Fits 2025-2026 Nissan Armada and Infiniti QX80 (V6-3.5L tt).

The aFe Power SCORCHER BLUE Power Module provides a significant performance upgrade by increasing turbo boost pressure to improve vehicle efficiency, torque, and throttle response. This next-generation plug-and-play module (part number 77-86107) connects via Bluetooth 4.0 to your iOS or Android smartphone, allowing for on-the-fly power adjustments without routing wires through the firewall. The included LED control switch provides tactile mode selection directly from the cabin, while the companion app offers advanced monitoring and customization.

• Four power settings: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red)
• Real-time engine parameter display including turbo boost gauge (MAP) via smartphone app
• Performance tracking for 0-60 mph and 1/4 mile times
• Customizable power modes and firmware updates via the free aFe POWER SCORCHER BLUE app
• Plug-and-play installation leaves no trace (footprint) on the factory ECU
• Bluetooth 4.0 connectivity for wireless control and handheld remote functionality

The Bully Dog GT Bypass Cable is an essential requirement for performance tuning on 2018 and newer Dodge RAM trucks equipped with the 6.7L Cummins diesel engine. Starting in the 2018 model year, a factory Security Gateway Module (SGM) was introduced to block the OBDII port from communicating with aftermarket devices. This bypass cable allows your Bully Dog GT tuner to circumvent the SGM, establishing a direct connection to the vehicle's CAN bus for ECM communication, data logging, and tuning.

• Required for all 2018-Up RAM 2500/3500 trucks with 6.7L Cummins engines
• Bypasses the factory Security Gateway Module (SGM/SGW)
• Enables full read/write capabilities for the Bully Dog GT tuner
• Direct plug-and-play installation into the factory harness
• Ensures stable communication for vehicle monitoring and calibration

Fits select 2013-2017 Ram 2500 and 3500 (6.7L).

This Bully Dog Unlock Cable is a necessary component for owners of 2013 and newer Cummins-powered Ram trucks who want to utilize the performance tuning capabilities of the Bully Dog GT Diesel. Because the engine control module (ECM) on these vehicles is locked from the factory, this specialized cable provides the essential physical link required to bypass the lock and enable the GT Diesel tuner to communicate with the vehicle's computer.

• Required for ECM unlocking on 2013-2017 6.7L Cummins engines
• Designed exclusively for use with the Bully Dog GT Diesel tuner
• Provides a secure, direct-fit connection to the vehicle diagnostic system
• Enables performance tuning, monitoring, and diagnostic functions

Fits select 1992-2005 Ford Aerostar, Bronco, Contour, Crown Victoria, E-Series, Escape, Escort, Excursion, Expedition, and Explorer (3.0L).

The SCT Performance Eliminator 4-Bank E-Prom Chip is a versatile tuning solution for Ford enthusiasts running EEC-IV and EEC-V engine control modules. Whether you are optimizing a dedicated tow rig or a nitrous-fed street machine, this multi-program chip allows you to store and easily switch between different tune files to suit your driving conditions. Built with a focus on reliability and performance, the chip also features an integrated anti-theft mode to provide an extra layer of security for your vehicle.

SCT designs these components with strict adherence to the Clean Air Act, ensuring that your tuning remains emissions-compliant without deleting factory systems. The chips are calibrated based on SCT’s extensive background in OE powertrain software, providing functional and powerful tuning options for vintage and late-model Ford platforms.

• 4-Bank multi-program design for storing up to four custom tune files
• Directly compatible with Ford EEC-IV and EEC-V PCMs
• Integrated vehicle anti-theft mode for enhanced security
• Ideal for nitrous, towing, or forced induction applications
• Easily switchable between tune files for different driving needs
• Complies with Clean Air Act standards; will not modify or delete emissions systems
• User-adjustable options for fine-tuning performance parameters

Fits select 2011-2019 Nissan Juke (S, SL, SV, Nismo, Nismo RS) and 2017-2019 Nissan Sentra (SR Turbo, Nismo) models equipped with the L4-1.6L turbo engine.

The aFe POWER SCORCHER GT power module is designed to provide quick and noticeable performance gains by altering pressure sensor signals to increase turbo boost. This module features a high-quality case and a dedicated wire harness equipped with factory-style connectors for a secure, weather-tight fit. Engineered for reliability, 100% of these units are tested to ensure they meet strict performance standards without compromising the vehicle's electrical integrity.

Installation is a straightforward plug-and-play process that typically takes around 30 minutes, requiring no cutting or splicing of factory wires. Because the module does not modify the factory ECU flash, it leaves no trace or "footprint" once removed, making it an ideal choice for enthusiasts looking for reversible performance upgrades. This module is fully compatible with other aFe POWER performance products.

• Manufacturer Part Number: 77-46104
• Installation: 100% Plug-and-Play with factory-style connectors
• Install Time: Approximately 30 minutes
• Construction: High-quality housing and wire harness
• ECU Safety: Leaves no trace or footprint on the factory ECU
• Testing: Dyno-tested for significant power increases and 100% unit-tested for reliability

Fits 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser.

The aFe POWER SCORCHER GT Power Module (MPN 77-46010) provides a significant boost in performance through a simple, 10-minute plug-and-play installation. By safely altering the Mass Air Flow (MAF) sensor signal, this module optimizes engine parameters to increase horsepower and torque while sharpening throttle response. The unit is housed in a rugged, black powder-coated aluminum extrusion enclosure designed for durability in high-heat environments.

Equipped with a physical ON/OFF button and a blue LED status indicator, the SCORCHER GT allows you to control the module's activity at a glance. It utilizes high-quality factory-style connectors that interface directly with your Toyota's stock wiring harness, requiring no cutting, splicing, or permanent modifications. Because it does not modify the ECU directly, it leaves no electronic footprint once removed.

• Alters MAF signal to improve power, torque, and throttle response
• Quick 10-minute installation using factory-style plug-and-play connectors
• High-quality black powder-coated aluminum enclosure
• Integrated ON/OFF button with blue LED status indicator
• Leaves no footprint on the factory ECU
• Fully compatible with aFe POWER Momentum GT intakes and replacement filters
• 100% tested for maximum reliability and protection
• Manufacturer Part Number: 77-46010

Fits select 2019-2026 Cadillac CT4, Chevrolet Silverado 1500, Chevrolet Colorado, GMC Sierra 1500, and GMC Canyon (L4-2.7L).

The aFe POWER SCORCHER GT Power Module provides a significant increase in turbo boost, improving vehicle performance and throttle response for the GM 2.7L turbo engine. This module alters pressure sensor signals to optimize efficiency without requiring any modifications to the factory wiring harness. The system features a black powder-coated aluminum extrusion housing and OEM-style connectors for a reliable, plug-and-play installation that typically takes under 30 minutes.

The included in-cabin LED light switch allows for on-the-fly power adjustments across four distinct settings. The module is 100% tested for reliability and is designed to leave no trace on the ECU after removal, ensuring no footprint is left behind.

• 4 Power Settings: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red)
• Increases turbo boost to improve throttle response and engine efficiency
• Direct plug-and-play installation with factory-style connectors
• In-cabin adjustment via LED light switch
• High-quality black powder-coated aluminum extrusion enclosure
• Leaves no footprint on the factory ECU
• Manufacturer Part Number: 77-44013

Fits select 2020-2025 Ford Bronco Sport, Escape, and Maverick models. This plug-and-play performance module delivers immediate increases in horsepower and torque by altering pressure sensor signals to increase turbo boost and sharpen throttle response.

The aFe POWER Scorcher GT is engineered for the enthusiast looking for a reliable, non-invasive power solution. The unit features a durable black powder-coated aluminum extrusion enclosure and a high-quality wiring harness with factory-style connectors for a secure, modification-free install that typically takes 30 minutes. An included in-cabin LED light switch allows for on-the-fly adjustments between four distinct power modes, ensuring the vehicle is optimized for everything from daily commuting to towing or spirited driving.

• 4-Position Power Settings: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red).
• Safe Performance: Enhances boost and efficiency without overwriting factory ECU tuning; leaves no footprint or trace when removed.
• Plug & Play Installation: Connects directly to OEM wiring sensors with no cutting or splicing required.
• Tested Reliability: 100% of units are tested to ensure protection and high reliability.
• Compatible: Optimized for use with stock configurations or aFe POWER performance intake and exhaust systems.
• MPN: 77-43048

The HKS Standard Fuel Cut Defender (FCD) is an essential electronic component for enthusiasts looking to increase boost levels beyond factory limits on turbocharged vehicles. Many factory ECUs are programmed with a safety fuel cut that triggers when the manifold pressure sensor (MAP) or air flow meter (AFM) signal exceeds a specific threshold. This unit intercepts that signal, clamping the voltage or frequency to prevent the ECU from initiating a fuel cut.

• Prevents factory overboost fuel cut to allow for higher boost levels
• Electronic signal modifier for voltage-based MAP or AFM signals
• Adjustable dial for precise signal clamping calibration
• Enables full use of boost controllers and upgraded turbochargers
• Manufacturer Part Number: 4501-RA002

By preventing the factory fuel cut, the HKS FCD allows for increased performance without the ECU interfering with the fuel supply. It is recommended to monitor air/fuel ratios and ignition timing whenever modifying engine management signals for increased boost.

Fits select 2012-2023 Audi (A3, A4, A5, A6, Q7, S3, TT) and Volkswagen (Arteon, Beetle, Golf, GTI, Jetta, Passat) models.

The aFe POWER SCORCHER High-Performance Ignition Coils are engineered as a premium direct replacement for factory ignition units. Designed with lower primary resistance than standard OE coils, these units deliver a higher energy spark to ensure complete fuel combustion across the entire powerband. Whether at idle or wide-open throttle, these coils provide the consistent voltage required for high-RPM operation and heavy engine loads.

By increasing spark energy by up to 20%, these coils help resolve common ignition-related issues such as rough idling, hesitation under load, and difficult cold starts. The improved combustion efficiency can also contribute to gains in horsepower and torque while extending the service life of the ignition system components.

• Up to 20% more spark energy than factory coils
• Lower primary resistance for a high-intensity spark
• Direct bolt-in replacement for factory coils
• Improved throttle response and smoother idle
• Quantity: 4 Pack
• Manufacturer Part Number: 77-92005-MB

Fits select 2006-2026 Chrysler, Dodge, Jeep, and Ram vehicles including the 300, Challenger, Charger, Durango, Grand Cherokee, and Ram 1500/2500/3500 trucks.

The aFe POWER SCORCHER High-Performance Ignition Coil set is engineered as a premium direct-fit upgrade for factory coils, providing a more robust spark for improved engine efficiency. These coils are designed with a lower primary resistance than OE units, which facilitates a higher energy discharge. This results in up to 20% more spark energy, ensuring more complete combustion across the entire RPM range, from idle to redline.

Installing a set of SCORCHER coils helps maintain ignition system performance under high-demand conditions, such as wide-open throttle or high-RPM operation. Drivers will experience tangible improvements in drivability, including smoother idling, more consistent cold starts, and increased throttle response. These coils bolt directly into the factory mounting positions for a straightforward installation that restores and enhances ignition reliability.

• Manufacturer Part Number: 77-92002-MD
• Quantity: Set of 8 ignition coils
• Spark Energy: Up to 20% increase over factory output
• Design: Lower primary resistance for high-energy spark
• Fitment Type: Direct replacement for OE coils
• Performance: Improves combustion, idle quality, and cold start reliability

Fits select 2001-2020 BMW 1, 2, 3, 4, 5, 6, 7 Series, X1, X3, X4, X5, X6, and Z4 models.

Optimize your vehicle’s ignition system with aFe POWER SCORCHER High-Performance Ignition Coils. Designed as a direct-fit replacement for factory units, these coils utilize a lower primary resistance to generate a higher energy spark. This increased output ensures more complete combustion across the entire powerband, from a stable idle to high-RPM wide-open throttle conditions.

With up to 20% more spark energy than original equipment, these coils improve engine efficiency, resulting in smoother idle, easier cold starts, and increased horsepower and torque. Built to withstand the heat and electrical demands of performance driving, the SCORCHER series provides a longer service life and more reliable ignition timing than standard replacements.

• Up to 20% more spark energy compared to factory coils
• Lower primary resistance for a high-intensity spark
• Ensures complete combustion from idle to redline
• Premium direct replacement for OE ignition coils
• Improves throttle response, idle quality, and cold starts
• Manufacturer Part Number: 77-92001-MC
• Set of 6 ignition coils

Fits select 2001-2020 BMW and Mini models.

Upgrade your vehicle’s ignition system with aFe POWER SCORCHER High-Performance Ignition Coils. Engineered as a premium direct replacement for factory units, these coils feature a lower primary resistance to deliver a higher energy spark—up to 20% more than stock. This increased energy ensures more complete combustion from idle to redline, providing better throttle response and smoother engine operation under high-load conditions and wide-open throttle.

• Direct-fit replacement for factory ignition coils
• Delivers up to 20% more spark energy for improved combustion efficiency
• Lower primary resistance than OE for a high-intensity spark
• Enhances drivability, idle quality, and cold start performance
• Built for long-term durability and consistent performance at high RPMs
• Manufacturer Part Number: 77-92001
• Sold individually; please order the quantity required for your engine configuration

Fits select 2022-2026 Toyota Tundra and 2023-2026 Toyota Sequoia models (V6-3.4L).

The aFe POWER SCORCHER BLUE Power Module (MPN 77-86011) is a high-performance, plug-and-play solution designed to safely increase turbo boost and improve overall drivability. This next-generation module interfaces with engine sensors via factory-style connectors to enhance performance without modifying the factory Engine Control Unit (ECU) or leaving a footprint, making it a reversible upgrade for forced induction systems.

Equipped with Bluetooth 4.0 technology, the SCORCHER BLUE allows for real-time power adjustments using a physical LED in-cabin switch or a smartphone app for iOS and Android. Users can toggle between four preset modes—Stock, Sport, Sport+, and Race—to accommodate different driving conditions while monitoring engine parameters such as Manifold Absolute Pressure (MAP).

• Bluetooth Connectivity: Wirelessly adjust power modes, custom tune settings, and upgrade device firmware via your mobile device.
• Four Power Modes: Clearly identifiable via the LED switch: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red).
• Dyno-Proven Results: Engineered to increase turbo boost, providing triple-digit horsepower and torque gains in manufacturer testing.
• Non-Invasive Installation: Factory-style connectors ensure a secure fit with no wire cutting or ECU flashing required.
• Performance Tracking: Integrated tools to measure 0-60 mph and 1/4 mile acceleration times.

Fits select 2022-2026 Toyota Tundra, Lexus GX550, and Lexus LX600 (V6-3.5L).

The aFe POWER SCORCHER BLUE performance module provides a safe, effective way to increase turbo boost and improve throttle response without modifying the factory ECU. This next-generation plug-and-play system installs easily using factory-style connectors, ensuring a secure fit while leaving no trace or footprint on the Engine Control Unit after removal.

Designed for versatility, the module features four distinct power settings—Stock, Sport, Sport+, and Race—which can be toggled via the included in-cabin LED remote or through the SCORCHER BLUE smartphone app. The Bluetooth 4.0 connectivity allows for wireless adjustments and real-time monitoring of engine parameters (MAP) directly from your iOS or Android device.

• Power Adjustment: Four modes identified by LED colors: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red).
• Bluetooth 4.0: Control power modes, update firmware, and view gauges through the free smartphone app.
• Performance Monitoring: Includes a turbo boost gauge and tools to measure 0-60 mph and 1/4 mile acceleration times.
• OEM Integration: Uses high-quality factory-style connectors for a reliable, weather-tight installation.
• Stealth Install: Does not leave a footprint on the ECU; easily removable for service.
• Manufacturer Part Number: 77-86005

Fits select 2019-2026 Cadillac CT4-V, Chevrolet Colorado, Chevrolet Silverado 1500, GMC Canyon, and GMC Sierra 1500 (L4-2.7L).

The aFe Power SCORCHER BLUE Power Module provides a significant boost in performance and throttle response by safely increasing turbo boost pressures. This plug-and-play system installs in-line with the factory MAP and TMAP sensors, allowing for immediate gains without flashing or modifying the factory ECU. Because the module does not alter the engine controller’s software, it leaves no footprint or trace when removed.

Control is handled on-the-fly through the free SCORCHER BLUE smartphone app (iOS and Android) or via the included cabin-mounted LED light switch. The Bluetooth-connected app serves as a digital gauge cluster, displaying real-time turbo boost and fuel pressure data while allowing you to toggle between four preset power modes: Stock, Sport, Sport+, and Race.

• Increases turbo boost for improved performance and efficiency
• Bluetooth connectivity allows adjustments and monitoring via smartphone
• Includes four distinct power settings for varying driving conditions
• Direct plug-and-play installation using factory-style connectors
• Displays real-time MAP, TMAP, and fuel pressure data in-app
• Built-in 0-60 and 1/4 mile performance timers
• Manufacturer Part Number: 77-84013

Fits select 2021-2026 Ford F-150, Bronco, Expedition, and Lincoln Navigator (V6-2.7L / 3.5L / 2.7L).

The aFe POWER SCORCHER BLUE Power Module is a sophisticated plug-and-play solution designed to safely increase horsepower and torque without altering the factory Engine Control Unit (ECU). By connecting directly to the engine's sensor harness using factory-style connectors, this module optimizes turbo boost and performance parameters while remaining completely undetectable once removed. This next-generation module features integrated Bluetooth 4.0 technology, allowing you to adjust power modes, view real-time MAP sensor data, and measure acceleration times directly from your iOS or Android smartphone.

• Performance Gains: Produces up to +56 HP and +62 lbs. x ft. torque on 3.5L models; up to +47 HP and +57 lbs. x ft. torque on 2.7L models.
• Four Preset Modes: Includes Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red) settings for on-the-fly adjustments.
• Dual Control Options: Operate the module via the included in-cabin LED tethered switch or remotely through the free smartphone app.
• Trace-Free Installation: Plug-and-play design leaves no footprint on the ECU, preserving factory diagnostic integrity.
• Bluetooth Connectivity: Bluetooth 4.0 allows for wireless mode switching, custom tuning, and firmware updates without routing wires through the firewall.
• Manufacturer Part Number: 77-83044

Fits 2024-2026 Mazda CX-70 and CX-90 models equipped with the L6-3.3L turbocharged engine.

The aFe POWER SCORCHER GT Module (MPN 77-47012) is a plug-and-play solution designed to increase turbo boost, providing immediate improvements in horsepower, torque, and throttle response. This module works by altering pressure sensor signals to optimize boost levels without modifying the factory ECU, ensuring no footprint is left behind. It is built for durability with a black powder-coated aluminum extrusion enclosure and high-quality wiring harnesses featuring factory-style connectors for a secure, 30-minute installation.

Control is at your fingertips with the included in-cabin LED light switch, allowing you to toggle through four power settings on the fly. Each setting is clearly indicated by the LED color: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red). This allows you to tailor your Mazda’s performance to match your driving conditions instantly.

• Quick and easy 30-minute plug-and-play installation requires no cutting or splicing
• Four adjustable power settings: Stock, Sport, Sport+, and Race
• Includes in-cabin LED switch for on-the-fly power adjustments
• High-quality aluminum extrusion black powder-coated casing for superior protection
• Uses OEM-style connectors to ensure a perfect fit and reliable connection
• 100% tested for reliability and performance
• Manufacturer Part Number: 77-47012

Fits select 2011-2026 Dodge Durango, Jeep Wrangler, Gladiator, and Grand Cherokee models equipped with the V6-3.6L engine.

The aFe POWER SCORCHER GT Power Module (77-46205) delivers immediate performance gains through a simple plug-and-play installation. By optimizing Manifold Absolute Pressure (MAP) and Intake Air Temperature (IAT) sensor signals, this module improves vehicle responsiveness and power delivery without modifying the factory ECU. The included LED light switch allows for in-cabin, on-the-fly adjustments, providing four distinct power modes to suit your driving conditions.

• Four Power Settings: Choose between Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red) at the touch of a button.
• Seamless Integration: Uses factory-style connectors for a secure, 30-minute installation with no cutting, splicing, or drilling required.
• No ECU Trace: This module does not leave a footprint on the factory ECU, maintaining the integrity of your vehicle's electronic records.
• High-Quality Build: Features a durable housing and a professional-grade wiring harness designed for the high-heat environment of the engine bay.

Each kit comes complete with the SCORCHER GT module, the vehicle-specific wiring harness, and the LED controller for immediate installation.

Fits 2016-2019 Nissan TITAN XD (V8-5.0L). This aFe POWER SCORCHER HD performance module is designed to optimize your diesel engine's output by safely increasing turbo boost and fuel pressure. Dyno-tested to produce gains of up to +60 horsepower and +100 lbs. x ft. of torque, this module significantly improves throttle response and towing performance without leaving a footprint on the factory ECU.

The system features a high-quality case and a dedicated wire harness equipped with factory-style connectors for a true plug-and-play installation that typically takes less than 30 minutes. An included in-cabin LED light switch allows for on-the-fly power adjustments between four distinct settings: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red).

• Performance: Verified gains of up to +60 HP and +100 lbs. x ft. torque
• Adjustability: 4-power settings adjustable via in-cabin LED switch
• Installation: Simple 30-minute plug-and-play setup using factory mounting locations
• Reliability: 100% of units are tested for high reliability
• Stealth: Leaves no trace on the ECU (no footprint)
• Compatibility: Works with other aFe POWER performance upgrades
• MPN: 77-46101

Fits select 2024-2026 Toyota Tacoma, Land Cruiser, and 2025-2026 4Runner models equipped with the L4-2.4L turbo engine.

The aFe POWER SCORCHER GT Power Module delivers a quick and effective boost in performance by altering pressure sensor signals to increase turbo boost. This results in significant improvements in throttle response and overall vehicle efficiency. Designed for enthusiasts who want adjustable power without permanent modifications, this module leaves no footprint on the factory ECU after removal.

The system features an in-cabin LED light switch, allowing for on-the-fly power adjustments across four distinct settings: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red). Built for durability, the module is housed in a black powder-coated aluminum extrusion enclosure and utilizes high-quality, factory-style connectors that plug directly into the OEM wiring harness for a secure, weather-tight fit.

• Manufacturer Part Number: 77-46015
• Power Settings: 4 adjustable modes (Stock, Sport, Sport+, Race)
• Control: In-cabin on-the-fly adjustment via LED button switch
• Construction: Black powder-coated extruded aluminum housing
• Installation: Plug-and-play setup, typically completed in 30 minutes
• Reliability: 100% tested for proper protection and performance
• ECU Safety: No trace or footprint left on the factory controller

Fits 2016-2023 Toyota Tacoma models equipped with the V6-3.5L engine.

The aFe POWER SCORCHER GT Power Module provides a fast and effective way to increase horsepower, torque, and throttle response by optimizing the Mass Air Flow (MAF) sensor signal. This plug-and-play unit is designed for the enthusiast who wants a performance boost without permanent modifications or complex tuning. The module is housed in a durable, black powder-coated aluminum extrusion enclosure and features an integrated ON/OFF button with a blue LED indicator to confirm the unit is powered and functioning.

Engineered for high reliability, 100% of these modules are tested for proper operation. The installation is straightforward, typically taking between 10 to 30 minutes, and utilizes factory-style connectors that plug directly into your stock wiring harness. Because it does not modify the ECU, it leaves no footprint, allowing the vehicle to be returned to stock configuration easily.

• Performance Optimization: Alters MAF signal to improve engine efficiency and throttle response.
• Plug & Play: Uses OEM-style connectors for a secure fit with no cutting or splicing required.
• No ECU Footprint: Leaves no trace on the factory computer once removed.
• Durable Construction: Black powder-coated aluminum housing for superior protection and heat dissipation.
• System Compatibility: Optimized for use with aFe POWER intake systems including the Takeda Momentum, Momentum GT, and Super Stock series.
• MPN: 77-46008

Vehicle Fitment:

• 2016-2023 Toyota Tacoma Limited
• 2016-2023 Toyota Tacoma SR
• 2016-2023 Toyota Tacoma SR5
• 2021 Toyota Tacoma Trail
• 2023 Toyota Tacoma Trail Special Edition
• 2016-2023 Toyota Tacoma TRD Off-Road
• 2017-2023 Toyota Tacoma TRD Pro
• 2016-2023 Toyota Tacoma TRD Sport