in the computer, using Computational Fluid Dynamics software - on the flowbench - and later, on the vehicle. Let the others build and ship: Ram-Air's performance is proven, again and again! Key Features: Extensively tested & validated. Enclosed housing keeps out hot, power-robbing engine air. Inhales cooler outside air for more power & MPG. Giant filter maximizes high-flow filtration. Helps engine run cooler. Accommodates engine movement. Prevents component damage. Extends service life and requires fewer cleanings. Dry Air Filter element. 5-year Limited Warranty.

• 66% greater Mass Air Flow over stock, Better power delivery, efficiency, MPG
• 5-Year Limited Warranty

This Part Fits:

Flowbench developed, dyno proven. Improves airflow up to 33% . Huge cold-air inlet and extra large outlet. Intake tube shaped by CFD software. Cooler temps, less smoke and more MPG. Banks Ram-Air Superiority. Increase Power and MPG. Banks Ram-Air Intake System replaces the factory's flat panel filter with a large conical filter that provides maximum high-flow filtration. The Ram-Air's opening dwarfs the stock's inlet. The huge inlet, enclosed housing and much larger tubing reduce restrictions, dramatically improving airflow to the cylinders. Intake tube shaped by CFD software. Please note: This Ram-Air intake system Cannot be installed on a vehicle that has the Banks Brake. New Filter Options! Choose from the traditional red, Oiled filter or the all-new black, Dry filter. Key Features: Extensively tested & validated. Enclosed housing keeps out hot, power-robbing engine air. Inhales cooler outside air for more power & MPG. Giant filter maximizes high-flow filtration. Helps engine run cooler. Accommodates engine movement. Prevents component damage. Extends service life and requires fewer cleanings. 5-year Limited Warranty. Increases airflow up to 33%. Outflows stock and competitors. Huge cold-air inlet. Extra large outlet. Cooler temps, less smoke and more MPG. Will not work with Banks Brake

• Outflows stock by 33% and Lowers EGTs, Eliminates factory airbox restrictions
• 5-Year Limited Warranty

This Part Fits:

Outflows stock up to 50 Percent. Reduces exhaust gas temps (EGTs). Exclusive 4-1/2 inch bellows to accommodate engine movement. Enclosed housing keeps out hot, power-robbing engine air. Easy filter access for monitoring & cleaning. Testing, testing & more testing. Banks Ram-Air Intake Systems are tested and proven. They start out as CAD software prototypes and are put through flow simulations. After a hardware prototype is made, it's tested on a flowbench. Then it's tested on the vehicle. And finally, Banks' density-tests the Ram-Air against stock and many competitors. Proven design. Proven performance. Banks Ram-Air Intake maximizes the flow of cool, dense air to the engine for greater power and fuel economy. Thanks to its enclosed cold-air housing, huge inlet with giant dome-shaped filter, and streamlined internal design, it flows 50% better than stock! Infact, it performs so well that it delivers greater air density to the turbo's inlet than all competitors tested. Add on the optional Super-Scoop (42190 for standard bumper or 42191 for painted bumper), and the results are even better! Longer service life, too. An aftermarket exclusive: with 4-1/2" bellows, Banks Ram-Air accommodates engine movement, which protects the components and extends service life. What's more, Ram-Air is designed to not cause fault or error codes. It's all about density. And Banks Ram-Air Intake delivers. The harder you work your truck, the more Banks Ram-Air Intake improves power and fuel economy! Key Features: Enclosed housing keeps out hot, power-robbing engine air. Reduces exhaust gas temps and sooty, black smoke. Inhales cooler outside air for more power & MPG. Extends service life and requires fewer cleanings. Giant filter maximizes high-flow filtration. Extensively tested & validated. Outflows stock up to 50%. 5-year Limited Warranty. OILED Air Filter Element. Exclusive 5 inch bellows

• Gain up to +28hp/+52lb-ft, 50% Less Restrictive +6.4% intake density & lower EGT
• 5-Year Limited Warranty

This Part Fits:

Cold-air intake with large lifetime filter, enclosed housing and large tubing offers huge improvements over stock flow, increasing power and fuel economy. Banks Ram-Air Superiority. Banks opens up your truck's breathing with a flowbench-developed and dyno-proven Ram-Air Intake System that is less restrictive than stock. Ram-Air's filter has a huge outlet with deep filter pleats that maximize flow and a complete air filter housing that draws in cooler, denser air to the engine for greater power and fuel economy. Filter on a stick: a joke that's not funny. A filter on a stick is a bad joke. It's wide-open to hot, power-robbing underhood engine air. Ram-Air houses a giant filter in an enclosed cold-air box, which inhales cool, dense outside air. All for more power, mileage, and it's designed to not cause fault or error codes. The Banks Ram-Air utilizes the stock base for an easy, hassle-free fit that ensures a secure connection with no disruption to air flow. Key Features: Enclosed housing keeps out hot, power-robbing engine air. Inhales cooler outside air for more power and MPG. Extends service life and requires fewer cleanings. Giant filter maximizes high-flow filtration. Beats stock and the competition. 5-year Limited Warranty. Helps engine run cooler. Oiled Air Filter Element

• Outflows stock by 51.3%, Inhales cold air for more power and MPG
• 5-Year Limited Warranty

This Part Fits:

Cold-air intake with large lifetime filter, enclosed housing and large tubing doubles stock flow, increasing power and fuel economy. Banks Ram-Air Superiority. 4.0L 6-CYL: 1997-06 Wrangler TJ. Banks Ram-Air Intake System replaces the factory's flat panel filter with a large conical filter that provides maximum high-flow filtration. The Ram-Air's opening is over twice as big as stock's, and without the 90-Degree detours that choke airflow and kill power. The huge inlet, enclosed housing and much larger tubing reduce restrictions, dramatically improving airflow to the cylinders. The results are impressive: Banks Ram-Air Intake more than doubles the factory intake's airflow, improving the Jeep's power and fuel economy. And Banks Ram-Air is designed to accommodate engine movement, which prevents component damage for reliable service life. Key Features: Enclosed housing keeps out hot, power-robbing engine air. Outflows the stock intake by a staggering 116%. Inhales cooler outside air for more power & MPG. Extends service life & requires fewer cleanings. Giant filter maximizes high-flow filtration. Accommodates engine movement. Prevents component damage. 5-year Limited Warranty. OILED Air Filter Element. Helps engine run cooler

• 2x gain outflows stock by 116%, Inhales cold air for more power and MPG, US Patent #10,138,851 B2
• 5-Year Limited Warranty

This Part Fits:

This 9” tall 360-degree radial flow air filter features a 5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicle's OE air inlet with no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware, and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Stainless-steel clamps are included for strength, and premium silicone couplings allow for ample flexibility. Magnum Force intakes are designed with fewer parts for a fast and easy installation.

• Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
• Premium Stainless-Steel Clamps and Silicone Couplings Provide a Secure Seal
• Utilizes Factory Mounting Locations for an Easy and Secure Installation
• Washable and Reusable Pro 5R Air Filter for Maximum Performance

This Part Fits:

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

• Repl. Factory Intake For Improved HP/Torque/Styling
• Rotomolded Plastic Tube For Maximum Air Flow
• Uses Pro 5R Filter For Maximum Air Flow
• Increased Horsepower And Torque
• Improved Throttle Response
• 2 Year Limited Warranty

This Part Fits:

This filter features five layers of pre-oiled cotton gauze media to provide maximum performance. Its progressive layering allows the filter to flow at high levels even when dirty. This media is perfect for street and/or track use. Pro 5R filters are easily recharged with aFe's POWER CLEANER and blue air filter oil. aFe developed this sturdy 18-gauge steel wrinkle-black powder-coated heat shield to mount onto the top of the lower half of the factory airbox to provide a hassle-free installation utilizing factory mounting locations. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This intake replaces the factory upper intake box. All hardware and components are included for a hassle-free installation. This kit utilizes high quality, stainless steel clamps and a silicone coupler.

• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Mounts to Lower Half of Factory Airbox for Easy Installation
• Measured Flow: 380 CFM @ 7" H20
• Outflows Factory Intake by 19%

This Part Fits:

Volant snorkels are designed to withstand whatever you throw at them while improving the overall performance of your air intake. Volant Snorkels draw air from an elevated position and bolt-onto the volant airbox to create an air tight seal that is ideal for dusty trails or river crossings. The air box lid also incorporates a hood seal adaptor that funnels air from a hood-mounted snorkel which extends up the passenger side of the vehicle to the roof-line. The snorkel scoop incorporates a carefully designed mesh cover that is designed to eliminate large debris from clogging the air path.

• Proven To Increase Performance For Avid Off-Road Driving
• Moves Air Location To Improve Filtration Efficiency
• Bolt On Installation - Some Cutting Required
• Bolt On Installation,Some Cutting Required
• Outflows Stock Air Intake

This Part Fits:

Vibrant Performance Aramid Reinforced Silicone 45 Degrees Transition Elbows feature High Temperature Resistant Aramid Reinforcement Fabric between each layer of silicone which allows for an impressive Operating Temperature Range of -75 Degrees F to 392 Degrees F (-60 Degrees C to 200 Degrees C). These elbows are intended for use in applications where pressurized tubing and connection points require a tight radius bend and size transition to accommodate the installation of piping in limited space. Not suitable for use with Oil/Fuel.

• 45 Degree Transition Elbow

This K&N cold air intake system is engineered for your Jeep Wrangler 4xE L4-2.0L Hybrid. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow to your engine and provides a guaranteed increase of 19.24 horsepower and 25.47 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed enclosed air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

• PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle

This Part Fits:

Stage 1 upgrade for the 2020-2025 L5P Duramax improves airflow between the turbo and engine for improved efficiency, throttle response, and turbo spool up. Eliminates weak points in the factory design that can lead to boost leaks or complete failures in hard working and high performance applications. - Kit replaces the restricted 2-piece, resonator equipped, 2.5 in. diameter driver (hot) side intercooler pipe and leak-prone 2-piece plastic / rubber passenger (cold) side pipe with WCFab's heavy duty 3 in. diameter 1-piece Driver (Hot) Side and 3.5 in. diameter Passenger (Cold) Side L5P Intercooler Pipes. Made in the USA from high strength, heavy duty 14 ga. aluminum tube with smooth, aerodynamic mandrel bends for increased durability and optimized flow. 3 in. Driver Side pipe eliminates the OEM resonator and middle boot joint for improved flow and durability and includes high quality reinforced silicone boots and stainless t-bolt clamps for superior temperature resistance and boost pressure holding capabilities. 3.5" Passenger Side pipe features a CNC machined flange with a double o-ring seal and an upgraded silicone boot in order to withstand higher boost pressures than the factory components to increase reliability and eliminate blown factory boots and horsepower robbing boost leaks. Full assembly finished in your choice of WCFab's signature custom powder coat colors for a look as unique as your truck. Installs with basic hand tools. Compatible with stock trucks, no tuning required. Saves $25 vs. buying individually.

• OEM Clip Ring Design at Y-bridge connection replaced by high quality silicone boot and stainless steel t-bolt clamps for improved sealing and ability to hold higher boost pressures without leaking
• CNC Machined Flange with Double O-Rings provides an improved sealing surface to eliminate boost leaks.
• Silicone Boots, Stainless Steel T-Bolt Clamps, O-Rings, Intercooler Outlet Clip
• Will fit on stock truck no other modifications or upgrades necessary!
• 3 in. Hot Side Intercooler Pipe & 3.5 in. Cold Side Intercooler Pipe
• Retains factory connection points and sensors
• NO Tuning required, bolt on!
• Custom Powder Coat Finish
• Made In the USA

This Part Fits:

Stage 1 upgrade for the 2020-2025 L5P Duramax improves airflow between the turbo and engine for improved efficiency, throttle response, and turbo spool up. Eliminates weak points in the factory design that can lead to boost leaks or complete failures in hard working and high performance applications. - Kit replaces the restricted 2-piece, resonator equipped, 2.5 in. diameter driver (hot) side intercooler pipe and leak-prone 2-piece plastic / rubber passenger (cold) side pipe with WCFab's heavy duty 3 in. diameter 1-piece Driver (Hot) Side and 3.5 in. diameter Passenger (Cold) Side L5P Intercooler Pipes. Made in the USA from high strength, heavy duty 14 ga. aluminum tube with smooth, aerodynamic mandrel bends for increased durability and optimized flow. 3 in. Driver Side pipe eliminates the OEM resonator and middle boot joint for improved flow and durability and includes high quality reinforced silicone boots and stainless t-bolt clamps for superior temperature resistance and boost pressure holding capabilities. 3.5" Passenger Side pipe features a CNC machined flange with a double o-ring seal and an upgraded silicone boot in order to withstand higher boost pressures than the factory components to increase reliability and eliminate blown factory boots and horsepower robbing boost leaks. Full assembly finished in your choice of WCFab's signature custom powder coat colors for a look as unique as your truck. Installs with basic hand tools. Compatible with stock trucks, no tuning required. Saves $25 vs. buying individually.

• OEM Clip Ring Design at Y-bridge connection replaced by high quality silicone boot and stainless steel t-bolt clamps for improved sealing and ability to hold higher boost pressures without leaking
• CNC Machined Flange with Double O-Rings provides an improved sealing surface to eliminate boost leaks.
• Silicone Boots, Stainless Steel T-Bolt Clamps, O-Rings, Intercooler Outlet Clip
• Will fit on stock truck no other modifications or upgrades necessary!
• 3 in. Hot Side Intercooler Pipe & 3.5 in. Cold Side Intercooler Pipe
• Retains factory connection points and sensors
• NO Tuning required, bolt on!
• Custom Powder Coat Finish
• Made In the USA

This Part Fits:

Vibrant Performance Aramid Reinforced Silicone Straight Hose Couplers feature a 4-ply Aramid reinforcement fabric between each layer of silicone which allows for an impressive operating temperature range of -75 Degrees F to 392 Degrees F (-60 Degrees C to 200 Degrees C). Our Straight Hose couplers are commonly found off of turbo compressor housings, intercooler end tanks and charge pipe assemblies. Suitable for water, coolant and air service only.

• Capable of withstanding extreme temperatures and heavy duty pressure conditions without swelling or bursting
• Rated for temperatures ranging from -65 F to 350 F
• Hand wrapped and feature 4-ply reinforcement
• Meets or exceeds SAE J20 specifications
• Suitable for coolant service
• 4 Ply Reinforced Silicone
• 1 Year Limited Warranty
• UV and Ozone resistant

Vibrant Performance Aramid Reinforced Silicone Transition Hose Couplers feature High Temperature Resistant Aramid Reinforcement Fabric between each layer of silicone which allows for an impressive Operating Temperature Range of -75 Degrees F to 392 Degrees F (-60 Degrees C to 200 Degrees C). Suitable for Water, Coolant and Air service only.

This Part Fits:

CORSA Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing free-flowing filters, CORSA Performance Intakes outflow stock systems to increase overall performance while protecting your engine. This intake features Volants high performance , 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This filter is specifically designed to allow the highest air flow rate possible for maximum power gains but deliver a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Whether On-Road or Off, CORSA Performance has you covered.

• Drytech Filtration Is Ideally Suited For Maximizing Airflow And Performance While Reducing Maintenance Intervals
• Corsas Air Boxes Are Built Rugged And Designed To Protect The Filter From The Elements
• Features Corsas Latest Filtration Technology/Drytech 3D
• Easy Bolt On Installation - Installs in Under 1 Hour
• Smoked Acrylic See-Through Airbox Lid
• Outflows Stock Air Intake
• Lifetime Warranty
• Made In The USA

This Part Fits:

CORSA Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing free-flowing filters, CORSA Performance Intakes outflow stock systems to increase overall performance while protecting your engine. This air intake comes equipped with CORSAs Latest Filtration Technology, DryTech 3D, a high flow, no oil, low maintenance (up to 50K miles) solution to your filtration needs. DryTech filters are nearly 98% efficient and mazimize airflow to increase vehicle performance. Simply vaccuum the surface for a quick clean or rinse with soap and water then let dry, occassionally to maintain peak filtration performance. Whether On-Road or Off, CORSA Performance has you covered.

• Drytech Filtration Is Ideally Suited For Maximizing Airflow And Performance While Reducing Maintenance Intervals
• Corsas Air Boxes Are Built Rugged And Designed To Protect The Filter From The Elements
• Features Corsas Latest Filtration Technology/Drytech 3D
• Easy Bolt On Installation - Installs in Under 1 Hour
• Smoked Acrylic See-Through Airbox Lid
• Outflows Stock Air Intake
• Lifetime Warranty
• Made In The USA

This Part Fits:

CORSA Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing free-flowing filters, CORSA Performance Intakes outflow stock systems to increase overall performance while protecting your engine. This air intake comes equipped with CORSAs Latest Filtration Technology, DryTech 3D, a high flow, no oil, low maintenance (up to 50K miles) solution to your filtration needs. DryTech filters are nearly 98% efficient and mazimize airflow to increase vehicle performance. Simply vaccuum the surface for a quick clean or rinse with soap and water then let dry, occassionally to maintain peak filtration performance. Whether On-Road or Off, CORSA Performance has you covered.

• Drytech Filtration Is Ideally Suited For Maximizing Airflow And Performance While Reducing Maintenance Intervals
• Corsas Air Boxes Are Built Rugged And Designed To Protect The Filter From The Elements
• Features Corsas Latest Filtration Technology/Drytech 3D
• Easy Bolt On Installation - Installs in Under 1 Hour
• Smoked Acrylic See-Through Airbox Lid
• Outflows Stock Air Intake
• Lifetime Warranty
• Made In The USA

This Part Fits:

The CORSA Performance C7 air intake is made from pure 100% carbon fiber construction and pairs aesthetics and design for maximum strength and performance. Compared to stock; the optimized shape of the CORSA Performance C7 air intake, combined with high-performance filtration, increases overall performance and fuel economy. Dyno tuned for maximum results the CORSA Performance intake coaxes up to an additional 15HP and 15 FT LBS TQ from the LT-1 engine without a tune. The direct bolt-on system installs in minutes. The intake comes available with your choice of high-performance filtrations options; oiled or non-oiled DryTech filters. The C7 Corsa Performance carbon fiber Intake is backed by a Limited Lifetime Warranty to the original purchaser.

• Machined Black Anodized Aluminum MAF Mounting Bracket
• High Flow 5 Layer Oiled Cotton Gauze MaxFlow 5 Filter
• Limited Lifetime Warranty Air Intake 1 Year Filter
• 100 Percent Carbon Fiber Construction
• Up To 15 HP/15 TQ Increase
• Easy Bolt On Installation
• No Tune Required

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 8” tall 360-degree radial flow air filter features a 4" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals, while reinforced metal provides maximum strength to prevent filter collapse. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing connects to the factory air inlet on the fender to capture cool air away from the hot engine air. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps and silicone coupler are included for strength and durability. Momentum GT intakes are designed with fewer parts for a fast and easy installation.

• Sealed Housing Captures Cool Air Optimizing Performance While Maintaining Factory Air Inlet
• Premium Clamps and Silicone Coupler Provide a Secure Seal and Excellent Durability
• Large Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable And Reusable Pro DRY S Air Filter For Maximum Convenience

This Part Fits:

Large Three Layer Performance Air Filter:The Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This aFe POWER Pro DRY S is a 9" tall, oil-free, 360-degree radial flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use.Unique One-Piece Housing:The textured one-piece sealed housing, constructed of cross-linked polyethylene (XLPE), is used to eliminate the use of an overabundance of parts and ensure the coolest air intake charge possible. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. An optional auxiliary air inlet pulls in additional cool air from the inner fender when under power.Massive Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Premium Components:Stainless-steel T-Bolt clamps and an injection molded coupling are included for strength and durability, while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts and utilize factory mounting points for a fast and easy installation.Note:Application includes models equipped with the e-torque engine option.

• Get more power across your everyday RPM range with this Momentum GT Cold Air Intake System. Its massive intake tube and filter ensure it not only will perform - but also will draw attention to your new RAM 1500's engine bay.
• Premium T-Bolt Clamps and Injection Molded Couplings Provide a Secure Seal
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro DRY S Air Filter for Life-Long Convenience
• Massive Heat-Resistant Intake Tube with Sealed One-Piece Housing
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

4" Intake Kit for 2003-2007 Dodge Ram 2500 / 3500 5.9L Cummins with Factory or OEM style Turbocharger. - - This high flow, fabricated aluminum intake pipe with dry filter assembly replaces the restrictive plastic factory parts on your diesel for improved engine performance. Increases air flow to your turbo producing improved horsepower, torque, and quicker throttle response. All aluminum construction features large diameter 4" piping with smooth aerodynamic bends to improve intake air velocity, volume, and provide more aggressive engine and turbo sound during acceleration. - - High quality hardware, silicone boot, seals, and stainless steel t-bolt clamps ensure optimum durability and ease of installation. Includes high quality 4" dry air filter with included hydrophobic pre-filter cover, to help keep your MAF sensor, turbo, and engine airways contaminant free. - - Full assembly finished in your choice of WCFab's signature custom powder coat colors for a look as unique as your truck. Made in USA.

• Outerwear's Pre-Filter Cover
• Custom Powder Coating
• Boots and Clamps
• Dry Air Filter
• 4" Intake

This Part Fits:

Volant Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing free-flowing filters, Volant Performance Intakes outflow stock systems to increase overall performance while protecting your engine. This air intake comes with a Volant Primo Diesel air filter made with 8 layers of the highest quality textiles; pleated between a top and bottom aluminum screen, designed specifically for severe duty trucks. Primo Diesel air filters are engineered for the highest air flow rate possible, necessary for a high-performance diesel engine and offer very long filter life and service intervals of up to 40,000 miles depending on driving conditions. Whether On-Road or Off, Volant Performance has you covered.

• Built Rugged And Designed To Protect The Filter From The Elements
• Easy Bolt On Installation - Installs in Under 1 Hour
• Outflows Stock Air Intake
• Insulated Metallic Lid
• Increased Air Flow
• Filter Type/Oil
• Free Flowing
• Washable

This Part Fits:

Volant Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing Donaldson Powercore Ultra-Web free-flowing air filters, Volant Performance Intakes outflow stock systems to increase overall vehicle performance while providing the ultimate in engine protection. Donaldson PowerCore(R) Ultra Web Air Filters are 99.96% efficient and offer an unmatched combination of maintenance-free air filtration (up to 150K miles) and performance in the marketplace today.

• Donaldson PowerCore® Ultra-Web Air Filters Are Ideal For Severe Duty Work Trucks And Dry, Dusty, Arrid Environments And Are Maintenance-Free. Donaldson PowerCore® Air Filters Come With a 4 Year 100K Mile Warranty.
• Outflows Stock Air Intake. Features Volant Exclusive, No Maintenance, Donaldson Powercore® Ultra-Web Filtration Technology for Maximum Engine Protection (99.96% Efficient).
• Volant's Air Boxes Are Built Rugged And Designed To Protect The Filter From The Elements While Shielding Away Engine Heat To Maximize Performance
• 99.96% Unparalleled Filtration Efficiency And Performance
• Built And Designed Boxes Protect Fixture From Elements
• Easy Bolt On Installation - Installs in Under 1 Hour
• Protect Engine Heat Maximizing Performance
• Easy Bolt On Installation In Under 1 Hour
• Smoked Acrylic See-Through Airbox Lid
• No Maintenance Dry Air Filter
• CARB Approved (See Aces Info)
• Maximum Filtration Capacity
• Outflows Stock Air Intake
• Features Volant Exclusive
• 4 Year 100K Mile Warranty
• Easy Access Insulated Lid
• Stainless Steel Clamps

This Part Fits:

Volant Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing free-flowing filters, Volant Performance Intakes outflow stock systems to increase overall performance while protecting your engine. This intake features Volant's high performance , 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This filter is specifically designed to allow the highest air flow rate possible for maximum power gains but deliver a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Whether On-Road or Off, Volant Performance has you covered.

• Outflows Stock Air Intake. Features Volant's, Free Flowing, Re-Usable Oiled Cotton Gauze Air Filters Designed to Maximize Air Flow For On-Road Performance.
• Filters Are 98% Efficient And Offer Extended Maintenance Intervals (Up to 40K Miles). Clean And Re-Oil Filters As Needed To Maintain Peak Performance.
• Volant's Air Boxes Are Built Rugged And Designed To Protect The Filter From The Elements While Shielding Away Engine Heat To Maximize Performance
• Built Rugged And Designed To Protect The Filter From The Elements
• Easy Bolt On Installation - Installs in Under 1 Hour
• Smoked Acrylic See-Through Airbox Lid
• CARB Approved (See Aces Info)
• Outflows Stock Air Intake
• Increased Air Flow
• Filter Type = Oil
• Filter Type/Oil
• Washable = Yes
• Free Flowing
• Washable

This Part Fits:

Volant Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing free-flowing filters, Volant Performance Intakes outflow stock systems to increase overall performance while protecting your engine. This intake features Volant's high performance , 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This filter is specifically designed to allow the highest air flow rate possible for maximum power gains but deliver a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Whether On-Road or Off, Volant Performance has you covered.

• Outflows Stock Air Intake. Features Volant's, Free Flowing, Re-Usable Oiled Cotton Gauze Air Filters Designed to Maximize Air Flow For On-Road Performance.
• Filters Are 98% Efficient And Offer Extended Maintenance Intervals (Up to 40K Miles). Clean And Re-Oil Filters As Needed To Maintain Peak Performance.
• Volant's Air Boxes Are Built Rugged And Designed To Protect The Filter From The Elements While Shielding Away Engine Heat To Maximize Performance
• Built Rugged And Designed To Protect The Filter From The Elements
• Easy Bolt On Installation - Installs in Under 1 Hour
• Outflows Stock Air Intake
• Insulated Metallic Lid
• Increased Air Flow
• Filter Type = Oil
• Filter Type/Oil
• Washable = Yes
• Free Flowing
• Washable

This Part Fits:

Volant Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing Donaldson Powercore Ultra-Web free-flowing air filters, Volant Performance Intakes outflow stock systems to increase overall vehicle performance while providing the ultimate in engine protection. Donaldson PowerCore(R) Ultra Web Air Filters are 99.96% efficient and offer an unmatched combination of maintenance-free air filtration (up to 150K miles) and performance in the marketplace today.

• Donaldson PowerCore® Ultra-Web Air Filters Are Ideal For Severe Duty Work Trucks And Dry, Dusty, Arrid Environments And Are Maintenance-Free. Donaldson PowerCore® Air Filters Come With a 4 Year 100K Mile Warranty.
• Outflows Stock Air Intake. Features Volant Exclusive, No Maintenance, Donaldson Powercore® Ultra-Web Filtration Technology for Maximum Engine Protection (99.96% Efficient).
• Volant's Air Boxes Are Built Rugged And Designed To Protect The Filter From The Elements While Shielding Away Engine Heat To Maximize Performance
• Built Rugged And Designed To Protect The Filter From The Elements
• Easy Bolt On Installation - Installs in Under 1 Hour
• Easy Bolt On Installation In Under 1 Hour
• Smoked Acrylic See-Through Airbox Lid
• Outflows Stock Air Intake
• Easy Access Insulated Lid
• Stainless Steel Clamps
• No Maintenance

This Part Fits: