Vibrant Performance 45-degree silicone elbows are designed for high-performance plumbing in congested engine bays where space is at a premium. These connectors feature a tight-radius bend and are constructed with high-temperature resistant aramid reinforcement fabric between four layers of silicone, ensuring the hose withstands heavy-duty pressure and extreme thermal cycling without swelling or bursting.

• Inner Diameter: 1.000 in.
• Leg Lengths: 8.000 in.
• Construction: 4-ply aramid reinforced silicone
• Operating Temperature: -75°F to 392°F (-60°C to 200°C)
• Standards: Meets or exceeds SAE J20 specifications
• Resistances: UV and Ozone resistant
• Compatibility: Suitable for water, coolant, and air service only (not for fuel or oil)

The GReddy AN10 90-degree swivel hose end is engineered for high-performance fluid transfer systems where space and reliability are critical. This reusable fitting features a swivel head that allows for easy alignment after the hose has been assembled, ensuring a clean and precise installation in tight engine bays.

• Size: AN10 (10AN)
• Angle: 90 Degree
• Finish: Dual-tone Black/Gold Anodized
• Material: High-grade Aluminum
• Function: Swivel head for post-assembly orientation and alignment

Constructed from lightweight aluminum with a durable black and gold anodized finish for corrosion resistance, this hose end is designed for use with compatible stainless steel or nylon braided hoses in fuel, oil, and cooling system applications.

This Mishimoto 90-degree silicone reducer coupler provides a heavy-duty transition for custom intake, intercooler, or coolant plumbing. Designed for high-pressure and high-temperature environments, this coupler facilitates a smooth 2.75-inch to 3-inch step-up (or step-down) while navigating tight 90-degree bends in the engine bay.

Constructed with four layers of high-grade silicone and reinforced with embedded heat-resistant fibers, this coupler maintains structural integrity under significant boost levels. It is an ideal solution for fabricators and enthusiasts looking to route complex piping with a component that resists heat soak and pressure deformation better than standard rubber hoses.

• Transitions from 2.75" to 3" diameter at a 90-degree bend
• 4-ply silicone construction with heat-resistant embedded fibers for maximum durability
• Rated for temperatures up to 330°F (165.5°C)
• Suitable for use in both coolant and forced induction air systems
• Manufacturer Part Number: MMCP-R90-27530BK
• Includes Mishimoto Lifetime Warranty

The Ticon Industries 4.0-inch straight silicone coupler is engineered for demanding high-performance automotive plumbing, including turbocharger charge pipes, intercooler piping, and intake systems. Featuring 4-ply reinforced construction, this coupler offers superior durability and pressure resistance compared to standard silicone hoses, preventing swelling or collapse under high boost and extreme thermal loads.

• Inner Diameter: 4.0in (102mm)
• Configuration: Straight Coupler
• Reinforcement: 4-Ply High-Temperature Silicone
• Color: Black
• Manufacturer Part Number: 131-10203-0401

Designed for professional-grade fabrication, this Ticon silicone coupler provides a secure, leak-free connection when used with high-quality T-bolt clamps.

Fits 2020-2024 Toyota GR Yaris models.

Optimize your induction system with the do88 Turbo Inlet Hose, specifically engineered to eliminate the flow restrictions found in the factory intake tract. This hose replaces the OEM corrugated unit with a smooth-bore, multi-layer silicone design that reduces air turbulence and improves turbocharger spool-up. To ensure reliability under high vacuum, the hose is wire-reinforced to prevent wall collapse, making it an essential upgrade for both stock and tuned G16E-GTS engines.

• Precision-molded silicone construction for superior heat resistance and durability
• Wire-reinforced walls maintain structural integrity under high boost and vacuum
• Smooth internal profile reduces pressure drop and maximizes air velocity
• Direct bolt-on replacement for the factory hose with no modifications required
• Manufacturer Part Number: DO88-KIT218S

Fits 2020+ Porsche 911 Turbo and Turbo S (992).

Optimize your vehicle's induction system with the do88 Turbo Inlet Hose kit. These high-flow hoses are designed to replace the restrictive factory components on the 992-generation Porsche 911 Turbo, providing a smoother, less turbulent path for air to reach the turbochargers. By reducing intake restriction, this kit allows the engine to breathe more efficiently, supporting increased performance and improved throttle response across the RPM range.

• Direct replacement for the OEM turbo inlet hoses
• Engineered to maximize internal volume and airflow efficiency
• Durable construction designed to withstand high vacuum and engine bay temperatures
• Essential upgrade for tuned vehicles or those seeking optimized induction
• Manufacturer Part Number: DO88-KIT212ST-TT-66

Engineered for high-performance plumbing in cramped engine bays, the Vibrant Performance 90-degree silicone elbow features a tight radius bend to maximize clearance without sacrificing flow. This 1.625-inch ID coupler is constructed with multiple layers of premium silicone and high-temperature resistant aramid reinforcement fabric for exceptional structural integrity under pressure.

This elbow is purpose-built for air, water, and coolant service, offering a wide operating temperature range that makes it ideal for forced induction charge pipes and cooling system routing. Please note: This part is not suitable for fuel or oil transfer.

• Inner Diameter: 1.625 in
• Leg Length: 5.00 in
• Operating Temperature: -75°F to 392°F (-60°C to 200°C)
• Material: Aramid-reinforced silicone
• Compatibility: Suitable for Water, Coolant, and Air service
• Manufacturer Part Number: 27925

Engineered for high-temperature and high-pressure automotive plumbing, this Vibrant Performance Aramid Reinforced Silicone Straight Hose Coupler is designed to bridge connections between turbo compressor housings, intercooler end tanks, and custom charge pipe assemblies. The 12-inch length provides ample material for custom fabrication or replacing long sections of worn factory coolant or intake hose.

Unlike standard silicone hoses, this coupler features a 4-ply Aramid reinforcement fabric layered between the silicone. This construction allows for a massive operating temperature range and superior resistance to expansion under boost pressure. It is specifically designed for air, water, and coolant service; please note it is not suitable for fuel or oil transfer.

• Manufacturer Part Number: 27380
• Inside Diameter: 3.125 in (approx. 79.4mm)
• Length: 12.00 in
• Wall Construction: 4-Ply Aramid Reinforced Silicone
• Temperature Rating: -75°F to 392°F (-60°C to 200°C)
• Finish: Gloss Black
• Application: Suitable for water, coolant, and air service

This Ticon Industries straight silicone coupler is engineered for high-performance forced induction and custom intake applications. Featuring a heavy-duty 4-ply construction, this coupler provides superior pressure resistance and durability compared to standard silicone, ensuring reliable seals in high-boost environments.

The 131-12703-0401 coupler is designed with a 5.0-inch inner diameter to accommodate large-bore piping and components. Its multi-layer reinforcement prevents expansion and wall collapse under extreme thermal and pressure cycles, making it an essential component for intercooler systems and turbocharger plumbing where reliability is non-negotiable.

• Material: Multi-layer reinforced silicone
• Construction: 4-Ply reinforcement
• Inside Diameter: 5.0 inches (127mm)
• Style: Straight
• Color: Black
• Manufacturer Part Number: 131-12703-0401

The Ticon Industries 131-07603-0401 is a professional-grade 3.0-inch straight silicone coupler engineered for high-performance automotive intake and intercooler systems. Constructed from 4-ply reinforced silicone, this coupler provides the structural integrity needed to handle increased boost pressures and high engine bay temperatures without collapsing or swelling.

This coupler is designed to bridge connections between hard piping, offering enough flexibility to dampen engine vibration and simplify the assembly of custom charge pipes. The black finish ensures a clean, understated aesthetic that complements any engine bay configuration.

• Inner Diameter: 3.0" (76mm)
• Construction: 4-Ply reinforced silicone for superior pressure resistance
• Type: Straight connection
• Finish: High-temperature resistant black
• Manufacturer Part Number: 131-07603-0401

The Ticon Industries 2.75-inch straight silicone coupler is a high-performance connector designed for forced induction and custom intake systems. Constructed with 4-ply reinforcement, this coupler provides the structural integrity needed to withstand high boost pressures and elevated engine bay temperatures while maintaining a flexible, vibration-dampening seal between rigid piping.

This component is an essential link for intercooler plumbing, turbocharger inlets, and cold air intakes where reliability and pressure retention are critical. The smooth interior bore minimizes turbulence, ensuring optimal airflow throughout the intake tract.

• Inner Diameter: 2.75 inches
• Construction: 4-Ply reinforced silicone
• Configuration: Straight
• Color: Black
• Manufacturer Part Number: 131-07003-0401

The Ticon Industries 4-ply silicone reducer provides a high-strength, heat-resistant transition for plumbing intake and intercooler systems. Engineered to bridge the gap between 2.5-inch and 3.0-inch piping, this coupler utilizes multi-layer reinforced construction to withstand significant boost pressures and thermal cycling without collapsing or expanding.

Designed for professional-grade fabrication, it offers the flexibility needed to absorb engine vibration and minor misalignment while maintaining a leak-proof seal. The black finish provides a clean, understated look for custom engine bay plumbing.

• Inlet ID: 2.5 inch
• Outlet ID: 3.0 inch
• Construction: 4-Ply reinforced silicone
• Color: Black
• Manufacturer Part Number: 131-06376-3401

This Ticon Industries high-temperature silicone reducer is engineered for demanding automotive plumbing applications, including turbocharger discharge, intercooler piping, and intake tracts. Constructed with 4-ply reinforcement, this coupler is built to withstand high boost pressures and elevated under-hood temperatures without expanding or collapsing under vacuum.

• Inner Diameter 1: 2.5 inches
• Inner Diameter 2: 2.75 inches
• Construction: 4-Ply Reinforced Silicone
• Finish: Black
• Application: High-Temperature / High-Pressure Intake and Boost Systems
• Manufacturer Part Number: 131-06370-3401

The multi-layer reinforced wall provides superior structural integrity compared to standard silicone hoses, ensuring a secure, leak-free connection when used with appropriate T-bolt or constant-tension clamps. Its 2.5-inch to 2.75-inch transition allows for a clean diameter change in custom plumbing setups.

The Ticon Industries 131-05063-3401 is a high-performance 4-ply silicone reducer designed for reliable transitions in custom intake and charge pipe plumbing. This coupler allows for a secure connection between 2.0-inch and 2.5-inch outer diameter tubing, making it an essential component for turbocharger compressor outlets, intercooler piping, and induction systems.

• 4-ply reinforced silicone construction provides superior burst strength and durability under high-boost conditions.
• Precision-molded 2.0" (51mm) to 2.5" (63mm) inner diameter transition for optimal fitment.
• Heat-resistant material maintains structural integrity in high-temperature engine bay environments.
• Smooth internal bore minimizes turbulence to ensure efficient airflow.
• Sleek black finish for a clean, professional look that integrates with factory or aftermarket setups.
• Manufacturer Part Number: 131-05063-3401

This Ticon Industries heavy-duty straight silicone coupler is engineered for high-performance plumbing applications. Featuring 4-ply reinforcement, this coupler provides the durability and temperature resistance necessary for turbocharger compressor outlets, intercooler piping, and intake systems where standard rubber hoses would fail under heat or pressure.

• Manufacturer Part Number: 131-04503-0401
• Internal Diameter: 1.75 inches (45mm)
• Construction: 4-Ply reinforced silicone
• Finish: Heat-resistant black silicone
• Type: Straight coupler for custom fabrication

The thick wall construction resists collapse under vacuum and expansion under boost, ensuring consistent airflow and a secure seal when used with appropriate T-bolt or worm gear clamps.

This Ticon Industries straight silicone coupler is engineered for high-performance intake and charge piping applications where reliability under pressure is critical. Featuring a 4-ply reinforced construction, this 1.5-inch coupler provides superior heat resistance and structural integrity compared to standard single-layer hoses, making it ideal for turbocharger and intercooler plumbing.

• Inner Diameter: 1.5 inches
• Construction: 4-ply reinforced silicone
• Style: Straight
• Color: Black
• Manufacturer Part Number: 131-03803-0401

The Vibrant Performance 19668 180-degree silicone elbow is engineered for high-performance forced induction and cooling systems. Constructed with 4-ply aramid reinforcement fabric layered between premium silicone, this coupler is designed to maintain structural integrity under boost and high thermal stress.

This aramid-reinforced hose provides an exceptional operating temperature range, making it suitable for demanding engine bay environments. It features a 3-inch inner diameter and consistent 4.25-inch leg lengths for secure clamping and routing. Note: This component is not suitable for use with oil or fuel.

• Manufacturer Part Number: 19668
• Construction: 4-Ply Aramid Reinforced Silicone
• Angle: 180 Degree U-Bend
• Inside Diameter: 3.00 in (76.2 mm)
• Leg Length: 4.25 in
• Operating Temperature: -75°F to 392°F (-60°C to 200°C)
• Finish: Black

Fits 2005-2017 Subaru Impreza WRX, WRX, and Legacy GT.

The Torque Solution Throttle Body Hose (TS-SU-014) is an essential upgrade for maintaining a secure, leak-free connection between the intercooler and the throttle body. Designed as a direct replacement for the factory unit, this hose is built to withstand the rigors of forced induction, preventing the expansion and boost leaks often associated with aging original equipment rubber components.

• Direct replacement for factory throttle body hose
• Ensures a secure intercooler-to-throttle body seal
• Compatible with select 2005-2017 WRX and Legacy GT models
• Manufacturer Part Number: TS-SU-014

Fits select 2004-2005 Chevrolet Silverado and GMC Sierra 2500 HD/3500 trucks (6.6L Duramax).

The Mishimoto silicone boot kit is engineered specifically for the 2004.5-2005 LLY Duramax to eliminate common failure points in the factory charge air system. Constructed with five layers of heat-resistant fibers, these boots provide significantly higher durability and blowout prevention compared to stock rubber. This kit utilizes Mishimoto's proprietary DuraCore technology, providing an inner layer that offers superior resistance to heat, pressure, fuel, and oil, ensuring a leak-free seal even in high-boost applications.

• Direct fit for 2004-2005 6.6L Duramax diesel engines
• Five-layer silicone construction with heat-resistant fibers
• DuraCore technology resists fuel, oil, and extreme temperatures
• Includes high-quality constant-tension T-bolt clamps for consistent clamping force
• Manufacturer Part Number: MMBK-DMAX-04BK

The Turbosmart Silicone 90 Degree Reducer Elbow provides a secure, high-pressure connection for intake and cooling systems where a change in diameter is required. Transitioning from 2.00 inches to 2.50 inches, this multi-layered elbow is engineered to handle the demands of forced induction applications and custom plumbing setups.

Constructed with a 5mm wall thickness, this hose is designed to maintain its shape and integrity under high boost levels and extreme thermal cycling. The multi-layered reinforced silicone resists collapsing under vacuum and expanding under pressure, ensuring consistent performance in high-heat engine environments.

• Inlet Diameter: 2.00 in
• Outlet Diameter: 2.50 in
• Angle: 90 Degrees
• Wall Thickness: 5.0 mm
• Pressure Rating: Up to 220 PSI
• Temperature Range: -50°C to 170°C (-60°F to 340°F)
• Color: Black
• Manufacturer Part Number: TS-HRE92025-BK

This Vibrant Performance 45-degree transition elbow is engineered for high-pressure intake and charge piping applications where space is limited. Constructed with high-temperature resistant aramid reinforcement fabric layered between premium silicone, this hose maintains structural integrity under boost while facilitating a precise size transition from 3.25 inches to 3.00 inches.

Designed for professional-grade plumbing, it handles an operating temperature range of -75°F to 392°F (-60°C to 200°C), making it ideal for turbocharger and intercooler connections. The multi-layer reinforcement ensures the hose resists ballooning and heat soak. Please note that silicone hoses are intended for air and coolant only; they are not compatible with oil or fuel transfer.

• Manufacturer Part Number: 19768
• Inlet/Outlet ID: 3.25in to 3.00in
• Angle: 45 Degree Transition
• Material: Aramid Reinforced Silicone
• Finish: Black
• Operating Temperature: -75°F to 392°F (-60°C to 200°C)

The Vibrant Performance 4-ply Aramid reinforced silicone straight hose coupler is engineered for high-heat and high-pressure automotive environments. Designed for use in turbocharger plumbing, intercooler end tanks, and charge pipe assemblies, this 12-inch hose section provides a durable connection that resists swelling and bursting under heavy load. The hand-wrapped construction ensures consistent wall thickness and reliability for critical plumbing paths.

Built with four layers of high-strength Aramid reinforcement fabric, these couplers maintain structural integrity across an expansive temperature range from -75°F to 392°F. This hose is UV and ozone resistant to prevent degradation over time. Please note this component is suitable for air, water, and coolant service only; it is not compatible with fuel or oil.

• Manufacturer Part Number: 27051
• Inside Diameter: 1.75 in.
• Length: 12 in.
• Construction: 4-ply Aramid reinforced silicone
• Temperature Rating: -75°F to 392°F (-60°C to 200°C)
• Compliance: Meets or exceeds SAE J20 specifications
• Finish: Black
• Application: Coolant, water, and air service

The Vibrant Performance Aramid Reinforced Silicone Transition Hose Coupler is engineered for high-demand plumbing applications that require a reliable transition between different pipe diameters. Each coupler features high-temperature resistant aramid reinforcement fabric layered between premium silicone, providing significantly more heat resistance and structural integrity than standard polyester-reinforced hoses.

• Durable Construction: Multi-layer aramid reinforcement allows for a consistent operating temperature range of -75°F to 392°F (-60°C to 200°C).
• Application Specific: Designed exclusively for air, water, and coolant service; not for use in fuel or oil transfer.
• Precise Fitment: Maintains a secure seal on forced induction piping, intake systems, and cooling junctions.

Technical Specifications:

• Inlet Diameter: 3.50 in (88.9 mm)
• Outlet Diameter: 3.00 in (76.2 mm)
• Total Length: 4.50 in (114.3 mm)
• Color: Black
• Material: Aramid Reinforced Silicone
• Manufacturer Part Number: 19736

Fits select 2002-2017 Subaru WRX, WRX STI, and Forester models.

The Torque Solution Throttle Body Hose Coupler is a performance-oriented replacement for the standard factory rubber coupler. In turbocharged EJ-series engines, the OEM hose is a common failure point that can crack or blow off under increased boost pressure, leading to power-robbing vacuum leaks. This reinforced silicone coupler is engineered to withstand extreme temperatures and high-pressure environments, ensuring a consistent, airtight seal between the intercooler and the throttle body.

• Multi-layer reinforced silicone construction for maximum durability
• Designed to resist oil and fuel degradation
• Direct fit replacement for the factory throttle body hose
• Ensures stable intake pressure under high-boost conditions
• Manufacturer Part Number: TS-SU-305

Vehicle Fitment:

• 2002-2007 Subaru Impreza WRX
• 2004-2014 Subaru Impreza WRX STI
• 2015-2017 Subaru WRX STI
• 2004-2008 Subaru Forester XT / Sports 2.5 XT

This Ticon Industries 3.5-inch straight silicone coupler is engineered for high-performance plumbing in intake, intercooler, and turbocharger systems. Featuring 4-ply reinforcement, this coupler is built to withstand significant boost pressures and high engine bay temperatures without collapsing or swelling over time.

Ideal for custom fabrication and motorsport applications, it provides a secure, vibration-damping connection between hard piping with a 3.5-inch outer diameter. The multi-layer construction offers superior durability and heat resistance compared to standard OEM rubber hoses, ensuring reliability under demanding conditions.

• Inner Diameter: 3.5 inches (89mm)
• Construction: 4-Ply Reinforced Silicone
• Type: Straight Coupler
• Color: Black finish
• Manufacturer Part Number: 131-08903-0401

This HKS high-performance silicone hose coupler is engineered for universal application in custom intake, intercooler, and cooling system plumbing. Designed to withstand the extreme temperatures and high boost pressures found in turbocharged engines, this multi-layer reinforced silicone hose provides a secure, vibration-resistant connection between hard pipes.

• Inner Diameter: 100mm
• Total Length: 70mm
• Color: Signature HKS Purple
• Material: High-temperature multi-layer reinforced silicone
• Manufacturer Part Number: 1803-SA040

Fits Volvo S60R and V70R models.

The do88 turbo inlet hose is a high-performance upgrade designed to replace the restrictive and aging factory intake pipe. Unlike the original rubber hose, which is prone to perishing or collapsing under high vacuum, this do88 version is constructed from multi-layer reinforced silicone. This ensures the hose maintains its structural integrity and internal diameter even during aggressive throttle applications.

By smoothing out the internal airflow path to the turbocharger, this inlet hose reduces turbulence and improves induction efficiency. It is a direct-fit solution that bolts to factory mounting points, making it an essential maintenance and performance upgrade for the P2 chassis R-models.

• Reinforced silicone construction prevents hose collapse under high boost/vacuum
• Smooth internal surface for optimized airflow to the turbocharger
• Superior heat resistance and durability compared to OE rubber
• Finish: Black
• Manufacturer Part Number: DO88-KIT96S

Fits select 2005-2012 BMW 323i, 325i, 328i, and 330i E9X models (N51/N52/N53 engines).

The do88 Intake Resonator Delete (DO88-KIT232-1B) replaces the restrictive factory intake bellows and resonator assembly with a smooth-bore silicone hose. By eliminating the factory resonator box, this kit reduces air turbulence and improves the path to the throttle body, resulting in sharper throttle response and a more aggressive induction note under load. This is a direct replacement for the factory rubber component, designed to withstand engine bay heat while providing a more durable and efficient solution for naturally aspirated E9X engines.

• Specifically designed for E90, E91, E92, and E93 3-Series models
• High-temperature multi-layer reinforced silicone construction
• Smooth internal surface reduces air turbulence compared to OE bellows
• Vibrant blue finish for an upgraded engine bay aesthetic
• Replaces factory part numbers associated with the resonator intake tract
• Manufacturer Part Number: DO88-KIT232-1B

Upgrade your BMW's intake system with the do88 reinforced silicone inlet hose, designed specifically for the 2001-2006 BMW 330i (E46) equipped with the 3.0L M54B30 engine. This component is a direct-fit replacement for the factory rubber intake boot, which is notorious for hardening and cracking over time, leading to unmetered air leaks, rough idling, and check engine lights.

• Fits 2001-2006 BMW 330i (E46) with 3.0L M54 engine.
• Constructed from high-grade multi-layer reinforced silicone for maximum durability against heat and engine bay cycles.
• Smooth internal profile eliminates the corrugated design of the OE hose to minimize air turbulence.
• Resistant to vacuum collapse under high load.
• Finish: Black silicone for an OEM-plus look.
• Manufacturer Part Number: DO88-KIT230-1S

Fits 2001-2006 BMW 325i (E46) equipped with the 2.5L M54B25 engine.

This do88 inlet hose is designed as a direct replacement for the failure-prone factory intake boot. Original rubber hoses are susceptible to drying out and cracking over time, which causes unmetered air leaks, poor idling, and decreased engine performance. This reinforced inlet hose is engineered to withstand the extreme heat and vacuum cycles of the BMW E46 engine bay, ensuring a lasting seal and consistent airflow.

• Direct fit for 2001-2006 BMW 325i (E46)
• Optimized for the 2.5L M54B25 engine
• Replaces cracking or leaking original intake boots
• Durable construction maintains structural integrity under vacuum
• Finish: Black
• Manufacturer Part Number: DO88-KIT229-1S