The Forgestar F14 Drag wheel is engineered for high-performance track applications where reducing unsprung weight and optimizing tire fitment are critical for traction. This 17x9.5 wheel features the signature F14 mesh design, specifically optimized in the Drag series to handle the high-torque demands of launches while providing clearance for performance brake systems.

• Size: 17x9.5
• Bolt Pattern: 6x135
• Offset: ET25
• Backspacing: 6.23in
• Finish: Satin Black
• Series: F14 Drag

The Satin Black finish provides a durable, stealthy aesthetic that resists track grime and brake dust. With a 6.23in backspacing and ET25 offset, this wheel is designed for precise hub-centric fitment on 6x135 bolt pattern vehicles, ensuring a stable platform for wide drag radials or slicks.

Complete your Forgestar wheel setup with this genuine 2.45-inch flat O-ring center cap. Designed for a precise fit into compatible hub bores, this cap features a clean, low-profile flat face for a sleek, flush appearance that complements performance-oriented builds.

The O-ring retention system ensures a secure, vibration-resistant friction fit without the need for plastic clips that can become brittle or break over time. These caps serve as a direct replacement for lost or damaged components, helping to protect your vehicle's axle nut and hub assembly from dust, moisture, and road debris.

• Manufacturer: Forgestar
• Part Type: Wheel Center Cap
• Profile: Flat
• Diameter: 2.45 inches
• Retention: O-Ring Seal

The Forgestar F14 Beadlock wheel bridges the gap between lightweight racing performance and the mechanical security required for high-torque applications. Featuring the iconic 14-spoke mesh design, this wheel is engineered using rotary forged flow forming technology, which increases the structural density of the aluminum to provide a higher load rating while reducing unsprung weight.

• Model: F14 Beadlock
• Diameter/Width: 17x10
• Bolt Pattern: 6x135
• Offset: ET42 (+42mm)
• Backspacing: 7.15 inches
• Finish: Gloss Black

Built for drivers who need to maintain tire bead seat integrity, the integrated beadlock ring prevents the tire from slipping or deforming under heavy acceleration or low-pressure use. The durable gloss black finish is designed to withstand the heat and debris common at the drag strip or off-road trail. This wheel includes the beadlock ring and the necessary hardware for a complete installation.

The Forgestar D5 is a rotary forged drag racing wheel engineered to provide the strength and weight savings essential for competitive track performance. By utilizing flow-formed construction, this wheel significantly reduces unsprung mass compared to standard cast alternatives, aiding in improved 60-foot times and overall vehicle acceleration.

• Model: Forgestar D5
• Size: 18x10
• Bolt Pattern: 5x120.65 (5x4.75in)
• Offset: +25mm
• Backspacing: 6.5in
• Finish: Gloss Black with Machined Lip
• Construction: Rotary Forged / Flow Formed

Designed specifically for the drag strip, the D5 barrel profile is optimized to clear many performance brake systems while providing the necessary width to support wide drag radials or slicks. The gloss black finish with a machined lip provides a classic racing aesthetic that holds up to the rigors of the track.

The Forgestar X12 Series wheel delivers a striking balance of high-end luxury aesthetics and performance-driven engineering for modern 6-lug trucks and SUVs. Utilizing a rotary-formed monoblock construction, the X12 significantly reduces unsprung weight to improve handling and traction without sacrificing the structural integrity required for heavy-duty use.

Fits select 6-lug Ford F-150, Chevrolet Silverado, GMC Sierra, and Cadillac trucks and SUVs with a 6x139.7 bolt pattern. The bold multi-spoke layout and aggressive deep concave profile create a commanding stance, while the engineered barrel clearance comfortably accommodates larger big brake kits.

• Model: X12 Series
• Size: 24x10
• Bolt Pattern: 6x139.7
• Offset: ET30
• Backspacing: 6.68"
• Finish: Gloss Black
• Construction: Rotary Formed Monoblock
• Profile: Deep Concave

Fits select 2004-2024 Ford F-150 and Expedition models with a 6x135 bolt pattern.

The Forgestar X12 Series wheel delivers a striking balance of high-end luxury aesthetics and performance-driven engineering for modern full-size trucks. Designed with a bold multi-spoke layout and an aggressive deep concave profile, these wheels create a commanding stance. Utilizing a rotary-formed monoblock construction, the X12 reduces unsprung weight to improve handling and traction without sacrificing the structural integrity required for heavy-duty applications. The wheel barrel is engineered with excellent clearance to comfortably accommodate larger big brake kits.

• Series: X12
• Construction: Rotary Formed Monoblock
• Size: 22x10
• Bolt Pattern: 6x135
• Offset: +30mm (ET30)
• Backspacing: 6.68in
• Finish: Gloss Black
• Profile: Deep Concave

The Forgestar F14 Drag Series wheel is purpose-built for high-performance drag racing applications where every ounce of unsprung weight matters. Utilizing Forgestar’s proprietary Rotary Forging process, the F14 Drag provides the strength of a forged wheel with the weight savings necessary to improve 60-foot times and overall trap speeds. This specialized wheel is engineered to withstand the high-torque loads of hard launches while maintaining its structural integrity.

This 20x10 configuration features the iconic 14-spoke mesh design, providing excellent brake caliper clearance and a timeless aesthetic. The Satin Black finish is applied to resist the heat and track debris common in competitive racing environments. These wheels are a direct solution for racers looking to optimize their wheel and tire setup for maximum traction without sacrificing the modern look of a large-diameter wheel.

• Model: F14 Drag
• Size: 20x10
• Bolt Pattern: 6x135
• Offset: +38mm
• Backspacing: 6.99 inches
• Construction: Rotary Forged / Flow Formed
• Finish: Satin Black

The Forgestar X12 Series wheel delivers a precise balance of luxury aesthetics and performance engineering for 6-lug trucks and SUVs. Featuring a bold multi-spoke layout and an aggressive deep concave profile, this wheel is designed to improve both the stance and the handling characteristics of your vehicle. By utilizing rotary-formed monoblock construction, the X12 significantly reduces unsprung weight and rotating mass, leading to better suspension response and improved traction without compromising structural integrity.

• Rotary-formed monoblock construction for exceptional strength-to-weight ratio
• Deep concave profile for an aggressive, commanding stance
• Multi-spoke design provides excellent barrel clearance for larger big brake kits (BBK)
• Finished in a durable Satin Anthracite for a premium, understated look
• Designed specifically for 6-lug fitments including 6x135 bolt patterns

Specifications:

• Part Type: Wheel
• Series: Forgestar X12
• Size: 22x10
• Bolt Pattern: 6x135
• Offset: ET30
• Backspacing: 6.68in
• Finish: Satin Anthracite

Maintain the premium aesthetic of your wheels with this genuine Forgestar center cap. Featuring a flat-profile design for a sleek, flush look, this cap combines a genuine carbon fiber lens with a polished chrome base to complement high-performance wheel finishes.

• Authentic Forgestar replacement part
• Carbon fiber lens construction for a high-end technical look
• Polished chrome base for durability and corrosion resistance
• 2.45-inch (approximately 62mm) outer diameter
• Flat profile design sits flush with the wheel center bore
• O-ring mounting system ensures a secure, vibration-resistant fit

The Forgestar D5 Beadlock wheel is engineered specifically for high-horsepower drag racing applications. Utilizing a rotary forged flow-forming process, this 18x12 wheel provides the structural integrity needed to withstand hard launches while maintaining a lower rotational mass than traditional cast wheels. The functional beadlock ring prevents the tire from slipping on the rim under extreme torque, ensuring maximum traction and consistent 60-foot times.

• Series: D5 Beadlock
• Diameter and Width: 18x12
• Bolt Pattern: 5x120.65
• Offset: +56mm
• Backspacing: 8.8 inches
• Finish: Gloss Black
• Construction: Flow-Formed Aluminum
• Manufacturer Part Number: F00182063P56

Finished in a resilient gloss black, this wheel is designed for enthusiasts who require a technical, track-ready setup. The 5x120.65 bolt pattern and +56mm offset are specifically suited for performance platforms that accommodate a wide rear footprint and high-clearance brake systems.

The Forgestar F14 rotary forged wheel utilizes a sophisticated flow-forming process that significantly reduces unsprung weight without compromising structural integrity. This manufacturing technique results in a wheel that offers the strength of a forged rim at a more accessible price point, improving acceleration, braking, and suspension response.

This 18x10-inch F14 features a timeless multi-spoke mesh design finished in a deep Gloss Black. Engineered for high-performance applications, it provides the clearance necessary for large brake calipers while maintaining a precise +30mm offset for optimal fitment and stance.

• Brand: Forgestar
• Series: F14
• Diameter: 18 inches
• Width: 10 inches
• Bolt Pattern: 5x120.65
• Offset (ET): +30mm
• Backspacing: 6.7 inches
• Finish: Gloss Black
• MPN: F25180062P30

The Forgestar X14 Series wheel delivers a blend of aggressive multi-spoke styling and rugged durability designed for modern trucks and SUVs. This 22x10 wheel features a premium Gloss Black finish that provides a sleek, high-end appearance while maintaining resistance against road debris and the elements. Engineered for precision fitment, the X14 utilizes advanced manufacturing to ensure a high strength-to-weight ratio for improved performance and handling.

• Series: X14
• Diameter: 22 inches
• Width: 10 inches
• Bolt Pattern: 6x139.7
• Offset: +30mm (ET30)
• Backspacing: 6.7 inches
• Finish: Gloss Black
• Manufacturer Part Number: F25120084P30

Upgrade your vehicle's performance and appearance with the Forgestar CF5V Series wheel. This 19x10 wheel features a classic Y-spoke design engineered to balance lightweight construction with structural rigidity, making it an excellent choice for performance-oriented street and track applications.

Finished in a premium Satin Black, this wheel offers a modern, understated look that resists the elements. The specific ET30 offset and 6.7-inch backspacing are designed to provide a precise fit for vehicles utilizing a 5x120.65 bolt pattern. Each wheel is manufactured to exacting standards to ensure reliable rotational balance and clearance for performance brake systems.

• Manufacturer Part Number: F22290062P30
• Model: Forgestar CF5V
• Size: 19x10
• Bolt Pattern: 5x120.65
• Offset: ET30
• Backspacing: 6.7in
• Finish: Satin Black

The Forgestar CF10 series wheel offers a sophisticated 10-spoke design engineered for performance-oriented drivers. Utilizing a specialized rotary forging process, this flow-formed wheel provides a superior strength-to-weight ratio compared to traditional cast wheels. This construction reduces unsprung mass, improving acceleration, braking, and handling characteristics on both the street and the track.

• Model: Forgestar CF10
• Size: 20x12
• Bolt Pattern: 5x120.65
• Offset: +50mm (ET50)
• Backspacing: 8.5in
• Finish: Gloss Black
• Construction: Rotary Forged / Flow Formed
• Manufacturer Part Number: F20102062P50

The flow-forming process applies intense pressure to the inner barrel while the wheel is spinning, compressing the aluminum to create a dense grain structure. This ensures the wheel is durable enough to handle high-load cornering while remaining lightweight. The Gloss Black finish provides a deep, mirror-like shine that complements various vehicle aesthetics.

The Forgestar F14 Drag Series wheel is engineered specifically for competitive drag racing applications. This 15x10-inch wheel utilizes the classic F14 mesh design but is optimized for the structural demands and weight considerations required at the drag strip. The Satin Black finish provides a durable, sleek appearance that resists brake dust and track debris.

• Manufacturer Part Number: F372B0063P44
• Size: 15x10 inches
• Bolt Pattern: 5x120.65
• Offset: +44mm (ET44)
• Backspacing: 7.2 inches
• Finish: Satin Black

Built to accommodate drag radial or slick tires, this wheel provides the necessary clearance and strength for high-torque launches. It is designed to replace or upgrade factory wheels on specific drag-oriented setups requiring a deep 7.2-inch backspacing.

Upgrade your vehicle's stance and performance with the Forgestar X14 series wheel. This 22x10 wheel is engineered to provide a robust load rating suitable for modern trucks and SUVs while maintaining the lightweight construction standards Forgestar is known for. The multi-spoke X14 design is finished in a durable Satin Bronze that offers a custom look while resisting the rigors of daily driving.

• Manufacturer Part Number: F35520089P30
• Diameter: 22 inches
• Width: 10 inches
• Bolt Pattern: 6x135
• Offset: +30mm (ET30)
• Backspacing: 6.7 inches
• Finish: Satin Bronze

The Forgestar X14 series wheel is engineered for drivers who demand a balance of precision fitment and aggressive styling. This 22x10 wheel features a deep Gloss Black finish that provides a durable, high-end look capable of withstanding the rigors of daily driving and varied road conditions.

• Model: Forgestar X14
• Part Number: F35120089P30
• Size: 22x10
• Bolt Pattern: 6x135
• Offset: ET30 (+30mm)
• Backspacing: 6.7 inches
• Finish: Gloss Black

Built with technical precision, the X14 utilizes specific dimensions to ensure proper clearance and a flush stance on compatible hubs. The 6x135 bolt pattern and 6.7-inch backspacing are designed for exact application, offering a significant upgrade over factory wheels in both aesthetics and structural presence.

The Forgestar F14 Beadlock wheel is engineered for high-performance drag racing applications where traction is the top priority. By utilizing a functional beadlock ring, this wheel mechanically secures the tire bead to the rim, preventing tire slippage during hard launches and allowing for the lower tire pressures required on the strip.

Constructed using Forgestar’s rotary forged (flow-formed) process, the F14 Beadlock maintains a high strength-to-weight ratio to reduce unsprung mass without compromising the structural integrity needed for high-torque environments. The iconic split-spoke design is finished in a durable Satin Black, providing a professional, aggressive look that clears many performance brake setups.

• Series: Forgestar F14 Beadlock
• Part Number: F28270067P50
• Size: 17x10 inches
• Bolt Pattern: 5x114.3
• Offset: +50mm (ET50)
• Backspacing: 7.5 inches
• Finish: Satin Black
• Included: Functional beadlock ring and hardware

The Forgestar F14 wheel (MPN: F27370067P50) combines a classic mesh aesthetic with performance-oriented engineering. This 17x10 wheel is finished in a premium Gloss Anthracite, providing a durable and sleek look that resists the rigors of spirited driving. Designed with a +50mm offset and 7.5-inch backspacing, it offers a specific fitment profile for vehicles utilizing the 5x114.3 bolt pattern.

• Series: Forgestar F14
• Diameter: 17 inches
• Width: 10 inches
• Bolt Pattern: 5x114.3
• Offset: ET50
• Backspacing: 7.5 inches
• Finish: Gloss Anthracite
• Part Number: F27370067P50

The Forgestar F14 is a high-performance rotary forged wheel that utilizes flow-forming technology to achieve a strength-to-weight ratio comparable to traditional forged wheels. This iconic mesh-style wheel is designed to reduce unsprung mass, improving both handling and acceleration on the street or track.

This 17x10 variation features a Gloss Anthracite finish for a durable, sleek aesthetic. With an ET44 offset and 7.2-inch backspacing, it provides specific clearance for performance braking systems and suspension components. As a rotary forged wheel, the F14 offers the structural integrity required for high-load applications while maintaining a lightweight profile.

• Manufacturer Part Number: F27370022P44
• Diameter: 17"
• Width: 10"
• Bolt Pattern: 5x120
• Offset: ET44
• Backspacing: 7.2in
• Finish: Gloss Anthracite
• Construction: Rotary Forged / Flow Formed

The Forgestar F14 is a high-performance rotary forged wheel engineered for drivers who demand a balance of strength and weight reduction. This F14 series wheel features a timeless mesh design that optimizes load distribution while clearing large brake calipers, making it an ideal choice for both track performance and aggressive street fitment.

• Model: F14
• Size: 17x10
• Bolt Pattern: 5x114.3
• Offset: ET50
• Backspacing: 7.5in
• Finish: Satin Black
• Part Number: F27270067P50

Constructed with durability in mind, the Satin Black finish provides a stealthy, premium look that resists the rigors of performance driving. This wheel is sold individually and serves as a direct replacement or upgrade for vehicles requiring these specific dimensions and offsets.

The Forgestar F14 brings a timeless 14-spoke mesh design to your vehicle, engineered using rotary forged flow-forming technology. This manufacturing process results in a wheel that is significantly lighter than a traditional cast wheel while maintaining a high load rating and structural integrity for performance driving applications.

• Series: Forgestar F14
• Size: 17x10
• Bolt Pattern: 5x120
• Offset: +44mm (ET44)
• Backspacing: 7.2 inches
• Finish: Satin Black
• Manufacturer Part Number: F27270022P44

Finished in a durable Satin Black powder coat, this F14 wheel provides an aggressive aesthetic that resists brake dust and road debris. The 17x10 dimensions and ET44 offset are designed to provide a wide footprint for increased traction, making it a popular choice for enthusiasts focusing on fitment and handling dynamics.

The Forgestar F14 wheel features an iconic 14-spoke mesh design combined with flow-formed construction to deliver a high-strength, lightweight performance wheel. By utilizing a rotary forging process, Forgestar increases the structural integrity of the barrel, providing strength characteristics similar to a fully forged wheel while significantly reducing unsprung weight for better suspension response and handling.

Finished in a durable gloss black, this 19x12 wheel is engineered for enthusiasts who require a wide footprint and aggressive styling without sacrificing performance. The multi-spoke layout is specifically designed to provide ample clearance for large aftermarket brake kits while maintaining structural rigidity during high-load cornering.

• Series: Forgestar F14
• Size: 19x12
• Bolt Pattern: 5x120.65
• Offset: +50mm (ET50)
• Backspacing: 8.5in
• Finish: Gloss Black
• Construction: Flow Formed / Rotary Forged
• Manufacturer Part Number: F25192062P50

The Forgestar F14 is a high-performance rotary forged wheel featuring an iconic split seven-spoke mesh design. This 18x12-inch wheel is engineered to provide a superior balance of structural strength and weight reduction, making it an ideal choice for performance street and track applications requiring wide tire fitment.

Constructed using Forgestar's flow-forming process, the F14 barrel is compressed and shaped under heat and pressure, resulting in a grain structure that mimics a fully forged wheel. This process increases load capacity and impact resistance while minimizing unsprung weight. The Gloss Black finish provides a durable, deep luster that resists the elements and complements any vehicle profile.

• Series: F14
• Size: 18x12
• Bolt Pattern: 5x120.65mm (5x4.75")
• Offset: +50mm (ET50)
• Backspacing: 8.5 inches
• Finish: Gloss Black
• Construction: Rotary Forged / Flow Formed Aluminum
• Part Number: F25182062P50

The Forgestar F14 is a high-performance rotary forged wheel that combines a classic mesh design with modern manufacturing tolerances. This 18x11 wheel is engineered for strength and weight reduction, utilizing rotary forging to bridge the gap between traditional casting and expensive mono-block forging. The gloss black finish provides a sleek, durable aesthetic suitable for both track and street applications.

• Manufacturer Part Number: F25181162P55
• Diameter: 18 inches
• Width: 11 inches
• Bolt Pattern: 5x120.65
• Offset: +55mm (ET55)
• Backspacing: 8.2 inches
• Construction: Rotary Forged Flow Formed
• Finish: Gloss Black

The Forgestar CF10 is a performance-oriented 10-spoke wheel that utilizes rotary forged flow-forming technology to provide a high strength-to-weight ratio. This manufacturing process results in a wheel that is significantly lighter than a standard cast wheel, reducing unsprung mass for improved acceleration, braking, and suspension response.

• Manufacturer Part Number: F20190062P30
• Series: CF10
• Size: 19x10
• Bolt Pattern: 5x120.65
• Offset: ET30
• Backspacing: 6.7 inches
• Finish: Gloss Black
• Construction: Rotary Forged / Flow Formed

Engineered for both track and street applications, the CF10 features a classic concave profile and a durable Gloss Black finish. This wheel is designed to meet strict tolerances and provide a precise fitment for vehicles requiring a 5x120.65 bolt pattern and a +30mm offset.

The Forgestar F14 Drag series wheel is engineered specifically for the track, utilizing rotary forged flow-forming technology to achieve a high-strength barrel with significantly reduced unsprung weight. This 18x5.0 "skinny" front runner is designed to minimize rolling resistance and reduce rotational mass while maintaining the structural integrity required for high-speed passes. Its unique mesh design is optimized to provide maximum clearance for large aftermarket and factory big brake kits.

• Rotary forged flow-formed construction for superior strength-to-weight ratio
• Lightweight "skinny" profile reduces rolling resistance at the drag strip
• Engineered to clear most performance brake calipers
• Durable Satin Black finish for a stealthy, race-ready look
• Manufacturer Part Number: F1728C067N23

Specifications:

• Size: 18x5.0
• Bolt Pattern: 5x114.3
• Offset: -23mm (ET-23)
• Backspacing: 2.125 inches
• Finish: Satin Black

The Forgestar F14 Drag series wheel is engineered specifically for the track, utilizing a Rotary Forged flow-forming process to deliver the structural integrity of a forged wheel at a significantly lower weight. This 18x5.0 "front runner" skinny is designed to reduce rolling resistance and rotational mass on the front axle, helping to improve elapsed times while maintaining the strength needed for high-speed passes.

• Manufacturer Part Number: F1728C022N23
• Series: F14 Drag
• Size: 18x5.0
• Bolt Pattern: 5x120
• Offset: -23mm
• Backspacing: 2.125 in
• Finish: Satin Black
• Construction: Flow-Formed (Rotary Forged)

The F14 Drag features a classic 14-spoke mesh design that offers excellent brake caliper clearance and a durable satin black finish that stands up to the rigors of racing. This wheel is an essential component for drag racers looking to optimize their vehicle's performance and stance.

The Forgestar D5 Drag series wheel is a purpose-built front runner designed to reduce rotational mass and improve track performance. Engineered for drag racing applications, this lightweight 18x5.0 wheel helps minimize unsprung weight, allowing for quicker launches and improved front-end agility.

This wheel features a classic five-spoke design finished in a durable gloss black that maintains its appearance through the heat of the track. Built to handle the specific demands of drag racing, the D5 Drag provides the necessary clearance for many performance braking systems while maintaining strict tolerances for balance and structural integrity.

• Series: D5 Drag
• Size: 18x5.0
• Bolt Pattern: 5x115
• Offset: -37mm
• Backspacing: 1.5 in
• Finish: Gloss Black
• Manufacturer Part Number: F0918C071N37

The Forgestar D5 Drag 18x5.0 wheel is a purpose-built "skinny" front runner designed to minimize rolling resistance and rotational mass at the drag strip. Utilizing a rotary forged construction process, this wheel delivers the structural integrity required for high-performance track use while remaining significantly lighter than traditional cast alternatives. The aggressive gloss black finish and multi-spoke design provide a professional aesthetic for serious drag racing builds.

• Manufacturer Part Number: F0918C067N23
• Series: D5 Drag
• Wheel Diameter: 18in
• Wheel Width: 5.0in
• Bolt Pattern: 5x114.3
• Offset: -23mm
• Backspacing: 2.125in
• Finish: Gloss Black
• Construction: Rotary Forged