Banks Dual Heat Capable Monster-Ram® improves throttle response and fuel economy by eliminating airflow restrictions. The system prevents severe engine damage by replacing the failure-prone factory grid heater with the Banks high-flow intake plate. The factory heater can't fail if it's not there. Monster-Ram® is the only 50-state emissions-compliant RAM intake elbow. Why It's Better. A True Monster Of A RAM. The all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock over 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Banks High-flow coil heater-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

The Banks Monster-Ram Turbo Inlet for the 2017-2026 Duramax L5P is the only intake elbow that outperforms stock without the destructive effects of turbo surge, caused by competitors. More than a year in development, the Monster-Ram increases air density to the compressor. This results in slower turbo shaft speed and a reduction in time to boost. With slower shaft speeds, throttle response is improved, and turbo life is increased.Key Features: Improved throttle response. Reduced turbo shaft speed. Increased turbo life (thanks to reduced shaft speed). 11% lower turbo drive pressure. 23% greater Gulp Capacity (volume). 17% larger turbo inlet size. 18.7% less restrictive than stock. 11.9% increase in mass air flow over stock. Retains PCV geometry. Cast aluminum. Banks red powder coat. Or Natural aluminum for custom coating. 50-State Emission Compliant CARB-EO D-161-158

• 11% Lower Turbo Drive Pressure, Improves Throttle Response and Turbo Life, No Turbo Surge

This Part Fits:

Feeds your Cummins engine cooler, denser, outside air for greater power and fuel economy. Up to 66% greater flow over stock. Extensively tested and validated. Banks Ram-Air Intake feeds your Cummins engine cooler, denser, outside air for greater power and fuel economy. Up to 66% greater flow over stock. Its performance is extensively tested and validated: in the computer, using Computational Fluid Dynamics software - on the flowbench - and later, on the vehicle. Let the others build and ship: Ram-Air's performance is proven, again and again! Key Features: Extensively tested & validated. Enclosed housing keeps out hot, power-robbing engine air. Inhales cooler outside air for more power & MPG. Giant filter maximizes high-flow filtration. Helps engine run cooler. Accommodates engine movement. Prevents component damage. Extends service life and requires fewer cleanings. Dry Air Filter element. 5-year Limited Warranty.

• 66% greater Mass Air Flow over stock, Better power delivery, efficiency, MPG
• 5-Year Limited Warranty

This Part Fits:

Flowbench developed, dyno proven. Improves airflow up to 33% . Huge cold-air inlet and extra large outlet. Intake tube shaped by CFD software. Cooler temps, less smoke and more MPG. Banks Ram-Air Superiority. Increase Power and MPG. Banks Ram-Air Intake System replaces the factory's flat panel filter with a large conical filter that provides maximum high-flow filtration. The Ram-Air's opening dwarfs the stock's inlet. The huge inlet, enclosed housing and much larger tubing reduce restrictions, dramatically improving airflow to the cylinders. Intake tube shaped by CFD software. Please note: This Ram-Air intake system Cannot be installed on a vehicle that has the Banks Brake. New Filter Options! Choose from the traditional red, Oiled filter or the all-new black, Dry filter. Key Features: Extensively tested & validated. Enclosed housing keeps out hot, power-robbing engine air. Inhales cooler outside air for more power & MPG. Giant filter maximizes high-flow filtration. Helps engine run cooler. Accommodates engine movement. Prevents component damage. Extends service life and requires fewer cleanings. 5-year Limited Warranty. Increases airflow up to 33%. Outflows stock and competitors. Huge cold-air inlet. Extra large outlet. Cooler temps, less smoke and more MPG. Will not work with Banks Brake

• Outflows stock by 33% and Lowers EGTs, Eliminates factory airbox restrictions
• 5-Year Limited Warranty

This Part Fits:

Outflows stock up to 50 Percent. Reduces exhaust gas temps (EGTs). Exclusive 4-1/2 inch bellows to accommodate engine movement. Enclosed housing keeps out hot, power-robbing engine air. Easy filter access for monitoring & cleaning. Testing, testing & more testing. Banks Ram-Air Intake Systems are tested and proven. They start out as CAD software prototypes and are put through flow simulations. After a hardware prototype is made, it's tested on a flowbench. Then it's tested on the vehicle. And finally, Banks' density-tests the Ram-Air against stock and many competitors. Proven design. Proven performance. Banks Ram-Air Intake maximizes the flow of cool, dense air to the engine for greater power and fuel economy. Thanks to its enclosed cold-air housing, huge inlet with giant dome-shaped filter, and streamlined internal design, it flows 50% better than stock! Infact, it performs so well that it delivers greater air density to the turbo's inlet than all competitors tested. Add on the optional Super-Scoop (42190 for standard bumper or 42191 for painted bumper), and the results are even better! Longer service life, too. An aftermarket exclusive: with 4-1/2" bellows, Banks Ram-Air accommodates engine movement, which protects the components and extends service life. What's more, Ram-Air is designed to not cause fault or error codes. It's all about density. And Banks Ram-Air Intake delivers. The harder you work your truck, the more Banks Ram-Air Intake improves power and fuel economy! Key Features: Enclosed housing keeps out hot, power-robbing engine air. Reduces exhaust gas temps and sooty, black smoke. Inhales cooler outside air for more power & MPG. Extends service life and requires fewer cleanings. Giant filter maximizes high-flow filtration. Extensively tested & validated. Outflows stock up to 50%. 5-year Limited Warranty. OILED Air Filter Element. Exclusive 5 inch bellows

• Gain up to +28hp/+52lb-ft, 50% Less Restrictive +6.4% intake density & lower EGT
• 5-Year Limited Warranty

This Part Fits:

Cold-air intake with large lifetime filter, enclosed housing and large tubing offers huge improvements over stock flow, increasing power and fuel economy. Banks Ram-Air Superiority. Banks opens up your truck's breathing with a flowbench-developed and dyno-proven Ram-Air Intake System that is less restrictive than stock. Ram-Air's filter has a huge outlet with deep filter pleats that maximize flow and a complete air filter housing that draws in cooler, denser air to the engine for greater power and fuel economy. Filter on a stick: a joke that's not funny. A filter on a stick is a bad joke. It's wide-open to hot, power-robbing underhood engine air. Ram-Air houses a giant filter in an enclosed cold-air box, which inhales cool, dense outside air. All for more power, mileage, and it's designed to not cause fault or error codes. The Banks Ram-Air utilizes the stock base for an easy, hassle-free fit that ensures a secure connection with no disruption to air flow. Key Features: Enclosed housing keeps out hot, power-robbing engine air. Inhales cooler outside air for more power and MPG. Extends service life and requires fewer cleanings. Giant filter maximizes high-flow filtration. Beats stock and the competition. 5-year Limited Warranty. Helps engine run cooler. Oiled Air Filter Element

• Outflows stock by 51.3%, Inhales cold air for more power and MPG
• 5-Year Limited Warranty

This Part Fits:

Cold-air intake with large lifetime filter, enclosed housing and large tubing doubles stock flow, increasing power and fuel economy. Banks Ram-Air Superiority. 4.0L 6-CYL: 1997-06 Wrangler TJ. Banks Ram-Air Intake System replaces the factory's flat panel filter with a large conical filter that provides maximum high-flow filtration. The Ram-Air's opening is over twice as big as stock's, and without the 90-Degree detours that choke airflow and kill power. The huge inlet, enclosed housing and much larger tubing reduce restrictions, dramatically improving airflow to the cylinders. The results are impressive: Banks Ram-Air Intake more than doubles the factory intake's airflow, improving the Jeep's power and fuel economy. And Banks Ram-Air is designed to accommodate engine movement, which prevents component damage for reliable service life. Key Features: Enclosed housing keeps out hot, power-robbing engine air. Outflows the stock intake by a staggering 116%. Inhales cooler outside air for more power & MPG. Extends service life & requires fewer cleanings. Giant filter maximizes high-flow filtration. Accommodates engine movement. Prevents component damage. 5-year Limited Warranty. OILED Air Filter Element. Helps engine run cooler

• 2x gain outflows stock by 116%, Inhales cold air for more power and MPG, US Patent #10,138,851 B2
• 5-Year Limited Warranty

This Part Fits:

Banks Dual Heat Capable Monster-Ram® improves throttle response and fuel economy by eliminating airflow restrictions. The system prevents severe engine damage by replacing the failure-prone factory grid heater with the Banks high-flow intake plate. The factory heater can't fail if it's not there. Monster-Ram® is the only 50-state emissions-compliant RAM intake elbow. Why It's Better. A True Monster Of A RAM. The all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock over 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Banks High-flow coil heater-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

Banks Dual Heat Capable Monster-Ram® improves throttle response and fuel economy by eliminating airflow restrictions. The system prevents severe engine damage by replacing the failure-prone factory grid heater with the Banks high-flow intake plate. The factory heater can't fail if it's not there. Monster-Ram® is the only 50-state emissions-compliant RAM intake elbow. Why It's Better. A True Monster Of A RAMThe all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock over 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Banks High-flow coil heater-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

Outflows stock and competitors up to 35 Percent Reduces exhaust gas temps (EGTs) Exclusive 5 inch bellows prevents component damage Cooler temps Cleaner-running engine Dry Air Filter Element Testing, testing & more testing. Banks Ram-Air Intake Systems are tested and proven. They start out as CAD software prototypes and are put through flow simulations. After a hardware prototype is made, it's tested on a flowbench. Then it's tested on the vehicle. And finally, Banks' density-tests the Ram-Air against stock and many competitors. Proven design. Proven performance. Thanks to its enclosed cold-air housing, huge inlet, giant dome-shaped filter and streamlined design, Banks Ram-Air Intake maximizes the flow of cool, dense air to the engine for greater power and fuel economy. It flows 35% better than stock. And delivers greater air density to the turbo's inlet than the stock system and every competitor tested! It's all about density. And Banks Ram-Air Intakes deliver. The harder you work your truck, the more Banks Ram-Air Intake improves power and fuel economy! Longer service life, too. An aftermarket exclusive: with 5" bellows, Banks Ram-Air accommodates engine movement, which protects the components and extends service life. What's more, Ram-Air is designed to not cause fault or error codes. Key Features: Extensively tested & validated. Enclosed housing keeps out hot, power-robbing engine air. Inhales cooler outside air for more power & MPG. Giant filter maximizes high-flow filtration. Helps engine run cooler. Accommodates engine movement. Prevents component damage. Extends service life and requires fewer cleanings. 5-year Limited Warranty. Outflows stock and competitors up to 35%. Reduces exhaust gas temps (EGTs). Exclusive 5 inch bellows prevents component damage. Cooler temps. Cleaner-running engine. Dry Air Filter Element

• Outflows stock 35%, Increase Power/MPG, reduce EGT
• 5 Year Warranty

This Part Fits:

Outflows stock and competitors up to 35 Percent Reduces exhaust gas temps (EGTs) Exclusive 5 inch bellows prevents component damage Cooler temps Cleaner-running engine Oiled Air Filter Element Testing, testing & more testing. Banks Ram-Air Intake Systems are tested and proven. They start out as CAD software prototypes and are put through flow simulations. After a hardware prototype is made, it's tested on a flowbench. Then it's tested on the vehicle. And finally, Banks' density-tests the Ram-Air against stock and many competitors. Proven design. Proven performance. Thanks to its enclosed cold-air housing, huge inlet, giant dome-shaped filter and streamlined design, Banks Ram-Air Intake maximizes the flow of cool, dense air to the engine for greater power and fuel economy. It flows 35% better than stock. And delivers greater air density to the turbo's inlet than the stock system and every competitor tested! It's all about density. And Banks Ram-Air Intakes deliver. The harder you work your truck, the more Banks Ram-Air Intake improves power and fuel economy! Longer service life, too. An aftermarket exclusive: with 5" bellows, Banks Ram-Air accommodates engine movement, which protects the components and extends service life. What's more, Ram-Air is designed to not cause fault or error codes. Key Features: Extensively tested & validated. Enclosed housing keeps out hot, power-robbing engine air. Inhales cooler outside air for more power & MPG. Giant filter maximizes high-flow filtration. Helps engine run cooler. Accommodates engine movement. Prevents component damage. Extends service life and requires fewer cleanings. 5-year Limited Warranty. Outflows stock and competitors up to 35%. Reduces exhaust gas temps (EGTs). Exclusive 5 inch bellows prevents component damage. Cooler temps. Cleaner-running engine. OILED Air Filter Element

• Gain up to +39hp/+69lb-ft, 35% Less Restrictive Lowers EGT and soot output
• 5 Year Warranty

This Part Fits:

Up to 39hp and 69lb-ft gain and outflows stock and competitors up to 35 Percent while reducing exhaust gas temps (EGTs). Exclusive 5 inch bellows prevents component damage Cooler temps Cleaner-running engine Oiled Air Filter Element Testing, testing & more testing. Banks Ram-Air Intake Systems are tested and proven. They start out as CAD software prototypes and are put through flow simulations. After a hardware prototype is made, it's tested on a flowbench. Then it's tested on the vehicle. And finally, Banks' density-tests the Ram-Air against stock and many competitors. Proven design. Proven performance. Banks Ram-Air Intake maximizes the flow of cool, dense air to the engine for greater power and fuel economy. Thanks to its enclosed cold-air housing, huge inlet with giant dome-shaped filter, and streamlined internal design, it flows 35% better than stock! Infact, it performs so well that it delivers greater air density to the turbo's inlet than all competitors tested. Longer service life, too. An aftermarket exclusive: with 5" bellows, Banks Ram-Air accommodates engine movement, which protects the components and extends service life. What's more, Ram-Air is designed to not cause fault or error codes. It's all about density. And Banks Ram-Air Intake delivers. The harder you work your truck, the more Banks Ram-Air Intake improves power and fuel economy! Key Features: Enclosed housing keeps out hot, power-robbing engine air. Reduces exhaust gas temps and sooty, black smoke. Inhales cooler outside air for more power and MPG. Extends service life and requires fewer cleanings. Giant filter maximizes high-flow filtration. Extensively tested and validated. Outflows stock up to 35%. 5-year Limited Warranty. OILED or DRY Air Filter Element. Exclusive 5 inch bellows

• Gain up to +39hp/+69lb-ft, 35% Less Restrictive Lowers EGT and soot output
• 5-Year Limited Warranty

This Part Fits:

Banks Ram-Air Superiority. Flowbench developed, dyno proven. Improves airflow up to 62%, Enclosed cold-air box with exclusive 4-1/2" bellows to accommodate engine movement. Cooler temps, less smoke and more MPG. Banks' revolutionary Ram-Air Intake System offers the reliability and durability of a factory intake yet delivers astonishing airflow. It flows up to 62% better than stock and outflows Volant and AIRAID, thanks in part to the Ram-Air's huge filter area (fewer filter cleanings!), giant outlet, and the complete air filter housing with large side & bottom inlets. Banks Ram-Air collects & directs more power-producing cool, dense air to the engine, lowering EGTs and smoke and improving fuel economy, too! The cotton gauze filter traps the most dirt and debris. And Ram-Air is the only aftermarket intake with 4-1/2" bellows to accommodate engine movement. This prevents component damage and promotes reliable service life. Key Features: Enclosed housing keeps out hot, power-robbing engine air. Reduces exhaust gas temps and sooty, black smoke. Inhales cooler outside air for more power & MPG. Extends service life and requires fewer cleanings. Outflows stock and competitors up to 62%. Giant filter maximizes high-flow filtration. Extensively tested & validated. 5-year Limited Warranty. OILED Air Filter Element. Exclusive 5 inch bellows

• Gain up to +28hp/+52lb-ft, 62% Less Restrictive Lowers EGT and soot output
• 5-Year Limited Warranty

This Part Fits:

Increased power and fuel economy, while reducing exhaust gas temps and sooty, black smoke. Exclusive 5 inch bellows accommodates engine movement and prevents component damage. The Banks Ram-Air Intake System delivers exceptional airflow and air density. Its large cotton gauze air filter requires fewer cleanings than competitive filters (stock's small paper filter is not reusable). With its giant 7-1/8" outlet, streamlined components and enclosed cold-air box that keeps hot engine air out of the intake, the Ram-Air flows up to 57% better than stock. Improves power and fuel economy, lowers exhaust gas temps and reduces black smoke. (An indicator of unburned fuel, black smoke is power you can see but not use!) And Banks' unique 5" bellows accommodates engine movement, which prevents component damage and prolongs service life. Designed to not cause fault or error codes. Key Features: Enclosed housing keeps out hot, power-robbing engine air. Reduces exhaust gas temps and sooty, black smoke. Inhales cooler outside air for more power & MPG. Extends service life and requires fewer cleanings. Outflows stock and competitors up to 48%. Giant filter maximizes high-flow filtration. Extensively tested & validated. 5-year Limited Warranty. DRY Air Filter Element. Exclusive 5 inch bellows

• Gain up to +39hp/+69lb-ft, 48% Less Restrictive Lowers EGT and soot output
• 5-Year Limited Warranty

This Part Fits:

Increased power and fuel economy, while reducing exhaust gas temps and sooty, black smoke. Exclusive 5 inch bellows accommodates engine movement and prevents component damage. The Banks Ram-Air Intake System delivers exceptional airflow and air density. Its large cotton gauze air filter requires fewer cleanings than competitive filters (stock's small paper filter is not reusable). With its giant 7-1/8" outlet, streamlined components and enclosed cold-air box that keeps hot engine air out of the intake, the Ram-Air flows up to 48% better than stock. Improves power and fuel economy, lowers exhaust gas temps and reduces black smoke. (An indicator of unburned fuel, black smoke is power you can see but not use!) And Banks' unique 5" bellows accommodate engine movement, which prevents component damage and prolongs service life. Key Features: Enclosed housing keeps out hot, power-robbing engine air. Reduces exhaust gas temps and sooty, black smoke. Inhales cooler outside air for more power & MPG. Extends service life and requires fewer cleanings. Outflows stock and competitors up to 48%. Giant filter maximizes high-flow filtration. Extensively tested & validated 5-year Limited Warranty. DRY Air Filter Element. Exclusive 5 inch bellows

• Gain up to +39hp/+69lb-ft, 48% Less Restrictive Lowers EGT and soot output
• 5-Year Limited Warranty

This Part Fits:

Flowbench developed, dyno-proven cold-air intake with enclosed housing improves flow up to 57 percent. Increases power and fuel economy. Reduces exhaust gas temps and sooty, black smoke. Passes the test. Again and again. Others build and ship without testing. Not Banks. Our Ram-Air Intakes start out as CAD software prototypes and are put through flow simulations. The design is refined until the simulation shows optimal performance. Then a hardware prototype is made and the design is validated on a flowbench. After that comes dyno testing and on-vehicle testing. It takes a superior design to pass all those tests! Filter on a stick: a joke that's not funny. A filter on a stick is a bad joke. It's wide-open to hot underhood engine air, and there's no power in hot air! Ram-Air houses a giant filter in an enclosed cold-air box, which inhales cool, dense outside air - more than Banks competitors and up to 57% more than stock - for more power and mileage, lower EGTs and less smoke. And it's designed to not cause fault or error codes. Bellows, too? Very exclusive. Banks Ram-Air is the only aftermarket intake with bellows. This accommodates engine movement and prevents component damage for longer service life. The optional high-flow Super-Scoop is another Banks exclusive! Key Features: Enclosed housing keeps out hot, power-robbing engine air. Inhales cooler outside air for more power & MPG. Optional Super-Scoop rams cold air for more power. Extends service life and requires fewer cleanings. Reduces exhaust gas temps (EGTs) and smoke. Outflows stock and competitors up to 57%. Giant filter maximizes high-flow filtration. Accommodates engine movement. Extensively tested & validated. Prevents component damage. 5-year Limited Warranty. Oiled Air Filter Element. Helps engine run cooler

• Outflows stock by 57%, Inhales cold air lowering EGT and soot
• 5-Year Limited Warranty

This Part Fits:

Banks Power, an innovator in gas and diesel performance for over 60 years, introduces the latest in its Ram-Air family of emissions compliant performance cold air intakes. The new system gives the Jeep 3.6L Wrangler JL and Gladiator JT exceptional horsepower and reliability by providing the engine with increased air density, airflow and the best filtration available. The Ram-Air cold air intake adds a tested best-in-class airflow of 782 CFM, a gain of 82% over stock and 21.6% over its closest competitor. The system produces lower temperature air at higher pressure providing air density right at the throttle inlet. As a result, the Banks Ram-Air system boasts a 38% air density improvement compared to the stock intake, two times the increase of its closest competitor. This lower temperature air provides more thermal headroom before the engine hits the detonation limit of the fuel, resulting in more power on hot days. Its durable molded plastic housing is fully enclosed, keeping power-robbing hot air in the engine bay where it belongs and not in the intake system. At the heart of the Ram-Air system is Banks’ new Big-Ass Filter element which is the largest and least restrictive in its class. Like all Banks Ram-Air intakes, the system was designed using computational fluid dynamics, followed by rigorous testing on the flow bench, dynamometer and on-road driving. Available in both oiled and dry variations, Banks’ new Big-Ass filters offer 672 square inches of surface area, 21% more than their closest competitor. This allows for greater dirt collection and more miles between cleaning. The Ram-Air advantage becomes even more pronounced the dirtier the filter gets. Competitive filters clog up and become restrictive long before the Big-Ass Filter. Superior filtration is accomplished by using a proprietary multi-layer woven cloth that keeps even the finest dirt and debris out of the intake system while providing maximum airflow.

• +38% Mass Air Flow Gain. 82% Less restrictive than stock
• 5-Year Limited Warranty

This Part Fits:

Replaces constricted factory setup to flow up to 60% better than stock. Includes Oiled Air Filter Element. Banks Ram-Air Superiority. Open up your 6.8L's breathing with the Banks Ram-Air intake system. With its giant air filter housing, high-flow filter, and streamlined tubing, Banks Ram-Air outflows stock by up to 60 percent for greater power and improved fuel efficiency. Banks bellows accommodate engine movement, preventing component damage and prolonging service life. Meticulously tested by Banks engineers, Banks Ram-Air Intakes are triple validated before the Banks name is stamped on. Key Features: Enclosed housing keeps out hot, power-robbing engine air. Extends service life and requires fewer cleanings. Inhales cooler outside air for more power & MPG. Giant filter maximizes high-flow filtration. Flows up to 60% better than stock. Accommodates engine movement. Replaces constricted factory setup. Extensively tested & validated. Prevents component damage. OILED Air Filter Element. 5-year Limited Warranty. Helps engine run cooler

• Improves flow up to 60%. Improves engine power & MPG
• 5-Year Limited Warranty

Banks Dual Heat Capable Monster-Ram® improves throttle response and fuel economy by eliminating airflow restrictions. The system prevents severe engine damage by replacing the failure-prone factory grid heater with the Banks high-flow intake plate. The factory heater can't fail if it's not there. Monster-Ram® is the only 50-state emissions-compliant RAM intake elbow.Why It's Better. A True Monster Of A RAMThe all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock over 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Banks High-flow coil heater-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

Banks Dual Heat Capable Monster-Ram improves throttle response and fuel economy by eliminating airflow restrictions. The patent-pending system prevents severe engine damage by replacing the failure prone killer grid heater with the Banks high-flow cast intake plate. The factory heater can't fail if it's not there. Monster-Ram is the only 50-state emissions-compliant RAM intake elbow.Why It's Better. A True Monster Of A RAMThe all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Includes high-flow coil heater-Dual heat capable-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

Banks Dual Heat Capable Monster-Ram® improves throttle response and fuel economy by eliminating airflow restrictions. The system prevents severe engine damage by replacing the failure-prone factory grid heater with the Banks high-flow intake plate. The factory heater can't fail if it's not there. Monster-Ram® is the only 50-state emissions-compliant RAM intake elbow.Why It's Better. A True Monster Of A RAMThe all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Includes high-flow coil heater-Dual heat capable-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

Banks Dual Heat Capable Monster-Ram® improves throttle response and fuel economy by eliminating airflow restrictions. The system prevents severe engine damage by replacing the failure-prone factory grid heater with the Banks high-flow intake plate. The factory heater can't fail if it's not there. Monster-Ram® is the only 50-state emissions-compliant RAM intake elbow.Why It's Better. A True Monster Of A RAMThe all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Includes high-flow coil heater-Dual heat capable-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

Banks Dual Heat Capable Monster-Ram® improves throttle response and fuel economy by eliminating airflow restrictions. The system prevents severe engine damage by replacing the failure-prone factory grid heater with the Banks high-flow intake plate. The factory heater can't fail if it's not there. Monster-Ram® is the only 50-state emissions-compliant RAM intake elbow. A True Monster Of A RAMThe all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock over 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Banks High-flow coil heater-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

Banks Dual Heat Capable Monster-Ram® improves throttle response and fuel economy by eliminating airflow restrictions. The system prevents severe engine damage by replacing the failure-prone factory grid heater with the Banks high-flow intake plate. The factory heater can't fail if it's not there. Monster-Ram® is the only 50-state emissions-compliant RAM intake elbow.Why It's Better. A True Monster Of A RAMThe all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock over 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Banks High-flow coil heater-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

Banks Dual Heat Capable Monster-Ram® improves throttle response and fuel economy by eliminating airflow restrictions. The system prevents severe engine damage by replacing the failure-prone factory grid heater with the Banks high-flow intake plate. The factory heater can't fail if it's not there. Monster-Ram® is the only 50-state emissions-compliant RAM intake elbow. Why It's Better. A True Monster Of A RAMThe all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock over 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Banks High-flow coil heater-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

Banks Dual Heat Capable Monster-Ram® improves throttle response and fuel economy by eliminating airflow restrictions. The system prevents severe engine damage by replacing the failure-prone factory grid heater with the Banks high-flow intake plate. The factory heater can't fail if it's not there. Monster-Ram® is the only 50-state emissions-compliant RAM intake elbow. Why It's Better. A True Monster Of A RAMThe all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock over 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Banks High-flow coil heater-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

Banks Dual Heat Capable Monster-Ram® improves throttle response and fuel economy by eliminating airflow restrictions. The system prevents severe engine damage by replacing the failure-prone factory grid heater with the Banks high-flow intake plate. The factory heater can't fail if it's not there. Monster-Ram® is the only 50-state emissions-compliant RAM intake elbow.Why It's Better. A True Monster Of A RAMThe all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock over 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Banks High-flow coil heater-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

Banks Dual Heat Capable Monster-Ram® improves throttle response and fuel economy by eliminating airflow restrictions. The system prevents severe engine damage by replacing the failure-prone factory grid heater with the Banks high-flow intake plate. The factory heater can't fail if it's not there. Monster-Ram® is the only 50-state emissions-compliant RAM intake elbow. Why It's Better. A True Monster Of A RAMThe all new Monster-Ram intake for the 6.7L Cummins in your Ram lives up to its name. It is an absolute MONSTER. We pulled out all the stops when developing it. Gain throttle response you can feel and insurance your wallet will appreciate.Key Features:-Prevents engine damage caused by stock grid heater failure-Quicker throttle response-Improves fuel efficiency-Outflows stock over 88.3%-Optimizes air pressure and distribution-Larger and less restrictive than stock-Raises boost without increasing turbine drive pressure-3-3/8 inch inlet-Four 1/8 inch NPT ports-Banks High-flow coil heater-Accommodates stock mounting points-Includes proprietary fuel line and all hardware

• Prevents killer grid heater bolt failure. Improves throttle response. Dual heat capable. Patent-pending.

This Part Fits:

The Banks Monster-Ram Turbo Inlet for the 2017-2026 Duramax L5P is the only intake elbow that outperforms stock without the destructive effects of turbo surge, caused by competitors. More than a year in development, the Monster-Ram increases air density to the compressor. This results in slower turbo shaft speed and a reduction in time to boost. With slower shaft speeds, throttle response is improved, and turbo life is increased.Key Features: Improved throttle response. Reduced turbo shaft speed. Increased turbo life (thanks to reduced shaft speed). 11% lower turbo drive pressure. 23% greater Gulp Capacity (volume). 17% larger turbo inlet size. 18.7% less restrictive than stock, 11.9% increase in mass air flow over stock. Retains PCV geometry. Cast aluminum. Banks red powder coat. Or Natural aluminum for custom coating. 50-State Emission Compliant CARB-EO D-161-158

• 11% Lower Turbo Drive Pressure, Improves Throttle Response and Turbo Life, No Turbo Surge

This Part Fits:

Monster-Ram raises boost without increasing backpressure at the turbine by Improving airflow from the intercooler. Result: a more responsive, fuel-efficient engine. Has six 1/8-inch NPT ports! Includes boost tube. The Banks Monster Ram is the highest performing Cummins Intake Elbow on the market, outflowing all competitors including our previous designs! Why It's Better. No Other Elbow Beats Banks. At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance, and efficiency are the ultimate goals, but to make it all happen, the engine has to breathe freely without needless restrictions. Finding ways to pump your engine full of cooler, denser air has always been the key. Our High-Ram intakes have always whipped the competition, and now our new 3.5 inch Monster-Ram flat-out destroys even our own previous designs! Key Features: Delivers instant torque. Quicker throttle response. Improves airflow from the intercooler. Larger and less restrictive than stock intake. Raises boost without increasing turbine drive pressure. Uses OEM Boost Tube. Up to six 1/8-inch NPT ports. Out-boosts the competition by up to 56.9%. CNC port-matched for stock heater and Banks Billet Heater Delete. Optional 3.5-inch mandrel-bent boost tube

• Raises boost 1.23 PSI vs stock. Out-boosts competition by up to 56.9%
• The Sky Is The Limit For Performance Expandability

This Part Fits: