Fits select 2002-2025 Dodge Ram 1500, 2500, and 3500 trucks with an 8ft bed, including Ram 1500 Classic models.

The BAKFlip MX4 TS (Track System) combines the premium security of a heavy-duty hard-folding cover with the ultimate versatility of integrated T-slot channels. These specialized bed rails allow you to mount aftermarket crossbars and rack systems directly to the cover, enabling you to haul gear above the bed while keeping your cargo protected below. The aluminum panels feature a high-end matte black automotive coating that is UV-resistant, scratch-resistant, and engineered to support up to 400 lbs. of evenly distributed weight.

• Integrated T-slot rails compatible with various rack systems and cargo accessories
• Heavy-duty aluminum construction with a premium matte black impact-resistant finish
• Full bed access with integrated prop rods and rubber bumpers to protect the cab
• Dual-action tailgate seal allows for closing the tailgate with the cover open or shut
• Weather-tight design with durable rubber seals and molded end caps
• Simple clamp-on installation with minimal drilling for drainage tubes on select models
• Manufacturer Part Number: 449204TS
• 5-Year Limited Warranty

Fits select 2020-2026 Chevrolet Silverado 2500/3500 HD and GMC Sierra 2500/3500 HD with the 8.2ft long bed.

The BAKFlip MX4 TS (Manufacturer Part Number 449134TS) combines the proven durability of a heavy-duty hard-folding cover with integrated T-slot channels. These built-in rails allow you to mount aftermarket crossbars and racks directly to your bed caps without sacrificing bed security. Engineered from high-strength aluminum panels with a matte black specialty automotive coating, the MX4 TS is designed to resist dents, scratches, and UV fading while supporting up to 400 lbs of evenly distributed weight.

This low-profile cover sits flush with your truck's bed caps and provides total bed access in seconds. Simply fold the panels forward toward the cab and secure them with the integrated prop rods and premium rubber bumpers. The latch system allows for easy operation from either side of the truck, while the EPDM rubber seals and integrated drainage tubes keep moisture away from your cargo.

• Heavy-duty aluminum construction with matte black UV-resistant finish
• Integrated T-slot channels for easy rack and accessory mounting
• Supports up to 400 lbs of evenly distributed weight
• Folds forward for 100% bed access without blocking the third brake light
• Integrated drainage system routes water away from the bed
• Durable rubber seals and molded end caps for weather protection
• Leaves bed stake pockets open for additional accessories
• Five-year limited warranty
• Manufacturer Part Number: 449134TS

Fits 2017-2024 Honda Ridgeline models equipped with the 5ft 4in bed.

The BAKFlip MX4 hard folding tonneau cover provides secure bed protection with a sleek, low-profile appearance. Built with heavy-duty aluminum panels, the MX4 features a premium matte-black finish designed to resist UV damage and scratches. This model includes the EZ-Lift system, which utilizes an integrated torsion spring to reduce the effective weight of the cover during operation, allowing for easier opening and closing without sacrificing panel strength.

• Hard folding design allows for 100% bed access and full rear-window visibility when open
• Heavy-duty aluminum construction with a durable matte-black finish
• Integrated EZ-Lift technology for effortless operation
• Flush-mount profile sits inside the bed rails for a clean, aerodynamic look
• Dual-action tailgate seal allows the tailgate to be closed regardless of the cover position

Fits 2022-2024 Nissan Frontier models equipped with a 5ft (60-inch) bed.

The BAKFlip MX4 sets the standard for hard folding truck bed covers, providing heavy-duty security and a sleek, low-profile appearance. Constructed from premium aircraft-grade aluminum panels with a scratch-resistant matte black finish, this cover protects your cargo from theft and harsh weather conditions. The flush-mount design sits inside the bed rails, maintaining the clean lines of your truck while allowing full access to the stake pocket holes.

This updated MX4 model features the EZ-Lift system, which incorporates an integrated torsion spring to reduce the effective weight of the cover panels during operation, making it significantly easier to open and close. For maximum utility, the cover folds all the way forward and secures with integrated struts, giving you 100% bed access without having to remove the tonneau. The dual-action tailgate seal allows you to close the tailgate regardless of whether the cover is open or shut.

• Heavy-duty aluminum panels with premium matte-black powder coat
• Integrated EZ-Lift torsion system for effortless panel operation
• Supports up to 400 lbs of evenly distributed weight
• Full bed access with integrated buckle and strut system
• Dual-action tailgate seal for convenient one-handed operation
• No-drill, clamp-on installation using basic hand tools
• Manufacturer Part Number: 448532

Fits 2024-2025 Ford Ranger models with a 5ft bed.

The BAKFlip MX4 EZ-Lift provides a secure, low-profile solution for protecting your cargo while maintaining full utility of your truck bed. Constructed from heavy-duty aluminum panels with a scratch-resistant matte black finish, this hard folding cover is built for long-term durability and weather resistance. The integrated EZ-Lift system utilizes assisted opening technology to significantly reduce the effort required to fold the cover back, making bed access faster and more convenient.

• Durable aluminum construction with a premium matte black powder-coat finish
• EZ-Lift system provides assisted opening for effortless operation
• Three-panel folding design allows for partial or 100% bed access
• Secures in the upright position against the cab for hauling large items
• Dual-action tailgate seal allows the tailgate to close with the cover open or shut
• Integrated buckle system to secure the cover in the open position while driving

Fits 2022-2026 Toyota Tundra models equipped with the 5' 5" bed.

The BAKFlip MX4 EZ-Lift provides premium security and weather protection while significantly reducing the effort required to access your cargo. This hard folding tonneau cover features an integrated torsion spring system that counterbalances the weight of the panels, making it easy to open and close even when your hands are full. Constructed from heavy-duty aluminum with a scratch-resistant matte black finish, the MX4 is designed to withstand the elements and support up to 400 lbs of evenly distributed weight.

• Integrated EZ-Lift torsion springs make opening the panels nearly effortless
• Heavy-duty aluminum panels with a premium matte black powder-coated finish for UV and scratch resistance
• Dual-action tailgate seal allows the tailgate to close regardless of the cover's position
• Provides 100% bed access when folded upright against the cab with secure prop rods
• No-drill, clamp-on installation utilizes the factory bed rails for a precise fit
• Low-profile design sits flush with the bed caps for improved aerodynamics and a clean aesthetic

Fits 2016-2023 Toyota Tacoma models with a 5'1" (60.5") bed and the factory utility track system.

The BAKFlip MX4 sets the standard for hard folding truck bed covers, combining heavy-duty aluminum construction with a sleek, low-profile matte finish. This updated model features the EZ-Lift system, which uses integrated struts to reduce the weight of the cover by up to 50% when opening, making full bed access easier than ever. The scratch-resistant aluminum panels are rated to support up to 400 lbs of evenly distributed weight while protecting your cargo from the elements.

Engineered for versatility, the MX4 allows for 100% bed access by folding upright against the cab, secured by prop rods. A dual-action tailgate seal means you can close the tailgate with the cover open or shut, providing a superior weather seal without the need to lift the rear panel first.

• Premium matte-black finish resists UV rays, scratches, and fingerprints
• EZ-Lift assist system makes opening the cover effortless
• Dual-action tailgate seal for convenient opening and closing
• Supports up to 400 lbs of evenly distributed weight
• No-drill installation utilizes factory track system mounting points
• Durable aluminum panels with a low-profile flush-mount design

Fits 2017-2025 Nissan Titan models equipped with a 5' 7" bed.

The BAKFlip MX4 with EZ-Lift provides heavy-duty security and a sleek, low-profile appearance for your Nissan Titan. This hard-folding tonneau cover is constructed with durable aluminum panels featuring a premium matte-black finish that resists scratches, UV damage, and fingerprints. The integrated EZ-Lift system utilizes a torsion spring to reduce the effort required when opening the panels, making bed access significantly easier than traditional folding covers.

Designed for maximum utility, the MX4 allows for full bed access by folding forward against the cab with integrated struts to hold it securely in place while driving. Its flush-mount design ensures a streamlined look that doesn't obstruct the third brake light.

• Heavy-duty aluminum panels with a scratch-resistant matte finish
• EZ-Lift assist system for effortless panel operation
• Full bed access without removing the cover
• Low-profile, flush-mount design sits inside the bed rails
• Simple clamp-on installation with no drilling required
• Enhanced weather resistance with EPDM seals

Fits 2019-2023 Ford Ranger models equipped with the 5' 1" bed.

The BAK BAKFlip MX4 EZ-Lift provides heavy-duty security and weather protection while solving the common struggle of heavy tonneau panels. This hard folding cover features aircraft-grade aluminum panels finished in a resilient, UV-resistant matte-black powder coat. The integrated EZ-Lift system utilizes a hidden torsion spring to offset the weight of the panels, making it significantly easier to open and close with one hand. Designed for a low-profile, flush-mount fit, it allows for full bed access without removing the cover, using integrated prop rods to secure the panels against the cab.

• EZ-Lift torsion spring technology reduces panel weight for effortless operation
• Heavy-duty aluminum construction with a scratch-resistant matte finish
• Supports up to 400 lbs of evenly distributed weight when closed
• Dual-action tailgate seal allows the tailgate to close regardless of cover position
• Integrated prop rods for secure driving with the cover in the fully open position
• Clamp-on, no-drill installation to factory bed rails

Fits 2026 Ford Ranger models equipped with a 5ft bed.

The BAKFlip MX4 is the premier hard folding truck bed cover, engineered to protect your cargo while maintaining full access to your 2026 Ford Ranger's bed. This model features the integrated EZ-Lift system, which significantly reduces the effort required to fold the heavy-duty panels open, making it easier than ever to access your gear. Constructed from aircraft-grade aluminum panels with a premium matte-black finish, the MX4 provides superior UV and scratch resistance while maintaining a sleek, low-profile appearance.

• Heavy-duty aluminum construction with a premium matte-black finish
• EZ-Lift system for effortless operation and opening
• Full bed access with integrated prop rods and rail bumpers
• Secure latching mechanism allows for operation with the tailgate open or closed
• Advanced weather-resistant seals protect cargo from dust and moisture
• Low-profile design sits flush with the bed rails for a clean look

Fits 2020-2025 Jeep Gladiator models equipped with a 5ft bed.

The BAKFlip MX4 EZ-Lift takes the industry-standard hard folding cover and adds an integrated torsion spring system, making the heavy-duty aluminum panels feel significantly lighter during operation. This cover provides secure, low-profile protection for your cargo while maintaining the ability to access 100% of your bed in seconds. The matte black finish is designed to resist UV damage, scratches, and fingerprints, ensuring a clean look that matches the Jeep OE trim.

• Heavy-duty aluminum panels with a premium matte black powder-coated finish
• Integrated EZ-Lift torsion spring reduces the effort required to fold and operate the cover
• Dual-action tailgate seal allows the tailgate to close regardless of the cover position
• Enhanced latch housing components for long-term durability and security
• EPDM outer seals provide superior weather resistance in harsh conditions
• Supports up to 400 lbs of evenly distributed weight
• No-drill installation using heavy-duty clamps

Fits 2024-2026 Toyota Tacoma models equipped with a 5ft bed.

The BAKFlip MX4 EZ-Lift provides premium bed protection with a sleek, flush-mount appearance. Engineered with heavy-duty, aircraft-grade aluminum panels and a scratch-resistant matte black finish, this hard folding cover is built for long-term durability. The integrated EZ-Lift system utilizes gas-charged struts to assist in opening the cover, significantly reducing the physical effort required to access your cargo and providing a lighter feel during operation.

• Integrated EZ-Lift gas struts for effortless opening and closing
• Heavy-duty aluminum panels with a premium matte black powder-coat finish
• Three-fold design allows for 100% bed access without removing the cover
• Rated to support up to 400 lbs of evenly distributed weight
• Enhanced latch housing components and all-weather seals for superior climate protection
• Dual-action tailgate seal allows the tailgate to close regardless of the cover position
• Clamp-on installation with no drilling required

Fits 2021-2026 Ford Maverick with the 4ft 5in bed.

The BAKFlip MX4 with EZ-Lift provides premium security and weather protection for your Maverick's cargo without sacrificing ease of use. This hard folding tonneau cover features heavy-duty aluminum panels finished in a durable, scratch-resistant matte black powder coat. The integrated EZ-Lift system utilizes a torsion spring to assist with opening, effectively reducing the lifting weight of the cover for effortless operation.

Designed for full bed utility, the MX4 can be folded up to the cab for 100% bed access, providing a clear view of the third brake light and protecting the rear window. Its low-profile design sits flush with the bed rails, while the upgraded latch housing components and weather seals offer enhanced durability against the elements.

• Heavy-duty aluminum panels with premium matte black finish
• EZ-Lift assist system reduces cover weight during operation
• Dual-action tailgate seal for closing the tailgate with the cover open or closed
• Folds against the cab for full bed access and payload protection
• No-drill clamp-on installation for a precise fit
• Rated for up to 400 lbs of evenly distributed weight

Fits 2007-2021 Toyota Tundra models equipped with the 5' 7" bed.

The BAK BAKFlip MX4 with EZ-Lift provides a heavy-duty solution for truck bed security and weather protection without sacrificing utility. This hard folding cover features high-strength aluminum panels with a premium matte-black finish designed to resist UV damage, scratches, and fingerprints. The integrated EZ-Lift system utilizes a torsion spring to reduce the perceived weight of the cover panels, making it significantly easier to fold the cover open or closed for daily use.

• Heavy-duty aluminum panels with a premium matte-black finish
• Integrated EZ-Lift technology for effortless panel operation
• Dual-action tailgate seal allows the tailgate to close with the cover open or shut
• Provides 100% bed access when folded up against the cab with integrated bumpers
• Low-profile design sits flush inside the bed rails
• Secure buckle system holds the cover in place when driving in the open position
• Clamp-on installation with no drilling required

Fits 2015-2022 Chevrolet Colorado and GMC Canyon models equipped with a 5' 2" bed.

The BAKFlip MX4 is a premium hard-folding tonneau cover engineered for maximum utility and sleek styling. Constructed from heavy-duty aluminum panels with a scratch-resistant matte-black finish, this cover is built to withstand harsh weather while supporting up to 400 lbs of evenly distributed weight. This model features the EZ-Lift system, utilizing an integrated torsion spring to significantly reduce the weight of the panels during operation, making bed access effortless.

Designed for full versatility, the MX4 provides 100% bed access by folding upright against the cab, secured by integrated prop rods. The dual-action tailgate seal allows the tailgate to be closed whether the cover is open or shut, while the no-drill clamp-on installation ensures a precise fit to the factory bed rails without permanent modification.

• Heavy-duty aluminum panels with UV and scratch-resistant matte finish
• EZ-Lift system reduces panel weight for easier opening and closing
• Provides 100% bed access without removing the cover
• Dual-action tailgate seal for simplified operation
• 400 lb. distributed weight capacity
• No-drill installation with basic hand tools

Protect your cargo with the BAK BAKFlip MX4 EZ-Lift, designed specifically for the 2019-2026 Chevrolet Silverado and GMC Sierra 1500 equipped with a 5' 10" bed. This heavy-duty hard folding cover features aircraft-grade aluminum panels finished in a premium matte black powder coat for superior UV and scratch resistance. The EZ-Lift system integrates a torsion spring mechanism that significantly reduces the weight of the cover during operation, making it easier to fold and stack against the cab for full bed access.

• Fits 2019-2026 Chevrolet Silverado and GMC Sierra 1500 with 5' 10" bed
• BAKFlip MX4 EZ-Lift series with integrated lift-assist technology
• Heavy-duty aluminum panels with a durable matte black finish
• Low-profile design sits flush with the bed rails for a clean OE look
• Dual-action tailgate seal allows the tailgate to close regardless of cover position
• No-drill installation using clamp-on rails for a secure fit
• Rated to support up to 400 lbs of evenly distributed weight

Fits 2004-2014 Ford F-150 models equipped with the 5' 6" bed.

The BAK BAKFlip MX4 EZ-Lift provides a premium hard-folding solution for your F-150, combining heavy-duty security with a sleek, low-profile matte finish. This updated EZ-Lift version features an enhanced hinge system and refined seals for effortless operation and superior weather protection.

• Matte Finish Aluminum: Features aircraft-grade aluminum panels with a scratch-resistant, matte black powder-coat finish that stays cool to the touch.
• EZ-Lift Operation: Engineered with a specialized hinge design that makes opening and closing the cover significantly lighter and easier than standard folding covers.
• Full Bed Access: Folds completely against the cab with integrated prop rods, allowing you to haul large items without removing the cover.
• Secure Latching: Automatic latching panels secure your cargo as they are folded down; locking the tailgate ensures the bed is fully protected.
• Weather Protection: Utilizes EPDM outer seals and a built-in drainage system with tubes to channel water away from the truck bed.

Fits 2014-2019 Chevrolet Silverado and GMC Sierra 1500 models equipped with a 5ft 9in bed.

The BAK BAKFlip MX4 EZ-Lift provides a rugged, secure, and low-profile solution for protecting your truck bed. This hard folding cover features heavy-duty aluminum panels with a premium matte-black finish that resists UV damage, scratches, and fingerprints. The EZ-Lift system incorporates an internal torsion spring that significantly reduces the effort required to fold the panels, ensuring smooth operation when accessing your gear.

• Heavy-duty aluminum construction with a scratch-resistant matte finish
• EZ-Lift torsion spring system for effortless opening and closing
• Provides 100% bed access by folding upright against the cab
• Integrated outer rail seals and drainage tubes for superior weather protection
• Dual-action tailgate seal allows for closing the tailgate regardless of the cover position
• No-drill installation using vehicle-specific mounting clamps
• Low-profile design sits flush with the bed rails for a clean OE look

Fits 2009-2023 RAM 1500, 2500, and 3500 models equipped with a 5' 7" bed and without the Ram Box cargo management system.

The BAK BAKFlip MX4 EZ-Lift is a premium hard folding tonneau cover engineered for maximum durability and ease of use. This model features heavy-duty aluminum panels with a scratch-resistant, matte black powder-coat finish that stays cool to the touch and resists UV fading. The integrated EZ-Lift system utilizes a torsion spring assist to significantly reduce the weight of the panels during operation, allowing for effortless opening and closing compared to standard folding covers.

Designed for full bed utility, the MX4 allows for 100% bed access by folding upright against the cab, where it is secured by integrated prop rods. The low-profile design sits flush with the bed rails for a clean, aerodynamic look, while the dual-action tailgate seal allows you to close the tailgate regardless of whether the cover is open or shut.

• Heavy-duty aluminum construction with premium matte black finish
• EZ-Lift torsion spring assist for effortless panel operation
• Flush-mount, low-profile design for a streamlined appearance
• Provides 100% bed access without requiring cover removal
• Drill-free installation using clamp-on bed rails
• Dual-action tailgate seal for convenient cargo access

Fits 2015-2020 Ford F-150 models equipped with a 5' 7" bed.

The BAKFlip MX4 provides a high-strength, secure cargo solution for your F-150. This hard folding tonneau cover features the EZ-Lift system, which uses integrated components to reduce the weight of the panels during operation, making bed access easier and more ergonomic. Constructed from heavy-duty aluminum with a matte-black finish, the MX4 is built to resist UV damage, scratches, and daily wear while maintaining a low-profile, flush-mount appearance.

• Specifically designed for the 5' 7" Ford F-150 bed (2015-2020)
• BAKFlip MX4 series matte-finish aluminum panels
• EZ-Lift assist technology for effortless folding
• Flush-mount design for a clean, low-profile look
• Full bed access with the cover folded against the cab
• Drill-free installation using heavy-duty clamps

Fits 2023-2026 Chevrolet Colorado and GMC Canyon with the 5' 2" (62 inch) bed.

The BAKFlip MX4 EZ-Lift sets a high standard for hard folding truck bed covers by combining heavy-duty security with effortless accessibility. This cover features high-strength aluminum panels with a premium matte finish that resists UV damage, scratches, and fingerprints. The integrated EZ-Lift system utilizes a torsion spring mechanism to significantly reduce the effort required to operate the panels, making it easy to open and close the cover with one hand.

Designed for maximum utility, the MX4 provides 100% bed access when folded up against the cab, secured by integrated struts. The enhanced tailgate seal design allows you to close the tailgate regardless of whether the cover is open or shut, providing a seamless workflow. Installation is straightforward with a clamp-on system that requires no drilling into the factory bed rails.

• Series: BAKFlip MX4
• Feature: EZ-Lift Torsion Spring System
• Bed Length: 5ft 2in (62")
• Material: Heavy-duty aluminum panels
• Finish: Matte black powder coat
• Installation: Bolt-on clamps, no drilling required
• Tailgate Operation: Dual-action seal for universal operation

Fits 2021-2025 Ford F-150 XL, XLT, Lariat, King Ranch, Platinum, SSV, and STX models with a 6.5ft bed.

The BAKFlip MX4 TS (Track System) combines the security and durability of the industry-leading MX4 hard-folding cover with integrated T-slot channels for ultimate cargo versatility. This heavy-duty aluminum cover features a matte black automotive-grade finish designed to resist UV damage, scratches, and dents while maintaining a clean, low-profile appearance. The integrated T-slot rails allow for the seamless addition of aftermarket racks, crossbars, and cargo baskets without interfering with cover operation.

Engineered for real-world utility, the MX4 TS supports up to 400 lbs of evenly distributed weight. It provides full bed access in seconds; simply fold the panels toward the cab and secure them with the included heavy-duty prop rods and premium rubber bumpers. The dual-action tailgate seal allows the tailgate to be closed whether the cover is open or shut, while the integrated drainage system keeps your gear dry in inclement weather.

• Heavy-duty aluminum construction with matte black UV-resistant finish
• Integrated T-slot channels in the bed rails for rack and accessory compatibility
• Supports up to 400 lbs of evenly distributed weight
• Full bed access with secure prop rods and cab protection
• Advanced weather resistance with EPDM rubber seals and integrated drain tubes
• No-drill installation on most applications; leave stake pockets open for accessories
• Manufacturer Part Number: 449337TS
• Limited 5-year warranty

Fits 2024-2026 Toyota Tacoma with 6ft bed (SR, SR5, Trailhunter, TRD Off-Road, TRD PreRunner, and TRD Sport).

The BAK Revolver X4s is a premium hard rolling tonneau cover designed for maximum security and a refined, low-profile aesthetic. This third-generation cover features heavy-duty aluminum slats wrapped in industrial-grade vinyl with a consistent matte black finish across the entire assembly, including the underbody and mounting clamps. When closed, the patented rotational locking system secures the cover along the full length of the bed rails on both sides to protect your cargo from theft and the elements.

Operation is straightforward: the cover rolls forward toward the cab, providing full bed access without blocking the third brake light or obstructing rear-view mirror visibility. It stays secured while driving via a durable strap and buckle system. Integrated bulkhead seals and newly designed flat side rail seals provide superior weather resistance for your 6ft Tacoma bed.

• Part Number: 80447
• Material: Matte black heavy-duty aluminum slats with industrial-grade vinyl wrap
• Security: Full-length rotational locking system for unrivaled strength
• Design: Low-profile, roll-up design with no-drill installation
• Safety: Capped aluminum slats protect hands during operation
• Finish: Matte black aluminum underbody, clamps, and rear corner caps
• Warranty: Manufacturer 5-year warranty

Fits select 2007-2022 Toyota Tundra models with a 5.7ft bed and the factory OE track system. This includes SR5, Limited, Platinum, 1794 Edition, and TRD Pro trims.

The BAK Revolver X4s (MPN: 80409T) offers a premium blend of security and style. This hard roll-up tonneau cover features a stealthy matte black finish from the aluminum slats and side rails down to the mounting clamps and hardware. Built with patented rotational locking rails and automatic slam latches, it provides Level-3 security that resists prying and forced entry. The interlocking aluminum slats are reinforced with a TriShield 70-grade matte vinyl surface, creating a slash-resistant barrier that supports up to 400 lbs. of evenly distributed weight.

Designed for maximum utility, the Revolver X4s uses PrecisionRoll technology to provide full bed access without blocking your rear-view mirror. The integrated bulkhead seal and flush-fitting side seals offer superior weather resistance, keeping your cargo dry and protected. Installation is straightforward with a no-drill, clamp-on mounting system specifically engineered for the Tundra's factory rail system.

• Patented interlocking aluminum slats with 400-lb. capacity
• Level-3 security with rotational locking rails and slam latches
• Industrial-grade TriShield 70-grade matte vinyl surface
• Low-profile design sits nearly flush with bed rails
• Integrated bulkhead and side rail seals for weather protection
• Quick clamp-on installation requires no drilling
• Manufactured in the USA with a limited 5-year warranty
• MPN: 80409T

Fits 2007-2022 Toyota Tundra models with a 5.7ft bed and without the OE track system. This includes SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone trims.

The BAK Revolver X4s (MPN 80409) is a premium hard roll-up tonneau cover designed for maximum security and a sleek, low-profile aesthetic. Constructed with patented interlocking aluminum slats, this cover provides slash-resistant Level-3 security and supports up to 400 lbs of evenly distributed weight. The exterior is finished with an all-matte black TriShield 70-grade vinyl surface, offering a refined look that resists UV damage and harsh weather conditions.

Security is handled by patented rotational locking rails and automatic slam latches that secure the entire length of the bed, preventing prying or forced entry. When full bed access is needed, the PrecisionRoll technology allows the cover to roll up tightly against the bulkhead, secured by integrated safety straps for driving. The no-drill, clamp-on mounting system ensures an easy installation that typically takes less than an hour.

• Patented interlocking aluminum slats with 400-lb capacity
• One-piece TriShield 70-grade matte vinyl surface with aluminum reinforcement
• 360-degree matte black protective finish on slats, clamps, and hardware
• Rotational locking rails and automatic slam latches for superior security
• Integrated bulkhead seal and flush-fitting side seals for weather resistance
• Low-profile design sits nearly flush with the bed rails
• Made in the USA with a limited 5-year warranty
• Compatible with most 5th-wheel hitches

Fits 2012-2024 Ram 1500, 1500 Classic, 2500, and 3500 models equipped with the RamBox Cargo Management System and a 6.4ft bed.

The BAK Revolver X4s provides the ultimate balance of heavy-duty security and low-profile styling. This premium hard roll-up tonneau cover features a stealthy matte-black finish across the slats, side rails, and hardware. Built with interlocking aluminum slats topped with a TriShield 70-grade matte vinyl, it offers Level-3 security and slash-resistance that traditional soft covers cannot match. The patented rotational locking rails secure the entire length of the bed, while the automatic slam latches ensure your cargo is locked tight the moment the cover is closed.

Designed for full bed utility, the Revolver X4s uses PrecisionRoll technology for easy one-handed operation. When rolled forward, it provides 100% bed access without obstructing your rear view or third brake light. The heavy-duty construction supports up to 400 lbs of evenly distributed weight and installs in under an hour with a simple clamp-on system that requires no drilling.

• Manufacturer Part Number: 80213RB
• Construction: Interlocking aluminum slats with TriShield 70-grade vinyl overlay
• Finish: Industrial-grade matte black (360º protection)
• Load Rating: 400 lbs. (evenly distributed)
• Security: Level-3 slash-resistant with patented rotational locking rails
• Installation: Clamp-on, no-drill (estimated 60 minutes)
• Special Fitment: Designed specifically for models with the factory RamBox system
• Warranty: 5-Year Limited
• Origin: Made in the USA with global materials

Fits 2020-2026 Chevrolet Silverado and GMC Sierra 2500/3500 HD models equipped with the 6.10ft bed.

The BAK Revolver X4ts (MPN 80133RK) provides a unique blend of security and utility by combining a hard-rolling tonneau cover with integrated T-slot rails. This rack-ready design allows you to mount truck racks, crossbars, and gear carriers directly to the bed rails without sacrificing bed access or security. Constructed with patented interlocking aluminum slats and a 70-grade TriShield vinyl overlay, the X4ts supports up to 400 lbs of evenly distributed weight while providing a slash-resistant barrier for your cargo.

• Rack Ready: Integrated T-slot channels in the rails make it easy to add racks and carriers for tents or gear.
• Advanced Security: Patented rotational locking rails and automatic slam latches secure the cover along the entire length of the bed.
• Heavy-Duty Build: High-strength aluminum slats and TriShield 70-grade vinyl support up to 400 lbs.
• Low Profile: Sits nearly flush with the bed rails for a stealthy appearance and improved aerodynamics.
• Full Bed Access: PrecisionRoll Technology allows the cover to roll forward for 100% bed access without blocking the third brake light.
• Simple Install: No-drill, clamp-on installation typically takes one hour or less using basic hand tools.
• Weather Resistance: Features an integrated bulkhead seal and flush-fit side seals to keep the elements out.

Fits 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 models with a 6.7ft (Standard) bed, including LTD and Limited versions.

The BAK Revolver X4s (MPN 80131) offers the perfect balance of a high-security hard tonneau cover and the convenient operation of a roll-up. Featuring a premium 360-degree matte black finish from the top vinyl to the aluminum slats and mounting hardware, the X4s provides a stealthy, low-profile look that sits nearly flush with the bed rails. This cover is built for durability and heavy-duty use, utilizing interlocking aluminum slats reinforced with TriShield 70-grade vinyl to provide a 400-lb. evenly distributed weight capacity.

Security is a priority with patented rotational locking rails and automatic slam latches that secure the cover along the entire length of the bed. This Level-3 security design is slash-resistant and prevents forced entry. When you need full bed access, the PrecisionRoll technology allows the cover to roll up smoothly against the bulkhead, where it can be secured with integrated safety straps. The no-drill, clamp-on installation typically takes less than an hour with basic hand tools.

• Premium matte black aluminum slats and hardware for a refined, non-reflective finish
• Patented rotational locking rails and automatic slam latches for maximum cargo security
• TriShield 70-grade vinyl surface with integrated bulkhead and side seals for weather resistance
• Supports up to 400 lbs. of evenly distributed weight
• Full bed visibility and access with integrated fastening straps
• Simple no-drill, clamp-on installation
• Compatible with most 5th-wheel hitches
• Made in the USA with a limited 5-year warranty
• Manufacturer Part Number: 80131

The BAK Revolver X4s (MPN 80101) provides a premium, low-profile security solution for select 1988-2017 Chevrolet Silverado and GMC Sierra trucks equipped with a 6.6ft bed. This hard roll-up tonneau cover features a refined matte black finish across the aluminum slats, mounting clamps, and hardware, providing a stealthy appearance that resists UV damage and daily wear.

Engineered for maximum cargo protection, the X4s utilizes patented rotational locking rails and automatic slam latches that secure the cover along the entire length of the bed rails. The interlocking aluminum slats create a slash-resistant barrier with Level-3 security and are rated to support up to 400 lbs of evenly distributed weight. For superior weather resistance, the TriShield 70-grade vinyl surface is bonded to the aluminum core to eliminate seams, working in tandem with integrated bulkhead and side seals to keep the bed dry.

• Fits 6.6ft beds on select 1988-2017 Chevy/GMC C1500-K3500 and Silverado/Sierra 1500/2500/3500 models.
• Industrial-strength interlocking aluminum slats with 400-lb load capacity.
• Low-profile design sits nearly flush with bed rails for a clean, aerodynamic look.
• PrecisionRoll technology ensures smooth operation and 100% bed access without obstructing the third brake light.
• Durable matte black TriShield 70-grade vinyl skin over aluminum reinforcement.
• Quick, no-drill clamp-on installation typically completed in under an hour.
• Made in the USA with global materials and backed by a 5-year limited warranty.

Fits 2022-2025 Nissan Frontier models with a 5ft bed (PRO-4X, PRO-X, S, SL, and SV).

The BAK BAKFlip MX4 TS combines the proven security of a hard-folding cover with enhanced utility through integrated T-slot channels in the bed rails. This design allows you to seamlessly mount aftermarket crossbars and racks for cargo baskets or bike carriers without sacrificing bed security. Constructed from heavy-duty aluminum panels with a premium matte black finish, this cover provides superior protection against UV damage, scratches, and impacts.

The MX4 TS features a low-profile design that sits flush with the bed caps, maintaining the sleek lines of your Frontier while offering a 400lb weight capacity. When full bed access is required, the panels fold forward toward the cab and are secured by high-strength prop rods with rubber bumpers to protect the truck's finish. The integrated drainage system and durable rubber seals ensure your cargo remains protected from the elements.

• Integrated T-slot rail system for easy rack and accessory mounting
• Heavy-duty aluminum construction supports up to 400 lbs. (evenly distributed)
• Matte black specialty automotive coating resists UV fading and scratches
• Full bed access with integrated prop rods and third brake light visibility
• No-drill installation on most applications with integrated drainage tubes
• Manufacturer Part Number: 449538TS
• Limited five-year warranty