Fits 1976-1986 Jeep CJ7.

Strengthen your Jeep's suspension while adding a subtle height increase with Fishbone Offroad Heavy Duty Greaseable Shackles. These shackles are designed to replace flimsy factory hardware with 3/8-inch thick zinc-plated steel, providing significantly better resistance to deflection and trail abuse. The integrated grease zerks allow for easy maintenance of the polyurethane bushings, ensuring quiet operation and smooth suspension cycling without the bind often associated with dry bushings.

This kit provides approximately 1/2-inch of lift and is designed specifically for front-end installation. The increased thickness over stock components helps maintain shackle alignment under load, improving overall handling and durability for both daily driving and off-road use.

• Manufacturer Part Number: FB27225
• Fits 1976-1986 Jeep CJ7 models
• Provides 1/2-inch of suspension lift
• 4-inch center-to-center bolt spacing
• Constructed from heavy-duty 3/8-inch thick steel
• Durable zinc-plated finish for superior corrosion resistance
• Includes greaseable hardware and durable polyurethane bushings
• Sold as a set of 2 for front axle application

Fits 1987-1995 Jeep Wrangler YJ.

Keep emergency lighting within immediate reach with the Fishbone Offroad Front Seat Flashlight Mount. Designed specifically for the YJ platform, this mount solves the problem of loose flashlights rolling under seats or getting buried in gear. It bolts directly to either the driver or passenger side front seat bracket, providing a secure and accessible storage solution for full-sized optics.

Constructed from heavy-duty 11-gauge steel, this bracket is built to withstand the vibrations and impacts of off-road use. The assembly is finished in a durable black powder coat to resist corrosion and blend seamlessly with your Jeep's interior. This kit is engineered specifically to accept standard Maglite D-Cell flashlights using the included mounting clips and hardware.

• Fits 1987-1995 Jeep Wrangler YJ
• Compatible with Maglite D-Cell flashlights
• Mounts to factory driver or passenger seat brackets
• Fabricated from 11-gauge steel for maximum rigidity
• Durable black powder coat finish
• Includes all necessary mounting hardware and clips
• Manufacturer Part Number: FB25107

Fishbone Offroad FB55153 Grab Handles provide a secure, stable point of contact for entering and exiting lifted vehicles or stabilizing yourself during technical off-road maneuvers. Designed for universal mounting on factory or aftermarket roll bars and sport bars, these handles use a robust three-strap configuration to prevent sliding or shifting under load.

Constructed from high-quality black nylon webbing, these handles are engineered for durability in open-cabin environments. The triple-strap design ensures a tight fit around the roll bar tubing, offering superior weight distribution and long-term reliability compared to standard two-strap alternatives.

• Manufactured from heavy-duty black nylon webbing
• Triple-strap mounting system for maximum stability on roll bars or sport bars
• Universal fitment for standard off-road vehicle roll cages
• Proudly Made in the USA
• Sold as a pair
• Manufacturer Part Number: FB55153

Fits select 1976-1986 Jeep CJ-5, CJ-7, and CJ-8 Scrambler models.

Improve your Jeep's leaf spring articulation and ride quality with these Fishbone Offroad Heavy Duty Rear Greaseable Shackles. These shackles are designed to replace flimsy factory components that are prone to binding and accelerated wear. By utilizing a greaseable bolt design, these shackles allow for consistent lubrication of the bushings, which reduces friction and eliminates the suspension squeaks common in older CJ models.

Constructed from laser-cut 3/8-inch steel, these shackles provide the rigidity needed for off-road use while the zinc-plated finish ensures long-term resistance to corrosion and trail debris. Each set includes durable polyurethane bushings that offer better deflection characteristics than standard rubber, maintaining better alignment under load.

• Fits rear suspension only
• 4-inch center-to-center bolt spacing
• Manufactured from heavy-duty 3/8-inch steel
• Corrosion-resistant zinc plating
• Includes high-performance polyurethane bushings
• Greaseable hardware for easy maintenance
• Sold as a set of two (2) shackles
• Manufacturer Part Number: FB27226

Designed for the 1946-1975 Jeep CJ-5, these Fishbone Offroad Heavy Duty Greaseable Shackles provide a durable upgrade for your leaf spring suspension. These shackles are engineered to replace thin factory components with robust 3/8-inch thick steel, finished in zinc plating for superior corrosion resistance during off-road use.

This kit includes two shackles equipped with high-density polyurethane bushings, which offer more stability and a longer service life than traditional rubber. The greaseable design ensures smooth, quiet operation of the suspension cycle and simplifies long-term maintenance. These shackles provide approximately 3/4-inch of lift and can be utilized in either the front or rear positions.

• Fits 1946-1975 Jeep CJ-5 (Front or Rear)
• Construction: 3/8" Thick Zinc Plated Steel
• Bolt Center-to-Center: 4.5"
• Lift Height: 0.75"
• Bushing Material: Greaseable Polyurethane
• Quantity: Set of 2
• Manufacturer Part Number: FB27222

Fits select 1976-1986 Jeep CJ7 and CJ8 Scrambler models.

Strengthen your Jeep's steering system with the Fishbone Offroad HD Steering Box Brace. This heavy-duty component is designed to fully replace the factory steering box mount, which can become a point of failure under the stress of larger tires or aggressive off-road use. By providing a more rigid foundation for the steering gear, this brace helps eliminate flex and improves overall steering precision.

Constructed from 3/8-inch thick raw cold-rolled steel, this mount is built for maximum durability. The raw finish allows you to paint or powder coat the part to match your vehicle's frame or custom color scheme. Please note that installation requires drilling; the provided instructions serve as a precise drilling template to ensure proper alignment.

• Manufactured from 3/8" thick raw cold-rolled steel
• Complete replacement for the factory steering box mount
• Reduces steering box flex for improved handling response
• Raw finish ready for custom paint or coating
• Installation requires drilling (instructions include template)
• Manufacturer Part Number: FB26318

Fits 1984-2001 Jeep Cherokee XJ.

Strengthen your XJ's rear chassis with Fishbone Offroad Rear Bumper Braces. These reinforcement plates are engineered to bolster the factory bumper mounting faces, providing the structural support necessary for high-clearance aftermarket bumpers and heavy tire carriers. By adding threaded bolt-hole locations to the lower frame rail, these braces tie into the unibody more effectively than standard hardware.

Constructed from high-strength uncoated steel, these braces are ready for custom finishing or welding as required by your build. Please note that body cutting is required for a flush, secure installation.

• Reinforces rear bumper mounting surfaces for heavy-duty applications
• Adds lower frame rail threaded mounting points for superior load distribution
• Material: Uncoated Steel
• Required modification: Body cutting necessary for installation
• Manufacturer Part Number: FB26266

Fits 2007-2018 Jeep Wrangler JK 2-Door models.

Maximize the utility of your cargo area with Fishbone Offroad Wheel Well Storage Bins. These bins utilize the often-unused space directly above the rear wheel wells, providing an organized solution for stowing tools, recovery gear, or trail essentials. Designed for durability and a seamless fit, they ensure your gear stays secure even on rough terrain.

• Manufactured from high-strength steel
• Black textured powder coat finish for corrosion and scratch resistance
• Compatible with both factory hardtops and soft tops
• Includes all required mounting hardware for installation
• Sold as a pair for both driver and passenger sides
• Manufacturer Part Number: FB25102

Fits 2007-2018 Jeep Wrangler JK and JKU models.

Keep your emergency lighting secure and within arm's reach with the Fishbone Offroad Front Seat Flashlight Mount. This bracket is designed to eliminate rattles and prevent your gear from rolling on the floorboards during off-road maneuvers. It mounts directly to the front seat frame, providing a permanent and accessible storage solution for your primary illumination tool.

• Precision-cut from heavy-duty 11-gauge steel
• Durable black powder coat finish resists corrosion and trail wear
• Sized specifically to accept standard Maglite D-Cell flashlights
• Includes all necessary mounting hardware and retention clips
• Manufacturer Part Number: FB25091

Fits 2007-2018 Jeep Wrangler JK 4-Door models.

Maximize the utility of your cargo area with Fishbone Offroad Wheel Well Storage Bins. These bins are designed to utilize the often-wasted space directly above the rear wheel wells, providing a secure location for recovery gear, tools, and trail essentials without encroaching on your primary floor space. Engineered for a precise fit in JKU models, they maintain full compatibility with both hardtops and soft tops.

Fabricated from heavy-duty steel and protected by a black textured powder coat finish, these bins are built to withstand trail vibration and resist corrosion. The set includes both driver and passenger side bins and all necessary mounting hardware for a straightforward installation.

• Specifically engineered for 4-door JKU models
• Heavy-duty steel construction for long-term durability
• Corrosion-resistant black textured powder coat finish
• Compatible with factory and aftermarket hardtops or soft tops
• Sold as a pair (Left and Right sides)
• Complete mounting hardware included
• Manufacturer Part Number: FB25081

Fits 2018-2025 Jeep Wrangler JL 4-Door models, including Unlimited, 4xe, Rubicon, Sahara, and Sport trims.

Improve your vehicle's side protection and accessibility with Fishbone Offroad Step Sliders. These heavy-duty sliders are engineered to shield your rocker panels from trail obstacles while providing a functional, stable stepping surface for easier cabin access. The textured black powder coat finish offers excellent corrosion resistance and a rugged aesthetic that complements factory trim.

Designed for a precise fit, these sliders utilize factory mounting locations for a straightforward, bolt-on installation with no drilling required. This makes them an ideal upgrade for enthusiasts seeking reliable off-road protection without permanent vehicle modifications.

• Fits 4-door models only
• Direct bolt-on installation using factory mounting points
• Durable black textured powder coat finish for maximum protection
• Sold as a pair (includes driver and passenger sides)
• Manufacturer Part Number: FB23083

Fits 1997-2006 Jeep Wrangler TJ and 2004-2006 Jeep Wrangler LJ models.

Fishbone Offroad Front Tube Fenders provide the ultimate combination of trail protection and increased wheel well clearance. Designed for Jeep owners who demand durability on technical terrain, these fenders replace the vulnerable factory sheet metal with heavy-duty steel. The integrated 3-inch flare helps contain road debris and mud, while the unique perforated side panels promote better airflow and heat dissipation from the engine bay.

Each set is finished in a durable black textured powder coat to resist corrosion and trail rash. These fenders are precision-engineered for a secure fit and are sold as a complete pair for the front of your vehicle.

• Fits 1997-2006 Jeep Wrangler TJ and LJ
• Heavy-duty steel construction
• Integrated 3-inch flare for added tire coverage
• Perforated side panels for improved engine cooling
• Durable black textured powder coat finish
• Sold as a pair (Driver and Passenger sides)
• Manufacturer Part Number: FB23029F

Fits 1997-2006 Jeep Wrangler TJ.

Defend your rocker panels against trail damage with Fishbone Offroad Steel Rock Sliders. Engineered for durability, these sliders are constructed from 3/16-inch steel with heavy-duty 2-inch diameter, .120-wall tubing to provide a rugged barrier between your Jeep and trail obstacles. The integrated laser-cut step plate offers a secure entry point and additional side protection, finished in a textured black powdercoat for maximum corrosion resistance.

This kit is designed for precise fitment and includes stainless steel countersunk hardware, ensuring a flush, snag-free installation that maintains a clean look on your Wrangler.

• Manufacturer Part Number: FB23028
• 3/16in. steel construction with 2in. diameter, .120-wall tubing
• Black textured powdercoat finish
• Includes laser-cut step plate for cabin access
• Stainless steel countersunk hardware included
• Provides critical side and rocker panel protection

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited JKU (Rubicon, Sahara, Sport, X, and Anniversary Editions).

Add secure, heavy-duty recovery points to your JK with Fishbone Offroad Frame Horn D-Ring Mounts. These mounts are engineered for durability, constructed from solid 3/4-inch metal and finished in a resilient black powder coat to resist corrosion and trail debris. The low-profile design provides a clean look while maintaining maximum clearance for off-road obstacles. These frame mounts are designed to work seamlessly with the Fishbone Offroad Rear Bumper Delete (FB22135), making them ideal for minimalist builds or specialized off-road configurations.

• Solid 3/4-inch metal construction for maximum strength
• Durable black powder-coated finish
• Low-profile frame horn mounting
• Includes two (2) D-rings for immediate recovery use
• Direct fit for Jeep JK frame points
• Manufacturer Part Number: FB22136

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited (Rubicon, Sahara, Sport, Sport S, X).

The Fishbone Offroad Rear Bumper Delete (FB22135) is designed for Jeep owners looking to streamline the rear profile of their vehicle while significantly increasing the departure angle for off-road obstacles. By removing the bulky factory plastic bumper, you gain a cleaner aesthetic and maximum clearance on the trail.

This low-profile plate is manufactured for a precise fit and finished in a durable black powder coat to resist corrosion and match common aftermarket accessories. It is an ideal solution for rigs utilizing chassis-mounted tire carriers or those seeking a minimalist, high-clearance look. This bumper delete integrates seamlessly with Fishbone Offroad D-Ring Frame Mounts (FB22136) for a complete rear recovery solution.

• Manufacturer Part Number: FB22135
• Low-profile design for improved departure angles
• Durable textured black powder-coated finish
• Easy bolt-on installation using factory mounting locations
• Compatible with Fishbone Offroad D-Ring Mounts (FB22136)

Fits 1997-2006 Jeep Wrangler TJ and LJ models, including Rubicon, Sahara, Sport, SE, X, and Unlimited.

The Fishbone Offroad Piranha Front Bumper (FB22048) is a heavy-duty, high-clearance solution designed for off-road durability. At 44 inches wide, this bumper improves approach angles while providing essential protection for your front end. The integrated 1-3/4 inch raised winch guard protects your winch and grill from trail hazards, ensuring your recovery equipment stays safe during difficult crawls.

Manufactured from 3/16-inch steel for maximum impact resistance, this bumper is finished in a rugged black textured powder coat to resist corrosion and scratches. It includes a winch-ready mounting platform and two D-rings to provide reliable recovery points right out of the box.

• Manufacturer Part Number: FB22048
• Construction: 3/16-inch Steel
• Finish: Black Textured Powder Coat
• Width: 44 inches
• Guard: 1-3/4 inch raised winch guard
• Included Hardware: (2) D-rings

Maximize your truck’s utility with the Fishbone Offroad In Bed RotopaX Mount (FB21291). Designed specifically for 2005-2023 Toyota Tacoma models, this bracket provides a secure, dedicated mounting point for your RotopaX containers inside the truck bed. By utilizing the factory bed rails, this mount keeps your fuel, water, or recovery packs organized and accessible without sacrificing floor space.

• Fits 2005-2023 Toyota Tacoma (All trims including TRD Pro, TRD Off-Road, TRD Sport, and SR5)
• Supports standard 2.25in x 2.25in mounting patterns
• Constructed from durable steel with a black powder-coated finish for corrosion resistance
• Easy bolt-on installation utilizing factory mounting points
• Note: Requires a separate mounting interface from RotopaX to secure containers

Fits Jeep models equipped with a tailgate-mounted tire carrier and 5x4.5, 5x5, or 5x5.5 bolt patterns.

The Fishbone Offroad Spare Tire Jerry Can Mount (FB21276) provides a secure and accessible solution for carrying auxiliary fuel or water on the trail. This bracket is designed to mount directly to the factory spare tire carrier, utilizing the existing bolt pattern to sandwich the mount between the carrier and the spare wheel. It is an essential upgrade for overlanding and long-distance off-roading where additional fluid capacity is required.

• Compatible Bolt Patterns: 5x4.5 in, 5x5 in, and 5x5.5 in
• Accommodates Jerrycans with a base dimension of 14 in x 6.75 in
• Engineered to mount onto factory tailgate-mounted tire carriers
• Includes a 7 ft black nylon ratchet strap for adjustable container security
• High-grade stainless steel hardware included for corrosion resistance
• Manufacturer Part Number: FB21276

Fits 2020-2025 Jeep Gladiator JT models across all trim levels including Sport, Mojave, Rubicon, and Overland. This in-bed tire carrier provides a practical solution for securing oversized spares that no longer fit in the factory under-chassis location.

Constructed from durable 1/8-inch steel with a textured black powder-coated finish, this carrier is engineered to support up to a 40-inch tire. Moving your spare to the bed not only makes access easier during recovery but also improves ground clearance at the rear of the vehicle. The design features integrated bungee cord slots for additional cargo utility and utilizes a 5x5 bolt pattern for mounting.

• Fits 2020-2025 Jeep Gladiator JT models
• Supports up to a 40-inch diameter tire
• Heavy-duty 1/8-inch steel construction
• Textured black powder-coated finish for corrosion resistance
• Corrosion-resistant stainless steel hardware included
• Includes (3) M14 chrome lug nuts
• 5x5 wheel bolt pattern
• Integrated bungee cord slots for added utility
• Manufacturer Part Number: FB21213
• Installation: Drilling is required

Fits select 2018-2024 Jeep Wrangler JL models equipped with a Hawse style fairlead.

The Fishbone Offroad Hawse Fairlead License Plate Mount (FB21098) provides a professional solution for maintaining front license plate compliance on winch-equipped vehicles. Designed to bolt directly over any Hawse style fairlead, this bracket features a hinged flip-up design that allows for immediate access to your winch rope during recovery operations without requiring tool-assisted removal.

Built for the trail, the bracket is laser-cut from aluminum to prevent rust and finished in a durable black powder coat for superior corrosion resistance. This mount ensures your plate stays secure during high-vibration off-road driving while providing a clean, integrated look for your front bumper setup.

• Compatible with all standard Hawse style winch fairleads
• Flip-up hinge design provides quick access to winch line
• Constructed from lightweight, corrosion-resistant aluminum
• Durable black powder-coated finish
• Includes all necessary stainless steel mounting hardware
• Manufacturer Part Number: FB21098

Fits 1975-2006 Jeep CJ5, CJ6, CJ7, DJ5, Scrambler, and Wrangler (YJ, TJ, and LJ).

Enhance your doors-off driving experience with the Fishbone Offroad FB21078 Foot Peg Set. Designed for a direct fit into factory lower door hinges, these pegs provide a stable and comfortable resting position for your leg while cruising. Each peg is manufactured from high-strength steel and finished in a gloss black powder coat for long-lasting corrosion resistance and a clean look that matches OE trim.

To protect your vehicle's exterior, Fishbone Offroad includes integrated rubber stops. These bumpers prevent metal-on-metal contact between the peg and the body tub, ensuring your paint stays scratch-free during use. Installation is a simple drop-in process that requires no tools or permanent modifications to the vehicle.

• Material: High-strength steel construction
• Finish: Gloss black powder coat
• Protection: Integrated rubber bumpers prevent paint damage
• Installation: Tool-free installation into factory door hinges
• Quantity: Sold as a pair (set of 2)
• Manufacturer Part Number: FB21078

Fits 1997-2006 Jeep Wrangler TJ and LJ Unlimited (Rubicon, Sahara, Sport, SE, X, and 65th Anniversary Edition).

Strengthen your Jeep's rear recovery points with Fishbone Offroad Bumper to Frame Tie-In Brackets. Designed to resolve the inherent weakness of factory bumper mounting points, these brackets provide the structural reinforcement necessary for safely mounting heavy off-road bumpers and oversized tire carriers. By tying the bumper directly into the vehicle's frame, these brackets ensure even load distribution during recovery or towing operations.

• Manufactured from robust 3/16-inch steel for maximum durability
• Protective textured black powder coat finish resists corrosion and trail debris
• Essential reinforcement for high-stress aftermarket bumper applications
• Designed for straightforward bolt-on installation
• Manufacturer Part Number: FB21074

Fits select 2018-2025 Jeep Wrangler JL/JLU and 2020-2025 Jeep Gladiator JT models.

Mount a full-width 52-inch light bar to your vehicle with the Fishbone Offroad FB21058 Windshield Light Bar Brackets. These brackets are engineered to provide a rock-solid mounting point for overhead lighting, ensuring your light bar stays secure even during high-speed trail runs or technical crawling.

Every set is manufactured from heavy-duty steel and finished with a durable black textured powder coat for long-lasting corrosion resistance. To ensure your factory finish remains pristine, Fishbone includes protective foam gaskets that isolate the steel brackets from the vehicle body. These brackets utilize existing mounting locations for a straightforward installation that doesn't require permanent modification.

• Designed specifically for 52-inch LED light bars
• Durable steel construction with a black textured powder coat finish
• Includes protective foam gaskets to prevent metal-on-metal contact and paint damage
• Sold as a pair (Driver and Passenger sides)
• Light bar sold separately
• Manufacturer Part Number: FB21058

Fits 1997-2006 Jeep Wrangler TJ models equipped with Fishbone Offroad front tube fenders.

Replace bulky factory lighting with Fishbone Offroad 3/4-inch Amber LED Marker and Turn Signal lights. These low-profile LEDs provide a clean, integrated appearance while ensuring your vehicle remains visible on and off the road. Featuring a versatile three-wire design, these units function as both running markers and active turn signals for balanced auxiliary lighting.

This kit is designed specifically for a seamless fit into Fishbone Offroad front tube fenders. Each set includes a pair of amber LEDs, rubber mounting grommets, and wire pigtails for a straightforward installation process. Note: To prevent hyper-flash, a compatible LED flasher relay or inline resistors must be installed to ensure proper functionality.

• Manufacturer Part Number: FB21041
• Light Color: Amber
• Diameter: 3/4-inch
• Wiring: 3-wire dual-function (Marker and Turn Signal)
• Includes: Two (2) LED lights, rubber grommets, and wire pigtails

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited JKU.

The Fishbone Offroad FB21014 light bar bracket provides a heavy-duty mounting solution for a 52-inch overall width overhead LED light bar. Engineered for the JK platform, this bracket maximizes your lighting setup by including integrated pedestal mounts at the base of the pillars to accommodate a pair of 3x3 cube lights. The steel construction ensures stability on rough terrain, preventing light bar vibration and movement.

• Fits 52-inch overall width overhead light bars
• Integrated lower pedestal mounts for 3x3 cube lights
• Manufactured from durable steel
• Black textured powder coat finish for corrosion resistance
• Maintains factory mounting points for a clean installation
• Manufacturer Part Number: FB21014
• Note: Light bar and cube lights are sold separately

Vehicle Fitment

Fits 2018-2025 Jeep Wrangler 4-Door (Unlimited JLU) including 4xe and Rubicon 392 models.

Shield your door sills from scuffs, scratches, and trail debris with Fishbone Offroad Entry Guards. These guards are molded from durable TPU plastic, providing a rugged barrier against the daily wear and tear of entering and exiting your vehicle. The integrated traction treads offer additional grip in wet or muddy conditions, while the embossed Fishbone Offroad logo adds a custom finish to your interior door frame.

• Specifically designed for 2018-2025 Jeep Wrangler JLU (4-Door)
• Constructed from durable, impact-resistant TPU plastic
• Complete 4-piece set including front and rear guards
• Integrated traction treads for enhanced footing
• Features the Fishbone Offroad logo
• Quick and easy adhesive installation
• Manufacturer Part Number: FB15111

Fits select 2018-2025 Jeep Wrangler JL and Unlimited JLU (2-door and 4-door) models including Sport, Sahara, Rubicon, 4xe, and 392.

Protect your Jeep’s rear quarter panels from road salt, gravel, and trail rash with Fishbone Offroad Quarter Panel Chip Guards. These guards are designed to shield the high-impact area behind the rear wheels, preventing the paint chips and corrosion that often occur during off-road use or daily driving on winter roads.

Manufactured from durable black ABS plastic, these guards feature a textured finish that can be installed as-is or painted to match your vehicle’s factory color. Fishbone Offroad provides both permanent and temporary mounting options, giving you the flexibility to choose the installation method that best suits your vehicle.

• Fits 2-door and 4-door models
• Construction: Durable black ABS plastic
• Finish: Textured black, paint-to-match capable
• Mounting: Includes permanent and temporary mounting hardware
• Protects body panels from debris and trail impacts
• Manufacturer Part Number: FB13138