Fits 1997-2006 Jeep Wrangler TJ models. This Kentrol Tailgate Hinge Pair is a heavy-duty solution for replacing worn, sagging, or seized factory hinges. Engineered to restore smooth operation and precise alignment to your TJ's rear swing-out gate, these hinges provide the structural integrity needed to support the tailgate and spare tire assembly.

Each hinge is finished in a durable black powdercoat that offers significantly better corrosion resistance than the original equipment, protecting against rust and road debris. As a direct-fit replacement, these hinges bolt into the factory mounting locations for a straightforward installation that restores the utility and aesthetic of your Jeep's rear entry.

• Direct replacement for 1997-2006 Jeep Wrangler TJ factory hinges
• Durable textured black powdercoat finish for long-term corrosion protection
• High-strength construction prevents tailgate sag and misalignment
• Sold as a complete pair (Driver and Passenger sides)
• Manufacturer Part Number: 50478

Fits 1976-1986 Jeep CJ7.

Restore the functionality and appearance of your Jeep's rear gate with this Kentrol Tailgate Hinge Pair. Designed as a heavy-duty replacement for worn, sagging, or rusted factory hardware, these hinges ensure smooth operation and proper tailgate alignment. Each hinge is finished in a durable black powdercoat to provide long-lasting resistance against corrosion and trail debris while maintaining a clean, classic aesthetic.

• Direct bolt-on installation using factory mounting points
• Heavy-duty construction to support the weight of the tailgate
• Corrosion-resistant black powdercoat finish
• Sold as a complete pair (Set of 2)
• Manufacturer Part Number: 50419

Fits 1976-1986 Jeep CJ7 and CJ8 models.

Restore the functionality and appearance of your Jeep’s rear gate with the Kentrol Tailgate Latch Pair. Designed as a direct replacement for factory hardware, these latches solve the common issue of corroded or sticking mechanisms. Each component is manufactured from durable stainless steel and finished in a brilliant polished silver to provide lasting corrosion resistance and a premium look that stands up to the elements.

• Direct replacement for OE tailgate latches
• High-grade stainless steel construction
• Polished silver finish for a mirror-like shine
• Includes both driver and passenger side latches
• Fits all 1976-1986 CJ7 and CJ8 (Scrambler) models
• Manufacturer Part Number: 30564

Fits 2004-2014 Ford F-150 and 2006-2008 Lincoln Mark LT.

The Dee Zee Tailgate Assist (DZ43200) safely controls the drop rate of your truck's tailgate, preventing it from slamming and reducing impact wear on support cables and hinges. This custom-engineered damper system is designed specifically for each application, ensuring a precise fit that works in conjunction with your vehicle's factory cables.

Installation is straightforward and requires no drilling, utilizing existing factory mounting points for a secure fit. Each kit is tested to withstand the rigors of heavy daily use and provides a smoother, one-handed operation of the tailgate.

• Safely dampens the tailgate opening speed to prevent slamming
• Custom-designed for a precise fit on Ford and Lincoln trucks
• Works in tandem with factory tailgate support cables
• Simple no-drill installation using basic hand tools
• Includes all necessary mounting hardware and instructions
• Manufacturer Part Number: DZ43200

Seal the gap between your truck's tailgate and the bed to prevent dust, dirt, and moisture from compromising your cargo. The TruXedo TruXseal Universal Tailgate Seal is a critical upgrade for any pickup equipped with a tonneau cover, topper, or lid, ensuring the bed remains weather-tight even in harsh environments.

Constructed from premium materials and featuring genuine 3M acrylic foam tape, this seal is engineered for long-term adhesion and resistance to temperature extremes. The universal design allows for a custom fit on most truck models, providing a compressed barrier that fills the factory tolerances where the tailgate meets the bed floor and sidewalls.

• Fits select 1980-2021 Chevrolet, Ford, and GMC trucks (5.9L).
• Constructed from durable weather-resistant foam to maintain flexibility.
• High-strength 3M adhesive backing ensures a secure, long-lasting bond.
• Prevents road grime, snow, and rain from entering the bed area.
• Simple cut-to-fit installation for a variety of tailgate configurations.
• Manufacturer Part Number: 1703206

Fits 1997-2006 Jeep Wrangler (TJ/LJ) including SE, Sahara, Sport, Rubicon, X, and Unlimited models.

When upgrading to 33-inch or 34-inch tires while retaining the factory spare tire carrier, the spare tire often obstructs the stock third brake light. The Rugged Ridge Third Brake Light Spacer (MPN 11585.03) provides a practical solution by elevating the light assembly exactly 2 inches. This lift restores visibility of the center high-mount stop lamp (CHMSL), ensuring you stay compliant with safety standards and visible to trailing drivers.

Built for the trail, this spacer is manufactured from heavy-duty steel and finished in a durable black powder coating to resist corrosion and harsh weather. It is a direct bolt-on component that integrates seamlessly with the original mounting points. This kit is a cost-effective alternative to full aftermarket tire carriers when running oversized rubber on the street or trail.

• Raises third brake light by 2 inches to clear up to 34-inch tires
• Constructed from heavy-duty steel for lasting durability
• Black powder-coated finish resists rust and corrosion
• Simple bolt-on installation using factory mounting points
• Manufacturer Part Number: 11585.03
• Limited 5-Year Warranty

Fits select 1987-1995 Jeep Wrangler YJ (Base, Sahara, Renegade, Sport, and SE).

This Rugged Ridge tailgate hinge set provides a durable, direct-fit solution for replacing worn or rusted factory hardware. Engineered to meet original equipment specifications, these hinges restore smooth tailgate operation and maintain the factory aesthetic without the need for drilling or permanent modifications.

• Direct replacement for 1987-1995 Jeep YJ factory hinges
• High-quality semi-gloss black powder-coated finish for superior corrosion resistance
• OE-style design ensures a precise fit on factory mounting points
• Includes all necessary installation hardware for a complete refresh
• Manufacturer Part Number: 11218.01
• Limited 5-Year Warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler (all submodels). This Rugged Ridge lower tailgate hinge set restores original functionality to your classic Jeep tailgate. These hinges are engineered as direct OE-style replacements for worn, rusted, or seized factory components, ensuring a precise fit and smooth operation.

Constructed for durability, each hinge features a semi-gloss black powder-coated finish designed to resist corrosion and withstand harsh trail conditions. The kit includes all necessary mounting hardware to facilitate a straightforward installation into factory mounting points.

• Direct-fit OE-style replacement for factory lower tailgate hinges
• Durable semi-gloss black powder-coated finish for corrosion resistance
• Includes complete mounting hardware for a trouble-free install
• Sold as a pair for a comprehensive tailgate refresh
• Manufacturer Part Number: 11207.01
• Limited 5-Year Warranty