Designed for Subaru FA24 engines, this set of four forged CP Pistons provides the structural integrity needed to handle increased boost and cylinder pressures. These pistons are engineered to withstand the thermal and mechanical stresses of high-performance driving, offering a significant strength upgrade over factory cast components.

The 94.1mm bore size is precision-machined to ensure an optimal ring seal and consistent compression across all cylinders. These pistons are manufactured to tight tolerances, providing the weight-balanced performance required for stable operation in built FA24 platforms.

• Engine Compatibility: Subaru FA24
• Bore Size: 94.1mm
• Quantity: Set of 4
• Material: Forged aluminum alloy
• Application: Performance and high-boost engine builds

Engineered for high-performance Nissan SR20VE and SR20VET engine builds, this CP Pistons set provides the precision and durability required for increased power levels. Designed to replace factory components during a rebuild or performance upgrade, these pistons are machined to exact tolerances to ensure optimal ring seal and thermal management within the cylinder.

• Fits Nissan SR20VE and SR20VET engines
• Bore Size: 86.5mm
• Compression Ratio: 9.0:1
• High-strength construction for improved reliability under load
• Precision-engineered for specific SR20 valve relief and crown requirements

Engineered for the high-performance demands of the Mercedes-Benz AMG 4.0L V8, this CP Pistons forged set provides the structural integrity and thermal management required for modified M177 and M178 engines. These pistons are precision-machined to handle increased cylinder pressures and elevated boost levels that often exceed the limits of factory cast components.

• Forged from high-strength aluminum alloy for superior durability under heavy load
• Engineered with optimized skirt profiles to minimize friction and piston slap
• Advanced ring groove geometry for improved oil control and combustion sealing
• Designed specifically for the Mercedes-Benz M177 and M178 engine platforms

Technical Specifications:

• Manufacturer: CP Pistons
• Engine Compatibility: Mercedes M177 / M178
• Bore Diameter: 83mm
• Compression Ratio: 10.5:1
• Quantity: Set of 8 pistons with wrist pins and locks

Fits Nissan RB26DET engines.

This CP Pistons Piston and Ring set is engineered for high-performance engine builds that demand precision tolerances and structural integrity. With a 86.5mm bore size (+0.5mm over stock), this kit allows for clean overboring of the RB26DET block to restore cylinder roundness and finish while maintaining the 8.5:1 compression ratio ideal for forced induction applications.

• Engine Compatibility: Nissan RB26DET
• Bore Diameter: 86.5mm (+0.5mm Oversize)
• Compression Ratio: 8.5:1
• Precision-machined ring grooves and skirt profiles
• Complete set including pistons and high-strength piston rings

Fits Dodge 6.2L Hellcat engines.

Engineered to withstand the extreme cylinder pressures of supercharged applications, these CP Pistons forged inverted dome pistons are a premier choice for reinforcing or rebuilding your 6.2L Hellcat engine. These pistons are machined to exacting tolerances to ensure a superior ring seal and long-term durability under high thermal loads.

• Bore Diameter: 4.10 in
• Compression Ratio: 9.5:1
• Piston Style: Inverted Dome
• Engine Application: Dodge 6.2L Hellcat
• Quantity: Set of 8
• Manufacturer Part Number: BH62-950-010

Fits 1994-2001 Acura Integra GS-R equipped with the B18C1 engine.

This CP Piston & Ring Set is engineered to meet the tight tolerances and thermal demands of high-performance B-series builds. Featuring an 81.5mm bore and a 9.8:1 compression ratio, this kit (MPN SC7016-4) is designed for precision fitment and improved combustion efficiency in the B18C1 block. Whether you are refreshing a high-mileage GS-R or building for increased power, these pistons provide the structural integrity required to handle elevated cylinder pressures.

• Manufacturer Part Number: SC7016-4
• Engine Application: Acura B18C1
• Bore Diameter: 81.5mm
• Compression Ratio: 9.8:1
• Includes high-quality piston rings for a complete installation

Maintain the sealing integrity and performance of your engine with this genuine CP Pistons replacement ring set. Specifically engineered for use with the CP Piston Kit SC7112, this set (MPN: CPN-3268) ensures the precise ring-to-groove clearances and tension required for high-stress applications.

• Direct replacement ring set for CP Piston Kit SC7112
• Engineered to maintain strict OEM-plus tolerances for oil control and combustion sealing
• Includes a full set of rings for the designated application
• Manufacturer Part Number: CPN-3268

Fits 1988-1995 Toyota Celica All Trac and MR2 Turbo models equipped with the 3SGTE engine.

This CP Piston & Ring Set is specifically engineered for high-performance Toyota 3SGTE builds. Featuring an 86.5mm bore, this set provides a +0.5mm oversize designed for engine blocks requiring machining to restore cylinder wall integrity and ensure a precise seal. The 9.0:1 compression ratio is optimized for forced induction, allowing for increased boost levels while maintaining efficient combustion and reliability under load.

• Manufacturer Part Number: SC7450-4
• Engine Application: Toyota 3SGTE
• Bore Diameter: 86.5mm (+0.5mm Oversize)
• Compression Ratio: 9.0:1
• Includes: High-performance piston ring set
• Engineered for high-stress turbocharged applications

Fits 1999-2002 Mazda Miata models equipped with the BPZ3 engine.

Engineered for high-performance applications, this CP Pistons and Ring Set (SC7540-4) provides the structural integrity required for demanding engine builds. These forged pistons are designed to replace worn factory internals or upgrade your rotating assembly, offering precise tolerances and superior thermal management. The 83mm standard bore and 9.0:1 compression ratio make this set an excellent choice for maintaining reliability while optimizing combustion efficiency.

• Manufacturer Part Number: SC7540-4
• Bore Size: 83mm (Standard)
• Compression Ratio: 9.0:1
• Engine Code: Mazda BPZ3
• Includes: High-strength forged pistons and matched piston ring set

Built for durability and precision, CP Pistons are used by professional engine builders to ensure consistent power delivery and long-term performance under high-stress conditions.

Fits 1989-1998 Nissan 240SX (KA24).

This CP Pistons and rings set is specifically engineered for turbocharged Nissan KA24 applications. Designed to withstand the extreme cylinder pressures and thermal loads of forced induction, these pistons offer the durability required for high-performance builds. The 89.5mm bore represents a +0.5mm oversize, making this set an ideal choice for engine blocks requiring a precision overbore to restore cylinder wall integrity.

• Bore Diameter: 89.5mm (+0.5mm oversize)
• Compression Ratio: 9.0:1
• Engine Focus: KA24 (Turbocharged)
• Manufacturer Part Number: SC7300-4
• Included Components: Precision-machined pistons and high-performance ring set

Fits 2002-2006 Acura RSX Base and Type-S models equipped with K20A, K20A2, or K20A3 engines.

This CP Piston & Ring Set (SC70457-4) is engineered for high-performance Honda and Acura K-Series builds that demand superior strength and tighter tolerances. These forged pistons provide the reliability needed for increased cylinder pressures in forced induction or high-compression naturally aspirated applications. Sized at 87mm (+1.0mm over stock), they are ideal for engines requiring a fresh bore and hone to restore cylinder wall integrity or slightly increase displacement.

• Manufacturer Part Number: SC70457-4
• Bore Diameter: 87mm (+1.0mm Oversize)
• Engine Compatibility: Acura/Honda K20A, K20A2, K20A3
• Construction: High-strength forged aluminum alloy
• Includes: Performance piston rings and wrist pins

Maintain peak engine performance with the CP Pistons CPN-3524 replacement ring set. This high-performance ring set is engineered specifically as a direct replacement for CP piston part numbers SC7300, SC73264V, and CS7343V. Whether you are performing an engine refresh or a complete rebuild, utilizing these application-specific rings ensures the precise cylinder sealing and oil control required for high-load environments.

These rings are manufactured to strict tolerances to match the original specifications of your CP shelf-stock pistons, facilitating efficient heat transfer and reducing blow-by. Each component is designed to withstand the rigors of performance driving while protecting the cylinder walls.

• Manufacturer Part Number: CPN-3524
• Engineered for CP Pistons: SC7300, SC73264V, and CS7343V
• Precision-ground for optimal compression and oil management
• Direct replacement for the rings originally supplied with the piston kit

Fits 1994-2001 Acura Integra GS-R (B18C1).

This CP Pistons Piston & Ring Set (SC7015-4) is engineered for the B18C1 engine found in the 1994-2001 Acura Integra GS-R. These high-performance forged pistons are designed to withstand the rigors of high-RPM use, providing a reliable foundation for street and track builds. Each set features a 81.0mm bore and maintains a 9.8:1 compression ratio for consistent power delivery.

• Manufacturer Part Number: SC7015-4
• Bore Diameter: 81.0mm
• Compression Ratio: 9.8:1
• Engine Compatibility: Acura B18C1
• Includes: High-strength forged pistons, premium piston rings, and wrist pins

Vehicle Fitment:

This CP-Carrillo forged piston and ring set is engineered to handle the high-performance demands of the BMW and Toyota B58 3.0L inline-six engine. Designed for superior strength under increased cylinder pressures and thermal loads, these pistons are an essential upgrade for tuned or forced-induction builds where factory cast components may fail.

Each piston is precision-machined to ensure tight tolerances and optimal ring seating, providing improved oil control and long-term durability. This set maintains a high-performance 11:1 compression ratio while utilizing a standard 82mm bore, making it a direct-fit performance solution for your B58 rotating assembly.

• Fits BMW and Toyota vehicles equipped with the B58 3.0L engine
• Bore Size: 82mm
• Compression Ratio: 11:1
• Construction: High-strength forged aluminum
• Quantity: Complete set of 6 pistons and matching ring sets
• Manufacturer Part Number: SC8705-6

Fits select 2014-2024 Audi and Volkswagen models equipped with the 2.0L TSI engine.

This CP Pistons Piston & Ring Set is engineered for high-performance 2.0L TSI builds that require tighter tolerances and superior strength than factory components. Designed to handle increased cylinder pressures, these pistons provide a reliable foundation for tuned street or track vehicles.

• Bore Size: 83mm
• Compression Ratio: 9.5:1
• Engine Compatibility: 2.0L TSI
• Manufacturer Part Number: SC7637-4

Each kit comes as a complete set including precision-machined pistons, high-performance piston rings, wrist pins, and locks. This ensures a comprehensive solution for engine builders looking to maintain optimal ring seal and thermal stability under load.

Designed for high-performance applications, this CP Piston forged piston set (SC7708-6) is engineered specifically for the BMW S58B30 engine. These pistons maintain the factory 84mm standard bore and feature a 9.3:1 compression ratio, providing the necessary strength and thermal stability for high-output builds and increased boost levels.

Each piston is precision-machined from high-strength forged aluminum to withstand the extreme cylinder pressures of the S58 powerplant. This comprehensive set includes six pistons designed to optimize combustion efficiency and reduce friction, ensuring durability under demanding track or street conditions.

• Engine Application: BMW S58B30
• Bore Diameter: 84mm (Standard Bore)
• Compression Ratio: 9.3:1
• Quantity: Set of 6 Pistons
• Material: High-strength forged aluminum
• Manufacturer Part Number: SC7708-6

Fits Honda H22 engines.

Engineered for high-performance builds, this CP Pistons Piston and Ring Set (SC7130-4) provides the strength and precision required for the Honda H22 powerplant. These forged pistons are designed to maintain tighter tolerances and handle increased thermal loads better than factory cast components, making them a critical upgrade for performance-oriented engine rebuilds.

This set features a standard 87.0mm bore and a 10.0:1 compression ratio, striking a balance between efficient power delivery and engine longevity. Each kit comes complete with a matched set of high-quality piston rings to ensure a superior combustion seal and consistent oil control under load.

• Manufacturer Part Number: SC7130-4
• Bore: 87.0mm (Standard)
• Compression Ratio: 10.0:1
• Engine Fitment: Honda H22
• Includes: Pistons and piston ring set

Fits 2002-2006 Acura RSX Base and Type-S models equipped with K24/K20 hybrid engine configurations (K24 block with K20A, K20A2, or K20A3 cylinder heads).

Engineered for high-performance K-Series builds, this CP Piston and Ring Set provides the structural integrity required for increased cylinder pressures. These pistons are specifically designed for "Frankenstein" K24/K20 engine setups, ensuring proper valve relief clearance and optimized geometry for the hybrid head and block combination. Each piston is precision-forged to tight tolerances, reducing thermal expansion and improving ring seal for consistent power delivery and long-term reliability under heavy load.

• Manufacturer Part Number: SC7045-4
• Bore: 87.00mm
• Size: Standard (STD)
• Compatibility: K24 block with K20A, K20A2, or K20A3 heads
• Includes high-performance piston rings, wrist pins, and locks
• Forged construction for superior strength-to-weight ratio

This individual cylinder replacement ring set is engineered specifically for use with CP Pistons part numbers SC7408 and SC8472. Designed to maintain the precise tolerances and sealing performance required in high-performance applications, the CPT-3406PVD ring set ensures optimal compression sealing and oil control.

Each kit contains the necessary rings to service a single cylinder. When refreshing an engine or performing maintenance, using genuine CP Pistons replacement rings ensures exact compatibility with the piston's specific ring land dimensions and material requirements.

• Manufacturer Part Number: CPT-3406PVD
• Compatible Piston Kits: SC7408 and SC8472
• Quantity: Rings for One (1) Cylinder
• Engineered for high-durability and reduced friction

This CP-Carrillo Bullet Race Series piston set is engineered specifically for the Dodge 6.2L Hellcat engine, providing a high-strength forged solution for high-horsepower builds. Designed to handle the extreme thermal and mechanical loads of forced induction, these pistons offer the durability required for performance HEMI applications.

Fits Dodge 6.2L Hellcat engines (Dodge SB V8).

• Brand: CP-Carrillo
• Series: Bullet Race Series
• Bore: 4.090 in
• Stroke: 3.580 in
• Rod Length: 6.200 in
• Quantity: Set of 8
• Manufacturer Part Number: BH62-950-STD

Each piston in the Bullet Series is machined to precise tolerances, ensuring consistent balance and performance across the entire engine. This kit is a critical upgrade for engine builders looking to enhance the structural integrity of their Dodge SB rotating assembly under high-boost or racing conditions.

This CP Pistons forged piston and ring set is engineered specifically for Toyota 1JZGTE and 2JZGTE engines. Designed to withstand the rigors of high-performance builds, these pistons feature an 86.5mm bore, providing a 0.5mm overbore from the factory 86mm specification. The 10.0:1 compression ratio is optimized for builders looking to maximize efficiency and throttle response in high-output JZ engine configurations.

• Fits Toyota 1JZGTE and 2JZGTE engines
• Bore: 86.5mm (+0.5mm overbore)
• Compression Ratio: 10.0:1
• Precision forged for superior strength and heat management
• Complete set of 6 pistons with matching high-performance rings
• Manufacturer Part Number: SC8472-6

Fits BMW and Toyota B58/B48 engines.

This CP Piston & Ring Set is engineered for high-performance builds requiring precision tolerances and enhanced durability. Designed to withstand the increased cylinder pressures of performance-tuned engines, these pistons provide superior thermal management and a reliable combustion seal. This comprehensive kit includes six pistons and matching rings to ensure consistent performance across all cylinders.

• Bore Size: 3.2283in
• Compression Ratio: 11.0:1
• Quantity: Set of 6 Pistons and Ring Packs
• Engine Application: BMW/Toyota B58/B48
• Manufacturer Part Number: SC7705-6

Each component is precision-machined to exact specifications, making this set a critical upgrade for enthusiasts and builders looking to reinforce the rotating assembly of their B58 or B48 power plant.

Designed for the BMW N55B30 and S55B30 3.0L inline-six engines, this set of six forged CP Pistons provides the structural integrity and thermal management required for high-boost turbocharged applications. These pistons are engineered to replace factory components, offering superior resistance to ring land failure and cylinder pressure compared to cast alternatives.

• Fits BMW N55B30 and S55B30 6-cylinder engines.
• Engineered for standard (STD) 84mm bore diameters.
• Forged construction for increased strength and durability in performance builds.
• Precision-machined valve pockets and ring grooves for optimal sealing and clearance.
• Specifications: 84mm Bore, -9.7cc Dish Volume.
• Manufacturer Part Number: SC7700-6
• Includes: Set of 6 Pistons.

Optimized for the Audi 2.0L TSI (EA888) engine, this CP Piston & Ring Set is engineered to provide the structural integrity required for high-performance and forced induction applications. These forged pistons offer superior strength-to-weight ratios compared to factory cast units, ensuring reliability under increased cylinder pressures.

• Manufacturer Part Number: SC7634-4
• Engine Fitment: Audi 2.0L TSI (EA888) (2.0L)
• Bore Size: 83mm (+.5mm oversize)
• Compression Ratio: 9.5:1
• Components Included: Full set of forged pistons and high-performance rings

Each piston is machined to exacting tolerances to ensure consistent deck height and skirt clearance. This set includes a matched ring pack designed for optimal sealing and oil control, making it an essential upgrade for engine builds targeting increased boost or power levels. Replaces standard components with professional-grade hardware for enhanced durability.

This CP Pistons Piston & Ring Set is engineered for the high-performance demands of Toyota 1JZ-GTE and 2JZ-GTE engines. Forged for superior strength-to-weight ratios, these pistons are designed to withstand the elevated cylinder pressures and thermal loads common in forced induction applications. The 87mm bore size represents a +1.0mm overbore, providing a solution for block machining during engine refreshes while slightly increasing displacement.

The set includes high-performance piston rings specifically matched to the piston grooves to ensure an optimal combustion seal and efficient oil control. Whether building a street-performance 1JZ or a high-boost 2JZ, this set provides the precision tolerances required for reliable power delivery.

• Engine Compatibility: Toyota 1JZ-GTE and 2JZ-GTE
• Bore Diameter: 87mm (+1.0mm Oversize)
• Compression Ratio: 9.0 (2JZ) / 10.0 (1JZ)
• Quantity: Set of 6 pistons and matching rings
• Manufacturer Part Number: SC7473-6

Designed for high-performance builds, this CP Pistons Piston & Ring Set (SC7472-6) is engineered for the Toyota 1JZ-GTE and 2JZ-GTE engines. These forged pistons are built to withstand the extreme cylinder pressures and thermal loads common in forced induction applications, providing a significant upgrade over factory cast components.

This set features an 86.5mm bore, which is a +0.5mm oversize. This makes it an ideal solution for engine refreshes where the block requires boring and honing to restore perfect cylinder geometry. The kit comes complete with a matched set of high-strength piston rings designed for optimal sealing and oil control.

• Fits Toyota 1JZ-GTE and 2JZ-GTE engines
• Bore Diameter: 86.5mm (+0.5mm Oversize)
• Compression Ratio: 9.0:1 / 10.0:1
• Includes high-performance piston ring set
• Manufacturer Part Number: SC7472-6
• Quantity: Set of 6 pistons and rings

This CP Pistons and Ring Set is engineered specifically for high-performance Toyota 1JZGTE engine builds. Designed to handle the extreme cylinder pressures associated with forced induction, these pistons provide the strength and thermal stability required for professional-grade engine assembly.

This comprehensive set includes six pistons and a matched set of high-quality piston rings to ensure an optimal seal and long-term durability. Featuring a 86.0mm standard bore, this set allows for precise fitment in OE-spec blocks while significantly upgrading the rotating assembly's power-holding capacity.

• Engine Compatibility: Toyota 1JZGTE
• Bore Diameter: 86.0mm
• Size: STD (Standard)
• Compression Ratio: 9.0:1
• Quantity: Complete set of 6 pistons and rings
• Manufacturer Part Number: SC7471-6

This CP Piston and Ring Set is engineered for high-performance Toyota 2JZGTE engine builds. These forged pistons are designed to withstand the high cylinder pressures associated with forced induction, providing a significant strength upgrade over factory components.

This set features a standard 86.5mm bore and a 9.5:1 compression ratio, offering a precise balance for tuners seeking improved thermal efficiency and response. Each piston is machined to exacting tolerances to ensure optimal ring groove squareness and superior oil control.

• Engine Compatibility: Toyota 2JZGTE
• Bore Size: 86.5mm (STD)
• Compression Ratio: 9.5:1
• Quantity: Set of 6 pistons and matching rings
• Manufacturer Part Number: SC7467-6
• Includes: Forged pistons, high-performance piston rings, wrist pins, and locks

Fits 1993-1998 Toyota Supra Twin Turbo (2JZ-GTE).

This high-performance CP Piston & Ring Set is engineered to withstand the extreme cylinder pressures and thermal loads of the 2JZ-GTE engine. Designed for precision fitment and improved durability over factory components, this set provides a reliable foundation for built engines running increased boost levels. These forged pistons feature a 9.0:1 compression ratio and are sized for an 86.5mm bore (+0.5mm oversize).

• Manufacturer Part Number: SC7464-6
• Bore Size: 86.5mm (+0.5mm Oversize)
• Compression Ratio: 9.0:1
• Engine: Toyota 2JZ-GTE
• Quantity: Set of 6 Pistons and Rings

This CP Piston & Ring Set is engineered specifically for the 1993-1998 Toyota Supra Twin Turbo equipped with the 2JZGTE engine. Designed for high-performance builds, these pistons feature a 9.0:1 compression ratio and a standard 86mm bore size, providing a robust foundation for forced induction applications.

• Fits 1993-1998 Toyota Supra Twin Turbo (2JZGTE)
• Bore Size: 86.00mm (Standard)
• Compression Ratio: 9.0:1
• Quantity: Set of 6 pistons with matching rings
• Manufacturer Part Number: SC7463-6

Each set includes precision-engineered forged pistons and a high-quality ring set designed to ensure optimal cylinder sealing and superior heat management under extreme combustion pressures.