Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
101 products
101 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$2,965.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2021 | Ford | Bronco | First Edition |
| 2023-2024 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2024 | Ford | Bronco | Outer Banks |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$1,864.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable sp rings, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Porsche | 911 | Turbo |
| 2025 | Porsche | 911 | Turbo 50 Years |
| 2021-2025 | Porsche | 911 | Turbo S |
$1,704.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2023 | BMW | X5 | M |
| 2020,2024-2026 | BMW | X5 | M Competition |
| 2020-2023 | BMW | X6 | M |
| 2020-2021,2024-2026 | BMW | X6 | M Competition |
$914.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride h eight Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Audi | RS3 | Base |
$1,284.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2025 | Audi | Q5 | Premium |
| 2018-2025 | Audi | Q5 | Premium Plus |
| 2018-2025 | Audi | Q5 | Prestige |
| 2020 | Audi | Q5 | Titanium Premium |
| 2020 | Audi | Q5 | Titanium Premium Plus |
| 2020 | Audi | Q5 | Titanium Prestige |
| 2019-2025 | Audi | SQ5 | Premium |
| 2018-2025 | Audi | SQ5 | Premium Plus |
| 2018-2025 | Audi | SQ5 | Prestige |
$175.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
Product Overview QA1's rear drop kits are the perfect solution for lowering the rear suspension of your 2021-2025 Ford F150. Our fully bolt-in kits include powder-coated shackles, flip brackets, hangers, and QA1 Stocker Star shocks, ensuring hassle-free installation and superior ride quality. This rear drop kit offers a drop range of 3.5”-5.5” with ½ inch increment adjustments on 2WD trucks. 4X4 trucks will see an additional 1.5" of lowering in the rear. Achieve a sleek, sporty look for your truck, matched with an incredible ride quality. Double-Adjustable ShocksTake your F150's performance to the next level with QA1 double adjustable shocks. Perfect for both street and track use, double adjustable shocks are famous for their independent rebound and compression tunability, giving you exceptional handling and control for finer control over your suspension.Rear Flip Kit, Shackles and Hanger KitsQA1's Rear Flip Kit, Shackle and Hanger Kits are the ultimate solution for lowering the rear of your truck without compromising ride quality. Made from heavy-gauge steel with a powder-coated finish and top-notch hardware, our kits guarantee long-lasting performance in any driving conditions.Easy, Bolt-In InstallationOur commitment to thoughtful product design is evident in every fully bolt-in kit we produce, which guarantees a hassle-free installation process.Best In-Class Lifetime WarrantyRegister at QA1.net/warranty for lifetime coverage of your QA1 shocks.Made in the USAQA1 truck suspension is proudly made in Lakeville, Minnesota. Fitment NotesFits both 2wd and 4x4.4x4 drop range is 1 ½” more due to OE block removal.Not compatible with Power Boost models or Continuously Control Damping (CCD) suspension.
- Easy, bolt-in installation
- Adjustable shock valving
- Best-in-class warranty
- Quality components
- Made in the USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | King Ranch |
| 2021-2026 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2026 | Ford | F-150 | Platinum |
| 2021-2026 | Ford | F-150 | Police Responder |
| 2021-2026 | Ford | F-150 | Raptor |
| 2021-2026 | Ford | F-150 | SSV |
| 2024-2026 | Ford | F-150 | STX |
| 2021-2026 | Ford | F-150 | Tremor |
| 2021-2026 | Ford | F-150 | XL |
| 2021-2026 | Ford | F-150 | XLT |
Our 2/4 drop is a great way to lower and level out your vehicle without breaking the budget. This budget friendly kit comes with a 2-inch lowering coil springs and shocks for the front. We then drop the rear comes with a 5 inch flip kit and rear twin tube shocks for a better ride. What makes this kit great is you can always add or remove components to get the look you're after.
- Universal Application
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2009-2010 | Dodge | Ram 1500 | TRX |
| 2011-2024 | Ram | 1500 | Big Horn |
| 2012-2018 | Ram | 1500 | Express |
| 2014 | Ram | 1500 | HFE |
| 2011-2024 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2021 | Ram | 1500 | Laramie Longhorn |
| 2015-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2014-2024 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2011-2015 | Ram | 1500 | Outdoorsman |
| 2013 | Ram | 1500 | R/T |
| 2015-2024 | Ram | 1500 | Rebel |
| 2011-2018 | Ram | 1500 | SLT |
| 2017-2018 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2024 | Ram | 1500 | Tradesman |
| 2012 | Ram | 1500 | Tradesman HD |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2009-2010 | Dodge | Ram 1500 | TRX4 |
| 2011-2024 | Ram | 1500 | Big Horn |
| 2012-2018 | Ram | 1500 | Express |
| 2022-2023 | Ram | 1500 | HFE |
| 2011-2024 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2021 | Ram | 1500 | Laramie Longhorn |
| 2015-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2014-2024 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2011-2016 | Ram | 1500 | Outdoorsman |
| 2015-2024 | Ram | 1500 | Rebel |
| 2011-2018 | Ram | 1500 | SLT |
| 2014-2018 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2024 | Ram | 1500 | Tradesman |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2009-2010 | Dodge | Ram 1500 | TRX |
| 2011-2024 | Ram | 1500 | Big Horn |
| 2012-2018 | Ram | 1500 | Express |
| 2013-2024 | Ram | 1500 | HFE |
| 2011-2024 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2021 | Ram | 1500 | Laramie Longhorn |
| 2015-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2014-2024 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2011-2015 | Ram | 1500 | Outdoorsman |
| 2013 | Ram | 1500 | R/T |
| 2015-2024 | Ram | 1500 | Rebel |
| 2011-2018 | Ram | 1500 | SLT |
| 2017-2018 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2024 | Ram | 1500 | Tradesman |
| 2012 | Ram | 1500 | Tradesman HD |
| 2019 | Ram | 1500 Classic | Big Horn |
| 2019-2022 | Ram | 1500 Classic | Express |
| 2019 | Ram | 1500 Classic | Laramie |
| 2019 | Ram | 1500 Classic | Lone Star |
| 2019-2022 | Ram | 1500 Classic | SLT |
| 2019-2023 | Ram | 1500 Classic | Special Service |
| 2019-2024 | Ram | 1500 Classic | Tradesman |
| 2019-2024 | Ram | 1500 Classic | Warlock |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2009-2010 | Dodge | Ram 1500 | TRX |
| 2009-2010 | Dodge | Ram 1500 | TRX4 |
| 2011-2024 | Ram | 1500 | Big Horn |
| 2012-2018 | Ram | 1500 | Express |
| 2013-2024 | Ram | 1500 | HFE |
| 2011-2024 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2021 | Ram | 1500 | Laramie Longhorn |
| 2015-2024 | Ram | 1500 | Limited |
| 2021-2024 | Ram | 1500 | Limited Longhorn |
| 2014-2024 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2011-2016 | Ram | 1500 | Outdoorsman |
| 2013 | Ram | 1500 | R/T |
| 2015-2024 | Ram | 1500 | Rebel |
| 2011-2018 | Ram | 1500 | SLT |
| 2014-2018,2020-2021 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2024 | Ram | 1500 | Tradesman |
| 2012 | Ram | 1500 | Tradesman HD |
| 2019 | Ram | 1500 Classic | Big Horn |
| 2019-2022 | Ram | 1500 Classic | Express |
| 2019 | Ram | 1500 Classic | Laramie |
| 2019 | Ram | 1500 Classic | Lone Star |
| 2019-2022 | Ram | 1500 Classic | SLT |
| 2019-2023 | Ram | 1500 Classic | Special Service |
| 2019-2024 | Ram | 1500 Classic | Tradesman |
| 2019-2024 | Ram | 1500 Classic | Warlock |
MAX TRAC SUSPENSION'S PART# 202740 IS A 4" REAR LOWERING BOX KIT INCLUDING COILS, TRAC BAR BRACKET, SWAY BAR BRACKETS, & REAR SHOCKS
- Cutting Is Required On Straight Flip Kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2025 | Ram | 1500 | Big Horn |
| 2019-2024 | Ram | 1500 | HFE |
| 2019-2025 | Ram | 1500 | Laramie |
| 2019-2021 | Ram | 1500 | Laramie Longhorn |
| 2019-2025 | Ram | 1500 | Limited |
| 2021-2025 | Ram | 1500 | Limited Longhorn |
| 2019-2025 | Ram | 1500 | Lone Star |
| 2021 | Ram | 1500 | Longhorn |
| 2019-2025 | Ram | 1500 | Rebel |
| 2025 | Ram | 1500 | RHO |
| 2020-2021,2025 | Ram | 1500 | Special Service |
| 2019-2025 | Ram | 1500 | Tradesman |
| 2025 | Ram | 1500 | Tradesman HFE |
| 2025 | Ram | 1500 | Tungsten |
| 2025 | Ram | 1500 | Warlock |
| 2019 | Ram | 1500 Classic | Big Horn |
| 2019-2022 | Ram | 1500 Classic | Express |
| 2019 | Ram | 1500 Classic | Laramie |
| 2019 | Ram | 1500 Classic | Lone Star |
| 2019-2022 | Ram | 1500 Classic | SLT |
| 2019-2023 | Ram | 1500 Classic | Special Service |
| 2019-2024 | Ram | 1500 Classic | Tradesman |
| 2019-2024 | Ram | 1500 Classic | Warlock |
MAX TRAC SUSPENSION'S PART# 201640 IS A 4" REAR LOWERING BOX KIT INCLUDING COILS, SHOCK EXTENDERS & SENSOR RODS
- Cutting Is Required On Straight Flip Kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Cadillac | Escalade | Base |
| 2015-2020 | Cadillac | Escalade | Luxury |
| 2015-2020 | Cadillac | Escalade | Platinum |
| 2015-2016 | Cadillac | Escalade | Premium |
| 2017-2020 | Cadillac | Escalade | Premium Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Base |
| 2015-2020 | Cadillac | Escalade ESV | Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Platinum |
| 2015-2016 | Cadillac | Escalade ESV | Premium |
| 2017-2020 | Cadillac | Escalade ESV | Premium Luxury |
| 2015-2020 | Chevrolet | Suburban | LS |
| 2015-2020 | Chevrolet | Suburban | LT |
| 2015-2016 | Chevrolet | Suburban | LTZ |
| 2017-2020 | Chevrolet | Suburban | Premier |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LS |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LT |
| 2015-2020 | Chevrolet | Tahoe | LS |
| 2015-2020 | Chevrolet | Tahoe | LT |
| 2015-2016 | Chevrolet | Tahoe | LTZ |
| 2015-2020 | Chevrolet | Tahoe | PPV |
| 2017-2020 | Chevrolet | Tahoe | Premier |
| 2015-2020 | Chevrolet | Tahoe | SSV |
| 2015-2020 | GMC | Acadia | Denali |
| 2016-2020 | GMC | Acadia | SL |
| 2015-2020 | GMC | Acadia | SLE |
| 2015-2020 | GMC | Acadia | SLT |
| 2017 | GMC | Acadia Limited | Base |
| 2015-2020 | GMC | Terrain | Denali |
| 2015-2020 | GMC | Terrain | SL |
| 2015-2020 | GMC | Terrain | SLE |
| 2015-2020 | GMC | Terrain | SLT |
| 2015-2020 | GMC | Yukon | Denali |
| 2015-2020 | GMC | Yukon | SLE |
| 2015-2020 | GMC | Yukon | SLT |
| 2015-2020 | GMC | Yukon XL | Denali |
| 2015-2020 | GMC | Yukon XL | SLE |
| 2015-2020 | GMC | Yukon XL | SLT |
MAX TRAC SUSPENSION'S PART# 201630 IS A 3" REAR LOWERING BOX KIT INCLUDING COILS, SHOCK EXTENDERS & SENSOR RODS
- Cutting Is Required On Straight Flip Kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Cadillac | Escalade | Base |
| 2015-2020 | Cadillac | Escalade | Luxury |
| 2015-2020 | Cadillac | Escalade | Platinum |
| 2015-2016 | Cadillac | Escalade | Premium |
| 2017-2020 | Cadillac | Escalade | Premium Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Base |
| 2015-2020 | Cadillac | Escalade ESV | Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Platinum |
| 2015-2016 | Cadillac | Escalade ESV | Premium |
| 2017-2020 | Cadillac | Escalade ESV | Premium Luxury |
| 2015-2020 | Chevrolet | Suburban | LS |
| 2015-2020 | Chevrolet | Suburban | LT |
| 2015-2016 | Chevrolet | Suburban | LTZ |
| 2017-2020 | Chevrolet | Suburban | Premier |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LS |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LT |
| 2015-2020 | Chevrolet | Tahoe | LS |
| 2015-2020 | Chevrolet | Tahoe | LT |
| 2015-2016 | Chevrolet | Tahoe | LTZ |
| 2015-2020 | Chevrolet | Tahoe | PPV |
| 2017-2020 | Chevrolet | Tahoe | Premier |
| 2015-2020 | Chevrolet | Tahoe | SSV |
| 2015-2020 | GMC | Acadia | Denali |
| 2016-2020 | GMC | Acadia | SL |
| 2015-2020 | GMC | Acadia | SLE |
| 2015-2020 | GMC | Acadia | SLT |
| 2017 | GMC | Acadia Limited | Base |
| 2015-2020 | GMC | Terrain | Denali |
| 2015-2020 | GMC | Terrain | SL |
| 2015-2020 | GMC | Terrain | SLE |
| 2015-2020 | GMC | Terrain | SLT |
| 2015-2020 | GMC | Yukon | Denali |
| 2015-2020 | GMC | Yukon | SLE |
| 2015-2020 | GMC | Yukon | SLT |
| 2015-2020 | GMC | Yukon XL | Denali |
| 2015-2020 | GMC | Yukon XL | SLE |
| 2015-2020 | GMC | Yukon XL | SLT |
MAX TRAC SUSPENSION'S PART# 201620 IS A 2" REAR LOWERING BOX KIT INCLUDING COILS, SHOCK EXTENDERS & SENSOR RODS
- Cutting Is Required On Straight Flip Kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Cadillac | Escalade | Base |
| 2015-2020 | Cadillac | Escalade | Luxury |
| 2015-2020 | Cadillac | Escalade | Platinum |
| 2015-2016 | Cadillac | Escalade | Premium |
| 2017-2020 | Cadillac | Escalade | Premium Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Base |
| 2015-2020 | Cadillac | Escalade ESV | Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Platinum |
| 2015-2016 | Cadillac | Escalade ESV | Premium |
| 2017-2020 | Cadillac | Escalade ESV | Premium Luxury |
| 2015-2020 | Chevrolet | Suburban | LS |
| 2015-2020 | Chevrolet | Suburban | LT |
| 2015-2016 | Chevrolet | Suburban | LTZ |
| 2017-2020 | Chevrolet | Suburban | Premier |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LS |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LT |
| 2015-2020 | Chevrolet | Tahoe | LS |
| 2015-2020 | Chevrolet | Tahoe | LT |
| 2015-2016 | Chevrolet | Tahoe | LTZ |
| 2015-2020 | Chevrolet | Tahoe | PPV |
| 2017-2020 | Chevrolet | Tahoe | Premier |
| 2015-2020 | Chevrolet | Tahoe | SSV |
| 2015-2020 | GMC | Acadia | Denali |
| 2016-2020 | GMC | Acadia | SL |
| 2015-2020 | GMC | Acadia | SLE |
| 2015-2020 | GMC | Acadia | SLT |
| 2017 | GMC | Acadia Limited | Base |
| 2015-2020 | GMC | Terrain | Denali |
| 2015-2020 | GMC | Terrain | SL |
| 2015-2020 | GMC | Terrain | SLE |
| 2015-2020 | GMC | Terrain | SLT |
| 2015-2020 | GMC | Yukon | Denali |
| 2015-2020 | GMC | Yukon | SLE |
| 2015-2020 | GMC | Yukon | SLT |
| 2015-2020 | GMC | Yukon XL | Denali |
| 2015-2020 | GMC | Yukon XL | SLE |
| 2015-2020 | GMC | Yukon XL | SLT |
Lowering Kit Box; 4 in. Drop; Kit Incl. Rear Drop Springs; R. Shock Extenders; R. Air Ride Sensor Rods; All Necessary Hardware To Complete Installation; Superseded To PN[201040];
- Universal Application
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2020 | Cadillac | Escalade | Base |
| 2009-2013 | Cadillac | Escalade | Hybrid |
| 2010-2013 | Cadillac | Escalade | Hybrid Platinum |
| 2011-2020 | Cadillac | Escalade | Luxury |
| 2008-2020 | Cadillac | Escalade | Platinum |
| 2011-2016 | Cadillac | Escalade | Premium |
| 2017-2020 | Cadillac | Escalade | Premium Luxury |
| 2007-2020 | Cadillac | Escalade ESV | Base |
| 2011-2020 | Cadillac | Escalade ESV | Luxury |
| 2008-2020 | Cadillac | Escalade ESV | Platinum |
| 2011-2016 | Cadillac | Escalade ESV | Premium |
| 2017-2020 | Cadillac | Escalade ESV | Premium Luxury |
| 2007-2013 | Cadillac | Escalade EXT | Base |
| 2011-2013 | Cadillac | Escalade EXT | Luxury |
| 2011-2013 | Cadillac | Escalade EXT | Premium |
| 2015-2016 | Cadillac | SRX | Base |
| 2015-2016 | Cadillac | SRX | Luxury |
| 2015-2016 | Cadillac | SRX | Performance |
| 2015-2016 | Cadillac | SRX | Premium |
| 2019-2020 | Cadillac | XT4 | Luxury |
| 2019-2020 | Cadillac | XT4 | Premium Luxury |
| 2019-2020 | Cadillac | XT4 | Sport |
| 2017-2019 | Cadillac | XT5 | Base |
| 2017-2020 | Cadillac | XT5 | Luxury |
| 2017-2019 | Cadillac | XT5 | Platinum |
| 2017-2020 | Cadillac | XT5 | Premium Luxury |
| 2020 | Cadillac | XT5 | Sport |
| 2020 | Cadillac | XT6 | Premium Luxury |
| 2020 | Cadillac | XT6 | Sport |
| 2013 | Chevrolet | Avalanche | Black Diamond LS |
| 2013 | Chevrolet | Avalanche | Black Diamond LT |
| 2013 | Chevrolet | Avalanche | Black Diamond LTZ |
| 2007-2012 | Chevrolet | Avalanche | LS |
| 2007-2012 | Chevrolet | Avalanche | LT |
| 2007-2012 | Chevrolet | Avalanche | LTZ |
| 2015-2020 | Chevrolet | Suburban | LS |
| 2015-2020 | Chevrolet | Suburban | LT |
| 2015-2016 | Chevrolet | Suburban | LTZ |
| 2017-2020 | Chevrolet | Suburban | Premier |
| 2007-2014 | Chevrolet | Suburban 1500 | LS |
| 2007-2014 | Chevrolet | Suburban 1500 | LT |
| 2007-2014 | Chevrolet | Suburban 1500 | LTZ |
| 2007-2013 | Chevrolet | Suburban 2500 | LS |
| 2007-2013 | Chevrolet | Suburban 2500 | LT |
| 2007 | Chevrolet | Suburban 2500 | LTZ |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LS |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LT |
| 2008-2013 | Chevrolet | Tahoe | Hybrid |
| 2007-2020 | Chevrolet | Tahoe | LS |
| 2007-2020 | Chevrolet | Tahoe | LT |
| 2007-2016 | Chevrolet | Tahoe | LTZ |
| 2007-2020 | Chevrolet | Tahoe | PPV |
| 2017-2020 | Chevrolet | Tahoe | Premier |
| 2012-2020 | Chevrolet | Tahoe | SSV |
| 2007-2020 | GMC | Yukon | Denali |
| 2010-2013 | GMC | Yukon | Denali Hybrid |
| 2008-2013 | GMC | Yukon | Hybrid |
| 2007-2020 | GMC | Yukon | SLE |
| 2007-2020 | GMC | Yukon | SLT |
| 2015-2020 | GMC | Yukon XL | Denali |
| 2015-2020 | GMC | Yukon XL | SLE |
| 2015-2020 | GMC | Yukon XL | SLT |
| 2007-2014 | GMC | Yukon XL 1500 | Denali |
| 2007-2014 | GMC | Yukon XL 1500 | SLE |
| 2007-2014 | GMC | Yukon XL 1500 | SLT |
| 2007-2013 | GMC | Yukon XL 2500 | SLE |
| 2007-2013 | GMC | Yukon XL 2500 | SLT |
Lowering Kit Box; 2 in. Drop Kit; Incl. Rear Drop Coils; Rear Shock Extenders; Rear Air Ride Sensor Rods; All Necessary Hardware to Complete Installation;
- Powder Coated For A Long Life
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2020 | Cadillac | Escalade | Base |
| 2009-2013 | Cadillac | Escalade | Hybrid |
| 2010-2013 | Cadillac | Escalade | Hybrid Platinum |
| 2011-2020 | Cadillac | Escalade | Luxury |
| 2008-2020 | Cadillac | Escalade | Platinum |
| 2011-2016 | Cadillac | Escalade | Premium |
| 2017-2020 | Cadillac | Escalade | Premium Luxury |
| 2007-2020 | Cadillac | Escalade ESV | Base |
| 2011-2020 | Cadillac | Escalade ESV | Luxury |
| 2008-2020 | Cadillac | Escalade ESV | Platinum |
| 2011-2016 | Cadillac | Escalade ESV | Premium |
| 2017-2020 | Cadillac | Escalade ESV | Premium Luxury |
| 2007-2013 | Cadillac | Escalade EXT | Base |
| 2011-2013 | Cadillac | Escalade EXT | Luxury |
| 2011-2013 | Cadillac | Escalade EXT | Premium |
| 2015-2016 | Cadillac | SRX | Base |
| 2015-2016 | Cadillac | SRX | Luxury |
| 2015-2016 | Cadillac | SRX | Performance |
| 2015-2016 | Cadillac | SRX | Premium |
| 2019-2020 | Cadillac | XT4 | Luxury |
| 2019-2020 | Cadillac | XT4 | Premium Luxury |
| 2019-2020 | Cadillac | XT4 | Sport |
| 2017-2019 | Cadillac | XT5 | Base |
| 2017-2020 | Cadillac | XT5 | Luxury |
| 2017-2019 | Cadillac | XT5 | Platinum |
| 2017-2020 | Cadillac | XT5 | Premium Luxury |
| 2020 | Cadillac | XT5 | Sport |
| 2020 | Cadillac | XT6 | Premium Luxury |
| 2020 | Cadillac | XT6 | Sport |
| 2013 | Chevrolet | Avalanche | Black Diamond LS |
| 2013 | Chevrolet | Avalanche | Black Diamond LT |
| 2013 | Chevrolet | Avalanche | Black Diamond LTZ |
| 2007-2012 | Chevrolet | Avalanche | LS |
| 2007-2012 | Chevrolet | Avalanche | LT |
| 2007-2012 | Chevrolet | Avalanche | LTZ |
| 2015-2020 | Chevrolet | Suburban | LS |
| 2015-2020 | Chevrolet | Suburban | LT |
| 2015-2016 | Chevrolet | Suburban | LTZ |
| 2017-2020 | Chevrolet | Suburban | Premier |
| 2007-2014 | Chevrolet | Suburban 1500 | LS |
| 2007-2014 | Chevrolet | Suburban 1500 | LT |
| 2007-2014 | Chevrolet | Suburban 1500 | LTZ |
| 2007-2013 | Chevrolet | Suburban 2500 | LS |
| 2007-2013 | Chevrolet | Suburban 2500 | LT |
| 2007 | Chevrolet | Suburban 2500 | LTZ |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LS |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LT |
| 2008-2013 | Chevrolet | Tahoe | Hybrid |
| 2007-2020 | Chevrolet | Tahoe | LS |
| 2007-2020 | Chevrolet | Tahoe | LT |
| 2007-2016 | Chevrolet | Tahoe | LTZ |
| 2007-2020 | Chevrolet | Tahoe | PPV |
| 2017-2020 | Chevrolet | Tahoe | Premier |
| 2012-2020 | Chevrolet | Tahoe | SSV |
| 2007-2020 | GMC | Yukon | Denali |
| 2010-2013 | GMC | Yukon | Denali Hybrid |
| 2008-2013 | GMC | Yukon | Hybrid |
| 2007-2020 | GMC | Yukon | SLE |
| 2007-2020 | GMC | Yukon | SLT |
| 2015-2020 | GMC | Yukon XL | Denali |
| 2015-2020 | GMC | Yukon XL | SLE |
| 2015-2020 | GMC | Yukon XL | SLT |
| 2007-2014 | GMC | Yukon XL 1500 | Denali |
| 2007-2014 | GMC | Yukon XL 1500 | SLE |
| 2007-2014 | GMC | Yukon XL 1500 | SLT |
| 2007-2013 | GMC | Yukon XL 2500 | SLE |
| 2007-2013 | GMC | Yukon XL 2500 | SLT |
Lowering Kit Box; 2 in. Drop Kit; Incl. Rear Drop Coils; Rear Shock Extenders; Rear Air Ride Sensor Rods; All Necessary Hardware to Complete Installation;
- Powder Coated For A Long Life
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2000,2002-2006 | Cadillac | Escalade | Base |
| 2003-2006 | Cadillac | Escalade ESV | Base |
| 2002-2005 | Chevrolet | Avalanche 1500 | Base |
| 2005-2006 | Chevrolet | Avalanche 1500 | LS |
| 2005-2006 | Chevrolet | Avalanche 1500 | LT |
| 2002-2003 | Chevrolet | Avalanche 1500 | North Face |
| 2002-2003 | Chevrolet | Avalanche 1500 | On Road Edition |
| 2003 | Chevrolet | Avalanche 1500 | WBH |
| 2004-2006 | Chevrolet | Avalanche 1500 | Z66 |
| 2002-2006 | Chevrolet | Avalanche 1500 | Z71 |
| 2002-2004 | Chevrolet | Avalanche 2500 | Base |
| 2005-2006 | Chevrolet | Avalanche 2500 | LS |
| 2005-2006 | Chevrolet | Avalanche 2500 | LT |
| 2000-2001,2006 | Chevrolet | Suburban 1500 | Base |
| 2000-2006 | Chevrolet | Suburban 1500 | LS |
| 2000-2006 | Chevrolet | Suburban 1500 | LT |
| 2006 | Chevrolet | Suburban 1500 | LTZ |
| 2002-2006 | Chevrolet | Suburban 1500 | Z71 |
| 2000-2001 | Chevrolet | Suburban 2500 | Base |
| 2000-2006 | Chevrolet | Suburban 2500 | LS |
| 2000-2006 | Chevrolet | Suburban 2500 | LT |
| 2000-2001,2006 | Chevrolet | Tahoe | Base |
| 2000 | Chevrolet | Tahoe | Limited |
| 2000-2006,2015-2018 | Chevrolet | Tahoe | LS |
| 2000-2006,2015-2018 | Chevrolet | Tahoe | LT |
| 2015-2016 | Chevrolet | Tahoe | LTZ |
| 2015-2018 | Chevrolet | Tahoe | PPV |
| 2017-2018 | Chevrolet | Tahoe | Premier |
| 2015-2018 | Chevrolet | Tahoe | SSV |
| 2000,2002-2006 | Chevrolet | Tahoe | Z71 |
| 2000-2006,2015-2018 | GMC | Yukon | Denali |
| 2006 | GMC | Yukon | SL |
| 2000-2006,2015-2018 | GMC | Yukon | SLE |
| 2000-2006,2015-2018 | GMC | Yukon | SLT |
| 2015-2018 | GMC | Yukon XL | Denali |
| 2015-2018 | GMC | Yukon XL | SLE |
| 2015-2018 | GMC | Yukon XL | SLT |
| 2001-2006 | GMC | Yukon XL 1500 | Denali |
| 2006 | GMC | Yukon XL 1500 | SL |
| 2000-2006 | GMC | Yukon XL 1500 | SLE |
| 2000-2006 | GMC | Yukon XL 1500 | SLT |
| 2000-2006 | GMC | Yukon XL 2500 | SLE |
| 2000-2006 | GMC | Yukon XL 2500 | SLT |
$1,704.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020 | Nissan | GT-R | 50th Anniversary Edition |
| 2009-2010 | Nissan | GT-R | Base |
| 2012-2016 | Nissan | GT-R | Black Edition |
| 2009-2021,2023-2024 | Nissan | GT-R | Premium |
| 2018-2019 | Nissan | GT-R | Pure |
| 2024 | Nissan | GT-R | Skyline Edition |
| 2021,2024 | Nissan | GT-R | T-spec |
| 2024 | Nissan | GT-R | T-spec Takumi Edition |
| 2014-2015,2018-2020 | Nissan | GT-R | Track Edition |
$1,864.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Porsche | 911 | Carrera |
| 2020-2024 | Porsche | 911 | Carrera 4 |
| 2022-2025 | Porsche | 911 | Carrera 4 GTS |
| 2020-2024 | Porsche | 911 | Carrera 4S |
| 2022-2025 | Porsche | 911 | Carrera GTS |
| 2020-2024 | Porsche | 911 | Carrera S |
| 2023-2025 | Porsche | 911 | Carrera T |
| 2023 | Porsche | 911 | Edition 50 Years Porsche Design |
| 2023 | Porsche | 911 | Sport Classic |
| 2021-2024 | Porsche | 911 | Targa 4 |
| 2022-2025 | Porsche | 911 | Targa 4 GTS |
| 2021-2024 | Porsche | 911 | Targa 4S |
| 2021 | Porsche | 911 | Targa 4S Heritage Design Edition |
$1,864.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Porsche | 911 | Turbo |
| 2017-2019 | Porsche | 911 | Turbo S |
| 2018 | Porsche | 911 | Turbo S Exclusive Series |
$1,864.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014 | Porsche | 911 | 50th Anniversary Edition |
| 2012-2021 | Porsche | 911 | Carrera |
| 2012-2019 | Porsche | 911 | Carrera 4 |
| 2016 | Porsche | 911 | Carrera 4 Black Edition |
| 2012,2015-2016,2018-2019 | Porsche | 911 | Carrera 4 GTS |
| 2012-2020 | Porsche | 911 | Carrera 4S |
| 2016 | Porsche | 911 | Carrera Black Edition |
| 2012,2015-2016,2018-2019 | Porsche | 911 | Carrera GTS |
| 2012-2020 | Porsche | 911 | Carrera S |
| 2018-2019 | Porsche | 911 | Carrera T |
| 2012,2014-2019 | Porsche | 911 | Targa 4 |
| 2016,2018-2019 | Porsche | 911 | Targa 4 GTS |
| 2012,2014-2019 | Porsche | 911 | Targa 4S |
$1,864.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW su spension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020 | Aston Martin | Vantage | AMR |
| 2018-2023 | Aston Martin | Vantage | Base |
| 2021-2023 | Aston Martin | Vantage | F1 Edition |
$1,094.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a fa ctory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Dodge | Challenger | 392 Hemi Scat Pack Shaker |
| 2017-2023 | Dodge | Challenger | GT |
| 2011-2023 | Dodge | Challenger | R/T |
| 2017-2019 | Dodge | Challenger | R/T 392 |
| 2012 | Dodge | Challenger | R/T Classic |
| 2015-2016 | Dodge | Challenger | R/T Plus |
| 2016 | Dodge | Challenger | R/T Plus Shaker |
| 2016-2023 | Dodge | Challenger | R/T Scat Pack |
| 2021 | Dodge | Challenger | R/T Scat Pack Shaker Widebody |
| 2019-2023 | Dodge | Challenger | R/T Scat Pack Widebody |
| 2016 | Dodge | Challenger | R/T Shaker |
| 2014 | Dodge | Challenger | Rallye Redline |
| 2015 | Dodge | Challenger | Scat Pack |
| 2011 | Dodge | Challenger | SE |
| 2015-2018 | Dodge | Challenger | SRT 392 |
| 2011-2014 | Dodge | Challenger | SRT8 |
| 2012-2023 | Dodge | Challenger | SXT |
| 2012,2015-2018 | Dodge | Challenger | SXT Plus |
| 2017-2018 | Dodge | Challenger | T/A |
| 2017-2018 | Dodge | Challenger | T/A 392 |
| 2021 | Dodge | Challenger | T/A 392 Widebody |
| 2017-2018 | Dodge | Charger | Daytona |
| 2017-2018 | Dodge | Charger | Daytona 392 |
| 2018-2023 | Dodge | Charger | GT |
| 2011-2023 | Dodge | Charger | Pursuit |
| 2011-2023 | Dodge | Charger | R/T |
| 2017-2018 | Dodge | Charger | R/T 392 |
| 2015-2016 | Dodge | Charger | R/T Road & Track |
| 2015-2018 | Dodge | Charger | R/T Scat Pack |
| 2019-2023 | Dodge | Charger | Scat Pack |
| 2020 | Dodge | Charger | Scat Pack 392 Widebody |
| 2022 | Dodge | Charger | Scat Pack Widebody |
| 2011-2017 | Dodge | Charger | SE |
| 2015-2018 | Dodge | Charger | SRT 392 |
| 2012-2014 | Dodge | Charger | SRT8 |
| 2012-2023 | Dodge | Charger | SXT |
| 2012,2018 | Dodge | Charger | SXT Plus |
| 2018 | Dodge | Charger | SXT Plus Leather |
$1,354.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Mercedes-Benz | C63 AMG | Base |
| 2017-2021 | Mercedes-Benz | C63 AMG S | Base |
$1,864.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high- quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Mercedes-Benz | AMG GT | Base |
| 2018-2021 | Mercedes-Benz | AMG GT C | Base |
| 2016-2019 | Mercedes-Benz | AMG GT S | Base |
$1,354.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014 | Mercedes-Benz | CLS63 AMG | 4Matic |
| 2014-2018 | Mercedes-Benz | CLS63 AMG S | 4Matic |
| 2014-2015 | Mercedes-Benz | E63 AMG | 4Matic |
| 2014-2016 | Mercedes-Benz | E63 AMG S | 4Matic |
$1,864.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Mercedes-Benz | AMG GT 43 | Base |
| 2019-2024 | Mercedes-Benz | AMG GT 53 | Base |
$1,284.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with all KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2025 | BMW | M2 | Base |
| 2021-2025 | BMW | M3 | Base |
| 2021-2025 | BMW | M3 | Competition |
| 2022-2025 | BMW | M3 | Competition xDrive |
| 2024 | BMW | M3 | CS |
| 2021-2026 | BMW | M4 | Base |
| 2021-2026 | BMW | M4 | Competition |
| 2022-2026 | BMW | M4 | Competition xDrive |
$1,704.00
KW (H.A.S) Height Adjustable Spring kits are a great alternative to conventional lowering springs. You are no longer stuck with a fixed lowering height. KW H.A.S. systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle not only gets a more dynamic look, but also the steering behavior and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with our vehicle specific spring set up. KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high quality materials and the included KW ride height Adjustment - mechanisms, our KW H.A.S. kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris. Similar to a coilover suspension, the KW H.A.S kit allow a continuous adjustable ride height within a tested range, something not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery, when applicable, are always adjusted to the maximum technically possible lowering, typically limited by the factory dampers. With KW height adjustable springs, a sporty and harmonious driving behavior can be achieved without the driving dynamics of performance-oriented vehicles suffering. As with a ll KW suspension products our engineers develop vehicle specific parameters and spring specifications which undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center.
Installation InstructionsInstallation Instructions
Installation Instructions
- Sporty and improved driving behavior is achieved without the driving dynamics of performance-oriented vehicles suffering thanks to our vehicle specific spring rates that are tuned to work with your factory dampers.
- High-strength springs made of multi coated chrome-silicon steel for a long life and is tuned specifically for each vehicle. Application specific high-quality elastomer bump stops also included when applicable.
- Seamless Ride Height Adjustment - Unlike traditional lowering springs you can adjust each corner with millimeter precision.
- Maintains complete functionality of factory electronic suspension systems
- Available for vehicles with or without electronic suspension.
- Limited Lifetime Warranty - Unlimited Mileage
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020 | BMW | M8 | Base |
| 2020,2022-2025 | BMW | M8 | Competition |
| 2020-2021 | BMW | M8 Gran Coupe | Base |
| 2020-2025 | BMW | M8 Gran Coupe | Competition |
Showing 30/101
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.