Fits select 2007-2024 Chevrolet Silverado 1500, Suburban, and GMC Sierra 1500, Yukon models.

Level the stance of your GM truck or SUV with the aFe CONTROL 2.0-inch front leveling kit. This kit is engineered to eliminate the factory "nose-down rake," providing a level profile while increasing front ground clearance for improved off-road performance and clearance for larger wheel and tire combinations.

Each spacer is precision CNC-machined from 6061 billet aluminum for maximum strength and a precise fit, finished in a durable red anodized coating for long-term corrosion resistance. The design allows for a straightforward bolt-on installation that can be completed with standard tools, as it requires no disassembly of the factory strut and spring assembly.

• Provides a 2.0-inch front lift to level vehicle stance
• CNC-machined from high-grade 6061 billet aluminum
• Durable red anodized finish for corrosion protection
• Easy bolt-in installation requires no modifications or strut disassembly
• Includes high-strength hardware for a secure installation

Fits 2025 RAM 1500 models.

The Zone Offroad Front Bumper Spacer Kit provides a clean, effective solution for clearing larger tires on the latest RAM 1500 platform. These spacers are designed to shift the front bumper slightly forward, creating the necessary clearance to accommodate oversized tire and wheel combinations that would otherwise rub against the bumper corners or plastic liners at full steering lock.

This kit is an essential addition for owners installing leveling kits or small lifts who want to maintain the factory aesthetic without resorting to aggressive trimming of the body or bumper. Constructed for maximum durability, the spacers bolt directly into place to ensure a secure fit and proper alignment of the front end components.

• Shifts front bumper forward to eliminate tire rub during articulation and turning
• Allows for the installation of larger tire diameters on 2025 RAM models
• Maintains factory body lines and structural integrity
• Direct bolt-on installation with included hardware
• Manufacturer Part Number: ZOND5802

Fits select 2020-2025 Chevrolet Silverado 2500/3500 HD and GMC Sierra 2500/3500 HD.

The Cognito 2.0 IFP (Internal Floating Piston) shock kit is engineered specifically for GM heavy-duty trucks to provide superior on-road comfort and off-road control. This set of front and rear shocks is designed exclusively for leveling applications using aftermarket upper control arms. The front shock length is optimized to increase down/droop travel by 35% while acting as the suspension droop limiter to prevent binding of tie rods, lower ball joints, and CV axles.

To ensure consistent damping performance under load, these shocks utilize high-pressure nitrogen and an Internal Floating Piston to separate the gas from the oil, eliminating the aeration common in twin-tube or non-gas charged shocks. The hard-anodized aluminum construction provides excellent heat dissipation and superior corrosion resistance for long-term durability in harsh environments.

• Fits 2020-2025 Chevrolet Silverado and GMC Sierra 2500/3500 HD
• Front shocks designed for leveling applications with aftermarket upper control arms
• Rear shocks accommodate stock height to 1-inch lift
• 35% increase in front droop travel over stock configurations
• Internal Floating Piston (IFP) prevents oil aeration
• Hard-anodized aluminum body, end cap, and seal head
• Rebuildable and vehicle-specifically valved for GM HD platforms
• Front shocks feature a vulcanized upper bar pin and bushing for OEM-quality mounting

Fits 2022-2025 Chevrolet Silverado 1500 ZR2 and GMC Sierra 1500 AT4X.

Level the stance of your high-performance half-ton with the Zone Offroad Adventure Series leveling kit. This 1.75-inch system is specifically engineered to improve the look and capability of the ZR2 and AT4X platforms without compromising ride quality or over-extending suspension components. The kit features a unique 3-piece design utilizing a top mount spacer combined with two preload spacers, allowing for increased ride height while maintaining proper droop travel limits.

A critical upgrade in this kit is the inclusion of Zone Adventure Series upper control arms. These heavy-duty UCAs provide increased strength and improved suspension geometry compared to factory arms, allowing for more travel and correcting the ball joint positioning for better longevity. For owners looking to fine-tune their stance, installing the kit without the thin preload spacer will net approximately 1-3/8" of lift on factory-equipped Trail Boss/AT4 suspensions.

• Provides 1.75" of lift for a level, aggressive stance
• Includes high-strength Adventure Series upper control arms for improved travel
• 3-piece design prevents over-extension during suspension droop
• Maintains factory ride quality and handling characteristics
• Accommodates 33" to 34" tires (backspacing requirements apply)
• Includes Factory Protection Plus drivetrain warranty
• MPN: ZONC1174

Fitment Notes: This system is not compatible with models equipped with Adaptive Ride Control (ARC). It has not been tested on 2022+ models equipped with Super Cruise. Maximum 5.5" backspacing is required to maintain clearance between the tire and the steering knuckle; tires wider than 295mm cannot be used on factory wheels.

Fits 2020-2025 Chevrolet Silverado and GMC Sierra 2500HD/3500HD (2WD/4WD) models.

The Cognito 110-P0779 Performance Ball Joint Leveling Kit is a comprehensive suspension solution designed to provide 3 inches of front lift while correcting critical geometry. Unlike basic spacer or key-only lifts, this kit replaces the factory upper control arms (UCAs) with Cognito SM Series arms. These boxed sheet metal components are MIG welded and finished in a semi-gloss black powder coat. By correcting the ball joint angle and increasing droop travel, Cognito ensures your truck maintains proper alignment and ride quality at the new ride height.

This kit includes forged torsion bar adjuster keys for a reliable lift and a full set of Fox 2.0 Performance Series IFP monotube shocks. These shocks utilize internal floating piston (IFP) technology to separate oil from high-pressure nitrogen gas, providing consistent damping and predictable handling on or off-road. The UCAs come pre-installed with maintenance-free ball joints and pivot bushings for a straightforward installation.

• Yields 3 inches of front lift to level vehicle stance
• Cognito Ball Joint SM Series Upper Control Arms for improved ball joint angles and increased droop travel
• Forged torsion bar adjuster keys for maximum durability
• Fox 2.0 Performance Series IFP front and rear monotube shocks
• Approximate 3.5-hour DIY installation time
• Engineered, manufactured, and assembled in the USA
• Manufacturer Part Number: 110-P0779

Fits select 2011-2024 Ford F-250 and F-350 Super Duty heavy-duty trucks.

Correct the factory rake and improve the stance of your Ford Super Duty with the Rancho Level-It system. This 2.5-inch leveling kit provides the necessary clearance to accommodate up to 35-inch tires while significantly upgrading front-end suspension performance. The system features application-specific coil springs and Rancho RS9000XL front shocks, which offer nine-position adjustable damping to fine-tune your ride quality for varying loads and terrain.

Engineered for a straightforward bolt-on installation, this kit includes essential geometry correction components such as alignment sleeves for caster adjustment, brake line drop brackets, and front bump stops. This ensures the suspension operates within functional tolerances even at the increased ride height. Note that aftermarket bumpers and winches may affect final lift height, and minor trimming is required to clear 35-inch wheel/tire combinations.

• Lift Height: 2.5-inch front leveling
• Shock Type: RS9000XL front shocks with 9-position damping control
• Components: Front coil springs, alignment sleeves, brake line drop brackets, and bump stops
• Max Tire Size: Up to 35-in (trimming required; tire dimensions vary by manufacturer)
• Installation: Bolt-on design; allows use of OE wheels and tires
• Manufacturer Part Number: RS66555R9

Fits 2019-2025 Ram 2500 4x4 Diesel models (excluding trucks equipped with factory rear air ride).

The Carli Pathfinder System is engineered as a comprehensive suspension solution that balances daily driving comfort with rugged off-road capability. At the heart of this system are the Carli-Spec 2.5-inch shocks, which are specifically tuned to provide superior cooling and damping control compared to standard leveling kits. These shocks feature a durable gray hardcoat finish for maximum corrosion resistance and longevity in harsh environments.

This system replaces the harsh factory front-end components with premium hardware designed for improved articulation and stability. The included soft-ride coil springs eliminate the stiff factory ride, while the adjustable track bar allows you to perfectly center the front axle after leveling the vehicle.

• Carli-Spec 2.5-inch Pathfinder shock package with gray hardcoat finish
• Carli soft-ride front coil springs for improved comfort
• Adjustable track bar for precise axle alignment
• Maintains stability and control during towing and hauling
• Bolt-on installation to factory mounting points
• Manufacturer Part Number: CS-DLVL-PF-19-D-2500

Fits 2005-2020 Toyota Tacoma (Base, Limited, SR, SR5, TRD Off-Road, TRD Pro, and TRD Sport).

Level the stance of your Toyota Tacoma and create clearance for larger tires with the Zone Offroad 2.5-inch leveling kit. This kit is engineered to eliminate the factory nose-down rake, providing enough room to run 265/75 tires. The spacers are designed as a top-mount solution, which means you can achieve the desired lift height without the need for strut disassembly or a coil compressor. This design maintains the factory ride quality and spring rate for a smooth on-road experience.

• Provides 2.5 inches of front lift to level the vehicle
• Top-mounted design preserves factory strut performance and ride quality
• Easy bolt-on installation with no strut disassembly required
• Clears up to 265/75 tires
• Heavy-duty construction with all necessary hardware included
• Manufacturer Part Number: ZONT1251

Fits 2018-2024 Jeep Wrangler JL models.

This 2-inch spacer lift kit from Zone Offroad provides a reliable way to increase ground clearance and make room for larger tires without sacrificing factory ride quality. Designed specifically for the Wrangler JL platform, this kit utilizes heavy-duty coil spacers that mount to the factory spring seats to provide a consistent lift height and level the vehicle's stance.

The ZONJ2204 kit is an ideal solution for Jeep owners looking to improve off-road capability while maintaining the original suspension geometry and comfort. The bolt-on design ensures a straightforward installation process that does not require cutting or welding.

• 2-inch lift height for improved approach and departure angles
• Heavy-duty spacers designed for long-term durability
• Retains factory coil springs to preserve OE ride quality
• Simple bolt-on installation using factory mounting points
• Manufacturer Part Number: ZONJ2204

Fits 2024-2025 Toyota Tacoma (SR, SR5, Limited, and TRD models).

The Skyjacker TC2420MS 2-inch front strut spacer kit provides a leveled stance and increased ground clearance for the redesigned Tacoma platform. These spacers are engineered to maintain factory suspension geometry, ensuring the Electronic Stability Control (ESC) and CV axles operate within OEM tolerances. The 1-piece top-mount design features built-in camber offsets to optimize ball joint angles and facilitate a proper alignment after installation.

Constructed using precise CNC laser-cut steel, each spacer utilizes a tab-and-slot interlocked design for maximum structural integrity. The components are finished in a durable powder coating to resist corrosion in harsh off-road environments. This kit is a direct bolt-on solution that requires no cutting or drilling, preserving the integrity of your factory components while providing room for up to 285/70R17 tires (with proper wheel offset).

• 2-inch front lift height for a leveled stance
• CNC laser-cut steel with tab-and-slot interlocked design
• Integrated camber correction for optimized ball joint angles
• Includes front strut spacers, preload spacers, and high-quality mounting hardware
• Direct bolt-on installation; no cutting or drilling required
• Corrosion-resistant powder-coated finish
• Maintains factory ride quality and ESC system parameters
• Manufacturer Part Number: TC2420MS

Fits 2014-2024 Ram 2500 4WD trucks. The Synergy Manufacturing Leveling System (MPN 8750-10) is engineered to eliminate the factory nose-down rake, providing a level stance and the necessary clearance for larger tire and wheel combinations.

This system is designed as a direct-fit solution that maintains optimal suspension geometry and factory ride quality. By lifting the front of the vehicle, it improves approach angles and aesthetics without compromising the truck's heavy-duty towing and hauling capabilities. Every component is built to withstand the rigors of off-road use while ensuring reliable on-road performance.

• Corrects factory rake for a balanced, level appearance
• Provides increased clearance for larger tires and wheels
• Engineered to maintain OE ride quality and suspension travel
• Direct-fit installation for 2014+ Ram 2500 4WD models
• Manufacturer Part Number: 8750-10

Fine-tune your vehicle's ride height or compensate for sagging suspension with the KW Universal 30mm Spring Spacer. This precision-engineered component provides a fixed 30mm lift, allowing for improved ground clearance or chassis leveling when using coil spring setups.

Constructed from high-grade aluminum, this spacer is built to withstand the constant compression loads of a suspension system while offering superior resistance to corrosion and wear. Its universal design makes it a versatile solution for custom suspension tuning and specialized height adjustments.

• Spacer Height: 30mm
• Material: High-strength aluminum
• Fitment: Universal application for coil springs
• Manufacturer Part Number: 65030046

Fits select 2021-2025 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, and SSV.

This Zone Offroad 2-inch leveling kit (MPN ZONF1205) utilizes a unique combination of top-mounted strut spacers and preload spacers to achieve lift without overextending the suspension during droop travel. This dual-spacer design maintains factory ride quality and handling characteristics while providing the necessary clearance for larger wheel and tire combinations.

• Specifically engineered for 2021-2025 Ford F-150 models (fits EcoBoost and Diesel)
• Combination of top-mounted strut spacers and preload spacers for proper geometry
• Retains factory ride quality and steering feel
• Bolt-on installation allows the vehicle to be returned to stock if necessary
• Provides clearance for larger aftermarket tires
• Includes Factory Protection Plus Program

Fitment and Installation Notes: Does not fit Tremor models or trucks equipped with Continuous Controlled Damping (CCD). Compatibility with Ford BlueCruise has not been tested. A strut compressor is required for installation. For trucks with a 2-piece driveshaft, Zone recommends completing Ford Safety Recall 21S25 prior to installing this kit.

Fits 2022 Ford Maverick AWD Lariat, XL, and XLT models.

Level the stance of your truck with the Zone Offroad 1-inch front leveling kit. Designed specifically for the AWD Ford Maverick, this kit uses top-mount strut spacers to provide 1 inch of lift, eliminating the factory rake and creating clearance for up to 245/65R17 or 245/60R18 tires. These spacers are engineered to maintain factory ride quality and upper strut bushing function while managing CV angles for long-term reliability.

Each spacer is manufactured from high-strength American steel, laser-cut for a precise fit, and finished in a durable black textured powder coat. The bolt-on design allows for a clean installation that does not require disassembly of the factory strut assembly.

• Provides 1-inch of front lift to level the vehicle stance
• High-strength laser-cut American steel construction
• Clears up to 245/65R17 or 245/60R18 tires
• No-disassembly installation maintains factory strut integrity
• Durable black textured powder coat finish
• Preserves factory ride quality and bushing geometry
• Manufacturer Part Number: ZONF1104

Fits select 2005-2024 Nissan Frontier, 2005-2015 Nissan Xterra, and 2011-2013 Nissan Titan (2WD & 4WD) models.

The Tuff Country 52009 leveling kit is designed to eliminate the factory rake on your Nissan truck or SUV, providing 2 inches of front lift to level the vehicle's stance. This kit is specifically engineered for a straightforward installation that does not require strut disassembly or the use of a coil spring compressor, making it an ideal choice for DIY mechanics and professional shops alike. By raising the front end, this kit creates additional clearance for larger tires while maintaining the original equipment (OE) ride quality and handling characteristics.

• Provides 2 inches of front lift to level vehicle stance
• Simple installation with no strut disassembly or spring compressor required
• Maintains factory ride quality and suspension geometry
• Compatible with factory shocks and struts; no replacements required
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: 52009
• Finish: Durable coating for corrosion resistance
• Application: Front suspension leveling

Fits select 2007-2024 Chevrolet Silverado, Tahoe, Suburban, and GMC Sierra, Yukon 1500 models.

Level the stance of your GM 1500 truck or SUV with the Tuff Country EZ-Ride 2-inch front leveling kit. Designed for both 4x4 and 2WD applications, this kit utilizes top-mount strut spacers that install above the factory coil assemblies. Because the spacers do not add any additional pre-load to the factory coil springs, the vehicle maintains its original ride quality and suspension geometry.

This kit is an ideal solution for owners looking to clear slightly larger tires (up to 285/70R) without the complexity of a full suspension lift. The bolt-on design ensures a straightforward installation process that requires no strut disassembly and does not necessitate the purchase of new shocks or struts.

• Provides 2 inches of front lift to level the vehicle
• No strut disassembly or coil spring compression required
• Maintains near-factory ride quality by preserving spring pre-load
• Allows for tire sizes up to 285/70R
• Includes (2) coil/strut spacers and all necessary mounting hardware
• Manufacturer Part Number: 12000

Fits select 2017-2026 Ford F-250 and F-350 Super Duty 4WD models.

Correct the factory nose-down rake of your Ford Super Duty with the Fabtech 2" Leveling System. Designed specifically for 4WD applications, this kit provides additional front-end lift to accommodate larger tires and wheels while maintaining a factory-quality ride. Fabtech engineers these systems to ensure they do not cause ball joint, tie rod, or steering bind, even at the full height of the lift.

Built for durability, the kit utilizes high-strength 1/4-inch thick steel and aircraft-grade billet aluminum components. All steel parts are finished in a heavy-duty powder coating to resist corrosion in harsh environments. This system also qualifies for Fabtech’s 5-year / 60,000-mile powertrain warranty and their unique Trade Up program, allowing you to credit the cost of this kit toward a full Fabtech suspension system in the future.

• Provides 2 inches of front lift for a level stance
• Constructed from 1/4" thick steel and aircraft-grade billet aluminum
• Powdercoated finish for maximum corrosion resistance
• Includes high-grade installation hardware
• Engineered to prevent steering and ball joint bind
• Manufacturer Part Number: FTL5208
• Includes Fabtech's 5-Year / 60,000-Mile Powertrain Warranty

Fits 2017-2024 Ford F-450 Super Duty models.

The Cognito 2-inch Performance Leveling Kit levels the stance of your Ford F-450 while significantly improving ride quality over factory components. This system replaces the OEM single-rate springs with dual-rate progressive coil springs, providing a softer initial ride that firms up as it compresses. To address the lateral axle shift common when lifting solid-axle trucks, Cognito includes a heavy-duty adjustable track bar to re-center the front axle under the frame at ride height.

Suspension damping is managed by a complete set of Fox 2.0 Performance Series IFP monotube shocks, which offer superior heat dissipation and control compared to stock shocks. This kit provides the clearance needed to fit up to 37-inch tires and includes bump stop spacers to maintain proper bottom-out protection while preserving adequate droop travel.

• 2-inch front lift height
• Fox 2.0 Performance Series IFP monotube front and rear shocks
• Dual-rate progressive coil springs for improved ride quality
• Heavy-duty adjustable track bar for precise axle alignment
• Bump stop spacers for bottom-out protection
• Maintains factory droop travel specifications
• Approximate 4-hour DIY installation time
• Made in the USA
• Manufacturer Part Number: 220-P1217

Fits select 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 2WD/4WD models. This includes Denali, Trail Boss, and ZR2 trims.

The Cognito 110-90795 Economy Leveling Lift Kit provides a 2-inch front lift and 1-inch rear lift to eliminate the factory nose-down rake while maintaining adequate droop travel for superior ride quality. Engineered and manufactured in the USA, this kit is designed to utilize the truck's factory upper control arms while providing the clearance needed for larger wheel and tire combinations.

This comprehensive bundle features heavy-duty steel spacers finished in a durable semi-gloss black powder coating. The kit includes 0.75-inch strut spacers, 0.5-inch steel preload spacers, and 1-inch rear blocks paired with heavy-duty zinc-plated U-bolts for a complete installation solution.

• Yields 2 inches of front lift and 1 inch of rear lift
• Includes 0.75-inch strut spacers and 0.5-inch preload spacers
• Cognito 1-inch powder-coated steel block and U-bolt kit included
• Maintains adequate droop travel for OE-style ride quality
• Compatible with factory upper control arms
• Fits up to 33 x 11.5-inch tire on a 9-inch wide wheel (5.75-inch backspacing)
• 3-hour estimated DIY installation time
• Warning: Not compatible with trucks equipped with composite mono-leaf rear springs
• Manufacturer Part Number: 110-90795
• Made in the USA

Fits 2005+ Toyota Tacoma models. This Borne Off-Road Front 2-Inch Leveling Kit (BNLK-TACO-05-F2) provides the necessary lift to eliminate the factory rake, giving your truck a more aggressive, level stance and additional clearance for larger wheel and tire packages.

• Provides 2 inches of front lift to achieve a level vehicle profile
• Engineered specifically for the 2005+ Toyota Tacoma chassis
• Corrects the factory nose-down rake for improved aesthetics and clearance
• Designed for straightforward installation to factory mounting points
• Manufacturer Part Number: BNLK-TACO-05-F2

Fits 1997-2013 Ford F-150 models including XL, XLT, Lariat, King Ranch, FX4, STX, and SVT Raptor.

When lifting a Ford F-150, the increased distance between the transfer case and the rear axle can pull the driveshaft slip yoke too far out of the tail shaft. This Zone Offroad 3/4-inch rear driveshaft spacer is engineered to restore proper engagement, significantly reducing the risk of vibration, premature u-joint wear, or slip yoke failure. This precision-machined component offers a cost-effective alternative to ordering a custom-length driveshaft for lifted applications.

• Constructed from high-strength 6061 T-6 aluminum for long-term durability and corrosion resistance
• CNC-machined for a precise fitment and balanced rotation
• 3/4" thickness designed to maintain optimal tail shaft engagement on lifted trucks
• Includes all necessary high-grade installation hardware
• Manufacturer Part Number: ZONF5601

Fits 2021 Ford Bronco models. This Zone Offroad 1-inch leveling kit (MPN ZONF1102) is engineered to level the stance of your vehicle by eliminating the factory nose-down rake. This modest lift provides additional ground clearance and allows for the fitment of larger tire and wheel combinations while maintaining the original factory ride quality and suspension geometry.

Designed for durability and precise fitment, the kit utilizes high-strength spacers that integrate seamlessly with the factory strut assemblies. This bolt-on solution requires no permanent modifications, making it an ideal choice for owners looking to enhance their Bronco's profile and off-road capability without overcomplicating the suspension system.

• Lift Height: 1.0 Inch
• Application: Front suspension leveling
• Manufacturer Part Number: ZONF1102
• Installation: Direct bolt-on with included hardware
• Finish: Corrosion-resistant coating for long-term durability

Fits 2019-2025 Chevrolet Silverado 1500 and 2019-2023 GMC Sierra 1500 4WD models. This system is compatible with ARC (Adaptive Ride Control) equipped trucks but has not been tested on ZR2, AT4X, or models equipped with Super Cruise.

Level the stance of your GM 1500 without compromising factory ride quality or suspension geometry. The Zone Offroad ZONC1241 kit provides 2 inches of front lift to clear up to 295/70R17 tires while addressing a common weak point: the factory upper control arms. These heavy-duty replacement arms are designed to maintain a proper range of motion for the ball joints at increased ride heights, preventing premature wear and binding during suspension travel.

Each kit includes optional weld-on steering stop extensions for the lower control arms to resolve tight clearance issues with specific tire/wheel combinations. Note that stock wheels and tires require 1/4-inch wheel spacers to ensure adequate clearance from the upper ball joint and control arm during turns.

• Manufacturer Part Number: ZONC1241
• Lift Height: 2 Inches
• Includes heavy-duty Upper Control Arms (UCAs)
• High-strength Grade 8 mounting hardware included
• Long-term corrosion-resistant finish
• Optional weld-on steering stop extensions included
• Compatible with ARC (Adaptive Ride Control)

Tire & Wheel Fitment:
295/70R17 - Stock Wheel
295/65R18 - Stock Wheel
295/60R20 - Stock Wheel
285/60R20 - 5" Backspacing

Fits 2014-2019 Cadillac Escalade/ESV, Chevrolet Silverado 1500/Tahoe, and GMC Sierra 1500/Yukon/XL models equipped with MagneRide.

Level the stance of your truck or SUV while maintaining the sophisticated ride quality of your electronic suspension. The Zone Offroad 2-inch leveling kit (ZONC1221) is specifically engineered to accommodate the MagneRide system, utilizing lower strut spacers that bolt directly to factory mounting points. Unlike generic kits that can interfere with electronic dampening, this solution includes dedicated sensor relocation brackets to keep the MagneRide system within its intended operating range.

By raising the front end, this kit provides clearance for up to 34-inch tires while correcting the factory rake. The heavy-duty hardware and precision-fit spacers ensure a straightforward installation that preserves OE ride characteristics and suspension travel.

• Maintains full MagneRide system functionality with included relocation brackets
• Provides 2 inches of lift for a level stance and increased ground clearance
• Clearance for up to 34-inch tire and wheel combinations
• Direct-fit lower strut spacers and high-grade mounting hardware
• Retains factory ride quality and handling performance
• Manufacturer Part Number: ZONC1221

Fits 2015-2022 Chevrolet Colorado and GMC Canyon (all models including ZR2 and AT4).

Level the stance of your mid-size truck with the Zone Offroad 1.25-inch top-mounted strut spacer leveling kit. This system is engineered to eliminate the factory rake, providing a level profile and increased ground clearance for up to 32-inch tires. Constructed from precision laser-cut steel and finished in a durable black e-coat, these spacers are built to resist corrosion and withstand heavy-duty use.

Designed for a straightforward installation, this kit is completely bolt-on and requires no strut disassembly or coil spring compression. By mounting to the top of the factory strut, it maintains the original ride quality and suspension geometry while providing the necessary lift for a more aggressive look and larger wheel/tire combinations.

• Lift Height: 1.25 inches
• Material: Precision laser-cut steel
• Finish: Black e-coated for superior corrosion protection
• Max Tire Size: 32 inches
• Installation: 100% bolt-on; no strut disassembly required
• Included: (2) Strut spacers and all required mounting hardware
• Manufacturer Part Number: ZONC1121
• Warranty: Limited Lifetime Warranty

Fits 2024 Toyota Tacoma and 2024 Toyota Land Cruiser models.

The Tuff Country 52924 1.5-inch front leveling kit is engineered to eliminate the factory rake of the 2024 Toyota Tacoma and Land Cruiser, providing a level stance and extra clearance for larger tire fitment. This kit addresses the common issue of excessive dive and roll during cornering, improving overall handling characteristics while maintaining the original equipment ride quality.

Each spacer is constructed from high-strength 1/4-inch steel and finished with a durable black powder-coat for maximum corrosion resistance. Designed for a straightforward installation, this kit features a simple bolt-on design that retains the factory front and rear struts. Unlike many other lift options, this system requires no strut disassembly, significantly reducing install time and complexity.

• Lift Height: 1.5 inches (Front)
• Material: Precision-fabricated 1/4-inch steel
• Finish: Durable black powder-coat
• Installation: Bolt-on; no strut disassembly required
• Components: Front leveling spacers and necessary hardware
• Manufacturing: Proudly Made in the USA
• Warranty: Limited Lifetime Warranty
• Manufacturer Part Number: 52924

Fits 2022-2024 Toyota Tundra and 2023-2024 Toyota Sequoia models including SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro.

Achieve a level stance and clear larger tires on your Toyota truck or SUV with this Tuff Country 2-inch front leveling kit. Designed to eliminate the factory rake, this kit provides additional ground clearance while maintaining the factory ride quality. The system is engineered for a simple bolt-on installation that retains the factory front and rear struts without requiring complex strut disassembly.

Constructed from high-strength 0.25-inch steel and finished in a durable black powder coat, this leveling kit is built to withstand off-road use and harsh weather conditions. By leveling the front suspension, this kit also helps reduce excessive nose-dive during braking and body roll during cornering.

• Manufacturer Part Number: 52220
• Lift Height: 2.0 inches (Front)
• Material: 0.25-inch plate steel
• Finish: Black Powder-Coat
• Installation: Simple bolt-on; no strut disassembly required
• Warranty: Limited Lifetime Warranty
• Country of Origin: Made in the USA

Fits 2004-2022 Nissan Titan and 2016-2020 Nissan Titan XD (2WD/4WD).

Achieve a level stance and eliminate factory rake with the Tuff Country 52008 1.5-inch front leveling kit. These spacers are engineered to mount directly above the factory coilover assemblies, providing a clean lift without the need for complex strut disassembly or coil spring compression. This design ensures that your Nissan maintains its original ride quality and handling characteristics.

Each spacer is manufactured in the USA from high-grade steel and finished with a durable powder coat to resist corrosion and road debris. Since the kit is designed to work within the parameters of the original suspension geometry, you can retain your factory front shocks and struts, making this an efficient and cost-effective solution for increasing ground clearance and fitting larger tire packages.

• Provides 1.5 inches of front lift to level the vehicle with the rear
• Maintains factory ride quality and suspension feel
• Bolt-on installation mounts above factory struts (no disassembly required)
• Durable powder-coated steel construction
• Compatible with original equipment shocks and struts
• Proudly manufactured in the USA
• Manufacturer Part Number: 52008

Fits select 2013-2024 Ram 2500 and 3500 4WD models. This Tuff Country front leveling kit provides a 2-inch lift to eliminate the factory rake, bringing the front end of your truck level with the rear for an aggressive stance and improved ground clearance.

Designed to maintain your vehicle's factory ride quality, this kit (MPN 32909) features front shock extension brackets. These brackets allow you to retain your original equipment (OE) shocks or struts, eliminating the immediate need for aftermarket replacements. The coil spacers are engineered for a precise fit and straightforward installation on heavy-duty Ram suspension systems.

• Raises the front of the vehicle 2 inches for a level stance
• Includes front shock extension brackets to reuse factory shocks
• Maintains factory ride quality and handling characteristics
• Bolts directly to factory mounting points
• Manufacturer Part Number: 32909

Note: Not compatible with models equipped with factory rear air suspension.

Fits 2019-2024 Ram 1500.

Level the stance of your truck and gain additional tire clearance with the Tuff Country 2-inch front leveling kit. Engineered specifically for the 2019-2024 Ram 1500, this kit (MPN 32907) includes specialized ride height sensor links to maintain proper suspension geometry and electronic system calibration. The bolt-on design allows for a straightforward installation that requires no strut disassembly, cutting, or drilling, ensuring your factory front and rear struts are retained for original equipment ride quality.

• Provides 2 inches of front lift to eliminate factory rake
• Includes ride height sensor links for proper suspension integration
• Simple bolt-on installation with no strut disassembly required
• Maintains factory ride characteristics and retains OE struts
• Allows for the use of up to 33 in. x 12.5 in. tires
• No cutting or drilling required for installation
• Manufacturer Part Number: 32907
• Proudly made in the USA
• Backed by a Limited Lifetime Warranty