This filter features five layers of pre-oiled cotton gauze media to provide maximum performance. Its progressive layering allows the filter to flow at high levels even when dirty. This media is perfect for street and/or track use. Pro 5R filters are easily recharged with aFe's POWER CLEANER and blue air filter oil. aFe POWER performance air filters use a rounded, evenly spaced pleat design which allows for more usable filter surface area, providing increased flow and greater dust holding capacity. This pliable sealing surface conforms to even the most uneven filter housing, making for a perfect filter fit and sealing surface every time. This design eliminates the use of gaskets or sealants and always goes back to its original form. All aFe POWER flat panel performance air filters are constructed with a full 360-degree polyurethane frame. Unlike other materials that degrade after repeated heat cycles in an engine bay, polyurethane maintains its original molded shape.

• increase in flow over stock, this Pro 5R air filter features factory-oiled media for maximum performance. Its progressive bump seal design and polyurethane frame makes it extremely durable and simple to install.
• Pro 5R Filter Media Features Five Layers of Progressive Oiled Cotton Gauze for Maximum Performance
• Deep, Open Pleats Allow for Increased Surface Area, Flow, and Dust Holding Capacity
• Washable and Reusable for Multiple Cleaning Cycles

This Part Fits:

This 7” tall 360-degree radial flow air filter features a 5-1/2" by 7-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. Multiple air inlets bring in cool air when under power without capturing any warm air surrounding the engine. The factory MUA (Multi-Air Unit Actuator) is easily transferred to the aFe POWER housing to guarantee correct crankcase flow, avoiding check engine lights and damaging factory hoses and sensors. All hoses, clamps, and screws are provided to connect to the aFe POWER tube and secure the MUA to the aFe POWER housing. The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. This is a direct fit intake system that utilizes factory mounting points. All necessary stainless-steel clamps, silicone coupling, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. For Dodge Durango SRT Hellcat models, the air filter sits right under the SRT hood vent. aFe Power recommends purchasing 28-10303 pre-filter to protect the air filter from rain and other elements. aFe Power strongly recommends avoiding pressure washing around the hood vent and driving under heavy rain.

• With carbon fiber components, impressive power gains, and an aggressive supercharger whine, the Track Series was made for performance enthusiasts like you.
• Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
• Intake is Designed to Work With The Factory Multi-Air Unit Actuator (MUA)
• Massive Airbox Adds an Extra Air Inlet for Cooler Air Intake Temperatures
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Dyno-Proven Gains up to +36 HP & +35 Lbs. x Ft. TQ
• Lightweight, 100% Carbon Fiber Intake Tube
• Measured Flow: 780 CFM @ 7" H2O
• Outflows Factory Intake by 30%

This Part Fits:

One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle's hood is closed. It utilizes the vehicle's OE air inlet with no additional hardware. An additional auxiliary air inlet is available for use to bring in air from the front of the vehicle when under power, or can be closed with an included plug if desired.

• Open-Element Design Allows For Viewing of Massive Air Filter
• Washable and Reusable Pro 5R Air Filter for Maximum Air Flow
• Seals to Hood to Reduce Intake Air Temperature
• Built-In Scoop Provides Increased Air Flow
• Measured Flow: 325 CFM @ 7 IN H2O
• Outflows Factory Intake by 71%
• +9 HP & +8 Lbs. x Ft. TQ

This Part Fits:

Large Three Layer Performance Air Filter: This 360-degree radial flow air filter features a 3-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle's hood is closed. A larger, upgraded air inlet captures air from the factory scoop and delivers it directly to the air filter.Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.

• Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Measured Flow: 250 CFM @ 7 IN H2O
• Outflows Factory Intake by 14%
• +6 lbs. x ft. TQ & +5 HP

This Part Fits:

Dual 360-degree radial flow air filters feature our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Their progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Their inverted tops make for more filter surface area, resulting in longer service intervals. The smooth housing, constructed of cross-linked polyethylene (XLPE), is used to minimize the number of components and ensure the coolest air intake charge available. The housing utilizes the factory OE air inlets. A vacuum-formed removable cover seals the system, ensuring cool air delivery to the engine, but can also be removed for extra air flow if desired. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. In 2020, Porsche created a recall to add a heat shield in the engine compartment under the air box. The heat shield is to prevent foreign objects left in the engine compartment to make contact with hot exhaust system components and ignite. aFe POWER housing will currently not fit with the heat shield added after the recall. aFe POWER is working on making an update to the housing to allow fitment with this heat shield.

• With exposed hardware and a motorsport inspired design, this Stage-2 Si's aggressive dual air filter design is sure to draw attention.
• Washable and Reusable Pro DRY S Air Filters for Maximum Convenience
• Aggressive Dual Air Filter Design with Vacuum-Formed Housing Cover
• Utilizes Factory Mounting Locations and Incorporates OE Air Inlets
• Custom aFe POWER Laser-Etched Stainless Steel Washers and Bolts
• Dyno-Proven Gains up to +15 HP & +13 Lbs. x Ft. TQ
• Measured Flow: 580 CFM @ 7" H2O
• Outflows Factory Intake by 7%

This Part Fits:

Quantum Cold Air Intake System Dynamic Air Scoop (D.A.S.) increases cool, fresh airflow for maximum performance and throttle response for your Ford F-150 & Raptor. It is designed to capture the coolest, freshest air from the top of the front grille to ensure increased air velocity into your air intake system. Lower Intake Air Temperatures: This Dynamic Air Scoop guides cool ambient air from outside the vehicle directly into your intake system. The cool dense air allows your vehicle to run more efficiently, increasing performance. Durable LLDPE Construction: This D.A.S. is constructed from high-quality linear low-density polyethylene (LLDPE) that is impact resistant, extremely durable, and 100% recyclable. Hassle-Free Installation: The 53-10008SR Dynamic Air Scoop fits the factory systems, as well as aFe POWER’s Quantum and Magnum FORCE Stage-2 intakes. It does NOT fit aFe POWER Momentum intake systems. This part easily snaps into the air box and requires no modification to your vehicle. Emissions Disclaimer: This product does not require a CARB EO#.

• Quickly Snaps Into Air Box and All necessary hardware included for a Hassle-Free Installation
• Designed to fit factory intakes as well as aFe POWER's Quantum and Magnum FORCE Stage-2
• Durable, Impact-Resistant LLDPE Polymer Construction, Color: Red

This Part Fits:

These 6” tall 360-degree radial flow air filters feature a 3.5" flange and our pre-oiled Black Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. Their inverted bullet-style top makes for more filter surface area, resulting in longer service intervals. This media is perfect for street and/or track use. Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. Once the system is installed, the air filters can be easily removed from the housing for maintenance by uninstalling the intake tube. The smooth one-piece sealed housing, constructed of heat-resistant red cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates the factory air inlet scoop, using no additional hardware. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Its red XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and premium silicone couplings are used for durability while also providing the most secure installation available. Aluminum and Nylon vacuum fitting are included for a perfect fit and finish. Momentum GT intakes are designed with fewer parts for a fast and easy installation.

• Durable Red XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Washable and Reusable Black Oiled Pro 5R Air Filters for Maximum Performance
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Premium Stainless Clamps and Silicone Couplings Provide a Secure Seal
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2 IN diameter carbon fiber stainless steel clamp-on exhaust tips. The tips feature an aFe POWER logo for a unique style. This system produces an aggressive sound unleashing all available horsepower and torque. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. This system features a crossover balance tube designed to equalize and distribute exhaust pulses reducing drone, and improving sound. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.

• Dual 4-1/2 IN Diameter Carbon Fiber Stainless Steel Clamp-On Exhaust Tips
• All Necessary Hardware is Included for a Hassle-Free Installation
• Utilizes Factory Style Flanges and Hangers for a Secure Fit
• 100% TIG-Welded for Strength and Durability

This Part Fits:

This Part Fits:

Constructed with 100-percent polyurethane boxed frame, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

• Progressive Bump Seal Design For A Perfect Fit
• 3 Layers of Progressive Synthetic (Dry) Media
• Made From 100% 55-Shore A Polyurethane
• Limited Lifetime Warranty
• Hassle Free Installation
• OE Direct Replacement
• Washable And Reusable
• 35mm Deep Pleats

This Part Fits:

This filter features three layers of oil-free synthetic media and requires no oil during maintenance to provide maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity. This media is best suited for street use. Pro DRY S filters are easily recharged with aFe's POWER CLEANER. aFe POWER performance air filters use a rounded, evenly spaced pleat design which allows for more usable filter surface area, providing increased flow and greater dust holding capacity. This pliable sealing surface conforms to even the most uneven filter housing, making for a perfect filter fit and sealing surface every time. This design eliminates the use of gaskets or sealants and always goes back to its original form. All aFe POWER flat panel performance air filters are constructed with a full 360-degree polyurethane frame. Unlike other materials that degrade after repeated heat cycles in an engine bay, polyurethane maintains its original molded shape.

• Pro DRY S Filter Media Features Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience
• Deep, Open Pleats Allow for Increased Surface Area, Flow, and Dust Holding Capacity
• Progressive Bump Seal Design for a Perfect Fit and Sealing Surface Every Time
• 100% Polyurethane Frame on All Sides for Extra Long Filter Life
• Washable and Reusable for Multiple Cleaning Cycles

This Part Fits:

This 9” tall 360-degree radial flow air filter features a 5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It utilizes the vehicle's OE air inlet with no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware, and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Stainless-steel clamps are included for strength, and premium silicone couplings allow for ample flexibility. Magnum Force intakes are designed with fewer parts for a fast and easy installation.

• Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
• Premium Stainless-Steel Clamps and Silicone Couplings Provide a Secure Seal
• Utilizes Factory Mounting Locations for an Easy and Secure Installation
• Washable and Reusable Pro 5R Air Filter for Maximum Performance

This Part Fits:

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

• Repl. Factory Intake For Improved HP/Torque/Styling
• Rotomolded Plastic Tube For Maximum Air Flow
• Uses Pro 5R Filter For Maximum Air Flow
• Increased Horsepower And Torque
• Improved Throttle Response
• 2 Year Limited Warranty

This Part Fits:

This filter features five layers of pre-oiled cotton gauze media to provide maximum performance. Its progressive layering allows the filter to flow at high levels even when dirty. This media is perfect for street and/or track use. Pro 5R filters are easily recharged with aFe's POWER CLEANER and blue air filter oil. aFe developed this sturdy 18-gauge steel wrinkle-black powder-coated heat shield to mount onto the top of the lower half of the factory airbox to provide a hassle-free installation utilizing factory mounting locations. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This intake replaces the factory upper intake box. All hardware and components are included for a hassle-free installation. This kit utilizes high quality, stainless steel clamps and a silicone coupler.

• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Mounts to Lower Half of Factory Airbox for Easy Installation
• Measured Flow: 380 CFM @ 7" H20
• Outflows Factory Intake by 19%

This Part Fits:

This DPF-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 4 IN diameter polished 304 stainless steel clamp-on exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This DPF-back exhaust gives you the option for a side exit or rear exit tailpipe. Both options will evacuate the exhaust gasses from under the vehicle. This system produces a mild sound unleashing all available horsepower and torque. Utilizing a factory style hanger this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Upgrade your Sprinter's exhaust with this Vulcan Series DPF-back. Designed to evacuate NOx from under your van, it’s a must-have for camping enthusiasts.
• 4 IN Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tip
• Constructed from 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Hanger for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel, smartseal clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This charge pipe kit also features factory style billet aluminum quick-connect adapters with o-ring seals to ensure a leak-free fit while maintaining superior strength and durability. Finished in textured red powder coating with a unique laser-etched aFe POWER logo for a custom look.

• Directly replace your Kia Stinger's restrictive charge pipes with aFe POWER's BladeRunner free-flowing, heat-resistant aluminum charge pipes.
• Features Premium Stainless-Steel SmartSeal Clamps And 5-Ply Silicone Couplings
• 1/8" NPT Ports are Provided for Connecting Sensors or Water Methanol Injection
• Features Factory Style Quick-Connect Adapters With O-ring Seals
• TIG-Welded 2-1/2" Hot Side and 2-3/4" Cold Side Aluminum Pipes
• Powder Coated Textured Red for Heat and Corrosion Resistance

This Part Fits:

Constructed with 100-percent polyurethane boxed frame, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

• Outflows Stock Paper Filters For Improved Horsepower and Torque
• 100% Polyurethane Frame On All Sides For Extra Long Filter Life
• Washable And Reusable For Multiple Cleaning Cycles
• Progressive Bump Seal Design For A Perfect Fit

This Part Fits:

Constructed with 100-percent polyurethane on top and bottom, this high flow, oiled performance filter is our highest flowing media for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

• Inverted Top Design Makes for More Surface Area, Resulting in Longer Service Intervals
• Deep, Open Pleats Allow for Increased Surface Area, Flow, and Dust Holding Capacity
• 100% Polyurethane Base and Top for Extra Long Filter Life
• Washable and Reusable for Multiple Cleaning Cycles
• 4 IN F x 6 IN B x 4-1/2 IN T (Inverted) x 6 IN H

With three layers of progressively finer mesh synthetic media between 100% polyurethane top and base, this high flow, "oil-free" conical performance filter provides maximum convenience and easy maintenance with excellent airflow. Washable and reusable for multiple cleanings, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Pliable polyurethane flange with integrated bumps insures tight, no leak seal over the life of the filter. This filter has a 99.2% filter efficiency.

• Maximum Convenience and Easy Maintenance With Excellent Airflow
• 100% Polyurethane Frame On All Sides For Extra Long Filter Life
• Washable And Reusable For Multiple Cleaning Cycles
• Maximum Airflow for Maximum Performance Gains
• Pliable Polyurethane Flange w/Integrated Bump
• Filter Washes Clean With Soap and Water

Each Pedal 2 Metal unit is designed specifically for individual vehicle models, using factory-style connectors to ensure a straightforward, secure installation. Its sleek, compact design eliminates the hassle of bulky wiring, module cases, and switch panels, allowing it to blend discreetly with your vehicle’s original equipment for a clean, unobtrusive look. With the free Pedal 2 Metal Smartphone App, available on both iOS and Google Play Store, you can fine-tune each of the five acceleration modes to match your unique driving style entirely through Bluetooth. Whether navigating city streets or hitting the racetrack, this feature allows you to dial in the exact throttle curve you need, exactly when you need it. Valet Mode increases your vehicle’s security when handing off the keys, easily activated or deactivated through the Pedal 2 Metal app. By limiting acceleration, it reduces performance to discourage aggressive driving. For added protection, Pedal Lock Mode prevents the throttle from opening altogether, offering an extra layer of security against unauthorized use. The Pedal 2 Metal Throttle Booster not only boosts throttle response but also improves your vehicle's transmission shifting. Enjoy smoother upshifts and downshifts for a more seamless driving experience. This enhancement leads to quicker acceleration and better control, transforming every drive into a more responsive and enjoyable ride, whether navigating city streets, cruising on the highway, or towing.

• Instantly improve your vehicle’s throttle response and drivability with the Pedal 2 Metal Throttle Enhancer.
• Compact Dimensions for Stealthy Install Under the Kick Panel
• Module Utilizes Factory Connectors & Installs in Minutes
• 5 Driving Modes w/ Adjustable Sensitivity Settings
• Bluetooth App Available for both iOS and Android
• Valet and Lockout Functions for Added Security
• Hassle-Free, Plug-and-Play Installation

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 8” tall 360-degree radial flow air filter features a 4" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals, while reinforced metal provides maximum strength to prevent filter collapse. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing connects to the factory air inlet on the fender to capture cool air away from the hot engine air. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps and silicone coupler are included for strength and durability. Momentum GT intakes are designed with fewer parts for a fast and easy installation.

• Sealed Housing Captures Cool Air Optimizing Performance While Maintaining Factory Air Inlet
• Premium Clamps and Silicone Coupler Provide a Secure Seal and Excellent Durability
• Large Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable And Reusable Pro DRY S Air Filter For Maximum Convenience

This Part Fits:

Large Three Layer Performance Air Filter:The Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This aFe POWER Pro DRY S is a 9" tall, oil-free, 360-degree radial flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use.Unique One-Piece Housing:The textured one-piece sealed housing, constructed of cross-linked polyethylene (XLPE), is used to eliminate the use of an overabundance of parts and ensure the coolest air intake charge possible. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. An optional auxiliary air inlet pulls in additional cool air from the inner fender when under power.Massive Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Premium Components:Stainless-steel T-Bolt clamps and an injection molded coupling are included for strength and durability, while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts and utilize factory mounting points for a fast and easy installation.Note:Application includes models equipped with the e-torque engine option.

• Get more power across your everyday RPM range with this Momentum GT Cold Air Intake System. Its massive intake tube and filter ensure it not only will perform - but also will draw attention to your new RAM 1500's engine bay.
• Premium T-Bolt Clamps and Injection Molded Couplings Provide a Secure Seal
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro DRY S Air Filter for Life-Long Convenience
• Massive Heat-Resistant Intake Tube with Sealed One-Piece Housing
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

This system produced gains of up to +6 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2 IN - 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.

• 2.5 in. Dia. 409 Stainless Steel
• Factory Hanger Locations
• 2 Year Limited Warranty
• 100% Hand TIG Welded
• 50 State Legal

This Part Fits:

Twisted Steel Downpipe 2-1/2 to 2-1/4 IN 409 Stainless Steel w/ Cat Toyota Tacoma 16-19 V6-3.5L

• Heavy Duty Laser Cut Mild Steel Flanges are used for a Durable Leak-Free Seal
• Constructed from 2-1/2" - 2-1/4" Mandrel-Bent 409 Stainless Steel Tubing
• Works with Factory Exhaust System with No Modifications Necessary
• Utilizes a Dual High Flow Catalytic Converters for Maximum Flow
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This Part Fits:

Constructed with 100-percent polyurethane boxed frame, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

• Outflows Stock Paper Filters For Improved Horsepower and Torque
• 100% Polyurethane Frame On All Sides For Extra Long Filter Life
• Washable And Reusable For Multiple Cleaning Cycles
• Progressive Bump Seal Design For A Perfect Fit

This Part Fits:

With three layers of progressively finer mesh synthetic media between 100% polyurethane top and base, this high flow, "oil-free" conical performance filter provides maximum convenience and easy maintenance with excellent airflow. Washable and reusable for multiple cleanings, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Pliable polyurethane flange with integrated bumps insures tight, no leak seal over the life of the filter. This filter has a 99.2% filter efficiency.

• Maximum Convenience and Easy Maintenance With Excellent Airflow
• 100% Polyurethane Frame On All Sides For Extra Long Filter Life
• Washable And Reusable For Multiple Cleaning Cycles
• Maximum Airflow for Maximum Performance Gains
• Pliable Polyurethane Flange w/Integrated Bump
• Filter Washes Clean With Soap and Water

Enhance your engine's performance with our bolt-on aFe POWER Pulley kit. By changing the pulley diameter, you can adjust the spin rate of the supercharger, resulting in increased boost and amplified power. The aFe POWER Pulley kits are meticulously crafted to achieve a perfect equilibrium of lightweight design and high strength through precision machining. Count on our pulley kits for optimal functionality, a flawless fit, and an impeccable finish, ensuring a seamless boost to your engine's power. Pulleys crafted from high-quality 6061-T6 billet aluminum showcase exceptional characteristics. Through precision machining, these pulleys achieve a remarkable balance of light weight and high strength, ensuring not only optimal functionality but also a perfect fit and finish. Our pulley kits featuring a 17-4 stainless steel hub, combining corrosion resistance and high strength through precision machining, ensuring a perfect fit, impeccable finish, and optimal functionality. Please note that special tools are required for removing the factory pulley from the supercharger snout, and we recommend professional installation for the kit to ensure seamless performance.

• Boost increase by approximately 3PSI ±.5
• Includes Screws, Washers & Thread locker
• Smaller Belt Required (Gates K100572HD)
• CNC Machined 17-4 Stainless Steel Hub
• CNC Machined 6061-T6 Aluminum Pulley
• Pulley Size: Ø72.5mm (2.85”)
• Laser Etched Logo and Sizing
• Black Hard Anodized Finish
• Tuning is Required

This Part Fits:

This 360-degree radial flow air filter features a 3-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. It features an aFe Power design inspired by European vehicles. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It’s design incorporates the OEM air scoop to ensure that it gets the coldest air available. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our unique filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. Included billet aluminum fittings allows stock connections to transfer over seamlessly.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
• Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
• One-Piece Housing With Integrated Air Scoop to Capture the Coldest Air Possible
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Dyno-Proven Gains up to +14 HP & +14 Lbs. x Ft. TQ
• Measured Flow: 335 CFM @ 7” H20
• Outflows Factory Intake by 24%

This Part Fits: